abeck70
c3c80d4aa8
OP-1848 altvario fix build issue for CC
2015-05-04 08:58:07 +10:00
abeck70
a9ad3c5ec1
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-04 08:42:54 +10:00
abeck70
d4561e9cd8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch
2015-05-04 08:41:12 +10:00
abeck70
ca03092fb4
OP-1863 ratetrainer update stab handler to support new outerloop directwithlimits mode
2015-05-04 08:40:06 +10:00
Alessio Morale
9dcd6990d3
OP-1874 - Add notification for Critical alarms, add Attitude, modify alarm repetition rates.
...
reduce rate for Magnetometer, Receiver. Include Attitude.
2015-05-03 23:13:53 +02:00
Laurent Lalanne
842330922f
Merge branch 'amorale/OP-1857_ppm_on_flexi_cc' into rel-15.02.02
2015-05-03 13:22:47 +02:00
Alessio Morale
c227686854
uncrustify
2015-05-02 20:27:28 +02:00
RS2K
2fca0b1d9b
OP-1835 - Motor Constraints for 15.02.02 - Quick fix to disable clipping. Bit of code not in the original fix I had to deal with.
2015-05-02 13:11:40 -05:00
RS2K
57d062ff67
OP-1835 - Motor Constraints for 15.02.02
...
OP-1835 - Motor Constraints for 15.02.02
2015-05-02 12:55:43 -05:00
Philippe Renon
9a312ef115
uncrustified
2015-05-02 16:46:35 +02:00
Philippe Renon
b4b93bee93
Merge remote-tracking branch 'origin/rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum' into next
2015-05-02 16:34:15 +02:00
abeck70
b479bd5436
OP-1848 altvario TxPID support
2015-05-02 23:57:18 +10:00
abeck70
21c54c3a37
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-01 22:59:36 +10:00
abeck70
b4d727db98
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch
2015-05-01 21:53:35 +10:00
Laurent Lalanne
11e83bd0e8
OP-1869 Analog Airspeed sensor : Allow scale (voltage divider), change alpha/LowPassFilter behavior
2015-05-01 13:00:36 +02:00
m_thread
c4c60c897b
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2015-05-01 09:53:35 +02:00
m_thread
b8653d44da
Merge branch 'thread/OP-1837_SRXL_Cleanup' into next
2015-05-01 09:46:32 +02:00
Cliff Geerdes
dad8f40c4d
OP-1840 Remove reference to unreleased hardware
2015-05-01 02:49:15 -04:00
Cliff Geerdes
c365bd3032
OP-1840 Removed unused debug .h and update comments
2015-05-01 02:46:38 -04:00
abeck70
87f521bde3
OP-1867 autoland
...
build fix
2015-04-30 23:11:32 +10:00
abeck70
0eb84cd8f6
OP-1867 pathplanner autoland
...
Setup land with descent rate set from flight mode settings.
2015-04-30 22:54:38 +10:00
abeck70
17b8ccd6bb
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff
2015-04-30 17:34:33 +10:00
Cliff Geerdes
f331ca0daf
OP-1840 CC3D wouldn't build and update some comments
2015-04-30 01:27:19 -04:00
Cliff Geerdes
48bea16ab9
OP-1840 GPS serial improvements initial coding
2015-04-29 23:46:47 -04:00
Alessio Morale
82c0cba664
Merge remote-tracking branch 'origin/amorale/OP-1841_serial_telemetry_issue' into next
2015-04-29 19:45:11 +02:00
abeck70
d6de7803e1
OP-1858 autotakeoff pathplanner fixes
2015-04-29 20:27:30 +10:00
abeck70
09e2c6f00e
OP-1863 RateTrainer
...
Initial commit for code review
2015-04-28 21:54:58 +10:00
abeck70
b14a966088
OP-1858 autotakeoff and pathplanner
...
1. Allow arming in pathplanner
2. Typo in comment
2015-04-28 20:54:44 +10:00
abeck70
210b15db4d
OP-1858 autotakeoff in pathplanner
...
1. Allowing arming in pathplanner
2. Takeoff activation requires throttle to be above 30%
3. Takeoff occurs at the current/actual position and rises vertical to the settings altititude.
4. The details of the takeoff waypoint are effectively ignored - this is a simplicifcation to avoid having to have pathplanner inject a flyvector command from the current location to the waypoint
5. We hard code the condition check for autotakeoff as only one mode is supported.
2015-04-27 23:01:47 +10:00
samguns
09a00f8990
Merge branch 'rel-15.02.02' into samguns/zh_CN_GCS
2015-04-27 11:56:25 +08:00
m_thread
1f7a8d7ef1
OP-1837 Fixed a wrongly named config.
2015-04-27 01:05:47 +02:00
Richard von Lehe
d22b96d24b
OP-1740: Force latest Pathfollower changes to use uavobj enums.
2015-04-26 17:46:49 -05:00
Richard von Lehe
f3611591e0
Merge branch 'next' into rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum
...
Conflicts:
flight/modules/PathFollower/inc/vtollandcontroller.h
flight/modules/PathFollower/vtollandcontroller.cpp
flight/modules/PathFollower/vtollandfsm.cpp
2015-04-26 17:45:36 -05:00
Steve Evans
5c5c8b5947
OP-1849 Uncrustify
2015-04-26 21:45:43 +01:00
m_thread
8d4fe80388
OP-1837 Uncrustify
2015-04-26 21:08:54 +02:00
Steve Evans
e89356deb2
OP-1849 Invert DTR and initialise
2015-04-26 14:18:40 +01:00
m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
m_thread
f11285ea16
Added new helper macros to performance counters.
2015-04-26 14:33:25 +02:00
Steve Evans
25b0b3df0f
OP-1849 For Revo put DTR on pin 9 of FlexIO port
2015-04-26 11:26:04 +01:00
Steve Evans
7445add280
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
2015-04-26 03:05:47 +01:00
Alessio Morale
6d9bb8a287
OP-1857 - Enable PPM On Flexi Port
2015-04-25 20:21:56 +02:00
Steve Evans
0aede91547
Merge branch 'next' into steve/OP-1849_update_minimosd_via_usb
2015-04-24 22:49:02 +01:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
abeck70
e36ab50040
OP-1838 altvario
...
Fixes and tidyup.
TODO:
1. Fix UI for sliders
2. Disable vtol tuning on stabi input
3. Altitude loss feedback
2015-04-23 22:49:12 +10:00
abeck70
443b3742cc
OP-1848 altvario
...
1. Build fixes
2. Additional UI components.
2015-04-23 21:54:20 +10:00
abeck70
0d77cd95d9
OP-1848 altvari0
...
1. build fixes
2. Updated ui to use updated uavo names in altitude settings that align to the naming in vtol settings
3. Moved call the thrust altvario to pre application of PIDs for 3d axes to allow for later coupling.
2015-04-23 21:13:00 +10:00
abeck70
d469a754bf
OP-1848 ready for review
...
AltVario:
1. Uses new PID scheme
2. Runs at the outer loop rate to save CPU cycles
2015-04-23 15:51:09 +10:00
abeck70
955f314541
OP-1848 altvario rewrite - initial checkin
...
TODO: 1) update uavos 2) check dT
2015-04-23 15:46:47 +10:00
James Duley
00818f3161
OP-1851 Missing static keyword:
...
Added static to header functions that were missing it
2015-04-22 11:27:47 +12:00
Steve Evans
79339d677f
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb
2015-04-21 07:44:50 +01:00
Steve Evans
d28831008f
OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined
2015-04-20 21:40:42 +01:00
Alessio Morale
ab36dcbdee
Merge remote-tracking branch 'origin/rel-15.02.02' into next
2015-04-20 14:54:07 +02:00
Alessio Morale
1162c0afb2
Merge remote-tracking branch 'origin/master' into next
2015-04-20 14:53:13 +02:00
Alessio Morale
6176f7a1d7
Uncrustify
2015-04-20 14:52:13 +02:00
Alessio Morale
2571db4d96
Merge remote-tracking branch 'origin/laurent/OP-1814_Battery_reset_mAh' into next
2015-04-20 14:29:16 +02:00
Alessio Morale
19bb4d8016
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2015-04-20 12:10:31 +02:00
Alessio Morale
118a0ec66f
Merge remote-tracking branch 'origin/amorale/OP-1802_throttle_fake_pos_vel' into next
2015-04-20 12:10:08 +02:00
abeck70
f68e1144ca
OP-1760 fix compile issue for CC
2015-04-20 20:09:27 +10:00
Alessio Morale
061ef1e377
Merge remote-tracking branch 'origin/amorale/OP-1828_optional_analog_inputs' into next
2015-04-20 12:08:34 +02:00
Alessio Morale
9103b4de92
Merge remote-tracking branch 'origin/rodney/OP-1834_disable_piro_comp_in_self_level_modes' into next
2015-04-20 11:58:51 +02:00
Alessio Morale
107f807c92
Merge remote-tracking branch 'origin/rodney/OP-1794_dump_axis_lock_accumulators_on_low_throttle' into next
2015-04-20 11:52:35 +02:00
Alessio Morale
e12a595826
OP-1802 - (missing) change from review
2015-04-20 11:38:38 +02:00
Alessio Morale
6c22ed3b69
OP-1802 - Changes from review
2015-04-20 11:35:40 +02:00
Alessio Morale
3128127392
OP-1841 - Check available size at each step to avoid overrun
2015-04-20 05:48:39 +02:00
abeck70
d943f5a0ce
OP-1760 autotakeoff
...
On landing stausvtolland state of DISARMED, armhandler now detects this and disarms by force equivalent to a pathplanner alarm trigger.
To re-arm, one must leave the land flight mode.
2015-04-20 08:43:57 +10:00
Steve Evans
b87a1c1fa6
OP-1803 Enable DSM link quality so testers have something to work with
2015-04-19 18:41:04 +01:00
abeck70
3a0c36f7d7
OP-1760 autotakeoff
...
Add sanity checks to protect from waypoint looping inpath planner.
If takeoff initiated and thrust > vtol_min, enter position hold, reflect copletion in pathstatus, and pathplanner will move to next waypoint in a very short period of time.
2015-04-19 18:46:40 +10:00
abeck70
b96379cf78
OP-1760 landing fixes : avoid false positives on ground detection from accel vibration
...
Viper found that a badly mounted FC can trigger ground detection.
2015-04-19 18:18:14 +10:00
abeck70
1e9bd43871
Merge branch 'next' into abeck/OP-1760-autotakeoff-squashed
2015-04-19 17:52:35 +10:00
Alessio Morale
5c76c0ee07
Merge remote-tracking branch 'origin/steve/OP-1289_two_telemetry_streams' into next
...
Conflicts:
flight/modules/Telemetry/telemetry.c
2015-04-18 19:10:13 +02:00
abeck70
c4aa17a04c
OP-1760 autotakeoff pathplanner now uses pathstatus in conditionLegRemaining
2015-04-17 23:06:02 +10:00
abeck70
eebbfcea64
OP-1760 autotakeoff - enable positional control pathplanner landing to fly to final waypoint during landing
2015-04-17 22:58:53 +10:00
abeck70
88b0c99087
OP-1760 autotakeoff in pathplaner: control to start location instead of end location in NE
2015-04-17 22:44:05 +10:00
abeck70
55cbc2cd9b
OP-1760 autotakeoff - simplify pathplanner data input requirements to trigger autotakeoff
2015-04-17 22:21:08 +10:00
abeck70
db0dc0e552
OP-1760 indicate completion of takeoff when disarmed
...
This can be detected in pathplanner.
2015-04-17 21:26:24 +10:00
Mathieu Rondonneau
9cb0926009
OP-1804: Add realloc.
2015-04-16 22:52:09 -07:00
abeck70
04c42bd316
OP-1760 autotakeoff
...
1. Make autotakeoff height configurable
2. Fix the pidcontroldown transfer to solve the rough transition between pid controllers for landing, takeoff, braking etc.
2015-04-16 21:22:37 +10:00
abeck70
a8c6a19784
OP-1760 code review fixes
2015-04-15 08:39:13 +10:00
Rodney Grainger
aa9ed6a62a
OP-1843 - uncrustify
2015-04-14 22:00:11 +12:00
Rodney Grainger
115b206032
OP-1834 - Disable pirouette compensation in self level modes
2015-04-14 21:55:57 +12:00
Richard von Lehe
1ac4c63fa7
OP-1740: UAVObjects use enums
2015-04-12 22:05:05 -05:00
Rich von Lehe
782944bfb1
OP-1740: uavobj use enums: clean up errors
2015-04-12 16:20:09 -05:00
abeck70
a52969a76b
OP-1760 Autotakeoff
...
Squashed commit as code reviews impossible otherwise due to dependencing on OP-1696
2015-04-12 21:39:31 +10:00
Rich von Lehe
e6de41855b
OP-1740: GetSet use enums: Getting more files to conform to using enums instead of uint8_t...
2015-04-11 15:43:04 -05:00
Steve Evans
d2a69b2d44
OP-1803 Merge OP-1289 Only create local telemetry queues/tasks if needed
2015-04-11 13:32:45 +01:00
Steve Evans
32a25e7044
OP-1289 Only create local telemetry queues/tasks if needed
2015-04-11 12:58:14 +01:00
Richard von Lehe
b3a7a89dca
OP-1740: GetSet functions take enum: Fix remaining compile errors in PathFollower and Airspeed modules.
2015-04-09 20:04:44 -05:00
Alessio Morale
4afd644018
OP-1828 - Revolution: Maps Servo 3-6 to ADC2-5
2015-04-10 01:16:59 +02:00
Richard von Lehe
4c5cebf5c6
OP-1740 UAV0 GetSet Functions Take Enum: getting codebase to compile - multiple changes needed, still incomplete (i.e. this commit will not compile, but I want to save my changes on more than just my machine :-)
2015-04-08 21:40:15 -05:00
Alessio Morale
6641bb0e21
OP-1828 - Add boards support
2015-04-09 00:26:04 +02:00
Alessio Morale
3a772e1828
OP-1828 - Add support for optional analog inputs
...
Optional analog inputs are not initialized at ADC module startup.
Calling PIOS_ADC_PinSetup(uint32_t pin) setups them as analog input at a later stage.
2015-04-09 00:25:53 +02:00
Alessio Morale
c452ecf180
OP-1820 - fix some now unneded mess in PiOS_Sensor
2015-04-05 16:10:10 +02:00
Rodney Grainger
e81e9c03cb
OP-1794 - Uncrustify
2015-04-05 17:27:43 +12:00
Rodney Grainger
34401d645b
OP-1794 Dump Axis Lock accumulators when throttle is low.
...
For multi-rotors, the system should prevent the wind up of the AxisLock accumulators when the throttle is low.
With the current firmware, a multi-rotor using Axis Lock will flip upon takeoff if the vehicle is moved, or left for a long period, prior to arming.
2015-04-05 16:41:58 +12:00
Steve Evans
73aeb5d653
OP-1803 Report link quality for OPLink
2015-04-04 22:02:54 +01:00
Laurent Lalanne
2350acb068
OP-1814 Add ResetConsumedEnergy option to flight side
2015-04-04 22:34:22 +02:00
Steve Evans
b93d9e178e
OP-1803 Max signal quality is 100%
2015-04-04 14:50:08 +01:00
Alessio Morale
ee19ff893e
OP-1820 - Add mag orientation parameter in hmc configuration
2015-04-03 20:40:52 +02:00
Steve Evans
b7122008c7
OP-1803 Uncrustify
2015-04-03 18:30:36 +01:00
Steve Evans
b5a3ad3708
OP-1803 Use float to avoid rounding error on signal quality
2015-04-03 18:01:04 +01:00
Steve Evans
32b3f0d55d
OP-1803 Remove old header reference
2015-04-03 15:45:00 +01:00
Werner Backes
e42c6e4265
Fixed PathPlanner's 3D mode for the case of non-custom crafts.
2015-04-03 16:32:33 +02:00
Steve Evans
f9f0e1657c
OP-1803 Add good frame count option for debug
2015-04-03 15:29:24 +01:00
Steve Evans
2843715432
Merge branch 'steve/OP-1289_two_telemetry_streams' into steve/OP-1803_s.bus_dropped_frames
...
Update with taskinfo update
2015-04-03 12:46:12 +01:00
Steve Evans
91e03a1541
OP-1289 Adding tracking of new RadioTx task
2015-04-03 12:37:37 +01:00
Steve Evans
8276aa3a66
OP-1803 Monitor signal quality when armed too
2015-04-03 09:47:07 +01:00
Steve Evans
2e5ecd2dce
OP-1803 S.Bus signal quality monitoring
2015-04-02 21:41:40 +01:00
Steve Evans
a0f180d393
OP-1803 Initial commit
2015-04-02 19:09:58 +01:00
Alessio Morale
be4bc23da4
OP-1812 - Fix the failsafe issue with PWM inputs
2015-04-01 20:36:10 +02:00
Werner Backes
93630b30df
Fixed calls to path_circle.
2015-03-28 13:42:31 +01:00
m_thread
4bd2e889ce
Merge remote-tracking branch 'origin/samguns/OP-1781_ground_input_channel_conf' into next
2015-03-28 12:33:24 +01:00
samguns
2d9f3acc17
OP-1781 Fix the problem that while calibrating transmitter, the graphic stick doesn't move accordingly.
2015-03-23 23:05:07 +08:00
Alessio Morale
006fdf9072
Uncrustify
2015-03-22 20:26:36 +01:00
Alessio Morale
fbaf39229b
Merge remote-tracking branch 'origin/cyr/OP-1739_GNSS' into next
2015-03-22 20:25:51 +01:00
Alessio Morale
4962936c76
Merge remote-tracking branch 'origin/cyr/OP-1691_RFM22B_reset_cpuhog' into next
2015-03-22 20:24:37 +01:00
Alessio Morale
1da57315d3
OP-1802 - Throttle fake pos/vel in filterstationary
2015-03-22 13:24:42 +01:00
Alessio Morale
2a45f58fea
Merge remote-tracking branch 'origin/amorale/OP-1793_sensor_fixes' into next
2015-03-20 22:43:33 +01:00
Alessio Morale
59325f6292
Merge remote-tracking branch 'origin/amorale/OP-1750_perf_optimization' into next
2015-03-20 22:43:11 +01:00
Alessio Morale
ddd72324c3
OP-1793 - Use a constant for running average smoothing factor
2015-03-20 22:11:29 +01:00
Alessio Morale
0d1b3ffb3d
OP-1750 - don't reuse invBmag, calculate mag magnitude only if mag samples are provided
2015-03-20 21:45:50 +01:00
abeck70
a4ea1f008b
OP-1696 uncrustify
2015-03-20 21:44:24 +11:00
abeck70
88494e2745
OP-1696 PathFollower rewrite in C++ and Landing Squashed commit of the following:
...
commit 580cd8addafadc3109b90b1fd183130ea8add7f2
Author: abeck70 <abeck70@icloud.com>
Date: Fri Mar 20 21:32:33 2015 +1100
OP-1696 Cleanup and bug fix
1. Code review cleanup
2. Fixed gps assist braking - the thrust limits in piddown were not being set.
commit 31ac4494f6e2bc5859f49d1f76f19fe3a4d32862
Author: abeck70 <abeck70@icloud.com>
Date: Wed Mar 18 08:31:16 2015 +1100
OP-1696 fix initialisation of down pid control parameters
commit a7bd737459249530bde9546b8247dd45b40dced4
Author: abeck70 <abeck70@icloud.com>
Date: Tue Mar 17 21:18:38 2015 +1100
OP-1769 Actuator fix from code review
commit 968172b8fb46c91b2611be4825e17faf2fa13411
Author: abeck70 <abeck70@icloud.com>
Date: Tue Mar 17 21:01:11 2015 +1100
OP-1696 fixed ground pathfollower settings xml
commit 721c07b67a87911ed67d0b62aa658cfac6d3eb97
Merge: f556215 be9f4ae5c9b6faad44b315a9cfa6ba5f3958c31f96843325d04f4cd91102243deafed693fb2d53e15cac57e0a8b31c1385db7d605
2015-03-20 21:42:20 +11:00
Alessio Morale
bcffde5465
OP-1793 - Filter temperature to reduce the noise injected into pressure measuremenent.
2015-03-18 05:29:39 +01:00
Alessio Morale
8eaf7f9918
OP-1793 - Fix enabling condition for baro temp correction
2015-03-18 04:44:02 +01:00
Alessio Morale
a6b43ecef0
OP-1793 - Apply accel bias before scaling
2015-03-18 04:43:30 +01:00
Steve Evans
ba217a3d7d
OP-1289 Revise naming of mainQueue to queue
...
As per review comments
+review OPReview-985
2015-03-17 20:52:08 +00:00
Steve Evans
45005a167f
OP-1289 Revise naming of the two channels of data and associated functions
...
The code now uses a "local" prefix to refer to the telemetry channel
associated with a port on the FC and a "radio" prefix to refer to the
telemetry channel associated with the OPLink/USB.
+review OPReview-985
2015-03-15 23:11:42 +00:00
Steve Evans
12d3bdbe8a
OP-1289 add per channel port selection routines
...
+review OPReview-985
2015-03-15 18:19:19 +00:00
Alessio Morale
4e9d092b03
OP-1776 - Disable radioRx task if radio is not enabled, fix for comments
2015-03-15 16:26:56 +01:00
Alessio Morale
7c9f6c0ed5
OP-1776 - Missing change from review
2015-03-15 14:36:23 +01:00
Steve Evans
5952cfa275
Year is 2015
2015-03-15 00:48:36 +00:00
Steve Evans
6bb732fb02
OP-1289 Need Revo to send two telemetry streams for OSD and GCS
2015-03-14 23:58:18 +00:00
Alessio Morale
bb0e03e387
OP-1776 - Further cleanup/optimization for ProcessTelemetryStream* functions
2015-03-14 14:39:02 +01:00
Alessio Morale
a418ca349f
OP-1776 - Fixes from review
2015-03-14 13:46:08 +01:00
abeck70
5c9b6fac29
OP-1769 uncrustify
2015-03-14 12:15:59 +11:00
abeck70
5e7a3c30e1
OP-1769 ground actuator
...
code review comment addressed to reduce code size
2015-03-14 12:01:30 +11:00
abeck70
dd2733d73f
OP-1769 Ground support review comments
2015-03-11 13:49:21 +11:00
Alessio Morale
2a729c1742
OP-1776 - Optimize RX exchanging, changes for radiocombridge
2015-03-11 00:54:02 +01:00
Alessio Morale
5657f4757b
OP-1776 - Optimize RX exchanging buffers instead of working a byte at time
2015-03-10 20:35:40 +01:00
abeck70
f053954228
OP-1769 CC compile fixes
2015-03-10 23:07:14 +11:00
abeck70
f9b54fd6c8
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1769-Ground
2015-03-10 22:57:50 +11:00
abeck70
52147333ed
OP-1769 Ground Support
...
1. Receiver.c for ground allows disabled channels for all but yaw and throttle
2. Reciever.c applies a deadband on throttle 0 position
3. Arming understands ground have a 0 throttle position
4. Actuator optimisations in general and fixes for mixing
5. Actuator mixer support for reversible motors
2015-03-10 22:54:51 +11:00
abeck70
dc3610f4e8
OP-1764 uncrustify
2015-03-09 22:31:40 +11:00
abeck70
993481c11e
OP-1764 added flight side sanity checks
2015-03-09 21:31:42 +11:00
Erik Gustavsson
ae24359fb4
OP-1739 Always clear ubxLastAck & ubxLastNak when sending UBX message
2015-03-04 19:38:40 +01:00
Erik Gustavsson
0610262cc3
OP-1739 Add (untested) BeiDou support to flight side.
2015-03-01 17:28:43 +01:00
Erik Gustavsson
60736ea82d
OP-1739 Fill all UAVO slots with SV data
2015-03-01 16:44:30 +01:00
Erik Gustavsson
76ff576b38
uncrustify
2015-02-28 13:18:24 +01:00
Erik Gustavsson
4ada3d90d9
OP-1739 Add "Default" setting to GNSSMode which skips the GNSS selection
...
during autoconfig, e.g. for use with UBX6
2015-02-28 13:17:22 +01:00
Erik Gustavsson
d6bc3878d3
OP-1739 Check for NAKs in autoconfig
2015-02-28 12:25:24 +01:00
Erik Gustavsson
1024406fd9
OP-1739 Only include SVs with SNR>0 in "GPSSatellites", making better
...
use of the 16 slots available.
2015-02-28 11:01:08 +01:00
Erik Gustavsson
baddff3639
OP-1739 Extend SVINFO to 32 SVs. Make UBX parser handle > 256 bytes
...
payload.
2015-02-28 10:48:26 +01:00
Erik Gustavsson
f5b4e4da37
Remove infinite loop from autoconfig state machine.
2015-02-28 08:09:45 +01:00
Erik Gustavsson
2c403d5323
OP-1739 Add GNSS mode to GPS settings UAVO.
2015-02-28 08:09:45 +01:00
Erik Gustavsson
2029255538
OP-1739 Add CFG_GNSS message to autoconfig, with GPS and GLONASS configurable
2015-02-28 08:09:45 +01:00
Alessio Morale
83ce7c7b9a
OP-1750 - cause compiler to trigger an error if a case is missing
2015-02-27 04:01:37 +01:00
Alessio Morale
86111ddefd
OP-1750 - don't waste cycles by rescheduling each StateEstimation sub-step
2015-02-26 06:58:57 +01:00
Alessio Morale
362c0c67b7
OP-1750 - Performance optimization for Ins13 lib
2015-02-26 06:41:19 +01:00
Alessio Morale
e2c9111b39
performance optimizations
2015-02-24 22:41:46 +01:00
Alessio Morale
a01cab1e72
OP-1743 - Fix attitude issue on CC3D
2015-02-24 22:39:34 +01:00
Alessio Morale
bcbb1d08e4
Merge branch 'amorale/OP-1743_fix_cc_target' into next
2015-02-24 22:26:10 +01:00
Alessio Morale
81b9d2e379
OP-1743 - Raise manualcontrol stack
2015-02-24 22:03:18 +01:00
Alessio Morale
a30f115567
OP-1743 - Fix uninitialized objects usage
2015-02-24 22:02:56 +01:00
Alessio Morale
84465ae0cb
OP-1743 - Fix a very ugly error in attitude(cc/cc3d)
2015-02-24 22:02:25 +01:00
abeck70
c5275fc89b
OP-1744 fix crash on revo with ubx config
2015-02-24 22:40:49 +11:00
abeck70
0cd7e20425
Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot
2015-02-23 16:47:12 +11:00
abeck70
57e0a8baf5
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1721
...
Conflicts:
flight/modules/Sensors/sensors.c
2015-02-23 14:40:55 +11:00
Alessio Morale
ad42ca7f16
Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next
2015-02-22 16:28:04 +01:00
Alessio Morale
1f5f5747f7
OP-1685 - Fix glitches on output settings save. It was due to wrong check for bankmode changes.
2015-02-22 14:21:23 +01:00
Alessio Morale
60abae8a8b
OP-1685 - Rename PIN6 to PIN8 (that's Input6)
2015-02-22 13:25:07 +01:00
Alessio Morale
2a90e86e58
OP-1685 - Try to avoid unneded updates to prevent output glitches
2015-02-22 13:12:00 +01:00
Alessio Morale
0cd545f5e4
OP-1658 - Fix ms5611 units
2015-02-20 05:47:31 +01:00
abeck70
b61a76eeae
Merge branch 'next' into abeck/OP-1721
2015-02-19 12:19:28 +11:00
abeck70
bc94fbc2df
OP-1670 uncrustify sanitycheck
2015-02-19 08:27:10 +11:00
abeck70
d157b1f553
OP1670:Sanitycheck acro/rate+cruisecontrol
2015-02-19 08:25:07 +11:00
Laurent Lalanne
26ec24f5b1
Merge remote-tracking branch 'origin/laurent/OP-1601_CC3D_Ubx_only' into next
2015-02-18 02:58:19 +01:00
Laurent Lalanne
25c8d43db3
Merge remote-tracking branch 'origin/laurent/OP-1635_Remove_QuadH_config_tab' into next
2015-02-18 02:56:23 +01:00
Alessio Morale
39513f0533
OP-1685 - Rename OneShot to PWMSync to avoid confusion
2015-02-17 23:20:07 +01:00
Erik Gustavsson
65c24e6315
OP-1691 Release SPI bus before sleeping
2015-02-17 18:08:47 +01:00
Alessio Morale
fbdd88c161
OP-1685 - handle servo outputs with PPM_Pin6, sanity check for flexi_ppm
2015-02-15 19:08:49 +01:00
abeck70
53482be09c
OP-1721 C++ and ARM tools
...
Enable revo C++ support:
1. Set USE_CXX to enable compliation and linkage of C++ source code
2. Disables rtti and exceptions
3. operator new and delete call pios malloc/free
4. Static constructor invocation supported
5. Additional methods, compile options, and need to have main as a cpp to solve various link issues when using static constructors but to avoid adding unnecessary libs.
6. Upgrade arm tools
2015-02-13 12:56:04 +11:00
Alessio Morale
1ad040229c
OP-1685 - implement PPM on pin 6
2015-02-12 00:00:17 +01:00
Alessio Morale
096a321181
OP-1685 - calls sanitychecks after updates to actuatorsettings, update board sanitycheck rules
2015-02-11 23:59:23 +01:00
Alessio Morale
f3fe45750d
OP-1683 - Remove dead code
2015-02-11 22:33:58 +01:00
Alessio Morale
fd299b559a
OP-1685 - Add custom sanity check hook to test OneShot availability
2015-02-11 22:33:57 +01:00
Alessio Morale
26893554c0
OP-1704 - Change Hook alarm level to Critical to prevent arming and allow them to be disabled with DisableSanityChecks
2015-02-11 22:33:57 +01:00
Alessio Morale
a4da83a1be
OP-1685 - Add OneShot compatible configurations
2015-02-11 22:33:57 +01:00
Alessio Morale
f290d6d89d
OP-1685 - Implement OneShot on F1
2015-02-11 22:33:57 +01:00
Laurent Lalanne
6da3c99af2
OP-1635 Remove QuadH in config tab - AirframeType
2015-02-10 22:48:43 +01:00
Laurent Lalanne
cd2ad35ae0
OP-1601 Add command line options for fw_coptercontrol : GCSRECEIVER=YES and DIAG_TASKS=YES
2015-02-08 22:37:24 +01:00
Alessio Morale
4245db7b31
Merge remote-tracking branch 'origin/amorale/OP-1704_sanity_check_hooks' into next
2015-02-08 19:59:57 +01:00
Alessio Morale
3f05aa0e11
OP-1658 - Fix header
2015-02-08 19:02:48 +01:00
Alessio Morale
46521f1c2d
Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next
2015-02-08 17:59:59 +01:00
Alessio Morale
240abe4bab
Merge remote-tracking branch 'origin/amorale/OP-1682_pwm_input_overflow' into next
2015-02-08 17:58:20 +01:00
Erik Gustavsson
dd5abeca9b
OP-1691 Review fix: ensure rounding for vTaskDelay
2015-02-08 11:08:10 +01:00
Laurent Lalanne
f92eba93ef
OP-1601 Ubx only, more efficient to save Ram on CC/CC3D
2015-02-07 17:02:59 +01:00
Laurent Lalanne
f378ca6da7
Merge branch 'laurent/CC3D_Nmea_Gps_14.10' into laurent/CC3D_next_Ubx_only
2015-02-07 14:04:58 +01:00
Laurent Lalanne
5c08f013f1
Allow multiples talkers IDs, define some debug messages and typos
2015-02-06 19:50:09 +01:00
Laurent Lalanne
58e70b2e3a
CC3D special firmware : Nmea GPS
2015-02-06 16:59:41 +01:00
Alessio Morale
108c74da3e
OP-1704 - Reenable an hook if it is reattached
2015-02-05 15:42:58 +01:00
Alessio Morale
aa55b1523d
uncrustify
2015-02-05 01:42:32 +01:00
Alessio Morale
a8e89dffcd
OP-1704 - Add support for custom sanity check hooks
2015-02-05 01:39:58 +01:00
Alessio Morale
85335d62a9
OP-1658 - Fix some headers, remove unused files
2015-02-03 00:33:15 +01:00
Alessio Morale
857cead7c7
OP-1658 - Fixes for other targets (OSD and GPS)
2015-02-03 00:00:06 +01:00
Alessio Morale
fe59057476
OP-1658 - Applying sensor framework to RevoProto
2015-02-03 00:00:06 +01:00
Alessio Morale
3d49362345
OP-1658 - Applying sensor framework to revolution
2015-02-03 00:00:06 +01:00
Alessio Morale
d0ca48e1c4
OP-1658 - Various fixes for MPU6000 and HMC5x83
2015-02-03 00:00:06 +01:00
Alessio Morale
0cf5d163d1
OP-1658 - Fixes for CC3D and its attitude module
2015-02-03 00:00:06 +01:00
Alessio Morale
4f6c7dcb00
OP-1658 - Fixes to other (old and deprecated) sensors
2015-02-03 00:00:05 +01:00
Alessio Morale
4b01d0d2ea
OP-1658 - fix temp interleaving for MS5611
2015-02-03 00:00:05 +01:00
Alessio Morale
adbcdecb41
OP-1365 - adds quick and dirty decays to max and min values
2015-02-03 00:00:05 +01:00
Alessio Morale
bdd9ac7c60
OP-1658 - Support reset for main sensors
2015-02-03 00:00:05 +01:00
Alessio Morale
73a7dc00d4
OP-1658 - MS5611 sensor framework model support
2015-02-03 00:00:05 +01:00
Alessio Morale
ba0e486004
OP-1658 - Add support for barometer in sensor module
2015-02-03 00:00:05 +01:00
Alessio Morale
6904996aba
OP-1658 - add performance counters
2015-02-03 00:00:05 +01:00
Alessio Morale
fc125540b7
OP-1658 - various fixes
...
Conflicts:
flight/pios/common/pios_mpu9250.c
2015-02-03 00:00:05 +01:00
Alessio Morale
621c1e8679
OP-1658 - MPU6000 & HMC5x83 make driver struct const
2015-02-03 00:00:05 +01:00
Alessio Morale
9d36ac4b9c
OP-1658 - Apply to Revolution target
2015-02-03 00:00:05 +01:00
Alessio Morale
cf791db71e
OP-1658 - Implementation of Sensor Module using PiOS Sensors Framework
2015-02-03 00:00:05 +01:00
Alessio Morale
84f577029e
OP-1658 - HMC5x83 sensor device model implementation
2015-02-03 00:00:05 +01:00
Alessio Morale
6341fa7eca
OP-1658 - MPU6000 sensor device model implementation
2015-02-03 00:00:05 +01:00
Alessio Morale
4d8b36adad
OP-1658 - Remove sensors includes from pios.h to prevent cross dependencies
2015-02-03 00:00:05 +01:00
Alessio Morale
49b8b1f93e
OP-1658 - Add PIOS_SENSORS and Sensor framework API
2015-02-03 00:00:05 +01:00
Laurent Lalanne
b9bfcd18d2
OP-1686 Slave Oplink may want to receive PPM data in PPM_Only mode
2015-02-02 21:25:38 +01:00
Karl Knutsson
d161ebbc74
OP-1522 address review comments
2015-02-02 21:25:38 +01:00
Karl Knutsson
137c183ec2
OP-1522 Remove unused channel set cfg
...
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
a3715598c7
OP-1522 New channel allocation
...
Generate a pseudo random list of channels from hmac_sha1 with the
coordid as key.
Enforce channel spacing based on the frequency deviation derived
from the configured data rate.
2015-02-02 21:25:38 +01:00
Karl Knutsson
9bf18490b1
OP-1522: Channel timeout logic
...
Use real time rather than missed pickets when deciding if we are
disconneted. Makes the link less sensitive at higher rates since
higher rates means more chances to get a packet through within the
given time.
2015-02-02 21:25:38 +01:00
Karl Knutsson
b0491da115
OP-1576: Remove unused tx_resent counter
...
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
2015-02-02 21:25:38 +01:00
Karl Knutsson
52c1080ffe
OP-1522 Robustness of OPLink radio
...
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2015-02-02 21:25:38 +01:00
Erik Gustavsson
966ef5ce75
OP-1680 Increase the range and resolution of OPLink PPM values
...
Encode 511 steps plus a single "invalid" value, rather than 256 steps
plus a dedicated valid flag bit. This gives a range of 990 - 2010 us in
steps of 2 us.
2015-02-02 21:25:37 +01:00
Alessio Morale
86a1ca2bcf
OP-1683 - Pulse length must be zeroed at each cycle
2015-02-02 19:58:04 +01:00
Alessio Morale
752f3447d2
OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle
2015-02-02 02:58:22 +01:00
Alessio Morale
a5f601593d
OP-1683 - Put again in place safe limits on pulse width
2015-01-31 15:04:02 +01:00
Alessio Morale
1d08083375
OP-1682 - OneShot125: Change timer clock to 2MHz (that's available as exact value for current targets), raise timer period to prevent glitches
2015-01-31 14:40:40 +01:00
Alessio Morale
025e3596fa
OP-1682 - Fixes from review
2015-01-31 12:55:34 +01:00
Alessio Morale
86571a804d
OP-1683 - Switch to the same schema used by cleanflight.
...
Running in repetitive mode, clearing CCRx after manually triggering update event.
2015-01-30 21:22:14 +01:00
Alessio Morale
632051c0ac
OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot
2015-01-30 21:22:00 +01:00
Erik Gustavsson
1b94f178e8
OP-1691 Remove busy-wait and add yeild points in rfm22_init()
2015-01-28 20:55:36 +01:00
Alessio Morale
1ad4a01b75
OP-1682 - Fixes for review
2015-01-25 21:51:37 +01:00
Alessio Morale
7955f63c98
OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation
2015-01-25 21:25:14 +01:00
Corvus Corax
7e421b99a4
uncrustificationization
2015-01-25 15:48:45 +01:00
Alessio Morale
5f034dfd3e
OP-1683 - Missing uncrustification for f1 stubs.
2015-01-24 15:41:04 +01:00
Alessio Morale
dcc9a5b7dc
OP-1683 - Actuator uses "standard" 1000-2000 range and remap it to 125-250 just before sending to servo to prevent any impact on gcs and other blocks
2015-01-24 13:37:00 +01:00
Alessio Morale
2a10d9d481
OP-1683 - fixes to PIOS_Servo, added code to prevent overflows
2015-01-24 13:35:41 +01:00
Alessio Morale
ec69941c30
OP-1683 - Fix compilation for other targets
2015-01-24 13:08:56 +01:00
Laurent Lalanne
7a24fc62a6
Merge branch 'laurent/OP-1674_GUI_display_oplm_frequency' into next
2015-01-24 01:28:28 +01:00
Laurent Lalanne
5d4b1df85c
OP-1652 Fix comment
2015-01-24 00:56:31 +01:00
Alessio Morale
411416d2a1
OP-1683 - Fix compilation for CC (not yet supported)
2015-01-24 00:18:20 +01:00
Alessio Morale
73c6ae2055
OP-1683 - Add revolution and other f4 targets support
2015-01-23 23:56:39 +01:00
Alessio Morale
47e1312982
OP-1683 - Implement oneshot/oneshot125 mode to actuator module
2015-01-23 23:51:53 +01:00
Alessio Morale
1f95332ff4
OP-1683 - Implement servo synchronous update mode for F4
2015-01-23 23:50:51 +01:00
Laurent Lalanne
c506fc93d6
OP-1674 Revert changes from previous commit in flight side, keep comments changes
2015-01-22 19:49:06 +01:00
Laurent Lalanne
68f9763e73
OP-1652 Typo FlexiIOPin
2015-01-21 14:32:21 +01:00
Laurent Lalanne
bc178b8a95
OP-1652 WS281x pins : Update flight side for revo
2015-01-21 14:12:36 +01:00
Alessio Morale
caa51253db
OP-1682 - Workaround overflow issue with pwm receiver inputs on shared timers.
2015-01-19 21:55:40 +01:00
Laurent Lalanne
4c27a78072
OP-1674 Allow channel 250
2015-01-12 12:57:01 +01:00
Fredrik Arvidsson
c8c3a46735
Uncrustify
2015-01-09 21:49:03 +01:00
abeck70
2b6d79467c
gpsassist:code review comments
...
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
2015-01-09 07:51:37 +11:00
abeck70
b1c94e83d0
gpsassist: One commit new branch
...
Collapsed into one branch for a new code review. Some unnecssary committed files removed.
2015-01-08 13:20:47 +11:00
Mathieu Rondonneau
acc124cacb
OP-1625: DSM: more robust detection of resolution
...
This allows switching back and forth between 10 and 11 bit
code which prevents getting locked up in one or the other.
It also avoids a situation that can cause an infinite
recursion.
This changeset is cherry-picked from TauLabs (b7eaf87502085666d9738ae16c66170f187f3981).
Thanks to Taulabs for improving OpenPilot's DSM autodetect feature.
2014-12-30 21:29:06 -08:00
Fredrik Larsson
4f7fc1bac7
Merge remote-tracking branch 'origin/corvuscorax/OP-1599_positionvario-reworks' into next
2014-12-14 23:45:57 +11:00
Mathieu Rondonneau
6844f8351d
run uncrustify.
2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d
OP-1626: Allow binding to happen within satellite binding window.
...
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8
Uncrustify
2014-11-27 12:05:59 +01:00
Fredrik Larsson
1687ef7e8f
Merge remote-tracking branch 'origin/rel-14.10' into next
2014-11-23 12:15:32 +11:00
Fredrik Larsson
cd94410468
DSM Protocol removed flight firmware
2014-11-22 08:32:00 +11:00
Fredrik Larsson
1942d2ee30
Remove protocol enum
2014-11-22 07:44:55 +11:00
Fredrik Larsson
a45e28afa9
Merge remote-tracking branch 'origin/rel-14.10' into next
2014-11-22 03:39:30 +11:00
Mathieu Rondonneau
b0cc9ce021
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-20 19:58:34 -08:00
Fredrik Larsson
141cf194f1
Signed cats
2014-11-21 11:53:47 +11:00
Fredrik Larsson
8b3ae66932
New cat files after bump
2014-11-21 11:48:17 +11:00
Fredrik Larsson
9480c6efe6
Bump driver version
2014-11-21 11:47:36 +11:00
Fredrik Larsson
17c0102d34
Remove old cat files
2014-11-21 11:47:00 +11:00
Mathieu Rondonneau
1c6ac29218
OP-1625: DSM2/DSMX autodetection of channel resolution.
2014-11-18 19:35:57 -08:00
Laurent Lalanne
4fdcceda65
Merge branch 'laurent/OP-1601_CC_Ram' into next
2014-11-17 03:30:45 +01:00
Laurent Lalanne
357f091f0f
Merge branch 'laurent/OP-1601_CC_Ram' into rel-14.10
2014-11-17 03:29:47 +01:00
Werner Backes
4b68deb878
Disable the "preamble invalid" interrupt for the RFM22b module. It causes
...
high CPU load and isn't used anyway.
2014-11-16 20:16:02 +11:00
Laurent Lalanne
8d08223e8a
OP-1601 Don't use new PVT messages with CC/CC3D
2014-11-15 22:39:17 +01:00
Laurent Lalanne
9e0ede3386
OP-1601 barosensor.c and airspeedstate.c removed from Makefile
2014-11-15 22:17:08 +01:00
Werner Backes
d9a3fac502
Disable the "preamble invalid" interrupt for the RFM22b module. It causes
...
high CPU load and isn't used anyway.
2014-11-15 11:37:06 +01:00
Corvus Corax
5f352f54a3
OP-1599 updated defaults for position roam mode settings, do not low pass filter throttle
2014-11-10 19:06:27 +01:00
Corvus Corax
8fe21ed297
OP-1599 removed autotune from all flight code
2014-11-08 16:17:39 +01:00
Corvus Corax
c0e66a8acf
OP-1599 renamed flightmodes
2014-11-08 16:01:59 +01:00
Corvus Corax
3e5c5bd140
OP-1599 added new mode "courselock" in handlers where missing
2014-11-08 14:04:00 +01:00
Corvus Corax
db0ba763bf
OP-1599 add low pass filter to control input in vario mode to possibly reduce rubber-band effect - needs test and tuning
2014-11-08 13:32:40 +01:00
Corvus Corax
7d2ca3d92f
OP-1599 added course lock mode, renamed other position vario modes
2014-11-08 12:59:55 +01:00
Corvus Corax
c21d3d8a67
uncrustification!
2014-11-08 12:59:16 +01:00
Fredrik Larsson
e7d183b5e6
Merge branch 'rel-14.10' into next
2014-11-07 14:58:41 +11:00
Alessio Morale
6a2666381f
OP-1588 - Improve manualcontrol assumptions to be easier to mantain
2014-11-01 17:54:54 +01:00
Alessio Morale
e04825e7b7
OP-1588 - Remove *relay flight modes
2014-11-01 16:11:11 +01:00
Alessio Morale
b3b2d1ef02
OP-1584 - Remove some unused big UBX messages when running with GPS_MINIMAL
2014-11-01 16:00:03 +01:00
Alessio Morale
71d30a7521
OP-1584 - reduce telemetry queue size
2014-10-31 20:39:52 +01:00
Alessio Morale
c0ca20f661
OP-1584 - Remove auxmagsupport from cc3d for now as it is unused, remove other stuffs from ubx when GPS_MINIMAL is selected
2014-10-31 19:56:38 +01:00
Fredrik Larsson
0ea56989e7
Merge branch 'rel-14.10' into next
2014-10-31 10:12:50 +11:00
Fredrik Larsson
2dc777304e
Merge remote-tracking branch 'origin/abeck/OP_1503v3-yaffs' into next
2014-10-31 10:09:39 +11:00
Corvus Corax
d0417dda84
OP-1573 fix armhandler to not timeout-disarm when flying autonomously
2014-10-29 21:12:57 +01:00
Alex Beck
e2b38d0d7d
Yaffs or dosfs now conditional linkage for simposix yaffs testing
2014-10-28 08:48:38 +11:00
Alex Beck
b4e3fe137b
Removed unrequired signals from handler
2014-10-25 20:01:32 +11:00
Alex Beck
c6aa4ed1d6
Added signal handler that on ctrl-c will unmount the yaffs device(s) and save to the em-norsim file
2014-10-25 19:55:56 +11:00
abeck70
942945850b
Merge branch 'next' into abeck/OP_1503v3-yaffs
2014-10-23 21:25:54 +11:00
a*morale
7c1265ee30
OP-1548 - Change Fusion algorithm names to make clear their pourpose
2014-10-21 00:49:00 +02:00
a*morale
d1a229a9cb
OP-1553 OPLink does not work as non coordinator
...
Revert "OP-1535 - SPI:Use pio for small blocks"
This reverts commit 823a1afad2
2014-10-20 21:46:14 +02:00
Karl Knutsson
5ab924c07e
Revert "OP-1522 Robustness of OPLink radio"
...
This reverts commit 00d9c66867
2014-10-16 08:23:10 +02:00
Karl Knutsson
5ef8d3803d
Revert "OP-1530 Use rfm22b_dev->num_channels"
...
This reverts commit 4e365f6dff
2014-10-16 08:23:10 +02:00
Karl Knutsson
b69e222456
Revert "OP-1532 fix non-ppm mode"
...
This reverts commit 9fd4fb26b9
2014-10-16 08:23:10 +02:00
Alessio Morale
a9f35e2afe
Merge branch 'amorale/OP-1535_mpu_overhaul' into next
2014-10-16 00:51:02 +02:00
Alessio Morale
3ac2874687
OP-1540 - sha1sum was not sent correctly by GPS V9
2014-10-15 00:58:34 +02:00
Alessio Morale
15cd40a907
Merge remote-tracking branch 'origin/skarlsso/OP-1534_add_expo_and_acro_insanity_factor_to_txpid' into next
2014-10-14 21:43:59 +02:00
Alessio Morale
7968bcdb00
Merge remote-tracking branch 'origin/skarlsso/OP-1528_telemetry_on_flexi-io' into next
2014-10-14 21:17:37 +02:00
Alessio Morale
f4ef36f66c
Merge remote-tracking branch 'origin/skarlsso/OP-1536_revo_combridge_garbage' into next
2014-10-14 21:16:52 +02:00
abeck70
de68e0179f
First round review comments
2014-10-14 17:17:59 +11:00
Alessio Morale
fe20e39d5c
OP-1535 - uses union in fast_invsqrt
2014-10-14 05:39:11 +02:00
Alessio Morale
5d074063d1
OP-1535 - Add board specific sensor update rate constant
2014-10-14 05:38:57 +02:00
Fredrik Arvidsson
0fd9758e0c
OP-1525 Gaah.
2014-10-12 15:01:34 +02:00
Fredrik Arvidsson
118209e40d
OP-1525 Updated comment.
2014-10-12 14:59:41 +02:00
Alessio Morale
f2fc5f5616
OP-1513 - Fix time constants, set initial temperature as first sample value
2014-10-11 23:54:21 +02:00
Alessio Morale
823a1afad2
OP-1535 - SPI:Use pio for small blocks
2014-10-11 09:57:25 +02:00
Alessio Morale
9499cf9abc
OP-1535 - Some optimizations for attitude module
2014-10-11 09:57:07 +02:00
Stefan Karlsson
3285519380
OP-1536 Send only the available bytes, not the entire buffer, to the USB CDC RX callback function
2014-10-10 23:51:04 +02:00
Alessio Morale
4a8cfe3f86
OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration
2014-10-10 22:33:50 +02:00
Alessio Morale
28274cdb6b
OP-1535 - Fixes CC3D sensor SPI configuration
2014-10-10 22:33:49 +02:00
Alessio Morale
9350bd65d9
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
...
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
Alessio Morale
c1062124af
OP-1531 - Add temperature filtering for baro compensation
2014-10-10 22:33:47 +02:00
Alessio Morale
46fee43487
OP-1531 Filter temperatures for gyro and accel calibration. calculate new bias every 30 samples
2014-10-10 22:33:42 +02:00
Stefan Karlsson
c03d390269
OP-1534 Update both roll and pitch with TxPID Roll+Pitch.Expo option
2014-10-10 18:49:18 +02:00
Stefan Karlsson
bedb749f72
OP-1534 Add expo and acro insanity factor to TxPID
2014-10-10 17:57:24 +02:00
m_thread
19a7f4cd22
OP-1525 Changed some boundaries in firmware code.
2014-10-10 13:56:11 +02:00
m_thread
bb4d271799
OP-1525 Made the Expo magic number a constant and changed it to 1.00695f.
...
Changed n the firmware code to match the GCS side.
2014-10-10 12:26:22 +02:00
abeck70
948d6546af
yaffs simposix ready for review
...
All yaffs changes for library inclusion, arm compilation, and simposix integration.
2014-10-10 13:21:06 +11:00
Fredrik Arvidsson
9fb474d930
Merge remote-tracking branch 'origin/next' into thread/OP-1525_Acro_GUI
2014-10-09 20:08:19 +02:00
Karl Knutsson
9fd4fb26b9
OP-1532 fix non-ppm mode
...
Always send packets from the coordinator.
Previously the coordinator only always sent packets
on channel 0. This scheme doesn't work with
with the change to use 32 channel.
2014-10-08 20:59:51 +02:00
m_thread
b794c87d3b
Merge remote-tracking branch 'origin/next' into thread/OP-1525_Acro_GUI
2014-10-08 00:56:24 +02:00
Stefan Karlsson
aaebc25eff
OP-1528 Fix Telemetry-only over the Flexi-IO port
2014-10-08 00:31:31 +02:00
Fredrik Larsson
cb6e9fda6d
Merge remote-tracking branch 'origin/havyan/oplink-0' into next
2014-10-08 08:02:48 +11:00
Karl Knutsson
4e365f6dff
OP-1530 Use rfm22b_dev->num_channels
...
Use the number of allocated channel from the num_channels field
in the pios_rfm22b_dev struct rather than from the maximum number
of possible of channels given the configured speed.
2014-10-07 22:50:52 +02:00
Stefan Karlsson
004f5a32a9
OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo
2014-10-06 21:28:09 +02:00
Corvus Corax
270f6d87cd
OP-1516 changed handling of integrals in acrop
2014-10-06 17:47:16 +02:00
Corvus Corax
b05bd2fb34
OP-1516 fixed boundf mistake
2014-10-05 21:07:06 +02:00
Corvus Corax
9525398deb
OP-1516 use fastPow implementation for expo - to make it work on cc3d
2014-10-05 01:25:15 +02:00
Karl Knutsson
00d9c66867
OP-1522 Robustness of OPLink radio
...
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
2014-10-03 22:20:11 +02:00
Karl Knutsson
1c6e9b3cc4
OP-1510 don't hard code tx_power to 100mW
2014-10-03 22:20:11 +02:00
Corvus Corax
bdb5c88d08
OP-1516 added bank configurable expo to stick to allow snappier rate response
2014-10-03 19:07:47 +02:00
Corvus Corax
ac0fccc10a
OP-1516 re-introduce sanity to Acro+
2014-10-03 15:44:02 +02:00
Corvus Corax
17f187468c
Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1516_acro+
2014-10-03 12:34:35 +02:00
Alessio Morale
8e2e534c60
Uncrustify/clean commented code
2014-10-03 11:41:26 +02:00
Alessio Morale
21156dbb9e
Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo_fixed' into next
2014-10-03 11:12:10 +02:00
Alessio Morale
55402880bc
Revert "Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo' into next"
...
This reverts commit 316f7fcf02cfa0ef4671
2014-10-03 11:11:27 +02:00
Alessio Morale
e553014596
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006
Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next
2014-10-03 00:37:39 +02:00
Corvus Corax
a12e2708a2
OP-1516 fixed obvious issues
2014-10-02 23:38:06 +02:00
Corvus Corax
dcb354b0b1
OP-1516 Enable PiroComp per setting
2014-10-02 22:42:08 +02:00
Corvus Corax
3ad47bfa0a
OP-1516 added Acro+ stabi mode
2014-10-02 22:13:10 +02:00
Corvus Corax
2586dafa8c
OP-1511 added comment to filter code for better readability
2014-10-02 21:18:52 +02:00
Alessio Morale
a5fd040b49
OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample
2014-10-01 21:13:44 +02:00
Alessio Morale
ae9f30c729
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
2014-10-01 02:07:46 +02:00
Alessio Morale
0ffb99f228
OP-1477 - Fix issue with quick request to DDC port, change baud rate to 57600, fix sys rate, optimize uart tx
2014-10-01 02:06:03 +02:00
Alessio Morale
c1641613ce
OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample
2014-09-30 15:12:37 +02:00
Fredrik Larson
efde46cf7a
Merge branch 'next' into fw_wiz
2014-09-30 15:41:19 +10:00
Alessio Morale
b2aa73acf6
Merge remote-tracking branch 'origin/amorale/OP-1499_autoconfig_retries' into next
2014-09-29 21:30:16 +02:00
Alessio Morale
9e0596c2c5
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
...
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
5054bda433
OP-1477 - Fix SYS message rate
2014-09-28 20:29:52 +02:00
Alessio Morale
f2058dfc7f
OP-1477 - Remove hardcoded strings for initialization config
2014-09-28 15:01:19 +02:00
Alessio Morale
4c76620402
OP-1507 - Reduce memory usage for CopterControl
2014-09-27 22:40:17 +02:00
Alessio Morale
93cf6b457f
OP-1507 - optimize com fifo usage when RX callback receives a single byte
2014-09-27 00:20:15 +02:00
Alessio Morale
d0b37bab28
OP-1507 - Handles GPS data a chunk at time instead of a single byte at time.
2014-09-27 00:17:00 +02:00
Alessio Morale
be747138e1
OP-1275 - Optimize fifo for single char operations
2014-09-25 20:26:35 +02:00
Alessio Morale
7e789ccc69
OP-1379 - Clear output pin at the end of dma cycle
2014-09-25 00:59:39 +02:00
Alessio Morale
78756f6873
OP-1499 - Failed Autoconfig will raise an Error Alarm. When AC does start it will reset any previous ack. Force update to Autoconfig Status in GPSPositionSensor UAVO. Add a small pause between each config step
2014-09-24 06:12:48 +02:00
Alessio Morale
8712a1dfdc
OP-1477 - Board support for updated SYS message
2014-09-24 01:06:49 +02:00
Alessio Morale
c772442723
OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info)
2014-09-24 01:06:41 +02:00
m_thread
7bcdff9f2f
Merge remote-tracking branch 'origin/next' into thread/OP-1222_FW_Wizard
...
Conflicts:
ground/openpilotgcs/src/plugins/setupwizard/setupwizard.cpp
ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationsource.h
2014-09-23 22:30:49 +02:00
Alessio Morale
7e78194e12
OP-1477 - change led rate so that's less annoying
2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333
Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering
2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2
Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next
2014-09-23 13:33:32 +02:00
Fredrik Larsson
5bbd6724d6
Merge remote-tracking branch 'origin/skarlsso/OP-1493_discoveryf4bare_support_in_gcs' into next
2014-09-23 21:11:15 +10:00
m_thread
19aa3ed5a3
Merge remote-tracking branch 'origin/next' into thread/OP-1222_FW_Wizard
2014-09-22 23:05:21 +02:00
Fredrik Larson
c36e9a9122
Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next
2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce
Arming for Helis on Revo
2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926
OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01)
2014-09-22 00:56:49 +02:00
Alessio Morale
3c6a8e0395
OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current
2014-09-21 23:32:52 +02:00
Corvus Corax
41e062373d
OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999
2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425
OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors
2014-09-21 16:38:52 +02:00
Alessio Morale
7a9a0868c9
OP-1275 - split persistence handling out of UavobjectManager. stubs are used if target deos not support persistency
2014-09-20 21:02:51 +02:00
Alessio Morale
cedb4f127d
OP-1477 - typos and other fixes from review
2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef
Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)"
...
This reverts commit 1a0ab29050
2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106
OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets
...
(caused for example by sensor disagreement or calibration issues)
2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050
OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)
2014-09-19 15:52:11 +02:00
m_thread
226fe186c4
Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks
2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f
OP-1474 Demultiplex TPS settings when pid banks are updated
2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e
OP-1474 Make it possible to select axes to scale
2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185
Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks
...
Conflicts:
ground/openpilotgcs/src/plugins/config/stabilization.ui
2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5
OP-1474 Fix label compile error
2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519
OP-1474 Make it possible to select the combination of P, I, and D to scale
2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f
OP-1474 Use PID banks for the TPS settings
2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99
Removed the now unused position Ki from VtolPathFollowerSettings UAVObject
2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186
OP-1379 - Rebuild and simplify the queuing mechanism
2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031
OP-1477 - typo in mallocFailed trap
2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7
OP-1477 - a bit of cleanup, some flash bits moved to a separate file
2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb
OP-1477 - add watchdog support
2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5
OP-1477 - Split and cleanup gpssys module
2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623
OP-1477 - various changes
...
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c
OP-1477 - GPS SYS: for multi device support of HMC5x driver
2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa
OP-1477 - initial framer + autoconfiguration and some fixes
...
- Added a framing code for gps data to be able to interleave mag sentences.
- Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
- change axis orientation to match revo when both boards conector sides are are aligned
2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17
OP-1477 - Use UBX_DDC driver
2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0
OP-1477 - move to PIOS_I2C
2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b
OP-1477 - add support for SPI/MAG
2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6
OP-1477 - Add GPS System Module
2014-09-16 22:40:54 +02:00
Alessio Morale
531d80a69c
OP-1476 - Fix other targets for OP_DFU changes
2014-09-16 22:40:54 +02:00
Alessio Morale
b971b713d6
OP-1476 - Fix Bootloader jumpToApp condition and change speed to 57600
2014-09-16 22:40:53 +02:00
Alessio Morale
7e73c59e90
OP-1476 - Fixes for Bootloader
...
- Allocate 10KBytes for bootloader;
- Replace pios_com_msg with pios_com for ssp support
- Change Speed to 9600 for higher reliability
2014-09-16 22:40:53 +02:00
Alessio Morale
c44dac2447
OP-1476 - fix bootloader for serial support
2014-09-16 22:40:53 +02:00
Alessio Morale
3eca0fefef
OP-1477 - Change mag GAIN to 1.3
2014-09-16 22:40:53 +02:00
Alessio Morale
250b7fe962
OP-1477 - Fix mag DRDY/GPIO support
2014-09-16 22:40:52 +02:00
Alessio Morale
14862c687d
OP-1477 - Add ubx handling libraries
2014-09-16 22:40:52 +02:00
Alessio Morale
a6fc5c9190
OP-1477 - Fixes for multi device support of HMC5x driver
2014-09-16 22:40:52 +02:00
Alessio Morale
bcb30ecbf3
OP-1477 - enable temp compensation and fix axis orders
2014-09-16 22:40:52 +02:00
Alessio Morale
4890ef3ab0
OP-1477 - Add support for Flash
2014-09-16 22:40:52 +02:00
Alessio Morale
146c1764fd
OP-1477 - UBX_DDC driver implementation
2014-09-16 22:40:52 +02:00
Alessio Morale
f2a0daac5c
OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS
2014-09-16 22:40:52 +02:00
Alessio Morale
71af403c9d
OP-1477 - some cleanup
2014-09-16 22:40:51 +02:00
Alessio Morale
7e55d6ff41
OP-1477 - add support for SPI/MAG
2014-09-16 22:40:51 +02:00
Alessio Morale
b4f9c7c2b1
OP-1477 - BL fix issue with usart name
2014-09-16 22:40:51 +02:00
Alessio Morale
b3a971e91d
OP-1477 - support for mag
2014-09-16 22:40:51 +02:00
Alessio Morale
c28eb4fbca
OP-1477 - Add SPI Support
2014-09-16 22:40:51 +02:00
Alessio Morale
46424523b0
OP-1477 - Firmware usart Working
2014-09-16 22:40:51 +02:00
Alessio Morale
1970e0a870
OP-1477 - Fix bootloader
2014-09-16 22:40:50 +02:00
Alessio Morale
9b61fc611b
OP-1477 - Add platform support
2014-09-16 22:40:50 +02:00
Alessio Morale
81ae43ac40
OP-1275 - fix Watchdog
2014-09-16 22:40:50 +02:00
Laurent Lalanne
bc9e6b24f9
Merge remote-tracking branch 'origin/laurent/OP-1491_HQuad_mixing_values' into laurent/OP-1222_FW_Wizard
...
Conflicts:
ground/openpilotgcs/src/plugins/setupwizard/pages/multipage.cpp
ground/openpilotgcs/src/plugins/setupwizard/resources/connection-diagrams.svg
Conflicts resolved in artwork, same style as FW branch
2014-09-16 18:55:43 +02:00
Alessio Morale
984a7a675c
OP-1275 - add ChangeBaud to PIOS_COM_MSG
2014-09-16 00:42:51 +02:00
Alessio Morale
20273e77aa
OP-1275 - Fix CPU usage due to uncleared irq flags
2014-09-16 00:42:51 +02:00
Alessio Morale
94c39caa50
OP-1275 - Fix PIOS_COM to be used with no PIOS_INCLUDE_FREERTOS defined
2014-09-16 00:42:51 +02:00
Alessio Morale
ffac550601
OP-1275 - Optimize fifo for single char operations
2014-09-16 00:42:51 +02:00
Alessio Morale
0c7f4905da
OP-1275 - Fix PiOS_EXTI
2014-09-16 00:42:51 +02:00
Alessio Morale
de4180f990
OP-1275 - Reenable usart after init in ChangeBaud
2014-09-16 00:42:51 +02:00
Alessio Morale
212170bcb9
OP-1275 Fix pios_delay DiffuS
2014-09-16 00:42:51 +02:00
Alessio Morale
3c2300ffda
OP-1275 Change several parameters const
2014-09-16 00:42:50 +02:00
Alessio Morale
0682e60053
OP-1275 Add a memory barrier before remapping the vector table
2014-09-16 00:42:50 +02:00
Alessio Morale
baad216810
OP-1275 uncrustification
2014-09-16 00:42:50 +02:00
Alessio Morale
55d52ceab0
OP-1275 Working initial PIOS_I2C implementation
2014-09-16 00:42:50 +02:00
Alessio Morale
cd7c76aa13
OP-1275 move implementation specific enums out of common pios_i2c_priv.h
2014-09-16 00:42:50 +02:00
Alessio Morale
5986e72a29
OP-1275 Add SPI Implementation. DMA block transfer needs to be fixed with handling for LDMA_TX and LDMA_RX
2014-09-16 00:42:49 +02:00
Alessio Morale
2ca1adafe5
OP-1275 support HSI oscillator, fix gpio, usart and sys (vector remapping not working yet)
2014-09-16 00:42:49 +02:00
Alessio Morale
ff82d50ee0
OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example)
2014-09-16 00:42:49 +02:00
Alessio Morale
7a3bc518c2
OP-1275 fixes unused vars in SPL
2014-09-16 00:42:49 +02:00
Alessio Morale
bb7d4aef04
OP-1275 fixes for ld scripts, fix for pios_delay timer setup. pios_sys
2014-09-16 00:42:49 +02:00
Alessio Morale
4d1e8cf5a7
OP-1275 F0 support: fix make scripts, bootloader size, linker scripts, add other missing pios drivers.
2014-09-16 00:42:49 +02:00
Alessio Morale
5ab9806279
OP-1275 add Stack_Change support
2014-09-16 00:42:48 +02:00
Alessio Morale
5a60c254ed
OP-1275 copy relevant F1 PiOS drivers (yet unmodified)
2014-09-16 00:42:48 +02:00
Alessio Morale
7eca9f80e3
OP-1275 Initial commit for f0 support: add CMSIS, Std Peripheral drivers
2014-09-16 00:42:48 +02:00
Alessio Morale
b4c1a856c7
OP-1274 Implement 4 bytes aligment for standard malloc (while keeping 8byte alignment for RTOS Stuctures) as done for M3
2014-09-16 00:42:48 +02:00
Alessio Morale
c49497f2e0
Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next
2014-09-15 23:49:54 +02:00
Stefan Karlsson
09a943f17f
OP-1493 Make Vehicle and TX Wizards work with the discoveryf4bare target
2014-09-15 23:43:58 +02:00
Stefan Karlsson
dd86e7f9c4
OP-1493 Update BOARD_REVISION for discoveryf4bare and fix AutoUpdate
2014-09-15 23:30:17 +02:00
Laurent Lalanne
48ce38370c
OP-1491 HQuad_mixing_values First commit : add QuadH artwork, config tab
2014-09-15 22:25:07 +02:00
Alessio Morale
ece0d64c9f
OP-1434 - Update a (old, now wrong) comment
2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929
OP-1434 - Use vector_lengthf, fix a typo in a comment
2014-09-14 21:44:41 +02:00
Werner Backes
2f0c43c6e5
Wrong I2C bus used for the onboard magnetometer
2014-09-15 03:11:31 +10:00
Stefan Karlsson
bdbe875a90
OP-1474 Use ActuatorDesiredThrust as default source for TPS
2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6
Don't use I-term in the VtolPathFollower's position control loop for now.
...
See OP-1483 for why it's considered not to work as expected.
2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd
OP-1434 - Switch to common aux mag support library
2014-09-13 16:15:02 +02:00
Alessio Morale
76b9b1c40f
OP-1406 - Create a support library to share common calibration and sample publishing logic
2014-09-13 16:14:34 +02:00
Stefan Karlsson
662b29ac05
OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor
2014-09-10 22:49:49 +02:00
Stefan Karlsson
344172e879
OP-1474 Add missing stdint.h include to mathmisc.h
2014-09-10 01:03:49 +02:00
Stefan Karlsson
7afb211330
OP-1474 Revert TPS debugging code
2014-09-10 00:42:40 +02:00
Stefan Karlsson
0e2af9c654
OP-1474 Extract line and curve functions out to mathmisc.h, nan check and unit tests
2014-09-10 00:34:06 +02:00
Alessio Morale
c777f9e194
OP-1406 - Fixes from review comments
2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19
OP-1474 Thrust PID scaling
2014-09-08 00:14:49 +02:00
Fredrik Larrson
d91db0af6f
Revert "Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next"
...
This reverts commit a39e393274ebfdaf28b5
2014-09-08 02:31:02 +10:00
Fredrik Larrson
a39e393274
Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2014-09-08 01:54:59 +10:00
Fredrik Larrson
ebfdaf28b5
Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next
2014-09-08 01:35:39 +10:00
Corvus Corax
4a19f98c95
OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo
2014-09-06 13:51:30 +02:00
Alessio Morale
cf9329b8ee
OP-1440 - Change timing slightly to support also WS2812B
2014-09-06 12:12:11 +02:00
Alessio Morale
233dec6d8d
OP-1379 - Various fixes and additions
...
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Alessio Morale
e549c71da6
OP-1379 - add unit testing
2014-09-06 12:11:52 +02:00
Karl Knutsson
ec0d44e1b0
OP-1473 Fix EOF handling for R7008SB
2014-09-04 18:15:36 +02:00
Alessio Morale
884f797d61
OP-1370 - Add SBAS configuration options
2014-09-02 21:26:56 +02:00
Alessio Morale
2ddbb72bcf
OP-1370 - Fixes parameters name, values and cosmetic issues.
2014-09-02 21:26:43 +02:00
Alessio Morale
78662eb356
OP-1370 - Explicitly disable unneeded messages
2014-09-02 00:36:04 +02:00
Alessio Morale
3157c4e501
OP-1370 - Fix configuration storage on GPS
2014-09-02 00:35:26 +02:00
Alessio Morale
4715219a4b
OP-1434 - Enable magFilter for CF as it is needed to get Mag data for initial estimation
2014-08-31 23:39:30 +02:00
Corvus Corax
b64326208e
Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement
2014-08-31 18:43:48 +02:00
Philippe Renon
575e89f1a1
OP-1319 fixed minor spelling mistake in firmware code
2014-08-30 18:09:23 +02:00
Alessio Morale
f69e476ed3
Merge branch 'amorale/OP-1452_comusbbridge_improvements' into next
2014-08-29 20:25:29 +02:00
Alessio Morale
10f5d7c531
Merge remote-tracking branch 'origin/skarlsso/OP-922_fix_fw_DEBUG_compile_errors' into next
2014-08-26 01:05:32 +02:00
Alessio Morale
8418804ce4
OP-1406 - Revert magstate to non normalized values
2014-08-25 16:00:33 +02:00
Corvus Corax
551392d6bf
OP-1456 fixed macro for uav object field to array casting and added compile time asserts to assure its working
2014-08-24 16:19:15 +02:00
Fredrik Larson
a0fda9a60f
Merge branch 'txpid_typo' into rel-14.06.01
2014-08-24 10:24:24 +10:00
Fredrik Larson
35a6807e63
Merge branch 'txpid_typo' into next
2014-08-24 10:23:14 +10:00
Laurent Lalanne
ccb97f014c
OP-1241 TxPID_Bank3 : Similar bug while GET data from bank
2014-08-24 02:15:24 +02:00
Corvus Corax
6faf1a73ac
OP-1456 get rid of cast_struct_to_array because it is error prone!
2014-08-24 00:16:34 +02:00
Corvus Corax
e7aa12be94
Merge remote-tracking branch 'origin/corvuscorax/OP-1454_weakleveling-hotfix' into next
2014-08-23 15:25:24 +02:00
Alessio Morale
1d3f9399c3
OP-1370 - Fix sensortype not shown for non PVT GPSs
2014-08-22 23:35:13 +02:00
Alessio Morale
5a3ea5fde0
OP-1370 - Add an option to store the configuration onto GPS
2014-08-22 23:16:38 +02:00
Corvus Corax
c5e0e58e6a
OP-1454 - fix weak leveling bug
2014-08-22 22:42:12 +02:00
Alessio Morale
5bf866c96e
OP-1370 - Remove autoconfig from CC (removing sat info to spare some ram and adding autoconfig does not make much sense), fixed compilation for all other targets
2014-08-22 22:34:52 +02:00
Alessio Morale
c4d5234ee6
OP-1370 - Show AutoConfig status in GPSPositionSensor
2014-08-22 22:32:57 +02:00
Alessio Morale
69b76b665c
OP-1370 - Add automatic sentence rate configuration based on HW version (llh+velned etc. vs PVT)
2014-08-22 21:27:50 +02:00
Alessio Morale
f430af83c5
OP-1370 - Add configuration support for nav rate and dynamic model.
...
Added stub for sentence rate configuration (enable_sentences(...))
2014-08-22 19:00:46 +02:00
Alessio Morale
1846806d17
OP-1370 - Refactor AutoConfig code out of UBX.*
2014-08-22 10:10:21 +02:00
Alessio Morale
903a77669e
OP-1370 - Add "management tasks" support for UBX, used for self configuration.
...
Initial state machine asking for gps version. Configuration messages definition
2014-08-22 02:43:30 +02:00
Alessio Morale
e64ab1f1ff
OP-1370 - Configure bidirectional COM port for GPS
2014-08-22 02:41:36 +02:00
Stefan Karlsson
070c2569ff
OP-922 Add pios_user_fs_id to oplinkmini to fix DEBUG=YES link error
2014-08-21 22:37:38 +02:00
Stefan Karlsson
607f7ae4bc
OP-922 Add missing UAVO source files to the fw_osd target
2014-08-21 20:15:56 +02:00
Alessio Morale
c6a82c5d23
OP-1370 - refactors UBX code to use a table of messages and handler instead of neverending switches
2014-08-21 19:34:36 +02:00
Alessio Morale
002c35163a
OP-1370 - Add support for mon-ver ack-ack and ack-nak messages for gps hw version detection
2014-08-21 19:34:36 +02:00
Alessio Morale
b6c053565e
OP-1434 - use degrees for rotation, fix Calibration gui
2014-08-21 19:34:36 +02:00
Alessio Morale
85be5ba7af
OP-1434 - handle mag rotation
2014-08-21 19:34:36 +02:00
Alessio Morale
8df34b01d7
OP-1434 - Fix heapremaining data type
2014-08-21 19:34:36 +02:00
Alessio Morale
0198129a1c
OP-1434 - Add 230400 to GPS port speed list
2014-08-21 19:34:36 +02:00
Alessio Morale
ce1e4e728e
OP-1434 - Support for mag calibration
2014-08-21 19:34:36 +02:00
Alessio Morale
397bfdc08b
OP-1434 - Add support for OP custom sentences on flight board
2014-08-21 19:34:36 +02:00
Alessio Morale
55557ecd60
OP-1434 - Add gps extended status
2014-08-21 19:34:35 +02:00
Alessio Morale
83a3822798
OP-1406 - Reenable mag offset estimation for onboard mag only right now
2014-08-21 19:34:35 +02:00
Alessio Morale
84758a6731
OP-1406 - Always feeds mag data even if invalid
2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3
OP-1406 - Improve handling of external magnetometer, add additional settings
2014-08-21 19:34:35 +02:00
Alessio Morale
7abbf5fa5a
OP-1406 - Fixes for all other targets
2014-08-21 19:34:35 +02:00
Alessio Morale
cced294760
OP-1406 - Add support for aux mag calibration settings.
...
todo:
- GCS handling for extenal mag calibration
2014-08-21 19:34:35 +02:00
Alessio Morale
9d7a493c26
OP-1406 - Allows filtermag to switch between onboard and aux mag
2014-08-21 19:34:35 +02:00
Alessio Morale
52ad63be33
OP-1406 - Add support for Aux magnetometer on flight controllers
2014-08-21 19:34:35 +02:00
Alessio Morale
bb085ddab9
OP-1452 - Auto enable COMBridge module if a port is configured as ComBridge
2014-08-21 11:43:36 +02:00
Alessio Morale
8940b7a50b
OP-1452 - Apply ComBridge port speed change without rebooting
2014-08-21 11:42:29 +02:00
Corvus Corax
4653c77296
OP-1156 removed old pathfollower implementations
2014-08-20 17:00:50 +02:00
Corvus Corax
1540fe0716
OP-1156 cleaned up updateAutoPilotVtol() function
2014-08-20 16:02:48 +02:00
Corvus Corax
70460e593e
OP-1156 fixes as suggested per review
2014-08-20 15:29:29 +02:00
Corvus Corax
779eb8d772
OP-1156 placed Werners positionhold speed offset back in place
2014-08-19 23:14:46 +02:00
Corvus Corax
760ae118e9
OP-1156 changed yaw math from interval [0..360] to [-180..180]
2014-08-16 20:48:56 +02:00
Stefan Karlsson
3d8d803c33
OP-922 Fix missing ppm_id to ppm_out_id rename
2014-08-16 16:58:16 +02:00
Stefan Karlsson
4ba9208727
OP-922 Comment out the unused DEBUG variable in rscode
2014-08-16 16:58:16 +02:00
Stefan Karlsson
232d9c10b2
OP-922 Make it explict that matrix_mult_3x3f should be static inline
2014-08-16 16:58:16 +02:00
Stefan Karlsson
34983a2d28
OP-922 Fix typo in pios_tim.c
2014-08-16 16:58:15 +02:00
Stefan Karlsson
22e981ea87
OP-922 Mark PIOS_DEBUG_Panic with attribute noreturn
2014-08-16 16:57:50 +02:00
Corvus Corax
8daa5dfa12
Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification
2014-08-16 13:58:40 +02:00
Corvus Corax
915c24c8b6
OP-1156 changed PID control loops to use generic pid library, readded unnecessary integral and derivative terms to vtolpathfollower
2014-08-15 21:00:48 +02:00
Corvus Corax
b1675a2804
OP-1156 added vtolpathfollower velocity limits to attitude control
2014-08-15 19:23:41 +02:00
Corvus Corax
b562fcb02e
OP-1156 fix path logic to not deviate from correct altitude too much
2014-08-15 17:56:57 +02:00
Alessio Morale
30df5de332
uncrustify
2014-08-13 15:54:52 +02:00
Alessio Morale
5dbbda3adc
Merge remote-tracking branch 'origin/amorale/OP-1404_ublox_pvt_support' into next
2014-08-13 15:27:10 +02:00
Alessio Morale
cefc182a5e
Merge remote-tracking branch 'origin/amorale/OP-1405_25qXXX_support' into next
2014-08-13 15:25:16 +02:00
Alessio Morale
376aa0052f
OP-1379 - Initial Notify module. Supports:
...
1) predefined seqences associated with each flightmode. 2) fixed table with alarm index and assciated led warn/error sequences/repetition rate.
2014-08-13 15:18:17 +02:00
Alessio Morale
f556a5e335
OP-1379 - Split simple notification and external lednotifications libraries
2014-08-13 15:14:55 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Alessio Morale
fd92fdfadf
OP-1379 - initial version of external led sequencer implemented in notification lib.
...
Alert overlay not working yet.
2014-08-12 22:18:36 +02:00
Corvus Corax
09e8b38407
OP-1156 fixed EmergencyFlyaway detection algorithm
2014-08-12 19:12:05 +02:00
Corvus Corax
56e4127bca
OP-1156: add path_direction as a source for yaw as suggested by Werner :)
2014-08-12 18:18:07 +02:00
Alessio Morale
1f74977472
OP-1379 add base types for colour, Initial ext rgb led api definition
2014-08-12 09:44:44 +02:00
Corvus Corax
ea4e7962a6
OP-1156 fixed wrong callback ID assignment for pathfollower callback diagnostics
2014-08-10 21:17:55 +02:00
Corvus Corax
8944419b0f
OP-1156 refactored pathfollower - new unified module as delayed callback - compiles but untested
2014-08-10 19:41:40 +02:00
Corvus Corax
a3d18bb578
Merge remote-tracking branch 'origin/D-Lite/PathFollowerImprovements' into corvuscorax/OP-1156_pathfollower-unification
2014-08-10 13:53:52 +02:00
Corvus Corax
ca1923f76f
OP-1156: Added new (stub template) pathFollower Module as well as builkd environment changes to compile it instead of old pathfollowers
2014-08-10 12:50:38 +02:00
Stefan Karlsson
454d491e48
Merge branch 'next' into skarlsso/OP-1397_add_responsiveness_to_txpid
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configtxpidwidget.cpp
ground/openpilotgcs/src/plugins/config/configtxpidwidget.h
2014-08-10 10:06:44 +02:00
Alessio Morale
1158c70a46
OP-1404 - minor cleanup, removed some duplicated code
2014-08-09 12:49:21 +02:00
Alessio Morale
2932045e3d
OP-1404 Fix NMEA data parsing for GSV
2014-08-09 12:04:25 +02:00
Corvus Corax
c5fae5ee84
Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation
2014-08-09 10:43:48 +02:00
Gasté Olivier
dfb21482f4
DSM protocol improvement
...
added item in DSM protocol in GCS
2014-08-08 13:14:39 +02:00
Alessio Morale
a18009e875
OP-1429 Change datatype for elevation and azimuth respectively to int8 and int16.
2014-08-06 12:55:07 +02:00
Alessio Morale
d04d630273
OP-1404 fix include file path
2014-08-05 17:25:28 +02:00
Alessio Morale
23d2368984
OP-1404 Fix nav-pvt.pdop data type
2014-08-05 16:50:38 +02:00
Alessio Morale
ea63def1c8
OP-1404 fix compilation with PIOS_GPS_MINIMAL, fix some copy/pastem madness
2014-08-04 18:17:01 +02:00
Alessio Morale
240eb8e573
OP-1404 - Prevent mixing pvt and other sentence solution data. use PDOP from pvt
2014-08-04 17:56:28 +02:00
Alessio Morale
d3569927a0
OP-1404 fix unit scaling for pvt, use check_msgtracker,
2014-08-04 11:04:35 +02:00
Alessio Morale
6f4b1d5c03
OP-1404 uncrustify
2014-08-03 15:27:30 +02:00
Alessio Morale
c68dd3c00e
OP-1404 - PVT will provide SOL+VELNED+POSLLH+Time. DOP will provide all dop values
2014-08-03 15:04:40 +02:00
Alessio Morale
1dd05c24cc
OP-1404 - Fix compilation with PIOS_GPS_MINIMAL defined
2014-08-03 12:50:42 +02:00
Alessio Morale
0976fb6e1b
OP-1404 - Add support for UBlox PVT sentence
2014-08-03 12:50:21 +02:00
Alessio Morale
a6502518be
OP-1405 - Add support for 25qxxx series of flash memories
2014-08-02 23:05:36 +02:00
Alessio Morale
016ba6940d
OP-1403 - drop attitude/revolution as it has been supersede by StateEstimation module
2014-08-02 20:48:56 +02:00
Alessio Morale
d856bbdb50
OP-1403 - Update targets
2014-08-02 20:48:48 +02:00
Alessio Morale
6a3cb7b808
OP-1403 - Add support for multiple hmc* devices
2014-08-02 20:48:41 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
2a8429320d
OP-1403 - Support HMC5983 temperature sensor/compensation
2014-08-02 20:48:24 +02:00
Alessio Morale
3c1b689224
OP-1403 - Add generic I2C/SPI HMC5x83 mag driver
2014-08-02 20:48:16 +02:00
Alessio Morale
6884e9f378
Merge remote-tracking branch 'origin/amorale/OP-1395_flight_log_enhancements' into next
2014-08-02 20:41:58 +02:00
Stefan Karlsson
7f344da977
OP-1397 Round to instead of floor to uint8_t values in txpid.c
2014-08-01 14:51:39 +02:00
Werner Backes
f29f7fa680
Missing argument for path_endpoint added.
2014-07-31 16:31:16 +02:00
Werner Backes
446415457d
Don't limit the path to strictly be between start and endpoint.
2014-07-31 10:56:25 +02:00
Werner Backes
70e34f44cf
Revert to the original behaviour of calling "fly_endpoint" if we have a
...
zero-length path.
2014-07-31 10:52:06 +02:00
Werner Backes
9ab6299247
We don't want zero-length path_direction vector.
2014-07-31 10:18:39 +02:00
Stefan Karlsson
a7ee6fa764
OP-1397 Add initial support for rate mode response (deg/s)
2014-07-30 23:49:56 +02:00
Stefan Karlsson
2113e1a2e1
OP-1397 Add initial support for attitude mode response (deg)
2014-07-30 23:48:55 +02:00
Werner Backes
065ba1a0c8
Adds a 3D mode to path_vector. This allows vertical path segments without
...
position changes. PathStatus now also contains correction_direction and
path_direction to make path following behaviour more transparent.
2014-07-29 13:16:47 +02:00
Werner Backes
7da0034775
Improved automatic landing algorithm to better track descend speed.
...
Desired descend speed is now a FlightModeSetting.
2014-07-29 13:16:43 +02:00
Werner Backes
3e2961420d
Add a 3D mode to path_endpoint. This allows FlyDirect waypoints to do
...
vertical movements without changing position.
2014-07-29 13:16:39 +02:00
Corvus Corax
5edb2dbae3
Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation
2014-07-26 17:01:03 +02:00
Corvus Corax
5451003a58
Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
...
Conflicts:
flight/modules/Airspeed/airspeed.c
flight/modules/Airspeed/gps_airspeed.c
2014-07-26 16:16:02 +02:00
Alessio Morale
e5b52d46d9
Merge remote-tracking branch 'origin/amorale/OP-1358_add_separate_rotation_calibration_offset_revo_only' into rel-14.06
2014-07-24 23:47:14 +02:00
Corvus Corax
a199fd1cb0
OP-1412 do not dicard mags after init
2014-07-23 22:40:43 +02:00
Andres
7f8e709e17
OP-1317 uncrustify
2014-07-23 08:04:52 +02:00
Andres
e195befc3a
OP-1317 removed comments
2014-07-23 08:03:48 +02:00
Andres
d6a93cccaf
OP-1317 added M_2PI_F and M_2PI_D constants for 2*pi in pios_math.h
2014-07-23 08:03:12 +02:00
Corvus Corax
95799cf11b
OP-1412 delay ekf initialization until magnetometers are reporting valid data
2014-07-22 23:49:41 +02:00
Andres
9589167914
OP-1317 added Butterworth filter code files flight/libraries/math/butterworth.*
2014-07-22 20:05:09 +02:00
Andres
ffabbc577c
OP-1317 moved Butterworth filter code into flight/libraries/math/butterworth.*
2014-07-22 20:03:43 +02:00
Alessio Morale
9bee143476
OP-1358 Revo:Implement roll/pitch trim settings separated from "nominal" board rotation settings
2014-07-21 11:01:07 +02:00
Andres
df4d211f8b
OP-1317 added a proper initialization of the Butterworth filter values
2014-07-20 16:22:27 +02:00
Andres
d7d20bb10f
OP-1317 merge with branch corvuscorax/OP-1317_IMU_wind_estimation
2014-07-20 15:46:35 +02:00
Andres
ddde6d1f5e
OP-1317 changed int into int32_t in function Quaternion2PY()
2014-07-20 15:26:05 +02:00
Alessio Morale
62755c4cab
unrustify
2014-07-16 20:39:12 +02:00
Alessio Morale
25c54ac16d
Merge remote-tracking branch 'origin/laurent/OP-1063_Multi_config_Hexa_fixes' into rel-14.06
2014-07-16 20:07:31 +02:00
Laurent Lalanne
1b447ee644
OP-1063 Multi_config_Hexa_fixes Stupid typo error with OctoX in VtolPathFollower.
2014-07-14 23:29:48 +02:00
Laurent Lalanne
c26e33964a
OP-1063 Multi_config_Hexa_fixes Added OctoX, define new mixer table for Octo(p) and OctoX. New motor definition for OctoX (NNE, ENE...) Fixes for svg frames. Defined default settings for OctoP/X in setupwizard (but disabled)
2014-07-13 13:58:18 +02:00
Laurent Lalanne
a46480a99b
OP-1063 Multi_config_Hexa_fixes : Added real HexaX, renamed HexaX > HexaH
...
Added artwork in config and wizard svg. Cleanup on svg connection diagram (layers)
DO NOT USE until mixers are fixed
2014-07-10 06:01:28 +02:00
Alessio Morale
6c38eda192
OP-1395 - Reset log num when changing flight num. fix flight num update logic
2014-07-09 23:05:38 +02:00
Alessio Morale
61d26d7fd8
op-1395 - automatically increment flight number after disabling log.
2014-07-09 08:39:32 +02:00
Alessio Morale
03d03cfb06
OP-1395 add a vTaskDelay when waiting for dma transfer to complete when using FreeRTOS.
2014-07-08 02:54:17 +02:00
Alessio Morale
711c3609b6
OP-1395 - Add support for Fast read, explicitly set SPI clock speed to maximum allowed by all parts used
2014-07-08 02:53:25 +02:00
Alessio Morale
55b325966a
OP-1395 - Pack several objects on a single Debug Log "slot", after ten consecutive failures (log full) gives up trying to save to prevent wasting time. Use PIOS_Delay for timestamp
2014-07-08 02:47:09 +02:00
rodneygrainger
3aaf1a3367
OP-1391 - Fix to prevent arming if unsafe due to current Thrust Mode (Altitude Hold/Vario)
2014-07-07 20:47:23 +12:00
Alessio Morale
4389f767f3
uncrustify
2014-07-02 23:27:58 +02:00
Corvus Corax
80d3d7c954
OP-1374 hotfix to filtercf on checking of magnetometer calibration fabsf()
2014-06-29 18:36:46 +02:00
Alessio Morale
30491c7992
OP-1374 - Autostart the relevant PathFollower for known frame types
2014-06-29 17:23:57 +02:00
Alessio Morale
3ae85f6434
OP-1374 - Issue a Boot Alarm (reboot) if frame type is changed
2014-06-29 17:23:15 +02:00
Alessio Morale
52a909185b
OP-1374 - Add sanitycheck API to detect frame type
2014-06-29 17:22:41 +02:00
Alessio Morale
1b823b7b92
Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/StateEstimation/filtermag.c
flight/modules/System/systemmod.c
2014-06-26 20:31:27 +02:00
Alessio Morale
4e3a68ac6c
uncrustify
2014-06-22 20:34:04 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab
Merge branch 'amorale/OP-1365_pios_instrumentation' into next
...
Conflicts:
flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
263fd64ab5
Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next
2014-06-22 16:06:21 +02:00
Alessio Morale
f30dd414ac
Merge branch 'amorale/OP-1227_cc_high_cpu_utilization' into next
2014-06-22 16:06:08 +02:00
Corvus Corax
3f11f4f6b2
OP-1371 fix for hitl: turn of receiver alarm if in gcs control mode (but set warning)
2014-06-18 22:46:44 +02:00
Corvus Corax
f1b7f339b6
OP-1371 setting to disable sanity checks for debugging and testing - will set config alarm to warning if set
2014-06-18 21:39:16 +02:00
Corvus Corax
b40a114a0a
OP-1371 treat hitl as nav capable fusion algorithm if positionstate is set by sim
2014-06-18 21:29:55 +02:00
Corvus Corax
7898d507ca
drive-by bugfix in #ifdefed code affecting simposix
2014-06-18 20:41:58 +02:00
Corvus Corax
7933f2154c
OP-1317 - project 3d airspeed vector unto fuselage vector to get scalar airspeed estimate
2014-06-18 12:44:10 +02:00
Alessio Morale
fa24d21237
OP-1365 fix comments
2014-06-18 02:01:16 +02:00
Alessio Morale
eb5deb3eca
OP-1274 Remove unneeded cast from task name in xTaskCreate call
2014-06-18 01:47:43 +02:00
Corvus Corax
3d9f1ca93a
OP-1317 changed imu wind estimation to actually estimate wind (and lowpass filter it)
2014-06-17 18:51:26 +02:00
Corvus Corax
205edac762
Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
2014-06-17 18:14:27 +02:00
Alessio Morale
aa71df2831
OP-943 fix ut_
2014-06-12 06:53:07 +02:00
Alessio Morale
61f71add4c
OP-943 add missing pios_mem.c from previous commit
2014-06-11 23:54:28 +02:00
Alessio Morale
b3b90f1f66
OP-943 inline pios_mem function have issues with simposix.
2014-06-11 22:15:40 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
50bef2dc12
OP-943 change make scripts to defines automatically PIOS_TARGET_PROVIDES_FAST_HEAP when available
2014-06-11 22:15:40 +02:00
Alessio Morale
d8f08a7916
OP-943 Add Malloc for "FastHeap" (ccsram)
...
- Use a separate mallocs for thread stack and RTOS structures heap
- Add a pios_mem API to be able to use fast ram (CCM) when available
2014-06-11 22:15:30 +02:00
Alessio Morale
622519b7c2
OP-1365 Flight code instrumentation API: add documentation to pios_instrumentation_helper, uncrustification
2014-06-10 22:13:20 +02:00
Alessio Morale
16cb081f5c
OP-1365 Flight code instrumentation API: Sample use of instrumentation in Atittude module.
...
When instrumentation is enabled at board level (pios_board.h, enable PIOS_INCLUDE_INSTRUMENTATION) PIOS_INSTRUMENT_MODULE setups the module to be instrumented.
2014-06-10 21:38:12 +02:00
Alessio Morale
8ba5741f99
OP-1365 Flight code instrumentation API: Add some helper macros to simplify the addition of instrumentation code to a module.
...
Note: Look at next commit for an example use case.
2014-06-10 21:34:33 +02:00
Alessio Morale
698d132f9c
OP-1365 Flight code instrumentation API: Changed API to use handlers (opaque pointers) to counter struct instead of an index, fix Search function, create does check if coutner exists and return existing handler
2014-06-10 21:24:28 +02:00
Alessio Morale
07d2e27276
OP-1274: Update to FreeRTOS 8.0.1
2014-06-10 19:42:11 +02:00
Alessio Morale
ee8ffed465
OP-1274: Force 8 bytes alignment for RTOS structures while using 4 bytes alignment for the remaining memory allocation operations to save RAM
2014-06-10 19:10:37 +02:00
Corvus Corax
f89557c045
OP-1287 improved deadband implementation to be jump-free
2014-06-10 09:59:37 +02:00
Alessio Morale
92b48b09ff
OP-1227 Fix high CPU usage: remove oversample buffer calculation in several part of pios_adc all over the code.
2014-06-09 19:28:22 +02:00
Alessio Morale
de5aed6864
OP-1227 Fix high CPU usage: Disable Instrumentation
2014-06-09 16:29:53 +02:00
Alessio Morale
8710ff4070
OP-1227 Fix high CPU usage: Some minor to Actuator module.
2014-06-08 22:39:16 +02:00
Alessio Morale
52c1d69c19
OP-1227 Fix high CPU usage: Change gyro oversampling to 46 (400Hz update rate) to lessen the cpu load and jitter due accel rate mismatch
2014-06-08 22:14:06 +02:00
Alessio Morale
7acb0ad385
OP-1227 Fix high CPU usage: Apply missing parenthesis to prevent a fdiv for temp calculatin
2014-06-08 22:02:10 +02:00
Alessio Morale
a9f1d55fea
OP-1227 Fix high CPU usage: Optimize Memory usage in ADC driver.
...
- performs undersampling in two steps operating with a half buffer at time;
- Skip costly undersampling for Temperature channel;
- some optimizations to the downsample loops;
- apply compiler speed optimization to PIOS_ADC_downsample_data()
2014-06-08 22:01:05 +02:00
Alessio Morale
843987484b
OP-1227 Fix high CPU usage: Avoid several float division in Attitude module, change optimization for attitude estimation function
2014-06-08 21:48:35 +02:00
Alessio Morale
d51b7ce2d4
OP-1227 Fix high CPU usage: Changes to attitude module:
...
- changed Expected rate to 500 (it was erroneously defined as 666Hz)
- use the optimized api to fetch accel samples
2014-06-08 21:47:00 +02:00
Alessio Morale
a0d68c6afb
OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed
...
Note: Counter 0xA3450001 is the time it takes to transfer the requested number of samples
2014-06-08 21:33:18 +02:00
Alessio Morale
c9d97639b0
OP-1302 Renable Idle Hook in CC/CC3D
2014-06-08 20:33:35 +02:00
Corvus Corax
a19ebfec14
OP-1287 separate stick response setting for vertical and horizontal in PositionVario/AutoCruise modes
2014-06-07 23:06:11 +02:00
Alessio Morale
197d381937
OP-1365 Flight code instrumentation API: Add helper function to track mean period between its calls
2014-06-07 18:11:34 +02:00
Alessio Morale
eb35803b5b
OP-1365 Flight code instrumentation API: Add support for Revolution
2014-06-07 17:44:27 +02:00
Alessio Morale
11d0bbf5f8
OP-1365 Flight code instrumentation API: Use systemMod to publish counters
2014-06-07 17:43:36 +02:00
Alessio Morale
e8a3706351
OP-1365 Flight code instrumentation API: Fix wrapper not publishing last counter
2014-06-07 17:33:37 +02:00
Corvus Corax
c3d20e72b9
OP-1287 made velocity calculation implicit in pathfollower based on distance only
2014-06-07 16:30:39 +02:00
Corvus Corax
8f9b5b2282
OP-1287 fix to lower speed limit in autocruise do not allow absolute zero speed to not loose direction
2014-06-07 16:16:55 +02:00
Corvus Corax
090db92e8a
OP-1287 removed waypoint start position from positionvario logic in favor of static variable
2014-06-07 16:07:20 +02:00
Alessio Morale
08e4ec7fd3
OP-1365 Flight code instrumentation API: Fix wrapper documentation/headers
2014-06-07 15:45:27 +02:00
Corvus Corax
ae8c22280b
OP-1287 fixed handling of pitch and throttle channels from manualcontrolcommand
2014-06-07 15:31:38 +02:00
Alessio Morale
9db264a457
OP-1365 Flight code instrumentation API: Add CopterControl support
2014-06-07 00:47:06 +02:00
Alessio Morale
1c92edb18b
OP-1365 Flight code instrumentation API: Fix min/max handling
2014-06-06 22:38:49 +02:00
Alessio Morale
5e9d107c0b
OP-1365 Flight code instrumentation API: Add support to DiscoveryF4bare target
2014-06-06 22:23:02 +02:00
Alessio Morale
2396350f2f
OP-1365 Flight code instrumentation API: Implementation of UAVObject wrapper layer
2014-06-06 22:19:27 +02:00
Alessio Morale
520e721bdd
OP-1365 Flight code instrumentation API: PiOS Implementation
2014-06-06 22:15:18 +02:00
Corvus Corax
070672e0f0
OP-1287 changed deadband behaviour to be more consistent
2014-06-04 23:22:04 +02:00
Corvus Corax
89472196d1
OP-1287 implemented new flightmodes in plan.c
2014-06-04 16:52:39 +02:00
Corvus Corax
de7e0d0781
OP-1287 added handler definitions for new flightmodes
2014-06-04 10:29:45 +02:00
Corvus Corax
07667027ee
OP-1287 added autocruise mode too to manualcontrol
2014-06-04 10:23:59 +02:00
Corvus Corax
2260f5dacc
OP-1287 added autocruise mode, too
2014-06-04 10:23:37 +02:00
Corvus Corax
ec5052bdba
OP-1287 added new flightmodes to manualcontrol.c
2014-06-04 10:04:40 +02:00
Corvus Corax
86441169de
OP-1287 added new flightmodes to sanity checks
2014-06-04 10:02:19 +02:00
Corvus Corax
f0c4b8f9c7
OP-1287 renamed VELOCITYCONTROL back to AltitudeVario for consistency
2014-06-03 18:42:54 +02:00
Corvus Corax
aa6c5f9d15
OP-1363 cleanups to sanitychecks
2014-06-01 20:28:38 +02:00
Corvus Corax
63b08ec129
OP-1363 check for navigation enabled (outdoor) fusion algorithm if any flightmode is configured to use a path follower
2014-06-01 12:17:42 +02:00
Corvus Corax
5bfb57e081
Merge branch 'next' into amorale/OP-1355_fix_mag_board_rotation_issue
2014-05-26 17:19:56 +02:00
Corvus Corax
c6e168c972
Merge branch 'next' into corvuscorax/OP-1352_Headwind-improvements
2014-05-26 17:17:43 +02:00
Corvus Corax
bf16738fd3
Merge branch 'next' into amorale/OP-1350_takeoff_location_handling
2014-05-26 17:16:47 +02:00
Corvus Corax
76f83fc131
OP-1352 some cosmetic cleanups, explicitly marked float constants as type float
2014-05-25 13:27:38 +02:00
Alessio Morale
3d67b7567e
OP-1355 Fix Mag scaling being calculated after applying board rotation.
2014-05-25 11:28:43 +02:00
Andres
642f740be3
OP-1317 Bettered jump treatment in yaw calculation and some cosmetics
2014-05-24 10:04:39 +02:00
Andres
9e80c4da9c
OP-1317 Low-pass filter parameters added to airpeedSettings: IMUBasedEstimationLowPassPeriod1 pre-filter period in seconds, IMUBasedEstimationLowPassPeriod2 filter period in seconds. Oscillations with shorter periods than these, are filtered. If airspeed has too much noise increase IMUBasedEstimationLowPassPeriod2, else if it is too smooth descrease it.
2014-05-23 11:55:06 +02:00
Andres
822b067d98
OP-1317 Corrected error in calculation of low pass filter cut-off frequencies
2014-05-23 07:37:57 +02:00
Andres
f273abf6c8
OP-1317 Merged with next
2014-05-22 17:01:38 +02:00
Andres
a83379425c
OP-1317 Small optimizations of code, delete of debug variables in airspeed object and uncrustify
2014-05-22 10:00:50 +02:00
Andres
423645392b
OP-1317 Changed filtering method of IMU airspeed calculation into a Butterworth second order filter
2014-05-21 19:32:02 +02:00
Andres
41dd85b741
OP-1317 Changed filtering method of IMU airspeed calculation into a Butterworth second order filter
2014-05-21 19:25:27 +02:00
Alessio Morale
b2ecf23a07
OP-1350 simposix build fixes :( fix altitude calculation for RTB
2014-05-19 22:21:32 +02:00
Alessio Morale
3db6c3c86b
OP-1350 fix build for revoproto and discoveryf4
2014-05-19 21:15:17 +02:00
Alessio Morale
92bf876654
OP-1350 refactor into a plans library all functions dealing with initialization and execution of PathFollower/pathplanner commands for manualcontrol
2014-05-19 18:35:18 +02:00
Alessio Morale
070eccbf1f
OP-1274 reenable idle hook for new led handling
2014-05-18 23:43:49 +02:00
Alessio Morale
5e83374af4
OP-1274 fixes for DiscoveryF4Bare target
2014-05-18 23:43:14 +02:00
Alessio Morale
4296b21025
OP-1274 looks like excluding vTaskSuspend does not cope with "strict" compilation options
2014-05-18 22:57:16 +02:00
Alessio Morale
af8fe1f921
OP-1274 Fixes for Simposix
2014-05-18 22:56:57 +02:00
Alessio Morale
3ec8c18fad
OP-1274 fixes for RevoProto
2014-05-18 22:56:54 +02:00
Alessio Morale
99540d5db5
OP-1274 fixes for OSD
2014-05-18 22:56:51 +02:00
Alessio Morale
36e304f579
OP-1274 fixes for revolution
2014-05-18 22:56:48 +02:00
Alessio Morale
e9fff2b6fa
OP-1274 fixes for OPLink
2014-05-18 22:56:44 +02:00
Alessio Morale
be5cc66bd3
OP-1274 fixes for Coptercontrol firmware
2014-05-18 22:56:29 +02:00
Alessio Morale
921abb5131
OP-1274 update freertos files. Architecture specific files are left into their original FreeRTOS folder structure
2014-05-18 22:53:23 +02:00
Alessio Morale
d88d73e7fe
OP-1350 Make RTB safer pick the lowest between PositionState.Down and TakeOffLocation.Down.
2014-05-18 14:41:45 +02:00
Corvus Corax
5153806289
OP-1352 cleaned up some code comments
2014-05-17 23:27:30 +02:00
Corvus Corax
5544e9c984
OP-1352 redesigned course calculation to take complete wind vector into account
2014-05-17 22:02:04 +02:00
Corvus Corax
2357ee1774
hotfix: allow arming in Stabilized 4,5,6
2014-05-16 23:39:36 +02:00
Alessio Morale
2048440053
OP-1350 fix a review defect(a set intead of TakeOffLocationStatusGetget). Check if status is valid beside locationSet
2014-05-16 23:32:11 +02:00
Alessio Morale
f3df459278
OP-1350 remove checks for valid TakeOffLocation. It is already handled in takeoffLocationHandler
2014-05-16 21:56:44 +02:00
Alessio Morale
ffa5e66d8b
OP-1350 fix a bug that overwrite TakeOffLocation when changing mode to preset after an arming sequence. cleanup and get rid of "pending" status
2014-05-16 21:53:05 +02:00
Corvus Corax
9306cbc7c5
OP-1352 Headwind-improvements for FixedWingPathFollower
2014-05-16 20:20:40 +02:00
Alessio Morale
80bd04075f
OP-1350 Rename ReturnToHomeAltitudeOffset to ReturnToBaseAltitudeOffset
2014-05-16 18:51:04 +02:00
Alessio Morale
edba1bc71d
OP-1350 split Init function out of Handler, added missing UAVO initalize, cleanup code
2014-05-16 18:31:49 +02:00
Alessio Morale
8dcee11cb8
OP-1350 change destination for ReturnToBase to takeoffLocation
2014-05-16 12:38:18 +02:00
Alessio Morale
9ec21d2ade
OP-1350 fix simposix target
2014-05-16 02:30:17 +02:00
Alessio Morale
063ae8afe0
OP-1350 add a TakeOffLocation Handler to manualcontrol
2014-05-16 02:28:12 +02:00
Alessio Morale
52892aa7d8
OP-1350 add uavo to DiscoveryF4Bare
2014-05-16 02:19:52 +02:00
Alessio Morale
86b0829823
OP-1350 Add takeofflocation UAVO
2014-05-16 00:40:19 +02:00
Alessio Morale
58bba31c72
Merge remote-tracking branch 'origin/amorale/OP-1312_pios_ws2811_driver' into next
2014-05-15 20:30:43 +02:00
Alessio Morale
e082fbc04e
Merge remote-tracking branch 'origin/amorale/OP-1330_cannot_set_homelocation.set_false' into next
2014-05-15 20:30:32 +02:00
Alessio Morale
7182fe0194
Merge remote-tracking branch 'origin/amorale/OP-1329_airspeed_fixes' into next
2014-05-15 20:30:10 +02:00
Corvus Corax
065a632123
Merge branch 'corvuscorax/OP-1325_Event-System-Error-Alarm' into next
2014-05-15 00:13:20 +02:00
Andres
c5372dd0b4
OP-1317 Added better comments on the function of the partial calculation of the rotation matrix. And added a remark on the debuging variable in the airspeed object definition
2014-05-13 17:30:50 +02:00
Alessio Morale
47976312c2
OP-1330 reset Home Set delay timer if Set==true
2014-05-12 22:56:28 +02:00
Alessio Morale
8bbb56337b
OP-1312 keep pulse timings low to have more margin to handle bus contentions and irq response time.
2014-05-11 18:57:06 +02:00
Alessio Morale
953b7cc2a7
OP-1330 Fix a compilation issue with CC/CC3D
2014-05-11 12:37:20 +02:00
Alessio Morale
3c5a41049b
Merge branch 'amorale/OP-1302_updated_led_behaviour' into next
2014-05-11 12:01:53 +02:00
Alessio Morale
45efaffcf1
OP-1330 fix namings/uncrustify
2014-05-11 11:38:08 +02:00
Alessio Morale
7155805b79
OP-1329 Move gps airspeed initialization checks under "sensor changed" test
2014-05-11 11:33:11 +02:00
Alessio Morale
711c5ea79d
OP-1312 Fixes the flicker issue in Revo. Raised the Transfer complete irq priotity to prevent delays stopping the timer.
2014-05-11 10:43:24 +02:00
Andres
530c0aa967
OP-1317 Added two file (actually renames)
2014-05-10 14:51:22 +02:00
Andres
02e62f91ed
OP-1317 Apadted airspeed calculation from ground speed and orientattion changes: applied extended IMU wind estimation, filtering takes place now with Holt-Winters double exponential smoothing on orientation vector and speed vector, matrix calculation replaced by a direct calculation of the fuselage vector, renamed gps_airspeed into imu_airspeed because estimation relies on imu results and a n estimate of ground speed and not directly a GPS signal
2014-05-10 14:50:24 +02:00
Corvus Corax
6e6c66d270
Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm
2014-05-08 23:21:39 +02:00
Corvus Corax
d916fa5aad
uncrustification
2014-05-08 23:18:38 +02:00
Corvus Corax
47a891e594
OP-1325 fix event system warnings to be errors
2014-05-08 23:05:55 +02:00
Alessio Morale
7a85c0939c
Merge branch 'amorale/OP-975_calibration_process_changes' into next
2014-05-08 22:56:16 +02:00
Alessio Morale
16df6bc58c
Merge branch 'amorale/OP-1307_discovery_f4_bare' into next
2014-05-08 22:56:03 +02:00
Bertrand Oresve
743cf4e4b5
OP-1308 Merge with next (conflict with stabilization)
2014-05-08 22:33:45 +02:00
Alessio Morale
94beebc3d0
OP-1302 Fixes for current next. Show flightmode everytime it changes when disarmed
2014-05-08 22:27:55 +02:00
Alessio Morale
e5d6726bb6
Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour
2014-05-08 22:27:08 +02:00
Bertrand Oresve
fd1b786868
Merge branch 'next'
...
Conflicts:
flight/libraries/sanitycheck.c
flight/modules/Stabilization/stabilization.c
2014-05-08 21:36:54 +02:00
Corvus Corax
b7f479cd68
Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into next
2014-05-08 21:05:26 +02:00
Alessio Morale
3a451c9737
OP-1329 Trigger a SensorType change the first time Task runs to set AirspeedSensor UAVO when sensor is None
2014-05-08 19:58:42 +02:00
Alessio Morale
08dcdefc1f
OP-1329 set SensorConnected to false when sensorType is changed to none.
2014-05-08 19:48:30 +02:00
Corvus Corax
16c46458ef
Merge branch 'corvuscorax/OP-1332_fix-alarm-gracetime-issue' into corvuscorax/OP-1161_magnetometer-alarm
2014-05-08 00:01:02 +02:00
Corvus Corax
3a2b5d6332
OP-1332 fix problem in alarm handling where alarms are unable to reset on their own
2014-05-07 23:50:39 +02:00
Corvus Corax
1add404d80
OP-1161 reimplemented magnetometer plausibikity check using vector
...
length only
2014-05-07 23:47:14 +02:00
Alessio Morale
516f359645
OP-1329 fix a cherry-pick issue
2014-05-07 23:23:51 +02:00
Corvus Corax
2da1f2aa09
Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1161_magnetometer-alarm
2014-05-07 22:26:20 +02:00
Corvus Corax
153d2fb786
OP-1309 Fixed bug in Quaternion Stabilization Error Calculation in regards to independent axis
2014-05-07 22:12:01 +02:00
Alessio Morale
8462adb579
OP-1330 Delay SetHomeLocation call from GPS module to be able to save HomeLocation.Set=false
2014-05-07 20:43:34 +02:00
