1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

1230 Commits

Author SHA1 Message Date
Alessio Morale
c1641613ce OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-09-30 15:12:37 +02:00
Alessio Morale
b2aa73acf6 Merge remote-tracking branch 'origin/amorale/OP-1499_autoconfig_retries' into next 2014-09-29 21:30:16 +02:00
Alessio Morale
9e0596c2c5 Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
Conflicts:
	Makefile
	flight/targets/boards/discoveryf4bare/firmware/Makefile
	flight/targets/boards/revolution/firmware/Makefile
2014-09-29 21:26:31 +02:00
Alessio Morale
5054bda433 OP-1477 - Fix SYS message rate 2014-09-28 20:29:52 +02:00
Alessio Morale
f2058dfc7f OP-1477 - Remove hardcoded strings for initialization config 2014-09-28 15:01:19 +02:00
Alessio Morale
4c76620402 OP-1507 - Reduce memory usage for CopterControl 2014-09-27 22:40:17 +02:00
Alessio Morale
d0b37bab28 OP-1507 - Handles GPS data a chunk at time instead of a single byte at time. 2014-09-27 00:17:00 +02:00
Alessio Morale
78756f6873 OP-1499 - Failed Autoconfig will raise an Error Alarm. When AC does start it will reset any previous ack. Force update to Autoconfig Status in GPSPositionSensor UAVO. Add a small pause between each config step 2014-09-24 06:12:48 +02:00
Alessio Morale
8712a1dfdc OP-1477 - Board support for updated SYS message 2014-09-24 01:06:49 +02:00
Alessio Morale
c772442723 OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info) 2014-09-24 01:06:41 +02:00
Alessio Morale
7e78194e12 OP-1477 - change led rate so that's less annoying 2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333 Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering 2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2 Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next 2014-09-23 13:33:32 +02:00
Fredrik Larson
c36e9a9122 Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next 2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce Arming for Helis on Revo 2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926 OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01) 2014-09-22 00:56:49 +02:00
Corvus Corax
41e062373d OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999 2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425 OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors 2014-09-21 16:38:52 +02:00
Alessio Morale
cedb4f127d OP-1477 - typos and other fixes from review 2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)"
This reverts commit 1a0ab29050.
2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106 OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets
(caused for example by sensor disagreement or calibration issues)
2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050 OP-1483 implement leaky integral on position control loop in pathfollower (vtol only) 2014-09-19 15:52:11 +02:00
m_thread
226fe186c4 Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks 2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f OP-1474 Demultiplex TPS settings when pid banks are updated 2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e OP-1474 Make it possible to select axes to scale 2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185 Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks
Conflicts:
	ground/openpilotgcs/src/plugins/config/stabilization.ui
2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5 OP-1474 Fix label compile error 2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519 OP-1474 Make it possible to select the combination of P, I, and D to scale 2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f OP-1474 Use PID banks for the TPS settings 2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99 Removed the now unused position Ki from VtolPathFollowerSettings UAVObject 2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186 OP-1379 - Rebuild and simplify the queuing mechanism 2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031 OP-1477 - typo in mallocFailed trap 2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7 OP-1477 - a bit of cleanup, some flash bits moved to a separate file 2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb OP-1477 - add watchdog support 2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5 OP-1477 - Split and cleanup gpssys module 2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623 OP-1477 - various changes
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c OP-1477 - GPS SYS: for multi device support of HMC5x driver 2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa OP-1477 - initial framer + autoconfiguration and some fixes
- Added a framing code for gps data to be able to interleave mag sentences.
 - Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
 - change axis orientation to match revo when both boards conector sides are are aligned
2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17 OP-1477 - Use UBX_DDC driver 2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0 OP-1477 - move to PIOS_I2C 2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b OP-1477 - add support for SPI/MAG 2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6 OP-1477 - Add GPS System Module 2014-09-16 22:40:54 +02:00
Alessio Morale
ff82d50ee0 OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example) 2014-09-16 00:42:49 +02:00
Alessio Morale
c49497f2e0 Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next 2014-09-15 23:49:54 +02:00
Alessio Morale
ece0d64c9f OP-1434 - Update a (old, now wrong) comment 2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929 OP-1434 - Use vector_lengthf, fix a typo in a comment 2014-09-14 21:44:41 +02:00
Stefan Karlsson
bdbe875a90 OP-1474 Use ActuatorDesiredThrust as default source for TPS 2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6 Don't use I-term in the VtolPathFollower's position control loop for now.
See OP-1483 for why it's considered not to work as expected.
2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd OP-1434 - Switch to common aux mag support library 2014-09-13 16:15:02 +02:00
Stefan Karlsson
662b29ac05 OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor 2014-09-10 22:49:49 +02:00
Stefan Karlsson
7afb211330 OP-1474 Revert TPS debugging code 2014-09-10 00:42:40 +02:00
Alessio Morale
c777f9e194 OP-1406 - Fixes from review comments 2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19 OP-1474 Thrust PID scaling 2014-09-08 00:14:49 +02:00
Corvus Corax
4a19f98c95 OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo 2014-09-06 13:51:30 +02:00
Alessio Morale
233dec6d8d OP-1379 - Various fixes and additions
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
2014-09-06 12:11:53 +02:00
Alessio Morale
884f797d61 OP-1370 - Add SBAS configuration options 2014-09-02 21:26:56 +02:00
Alessio Morale
2ddbb72bcf OP-1370 - Fixes parameters name, values and cosmetic issues. 2014-09-02 21:26:43 +02:00
Alessio Morale
78662eb356 OP-1370 - Explicitly disable unneeded messages 2014-09-02 00:36:04 +02:00
Alessio Morale
3157c4e501 OP-1370 - Fix configuration storage on GPS 2014-09-02 00:35:26 +02:00
Alessio Morale
4715219a4b OP-1434 - Enable magFilter for CF as it is needed to get Mag data for initial estimation 2014-08-31 23:39:30 +02:00
Corvus Corax
b64326208e Merge branch 'next' into corvuscorax/OP-1456_struct_to_array_improvement 2014-08-31 18:43:48 +02:00
Philippe Renon
575e89f1a1 OP-1319 fixed minor spelling mistake in firmware code 2014-08-30 18:09:23 +02:00
Alessio Morale
f69e476ed3 Merge branch 'amorale/OP-1452_comusbbridge_improvements' into next 2014-08-29 20:25:29 +02:00
Alessio Morale
8418804ce4 OP-1406 - Revert magstate to non normalized values 2014-08-25 16:00:33 +02:00
Fredrik Larson
35a6807e63 Merge branch 'txpid_typo' into next 2014-08-24 10:23:14 +10:00
Laurent Lalanne
ccb97f014c OP-1241 TxPID_Bank3 : Similar bug while GET data from bank 2014-08-24 02:15:24 +02:00
Corvus Corax
6faf1a73ac OP-1456 get rid of cast_struct_to_array because it is error prone! 2014-08-24 00:16:34 +02:00
Corvus Corax
e7aa12be94 Merge remote-tracking branch 'origin/corvuscorax/OP-1454_weakleveling-hotfix' into next 2014-08-23 15:25:24 +02:00
Alessio Morale
1d3f9399c3 OP-1370 - Fix sensortype not shown for non PVT GPSs 2014-08-22 23:35:13 +02:00
Alessio Morale
5a3ea5fde0 OP-1370 - Add an option to store the configuration onto GPS 2014-08-22 23:16:38 +02:00
Corvus Corax
c5e0e58e6a OP-1454 - fix weak leveling bug 2014-08-22 22:42:12 +02:00
Alessio Morale
5bf866c96e OP-1370 - Remove autoconfig from CC (removing sat info to spare some ram and adding autoconfig does not make much sense), fixed compilation for all other targets 2014-08-22 22:34:52 +02:00
Alessio Morale
c4d5234ee6 OP-1370 - Show AutoConfig status in GPSPositionSensor 2014-08-22 22:32:57 +02:00
Alessio Morale
69b76b665c OP-1370 - Add automatic sentence rate configuration based on HW version (llh+velned etc. vs PVT) 2014-08-22 21:27:50 +02:00
Alessio Morale
f430af83c5 OP-1370 - Add configuration support for nav rate and dynamic model.
Added stub for sentence rate configuration (enable_sentences(...))
2014-08-22 19:00:46 +02:00
Alessio Morale
1846806d17 OP-1370 - Refactor AutoConfig code out of UBX.* 2014-08-22 10:10:21 +02:00
Alessio Morale
903a77669e OP-1370 - Add "management tasks" support for UBX, used for self configuration.
Initial state machine asking for gps version. Configuration messages definition
2014-08-22 02:43:30 +02:00
Alessio Morale
c6a82c5d23 OP-1370 - refactors UBX code to use a table of messages and handler instead of neverending switches 2014-08-21 19:34:36 +02:00
Alessio Morale
002c35163a OP-1370 - Add support for mon-ver ack-ack and ack-nak messages for gps hw version detection 2014-08-21 19:34:36 +02:00
Alessio Morale
b6c053565e OP-1434 - use degrees for rotation, fix Calibration gui 2014-08-21 19:34:36 +02:00
Alessio Morale
85be5ba7af OP-1434 - handle mag rotation 2014-08-21 19:34:36 +02:00
Alessio Morale
8df34b01d7 OP-1434 - Fix heapremaining data type 2014-08-21 19:34:36 +02:00
Alessio Morale
0198129a1c OP-1434 - Add 230400 to GPS port speed list 2014-08-21 19:34:36 +02:00
Alessio Morale
ce1e4e728e OP-1434 - Support for mag calibration 2014-08-21 19:34:36 +02:00
Alessio Morale
397bfdc08b OP-1434 - Add support for OP custom sentences on flight board 2014-08-21 19:34:36 +02:00
Alessio Morale
83a3822798 OP-1406 - Reenable mag offset estimation for onboard mag only right now 2014-08-21 19:34:35 +02:00
Alessio Morale
84758a6731 OP-1406 - Always feeds mag data even if invalid 2014-08-21 19:34:35 +02:00
Alessio Morale
e511190ad3 OP-1406 - Improve handling of external magnetometer, add additional settings 2014-08-21 19:34:35 +02:00
Alessio Morale
9d7a493c26 OP-1406 - Allows filtermag to switch between onboard and aux mag 2014-08-21 19:34:35 +02:00
Alessio Morale
bb085ddab9 OP-1452 - Auto enable COMBridge module if a port is configured as ComBridge 2014-08-21 11:43:36 +02:00
Alessio Morale
8940b7a50b OP-1452 - Apply ComBridge port speed change without rebooting 2014-08-21 11:42:29 +02:00
Corvus Corax
4653c77296 OP-1156 removed old pathfollower implementations 2014-08-20 17:00:50 +02:00
Corvus Corax
1540fe0716 OP-1156 cleaned up updateAutoPilotVtol() function 2014-08-20 16:02:48 +02:00
Corvus Corax
70460e593e OP-1156 fixes as suggested per review 2014-08-20 15:29:29 +02:00
Corvus Corax
760ae118e9 OP-1156 changed yaw math from interval [0..360] to [-180..180] 2014-08-16 20:48:56 +02:00
Corvus Corax
8daa5dfa12 Merge branch 'next' into corvuscorax/OP-1156_pathfollower-unification 2014-08-16 13:58:40 +02:00
Corvus Corax
915c24c8b6 OP-1156 changed PID control loops to use generic pid library, readded unnecessary integral and derivative terms to vtolpathfollower 2014-08-15 21:00:48 +02:00
Corvus Corax
b1675a2804 OP-1156 added vtolpathfollower velocity limits to attitude control 2014-08-15 19:23:41 +02:00
Corvus Corax
b562fcb02e OP-1156 fix path logic to not deviate from correct altitude too much 2014-08-15 17:56:57 +02:00
Alessio Morale
5dbbda3adc Merge remote-tracking branch 'origin/amorale/OP-1404_ublox_pvt_support' into next 2014-08-13 15:27:10 +02:00
Alessio Morale
376aa0052f OP-1379 - Initial Notify module. Supports:
1) predefined seqences associated with each flightmode. 2) fixed table with alarm index and assciated led warn/error sequences/repetition rate.
2014-08-13 15:18:17 +02:00
Alessio Morale
f556a5e335 OP-1379 - Split simple notification and external lednotifications libraries 2014-08-13 15:14:55 +02:00
Corvus Corax
09e8b38407 OP-1156 fixed EmergencyFlyaway detection algorithm 2014-08-12 19:12:05 +02:00
Corvus Corax
56e4127bca OP-1156: add path_direction as a source for yaw as suggested by Werner :) 2014-08-12 18:18:07 +02:00
Corvus Corax
ea4e7962a6 OP-1156 fixed wrong callback ID assignment for pathfollower callback diagnostics 2014-08-10 21:17:55 +02:00
Corvus Corax
8944419b0f OP-1156 refactored pathfollower - new unified module as delayed callback - compiles but untested 2014-08-10 19:41:40 +02:00
Corvus Corax
a3d18bb578 Merge remote-tracking branch 'origin/D-Lite/PathFollowerImprovements' into corvuscorax/OP-1156_pathfollower-unification 2014-08-10 13:53:52 +02:00
Corvus Corax
ca1923f76f OP-1156: Added new (stub template) pathFollower Module as well as builkd environment changes to compile it instead of old pathfollowers 2014-08-10 12:50:38 +02:00
Stefan Karlsson
454d491e48 Merge branch 'next' into skarlsso/OP-1397_add_responsiveness_to_txpid
Conflicts:
	ground/openpilotgcs/src/plugins/config/configtxpidwidget.cpp
	ground/openpilotgcs/src/plugins/config/configtxpidwidget.h
2014-08-10 10:06:44 +02:00
Alessio Morale
1158c70a46 OP-1404 - minor cleanup, removed some duplicated code 2014-08-09 12:49:21 +02:00
Alessio Morale
2932045e3d OP-1404 Fix NMEA data parsing for GSV 2014-08-09 12:04:25 +02:00
Corvus Corax
c5fae5ee84 Merge branch 'next' into andrecillo/OP-1317_IMU_wind_estimation 2014-08-09 10:43:48 +02:00
Alessio Morale
a18009e875 OP-1429 Change datatype for elevation and azimuth respectively to int8 and int16. 2014-08-06 12:55:07 +02:00
Alessio Morale
d04d630273 OP-1404 fix include file path 2014-08-05 17:25:28 +02:00
Alessio Morale
23d2368984 OP-1404 Fix nav-pvt.pdop data type 2014-08-05 16:50:38 +02:00
Alessio Morale
ea63def1c8 OP-1404 fix compilation with PIOS_GPS_MINIMAL, fix some copy/pastem madness 2014-08-04 18:17:01 +02:00
Alessio Morale
240eb8e573 OP-1404 - Prevent mixing pvt and other sentence solution data. use PDOP from pvt 2014-08-04 17:56:28 +02:00
Alessio Morale
d3569927a0 OP-1404 fix unit scaling for pvt, use check_msgtracker, 2014-08-04 11:04:35 +02:00
Alessio Morale
6f4b1d5c03 OP-1404 uncrustify 2014-08-03 15:27:30 +02:00
Alessio Morale
c68dd3c00e OP-1404 - PVT will provide SOL+VELNED+POSLLH+Time. DOP will provide all dop values 2014-08-03 15:04:40 +02:00
Alessio Morale
1dd05c24cc OP-1404 - Fix compilation with PIOS_GPS_MINIMAL defined 2014-08-03 12:50:42 +02:00
Alessio Morale
0976fb6e1b OP-1404 - Add support for UBlox PVT sentence 2014-08-03 12:50:21 +02:00
Alessio Morale
016ba6940d OP-1403 - drop attitude/revolution as it has been supersede by StateEstimation module 2014-08-02 20:48:56 +02:00
Alessio Morale
d856bbdb50 OP-1403 - Update targets 2014-08-02 20:48:48 +02:00
Alessio Morale
57a43a5587 OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one 2014-08-02 20:48:34 +02:00
Stefan Karlsson
7f344da977 OP-1397 Round to instead of floor to uint8_t values in txpid.c 2014-08-01 14:51:39 +02:00
Stefan Karlsson
a7ee6fa764 OP-1397 Add initial support for rate mode response (deg/s) 2014-07-30 23:49:56 +02:00
Stefan Karlsson
2113e1a2e1 OP-1397 Add initial support for attitude mode response (deg) 2014-07-30 23:48:55 +02:00
Werner Backes
065ba1a0c8 Adds a 3D mode to path_vector. This allows vertical path segments without
position changes. PathStatus now also contains correction_direction and
path_direction to make path following behaviour more transparent.
2014-07-29 13:16:47 +02:00
Werner Backes
3e2961420d Add a 3D mode to path_endpoint. This allows FlyDirect waypoints to do
vertical movements without changing position.
2014-07-29 13:16:39 +02:00
Corvus Corax
5edb2dbae3 Merge branch 'andrecillo/OP-1317_IMU_wind_estimation' into corvuscorax/OP-1317_IMU_wind_estimation 2014-07-26 17:01:03 +02:00
Corvus Corax
5451003a58 Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation
Conflicts:
	flight/modules/Airspeed/airspeed.c
	flight/modules/Airspeed/gps_airspeed.c
2014-07-26 16:16:02 +02:00
Alessio Morale
e5b52d46d9 Merge remote-tracking branch 'origin/amorale/OP-1358_add_separate_rotation_calibration_offset_revo_only' into rel-14.06 2014-07-24 23:47:14 +02:00
Corvus Corax
a199fd1cb0 OP-1412 do not dicard mags after init 2014-07-23 22:40:43 +02:00
Andres
7f8e709e17 OP-1317 uncrustify 2014-07-23 08:04:52 +02:00
Andres
e195befc3a OP-1317 removed comments 2014-07-23 08:03:48 +02:00
Corvus Corax
95799cf11b OP-1412 delay ekf initialization until magnetometers are reporting valid data 2014-07-22 23:49:41 +02:00
Andres
ffabbc577c OP-1317 moved Butterworth filter code into flight/libraries/math/butterworth.* 2014-07-22 20:03:43 +02:00
Alessio Morale
9bee143476 OP-1358 Revo:Implement roll/pitch trim settings separated from "nominal" board rotation settings 2014-07-21 11:01:07 +02:00
Andres
df4d211f8b OP-1317 added a proper initialization of the Butterworth filter values 2014-07-20 16:22:27 +02:00
Andres
d7d20bb10f OP-1317 merge with branch corvuscorax/OP-1317_IMU_wind_estimation 2014-07-20 15:46:35 +02:00
Andres
ddde6d1f5e OP-1317 changed int into int32_t in function Quaternion2PY() 2014-07-20 15:26:05 +02:00
Alessio Morale
62755c4cab unrustify 2014-07-16 20:39:12 +02:00
Alessio Morale
25c54ac16d Merge remote-tracking branch 'origin/laurent/OP-1063_Multi_config_Hexa_fixes' into rel-14.06 2014-07-16 20:07:31 +02:00
Laurent Lalanne
1b447ee644 OP-1063 Multi_config_Hexa_fixes Stupid typo error with OctoX in VtolPathFollower. 2014-07-14 23:29:48 +02:00
Laurent Lalanne
c26e33964a OP-1063 Multi_config_Hexa_fixes Added OctoX, define new mixer table for Octo(p) and OctoX. New motor definition for OctoX (NNE, ENE...) Fixes for svg frames. Defined default settings for OctoP/X in setupwizard (but disabled) 2014-07-13 13:58:18 +02:00
Laurent Lalanne
a46480a99b OP-1063 Multi_config_Hexa_fixes : Added real HexaX, renamed HexaX > HexaH
Added artwork in config and wizard svg. Cleanup on svg connection diagram (layers)
DO NOT USE until mixers are fixed
2014-07-10 06:01:28 +02:00
rodneygrainger
3aaf1a3367 OP-1391 - Fix to prevent arming if unsafe due to current Thrust Mode (Altitude Hold/Vario) 2014-07-07 20:47:23 +12:00
Corvus Corax
80d3d7c954 OP-1374 hotfix to filtercf on checking of magnetometer calibration fabsf() 2014-06-29 18:36:46 +02:00
Alessio Morale
30491c7992 OP-1374 - Autostart the relevant PathFollower for known frame types 2014-06-29 17:23:57 +02:00
Alessio Morale
3ae85f6434 OP-1374 - Issue a Boot Alarm (reboot) if frame type is changed 2014-06-29 17:23:15 +02:00
Alessio Morale
1b823b7b92 Merge remote-tracking branch 'origin/Bertrand/OP-1308_Set_Same_Logic_To_Alarms' into next
Conflicts:
	flight/libraries/sanitycheck.c
	flight/modules/StateEstimation/filtermag.c
	flight/modules/System/systemmod.c
2014-06-26 20:31:27 +02:00
Alessio Morale
c6a773363f Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
Conflicts:
	flight/pios/common/pios_adxl345.c
	make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
a03ad41bab Merge branch 'amorale/OP-1365_pios_instrumentation' into next
Conflicts:
	flight/modules/Attitude/attitude.c
2014-06-22 19:13:46 +02:00
Alessio Morale
263fd64ab5 Merge branch 'amorale/OP-1274_freertos_v8.0.0' into next 2014-06-22 16:06:21 +02:00
Alessio Morale
f30dd414ac Merge branch 'amorale/OP-1227_cc_high_cpu_utilization' into next 2014-06-22 16:06:08 +02:00
Corvus Corax
3f11f4f6b2 OP-1371 fix for hitl: turn of receiver alarm if in gcs control mode (but set warning) 2014-06-18 22:46:44 +02:00
Corvus Corax
7898d507ca drive-by bugfix in #ifdefed code affecting simposix 2014-06-18 20:41:58 +02:00
Corvus Corax
7933f2154c OP-1317 - project 3d airspeed vector unto fuselage vector to get scalar airspeed estimate 2014-06-18 12:44:10 +02:00
Alessio Morale
eb5deb3eca OP-1274 Remove unneeded cast from task name in xTaskCreate call 2014-06-18 01:47:43 +02:00
Corvus Corax
3d9f1ca93a OP-1317 changed imu wind estimation to actually estimate wind (and lowpass filter it) 2014-06-17 18:51:26 +02:00
Corvus Corax
205edac762 Merge branch 'next' into corvuscorax/OP-1317_IMU_wind_estimation 2014-06-17 18:14:27 +02:00
Alessio Morale
6226aec2a7 OP-943 uses pios_mem API for heap allocation 2014-06-11 22:15:40 +02:00
Alessio Morale
16cb081f5c OP-1365 Flight code instrumentation API: Sample use of instrumentation in Atittude module.
When instrumentation is enabled at board level (pios_board.h, enable PIOS_INCLUDE_INSTRUMENTATION) PIOS_INSTRUMENT_MODULE setups the module to be instrumented.
2014-06-10 21:38:12 +02:00
Alessio Morale
8710ff4070 OP-1227 Fix high CPU usage: Some minor to Actuator module. 2014-06-08 22:39:16 +02:00
Alessio Morale
52c1d69c19 OP-1227 Fix high CPU usage: Change gyro oversampling to 46 (400Hz update rate) to lessen the cpu load and jitter due accel rate mismatch 2014-06-08 22:14:06 +02:00
Alessio Morale
843987484b OP-1227 Fix high CPU usage: Avoid several float division in Attitude module, change optimization for attitude estimation function 2014-06-08 21:48:35 +02:00
Alessio Morale
d51b7ce2d4 OP-1227 Fix high CPU usage: Changes to attitude module:
- changed Expected rate to 500 (it was erroneously defined as 666Hz)
- use the optimized api to fetch accel samples
2014-06-08 21:47:00 +02:00
Alessio Morale
11d0bbf5f8 OP-1365 Flight code instrumentation API: Use systemMod to publish counters 2014-06-07 17:43:36 +02:00
Corvus Corax
de7e0d0781 OP-1287 added handler definitions for new flightmodes 2014-06-04 10:29:45 +02:00
Corvus Corax
07667027ee OP-1287 added autocruise mode too to manualcontrol 2014-06-04 10:23:59 +02:00
Corvus Corax
ec5052bdba OP-1287 added new flightmodes to manualcontrol.c 2014-06-04 10:04:40 +02:00
Corvus Corax
f0c4b8f9c7 OP-1287 renamed VELOCITYCONTROL back to AltitudeVario for consistency 2014-06-03 18:42:54 +02:00
Corvus Corax
5bfb57e081 Merge branch 'next' into amorale/OP-1355_fix_mag_board_rotation_issue 2014-05-26 17:19:56 +02:00
Corvus Corax
c6e168c972 Merge branch 'next' into corvuscorax/OP-1352_Headwind-improvements 2014-05-26 17:17:43 +02:00
Corvus Corax
bf16738fd3 Merge branch 'next' into amorale/OP-1350_takeoff_location_handling 2014-05-26 17:16:47 +02:00
Corvus Corax
76f83fc131 OP-1352 some cosmetic cleanups, explicitly marked float constants as type float 2014-05-25 13:27:38 +02:00
Alessio Morale
3d67b7567e OP-1355 Fix Mag scaling being calculated after applying board rotation. 2014-05-25 11:28:43 +02:00
Andres
642f740be3 OP-1317 Bettered jump treatment in yaw calculation and some cosmetics 2014-05-24 10:04:39 +02:00
Andres
9e80c4da9c OP-1317 Low-pass filter parameters added to airpeedSettings: IMUBasedEstimationLowPassPeriod1 pre-filter period in seconds, IMUBasedEstimationLowPassPeriod2 filter period in seconds. Oscillations with shorter periods than these, are filtered. If airspeed has too much noise increase IMUBasedEstimationLowPassPeriod2, else if it is too smooth descrease it. 2014-05-23 11:55:06 +02:00
Andres
822b067d98 OP-1317 Corrected error in calculation of low pass filter cut-off frequencies 2014-05-23 07:37:57 +02:00
Andres
f273abf6c8 OP-1317 Merged with next 2014-05-22 17:01:38 +02:00
Andres
a83379425c OP-1317 Small optimizations of code, delete of debug variables in airspeed object and uncrustify 2014-05-22 10:00:50 +02:00
Andres
423645392b OP-1317 Changed filtering method of IMU airspeed calculation into a Butterworth second order filter 2014-05-21 19:32:02 +02:00
Andres
41dd85b741 OP-1317 Changed filtering method of IMU airspeed calculation into a Butterworth second order filter 2014-05-21 19:25:27 +02:00
Alessio Morale
92bf876654 OP-1350 refactor into a plans library all functions dealing with initialization and execution of PathFollower/pathplanner commands for manualcontrol 2014-05-19 18:35:18 +02:00
Alessio Morale
3ec8c18fad OP-1274 fixes for RevoProto 2014-05-18 22:56:54 +02:00
Alessio Morale
99540d5db5 OP-1274 fixes for OSD 2014-05-18 22:56:51 +02:00
Alessio Morale
36e304f579 OP-1274 fixes for revolution 2014-05-18 22:56:48 +02:00
Alessio Morale
e9fff2b6fa OP-1274 fixes for OPLink 2014-05-18 22:56:44 +02:00
Alessio Morale
be5cc66bd3 OP-1274 fixes for Coptercontrol firmware 2014-05-18 22:56:29 +02:00
Alessio Morale
d88d73e7fe OP-1350 Make RTB safer pick the lowest between PositionState.Down and TakeOffLocation.Down. 2014-05-18 14:41:45 +02:00
Corvus Corax
5153806289 OP-1352 cleaned up some code comments 2014-05-17 23:27:30 +02:00
Corvus Corax
5544e9c984 OP-1352 redesigned course calculation to take complete wind vector into account 2014-05-17 22:02:04 +02:00
Corvus Corax
2357ee1774 hotfix: allow arming in Stabilized 4,5,6 2014-05-16 23:39:36 +02:00
Alessio Morale
2048440053 OP-1350 fix a review defect(a set intead of TakeOffLocationStatusGetget). Check if status is valid beside locationSet 2014-05-16 23:32:11 +02:00
Alessio Morale
f3df459278 OP-1350 remove checks for valid TakeOffLocation. It is already handled in takeoffLocationHandler 2014-05-16 21:56:44 +02:00
Alessio Morale
ffa5e66d8b OP-1350 fix a bug that overwrite TakeOffLocation when changing mode to preset after an arming sequence. cleanup and get rid of "pending" status 2014-05-16 21:53:05 +02:00
Corvus Corax
9306cbc7c5 OP-1352 Headwind-improvements for FixedWingPathFollower 2014-05-16 20:20:40 +02:00
Alessio Morale
80bd04075f OP-1350 Rename ReturnToHomeAltitudeOffset to ReturnToBaseAltitudeOffset 2014-05-16 18:51:04 +02:00
Alessio Morale
edba1bc71d OP-1350 split Init function out of Handler, added missing UAVO initalize, cleanup code 2014-05-16 18:31:49 +02:00
Alessio Morale
8dcee11cb8 OP-1350 change destination for ReturnToBase to takeoffLocation 2014-05-16 12:38:18 +02:00
Alessio Morale
063ae8afe0 OP-1350 add a TakeOffLocation Handler to manualcontrol 2014-05-16 02:28:12 +02:00
Alessio Morale
e082fbc04e Merge remote-tracking branch 'origin/amorale/OP-1330_cannot_set_homelocation.set_false' into next 2014-05-15 20:30:32 +02:00
Alessio Morale
7182fe0194 Merge remote-tracking branch 'origin/amorale/OP-1329_airspeed_fixes' into next 2014-05-15 20:30:10 +02:00
Corvus Corax
065a632123 Merge branch 'corvuscorax/OP-1325_Event-System-Error-Alarm' into next 2014-05-15 00:13:20 +02:00
Alessio Morale
47976312c2 OP-1330 reset Home Set delay timer if Set==true 2014-05-12 22:56:28 +02:00
Alessio Morale
953b7cc2a7 OP-1330 Fix a compilation issue with CC/CC3D 2014-05-11 12:37:20 +02:00
Alessio Morale
3c5a41049b Merge branch 'amorale/OP-1302_updated_led_behaviour' into next 2014-05-11 12:01:53 +02:00
Alessio Morale
45efaffcf1 OP-1330 fix namings/uncrustify 2014-05-11 11:38:08 +02:00
Alessio Morale
7155805b79 OP-1329 Move gps airspeed initialization checks under "sensor changed" test 2014-05-11 11:33:11 +02:00
Andres
530c0aa967 OP-1317 Added two file (actually renames) 2014-05-10 14:51:22 +02:00
Andres
02e62f91ed OP-1317 Apadted airspeed calculation from ground speed and orientattion changes: applied extended IMU wind estimation, filtering takes place now with Holt-Winters double exponential smoothing on orientation vector and speed vector, matrix calculation replaced by a direct calculation of the fuselage vector, renamed gps_airspeed into imu_airspeed because estimation relies on imu results and a n estimate of ground speed and not directly a GPS signal 2014-05-10 14:50:24 +02:00
Corvus Corax
47a891e594 OP-1325 fix event system warnings to be errors 2014-05-08 23:05:55 +02:00
Bertrand Oresve
743cf4e4b5 OP-1308 Merge with next (conflict with stabilization) 2014-05-08 22:33:45 +02:00
Alessio Morale
e5d6726bb6 Merge remote-tracking branch 'origin/next' into amorale/OP-1302_updated_led_behaviour 2014-05-08 22:27:08 +02:00
Bertrand Oresve
fd1b786868 Merge branch 'next'
Conflicts:
	flight/libraries/sanitycheck.c
	flight/modules/Stabilization/stabilization.c
2014-05-08 21:36:54 +02:00
Alessio Morale
3a451c9737 OP-1329 Trigger a SensorType change the first time Task runs to set AirspeedSensor UAVO when sensor is None 2014-05-08 19:58:42 +02:00
Alessio Morale
08dcdefc1f OP-1329 set SensorConnected to false when sensorType is changed to none. 2014-05-08 19:48:30 +02:00
Corvus Corax
1add404d80 OP-1161 reimplemented magnetometer plausibikity check using vector
length only
2014-05-07 23:47:14 +02:00
Alessio Morale
516f359645 OP-1329 fix a cherry-pick issue 2014-05-07 23:23:51 +02:00
Corvus Corax
2da1f2aa09 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1161_magnetometer-alarm 2014-05-07 22:26:20 +02:00
Corvus Corax
153d2fb786 OP-1309 Fixed bug in Quaternion Stabilization Error Calculation in regards to independent axis 2014-05-07 22:12:01 +02:00
Alessio Morale
8462adb579 OP-1330 Delay SetHomeLocation call from GPS module to be able to save HomeLocation.Set=false 2014-05-07 20:43:34 +02:00
Alessio Morale
7645209809 OP-1329 Various fixes to airspeed:
- Prevent Airspeed module with Sensor=none from constantly running and updating AirspeedSensor
- Do not call gps_airspeedInitialize if not needed
2014-05-07 20:38:24 +02:00
Corvus Corax
5528d79a05 OP-1309 bugfix update - correct initial loading of StabBank 2014-05-07 18:23:56 +02:00
Corvus Corax
56b5747b4e uncrustify 2014-05-06 18:53:57 +02:00
Corvus Corax
a2ae0601bb Merge remote-tracking branch 'origin/amorale/OP-975_calibration_process_changes' into corvuscorax/OP-1161_magnetometer-alarm 2014-05-06 18:51:46 +02:00
Corvus Corax
14652440a2 OP-1161 skip magnetometer entirelly if complementary (no mag) mode, thus not triggering magnetometer alarms 2014-05-06 18:46:58 +02:00
Corvus Corax
2bd7609de9 Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm
Conflicts:
	ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
2014-05-06 17:30:00 +02:00
Corvus Corax
e6875a7e13 Merge branch 'corvuscorax/OP-1259_Cruise_Control_Tweaks' into next 2014-05-06 16:32:27 +02:00
Bertrand Oresve
b2ebb1faf8 OP-1308 merging filterlaltitude with OP-1235 2014-05-05 21:33:57 +02:00
Corvus Corax
08a627db6f Merge remote-tracking branch 'origin/Bertrand/OP-1314_Fix_Airspeed_Stack_Size' into next 2014-05-04 12:34:07 +02:00
Corvus Corax
4d9de8f56b Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 12:18:47 +02:00
Corvus Corax
d3bf817434 OP-1309 fix typo in stabilizedhandler (manualcontrol) for stabi flightmode 4-6 2014-05-04 12:17:34 +02:00
Corvus Corax
2b00cb31a4 Merge branch 'next' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 12:12:51 +02:00
Corvus Corax
64d18c1a31 Merge branch 'corvuscorax/OP-1316_fix-gravity-constants' into next 2014-05-04 12:07:22 +02:00
Corvus Corax
aee6a3b85b Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 12:04:43 +02:00
Corvus Corax
fb41258e57 OP-1309 fixed missing assignment in manualcontrol FM switch 2014-05-04 12:03:56 +02:00
Corvus Corax
6b25c06a03 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 11:39:34 +02:00
Corvus Corax
942b53a66b OP-1309 removed unnecessary NUMELEM run time check from sanitychecks and put it into manualcontrol.h as a compile time static assert 2014-05-04 11:38:10 +02:00
Corvus Corax
23654cf565 Merge branch 'next' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-04 11:21:52 +02:00
Corvus Corax
8ec8c4e235 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-03 18:40:10 +02:00
Corvus Corax
0509595137 OP-1309 present for Laurent: 3 more Stabilized modes (and a bit of cleanup) 2014-05-03 18:38:45 +02:00
Corvus Corax
0d070a5857 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-03 17:27:17 +02:00
Corvus Corax
69b5f41e58 OP-1309 correctly set StabilizationMode.Thrust in all other modules that set StabilizationDesired (Autotune,Pathfollowers) 2014-05-03 17:25:53 +02:00
Corvus Corax
e6a69c2f78 Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks 2014-05-03 15:59:03 +02:00
Corvus Corax
e95b25dca8 OP-1309 fixed missing thrust mode assignment in manualcontrol 2014-05-03 15:57:00 +02:00
Corvus Corax
c63540b2ec Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks
Conflicts:
	flight/modules/Stabilization/stabilization.c
	shared/uavobjectdefinition/stabilizationsettings.xml
2014-05-02 18:25:57 +02:00
Corvus Corax
f7a2e31809 Merge branch 'next' into theothercliff/OP-1259_Cruise_Control_Tweaks
Conflicts:
	flight/pios/stm32f10x/inc/usb_conf.h
2014-05-01 22:58:10 +02:00
Corvus Corax
2247fd69ec OP-1309 fixed bug in outerloop 2014-05-01 18:52:39 +02:00
Corvus Corax
944f3f5d2f OP-1309 provide faster GyroState updates for more prompt response and less stabilization lag 2014-05-01 17:46:13 +02:00
Corvus Corax
936a52112a OP-1309 changed behaviour of Rattitude again to mimick old one 2014-05-01 17:08:43 +02:00
Corvus Corax
7275d9a807 OP-1309 correctly limit the maximum attitude-loop-rate in rattitude mode 2014-05-01 16:37:22 +02:00
Corvus Corax
0ea1ccf5c3 OP-1316 fix gravity constants 2014-05-01 15:50:02 +02:00
Corvus Corax
09a5578f5a OP-1309 put altitude calls into #ifdef so it compiles on coptercontrol 2014-05-01 12:54:56 +02:00
Corvus Corax
6993570cc9 OP-1309 integrated AltitudeHold into new Stabilization 2014-05-01 11:48:38 +02:00
Andres
0973f1037f OP-1315 (re)added IS_REAL check for CalibratedAirspeed and for new calculated airspeed 2014-05-01 10:40:33 +02:00
Corvus Corax
b6b03b767a Merge branch 'next' into corvuscorax/OP-1161_magnetometer-alarm
Conflicts:
	shared/uavobjectdefinition/revosettings.xml
	shared/uavobjectdefinition/systemalarms.xml
2014-05-01 10:26:53 +02:00
Corvus Corax
3ada1da71a uncrustify 2014-04-30 22:20:07 +02:00
Andres
49870ce7dc OP-1315 uncrustify 2014-04-30 18:45:04 +02:00
Andres
0d6e8c8efb OP-1315 changed error alarm in gps_airspeedGet for |v|<1 into a warning to allow arming. cos(5deg) exchanged by a constant expression. pow (x,2.0f) exchanged by a inline function based on multiplication. Deleted arispeedalarm.h and airspeedalarm.c and exchanged AirspeedAlarm() by a direct call to AlarmsSet(). 2014-04-30 18:39:35 +02:00
Bertrand Oresve
70ba6850d0 OP-1308 Uncrustify operation 2014-04-30 08:49:50 +02:00
Cliff Geerdes
b7a2931f21 OP-1259 Change a constant from a testing value to release value 2014-04-29 20:46:57 -04:00
Cliff Geerdes
5ee2930181 OP-1259 Removed inverted flight pitch and yaw reverse option 2014-04-29 20:24:49 -04:00
Bertrand Oresve
6d3ade4947 OP-1308 Set the same logic for alarms 2014-04-29 22:25:49 +02:00
Corvus Corax
59bdab697a OP-1309 some CPU and memory optimizations to get it to run on CC 2014-04-29 18:17:29 +02:00
Corvus Corax
1632eeb58f OP-1309 some small fixes to Stabilization as result of simulator testing 2014-04-29 15:51:56 +02:00
Corvus Corax
a9a2c6f769 OP-1309 Reimplemented alarm handling and stabilization watchdog - Stabilization refactoring nearly done. needs testing and AltitudeHold reimplementations 2014-04-29 01:06:51 +02:00
Corvus Corax
82d2c5a308 OP-1309 Implemented control of new stabilization framework (replaces old stabilization module) 2014-04-29 00:29:15 +02:00
Bertrand Oresve
333ccc7e42 OP-1314 Fix the Airspeed stack size 2014-04-27 22:42:54 +02:00
Corvus Corax
93f82652b7 OP-1309 outer loop fully implemented - some cleanups and changes in control flow to accomodate new logic 2014-04-27 15:15:59 +02:00
Corvus Corax
844fcffec7 OP-1309 added cruisecontrol function library and outer loop template 2014-04-27 07:19:59 +02:00
Alessio Morale
001ee66b06 Merge remote-tracking branch 'origin/amorale/OP-1235_fix_altitude_estimation' into next 2014-04-26 23:03:48 +02:00
Corvus Corax
3f7c9e3679 OP-1309 inner stabilization loop in new incarnation - is not used yet until outer loop rewritten as well 2014-04-26 22:37:49 +02:00
Alessio Morale
d42debba50 OP-1302 Remove the special case for Telemetry in Alarm.c and shut up the telemetry warning in telemetry.c when disconnected 2014-04-26 20:48:30 +02:00
Corvus Corax
77f2444fa4 OP-1309 renamed stabilization mode NONE to MANUAL 2014-04-26 20:33:25 +02:00
Corvus Corax
e9d1a2af4b OP-1309 get rid of this horrible bound() function code duplication throughout entire flight code and put it into libraries/math 2014-04-26 17:48:54 +02:00
Corvus Corax
599661ba18 OP-1309 UAVObject changes, GCS changes and Makefile changes needed for Stabi refactoring 2014-04-26 15:14:40 +02:00
Alessio Morale
f01cf66095 Merge remote-tracking branch 'origin/andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements' into next
Conflicts:
	ground/openpilotgcs/src/plugins/systemhealth/systemhealthgadgetwidget.cpp
2014-04-15 21:52:34 +02:00
Alessio Morale
eb1b27b2e4 Merge remote-tracking branch 'origin/Bertrand/OP-1288_Remove_PositionSource_from_VtolPathFollowerSettings' into next 2014-04-15 21:47:37 +02:00
Alessio Morale
82139a6e44 Merge remote-tracking branch 'origin/amorale/OP-1294_fix_stacks_heap_cc' into next 2014-04-15 21:46:26 +02:00
Alessio Morale
cbbb9ea9f7 Merge remote-tracking branch 'origin/Bertrand/OP-1056_Fix_TIMEUTC_valid_flags' into next 2014-04-15 21:45:07 +02:00
Alessio Morale
f9aa020de4 Merge remote-tracking branch 'origin/andrecillo/OP-1299_Autodetect_nbcells_battery' into next 2014-04-15 21:44:06 +02:00
Alessio Morale
5763ed3d8d OP-1235 make Initialization Acceldrift KI configurable 2014-04-14 10:58:46 +02:00
Alessio Morale
20508314f2 OP-1302 use pios_notify api to alert user of ongoing CF gyro calibration 2014-04-13 17:56:20 +02:00
Alessio Morale
299f388245 OP-1302 Add a stub pios_notify API for user interaction/notifications
right now all notifications produces the same output, the DRAW_ATTENTION sequence
2014-04-13 17:42:57 +02:00
Andres
adcd606e16 OP-1299 uncrustify. 2014-04-13 14:08:34 +02:00
Andres
944e39db07 OP-1299 Small changes proposed in review process. 2014-04-13 14:07:16 +02:00
Alessio Morale
5d637fab87 OP-1302 move stuffs away from systemmod 2014-04-13 11:54:25 +02:00
Alessio Morale
82c81fef6e OP-1302 make leds more "readable"
Show alarm and arming/flightmode in sequence
Alarm:
Warning = rP
Error = rrP
Critical = R

Heartbeat/flightmode:
disarmed = B
armed/Stabilization1 = bbP
armed/Stabilization2 = bbbP
armed/Stabilization3 = bbbbP
armed/AH/AVario/Velocitycontrol = bvP
armed/PH/Pathplanner/POI = bbvP
armed/Land/RTB = bbvvP

note:
r/b/v = short red/blue/both blink
R/B/V = long red/blue/both blink
p/P = short/long pause
2014-04-12 22:00:02 +02:00
Bertrand Oresve
80d7363dfa OP-1056 Fix the TIMEUTC valid flags (with Werner suggestion) 2014-04-12 11:48:18 +02:00
Bertrand Oresve
d70d8df272 OP-1056 Fix the TIMEUTC valid flags in GPS UBX protocol 2014-04-12 09:24:08 +02:00
Corvus Corax
661bea2372 OP-1296 - some explicit const declarations in stateestimation 2014-04-10 20:17:01 +02:00
Andres
598a48a2d9 OP-1299 Added autodetect battery cell number before arming. Tested for LiPo from 2S to 6S. Over 6S counting is not possible for LiPo. Should work for LiCo too. LiFePo works only for 1S or 2S. I was not able to find values for LiFeSO4. FlightBatteryState has now two new fields: NbCells and NbCellsAutodetected, which register the autodetection. FlightBatteryState.NbCells should be used instead of FlightBatterySettings.NbCells now, when the number of cells in needed. FlightBatterySettings.NbCells is used by the user to prescribe a cell number or if equal to zero to ask for autodetection. 2014-04-10 17:28:48 +02:00
Alessio Morale
1fe591d51e OP-975 change BoardRotation data type to float so it can be used for level calibration 2014-04-10 01:47:37 +02:00
Alessio Morale
8eeb3217bf OP-975/OP-1068 replace simple scaling with a calibration matrix for magnetometer correction 2014-04-08 21:22:09 +02:00
Alessio Morale
4764186a5f OP-1235 cleanup "magic numbers" 2014-04-08 20:51:16 +02:00
Corvus Corax
cb16cf04e1 Merge branch next into 'corvuscorax/OP-1296_barometer-initialization-fix' 2014-04-08 19:26:43 +02:00
Corvus Corax
011c598793 OP-1296 only use GPS in filterchains when explicitly requested
disallow arming when GPS is needed for initialization until lock is acquired
2014-04-08 18:31:11 +02:00
Alessio Morale
6d1fabdd5f OP-1294 declare controlHandler as const, add a new PIOS_EXCLUDE_ADVANCED_FEATURES that disables all nav features 2014-04-08 00:30:10 +02:00
Alessio Morale
492275bf0e OP-1294 Fix undeclared STACK_SIZE_BYTES for revo 2014-04-06 19:26:48 +02:00
Alessio Morale
eed5c098ab OP-1294 Allow to specify different stack sizes for rx and tx telemetry task. 2014-04-06 19:19:44 +02:00
Corvus Corax
9a52f506ef drive-by bugfix in Fixedwingpathfollower 2014-04-06 15:38:22 +02:00
Corvus Corax
5b6d397f76 OP-1290 uncommented accidentally commented lines 2014-04-05 13:00:21 +02:00
Corvus Corax
bb91039f51 OP-1290 fixes in telemetry (and pios_board initialization) 2014-04-05 12:53:31 +02:00
Bertrand Oresve
654d842c22 OP-1288 Remove PositionSource from VtolPathFollowerSettings 2014-04-05 12:12:48 +02:00
Alessio Morale
8bb1d0148c Uncrustify 2014-04-01 22:58:23 +02:00
Alessio Morale
6540c69698 Merge remote-tracking branch 'origin/andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into next 2014-04-01 22:05:12 +02:00
Alessio Morale
3ebc17e7d7 Merge remote-tracking branch 'origin/sparkie79/OP-1266_negative-thermal-compensation-coeff' into next 2014-04-01 21:58:06 +02:00
Alessio Morale
fe985d2326 Merge remote-tracking branch 'origin/laurent/OP-1241_TxPID_Bank3' into next 2014-04-01 21:34:18 +02:00
Alessio Morale
18be34db05 Merge remote-tracking branch 'origin/filnet/OP-1246_RadioComBridge_bugs' into next 2014-04-01 21:31:32 +02:00
Andres
fd5d1e42a3 OP-1273 OP-1282 OP-1283 corrected compilation error for fw_revoproto 2014-04-01 07:46:50 +02:00
Andres
5ed417323e OP-1273 OP-1282 OP-1283 bug fixes on I2C library: check for intialization and hot-plug robustness 2014-03-31 22:16:29 +02:00
Andres
a08b7ad21c OP-1273 OP-1282 OP-1283 uncrustify 2014-03-28 17:11:55 +01:00
Andres
7067f4f8ff Merge branch 'andrecillo/OP-1283_SystemHealthGadgetWidget_updateAlarms_coordinate_calculation_correction' into andrecillo/OP-1273_OP-1282_OP-1283_Diverse_Airspeedsensor_improvements
Merged correction on coordinate calculation in SystemHealth gadget for correct display of Airspeed-Alarm
2014-03-28 17:01:44 +01:00
Andres
e014a61fcc OP-1273 OP-1282 OP-1283 diverse improvements in airspeed sensor handling including implementation of PixHaw sensor, airspeedalarm in Systemhealth and in all airspeed sensors; file added 2014-03-28 17:00:42 +01:00
Andres
9a207fbb80 OP-1273 OP-1282 OP-1283 diverse improvements in airspeed sensor handling including implementation of PixHaw sensor, airspeedalarm in Systemhealth and in all airspeed sensors; file changes 2014-03-28 16:59:52 +01:00
Andres
ef78320112 Merge branch 'andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO' into andrecillo/OP-1282_Eagletree_airspeed_sensor_I2C_alarms
Merged because both senosors should use the Airpeed alarm and andrecillo/OP-1282_Eagletree_airspeed_sensor_I2C_alarms is based on functionality implemented in andrecillo/OP-1273_PixHawk_airspeed_sensor_MS4525DO
2014-03-28 14:54:27 +01:00
Andres
7ec855af5f OP-1273 added and implemented Airpeed alarm for the PixHawk sensor 2014-03-28 14:18:14 +01:00
Corvus Corax
fe04cf7d29 uncrustification 2014-03-27 21:19:03 +01:00
Corvus Corax
7bd7c20fd9 Merge remote-tracking branch 'origin/Bertrand/OP-1267_Update_HomeLocation_In_LLA_Filter' into next 2014-03-27 21:17:42 +01:00
Andres
4188b492fc OP-1273 added I2C warning alarm during calibration of zero point, and uncrustify 2014-03-27 16:59:48 +01:00
Andres
af86a3eb37 OP-1282 Added I2C alarm in baro_airspeedGetETASV3 and did uncrustify 2014-03-27 16:49:57 +01:00
Andres
c5dc556a43 OP-1273 Uncrustify 2014-03-27 16:19:22 +01:00
Andres
8e26338f24 OP-1273 I2C Alarm reset to default when AirspeedSensorType is changed. Small cosmetic corrections 2014-03-27 09:32:17 +01:00
Cliff Geerdes
48345f0194 OP-1259 First tested version 2014-03-27 01:37:56 -04:00
Cliff Geerdes
45fa3220a5 Merge branch 'next' into theothercliff/OP-1259_Cruise_Control_Tweaks 2014-03-26 13:49:17 -04:00
Cliff Geerdes
81f31e64a9 OP-1259 WIP to merge next in locally 2014-03-26 13:48:24 -04:00
Cliff Geerdes
d38360b665 OP-1259 small code beautification 2014-03-26 13:35:04 -04:00
Cliff Geerdes
eaa58fd1dc Merge branch 'theothercliff/OP-1260_Rattitude_Tweaks' into next 2014-03-26 12:22:17 -04:00
Andres
9d30673d18 OP-1273 attitude estimation uses airspeedSensor.TrueAirspeed when available (e.g. from MS4525DO; available when TrueAirspeed >=0 ) instead of using an altitude correction IAS2TAS(alt). When not available it falls back to IAS2TAS(alt) 2014-03-26 09:15:56 +01:00
Bertrand Oresve
199193aa3f OP-1267 Fix UAV position after a HomeLocation Update (adding #define to be clearer) 2014-03-25 21:00:10 +01:00
Andrés Chavarría Krauser
4dff86dc9c OP-1273 New files for the MS4525DO PixHawk speed sensor: PIOS files and module files 2014-03-25 10:37:10 +01:00
Andrés Chavarría Krauser
f8f53d8801 OP-1273 Adaptations to include MS4525DO PixHawk speed sensor 2014-03-25 09:18:25 +01:00
Cliff Geerdes
d36cfe28ed OP-1260 finish renaming RattitudeModeTransition I don't know how it built before. 2014-03-23 19:04:17 -04:00
Cosimo Corrado
fc30ababf0 use fabsf instead abs 2014-03-23 22:07:09 +01:00
Cliff Geerdes
5ecea4bf33 OP-1260 fix misspelling of RattitudeModeTransition 2014-03-23 13:00:00 -04:00
Alessio Morale
abd7da20df Merge branch 'amorale/OP-1026_cpu_idle' into next 2014-03-23 15:32:19 +01:00
Bertrand Oresve
10dec58a10 OP-1267 Fix UAV position after a HomeLocation Update 2014-03-23 12:56:01 +01:00
Cliff Geerdes
6d7d10caba OP-1259 PowerDelayComp addtl inverted modes 2014-03-22 01:18:06 -04:00
Cliff Geerdes
820e8dfa3e OP-1260 use predefined macro for size of Flight Mode Switch 2014-03-21 22:34:03 -04:00
Cosimo Corrado
739aefd53b OP-1266 Fix checking for temperature compensation coeffs 2014-03-20 22:36:09 +01:00
Cliff Geerdes
945b60cf99 OP-1260 Fixed typo in a fairly important comment 2014-03-20 12:41:48 -04:00
Cliff Geerdes
1cb9d9548f OP-1160 limit values in flight code (not just GCS) to avoid DZ. Set GCS tab index back to 0. 2014-03-17 22:40:19 -04:00
Cliff Geerdes
390533f2e3 OP-1160 Oops, forgot to remove #if 0's after testing 2014-03-14 02:14:02 -04:00
Cliff Geerdes
297b0d01cb OP-1260 remove anti-windup, 2 PIDs, mode transition 2014-03-14 01:47:37 -04:00
Alessio Morale
8218becdac uncrustify 2014-03-09 16:43:31 +01:00
Alessio Morale
0f2d65a8e4 Merge branch 'amorale/OP-974_make_bl_info_available_to_fw' into next 2014-03-09 16:17:34 +01:00
Alessio Morale
f9abb1d8c1 Merge branch 'amorale/OP-1232_eventsys_warn_on_high_telem_update_rate' into next 2014-03-09 16:14:03 +01:00
Alessio Morale
e407eb8126 Merge branch 'next' of git://git.openpilot.org/OpenPilot into next 2014-03-09 14:38:17 +01:00
Alessio Morale
0b30b79c98 Merge remote-tracking branch 'origin/amorale/OP-1149_gyro_accel_thermal_calibration' into next
Conflicts:
	ground/openpilotgcs/src/libs/eigen/Eigen/src/Core/util/Memory.h
	ground/openpilotgcs/src/plugins/config/revosensors.ui
	ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
2014-03-09 14:38:08 +01:00
Corvus Corax
0ece1a1fb3 OP-1216 removed "reverseThrottle" systemsetting and have reversethrottle implicitly allowed for REVERSABLEMOTOR type outputs 2014-03-09 10:00:58 +01:00
Corvus Corax
148b453aad OP-1216 added new mixer output type "reversable motor" to have engines which can can backwards go to a safe level when disarmed 2014-03-09 01:37:22 +01:00
Laurent Lalanne
aa7a8f62c7 OP-1241 TxPID Does not work for Bank 3 PID settings (Typo) 2014-03-07 22:04:14 +01:00
Philippe Renon
7ab38eacb6 OP-1246 removed now uneeded FIXME tag in RadioComBridge 2014-03-04 10:02:43 +01:00
Philippe Renon
067cb6f098 OP-1246 made updating of RadioComBridgeStats thread safe 2014-03-04 09:56:42 +01:00
Philippe Renon
29198e17cf OP-1246 fixed wrong logic for telemtryTxRetries and radioTxRetries : was wrongly accumulated 2014-03-04 09:51:45 +01:00
Philippe Renon
1e3e8a29a9 OP-1246 fixed clumsy error handling of UAVTalkSendObject calls from RadioComBridge 2014-03-04 09:49:34 +01:00
Corvus Corax
dbbb8d5e0d OP-1216 fixes as suggested in OPReview-645 2014-03-03 18:58:09 +01:00
Corvus Corax
2c99b008c6 OP-1216 some fixes to flightmode and arm state management, update GCS control widget to be able to test and debug new control infrastructure 2014-03-02 22:20:18 +01:00
Corvus Corax
12eed41e58 OP-1216 modified alarms for manualcontrol/receiver to reflect new architecture 2014-03-02 20:12:19 +01:00
Corvus Corax
564a991222 adjusted Stabilization stack size to get rid of stack alarm 2014-03-02 19:11:49 +01:00
Corvus Corax
2f57ea2ab3 added missing initializations to allow boot without manualcontrol module 2014-03-02 19:00:37 +01:00
Corvus Corax
f61231f610 OP-1216 moved safety zeroing for channels from Stabilization to Actuators (so it also affects manual mode) 2014-03-02 15:35:39 +01:00
Corvus Corax
3ea9042279 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-03-02 14:54:01 +01:00
Corvus Corax
cdca8d835c OP-1216 manualcontrol refactoring 2014-03-02 14:45:17 +01:00
Alessio Morale
7f6175d817 OP-1235 allows AccelBiasValue to quickly reach the target value at initialization 2014-02-23 13:05:20 +01:00
Alessio Morale
a2386f548b OP-1235 allow for live update of altitude estimation settings 2014-02-23 13:05:20 +01:00
Alessio Morale
bc3636bbd6 OP-1235 gives better names to state variables
Conflicts:
	flight/modules/StateEstimation/filteraltitude.c
2014-02-23 13:05:20 +01:00
Alessio Morale
2bcbf7dc86 OP-1026 remove legacy idle time calculation in OPLink code 2014-02-22 00:31:06 +01:00
Alessio Morale
3fc3b5b01b OP-1026 replace idle time calculation with task monitor API 2014-02-22 00:30:03 +01:00
Alessio Morale
3cf1662bc8 Merge remote-tracking branch 'origin/amorale/OP-1212_telemetry_prio_queue' into next 2014-02-21 19:16:52 +01:00
Alessio Morale
b879bd8fb4 OP-1232 set lowpriority field on all other UAVObjEvent usage intances 2014-02-18 01:04:43 +01:00
Alessio Morale
26f3422612 OP-1232 add a low priority flag that prevent raising the error counter in eventdispatcher, to be used for telemetry 2014-02-18 01:03:57 +01:00
Corvus Corax
e97ce303b8 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into next 2014-02-18 00:03:07 +01:00
Alessio Morale
3044185019 Merge remote-tracking branch 'origin/amorale/OP-1218_pios_com_thread_safe' into rel-14.01
Conflicts:
	flight/modules/RadioComBridge/RadioComBridge.c
2014-02-17 15:24:50 +01:00
Corvus Corax
0ebc92d9f5 Merge branch 'corvuscorax/OP-942_task-diagnostics-for-callbacks' into corvuscorax/OP-1216_flight-control-refurbishment
Conflicts:
	flight/modules/AltitudeHold/altitudehold.c
2014-02-16 19:08:39 +01:00
Corvus Corax
7dd911efdb OP-1217 change the way modules are enabled/disabled based on flightstatus 2014-02-16 19:07:31 +01:00
Corvus Corax
1898d0ad35 OP-1217 create new receiver module
This module includes all the receiver IO and parsing/failsafe
functionality of ManualControl, but does none of the interpretations in
regards to flight mode / actuator control or arming that was included in
the old ManualControl

In a second step the old ManualControl module needs to be adapted to do
only these ommitted things in a modular way - as a delayed callback
2014-02-16 15:09:08 +01:00
Corvus Corax
d6ede78fd7 dummy commit - renamed file back 2014-02-16 13:52:04 +01:00
Corvus Corax
227aab80b9 OP-1217 moved manualcontrol to receiver 2014-02-16 13:49:51 +01:00
Corvus Corax
f066bcb2d9 OP-942 changed enum term from HARMLESS to WARNING as requested 2014-02-16 12:50:40 +01:00
Corvus Corax
37ef381f8d OP-1216 clamping of throttle to -1 in actuators (optional) 2014-02-16 12:27:01 +01:00
Corvus Corax
5f2ce2e0a1 Merge branch 'next' into corvuscorax/OP-1216_flight-control-refurbishment 2014-02-16 12:26:45 +01:00
Alessio Morale
8cd5cfe2eb OP-1218 format/consmetic/comments fixes 2014-02-15 22:05:56 +01:00
Alessio Morale
21b0049a68 OP-1218 fix missing "ret =" 2014-02-11 16:51:56 +01:00
Alessio Morale
15200eafd8 OP-974 add bootloader revision info in FirmwareIAP 2014-02-11 12:38:55 +01:00
Alessio Morale
1ba5dbaca8 uncrustify 2014-02-10 22:57:24 +01:00
Alessio Morale
e16cf0ef8d OP-1218 changes to RadioComBridge to support return code. 2014-02-09 19:57:16 +01:00
Corvus Corax
b5a27d05e7 OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart 2014-02-09 19:37:22 +01:00
Corvus Corax
7ec21a8f36 OP-942 duplicated exact API of task_monitor to also monitor callbacks
This allows cleaner and fine grained handling of STACKOVERFLOW alarms
2014-02-07 22:39:16 +01:00
Alessio Morale
8bdadaaff2 OP-1212 better wait on priority queue than std queue 2014-02-07 20:01:02 +01:00
Alessio Morale
7a39d93952 OP-1212 handle priority queues for setUpdatePeriod and setLoggingPeriod 2014-02-07 18:36:33 +01:00
Corvus Corax
9a6072d58c Merge branch 'next' into corvuscorax/OP-942_task-diagnostics-for-callbacks
Conflicts:
	flight/targets/boards/simposix/firmware/Makefile
2014-02-07 00:31:32 +01:00
Corvus Corax
6566a29054 OP-942 reliable and fast free stack test algorithm - will always 'see' overflows 2014-02-06 23:54:30 +01:00
Corvus Corax
c7ada40c2e Merge branch 'corvuscorax/OP-1211_time_measurement_helper' into rel-14.01 2014-02-06 19:56:47 +01:00
Alessio Morale
df2bb8eb84 OP-1149 missing uncrustification 2014-02-06 00:57:57 +01:00
Alessio Morale
5bb5b34447 OP-1149: second order correction for all gyro axis. Add calibrated range contraint for temperature.
cleanup replacing all the arrays of floats[] with corresponding AccelGyroSettings* structs.
2014-02-06 00:57:27 +01:00
Alessio Morale
c9f9faafd5 OP-1149: all gyro have second order temp bias polynomials. remove unneeded copies of AccelGyroSettings values 2014-02-06 00:52:44 +01:00
Alessio Morale
13f1f3f23a OP-1212 Add "priority" attribute to uavojects that grant them higher priority when sent with telemetry 2014-02-04 21:03:42 +01:00
Alessio Morale
01822d7a0c OP-1212 Fix priority queue handling and use it for setting processing 2014-02-04 20:49:36 +01:00
Corvus Corax
28be9cc8ce OP-1211 adapted existing code to use new pios functionality instead of separate error prone implementations 2014-02-04 19:48:33 +01:00
Corvus Corax
a3bb523bf3 OP-1211 adjusted alpha value to more sensible default 2014-02-04 19:21:33 +01:00
Corvus Corax
723e22aa1a OP-1211 time_measurement_helper 2014-02-04 19:05:17 +01:00
Alessio Morale
eea194d22f OP-1149: fix type for accel bias. 2014-02-03 20:30:10 +01:00
Corvus Corax
49a1c4c28f OP-942 refactored callback scheduler to fit into PiOS naming scheme 2014-02-02 22:08:16 +01:00
Corvus Corax
b076ba02a1 OP-942 API change to CallbackScheduler - include unique ID for each callback for a taskinfo like UAVObject 2014-02-02 19:54:17 +01:00
Alessio Morale
27c19d7cb1 OP-1149/OP-1150: uncrustify/Cleanup 2014-02-02 18:53:35 +01:00
Alessio Morale
e599b01806 OP-1149: Fix calibraton settings not loaded at startup. 2014-02-02 18:50:53 +01:00
Corvus Corax
8b25ac1894 OP-1195 adapted task priorities for manualcontrol and stabilization 2014-02-02 14:13:25 +01:00
Alessio Morale
68d676db64 OP-1149: limit accel/gyro correction to calibrated temperature range. 2014-01-31 21:01:09 +01:00
Alessio Morale
f1bea0556d OP-1149: limit baro correction to calibrated temperature range. 2014-01-28 23:08:28 +01:00
Alessio Morale
9c1c556c9c Merge branch 'amorale/OP-1139_baro_2nd_order_compensation' into amorale/OP-1149_gyro_accel_thermal_calibration 2014-01-26 22:54:57 +01:00
Corvus Corax
ee452c8d4d OP-1192 Do not allow craft to be armed if input is incorrectly calibrated (and throttle cant go < 0 ) 2014-01-23 21:36:45 +01:00
Alessio Morale
02c7084196 Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2014-01-23 01:02:13 +01:00
Alessio Morale
99e9009c14 Merge branch 'amorale/OP-1188_stabilization_stack_optimization' into rel-14.01 2014-01-22 20:27:25 +01:00
Alessio Morale
c1f810f1ce OP-1188 fix an issue that is preventing bank initialization at startup 2014-01-22 00:01:38 +01:00
Alessio Morale
f9ac3a3de2 OP-1188 Optimize stack utilization for multipid bank selection in Stabilization module
+review OPReview
2014-01-21 22:44:26 +01:00
Corvus Corax
6d855fbaf0 OP-1177 remove cc algorithm from altitude hold code 2014-01-21 20:21:38 +01:00
Alessio Morale
7188394e39 Uncrustification 2014-01-19 12:37:25 +01:00
Alessio Morale
1b0c301c20 OP-1152 Fix stabilization stack size on Revo. 2014-01-18 17:59:56 +01:00
Alessio Morale
1f61676d0a Merge branch 'amorale/OP-1152_stack_verification' into next
Conflicts:
	flight/targets/boards/coptercontrol/firmware/inc/pios_config.h
2014-01-18 13:54:06 +01:00
Cliff Geerdes
02dfac7e6e OP-1167 set default for FSM switch to first position 2014-01-17 23:52:16 -05:00
Corvus Corax
91d5a865da uncrustification 2014-01-18 00:32:50 +01:00
m_thread
234626444e Merge remote-tracking branch 'origin/next' into thread/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per 2014-01-17 13:16:15 +01:00
Cliff Geerdes
bfb5a248a0 OP-1154 enables for individual flight mode switch positions 2014-01-16 16:51:19 -05:00
Corvus Corax
41202a0227 Merge branch 'corvuscorax/OP-1022_AH_improvements_amorale' into next 2014-01-15 22:47:42 +01:00
Les Newell
2b32c5ebc3 Merged theothercliff/OP-1154_Cruise_Control_automatically_increase_copter_throttle_per_1/cos(bank_angle)
Changed pid banks to use flight mode switch position instead of FlightStatus.FlightMode
2014-01-15 19:37:13 +00:00
Les Newell
f096d01e3c Merge branch 'next' into LesNewell/OP-984_PID_banks_flightmode 2014-01-15 19:17:06 +00:00
Philippe Renon
694747cd27 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
2014-01-15 20:12:08 +01:00
Cliff Geerdes
e6490c0cea OP-1154 Add FlightModeSwitchPosition to ManualControlCommand 2014-01-15 13:53:14 -05:00
Corvus Corax
9997f14d68 Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-15 18:45:09 +01:00
Corvus Corax
92beb54e2d OP-1022 some small cosmetic fixes for AltitudeHold as suggested by Alessio 2014-01-15 18:43:47 +01:00
Philippe Renon
d43b220dc0 OP-1122 uncrustified gcs and flight 2014-01-14 22:46:01 +01:00
Corvus Corax
3b635693a5 OP-1161 changed the way magnetometer-errors are handled - and defaults
* ekf will ignore magnetometer errors for initialization
 (errors might be caused by not yet existing attitude estimation)
* defaults changed for filtering
* magnetometer sensor will be available for all filters, alarms need to
  be checked separately
2014-01-14 21:09:14 +01:00
Philippe Renon
1fca85784c OP-1122 OP-1145 added more path plan checks :
- empty plan (i.e. no waypoints defined)
- out of range waypoint and path action ids

+review OPReview-609
2014-01-14 21:08:40 +01:00
Philippe Renon
8ccdb252d1 OP-1122 OP-1145 commented out PIOS_DEBUGLOG_Printf calls in pathplanner
+review OPReview-609
2014-01-14 21:08:35 +01:00
Philippe Renon
7f2c24db2b OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan
+review OPReview-609
2014-01-14 21:05:16 +01:00
Les Newell
3b0525c4ab OP-984 Uncrustified 2014-01-14 19:03:42 +00:00
Corvus Corax
75b1a7ff5f OP-1161 moved mag validity check function from sensors to state estimation 2014-01-14 16:45:44 +01:00
Corvus Corax
c180846ca9 OP-1161 discard magnetometer in filters if plausibility alarm is set 2014-01-14 16:45:21 +01:00
Corvus Corax
3d1cc31c3b OP-1161 Add alarm for magnetometer plausibility check 2014-01-14 12:22:01 +01:00
Corvus Corax
07d5c8e4d2 OP-1022 fixed the config plugin widget to represent new simpler settings layout 2014-01-14 00:26:27 +01:00
Corvus Corax
76ee48bc44 OP-1122 safer sanity checks and arming prevention in case of invalid flight plan 2014-01-12 21:37:40 +01:00
Corvus Corax
cb9e76b006 OP-1122 add flightplan safety check to pathplanner - failsafe rth when flightmode is set to pathplan but no valid plan is uploaded 2014-01-12 21:05:54 +01:00
Corvus Corax
b8118f51e7 OP-1156 Made PathPlanner work with delayed callbacks in "navigation" callback task
Conflicts:
	flight/modules/PathPlanner/pathplanner.c
2014-01-12 20:13:48 +01:00
Corvus Corax
2ce0cb7909 reverted changes to fixedwingpathfollower - wrong module 2014-01-12 20:13:00 +01:00
Philippe Renon
a64720a9f1 OP-1122 OP-1158 added flight plan CRC consistency checks (in GCS and fixedwingpathfollower module)
- need to do the same in vtolpathfollower module)
- addressed an issue that could cause unwanted waypoints to be used (path follower was looping over all instanciated wp)
2014-01-12 19:42:12 +01:00
Philippe Renon
ff8a001a51 Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
Conflicts:
	ground/openpilotgcs/src/plugins/config/configpipxtremewidget.cpp
	ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2014-01-12 16:29:17 +01:00
Philippe Renon
aa24f2193a OP-1122 OP-1158 renamed FlightPlanInfo uavobject to FlightPlan 2014-01-12 15:23:21 +01:00
Philippe Renon
d8d9adb1fd OP-1122 OP-1158 remove unused flightplan.h (fixes conflict with new FlightPlan uavobject) 2014-01-12 15:10:15 +01:00
Cliff Geerdes
ccc09721cd OP-1154 Initial version with UAVO's but no GCS GUI 2014-01-11 16:22:20 -05:00
Corvus Corax
77d15b9566 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-11 10:57:31 +01:00
Corvus Corax
f2bc6508c4 uncrustify --- somone forgot to run uncrustify when merging to next -
again!!! ;)
2014-01-11 10:55:50 +01:00
Corvus Corax
ca607ad924 OP-1022 overhaul of altitudehold and manualcontrol - cleanup,
reimplemented safe throttle cutoff and altitudevario features
2014-01-11 10:51:47 +01:00
Corvus Corax
4c078f3dd8 Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale 2014-01-11 09:40:34 +01:00
Les Newell
2e030419ca OP-984 Fixed bad merge of stabilization.c 2014-01-10 22:16:50 +00:00
Les Newell
49cf33ee59 Merge branch 'next' into LesNewell/OP-984_PID_banks
Conflicts:
	flight/modules/Stabilization/stabilization.c
2014-01-10 19:32:44 +00:00
Philippe Renon
8c7792b6e5 OP-1122 OP-1120 Added a new FligthPlanInfo uavobject
- FligthPlanInfo contains the number of waypoints and action pathes
- FligthPlanInfo contains a CRC of all waypoints and action pathes
- The CRC is not yet implemented
- These informations will be used to check the consistency of a flight plan
2014-01-09 01:06:00 +01:00
Philippe Renon
03b3dca76c OP-1122 OP-1145 flight telemetry improvement
- create periodic queue events only for periodically updated uavobjects
- made error handling more robust
- added a FIXME concerning FlighTelemetryStats as it is updated peridocally using two separate mechanisms
2014-01-06 21:48:34 +01:00
Philippe Renon
772c395e67 OP-1122 OP-1145 fixed handling of ground messages done by OPLM
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
2014-01-06 21:35:00 +01:00
Alessio Morale
adde6b2f34 OP-1153 Fix for simposix 2014-01-05 23:32:20 +01:00
Alessio Morale
fff060ed9d OP-1153 Add a way to monitor SystemMod stack usage without DIAG_TASKS=y
SystemStats.SystemModStackRemaining field does contains the relevant information.
2014-01-05 23:28:31 +01:00
Cliff Geerdes
a48b9cc242 OP-1117 reduced CPU for CC/3D coded log2f() / powf() 2014-01-04 04:22:54 -05:00
Cliff Geerdes
54ac7da2e8 OP-1117 bugfix for refactoring, would keep Ki from working at full stick 2014-01-02 00:56:55 -05:00
Alessio Morale
bd1442437f OP-1139: fix wrong sign for bias and some optimizations
+review OPReview-598
2014-01-01 19:13:26 +01:00
Corvus Corax
f5dbe29896 Merge remote-tracking branch 'origin/amorale/OP-1139_baro_2nd_order_compensation' into corvuscorax/OP-1022_AH_improvements_amorale 2013-12-31 16:38:15 +01:00
Corvus Corax
cefcb9881a Altitude Hold - compensation for tilt 2013-12-29 19:09:54 +01:00
Alessio Morale
e04cef2fa4 OP-1149 Uncrustify 2013-12-29 18:45:44 +01:00
Alessio Morale
ac3d7b8d11 OP-1149 Implements thermal accel/gyro bias correction for CC3D 2013-12-29 14:23:46 +01:00
Alessio Morale
260db3446c OP-1149 changes in CC/CC3D code to use AccelGyroSettings for bias/scale instead of AttitudeSettings.
Bias units of measure are now normalized between CC/CC3D/Revo.
2013-12-29 14:08:53 +01:00
Corvus Corax
505d334c4b simplified altitude hold control loop 2013-12-27 18:37:27 +01:00
Alessio Morale
7ac2f9f87f OP-1149 Move accel/gyro calibration setting to a separate object, to be reused also for CC3D 2013-12-26 16:55:57 +01:00
Alessio Morale
558e2e1437 OP-1149 introduce a first order temperature calibration for gyro and accel.
gyro Z is instead using a 2nd degree polinomial for better accuracy as
its drift is harder to be corrected as with the other twos.
2013-12-25 18:11:53 +01:00
Cliff Geerdes
14aa1f83de OP-1117 make anti windup insensitive to Ki changes, include dT in calcs, linearize config spinner 2013-12-19 03:21:30 -05:00
Philippe Renon
5f33fadb1b OP-1122 OP-1145 flight side uavtalk and telemetry enhancements
- added more stats (bytes, sync errors, crc errors)
- made error handling more robust
- added some optional PIOS_DEBUGLOG calls
- fixed a timestamp handling bug
2013-12-19 00:17:08 +01:00
Cliff Geerdes
56b4d8647f OP-1117 Rename Horizon to Rattitude, Anti Windup and dT additions 2013-12-18 05:01:16 -05:00
Cliff Geerdes
35f6caa360 OP-1117 create a second set of rate PIDs so MWH can run rate and attitude separately 2013-12-16 13:42:24 -05:00
Cliff Geerdes
150dbebc63 OP-1117 MultiWiiHorizon flight mode only (not cliffs H1 or H2) 2013-12-15 22:02:06 -05:00
Alessio Morale
f95a86eaed OP-1139: missing uncrustification 2013-12-13 17:10:39 +01:00
Les Newell
faa1b61bf6 OP-984 txpid not using the selected pid bank 2013-12-12 12:11:00 +00:00
Les Newell
0afe6afd11 OP-984 Fixed insufficient stack for stabilization 2013-12-11 19:24:13 +00:00
Les Newell
024d74c0df OP-984 stabilization.c - commented out code that mirrors change to the current bank data object back to the selected bank. This is left in just in case later modules want to be able to modify the currently selected bank. 2013-12-11 17:09:17 +00:00
Les Newell
63ecf6ad73 OP-984 txpid can now select which bank it operates on, rather than using the flight mode selected bank. 2013-12-11 17:09:12 +00:00
Les Newell
68b8586c6b OP-984 Changed stabilization.c to handle multiple pid bank objects 2013-12-11 17:09:08 +00:00
Les Newell
641cf474eb OP-984 Fixed missing include in manualcontrol.c 2013-12-11 17:09:04 +00:00
Les Newell
084e3ccd5d OP-984 Modified manualcontrol to handle pid bank 2013-12-11 17:08:47 +00:00
Les Newell
d625242a45 OP-984 Updated vtolpathfollower to handle PID banks 2013-12-11 17:08:39 +00:00
Les Newell
b550e67056 OP-984 Updated txpid to handle pid banks 2013-12-11 17:08:31 +00:00
Les Newell
f523ba949d OP-984 Modified manualcontrol to use PID bank data object 2013-12-11 17:08:27 +00:00
Les Newell
fddf61377e OP-984 More changes to stabilization.c for bank switching 2013-12-11 17:08:22 +00:00
Les Newell
114c0ac561 OP-984 Added multiple banks code to stabilization.c 2013-12-11 17:08:18 +00:00
Les Newell
ec713be3ea OP-984 Added data UAV object for current stabilization bank 2013-12-11 17:08:10 +00:00
Alessio Morale
44269b6762 OP-1139: export corrected pressure value to uavobject 2013-12-10 02:02:30 +01:00
Alessio Morale
634ba79dcb OP-1141: allow to input a barometer bias model.
It uses a 3rd degree polynomial to model pressure bias as a function of temperature.
2013-12-10 01:46:28 +01:00
Corvus Corax
95d52c6b08 fixed signs in control loop 2013-12-08 14:00:18 +01:00
Corvus Corax
84af4b7651 fixes to barofilter 2013-12-08 14:00:09 +01:00
Corvus Corax
66b0ffd682 small fix to baro state filter - more init cycles 2013-12-08 13:35:00 +01:00
Corvus Corax
5cc8dedadf uncrustify changed things 2013-12-08 13:07:26 +01:00