Kevin Finisterre
4d250ff856
Fix channel indexes to use servoCenterSlider
...
Set channelNeutral = 1500 where appropriate for each model type.
Add the missing actuator save for fixed wing! actSettings->setData(data);
2014-05-25 15:20:04 -04:00
Philippe Renon
e3e92efc70
OP-1174 uncrustified
2014-05-05 00:05:51 +02:00
Philippe Renon
1bca36ab8d
OP-1174 auto update wizard : removed now (hopefully) uneeded workarounds
2014-05-03 17:42:19 +02:00
Philippe Renon
9573e141aa
OP-1174 auto update wizard - error messages are now shown in red
2014-05-02 08:53:40 +02:00
Philippe Renon
fababeeeee
OP-1174 wizard upgrade page - made all strings translatable
2014-05-01 23:19:50 +02:00
Philippe Renon
7fef044325
OP-1174 wizard upgrade page - removed now uneeded fix that caused the wizard dialog to flicker
2014-05-01 23:14:35 +02:00
Philippe Renon
e8cb96f90d
OP-1174 uploader gadget - removed popup to disconnect when using auto update.
...
Fix also applies to vehicule setup wizard autoupdate page
Instead of using a popup that requires user to click Ok, GCS will wait untill all boards are disconnected
This fix induces lots of cleanups.
2014-05-01 22:48:22 +02:00
m_thread
a99de5d326
OP-1222 Fixed svg files. Cleaned up and grouped items to work in wizard.
...
Removed some translations and simplified some gradients.
Added support for output calibration of Aileron and v-tail wings.
Added comments in the code explaining the various arrays with
indexes and ids in the output configuration page class.
2014-02-14 00:00:52 +01:00
m_thread
f8e6e8c183
Merge remote-tracking branch 'origin/kfinisterre/FixedWingWizard' into thread/OP-1222_Fixed_Wing_Wizard_Support
...
Conflicts:
ground/openpilotgcs/src/plugins/config/cfg_vehicletypes/configfixedwingwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2014-02-12 12:34:37 +01:00
Kevin Finisterre
3862c9cfaa
settings still not saving to the board... trying to sort it out. Making sure all necessary codepaths exist in the FixedWing clone of the MultiRotor code for the Wizard.
2013-12-20 02:08:08 -05:00
Kevin Finisterre
33d963d24e
prepping to fix refreshWidgetsValues() so that Output & Vehicle screens populate properly after wizard is run.
2013-12-18 16:41:38 -05:00
Kevin Finisterre
b6f0e5e305
Sort out issues with servo vs. motor sliders... finally figure out what wizardIndexes are! per OutputCalibrationPage::setWizardPage()
2013-12-18 15:14:56 -05:00
Kevin Finisterre
9e417f5ee5
Remove some redundant "elevon" stuff for now. Will come back later when proper "elevon + rudder" artwork exists. Currently no different from vtail anyway...
...
Enabled proper channel mixing settings inside the FixedWing wizard Output configuration screen. Attempt to set GUIConfigDataUnion to fixedwing
2013-12-18 12:57:35 -05:00
Kevin Finisterre
6e5e7e4dd3
Work around for a problem caused by lack of elements in the fixed wing SVG for use in the output window.
2013-12-16 20:51:43 -05:00
Kevin Finisterre
82e2c5cf92
Move some code around to accomidate multiple svg images in the output calibration screen.
...
Need to fix the SVG to allow for zooming in on specific channel components as we do with the multi rotor screen.
This has some sloppy comments in if for my own debugging purposes.
2013-12-16 14:29:04 -05:00
Kevin Finisterre
632ffed707
Add the fixed wing plane art to the channel config screen (in progress)
...
Begin adding plane art to Output config screen in wizard.
2013-12-15 21:37:19 -05:00
Kevin Finisterre
604a349d01
Merge branch 'next' into kf_fixes
2013-12-14 17:48:32 -05:00
Philippe Renon
e0115a25b0
OP-1122 OP-1125 cleaned up GCS side uavtalk includes
2013-12-11 22:22:28 +01:00
Fredrik Arvidsson
fbea95e817
OP-1063 Fixed text
2013-12-03 22:03:32 +01:00
Fredrik Arvidsson
336510c3e6
OP-771 Added some descriptive text.
...
OP-1059 Fixed typos.
2013-12-03 20:48:40 +01:00
Kevin Finisterre
0d5e91ee26
I fixed the first screen, now the vtail and aileron models show when slected. For some reason I am unable to move beyond the first wizard screen.
2013-11-25 01:06:07 -05:00
Kevin Finisterre
92c19f2d74
Changed the element id's in one of the SVG files that I incorrectly edited. This prevents the error:
...
Could not resolve property : SVGID_1_
Error comes from qsvghandler.cpp or qsvgstyle.cpp in the QT libraries Qt5.2.0//5.2.0-beta1/Src/qtsvg/src/svg/
The fixedwing-shapes.svg and flyingwing-shapes.svg files need modified to prevent the errors caused by qsvgtinydocument.cpp in the QT libraries.
Couldn't find node aileron. Skipping rendering.
Couldn't find node vtail. Skipping rendering.
These errors come from the case statement that was added to updateImageAnd Description() for FixedWingPage
+ switch (type) {
+ case SetupWizard::FIXED_WING_AILERON:
+ elementId = "aileron";
+ break;
+ case SetupWizard::FIXED_WING_VTAIL:
+ elementId = "vtail";
+ break;
+ default:
+ elementId = "";
+ break;
+ }
A similar error needs to be resolved in connectiondiagram.cpp
+ switch (m_configSource->getVehicleSubType()) {
+ case VehicleConfigurationSource::FIXED_WING_AILERON:
+ elementsToShow << "aileron";
+ break;
+ case VehicleConfigurationSource::FIXED_WING_VTAIL:
+ elementsToShow << "vtail";
+ break;
+ default:
+ break;
+ }
Likewise outputcalibrationpage.cpp will need to reverence the elements inside the SVG file properly.
+ m_vehicleElementIds << "fixed-aileron" << "aileron";
+ m_vehicleHighlightElementIndexes << 0 << 1;
...
+ m_vehicleElementIds << "fixed-vtail" << "vtail";
+ m_vehicleHighlightElementIndexes << 0 << 1;
Until these elements are fixed in the SVG files the wizard will not render properly and allow the user to click *next*.
2013-11-24 17:29:38 -05:00
Philippe Renon
a2ba33f28a
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
Philippe Renon
218d197aa8
OP-983 fixed minor spelling issues in GCS
2013-06-02 12:42:15 +02:00
Fredrik Arvidsson
864300d975
OP-893 Added Auto Update functionality to the firmware page.
2013-05-19 23:00:44 +02:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
David Ankers
915b7857f6
Changed the word maiden to the word first, easier to read and makes more sense for people that use English as a second language
2013-05-19 14:58:57 +10:00
David Ankers
2abcef1071
Changed aircraft word to controller as per Pablo.
2013-05-19 14:57:40 +10:00
David Ankers
3d2f62f014
Removed the CopterControl wording from the bis calib screen om the wizard, this page will be used for the Revo also
2013-05-19 14:55:39 +10:00
Fredrik Arvidsson
360dd75d55
OP-816 Added Accel and Gyro bias calibration support for Revolution board.
2013-04-29 15:11:24 +02:00
Fredrik Arvidsson
9a9578a2a3
OP-816 Added page for Revolution calibration referring to the configuration plug-in until we get 'our ducks in a row' regarding the Revolution calibration procedure.
2013-04-16 20:40:25 +02:00
Fredrik Arvidsson
66b66ee8f4
OP-816 Re-factoring and removal of warnings.
2013-04-16 19:41:13 +02:00
Fredrik Arvidsson
860077c428
OP-816 Added Revolution specific configuration code to Setup Wizard.
2013-04-11 21:25:38 +02:00
Fredrik Arvidsson
2cd3485cf6
OP-816 Fixed Revolution identification and Revolution + OPLink firmware auto-update functionality.
2013-03-03 19:33:24 +01:00
a*morale
43f5bf09c2
Changed missing PipX labels for setup wizard
2012-12-02 13:39:03 +02:00
Oleg Semyonov
46533c5a3b
[OP-746] Fix text for the "Upgrade" button (it is not used but to be in sync)
2012-11-26 17:51:43 +02:00
Oleg Semyonov
089f4a7915
[OP-746] Fix invalid tooltip for the "Upgrade" button of the Vehicle setup wizard (copy/paste error)
2012-11-26 17:41:35 +02:00
Fredrik Arvidsson
08fd9a8153
OP-686 Added code to disable wizard buttons during firmware upgrade procedure. Re-factored some code and fixed some minor bugs.
2012-11-19 01:29:14 +02:00
David Ankers
43e6b38b54
Spelling of Spectrum to Spektrum
2012-11-11 00:31:05 +02:00
Fredrik Arvidsson
dd7b69dbbc
Fixed so that the actuator state error message box does not open behind the wizard. Changed the text to be more informative.
2012-10-16 00:37:15 +02:00
Fredrik Arvidsson
173cf041cb
Fixed texts in Vehicle Setup Wizard.
...
Added new icons for PipX.
Enabled hyper link to esc wiki page on wizard output page.
2012-10-14 16:46:28 +02:00
PT_Dreamer
d25061ac0a
GCS-Hides wizard to display dialog
2012-10-14 01:10:30 +01:00
PT_Dreamer
c99d048eb9
GCS-Wizard
...
Be a bit more verbose on one of the board update messages.
2012-10-11 14:59:18 +01:00
Fredrik Arvidsson
18f2d8e219
Added new button graphix for upgrade button on autoupdate page. Changed the texts slightly to be less offending. ;)
2012-10-11 13:31:02 +02:00
PT_Dreamer
8863601715
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into pt/wiz_autoupdate
2012-10-10 18:22:53 +01:00
Fredrik Arvidsson
befa5da671
Fixed layouts in the setup wizard and made the wizard resizeable.
2012-10-10 00:36:29 +02:00
Fredrik Arvidsson
c03ac35780
Added functionality for skipping autoupdate page if no firmware is available in resource bundle.
2012-10-07 21:49:07 +02:00
PT_Dreamer
4ef8b78ff8
GCS-Made autouploader fetch fw from fw bundle
...
Fw bundle is built with "make package_resource".
This target is a dependency of the package target but needs testing
on the different systems.
If the bundle is not present the build will not fail and
the wizard will jump the autoupdate page (not working FIXME)
2012-10-06 23:24:21 +01:00
PT_Dreamer
5d24bc55a6
GCS-Created wizard firmware autoupdate page
2012-10-06 01:42:33 +01:00
PT_Dreamer
d9afd58ee2
GCS-Added layouts to new wiz
2012-10-04 15:37:16 +01:00
