1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

2768 Commits

Author SHA1 Message Date
James Cotton
aec7dd0b00 Initialize the LEDs early in the bootup process 2012-01-24 14:37:04 -06:00
James Cotton
8e79bc2ee2 Temporarily refactor attitude to directly read the sensors instead of pull from
their queues until the interrupts are working properly
2012-01-24 11:54:23 -06:00
James Cotton
e9552065a9 Reenable the CC3D sensors 2012-01-24 11:03:33 -06:00
James Cotton
466992a907 Migrate some of the CC board settings to the new board_hw_defs 2012-01-24 10:58:40 -06:00
James Cotton
c242ab8b86 Merge branch 'next' into revolution3
Conflicts:
	flight/AHRS/ahrs.c
	flight/AHRS/pios_board.c
	flight/Bootloaders/Revolution/Makefile
	flight/CopterControl/System/pios_board.c
	flight/INS/pios_board.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/System/openpilot.c
	flight/OpenPilot/System/pios_board.c
	flight/PiOS/Boards/STM32103CB_CC_Rev1.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/Makefile
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/test.c
2012-01-24 10:46:35 -06:00
James Cotton
f029567e66 Remove meaningless settings from CC config file 2012-01-24 10:39:35 -06:00
James Cotton
66293a9788 Merge remote-tracking branch 'origin/stac/led-boottime-config' into next 2012-01-24 10:38:33 -06:00
James Cotton
7c22215e0b Patch from Sambas to fix F4 on windows 2012-01-24 10:33:07 -06:00
James Cotton
486cdb5dbb Got CC running again although with altitude and bmp085 disabled as well as the
CC3D drivers.
2012-01-24 10:32:42 -06:00
James Cotton
be50c00b7c Make sure BMA180/L3GD20 can be disabled 2012-01-24 09:23:13 -06:00
James Cotton
4d3af7afbf Add ID test to ADXL345 2012-01-24 09:23:12 -06:00
James Cotton
946c6a7f1d Fix small bugs in pios_board.c relating to adxl345 spi configuration 2012-01-24 09:23:12 -06:00
James Cotton
728c05f973 Crude implementation of sensor reading for CC3D 2012-01-24 09:23:12 -06:00
James Cotton
0cb6b13d33 Add BMA180 to CopterControl 3D. Had to reduce the stack space by 256 bytes.
Some can be reclaimed by making the BMA180 allocate its fifo dynamically but
I'll do that later when it uses FreeRTOS queues for the FIFO.
2012-01-24 09:23:12 -06:00
James Cotton
11471ff68b Update drivers for CC to the new EXTI system and SPI calls 2012-01-24 09:23:12 -06:00
James Cotton
a20d654744 Update the attitude algorithm for CC to use the Gyros and Accels UAVObjects
instead of AttitudeRaw
2012-01-24 09:23:12 -06:00
James Cotton
4cf82815ce Get the right pios_iap.c from next 2012-01-24 09:23:07 -06:00
James Cotton
aaf1c5dfdd Update the F1 SPI library to support multiple NSS lines 2012-01-23 23:27:02 -06:00
James Cotton
5fd458426a Merge branch 'cc3d' into revolution3
Conflicts:
	flight/PiOS/inc/pios_l3gd20.h
	flight/PiOS/pios.h
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-01-23 22:09:45 -06:00
Stacey Sheldon
5907022b6d Merge remote-tracking branch 'origin/stac/ld-2.22-fix' into next 2012-01-23 23:05:52 -05:00
James Cotton
bcb49cbd33 Merge branch 'next' into cc3d
Conflicts:
	flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 17:09:47 -06:00
James Cotton
2524662475 Copy the BMP085 back from next 2012-01-23 16:58:07 -06:00
James Cotton
b01d5c6b87 Include the drivers from the common directory 2012-01-23 16:58:07 -06:00
James Cotton
886d5456ac Update pios_exti for F4 2012-01-23 16:55:54 -06:00
James Cotton
9a12299074 Update the driver cfg structures for the EXTI changes. Make the drivers call
the pios_exti_init instead of their individual implementations.
2012-01-23 16:55:52 -06:00
James Cotton
b2a292e9c4 Move all the drivers to the PiOS/Common directory to prepare for refactoring
the EXTI calls they make to the portable version
2012-01-23 10:11:46 -06:00
James Cotton
c84240e485 Merge branch 'next' into revolution3
Conflicts:
	flight/PiOS/STM32F10x/pios_bmp085.c
	flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 06:51:30 -06:00
James Cotton
21ae37b3de Remove BMP085 driver from F4 target 2012-01-23 06:44:25 -06:00
James Cotton
d864b481a1 Fix a few more merge conflicts 2012-01-23 04:47:35 -06:00
Stacey Sheldon
bfe6676eed exti: rewrite exti layer to improve portability
The exti layer now allows drivers to register interrupt callbacks
during board initialization.  All details of the driver using a
particular EXTI pin have been removed from the EXTI layer so it
can now be used on any board without board-specific modification.

This includes some nice refinements provided by Mike Smith during
initial review.  His original commits have been squashed into this
one.
2012-01-22 23:23:41 -05:00
Stacey Sheldon
dc4aa07a32 board_hw_defs: factor out board-specific hw config definitions
Board specific HW configuration is now collected in a single .c
file for each board.  This HW configuration is #include'd into
the FW, BL and BU builds for each board.

These new .c files are found in:
  flight/board_hw_defs/<board_name>/board_hw_defs.c

Parts of this information were previously duplicated between
the BL and FW builds.  This commit cleans up the duplication.

Using a #include on a .c file is a bit ugly but it allows us
to ensure that all of the symbols in the board_hw_defs.c file
are *ONLY* used in the PIOS_Board_Init() function for each
software build.
2012-01-22 19:41:41 -05:00
Stacey Sheldon
6bb4f0c61d leds: use boot-time config for PiOS LED layer
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00
Stacey Sheldon
3cbf4499e1 ld: make sure current pointer never goes backwards
Fixes linking on ld version 2.22.
2012-01-21 21:18:06 -05:00
James Cotton
cc0cbf0381 Enable IAP code on revolution now 2012-01-21 13:22:39 -06:00
James Cotton
fe44a3d37a Reference correct taskmonitor file compiled in to revolution 2012-01-21 13:22:17 -06:00
James Cotton
e505de7ba0 Remove redundant remap field from merge 2012-01-21 13:22:00 -06:00
James Cotton
838370b3a4 Fix calls to backup registers on F4 2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4 Merge branch 'next' into revolution3
Conflicts:
	flight/Bootloaders/CopterControl/Makefile
	flight/Bootloaders/PipXtreme/Makefile
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/CopterControl/Makefile
	flight/INS/inc/pios_config.h
	flight/Libraries/taskmonitor.c
	flight/Modules/Altitude/altitude.c
	flight/Modules/Attitude/attitude.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/Makefile.posix
	flight/OpenPilot/System/inc/pios_usb_board_data.h
	flight/OpenPilot/System/inc/taskmonitor.h
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/System/taskmonitor.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_bmp085.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/pios.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/System/inc/taskmonitor.h
	flight/Revolution/System/taskmonitor.c
	ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
	shared/uavobjectdefinition/systemalarms.xml
	shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
f8e59443b8 If the BMA180 isn't read when an IRQ fires (because the flash chip has claimed
the bus) then it won't fire another interrupt until read.  For now this is
dealt with in the sensor loop by forcing a read when the fifo is empty.
2012-01-21 10:13:46 -06:00
James Cotton
f6db859e4f Fix bug in flash driver where it could assert CS line after failing to claim
the bus.  Also added a "claimed" flag to the device structure.
2012-01-21 09:57:12 -06:00
James Cotton
5dbbfec8a9 Make the BMA180 driver use the appropriate claim method from the ISR. Also
slow down this bus to 10 MHz.
2012-01-21 09:57:02 -06:00
James Cotton
ff0bd87f4e PIOS SPI: Add a second claim bus method for use in ISR. This has no timeout
and uses an ISR safe queue claiming method.  This avoids deadlocks when ISR
blocks other tasks from freeing the bus.
2012-01-21 09:07:06 -06:00
James Cotton
ec903449cd Remove line that bypassed the BMA180 startup test 2012-01-21 08:46:32 -06:00
James Cotton
6d72678086 Add timeout in the sensor task for reading sensors to stop the watchdog firing.
All sensors should later be converted to use FreeRTOS queues.
2012-01-21 08:32:41 -06:00
James Cotton
476cb4d9c2 Unfortunately for now hardcoding new LED configuration. Need to generalize LED
out to a proper run-time configuration.  This unfortunately breaks a general
firmware for now.
2012-01-20 15:45:51 -06:00
James Cotton
8935614a3f Switch the gyro driver loaded based on the board revision flag from the
bootloader
2012-01-20 14:52:05 -06:00
James Cotton
a252ee134a Fix the l3gd20 initialization in pios_board.c and also change the (ugly)
hardcoded exti system to use line3 on F1xx for L3GD20
2012-01-20 14:39:05 -06:00
James Cotton
c76e9f2d7a Updates to the l3gd20 driver for stm32f1xx. Need to eventually merge these
drivers with F4 drivers.
2012-01-20 14:36:16 -06:00
James Cotton
4f28c8d48e Change the init structures to be const in the std periph library for exti 2012-01-20 14:35:27 -06:00
James Cotton
a5d006d1a9 Set up the SPI interface to the l3gd20 2012-01-20 14:20:37 -06:00
James Cotton
8f535bd28c Import of l3gd20 driver from revo branch 2012-01-20 13:42:58 -06:00
James Cotton
7f284596f2 Attempting to get flash and BMA180 to coexist 2012-01-20 13:33:21 -06:00
James Cotton
1e8811362e On revolution attach the flash chip to the accel bus now. Also extended the
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
2012-01-20 07:37:47 -06:00
Stacey Sheldon
64202ce092 Merge remote-tracking branch 'origin/stac/i2c_decoupling' into next 2012-01-17 22:35:36 -05:00
Stacey Sheldon
ad141c908a Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next 2012-01-17 22:26:38 -05:00
James Cotton
1b5e776dc5 Hardcoded scale for now since it isn't picking up from the cfg structure. 2012-01-17 19:53:20 -06:00
James Cotton
ce2d0fcbb1 L3GD20 data now running through IRQ -> FIFO 2012-01-17 19:36:32 -06:00
James Cotton
35025303cd Getting data from gyro. 2012-01-17 19:29:38 -06:00
Stacey Sheldon
bffb184b7a usb: add standard boilerplate to new files 2012-01-16 21:32:52 -05:00
Stacey Sheldon
ee0895aa77 usb hid: remove stale files from pipx
These files are no longer relevent for USB configuration.
2012-01-16 21:31:07 -05:00
Stacey Sheldon
3bda0f450d bootfault: force fault when no telemetry available on OP too
If no telemetry link is configured, this will force the board
to reset before finishing init.  The BootFault logic will
catch this after 3 resets and will boot with default hwsettings
on the next reset.

This won't currently ever fire on OP though since we always
configure the serial telemetry interface.  This just makes sure
the pattern is present in case anyone decides to compile without
serial telemetry.
2012-01-15 23:04:31 -05:00
Stacey Sheldon
8cd4816d7b taskmonitor: move taskmonitor into flight/Libraries
taskmonitor.[ch] existed as (nearly) identical copies under
CC and OP directories.  Both builds now reference the common
version under Libraries.
2012-01-15 21:37:10 -05:00
Stacey Sheldon
387ea77d30 diagnostics: enable DIAG_TASKS on OP board by default 2012-01-15 18:16:50 -05:00
Stacey Sheldon
b05697c2cf taskinfo: ensure usage of TaskInfo uavo is covered by DIAG_TASKS
OpenPilot platform (and thus sim too) was missed when the
DIAG_TASKS macro was broken out from the DIAGNOSTICS macro.

This allowed accesses to the TaskInfo UAVO even though it hadn't
been initialized.
2012-01-15 18:16:50 -05:00
Stacey Sheldon
0575b45378 usb: make USB usage depend on PiOS config
USB is not supported on sim platforms.  Let PiOS
config determine when we use it.
2012-01-15 18:16:49 -05:00
Stacey Sheldon
c97b108a1f bootfault: make IAP usage depend on PiOS config
The sim platforms don't support an IAP mechanism.  Let
PiOS config control when we try to use it.
2012-01-15 18:16:49 -05:00
Oleg Semyonov
912bea559f Add stick deadband option for Roll/Pitch/Yaw inputs to firmware 2012-01-15 21:13:22 +02:00
Stacey Sheldon
27ceb7ea92 modules: Allow optional modules to be used as built-in
Some modules are written such that they can be included
or excluded at runtime.  These are added to the OPTMODULES
list in the makefile for a given board.

This change provides a mechanism to allow a build to force
a given module to be built-in (ie. always initialized)
regardless of the configuration in hwsettings.

The main use case for this is to handle a module being optional
on one platform but essential on another.

All modules added to the MODULES list in the Makefile will
automatically result in a matching #define in the form
  MODULE_TheModuleName_BUILTIN
being defined in the CFLAGS for all compiled source.

Note that the capitalization of TheModuleName must match
exactly the capitalization used in the MODULES list.
2012-01-14 16:55:55 -05:00
Stacey Sheldon
53e9ef06b4 altitude: add optional altitude module 2012-01-14 15:38:56 -05:00
Stacey Sheldon
717c1311e6 altitude: allow altitude to be an optional module 2012-01-14 15:38:56 -05:00
Stacey Sheldon
bae08fcad0 bmp085: decouple i2c adapter
Let the bmp085 be attached to different adapters for different
boards.
2012-01-14 15:38:56 -05:00
Stacey Sheldon
4cb0c41338 bmp085: only use eoc and drdy gpios when available
When the bmp085 chip is on an external board, we don't
have access to the eoc and drdy gpio lines.  Only use
them when available.
2012-01-14 15:38:56 -05:00
Stacey Sheldon
a0089f072a i2c: rename main adapter to flexi adapter on CC 2012-01-14 15:38:56 -05:00
Stacey Sheldon
feacec468d i2c: compile-time decoupling of i2c devices from adapters
This allows each device to be moved (at compile time) to a
different adapter.  This is the first step to allowing devices
to be attached to different i2c adapters.
2012-01-14 15:38:56 -05:00
Stacey Sheldon
ec6d550225 i2c: allow i2c adapters to remap pin functions
Allows us to support more complex pin configurations
for i2c.
2012-01-14 15:38:55 -05:00
Stacey Sheldon
a51bf72bc7 usb: allow runtime selection of USB descriptors via hwsettings 2012-01-14 14:28:15 -05:00
Stacey Sheldon
1d14ab00e1 safeboot: add safe boot support to OP and PIPX bootloaders
Application support for OP and PIPX will show up in future
commits.
2012-01-14 14:28:11 -05:00
Stacey Sheldon
2d27c54d48 com_msg: Create new message based COM layer for bootloaders
The main purpose of this new COM implementation is that it is
much simpler, and requires less code space.  This takes a bit
of the pressure off of the CC bootloader which was right at
the limit of available code space in the bootloader partition.

This is not intended to ever be used by the application.

This driver also formalizes the assumptions in the bootloader's
usage of the COM layer.  All messages are assumed to arrive
in atomic chunks from the HID layer.
2012-01-14 14:23:18 -05:00
James Cotton
147cd7eede Fix correct library.mk file 2012-01-08 09:27:32 +01:00
James Cotton
8b42fbeafc Revert "Fix case in library.mk to stop Brian bitching :)"
This reverts commit d39e818ca6.
2012-01-08 09:27:13 +01:00
James Cotton
d39e818ca6 Fix case in library.mk to stop Brian bitching :) 2012-01-08 09:10:56 +01:00
James Cotton
ebbe1bd497 Some beginning work on the l3gd20 driver 2012-01-08 09:07:07 +01:00
Stacey Sheldon
b0d1551cc2 Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next 2012-01-07 13:35:42 -05:00
Stacey Sheldon
a86abcd140 usb cdc: fix index of first interface in IAD
This error resulted in the HID interface being non
functional on windows platforms.
2012-01-07 09:46:12 -05:00
James Cotton
cc47520baa Checking ID on ST gyro works 2012-01-04 23:23:42 -06:00
James Cotton
0fbcf7723d Code to disable all gyros. All modules now running. 2012-01-04 22:37:15 -06:00
James Cotton
5ee9c8008e Temporarily swap serial ports while debugging 2012-01-04 22:19:13 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
e1c21462b0 Delete another unused file 2012-01-04 19:47:06 -06:00
James Cotton
d5eb38a065 Remove references to deprecated targets 2012-01-04 19:42:45 -06:00
James Cotton
cce351bb9a Delete references to unused objects 2012-01-04 19:37:38 -06:00
James Cotton
0da6109871 Update the F4 copyright headers to 2012 2012-01-04 19:29:29 -06:00
Stacey Sheldon
3bc45b0036 usb cdc: use proper macro for CDC mgmt endpoint packet size
The hard-coded value (16) in the descriptor differed from the
macro (32) which was used to configure the low-level USB HW
block in the STM32.
2012-01-04 00:38:19 -05:00
James Cotton
d2ce7761c5 Add derivative term 2012-01-03 12:37:18 -06:00
Stacey Sheldon
025ed0f43c Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next
Conflicts:
	HISTORY.txt
2012-01-03 00:02:45 -05:00
Stacey Sheldon
e22bc0c51b copyright: remove incorrect attribution in boilerplate text
These files do not contain content from the ID in the header.
This name seems to have been cut/pasted all over throughout
the openpilot source tree and should be removed from any files
that should not rightfully be attributed to this person.
2012-01-02 23:33:07 -05:00
Stacey Sheldon
8d8715c8c1 copyright: add/correct GPL + copyright boilerplate
I missed some of the boilerplate text on some of the
new files I've added recently.  Fixed.
2012-01-02 23:28:53 -05:00
Stacey Sheldon
4d2760f11d cc bl: allow bootloader to force safe-boot into firmware
This can be used by the GCS firmware uploader widget to boot
the firmware with a (temporarily) defaulted hwsettings uavo
so that a user can easily recover from a bad/incompatible
hwsettings configuration without wiping all settings.

This uses the same mechanism that the BootFault auto-recovery
code already uses in the CC firmware.  The auto-recovery is
triggered by setting the failed-boot counter to a maximum
value forcing recovery on the next FW init.
2012-01-02 14:27:06 -05:00
Stacey Sheldon
481a13609e com: remove all references to PIOS_COM_ReceiveBufferUsed()
The PIOS_COM_ReceiveBufferUsed() function call is no longer
necessary since the same semantics can be achieved using calls
to PIOS_COM_ReceiveBuffer().
2012-01-02 14:27:06 -05:00
Stacey Sheldon
b94f4b49a4 usb: major refactoring of USB descriptors, CDC and HID
Summary of changes:
 * USB CDC and HID drivers are completely split apart.
   * This will allow different max buffer sizes for HID and CDC.
 * USB descriptors have been overhauled:
   * Proper structs/macros/enums declared for USB (see pios_usb_defs.h)
   * Two common descriptor definitions.  One for HID+CDC another for HID only.
     See pios_usb_desc_{hid_cdc,hid_only}.c for details.
   * Long standing bugs in OP USB descriptors became much more obvious with the
     new struct definitions.
   * Board specific USB initialization is now in pios_usb_board_data.h in each build target.
   * Definition of USB descriptors is now entirely indpendent of STM32 libs.
     Glue into STM32 libs is provided by pios_usbhook.c.
 * Removed a lot of stale/irrelevant USB #defines throughout the tree.
 * Improved naming consistency throughout USB code:
   * PIOS_USB_HID_* now refers to the HID endpoint code.
   * PIOS_USB_CDC_* now refers to the CDC endpoint code.
   * PIOS_USB_* now refers to the low-level USB code.
   * PIOS_USB_BOARD_* now refers to board-specific USB data
   * PIOS_USBHOOK_* is glue between PIOS and STM32 USB libs.
   * struct usb_* and enum usb_* and USB_* and HID_* are all types from the USB spec.
 * Shrunk the buffer size on the CDC call mgmt endpoint to save some RAM.
 * Made a few more USB related variables static to save some RAM.
2012-01-02 14:27:06 -05:00
Stacey Sheldon
7f03195aba stm32 usb: allow descriptor data to be const through API
This allows a few more data structures to be const to save
some RAM.
2012-01-02 14:27:06 -05:00
Oleg Semyonov
77a459af5c Merge remote branch 'origin/next' into os/TxPID-module 2012-01-02 14:49:54 +02:00
Oleg Semyonov
b01e332e03 CameraStab: rename UAVO field 2012-01-02 14:27:05 +02:00
Oleg Semyonov
65abb8f819 CameraStab: small optimization, freed 8 more heap bytes 2012-01-02 14:27:00 +02:00
Oleg Semyonov
406cff296d CameraStab: bypass LPF calculation if ResponseTime is zero 2012-01-02 14:26:58 +02:00
Oleg Semyonov
e11904c42f CameraStab: change ResponseTime type from float to int16 2012-01-02 14:26:56 +02:00
Oleg Semyonov
2eb5130a7c CameraStab: new camera stabilization mode and low-pass stick input filtering
This patch is based on work of Crubier (LPF) and Cossacs (AxisLock mode).
I've just reworked it a bit by adding a dynamic memory allocation for
static module data.
2012-01-02 14:26:54 +02:00
James Cotton
ef05cafaca Merge branch 'revolution' into altitudehold
Conflicts:
	flight/Libraries/insgps13state.c
	flight/OpenPilot/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-01-01 10:50:35 -06:00
Stacey Sheldon
075eb65603 bootfault: fail initialization if no telemetry link is configured
This detects a locked out state and fails the init.  The new
bootfault detection code will automatically drop to default
hwsettings after 3 consecutive boot failures.  That will put
the board back into an unlocked state where the user can now
enable a telemetry link using the GCS and everything will be
OK.

NOTE: Any configured telemetry link will be considered enough
      to boot up.  If you only configure a serial telemetry
      link but don't know how to hook anything up to it, this
      will not save you.

As the ultimate recovery, you can always load firmware on the
board that wipes the settings entirely and start over.
2011-12-31 13:08:30 -05:00
Stacey Sheldon
6c192f67ee gasp: delete clutter 2011-12-31 13:03:49 -05:00
Stacey Sheldon
e7053c77f0 usb config: remove unused macro for number of endpoints
This is no longer referenced and is confusing.
2011-12-31 13:02:43 -05:00
Stacey Sheldon
5c0921e92c fault: add optional fault insertion module
This module and its associated settings uavo can be used
to test various fault conditions during initialization.

To enable the module, add the TEST_FAULTS=YES to your make
command line:
  make fw_coptercontrol TEST_FAULTS=YES

Once this module is part of your firmware load, you can
enable it in the hwsettings uavo and then select the
type of fault to insert by editing the faultsettings uavo.
On the next reset, the configured fault will be inserted
into the init sequence to allow you to test the boot fault
recovery code.

With a fault inserted, you should see 3 failed boot attempts
followed by a successful (recovery) boot.  You will see the
BootFault alarm set to Critical, and the RAM version of your
hwsettings will be reset to defaults.  Since the defaults have
all optional modules disabled, the fault module will be out of
the way during the recovery boot.

You can then "Load" the flash version of the hwsettings uavo
in the object browser, disable the Fault module and then "Save"
the hwsettings module back to the board.  The next reset will
boot normally without the fault inserted.
2011-12-30 23:05:39 -05:00
Stacey Sheldon
f4f0dab764 fixup make combridge an optional module 2011-12-30 23:05:39 -05:00
Stacey Sheldon
f886af186d bootfault: add support for recovery from init failures
After 3 failed warm start attempts, the init sequence
will force the RAM version of the HWSettings object
to its defaults.  This should allow a user to regain
connectivity to a board that is continually faulting
during init.

This is accomplished by:
 - Incrementing a boot counter that is stored in the
   STM32 BKP registers.  These registers survive a
   warm start but are cleared on a cold start (ie. powerup).
 - On multiple failures, force hwsettings to defaults
   and raise the (new) BootFault alarm to prevent arming.
 - Resetting the boot counter whenever the system manages
   to successfully run the System Module task.

NOTE: This does not actually change the hwsettings object in
      flash.  That's up to the user.

This is intended to catch ONLY faults during early initialization.
It should not be used to recover from faults after the application
is up and running.
2011-12-30 23:05:38 -05:00
Stacey Sheldon
b91f40eb94 iap: extend API to support read/write of boot counter
Also clean up unused/obsolete definitions.
2011-12-30 23:05:38 -05:00
Stacey Sheldon
1543a6dbd3 hwsettings: allow disabling of USB telemetry entirely
The GCS hwsettings config widget now disallows any
configuration that disables both HID and VCP telemetry
over the USB port.

The firmware will allow it if the UAVObj is set manually.

This allows a mechanism to reduce RAM usage by another
500 more bytes if USB telemetry can be sacrificed in
certain configurations.
2011-12-30 23:05:38 -05:00
Stacey Sheldon
45615b5812 com: reduce buffer sizes on com interfaces on CC
Now that the COM layer fragments to the underlying
buffer sizes, the COM layer buffers can shrink below
single message sizes.
2011-12-30 23:05:38 -05:00
Stacey Sheldon
2cf1fe93c6 com: don't block forever waiting for a transmitter
Not all transmitters will continue to run when disconnected.
USB is one example of this.  When the USB cable was disconnected,
any transmitter blocked here would wait forever.

This was particularly noticeable when the telemetry Tx task
blocked forever on USB disconnect.  This also resulted in
the telemetry Rx task blocking forever waiting on the UAVTalk
connection lock.

We now block for a max of 5s waiting for space in the transmit
buffer.
2011-12-30 23:05:37 -05:00
Stacey Sheldon
7c03875013 diag-tasks: make taskinfo diagnostics a separate enable
This allows task stack analysis without turning on all
of the other diagnostics.
2011-12-30 23:05:37 -05:00
Stacey Sheldon
56c4ff8f40 com-bridge: add support for bridging to flexiport 2011-12-30 23:05:37 -05:00
Stacey Sheldon
60969b57d8 usb-hid: split apart hwsettings for HID and VCP ports
This allows the HID and VCP functions to be configured
separately so that additional functions can be more easily
bound to the VCP port.

This change also provides a safety net that forces either
the HID or VCP to be configured for USB Telemetry.  This
safety net may vanish in the future once the GCS can check
it.  Disabling USB Telemetry entirely would save more than
400 bytes of RAM.
2011-12-30 23:05:37 -05:00
Stacey Sheldon
ab135aa00b com-bridge: Make com-bridge an optional (and configurable) module 2011-12-30 23:05:36 -05:00
Stacey Sheldon
5b3227d1ff com: reduce buffer sizes for com layer
This saves a few hundred bytes of RAM in a typical
configuration.
2011-12-30 23:05:36 -05:00
Stacey Sheldon
785a7ccd88 uavtalk: convert tx to use blocking send routines
The uavtalk layer was previously implementing a poor
version of packet fragmentation based on a hard-coded
max packet size.  Since this was hard-coded, there was
no guarantee that it would match the underlying devices.

Now that the COM layer sending routines support fragmentation,
remove fragmentation and use the COM layer directly.

This will support future buffer size reductions in the COM
layer.
2011-12-30 23:05:36 -05:00
Stacey Sheldon
16619584e4 usb cdc: return valid data in response to SetLineCoding 2011-12-30 23:05:36 -05:00
Stacey Sheldon
a68f5a4fc9 com-bridge: detect lost characters on transmit 2011-12-30 23:05:36 -05:00
Stacey Sheldon
80e0be3cec com: fragment transmitted buffers to match underlying device
PIOS_COM_SendBufferNonBlocking() will now fragment its buffer
to match the max size of the underlying device.

This allows the buffer size of the underlying device to shrink
below the maximum message size, thus allowing us to use smaller
buffers on memory-constrained platforms.
2011-12-30 23:05:36 -05:00
Stacey Sheldon
407bec0c95 usb cdc: track oversized rx buffers 2011-12-30 23:05:35 -05:00
Stacey Sheldon
b858cf387e com: track dropped bytes on rx for usart and usb com 2011-12-30 23:05:35 -05:00
Stacey Sheldon
2040645171 com: Use all bytes in Tx buffer
Code would previously fail Tx if we happen to send data
that happened to be exactly the size of the available space
in the tx buffer.
2011-12-30 23:05:35 -05:00
Stacey Sheldon
34af9ac92d usb_com: NAK rather than STALL on buffer full
STALL should only be used to indicate an error has occurred.
NAK is the correct mechanism to provide backpressure.
2011-12-30 23:05:35 -05:00
Stacey Sheldon
e2bb7140fe usb cdc: allow use of entire rx buffer
Previously, the code only allowed n-1 bytes of the
available space to be used.
2011-12-30 23:05:35 -05:00
Stacey Sheldon
86aead52ce usb cdc: only pass valid bytes from USB rx up to com layer
Previously, up to 63 random bytes would be passed to the COM
layer and would be delivered to the application as though
the far end had sent them.
2011-12-30 23:05:35 -05:00
Stacey Sheldon
f54c0552ce com: make sure we know when a higher prio task is woken 2011-12-30 23:05:34 -05:00
Stacey Sheldon
202b1bd428 com: Always kick rx_start if we got zero bytes
This will ensure that we kick rx_start at least once every
time that a user tries to receive bytes from the underlying
device.
2011-12-30 23:05:34 -05:00
Stacey Sheldon
64f498e48a com-bridge: add usart to usb vcp bridge 2011-12-30 23:05:34 -05:00
Stacey Sheldon
504cf3417f init: collapse usart definitions for generic usage
Telemetry and GPS usarts are generic users of the uart
devices.  This collapses the duplicated usart configuration
structs into a single generic one.
2011-12-30 23:05:34 -05:00
Stacey Sheldon
eebdda6276 usb cdc: make HID/CDC configurable in hwsettings 2011-12-30 23:05:34 -05:00
Stacey Sheldon
e6ead85857 usb cdc: fix device descriptor to work on Mac
Apple is very particular about requiring the bDeviceClass
to be set to 2 (Commmunication Device) even for composite
devices which seems wrong.

Device is enumerated without error on Mac now.  Not sure if it
works though.
2011-12-30 23:05:34 -05:00
Stacey Sheldon
617a30c07c usb cdc: attach telemetry to CDC rather than HID 2011-12-30 23:05:34 -05:00
Stacey Sheldon
59cb489e01 usb: clean up pios hooks into stm32 usb_core
Reduced scope of many variables since they were being
exposed unnecessarily.

Renamed pios_usb_hid_prop code to pios_usbhook to reflect
the fact that it implements all of the callout functions
that are hooked into the stm32 usb library.
2011-12-30 23:05:33 -05:00
Stacey Sheldon
c0259dc616 usb cdc: USB composite device with HID + VCP 2011-12-30 23:05:33 -05:00
James Cotton
25dfb5463e Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by
default.
2011-12-29 02:08:13 -06:00
James Cotton
c080080810 Add ability to change the SPI bus runs at 2011-12-29 00:09:53 -06:00
James Cotton
bf98630851 Add streaming the sensor data out of the serial port 2011-12-26 17:52:45 -06:00
James Cotton
9bf06bbd3e Force the loading of the sensor gains and biases at the beginning 2011-12-24 16:14:28 -06:00
James Cotton
1092ac3184 Use the scale and bias terms for hte mag and accel 2011-12-24 15:58:12 -06:00
James Cotton
05da41a79b Get FirmwareIAP object working on revo 2011-12-24 13:15:56 -06:00
James Cotton
569b201b58 Move the bl_helper out of the common directory as it isn't 2011-12-24 13:10:23 -06:00
James Cotton
5d4da2213f Accidentally used floating point when parsing NEMA. Lost resolution on
position.
2011-12-24 10:37:30 -06:00
Oleg Semyonov
7fbbb0e6af Merge remote branch 'origin/next' into os/TxPID-module 2011-12-24 15:44:16 +02:00
Oleg Semyonov
495a8f2836 TxPID: initialize the AccessoryDesired object before use its handle
Also save few bytes of static RAM and add PIOS_Assert(0) for unhandled cases.
2011-12-24 15:37:14 +02:00
James Cotton
0b00e748a9 OP-565: Added the ability to do a trim flight to compute the accels for level flight 2011-12-21 15:25:00 -06:00
James Cotton
dd89d232ba Add a magnetometer bias term although currently hardcoded to my board 2011-12-15 00:57:19 -06:00
James Cotton
0432dd450e Enable the mag to be used in the complimentary filter to stabilize the yaw
direction
2011-12-15 00:56:50 -06:00
James Cotton
2240ad924a Fix the orientation of the magnetometer 2011-12-15 00:46:43 -06:00
James Cotton
43ed6cd89c Need to initialize the HomeLocation object 2011-12-14 14:08:03 -06:00
James Cotton
9148bb2c65 Make sure the sensors module grabs the sesor biases initially. 2011-12-14 10:38:43 -06:00
James Cotton
6dbad243db Convert the CoordinateConversion functions to all be float until I determine
how to use doubles safely on F4.
2011-12-14 02:08:14 -06:00
James Cotton
09864a8cf6 Get outdoor EKF running although need to add in the ability to swap modes
(probably).
2011-12-14 02:07:33 -06:00
James Cotton
fd8899018f Get EKF running 2011-12-14 01:54:06 -06:00
James Cotton
ed7cbd5a6c Have to initialize the BaroAltitude object ini the init section for it to show
up on telemetry
2011-12-13 23:27:26 -06:00
James Cotton
9f50391fc5 Merge branch 'next' into revolution_sensors
Conflicts:
	ground/openpilotgcs/src/plugins/coreplugin/OpenPilotGCS.xml
2011-12-13 20:50:10 -06:00
James Cotton
a37a17a4fb Created a separate Sensor module and Attitude module for revolution 2011-12-12 21:40:39 -06:00
James Cotton
53cb5b67d1 Make the revo attitude now use the separate gyro object. CopterControl
attitude still needs an update.
2011-12-12 13:28:35 -06:00
James Cotton
d22e0e66dd Create separate UAVOs for the sensors. 2011-12-12 13:05:40 -06:00
James Cotton
7273f87f9b Fix NMEA parsing for M4 FPU 2011-12-12 09:47:11 -06:00
James Cotton
a9c61845af Create a separate task for sensors and attitude on revo. 2011-12-12 00:47:16 -06:00
James Cotton
33a12d829e Merge branch 'next' into revolution
Conflicts:
	flight/PiOS/Common/pios_flashfs_objlist.c
2011-12-11 22:55:54 -06:00
Oleg Semyonov
10287e3e29 CC: rename ReceiverPort PPM+Servo (Servo) options to PPM+Outputs (Outputs) 2011-12-11 22:52:51 +02:00
James Cotton
162b0d7f75 Because the UAVO field sorting required for revo changes all the object IDs,
trigger a flash wipe on all existing boards with this upgrade.
2011-12-10 14:13:28 -06:00
Corvus Corax
a0cd71abe6 UAVObjects ; Modules/ManualControl: Fixed metadata interface and segfault when retrieving it 2011-11-30 09:20:46 +01:00
James Cotton
44ca9736df Fix floating point calculation in NMEA parser and delete duplicate of NMEA
functions
2011-11-28 09:36:31 -06:00
James Cotton
43fa9e702e Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks
up though.
2011-11-28 09:11:13 -06:00
James Cotton
c33816dd79 Force mode switch to be floating point so F4 works 2011-11-28 09:10:26 -06:00
James Cotton
671c7537a0 Reorganize the pios_config.c file for revolution 2011-11-28 08:29:14 -06:00
James Cotton
1af66fc3d2 Get rid of 500 ms delay in startup for the pios_sys so that servos start
properly but a delay is still needs to get MPU6000 up right.  Fucking POS.
2011-11-27 18:05:20 -06:00
James Cotton
9357960268 Get rid of old bootloader code for revolution using the ahrs spi link 2011-11-27 18:04:31 -06:00
James Cotton
f7f94011ee Damnit. For higher bus speeds MPU6000 chip must be initialized twice in a row.
WTF piece of shit.
2011-11-27 02:35:08 -06:00
James Cotton
deea7cde41 Speed up coms to MPU6000 2011-11-27 01:51:43 -06:00
James Cotton
57e7126979 Increase stack size for manualcontrol. This might need to be applied to main
code.
2011-11-27 01:51:23 -06:00
James Cotton
f7d13ebd57 Hack to tweak the gyro gain for now although its too far out at the moment so
something isn't configured properly.  Possibly it is staying in 250 deg/s mode.
Also make sure if the MPU6000 fifo backs up to pull extra data.
2011-11-27 01:22:37 -06:00
James Cotton
8bbc767a4e Get the pressure sensor working and reading into Revolution 2011-11-27 00:52:09 -06:00
James Cotton
cd65df013e Merge branch 'next' into revolution
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-11-26 22:52:32 -06:00
James Cotton
13729f854e PiOS F4: Fix PWM timer interrupts and enable PWM input 2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22 Spektrum support for Revolution 2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7 F4 PiOS: Reimplement the RTC logic for F4 2011-11-26 22:13:57 -06:00
James Cotton
b11a4f7405 Clean up the actuator module for floating point usage. Also there was a bug I
don't understand where the channels should be scaled AFTER all of them are
computed.  It feels like a memory overwriting bug and needs followup.
2011-11-26 16:12:32 -06:00
James Cotton
07e3ad10af Force some floating point units to be safe 2011-11-26 15:52:25 -06:00
James Cotton
04f4afce46 Set idle load for revo 2011-11-26 15:52:04 -06:00
James Cotton
8c0db424fa Fix long subtle bug where failsafe didn't show the output values it was using 2011-11-26 15:51:24 -06:00
James Cotton
c70a9a5381 Sanitize the floating point math in systemmod.c to be consistently floating and
not double
2011-11-26 15:16:16 -06:00
Oleg Semyonov
1f60f80053 Bring back the ERASE_FLASH option support for SettingsEraseFirmware 2011-11-26 22:57:33 +02:00
James Cotton
d3314f041a MPU6000: Bring SPI down to 5 Mhz - much closer to spec 2011-11-26 14:56:28 -06:00
James Cotton
99123372d0 TO BE REVERTED: Temporary patch to make the w25x driver work with the revo m25p
chip.  Need to abstract out the erase commands into a general pios_spi_flash
driver.
2011-11-26 14:55:16 -06:00
James Cotton
8b7aca0dcd Include the accel bias into revolution attitude function and also make sure
downsampling is correct.
2011-11-26 14:40:32 -06:00
James Cotton
11ad135b27 Some changes to MPU6000 driver to make it start more reliably on fresh powerup 2011-11-26 14:12:12 -06:00
James Cotton
1574c96c3a Add all the pin remappings and pin sources for F4 timers 2011-11-26 03:36:36 -06:00
James Cotton
c57acf6459 F4 PiOS: Must use a different remap command on F4 for timer module to command
pin.  Include the remap source in the config structure now.
2011-11-26 03:35:26 -06:00
James Cotton
57b381235e Init the timers and PWM in the board file 2011-11-26 02:19:56 -06:00
James Cotton
de9a8453ef Configure the board to use PWM input and servo output 2011-11-26 02:19:56 -06:00
James Cotton
3e01c84a15 Add pin mappings for PWM and receiver port 2011-11-26 02:19:56 -06:00
James Cotton
e71030c6ce Remove testing code for pressure sensor 2011-11-26 02:19:56 -06:00
James Cotton
c118159a6f Remove refence to deleted object 2011-11-26 02:19:55 -06:00
James Cotton
fae611a01f Fix bug where clicking back at last screen of input wizard would go back to
main screen and then in future buttons hung around for no reason
2011-11-25 11:30:12 -06:00
Oleg Semyonov
6d78b97d92 dsm: update DSM protocol binding details in the comments (no code change) 2011-11-19 17:33:04 +02:00
James Cotton
7637e9f669 Get flash chip working and saving to memory. Also get the I2C working with
BMA180 driver.
2011-11-19 00:13:02 -06:00
James Cotton
da75e9fdaf PiOS: Make I2C return an error code for NACK 2011-11-19 00:11:16 -06:00
James Cotton
a7ef5601e0 Update the MPU6000 FIFO code and also fix the temperature code 2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31 Got attitude working again. MPU6000 FIFO reading needs a bit of work. 2011-11-18 00:00:55 -06:00
James Cotton
79730d5afa Try and get the MPU6000 buffer to run down. Staying high for some reason. 2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa Work on bringing the Revolution board up 2011-11-17 10:13:34 -06:00
James Cotton
d97e5dbc59 Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call
MPU6000.  Need to generalize EXTI ASAP.
2011-11-17 10:12:10 -06:00
James Cotton
8477c2229b Using real prototype board now. Move telemetry to GPS port for easy-ness right
now.
2011-11-17 01:58:51 -06:00
James Cotton
1c7c85635d Typo with renamed PI 2011-11-16 19:48:13 -06:00
James Cotton
1deb799b6f Get simple attitude estimation working on F4 INS. Also make MPU6050 return
scaling that casts to degrees.
2011-11-16 11:36:04 -06:00
James Cotton
8e79f86716 Make the CoordinateConversions use a floating point PI 2011-11-16 11:35:52 -06:00
James Cotton
aa698f7b0a Increase the CC IRQ stack to avoid some memory warnings 2011-11-16 09:20:30 -06:00
James Cotton
aeb42332d6 Get the MPU6050 fifo running and read by the attitude module 2011-11-14 11:23:14 -06:00
James Cotton
59507249e1 Hack in attitude to read directly from gyros instead of fifo. All sensors
reading now.
2011-11-14 11:12:10 -06:00
James Cotton
1086df5b21 Correctly configure MPU6050 interrupt. However currently not pushing data to
the buffer as that seems to fail.
2011-11-14 11:11:40 -06:00
James Cotton
2cc2e55248 Add attitude solution for revo 2011-11-14 10:49:37 -06:00
James Cotton
4c04d01be4 Dos2unix pios_config.h for revo 2011-11-14 10:25:57 -06:00
James Cotton
e32cc92002 For now act like revo is using init call system to fix compile errors. 2011-11-14 10:25:28 -06:00
James Cotton
da679441ec Duplicate the spektrum (dsm) driver to F4 branch 2011-11-14 10:12:51 -06:00
James Cotton
684715930a Merge branch 'next' into revolution
Conflicts:
	flight/OpenPilot/Makefile
	flight/Revolution/System/inc/openpilot.h
2011-11-14 10:11:53 -06:00
James Cotton
180d84e373 Update the MPU6050 code a bit more to use the right registers. 2011-11-14 10:09:49 -06:00
James Cotton
2eb89e9b81 No reason for the data read flag in pios_bmp085.c to be a semaphore 2011-11-14 10:07:19 -06:00
James Cotton
76a956416c Switch revo over to MPU6050 2011-11-13 19:45:06 -06:00
James Cotton
96a098bf74 Add code for MPU6050 driver 2011-11-13 19:44:56 -06:00
James Cotton
1e2fe77e3f Start migrating the attitude solution to FreeRTOS 2011-11-13 18:51:35 -06:00
James Cotton
0c103f7b2c Delete F2 PiOS port since unused 2011-11-13 17:33:43 -06:00
James Cotton
fffb6449ac Delete the old INS target 2011-11-13 17:31:34 -06:00
James Cotton
c44235494c Update the Revolution board file a bit 2011-11-13 17:23:56 -06:00
James Cotton
938a577d11 Small change to pios_adc so it works when not enabled 2011-11-13 17:14:08 -06:00
James Cotton
ec84fc4058 Get the Revolution bootloader working 2011-11-13 17:13:42 -06:00
James Cotton
2b37d4bbb5 Enable telemetry on revo 2011-11-13 16:10:19 -06:00
Oleg Semyonov
4a99ec3298 code style: move variable into function and free 1 byte of RAM :-)
component     free heap used
    ----------------------------
    Nothing            2560    -
    PWM                2432  128
    PPM                2408  152
    DSM                2464   96
    S.Bus              2448  112
    GPS (port only)    2368  192
    GPS (port+module)  1312 1248
    CameraStab         2096  464
    Telemetry          1928  632
2011-11-13 18:27:52 +02:00
Oleg Semyonov
de6e450b5f Merge branch 'next' into os/TxPID-module
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	ground/uavobjgenerator/generators/generator_common.h
	shared/uavobjectdefinition/hwsettings.xml

component    	free heap used
----------------------------
Nothing            2544    -
PWM                2416  128
PPM                2392  152
DSM                2448   96
S.Bus              2432  112
GPS (port only)    2352  192
GPS (port+module)  1296 1248
CameraStab         2080  464
Telemetry          1912  632
TxPID              2272  272
2011-11-13 16:25:58 +02:00
James Cotton
b110e9c549 Style suggestions to cleanup GPS from Stac 2011-11-12 21:31:01 -06:00
James Cotton
f0b22519be Merge remote-tracking branch 'origin/corvuscorax/CC_GPS' into next 2011-11-12 21:30:53 -06:00
James Cotton
fdcc6c2d41 Fix a bug I made in programming the bootloaders via jtag 2011-11-12 21:29:46 -06:00
Corvus Corax
198c819943 some more makefile cleanup 2011-11-11 11:54:31 +01:00
Corvus Corax
cd473ed1fd some makefile cleanup 2011-11-11 11:51:45 +01:00
Corvus Corax
aa69027cb2 Merge branch 'next' into CC_GPS 2011-11-11 11:44:11 +01:00
Corvus Corax
61ecc0d310 make optional modules check themselves if they should start or not 2011-11-11 11:39:57 +01:00
Corvus Corax
e03e3c2ed8 removed "special code" to start optional modules 2011-11-11 11:22:54 +01:00
Corvus Corax
5e14e69a08 Revert "OpenPilot: Initialize optional modules based on UAVObject"
This reverts commit 9f03ba178b.
2011-11-11 11:08:49 +01:00
Corvus Corax
9679638244 Revert "Modules/GPS: removed comment line"
This reverts commit 109a58ef30.
2011-11-11 11:07:02 +01:00
Corvus Corax
88f161dd42 Revert "Makefiles: fixed comment line"
This reverts commit 0065842de7.
2011-11-11 11:06:32 +01:00
Oleg Semyonov
8f77d07119 System Module: fix stupid out of memory detection bug 2011-11-07 19:14:55 +02:00
Oleg Semyonov
f5e82b8242 spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios)
No code changes, just file, variable and define names are changed.

First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
2011-11-04 21:40:34 +02:00
Oleg Semyonov
8ed23c76b7 spektrum: fix OpenPilot MB target (deprecated) after spektrum changes 2011-11-04 20:43:49 +02:00
James Cotton
c0f16d2f44 Revolution: Configure clocks correctly 2011-11-03 20:12:34 -05:00
James Cotton
a2015a4f8d Compiled and flashing 2011-11-02 13:20:39 -05:00
James Cotton
0ce80e02f5 Compiles now 2011-11-02 02:51:20 -05:00
Oleg Semyonov
481bff2578 spektrum: code style fixes accoring to OPReview-122 2011-11-01 18:48:07 +02:00
James Cotton
0931a518d4 Bring F4 PiOS up to date with some of our timer conventions 2011-11-01 04:39:51 -05:00
James Cotton
48d2e038bb More work to the revolution build 2011-11-01 04:39:20 -05:00
James Cotton
4d6f810984 Make ADC driver play properly when not included 2011-11-01 03:22:48 -05:00
James Cotton
7eee6bf85b Create revolution board file 2011-11-01 03:22:19 -05:00
James Cotton
7ee4a0412c Work on the build process and include FreeRTOS 2011-11-01 03:20:25 -05:00
James Cotton
9607da9c62 Add some drivers to the device specific library for now until the exti problems
are fixed
2011-11-01 03:19:58 -05:00
James Cotton
2cc0b301ce Make some of the StdPeriph function calls const where appropriate 2011-11-01 03:18:59 -05:00
James Cotton
cdb6059752 Coyp over some of how the PH build system works 2011-11-01 01:36:52 -05:00
James Cotton
9bdd021b2e Make new Revolution target 2011-11-01 01:17:59 -05:00
James Cotton
3388843fb5 Merge in PixHawk F4 work 2011-11-01 01:09:55 -05:00
Oleg Semyonov
a8b36ddd28 HwSettings: disable GPS and telemetry port speed updates at run-time
This is to be consistent across the HwSettings object fields which are
read on boot only by convention.
2011-10-31 23:04:17 +02:00
Oleg Semyonov
0116e6a007 spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.

For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.

Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.

Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.

Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.

The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
James Cotton
f019412209 Various tweaks to get the F4 working 2011-10-26 21:56:00 -05:00
James Cotton
d786c152e3 Merge F4 files from PixHawk branch 2011-10-26 18:23:35 -05:00
James Cotton
0f8ae1e076 Merge branch 'next' into ins
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-10-26 13:18:44 -05:00
Oleg Semyonov
a19bbba858 Merge branch 'next' into os/alternative_spektrum_driver 2011-10-25 11:55:05 +03:00
James Cotton
27bf2b383e Merge remote-tracking branch 'origin/james/remap_outputs' into next 2011-10-23 18:35:25 -05:00
Oleg Semyonov
4ed23dd891 Output Remapping: renamed PPM_SERVO option to PPM+Servo 2011-10-24 00:34:01 +03:00
James Cotton
23150a48fe Merge remote-tracking branch 'origin/os/sbus_dynamic_malloc' into next 2011-10-23 15:26:26 -05:00
James Cotton
24d6ae731b Output Remapping: Added option to just use servo outputs on input lines but not
PPM.  This saves resources.  Good suggestion Os.  In this configuration we
could allow 12 channels of output but for now I'll leave it capped at 10 to
lessen resources on the mixer table.

With spektrum and camera stab enabled there was
1632 bytes heap remaining
180 bytes irq stack remaining
2011-10-23 15:21:40 -05:00
Oleg Semyonov
2a98a52f4c gps: include optional GPS module by default 2011-10-23 00:41:18 +03:00
Oleg Semyonov
6a9208e8c3 Merge branch 'next' into os/TxPID-module 2011-10-22 23:34:58 +03:00
Oleg Semyonov
f71361ca83 Merge branch 'next' into os/GPS-on-CopterControl_next_v2
Conflicts:
	flight/Modules/System/systemmod.c
2011-10-22 23:00:47 +03:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
2011-10-22 00:44:09 +03:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
2011-10-21 23:35:17 +03:00
Corvus Corax
167010e8a0 UAVTalk: Fixed bug in parser failing to handle length of multi-instanceobjects
UAVTalk (on GCS): Fixed a null pointer dereference when receiving in a NACK
2011-10-21 02:04:29 +02:00
Oleg Semyonov
92b81e3f88 sbus: refactor the code using unified PIOS RCVR driver structure
- allow more than one S.Bus receiver (needs hardware support)
- use dynamic memory allocation (frees around 72 bytes of RAM when unused)
2011-10-20 18:23:23 +03:00
James Cotton
e0cc289de0 Remapping inputs to outputs: Drop S2 so there are ten outputs
Output 7 = S3 input
Output 8 = S4 input
Output 9 = S5 input
Output 10 = S6 input

Also fix bug that prevented them outputting signal
2011-10-20 06:28:07 -05:00
Corvus Corax
cb8d9c791c PiOS.posix: fixed missing defines in pios_config. removed platform specific inclde from Systemmod (pios_config.h gets included from pios.h) 2011-10-19 22:28:39 +02:00
Corvus Corax
b00751af91 Systemmod bugfix: UAVObject used without Initialization 2011-10-19 22:28:08 +02:00
Corvus Corax
e244581b18 PiOS.posix: bugfix in pios_udp com driver - data send loop 2011-10-19 13:37:35 +02:00
James Cotton
9312610f3b Output: Enable two more channels to support octo + camera 2011-10-15 16:59:42 -05:00
James Cotton
ce7f424131 CC: When receiver port is set to PPM_SERVO use the spare pins as outputs 2011-10-15 16:59:42 -05:00
James Cotton
19c9528d80 CopterControl: Create structures to supply more output channels 2011-10-15 16:59:42 -05:00
Corvus Corax
425bc5abbe PiOS.posix: PIOS_RCVR : fix posix port of pios_rcvr to allow compilation on 64bit systems 2011-10-11 18:07:04 +02:00
James Cotton
9cbb48417a Merge branch 'long_erase_settings' into next 2011-10-08 14:18:56 -05:00
James Cotton
0f1a6264de Fix jtag programming of bootloader 2011-10-08 14:14:11 -05:00
James Cotton
5dc0f397a6 OP-499 Erase settings bug: Make hte flash chip read a wrong value for 1 second
before wiping settings.
2011-10-07 14:08:56 -05:00
Oleg Semyonov
7800fbe6de gps: initialize GPS UAVO and start GPS module only if port is configured 2011-09-29 00:41:51 +03:00
Oleg Semyonov
469feecb13 pios: remove some unused #defines 2011-09-28 23:40:12 +03:00
Oleg Semyonov
ed8cf89888 Initcall: fix compilation errors for firmware which does not use Initcalls 2011-09-28 22:57:18 +03:00
Oleg Semyonov
a38c569cd0 HwSettings: move Telemetry and add GPS port speed to the HwSettings object
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
2011-09-28 22:02:02 +03:00
James Cotton
fef9570e4d INS: Get bootloader working again 2011-09-27 01:17:14 -05:00
James Cotton
cf6a59468f Merge branch 'next' into ins
Conflicts:
	flight/INS/Makefile
	flight/Project/OpenOCD/stm32f1x.cfg
	flight/Project/OpenOCD/stm32f2x.cfg
	make/firmware-defs.mk
2011-09-27 01:02:06 -05:00
James Cotton
f1e70d2ff5 Merge remote-tracking branch 'origin/msmith/OP-578' into next 2011-09-23 16:43:00 -05:00
Oleg Semyonov
a9137e9db1 TxPID: add update mode option as a workaround for GCS interaction 2011-09-19 16:16:28 +03:00
Oleg Semyonov
aad263bdd8 TxPID: enable ramp-shaped throttle-dependent PIDs
Besides of knob PID tuning it is now possible to use throttle channel
to ramp-shape PID coefficients. This can be used to lower some PIDs on
VTOL while sinking to prevent wobble.

To use the feature select throttle as control input, choose throttle
range max and min values, assign the instance to particular PID
coefficient and define a range for it. When throttle is lower than
defined throttle range min value (or higher than max), then min and max
PID values will be used accordingly. Changing throttle from throttle
min to max will linearly scale PID value.

Note that it is possible to set MinPID > MaxPID. In that case increasing
control input value will decrease the PID coefficient.

Up to 3 independent instances can be configured. The number can be
increased changing the UAVO definition, but at the cost of extra RAM.
2011-09-18 14:38:50 +03:00
Oleg Semyonov
d923117c25 TxPID: optional module to tune PID settings using R/C transmitter
This module will periodically update values of stabilization PID settings
depending on configured input control channels. New values of stabilization
settings are not saved to flash, but updated in RAM. It is expected that the
module will be enabled only for tuning. When desired values are found, they
can be read via GCS and saved permanently. Then this module should be
disabled again.
2011-09-17 22:49:51 +03:00
James Cotton
a1aeab9393 Increase size of framing signal for logging 2011-09-15 10:19:59 -05:00
James Cotton
0d3d5ad094 INS: Get rid of old code that tried to detect when indoor mode wasn't called
for a while
2011-09-14 17:30:02 -05:00
James Cotton
acf2aa218b Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next 2011-09-14 11:49:01 -05:00
James Cotton
06190d1d95 Fix altitude hold dead band range 2011-09-13 10:34:56 -05:00
James Cotton
3b399ad44c Increase gyro bias rate again 2011-09-13 08:30:50 -05:00
Oleg Semyonov
c92870d29e Remove unused file (versionblob.py) 2011-09-13 16:10:10 +03:00
James Cotton
1783817b96 INS: First pass at altitude hold code 2011-09-13 01:44:53 -05:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
c36297227d Stabilization fix typo 2011-09-12 11:56:01 -05:00
James Cotton
63bb80649b Merge branch 'max_rate_for_attitude' into next 2011-09-12 11:51:03 -05:00
James Cotton
00c9d62f6a INS: Miscellaneous changes for debugging handling and also some stuff for GPS
signal loss.
2011-09-12 11:17:17 -05:00
James Cotton
5b836db54c INS/Guidance: Convert distance to using m instead of cm. This is mainly to be
able to use NAN to indicate when values aren't valid from INS.
2011-09-11 23:02:05 -05:00
James Cotton
a682d5deb6 INS: In indoor mode if GPS is found use that to populate PositionActual 2011-09-11 22:53:07 -05:00
James Cotton
8f2fad6918 Fix for merging with the collective channel with the swashplate fix. 2011-09-11 18:53:10 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338 Input Configuration: support all 18 S.Bus input channels 2011-09-12 02:06:50 +03:00
Oleg Semyonov
7b3056d10f Input Configuration: fix S.Bus receiver in multi-receiver code 2011-09-12 02:06:48 +03:00
James Cotton
b38081bb1b Stabilization: When in none mode zero the integral accumulators for rate and
attitude loops.  When not using outer loop zero that accumulator.
2011-09-11 16:33:38 -05:00
Mike Smith
deade53c5d OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices 2011-09-11 10:49:09 -07:00
James Cotton
6945f17eba Make the StabilizationSettings.MaxRate field only apply to the stabilized
modes.  That way ManualRate can exceed MaxRate.
2011-09-11 12:27:17 -05:00
James Cotton
b8bb2dd2ca Merge branch 'next' into ins 2011-09-10 17:02:15 -05:00
James Cotton
aad41ebb4f Merge branch 'mainboard_receiver_fix' into next 2011-09-10 16:01:22 -05:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
setting that is mutually exclusive.
2011-09-10 14:20:51 -05:00
James Cotton
4847a04db8 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 14:20:40 -05:00
James Cotton
eb191d869a Mainboard: Get spektrum working again. 2011-09-10 14:19:54 -05:00
James Cotton
c2a8cc3faa Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
setting that is mutually exclusive.
2011-09-10 14:19:12 -05:00
James Cotton
f725fbe128 CopterControl: Fix build due to changing the AttitudeRaw structure. 2011-09-10 13:56:00 -05:00
James Cotton
2871c75a79 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 13:53:38 -05:00
James Cotton
199db1362d Actuator: Found a bug in actuator that affects how throttle and pitch curves
were used.  Basically 80% was always 100%.  This should make hovering better
and fix heli swash pitch.
2011-09-09 19:40:58 -05:00
James Cotton
1d2a424296 Mainboard: Get spektrum working again. 2011-09-09 09:42:13 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-09-09 08:33:34 -05:00
James Cotton
dfe91af686 UAVObjects: Space allocated in manualcontrolcommand did not match the number of
channels in settings.  Fixed this and added assertion to catch in future.
2011-09-09 01:17:13 -05:00
James Cotton
22821e3c93 HMC5883: Missed a channel for HMC5883 2011-09-08 22:25:35 -05:00
James Cotton
552022250b INS: Disable power up checks until these are made more reliable and remove some
debugging outputs.
2011-09-08 21:44:27 -05:00
James Cotton
e79e8cdbde INS data output: Add the latency the logged messages 2011-09-08 03:39:39 -05:00
James Cotton
c87a042195 IMU3000: For now sample at 1k which allows us to bring down the I2C clock rate
to 400k
2011-09-08 03:37:51 -05:00
James Cotton
0eb4fd113b PiOS BMA180: Increase the comms speed for BMA180 and perfom SPI without
callback.  This takes less time.
2011-09-08 03:28:32 -05:00
James Cotton
d7ea1fc306 PiOS I2C: Swap the expected return value of the F2 pios i2c calls 2011-09-08 01:32:27 -05:00
James Cotton
1a5fd9f30e Heli: Added an explicit collective channel. Also make the default channel
number 0 since that is not invalid.
2011-09-07 01:48:39 -05:00
James Cotton
72625d9971 PiOS RCVR: Make the public API use a 1 based indexing for channel numbers.
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f Merge branch 'safer_failsafe' into next 2011-09-06 16:23:11 -05:00
James Cotton
627c931c79 PiOS I2C: Swap the convention of returned values for I2C 2011-09-06 03:27:20 -05:00
Sambas
a8ef57c6d6 Redo DX8 changes 2011-09-06 08:40:10 +03:00
Stacey Sheldon
1e9bcf8426 openpilot: fix merge of unidirectional gps feature branch 2011-09-04 23:22:29 -04:00
James Cotton
465527a980 INS: Enable GPS parsing. GPS data is processed on INS now. HomeLocation and
WMM are not currenly implemented.
2011-09-04 20:03:04 -05:00
James Cotton
7ff5cd7655 INS: Try and get load down on event system. 2011-09-04 16:21:04 -05:00
James Cotton
cd8ebdf427 INS: Store the gyro bias in the settings so it doesn't get overwritten 2011-09-04 15:21:53 -05:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next
Conflicts:
	flight/OpenPilot/System/pios_board.c
2011-09-04 13:33:52 -05:00
James Cotton
82c5f9f0f4 PIOS_RCVR: Document return values better and use enum for them 2011-09-04 12:37:39 -05:00
James Cotton
533ae9bb41 SBUS: Missed handling the S.Bus failsafe. Now returns PIOS_RVCR_TIMEOUT for
either SBus failsafe mode or when no data for 100 ms.
2011-09-04 12:15:34 -05:00
James Cotton
5e2a36aa03 Merge branch 'stac/allocate-device-instances-from-heap' into next 2011-09-04 12:03:42 -05:00
James Cotton
c326c0941d INS: Work on initialization. Improve the zeroing of the gyros at powerup. 2011-09-04 11:49:15 -05:00
James Cotton
510a1760ca When disconnected set any accessory channels to neutral. Otherwise the
actuator module could keep the pitch at high.  However the "right" thing to do
seems very specific.  For example negative pitch is probably preferable.
2011-09-04 03:45:36 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
51967ae63f OP-571 PIOS_PWM: Add back the PWM supervisor 2011-09-04 01:17:40 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
d3de8ff0ef OP-559: Process the arm status when disconnect and allow it to timeout and
disarm
2011-09-03 23:57:51 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
2011-09-03 23:50:56 -05:00
James Cotton
dae11cf877 INS Logging: Enable temperature reading from gyro and accel (may be removed in
future), push it into UAVO and introduced a logging mode for INS that outputs
all sensor data from aux port.
2011-09-03 15:10:47 -05:00
James Cotton
5eaebac8d8 INS: Get the aux uart working. All F2 GPIO pins need to be remapped to work. Good thing to remember. 2011-09-02 17:04:39 -05:00
James Cotton
63f64003e5 INS: Change how the initialization of algorithms is handled to ensure sensor
dat always good
2011-09-02 13:50:36 -05:00
James Cotton
c40e5800ab BMA180: Enable the EEPROM writing on startup so settings take the first time. 2011-09-02 13:28:36 -05:00
James Cotton
e0ed82eef0 INS Settings: Use the calibration data on the sensors 2011-09-02 13:28:01 -05:00
James Cotton
1d04715476 INS: Rework how the sensor calibration behaves and clean up the interface a
bit.
2011-09-02 13:24:35 -05:00
Mathieu Rondonneau
ae1dd945b1 Fix win32 sim macro problem
This is to get the macro in pios.win32 in sync with sim posix and
real flight.
2011-09-01 21:50:13 -04:00
James Cotton
3b20df22d1 Updates to config gadget for new INS objects
Make scope gadget check if object exists before using it.  Avoids segfaults
when scoped objects disappear.
2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4 This patch breaks backward compatibility with AHRS solidly.
Move the configuration files for INS from AHRS* to INS*.  Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
2011-09-01 12:21:33 -05:00
James Cotton
37878ed4e8 Get the OpenPilot compiling again using a previvous pios_board until doing a
proper merge with next
2011-09-01 03:31:23 -05:00
Stacey Sheldon
eea011c53b openpilot: fix compile error on OP 2011-09-01 03:31:23 -05:00
Stacey Sheldon
43b31efb76 pios: allocate driver instance data from heap
Allocate per-instance data for drivers from the heap
rather than as static variables from the .data segment.

This converts > 800 bytes of RAM from being always consumed
as static data into being allocated from the heap only when
a particular feature is enabled in the hwsettings object.

A minimal config (no receivers, flexi port disabled, main port
disabled) leaves 2448 bytes of free heap.  That's our new baseline.

Approximate RAM (heap) costs of enabling various features:
 + 632 Serial Telemetry (includes 400 bytes of Rx/Tx buffers)
 + 108 PWM Rcvr
 + 152 PPM Rcvr
 + 112 Spektrum Rcvr
 + 24  S.Bus (Should be closer to 68 since driver is still using
              static memory)

There are still some drivers that pre-allocate all of their memory
as static data.  It'll take some work to convert those over to
dynamically allocating their instance data.
2011-08-31 22:35:03 -04:00
Stacey Sheldon
86ce79af1d openpilot: fix compile error on OP 2011-08-31 21:43:57 -04:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
2011-08-27 21:39:56 -04:00
Stacey Sheldon
b3c43da90a stdperiph: Make TIM related APIs use const pointers
This allows the configuration parameters to be stored in
flash instead of copied to RAM.
2011-08-27 21:39:17 -04:00
Stacey Sheldon
a72c657e21 rcvr activity: Speed up activity acquisition
Activity detection logic can now move through
the active receivers more quickly.
2011-08-27 20:17:56 -04:00
James Cotton
6514fd95c7 Also initialize the ReceiverActivity object in manual control 2011-08-27 16:08:57 -05:00
James Cotton
c5746335c6 Initialize GCSReceiver object if it is being used 2011-08-27 15:57:09 -05:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
Stacey Sheldon
f29b99521e openocd: collapse JTAG rules for STM32F1 and STM32F2 2011-08-27 10:43:02 -04:00
Stacey Sheldon
5a51077493 openocd: add support for RTOS autodetection
This allows things like 'info threads' to work in gdb when
combined with openocd 0.5.0+.
2011-08-27 10:38:50 -04:00
Stacey Sheldon
89d23df8cd openocd: Add default config for stm32f2x
Pulled from origin/james/ins.
2011-08-27 10:37:20 -04:00
Stacey Sheldon
3d22258843 Merge remote branch 'origin/james/openocd' into upgrade-to-openocd-0.5.0 2011-08-27 09:19:46 -04:00
James Cotton
1d77d77832 Merge branch 'stac/use-malloc-failed-hook' into next 2011-08-27 00:24:13 -05:00
James Cotton
274333a9bf Merge branch 'next' into stac/use-malloc-failed-hook 2011-08-27 00:12:45 -05:00
James Cotton
55f64802d1 Also enable malloc error catching on OpenPilot 2011-08-27 00:12:16 -05:00
Corvus Corax
0065842de7 Makefiles: fixed comment line 2011-08-25 16:28:34 +02:00
Corvus Corax
658ae3f809 Modules/System: removed comment line 2011-08-25 16:26:46 +02:00
Corvus Corax
109a58ef30 Modules/GPS: removed comment line 2011-08-25 16:25:19 +02:00
Corvus Corax
8173c7b7c6 Refactor GPS_PURISTIC into GPS_MINIMAL 2011-08-25 15:44:49 +02:00
Corvus Corax
3690586f3a Optional Modules: Forced re-generation of mod init.h when makefile has changed 2011-08-25 15:42:11 +02:00
Corvus Corax
1d797bf004 Fixed error introduced by merge 2011-08-25 15:40:45 +02:00
Corvus Corax
c63a10d05e CopterControl: Fix GPS buffer sizes 2011-08-25 15:37:38 +02:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
2011-08-25 15:33:23 +02:00
Corvus Corax
54ecf233f3 Modules/PS: typo fix 2011-08-25 15:13:50 +02:00
Corvus Corax
7e396efbbf Modules/GPS: Assert buffer creation 2011-08-25 15:11:29 +02:00
Corvus Corax
dfdea16065 Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers 2011-08-25 14:46:30 +02:00
Corvus Corax
8b7fea0d19 Merge branch 'OP-567 GPS com layer fix' into next 2011-08-25 13:35:49 +02:00
Corvus Corax
697ac6067e OP-567 Modules/GPS: Block in PIOS_COM, not in TaskDelay - or we will miss updates! 2011-08-25 13:33:41 +02:00
James Cotton
5f7a9b513a Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
2011-08-24 11:37:30 -05:00
James Cotton
1477ea6e94 Make mag updated flag always true when it's updated. Responsibility of INS
algorithm whether to use data.
2011-08-22 03:05:02 -05:00
James Cotton
4e59e697af IMU3000: Sometimes the irq is called before previous I2C transaction. This
isn't good but for now just deal with it.  Need DMA I2C driver.
2011-08-22 02:34:40 -05:00
James Cotton
8c16f614f2 INS: Use the data from the BMP085 and feed into EKF 2011-08-22 02:32:40 -05:00
Stacey Sheldon
edc0caf521 heap: set memory critical alarm on malloc failures
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
2011-08-21 23:14:32 -04:00
Corvus Corax
838149b53f GPS: homelocation init is optional, satellites must be initialized 2011-08-21 18:20:33 +02:00
Corvus Corax
0ce337b42d UAVTalk: fix off by one error preventing the largest UAvObject (gpssatellites) from being sent. 2011-08-21 18:15:10 +02:00
James Cotton
e4e952f270 Manual control settings needs to be initialized in OpenPilot board file for
spektrum to work
2011-08-21 02:21:09 -05:00
James Cotton
04072accd4 Manual control settings needs to be initialized in OpenPilot board file for
spektrum to work
2011-08-21 02:20:10 -05:00
James Cotton
b1c522def3 Merge remote-tracking branch 'origin/next' into ins 2011-08-21 01:34:40 -05:00
James Cotton
38d9df8fcb HMC5883: Clean up the mag driver 2011-08-21 01:29:55 -05:00
James Cotton
f756e9cbc8 INS: Swap the mag axis 2011-08-21 01:29:24 -05:00
James Cotton
a642f3672c Report running time per loop in us 2011-08-21 00:54:31 -05:00
James Cotton
e1afc9a19a Merge branch 'next' into ins
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-08-21 00:47:43 -05:00
James Cotton
c82aa64c53 INS: General clean up to deal with new driver formats. Also automatically
monitors the EKF rate.
2011-08-21 00:42:06 -05:00
James Cotton
af69e0a1a8 BMA180 driver; Don't externalize the fifo buffer but handle it in the driver
layer.  General driver cleanup.
2011-08-21 00:40:10 -05:00
James Cotton
8ae53a4f97 PiOS: Cleanup IMU3000 driver a fair bit. 2011-08-21 00:39:20 -05:00
James Cotton
368323fd59 Merge remote-tracking branch 'origin/james/erase_settings' into next 2011-08-20 13:07:01 -05:00
Corvus Corax
1ad65e0718 Fixed include in sysstemmod. pios_config.h should not be included explicitly. 2011-08-20 15:04:00 +02:00
Corvus Corax
9f03ba178b OpenPilot: Initialize optional modules based on UAVObject 2011-08-20 15:03:31 +02:00
Corvus Corax
4f1f20e801 OpenPilot: Bugfix: For some reason Debugging information didn't work. Symbols are created now 2011-08-20 14:37:53 +02:00
Corvus Corax
d21f6705aa Disabled double definition of pmlib compilation in openPilot/Makefile - target gencode 2011-08-20 13:11:15 +02:00
Corvus Corax
5ea35bb28c Make Diagnostic UAVObjects optional in OP and Sim_Posix (but enabled by default) 2011-08-20 13:06:58 +02:00
Corvus Corax
7395a369a9 Optional Modules: Ported optional module concept to OpenPilot and Sim_Posix 2011-08-20 13:02:44 +02:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00
James Cotton
952b4e1809 Have to speed up the comms rate for gyro to handle the oversampling we are
using.
2011-08-19 14:35:13 -05:00
James Cotton
cefc2b8c2e Clean up main INS function a bit. 2011-08-19 14:34:56 -05:00
Corvus Corax
b75890fcd4 Merge branch 'next' into CC_GPS 2011-08-19 21:34:38 +02:00
James Cotton
d103541970 IMU3000: Make the IRQ trigger the callback based I2C read. Drop the
temperatured data from the FIFO stream.  Add some flags to stop the callbacks
trampling over the configuration.
2011-08-19 14:28:33 -05:00
James Cotton
3465eb2f30 PiOS F2 I2C: Add a callback based transfer. This needs merging into the main
transfer function like SPI but I will leave that for now to avoid creating a
lot of changes in the main code.
2011-08-19 13:38:11 -05:00
Corvus Corax
85aef9c7b4 OpenPilot: bugfix: Add GPS tx buffer by default (needed until GPS has been refactored to not send or only send when configured so) 2011-08-19 20:22:05 +02:00
Corvus Corax
2062ec0aeb AHRS_COM: Initialize transpherred objects before using them 2011-08-19 19:52:27 +02:00
Corvus Corax
5e4941f7cb PiOS.posix: make PiOS.posix bail in case of a Panic with an error message 2011-08-19 18:41:59 +02:00
James Cotton
7444337418 F2 PiOS I2C: Add a poor man semaphore here in case we start calling I2C
transfers from IRQ.  Also catch the double 0x70084 event which was locking up
the FSM with -Os enabled.  I did this in a cheating way (filtering the event
based on state) but it's the cleanest I can see.  Hopefully a DMA version of
I2C will fix this.
2011-08-19 11:39:50 -05:00
Corvus Corax
9bba1f7ae9 Posix: fix object initialization where necessary 2011-08-19 18:36:30 +02:00
James Cotton
b0e04e5f79 PIOS SPI: Make sure the non-freertos busy flag inits to zero 2011-08-19 10:52:50 -05:00
James Cotton
03a8bd7674 Statically initialize object handles to null to make sure the uavobjectmanager
can catch it and return -1.  Do NOT panic when they are null as this is
something that should be caugth at run time in some cases.

Ideally as a compromise in a task start it could have a set of
PIOS_Assert(ObjectNameHandle()) to make sure the minimal set of objects it
needs are there.
2011-08-19 10:12:39 -05:00
James Cotton
ab7e57ad2b Initialize objects for guidance in the correct place. Init some objects in
pios_board_posix since AHRSComms not around.
2011-08-19 09:52:05 -05:00
James Cotton
ced29e221e Revert "Debugging: Add PIOS_DEBUG_Panic() call wen an UAVObject handle is requested but object is uninitialized, make PiOS.posix bail in case of a Panic with an error message"
We do not want to panic in this case as we want the ability to detect if
objects exist at run time

This reverts commit 78e42470d4.
2011-08-19 09:45:10 -05:00
James Cotton
482bec497b Revert "Fixed modules that didn't initialize used UAVObjects correctly"
Modules should initialize their settings and the objects they source.  Not just
everything.

This reverts commit 9ad85e9b7b.
2011-08-19 09:44:38 -05:00
Corvus Corax
69f10cd6d0 PiOS.posix: bugfix in COM_UDP 2011-08-19 13:54:16 +02:00
Corvus Corax
adfb6eccc2 fixed usage of GPS buffer in sim_posix 2011-08-19 13:20:40 +02:00
Corvus Corax
9ad85e9b7b Fixed modules that didn't initialize used UAVObjects correctly 2011-08-19 13:20:15 +02:00
Corvus Corax
78e42470d4 Debugging: Add PIOS_DEBUG_Panic() call wen an UAVObject handle is requested but object is uninitialized, make PiOS.posix bail in case of a Panic with an error message 2011-08-19 12:56:26 +02:00
Corvus Corax
01a844e0da Fixed redefinition of configCHECK_FOR_STACK_OVERFLOW in OpenPilot/System/inc/FreeRTOSConfig.h 2011-08-19 12:11:05 +02:00
Corvus Corax
f86e53bf91 Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next
Conflicts:
	flight/Modules/Telemetry/telemetry.c
2011-08-19 12:10:40 +02:00
James Cotton
f85ae84ec3 Merge branch 'camera_stabilization' into next
Conflicts:
	flight/OpenPilot/System/pios_board_posix.c
2011-08-19 01:48:24 -05:00
James Cotton
c7034ef8a6 IMU3000: Fix a constant that made the sampling rate 1kh instead of 8 internaly.
No downsample that (in IMU3000) by 8 to get gyros at 1khz.  Well about 256 Hz
nyquist and shouldn't cause substantial issues for EKF.
2011-08-18 13:01:51 -05:00
James Cotton
bdb9dc0a54 BMA180: Use DMA for getting the accels and use callback to push it onto the
stack.
2011-08-18 12:51:22 -05:00
James Cotton
3b6ffc8afa PiSO SPI: Implement a poor mans semaphore for non-freertos systems. 2011-08-18 12:51:00 -05:00
James Cotton
294e0cbdff IMU3000: Change IMU3000 api right now so it only reads one element from the
fifo but swaps the endian appropriately.
2011-08-18 11:03:56 -05:00
James Cotton
11ac0707da BMA180: Reset BMA180 chip at reconfiguration. 2011-08-17 06:49:56 -05:00
James Cotton
29026db5d5 Refactor the INS code out a bit but still a mess. 2011-08-17 06:15:14 -05:00
Corvus Corax
6fe495c088 Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk
Conflicts:
	flight/Modules/Telemetry/telemetry.c
2011-08-17 08:30:32 +02:00
James Cotton
c0ead372e1 INS: Change LED flashing to indicate connected. 2011-08-16 11:30:38 -05:00
James Cotton
71a1cdff62 PiOS SPI: For F2 need to have the same receive and transmit length when using
CRC.  This wasn't the case on F1.  With CRC the last byte of the buffer passed
to PIOS_SPI_TransferBlock is NOT USED.  This is the case on both F1 and F2.

Also need to DeInit DMA before enabling or it doesn't enable successfully.

Finally added a timeout which sets a fail on the pios spi transfer in the case
that either of the dma channels fails to enable.
2011-08-16 11:29:15 -05:00
James Cotton
bcca705750 Disable beta hardware bmp085 driver until it's updated. Not necessary anyway
since on the INS.
2011-08-16 08:55:02 -05:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
2011-08-15 10:33:27 -05:00
James Cotton
db9c73db45 Get SPI closer to working. The flags in the pios_config should match the
stream number, not channel number.  Also DeInit DMA section in the init process
which makes debugging and init behavior more reliable.
2011-08-15 04:47:53 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
2011-08-14 15:48:16 +01:00
Corvus Corax
b75653a226 PiOS.posix: small corrections and bugfixes to make pios_com_udp work correctly. Telemetry works now. 2011-08-14 14:21:54 +02:00
Corvus Corax
5b240a2675 PiOS.posix: port pios_udp and pios_com to "next" 2011-08-14 14:21:54 +02:00
Corvus Corax
8a47ade16b flight/Libraries/fifo_buffer: Use platform independent <stdint.h> instead of "stm32xxx.h" to get definition of intX_t types 2011-08-14 14:21:54 +02:00
James Cotton
c5ed82086d Configure the interrupt information before enabling. Still looping in IRQ so
configuration needs work.
2011-08-14 02:00:52 -05:00
James Cotton
02d5e27e93 Got SPI IRQ from mainboard firing 2011-08-14 01:44:44 -05:00
James Cotton
80c2d45d93 Fix the BMP085 interrupt handler and get it producing data. Driver needs some
work to abstract away the actual calculation of altitude from pressure and
temperature.
2011-08-13 20:49:07 -05:00
James Cotton
f766ba47aa Increase the size of the eventdispatcher task and lower the maximum queue size. 2011-08-13 19:21:58 -05:00
James Cotton
a2b76adc33 Attitude: Do not start attitude estimation until accel data appears. This
fixes the NaN when AttitudeSettings not available.
2011-08-13 18:53:42 -05:00
James Cotton
ca413415a0 Code to make openocd 0.5.0 work. I'll keep this branch rebased on next. 2011-08-13 18:03:49 -05:00
James Cotton
62f51fc92d Some improvements to the HMC5883 driver. Still getting funny values but I
suspect the chip at this point.
2011-08-13 11:20:32 -05:00
James Cotton
13e5f4123a Reading gyro registers directly working. 2011-08-13 08:33:46 -05:00
James Cotton
e7990f5d43 Got a hint of some data with this code :) 2011-08-13 07:13:43 -05:00
James Cotton
f82e5dde33 Fix the EXTI IRQ handlers 2011-08-13 07:13:21 -05:00
James Cotton
e1f7a5003d Fix up SPI DMA streams 2011-08-13 04:54:19 -05:00
James Cotton
8929e2f359 Update some of the DMA settings 2011-08-13 02:46:13 -05:00
James Cotton
77cca9ba30 Move EXTI handlers into other drivers 2011-08-13 01:29:17 -05:00
James Cotton
6d018c046e Get BMA180 working. Need to move exti stuff into it until pios_exti
implemented properly
2011-08-13 01:10:33 -05:00
James Cotton
5619e33292 Bootloader now jumps to functioning code for INS. Consistent with AHRS code. 2011-08-12 22:52:47 -05:00
James Cotton
6529b8360f Trying to get linker system working for INS 2011-08-12 21:28:02 -05:00
James Cotton
e993fae463 Fix bootloader 2011-08-12 04:32:02 -05:00
James Cotton
e57f774bb8 F2 INS compiles now 2011-08-12 04:30:14 -05:00
James Cotton
1d1f351233 Pios Delay: Add function for measuring time difference between two cycle counts 2011-08-12 04:29:53 -05:00
James Cotton
b3b4fcd007 Fix linker script and get rid of dead code 2011-08-12 03:44:55 -05:00
James Cotton
f247112090 PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929 Make BMP085 driver device dependent and update to new driver style. 2011-08-12 03:38:45 -05:00
James Cotton
9d76efa2aa Move BMA180 driver to common architecture style. 2011-08-12 03:38:45 -05:00
James Cotton
1dc08e5cf7 F2 PiOS: Small fix to hmc5883 driver 2011-08-12 03:38:44 -05:00
James Cotton
ba413d5dad F2 StdPeriph: Make the StdPeriph take in config parameters as const.
Unfortunately they don't do this upstream :(
2011-08-12 03:38:40 -05:00
James Cotton
ef0cdae622 PiOS F2: Remove clock initialization from usart since it is in pios_sys.c 2011-08-12 02:28:02 -05:00
James Cotton
6310f46705 HMC5883: Update driver for F2. Move to STM32F2xx directory since it is device
dependent.  Abstract configuration out of board.h file into a standard board.c
structure.
2011-08-12 02:26:51 -05:00
James Cotton
784c7b2646 Merge branch 'next' into ins 2011-08-11 21:52:10 -05:00
James Cotton
ec4e23aff9 Camera Stabilization: Bound outputs to [-1,1] although this should be redundant
with checks in actuator.
2011-08-11 14:34:38 -05:00
James Cotton
9c7799dfe6 UAVObject Init: Get rid of deprecated linker init code 2011-08-10 22:48:42 -05:00
James Cotton
c8313d7b3e Add the camera stabilization files to the Pro build. Not functional though. 2011-08-10 22:31:38 -05:00
James Cotton
bbe3c1533a Merge branch 'next' into camera_stabilization 2011-08-10 21:57:45 -05:00
James Cotton
ab288e95ab Stabilization: Small patch so that by default the integral is zeroed while
throttle is low (good for quads) but can be disabled (good for planes and also
testing helis).
2011-08-10 03:51:46 -05:00
James Cotton
f23eaa8273 Make the Actuator pull from the CameraDesired fields 2011-08-09 21:47:42 -05:00
James Cotton
f11aa80444 CameraStabilization: Make the CameraStabilization module put the desired
position into another object (will help with configuration).
2011-08-09 20:45:38 -05:00
James Cotton
c4e272b9ad Merge branch 'next' into camera_stabilization 2011-08-09 20:16:45 -05:00
James Cotton
0c2c48bee6 F2 PiOS: More changes for spi to work (not completed) 2011-08-09 12:59:10 -05:00
James Cotton
a097ff784b F2 PiOS: Getting the I2C driver working again (copying changes from Zippe,
thanks again man!)
2011-08-09 12:58:46 -05:00
James Cotton
8be9ac9cc9 PiOS: Move driver out of common directory since it makes calls to configure the
EXTI system.
2011-08-09 12:51:26 -05:00
James Cotton
d78450eae8 Move some of the F2 defines into the makefile to make them global. Fixes some
issues with grabbing the wrong stm32 configuration file.
2011-08-09 01:19:05 -05:00
James Cotton
27213c7fd9 F2 PiOS USART: Update to the new driver format for coms 2011-08-09 01:18:25 -05:00
James Cotton
ec2121bca8 Attitude: Keep first element of quaternion positive 2011-08-08 21:16:04 -05:00
James Cotton
d23e13716b dos2unix: fifo_buffer 2011-08-08 08:37:14 -05:00
James Cotton
479ba7c21f OP-378 INS: Continue getting F2 INS to compile 2011-08-08 08:36:40 -05:00
sambas
9f35b6939c Bind IO fix 2011-08-07 10:10:52 +03:00
James Cotton
558bdddeaf INS: Almost got Bootloader compiling *sigh* 2011-08-06 21:27:29 -05:00
James Cotton
a0d77faf4b PiOS: Move pios_iap out of common. It is STM32F1x specific. Created an
STM32F2xx stub version.  This needs cleaning up - there is some common code,
most of which can probably move to the bl_helper function.
2011-08-06 20:24:07 -05:00
James Cotton
f23ec059fe dos2unix 2011-08-06 19:53:46 -05:00
James Cotton
1ccb9a1947 Some changes to BL to get running on F2. Also disables it for now (flash
interface is different).
2011-08-06 19:46:41 -05:00
James Cotton
d1c9ac0705 PiOS F2: Commit the F2 port of PiOS from Zippe. Thanks for doing all the hard
work man :-D
2011-08-06 19:36:56 -05:00
James Cotton
7720f9ff09 Add F2 support for the new OpenOCD for newer targets. Requires compiling
OpenOCD from repo.
2011-08-06 18:21:21 -05:00
James Cotton
0bba13a0e9 Merge branch 'next' into ins
Conflicts:
	flight/INS/Makefile
	flight/INS/pios_board.c
	flight/Modules/Altitude/altitude.c
	flight/PiOS/Boards/STM3210E_INS.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_BL_sections.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_BL.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_NB.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_memory.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-08-06 17:25:56 -05:00
sambas
1e67b5e3b5 DSMx_binder, hw setting 0 disabled, 1-10 bind pulses. Manual disable after successful bind. Only for flexiport. 2011-08-06 22:16:47 +03:00
James Cotton
fd86c25b49 Make sure OP compiles with new object init structure. 2011-08-04 15:01:54 -05:00
sambas
a454cf844b DX8 support, BIND3 only 2011-08-04 19:20:05 +03:00
James Cotton
a592e7d398 ManualControlSettings must be also initialized in pios_board.c 2011-08-04 07:47:50 -05:00
James Cotton
bac7836318 Revert "uavobj: shrink metadata struct to save RAM". I was premature merging
this to next as it changes the on-the-wire representation and thus doesn't
allow GCS to set the metadata.

This reverts commit a641cd7956.
2011-08-04 07:17:36 -05:00
Stacey Sheldon
a641cd7956 uavobj: shrink metadata struct to save RAM
This update saves 448 bytes of RAM with the current
crop of UAVObjects.  It reduces a 19 byte struct to
8 bytes.

Note: This also introduces a limit of 65.534s for the
update periods.
2011-08-03 00:00:50 -04:00
Stacey Sheldon
90b2625deb rcvractivity: Add tracking of Rx channel activity 2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61 rcvr: support multiple simultaneous receivers
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
2011-08-02 01:22:04 -04:00
Stacey Sheldon
829b8b83f6 rcvr: Add GCS receiver driver for rcvr via telemetry
This allows the GCS to emulate a receiver device via the
telemetry link.

Select "GCS" as your input type in the manualcontrol config
screen and calibrate it as normal.

Note: The expected values for the channels are in microseconds
      just like a PWM or PPM input device.  The channel values
      are validated against minimum/maximum pulse lengths just
      like normal receivers.
2011-08-02 01:22:04 -04:00
Stacey Sheldon
2f79e4fa76 Merge remote branch 'origin/stac/refactor-usart-com' into next 2011-07-31 09:41:06 -04:00
James Cotton
035b4103c4 Need to initialize the HwSettings before using them. 2011-07-31 09:42:15 +09:00
James Cotton
c5bf0ac657 Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-31 09:13:37 +09:00
James Cotton
568ea13471 Merge branch 'next' into stac/refactor-usart-com 2011-07-31 09:13:27 +09:00
Stacey Sheldon
6b1ec9a54e bl: fix LED pwm computation with new stopwatch 2011-07-30 16:59:57 -04:00
James Cotton
3df730c64f Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 13:38:43 +09:00
James Cotton
387a22398e Make it possible to optionally enable the CameraStab module 2011-07-30 12:08:47 +09:00
Stacey Sheldon
8c0b60099f rcvr: don't init spektrum and sbus rcvrs twice 2011-07-29 22:59:50 -04:00
James Cotton
cb9c6dfb5e Change the sequencing of telemetry starting to make sure all the objects that
were registered in an initialize and then enumerated by telemetry
2011-07-30 11:31:45 +09:00
James Cotton
132e19d613 Change the makefiles - always compile the optional objects but the flag
indicates whether they are registered
2011-07-30 11:29:29 +09:00
James Cotton
ae67c51632 Register some missing objects with their modules 2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 10:55:16 +09:00
James Cotton
b2d2114ede Disable auto registration of all objects. Later the uavobj_init linker scripts
should be deleted to not carry around old code.
2011-07-30 10:24:46 +09:00
James Cotton
23e9b56839 Dos2unix flight/CopterControl/System/coptercontrol.c 2011-07-30 10:06:35 +09:00
James Cotton
96c2d24253 Merge branch 'next' into camera_stabilization
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	flight/Modules/Actuator/actuator.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
	flight/Modules/System/systemmod.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
James Cotton
333ab645ec Dos2unix manualcontrol.c to facilitate merging 2011-07-30 09:55:02 +09:00
Stacey Sheldon
c2fb0d8b43 com: allow run-time allocation of buffers 2011-07-29 15:33:14 -04:00
Stacey Sheldon
8b0415d905 bl: alternate stopwatch for small bootloaders
The small bootloaders (CC and PipX) are out of flash space
so their stopwatch implementation has been swapped out for
one based on the DELAY clock that takes about 500 bytes less
of code space.

Identical functionality is preserved.
2011-07-29 15:33:01 -04:00
Stacey Sheldon
13f9b0e09d Merge remote branch 'origin/OP-498_jwhitlock_add-ppm-to-cc' into next 2011-07-28 22:15:01 -04:00
Stacey Sheldon
a3888ecd48 usart: ensure callbacks are bound in the correct order 2011-07-27 23:21:39 -04:00
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00