rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
1,001 Commits 5 Branches 8 Tags 266 MiB
b084fc4be5
Commit Graph

29 Commits

Author SHA1 Message Date
stac
90f9e6d309 openocd: support OP and AHRS at the same time 
Split the floss-jtag.cfg file into separate versions
for OP and AHRS.

Push AHRS onto non-default ports for gdb, tcl and
telnet.

Update the AHRS gdb setup script to point at the new
gdb port.

Add (commented out) example sytax to support distinguishing
between multiple floss-jtag boards that don't have serial
numbers.  Uses the usb bus address of each device as the
selector.  See this patch posted to the openocd mailing list
for how to add this functionality to openocd:
  http://lists.berlios.de/pipermail/openocd-development/2010-June/015785.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@755 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-13 04:22:30 +00:00
stac
a03b948fb5 gdb: add gdb init + hooks for AHRS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@708 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-06-03 13:58:16 +00:00
stac
f6de7ff54f gdb: Add pre/post hooks to fix stepi 
This fixes the gdb stepi command to allow the M3 core to make
forward progress even when interrupts are pending.  M3 Core interrupts
are masked/unmasked in pre and post command hooks.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@636 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-18 04:50:36 +00:00
stac
0e3a5550ba gdb: Add pre/post hooks to fix step, next, finish 
The gdb commands step, next and finish on the M3 core would
never make forward progress since there is almost always an
interrupt pending.  This is a known problem on the M3, and is
fixed by adding pre and post command hooks which mask and unmask
all ISRs on the M3 core.

Step, next and finish now work as expected, but care should be
taken when using these commands across any part of the code that
actually _needs_ the interrupts in order to make forward progress.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@622 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-14 04:32:17 +00:00
stac
0826af11e5 Add startup script for gdb for openpilot board 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@597 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-07 01:44:57 +00:00
dankers
58e4dd4757 Use usb-layout in floss-jtag - use OpenOCD 4 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@354 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-03-20 22:02:35 +00:00
dankers
9b90cafb52 JTAG config files, also new floss-jtag for testing using the usb-layout 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@353 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-03-20 21:55:29 +00:00
dankers
ce99cc9ae9 Olimex config for Vassilis 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@352 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-03-20 20:12:36 +00:00
gussy
a189557d7f Updated workspace for debugging. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@221 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-03-02 08:36:38 +00:00
gussy
61110c969d More changes to the workspace. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@217 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-03-01 02:50:32 +00:00
gussy
792791b68a Small Update of Workspace. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@215 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-02-28 21:26:58 +00:00
gussy
54489afe59 New Eclipse workspace files, you MUST use these from now on. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@214 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-02-28 12:20:53 +00:00
dankers
484ad3ecfa Deleted old JTAG cfg file. 
Floss-JTAG is working and now standard.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@186 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-02-10 14:57:11 +00:00
dankers
41990f3d6c Updated. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@185 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-02-10 14:42:29 +00:00
dankers
2f48c92a34 Floss-JTAG Added. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@184 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-02-10 14:36:29 +00:00
dankers
f3bd58e851 Unused DIR 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@147 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-31 18:05:02 +00:00
gussy
3b32b89839 Updated copyright headers. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@146 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-31 17:56:54 +00:00
dankers
2d43c2d82f Back to real tiny-h 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@135 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-22 03:54:47 +00:00
dankers
9a6ad2b094 Update for V... 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@134 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-22 03:27:16 +00:00
dankers
1320fc06be Update built params so we are compatable with tiny-h and the older Olimex JTAGs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@130 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-20 05:11:45 +00:00
dankers
98d0608be2 Use the tiny-h config file as they have arrived. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@129 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-18 03:53:09 +00:00
dankers
9bab84665d Update to remove breakpoints 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@128 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-02 14:21:37 +00:00
dankers
56ffcc1c97 Update Eclipse Workspace 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@127 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-01-02 11:59:25 +00:00
dankers
48765a74ca Update Skeleton C file. Used for new files for the project. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@116 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-24 02:43:29 +00:00
dankers
bb729c4392 Workspace for Eclipse, see Eclipse setup on the wiki. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@102 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-22 19:42:17 +00:00
dankers
19697b6f5e Jtag Bits 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@93 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-22 01:47:21 +00:00
dankers
0bfd6b40e5 Eclipse WorkSpace place holder. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@92 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-21 21:55:52 +00:00
dankers
5e15e853e6 Update the Makefile with new OpenOCD 3 commands. Add config files for OpenOCD in to project folder. This will change as we are moving to the H series tiny as soon as someone gets them in stock. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@83 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-21 03:05:34 +00:00
dankers
f1d40bbf42 Simple Skeleton files, they are not yet complete. Need to add comments where various definitions go. Once that is done, need to change project to reflect this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@80 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2009-12-19 21:36:33 +00:00