1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

5162 Commits

Author SHA1 Message Date
Stacey Sheldon
4ea1156e7b f4 bl_helper: teach bl_helper about f4 flash sector map 2012-03-07 19:53:17 -05:00
Stacey Sheldon
d1d123e4f6 revo bl: turn on USB and add support for OP DFU protocol 2012-03-07 19:53:17 -05:00
Stacey Sheldon
b8fcbad297 revo bl: remove unneeded code from revo BL
Clean up BL source tree and makefile.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4 usbhook: add support in API for deactivating USB 2012-03-07 19:53:17 -05:00
Stacey Sheldon
cb9c3a9b7e usbhook: delete dead code
Remove old code left-over from porting from F1 to F4.
2012-03-07 19:53:17 -05:00
Stacey Sheldon
50b74fa90c revo: increase FW_BANK_SIZE to be flash sector aligned
The F4 CPUs have 16KB x 4, 64KB x 1 and 128KB x 7 sectors
of flash.  The FW image currently ends in the middle of a
128KB sector.  FW_BANK is now increased to end on a sector
boundary.
2012-03-07 19:52:54 -05:00
Stacey Sheldon
e2ab662b5d sysclk: pass in correct definition for HSE_VALUE
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK.  This in turn is used by the
code in PIOS_DELAY_* to compute delays.

ST Library defaults this to 25MHz for the F4.  Our board
actually has an 8MHz oscillator so delays were way off.

Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
2012-03-07 19:52:54 -05:00
Stacey Sheldon
fdf54ab86c hid: fix response to HID descriptor
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor.  This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
2012-03-07 19:52:54 -05:00
James Cotton
61d59828dc Disable the new features if not revolution and set an error flag. Fixes
compilation errors.
2012-03-05 00:24:11 -06:00
James Cotton
11e7f58b63 Merge remote-tracking branch 'origin/os/features/pid-tuning-from-transmitter-next' into next 2012-03-05 00:18:17 -06:00
Alessio Morale
637af911ef Merge remote-tracking branch 'origin/james/revolution' into amorale/revolution 2012-03-04 12:31:13 +01:00
James Cotton
7961aba83c Clean up a few more compiler warnings
Conflicts:

	flight/PiOS/Common/pios_ms5611.c
2012-03-03 13:32:56 -06:00
James Cotton
91a226fc12 Sometimes the mag stops updating so kickstart it 2012-03-03 13:31:46 -06:00
James Cotton
ab8b71a6c1 Bump openocd git revision since the old one doesn't exist anymore (??) 2012-03-03 12:03:47 -06:00
James Cotton
bc8b72623e Get rid of some unused variables 2012-03-03 11:54:09 -06:00
James Cotton
b3f620af7c Merge remote-tracking branch 'revo/stac/openocd' into revolution 2012-03-03 11:52:09 -06:00
James Cotton
f20e5da9ed Merge branch 'next' into revolution
Conflicts:
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configrevowidget.h
	ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
Stacey Sheldon
d53b760937 openocd: Add support for cross-compiling openocd for windows
Linux users can now cross-compile openocd to run on windows.

Here are the steps:
  sudo apt-get install mingw32
  make ftd2xx_install
  make libusb_win_install
  make openocd_git_win_install
  (cd tools; zip -r openocd-win-patched.zip openocd_win/)

This should simplify rolling out new versions of the tool and
provides an example for how to cross-compile future tools as
well.
2012-03-03 08:43:01 -05:00
Stacey Sheldon
0684a42fac build: use board-specific JTAG interface for openocd
Removes hard-coding of JTAG interface config in the
<board>_program make macros.

This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
2012-03-03 08:43:01 -05:00
Stacey Sheldon
d78c5d2a9a openocd: reenable flash commands on f4 boards 2012-03-03 08:43:01 -05:00
Stacey Sheldon
c0c38609ec openocd: move to newer openocd (dec6b913)
This update fixes flash writing on F4 chips
2012-03-03 08:43:01 -05:00
James Cotton
3c92e1cbcf Set the grahpicssystem to "raster" in the code after the reported performance
benefits.  This can be overriden on the commandline with -graphicssystem
2012-03-02 18:14:23 -06:00
Alessio Morale
226cd09a13 Merge branch 'james/revolution' into amorale/revolution 2012-03-02 21:24:56 +01:00
James Cotton
e3df261213 Merge branch 'stac/revo-usb' into revolution
Conflicts:
	flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
zedamota
6d004f06f5 Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next 2012-03-02 18:48:11 +00:00
zedamota
05ef028f9d GCS - Make the save/apply operation result icons disappear when the form contents changes. 2012-03-02 18:47:24 +00:00
James Cotton
72a93dbae5 Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not
all used.
2012-03-02 11:11:36 -06:00
Alessio Morale
e8880d7271 Removed duplicate InitClock for tim_4 2012-03-02 00:55:50 +01:00
James Cotton
21699a3fce Set the grahpicssystem to "raster" in the code after the reported performance
benefits.  This can be overriden on the commandline with -graphicssystem
2012-02-29 22:22:43 -06:00
Alessio Morale
691e8760bc Updated OpenPilotOSX.xcodeproj to include Flight as a reference to the actual folder 2012-02-29 23:13:02 +01:00
zedamota
37975dc00a GCS-Fixes new stabilization controls decimal places 2012-02-29 18:28:26 +00:00
David Ankers
d38a173bed Bug: Spinbox for PitchRateKp was linked to the wrong UAVObject 2012-02-26 16:40:08 +11:00
Dmytro Poplavskiy
3d05256a36 Welcome page UI tweaks
To make it closer to proposed design.

* Aligned the background OP logo to the bottom-right corner
* Don't upscale the OP logo
* Fixed width of community panel
* Changed the vertical layout of icons and community panel
* Fixed color of community panel titles
* Use styled text for next containing &,
   this fixes rendering but "..." are not displayed
2012-02-25 20:17:55 +11:00
Corvus Corax
a16c392bc6 Change to GLC Lib to make it compile on Linux with QT 4.8.0. 2012-02-24 14:28:48 +01:00
Oleg Semyonov
e62cc8914c Merge remote branch 'origin/next' into os/features/pid-tuning-from-transmitter-next
Conflicts:
	flight/CopterControl/Makefile
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
2012-02-22 23:03:17 +02:00
Oleg Semyonov
403e9cd220 TxPID module: add ILimit values to the list of settings 2012-02-21 19:57:10 +02:00
James Cotton
7b548eaa54 Fix bug in the integral for altitude hold where it was accumulating wrong variable. 2012-02-21 00:40:55 -06:00
David Ankers
709c985b17 Update to Dado's work on the Stab UI 2012-02-21 03:53:00 +11:00
James Cotton
900780e10c Add bias estimation to the altitude fusion algorithm. Necessary to increase
the gains on acceleration and velocity feedback terms (they are a problem when
biased).
2012-02-19 11:38:09 -06:00
David Ankers
4a0d101f12 Start adding Dado's artwork and GUI changes 2012-02-19 18:05:33 +11:00
David Ankers
f6303b80a5 Constructor was called directly, GCC 4.6.1 on X64 Linux was not a fan
This fixes the build
2012-02-19 14:44:49 +11:00
David Ankers
d79eea0468 Use new icons for welcome plugin 2012-02-19 14:18:32 +11:00
David Ankers
0a352e179a Add Steve's new icons 2012-02-19 13:12:27 +11:00
James Cotton
47fac7e31c Move the throttle setting code for alt hold into the fast accel loop. 2012-02-18 18:16:15 -06:00
zedamota
6fdec3364a Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next 2012-02-18 20:38:22 +00:00
zedamota
91e3ee13fd Fix input and output configuration layout issues. 2012-02-18 20:37:30 +00:00
zedamota
949785d212 Fixes shadow widgets values not being refreshed if master widget default value is equal the the UAVObj field value. 2012-02-18 16:58:10 +00:00
David Ankers
80715fbec3 Update Plist info for Mac 2012-02-18 08:38:01 +11:00
James Cotton
7d4582e5f0 Update the altitude KF to use the updated measurements appropriately and check
in the relevant matlab code to check it and genererate it.  Produces quite
smooth traces.
2012-02-16 05:33:47 -06:00
James Cotton
fbb0b1173a More work from Kenz to improve the matlab parser 2012-02-16 04:24:10 -06:00