rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
Code Issues Releases Activity
2,469 Commits 5 Branches 8 Tags 266 MiB
ba0a089ad4
Commit Graph

525 Commits

Author SHA1 Message Date
peabody124
b9f74a86c3 OP-198 Flight/Libraries: Swap to using circular buffer code from Pip because it 
supports thread safe write/read simultaneously

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2027 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-28 14:30:03 +00:00
sambas
365a2a121a OP-97 flight/GPS: Few fixes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2025 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-28 13:50:34 +00:00
peabody124
aada18a0ea UAVTalk: Update protcol version number to go with new packet format and changed 
a few constants to make it self documenting

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2017 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 17:41:41 +00:00
peabody124
4570d6df23 UAVTalk: Insert a sync byte (0x3C) and the packet size to facilitating handling 
by PipX modems.  This is a change to UAVTalk so GCS and the hardware must all
be updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2016 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 17:16:29 +00:00
sambas
3e462b1434 OP-97 flight/GPS: Disable speed threshold command for those who knows it's needed, check gpsTask->DISABLE_GPS_TRESHOLD 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2014 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 15:51:33 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in 
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 14:31:32 +00:00
sambas
f1ba558fa1 Flight/GPS: Some updates 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2011 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-27 10:39:38 +00:00
peabody124
a2e0cd2240 Stabilization: Dont make queue respond to both raw sensors and attitude because 
causes it to trigger most of the time every 1 ms which is consuming tons of
CPU.  Also lower the failsafe timeout since its likely due to overloading the
event system and we don't want to delay 100 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2005 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:05 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of 
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-24 20:00:02 +00:00
ligi
523b6ad8f7 added hint on how to better distinguish FC/NC 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2001 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-22 12:36:47 +00:00
peabody124
098b2fd693 Flight/System: Double heart rate when system is armed. This is per request in 
IRC, but suggestions are welcome.  In the long run we probably need a sensible
way of embedding some information in the LED but it's not obvious to me.  Also
could have done with callback - sue me. ;)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1997 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-20 05:31:24 +00:00
corvus
50574841bd Moved non primary Stabilization modules into Branches 
simple		- outdated - won't compile
Experimental	- outdated - won't compile
les		- development version - not stable
les+corvus	- development version - not stable




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1993 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-19 19:12:37 +00:00
corvus
8cb04a372f Stabilization: new stabilization variant based on les stabilization module, with several options for coordinate system transformation 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1990 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-18 14:46:45 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-17 14:15:47 +00:00
les
2125e2479d Added AHRS boot loader SPI protocol 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1965 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 17:54:00 +00:00
cwabbott
dff66607c7 More UAVObject fixes, stuff to get PiOS.win32 compiling again. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1962 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-16 12:15:47 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
peabody124
dc10998152 Flight/Stabilization: Make any throttle < 0 reset the pid integral windup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1933 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:06 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-10 00:46:04 +00:00
peabody124
ea85e98d7a Flight/Stabilization: Move update time storage to before the set to make sure 
it goes

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1922 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:28 +00:00
peabody124
8308e4a4fe Whitespace change: get rid of CR 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1921 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:26 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
edouard
85aeffed9a Removed example settings from OpenPilot flight SW makefile too.. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1914 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 17:42:59 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 13:09:35 +00:00
darkz
6b8aba07b1 Updated Makefile.posix to reflect the removal of example code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1907 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-07 02:50:12 +00:00
edouard
5c48c29612 Remove example objects from the flight code, not needed anymore 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1905 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 21:50:57 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended 
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 14:26:40 +00:00
kokomojoe
946283d67e OP-185 Flight - Added FirmwareIAP to the module load list in makefile, added uavobjectsinit.c with firmware IAP init calls 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1896 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 05:30:48 +00:00
kokomojoe
7cf0e9ba31 OP-185 Flight support for firmware IAP object. added the pios_iap.c and firmwareiapobj.c 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1895 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:58:07 +00:00
kokomojoe
6499da40e3 OP-185 Flight Added init function for PIOS_IAP helper functions. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1892 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:07:11 +00:00
kokomojoe
2fe266650f OP-185 Flight - support files for Firmware IAP object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1891 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-06 02:06:13 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:51:33 +00:00
les
1e26ca11ee Manual control: Added some extra room at throttle zero when detecting a faulty signal 
Before, moving your throttle trim slightly could cause ManualControl to think the receiver was not connected

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1885 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:50:03 +00:00
les
b2c81aceee Actuator: Fixed motors not going to min throttle in failsafe. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1884 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:47:48 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does 
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:48:09 +00:00
peabody124
f03669733b Flight/Guidance: Merge back into one task because memory requirements of a task 
exceed CPU requirements of PID.  Also add add lesstabilization UAVObject to Makefile
to fix compile errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1870 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:01:34 +00:00
peabody124
d71e9df8c5 Flight/UAVObjects: Add a few files that were missed earlier, and get posix 
worlking again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1869 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 02:01:31 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 20:39:23 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( . 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:59:58 +00:00
les
11cf24a312 Actuator: Fixed uninitialised variables 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1857 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:37:07 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings. 
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:27 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 16:43:10 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the 
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 03:10:01 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made 
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:32 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to 
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:26 +00:00
peabody124
0fd9fda7a6 Flight/AHRS Comms: Whitespace fixes 
gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 -hnl -l150

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1836 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:22 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication 
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-02 02:17:18 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 20:28:14 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 17:31:13 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the 
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 16:26:43 +00:00
peabody124
d54c6bf0f8 Flight/Actuator: Use dT in seconds. Forgot to change MaxAccel. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1825 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 14:37:03 +00:00
peabody124
0dfdad4fc4 Flight/Actuator: Reset critical alarm 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1824 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 14:09:14 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an 
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 13:45:26 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation 
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous 
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm 
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:26 +00:00
peabody124
b9943645e0 Flight/Actuator: Run actuator from queue again, latency well behaved. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1817 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-01 12:33:20 +00:00
sambas
ee4ca7b93a OP-177 Flight: All alarms fixed, AHRSComms stack size made critical stack alarm, event warning caused by queue that is not used at the moment. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1801 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 19:06:35 +00:00
peabody124
a4e0ee5fdf Flight/Actuator: Move Les' actuator to the active one 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1800 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 18:51:36 +00:00
peabody124
2f6f76d578 Flight/Actuator: Remove old mixer code 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1799 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-29 18:51:34 +00:00
fredericg
f090b4bcf8 OP-174 ET OSD: Fixed build errors due to UABObject changes 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1786 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 19:56:25 +00:00
peabody124
9b1d258a94 Flight/Les/Actuator: Space->Tab, somehow slipped passed previous patch 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1784 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 17:30:42 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms. 
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 09:04:43 +00:00
peabody124
fef8cca5b6 Flight/Posix: Get compiling again (sorry Corvus, I think I messed up your 
change earlier)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1778 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:48 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs 
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:34 +00:00
peabody124
b85e322206 Flight/FlightSituation: Remove unused module 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1774 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:21 +00:00
peabody124
da583e0914 Flight/Guidance: Disable by default 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1768 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:07:40 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:54 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module 
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 03:06:27 +00:00
zedamota
9b05282be5 OP-21/Flight Bootloader - should make things cross platform. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1758 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-26 00:39:01 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to 
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 21:05:38 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration. 
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-25 09:20:38 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement. 
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-24 20:39:37 +00:00
corvus
1472b342c1 1.0 Featur Freeze - 
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-23 22:05:03 +00:00
corvus
e44045f422 OP-165 : Guidance Module 
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-22 22:16:48 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 19:31:17 +00:00
chebuzz
862e35def1 OP/PiOS.posix - Somebody added UAVObjects but did not add them to the posix sim 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1702 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 14:16:14 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-21 07:08:51 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-20 19:27:08 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-19 18:27:53 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 18:15:02 +00:00
andrew
da1a762072 Added basic code for Yaw stabilisation in manual mode for Helis. 
This is functionally the same as having a heading hold gyro in hardware.
Code is copied from the simple stabilisation routine and is a bit rough at the minute, but initial testing looks good.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1670 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 05:52:34 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-17 02:00:55 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 19:19:38 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
0b8756d55c OP-148 AHRS/Comms: For now don't retransmit calibration after comms glitch as this re-zeros gyro bias and makes attitude stutter. Need to explicitly communicate when comms glitches and query if AHRS actually rebooted. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1654 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 05:26:12 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 02:59:00 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 01:54:21 +00:00
pip
73c8194acc Added PIOS_COM_TELEM_BAUDRATE, PIOS_COM_GPS_BAUDRATE, PIOS_COM_AUX_BAUDRATE & PIOS_COM_SPEKTRUM_BAUDRATE defines in pios_board.h with '#if defines' in pios_board.c for easier baudrate changing. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1644 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 17:18:38 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:43:42 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt 
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-15 14:20:59 +00:00
chebuzz
3b5b129445 Fix POSIX simulator to work with new VTOL UAVObjects 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1607 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-13 14:00:53 +00:00
peabody124
47a7b8548b Flight: Safety feature for VTOL. Don't enable motor until throttle brought above .5 then below or to zero. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1604 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 22:18:21 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:49 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:30 +00:00
stac
93ef510946 ahrscomms: use relative delays to avoid slipping 
Change from using vTaskDelay to using vTaskDelayUntil to
ensure that we're trying to stay periodic rather than
just waiting a fixed amount of time after each loop of
processing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1580 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-11 23:06:22 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:41 +00:00
peabody124
61854ac6ab Flight: Support for quadcoptors. The format of this control will change to support octo's and more flexible tuning. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1544 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:39 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef 
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-05 23:10:34 +00:00
peabody124
f9a0b799a2 Foolishly forgot object like I always do 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1529 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 22:01:11 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:07:59 +00:00
peabody124
8dbc382e5b Ground/CoordinateConversions: Shows correct location now. I just typed in a 3.14 constants and forgot to change to M_PI. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1520 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 05:58:43 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:06 +00:00
peabody124
a406034ed9 OP-132 Flight/AHRS: Changed the heuristics regarding GPS quality and INSGPS updates. Now if satellites < 7 or PDOP > 3.5 it does not perform GPS updates. Professor is working on some code to fix parts of the covariance matrix. If indoor updates high a 0 position and velocity and high variance. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1515 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:00 +00:00
cwabbott
d7a3ffb464 flight/PiOS.win32: update Makefile.win32 with new UAVObjects, also change UAVObject headers to have a newline at the end. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1510 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 23:55:24 +00:00
peabody124
d3bb821e82 Flight/ManualControl: Change to ManualControl module to make warning only kick in if input is less than the max and min for throttle. Disable going to (unimplemented) auto mode. Commiting based on one yay and no nay. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1505 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 16:33:02 +00:00
peabody124
ec7d059de8 Posix: Corrected makefile after UAVObjects mashup 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1489 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-31 17:21:44 +00:00
peabody124
12657440c3 OP-132 AHRS: Added an indoor flight mode and also add an ad-hoc quality heuristic to the GPS signal to increase the measurement variance from GPS when fix quality is poor or when in indoor flight mode. In addition corrected the indentation to conform to the tab/space convention forum discussion. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1474 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-31 02:11:09 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error. 
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:20:43 +00:00
andrew
3c6d9d6976 manual control was mapping tx input as -180º -> 180º for AttitudeDesired.Yaw. 
The Wiki (http://wiki.openpilot.org/Unit_Standards) states this should be 0 - 360º
Made the code match the wiki.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1463 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:16:00 +00:00
peabody124
f202884ce8 AHRS: Numerous changes. Added CPU load monitoring for AHRS as well as some friendly debugging output options. Also added a new CalibrationMode setting to AHRS (Echo) to speed up sensor calibration. Cleaned up the 6 point calibration interface to make it more friendly, but I think Edouard will clobber it with something nice and sexy :). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1455 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 06:38:30 +00:00
stac
ecac1fb79d nmea: parse GSV sentences and populate GPSSatellites object 
This creates a new UAVObject called GPSSatellites to hold
information about which satellites the GPS receiver can see
and the quality of their signals.

NMEA GSV sentences are now parsed.  The full set of GSV data
may be split across multiple GSV sentences, each containing
info for at most 4 satellites.  Once an entire set of GSV
records has been collected, the GPSSatellites UAVObject is
updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1453 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 01:46:14 +00:00
stac
2ead641136 nmea: minor bug fixes and robustness improvements 
Remove asserts on bad data, only assert on coding errors.
Remove unnecessary inline qualifier to reduce code size.
Handle more lat/lon precisions in conversion to fixed-point.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1452 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 01:46:11 +00:00
stac
679f59f19d uavobjectparser: fix alignment of field init in generated code 
Change from spaces to <TAB> to match the formatting in
the template.  No functional changes, just whitespace.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1451 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-29 01:46:09 +00:00
peabody124
8128c3bbfa OP-118 AHRS: Added 6 point calibration routine to AHRS config widget. To use it, click "Cal Mode", then place the AHRS on each of 6 sides of a cube then click save position. Finally click compute to push the updated scale abd bias terms to the AHRS. Also fixed a bug in UAVObjectField that would not allow you to setDouble for extra fields. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1449 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-28 18:48:51 +00:00
andrew
3530428982 Fixed the bounding of servo outputs for the case when max < min 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1444 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-28 05:11:19 +00:00
peabody124
00cad250ea Adding gpstime.h for flight. 
Seriously - I'm sorry I missed all these files.  I suck.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1443 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-28 00:58:04 +00:00
peabody124
ced0a4b952 AHRS: Fixed silly bug that made the default mag variance be zero - explains "hopping around" default behavior. Still should run calibration though. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1439 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 21:05:41 +00:00
peabody124
5f9289f0c0 Flight: Keep getting WMM memory usage down 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1438 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 21:05:38 +00:00
peabody124
16361dea12 AHRS: Making AHRS populate the NED/Vel fields of PositionActual. May rename object to PositionVelocityActual. Also created a GPSTime object which is populated from the GPRMC command. Also added a GPZDA parsing command, but by default OP GPS doesn't send this command. Made the computation of the world magnetic model use the current time to set the magnetic vector. Note: currently if you set your home location and save it to SD, this will not recompute the vector over time. I'm not sure how sensitive this is. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1435 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 19:59:25 +00:00
stac
24a4c6b791 gps: Update GPSPosition instead of PositionActual 
GPS module now updates GPSPosition UAVObject
rather than the PositionActual object.  The
GPSPosition object is intended to be consumed
only by the AHRS.  The AHRS will use this (and
other inputs) to compute a filtered version of
the position in the PositionActual object.

This commit will cause temporary breakage of the
GPS functionality in the GCS until the PositionActual
object is properly updated by the AHRS.  Most of the
GCS should continue to use PositionActual.  The only
exception to this might be any tool for specifically
visualizing the raw GPS state.

GPS.c is now only responsible for receiving a
complete NMEA sentence from the COM interface.

NMEA parsing is now factored out into NMEA.[ch]
which is where GPSPosition is now updated based
on the complete NMEA sentences obtained from the
GPS.

Latitude and Longitude are now encoded in a
fixed-point notation in units of degrees x 10^-7
to prevent truncation of precision due to encoding
into a float.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1431 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 02:15:00 +00:00
stac
47df1faa8d ahrs: whitespace adjustments 
No functional changes.  Whitespace/tab fixups only.
Use TRUE/FALSE instead of 1/0.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1430 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 02:14:58 +00:00
peabody124
a0b21bef45 Flight: Got read only check working for UAVObjects and modified the ManualControl Module to use it. Edouard - please check over this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1427 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 00:15:48 +00:00
peabody124
a8df6e2c4d OP-128 Flight Documentation: Added description to all the UAVObject (now mandatory) and changed the parser to populate this information into the autogenerated files. Also added a function to test if an object is read only for flight. 
Since there are a lot of autogenerated changes the important ones are:

  flight/OpenPilot/UAVObjects/inc/uavobjecttemplate.h - added description and define to make the ObjectReadOnly query
  flight/OpenPilot/UAVObjects/uavobjecttemplate.c

  flight/OpenPilot/UAVObjects/uavobjectmanager.c - added the UAVObjReadOnly query

  ground/src/libs/uavobjgenerator/uavobjectparser.cpp - added parsing of description field

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1425 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 00:15:42 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter. 
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-26 06:00:57 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication. 
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 05:32:52 +00:00
andrew
b467b419e6 OP-103, UAVObject update. 
Adding settings for configuring CCPM mixing for Helicopters to ActuatorSettings and SystemSettings UAVObjects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1402 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-25 00:55:15 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 06:03:19 +00:00
peabody124
e94d3d3846 AHRS/Flight: Allow selecting simple algorithm as well as INSGPS 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1384 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:51:08 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 03:39:13 +00:00
peabody124
b32184d1ec OP-119 Flight: Converted HomeLocation object to use cm for the home base instead of floating point. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1382 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:49:53 +00:00
peabody124
2596f43511 OP-120 AHRS: Moved conversion of quaternion to RPY over from AHRS to OP to minimize transfer and computational load on AHRS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1381 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 02:35:39 +00:00
peabody124
0d11493337 Flight: Added mixer settings for elevon. Also added bound checking on servo outputs which becomes important when multiple things are mixed and you want to use the full range. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1380 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 01:54:58 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file." 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 00:52:56 +00:00
peabody124
2e705e6836 OP-116 AHRS: Made data going to the AHRS in NED format. Once the final estimate object is created I'll repeat the same calculation to populate it, although we want to avoid going back to LLA format on the OP because the CPU requirements are excessive. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1376 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 19:01:36 +00:00
zedamota
6adc834d9b OP-21/Flight Prep work for the USB HID bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1375 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 18:57:29 +00:00
zedamota
2daa229a2d OP-21/Flight Prep work for the USB HID bootloader 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1374 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 18:56:00 +00:00
peabody124
60332efec0 OP-118 AHRS: Missed the auto generated files for the default values. Also no idea why last patch changed navigationsettings - either make uavobjects does differently on different platforms or someone forgot to run make uavobjects. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1372 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 17:02:12 +00:00
peabody124
0862d64b8c OP-118 AHRS: Made default calibration values friendly for people. Also fixed bug that would repeatedly trigger calibration when it was requested. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1371 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-22 16:43:00 +00:00