rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
5,194 Commits 5 Branches 8 Tags 266 MiB
bb491b8a3f
Commit Graph

106 Commits

Author SHA1 Message Date
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
James Cotton
2f8049e20a Update the bootloader hw version for the mpu6000 board and make the sensor code 
and initialization respond appropriately.  Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
 2012-03-22 00:41:37 -05:00
James Cotton
e7ca02c038 Initialize mag before mpu6000. Seems more reliable but I don't know why. 2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b Reenable the pressure sensor and other modules 2012-03-21 00:49:29 -05:00
James Cotton
720684c248 Flag to enable pressure/mag 2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c Using some config switches to get this board up and running 2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3 Disable overosync by default. It was triggering event system warnings due to 
the extra updates from altholdsmoothed.  Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
 2012-03-21 00:29:09 -05:00
James Cotton
a319a6b14c Flags to disable mag/baro init 2012-03-14 22:35:09 -05:00
James Cotton
c8d1534b87 Convert inline functions to static, let the compiler figure it out. Also some 
formatting since code was probably written with tabstop = 2 :)
 2012-03-11 13:18:08 -05:00
James Cotton
bbbca319d8 Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution 2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef Support for port remapping on serial ports 
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
 2012-03-11 18:38:49 +01:00
James Cotton
690f1b5f29 Enable camera stabilization 2012-03-08 01:37:34 -06:00
Stacey Sheldon
e2ab662b5d sysclk: pass in correct definition for HSE_VALUE 
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK.  This in turn is used by the
code in PIOS_DELAY_* to compute delays.

ST Library defaults this to 25MHz for the F4.  Our board
actually has an 8MHz oscillator so delays were way off.

Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
 2012-03-07 19:52:54 -05:00
James Cotton
61d59828dc Disable the new features if not revolution and set an error flag. Fixes 
compilation errors.
 2012-03-05 00:24:11 -06:00
Alessio Morale
637af911ef Merge remote-tracking branch 'origin/james/revolution' into amorale/revolution 2012-03-04 12:31:13 +01:00
Stacey Sheldon
0684a42fac build: use board-specific JTAG interface for openocd 
Removes hard-coding of JTAG interface config in the
<board>_program make macros.

This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
 2012-03-03 08:43:01 -05:00
Alessio Morale
226cd09a13 Merge branch 'james/revolution' into amorale/revolution 2012-03-02 21:24:56 +01:00
James Cotton
e3df261213 Merge branch 'stac/revo-usb' into revolution 
Conflicts:
	flight/Revolution/System/pios_board.c
 2012-03-02 13:00:13 -06:00
Alessio Morale
e8880d7271 Removed duplicate InitClock for tim_4 2012-03-02 00:55:50 +01:00
James Cotton
4717af1afd Swap telemetry port and gps ports back 2012-02-12 13:55:52 -06:00
James Cotton
34ca5777dd Kalman filter for altitude 2012-02-11 21:08:19 -06:00
James Cotton
d8f0494e57 Merge branch 'revolution' into revolution_overo 2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c Ported pios_iap.c to F4 
restored failed boot count check on pios_board.c for revo
 2012-02-11 13:49:32 +01:00
James Cotton
49a03a868b Merge branch 'altitudehold' into revolution_overo 
Conflicts:
	flight/OpenPilot/UAVObjects.inc
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
	flight/Revolution/Makefile
	flight/Revolution/ins.c
 2012-02-07 23:00:29 -06:00
Stacey Sheldon
e2939dae2a revo usb: Add support for USB to Revo 2012-02-07 02:25:31 -05:00
Stacey Sheldon
8b73ae7d16 remove trailing whitespace 2012-02-07 02:25:31 -05:00
Stacey Sheldon
b8c16fe7a5 hw defs: move misc defines and non-const data out of board_hw_defs.c 
The board_hw_defs.c file should only contain static
const declarations that only describe the hardware.

All other non-const variables should be put into one
of the pios_board.c files.
 2012-02-07 02:25:31 -05:00
James Cotton
dbcb499d7f Add object to monitor the overo link status. Current just records the bytes/s 
being sent and the connected status (based on sending more than 500 bytes per
second)
 2012-02-06 09:37:31 -06:00
James Cotton
5b2376dbee Remove the semaphore for buffer swapping and make this occur during the receive 
ISR.  This leads to a possible condition where a copy is taking place in
userspace and then a buffer swap interrupts it.  However, the copy should
always finish before the SPI DMA slave catches up to that place in memory at 10
MHz.

This fixes a common condition where the userspace task (low priority) was not
swapping buffers in time from user space and logs were corrupted.
 2012-02-06 08:21:24 -06:00
James Cotton
95abb56d5e Added module to send updates out the SPI port 2012-02-02 09:19:25 -06:00
James Cotton
e434ab94a9 Enable SPI port for revolution to overo communications 2012-02-02 01:42:38 -06:00
James Cotton
13447ac907 Fix the MPU6000 implementation 2012-01-28 00:21:58 -06:00
James Cotton
80705cdba1 Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started 
we cannot use the transaction lock or the delay while saving.
 2012-01-26 11:50:05 -06:00
James Cotton
69dc5abf0c Flash: Get rid of some defines and directly reference the cfg structure 2012-01-26 10:56:26 -06:00
James Cotton
fe7b9a909a LED: Update the LEDs on revo 2012-01-26 09:11:27 -06:00
James Cotton
7eab883d5c Fix some small revolution typos 2012-01-25 22:50:19 -06:00
James Cotton
0da20bb846 Flash: Because most of the commands are a JEDEC standard rename this file 
pios_flash_jedec and abstract out the methods that can vary between chips.
 2012-01-25 00:23:24 -06:00
James Cotton
a02cad6f52 Flashfs: Separate out the sector sizes and magic values into a runtime 
configurable structure.  This makes it easier to deal with different chip
layouts.
 2012-01-24 23:56:59 -06:00
James Cotton
b6c056fef2 Use the updated L3GD20 format and make attitude.c use the gyro data from the 
fifo
 2012-01-24 15:52:17 -06:00
James Cotton
8c208412c9 Give the BMA180 a dynamically allocated device structure and also make it 
properly bind to a SPI and slave number.  Temporarily reducing spi bus to
slowest possible speed.
 2012-01-24 14:38:00 -06:00
James Cotton
c242ab8b86 Merge branch 'next' into revolution3 
Conflicts:
	flight/AHRS/ahrs.c
	flight/AHRS/pios_board.c
	flight/Bootloaders/Revolution/Makefile
	flight/CopterControl/System/pios_board.c
	flight/INS/pios_board.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/System/openpilot.c
	flight/OpenPilot/System/pios_board.c
	flight/PiOS/Boards/STM32103CB_CC_Rev1.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/Makefile
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/test.c
 2012-01-24 10:46:35 -06:00
James Cotton
11471ff68b Update drivers for CC to the new EXTI system and SPI calls 2012-01-24 09:23:12 -06:00
James Cotton
b01d5c6b87 Include the drivers from the common directory 2012-01-23 16:58:07 -06:00
James Cotton
9a12299074 Update the driver cfg structures for the EXTI changes. Make the drivers call 
the pios_exti_init instead of their individual implementations.
 2012-01-23 16:55:52 -06:00
James Cotton
cc0cbf0381 Enable IAP code on revolution now 2012-01-21 13:22:39 -06:00
James Cotton
fe44a3d37a Reference correct taskmonitor file compiled in to revolution 2012-01-21 13:22:17 -06:00
James Cotton
bb0bfe0ae4 Merge branch 'next' into revolution3 
Conflicts:
	flight/Bootloaders/CopterControl/Makefile
	flight/Bootloaders/PipXtreme/Makefile
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/CopterControl/Makefile
	flight/INS/inc/pios_config.h
	flight/Libraries/taskmonitor.c
	flight/Modules/Altitude/altitude.c
	flight/Modules/Attitude/attitude.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/Makefile.posix
	flight/OpenPilot/System/inc/pios_usb_board_data.h
	flight/OpenPilot/System/inc/taskmonitor.h
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/System/taskmonitor.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_bmp085.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/pios.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/System/inc/taskmonitor.h
	flight/Revolution/System/taskmonitor.c
	ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
	shared/uavobjectdefinition/systemalarms.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-01-21 11:27:03 -06:00
James Cotton
5dbbfec8a9 Make the BMA180 driver use the appropriate claim method from the ISR. Also 
slow down this bus to 10 MHz.
 2012-01-21 09:57:02 -06:00
James Cotton
7f284596f2 Attempting to get flash and BMA180 to coexist 2012-01-20 13:33:21 -06:00
James Cotton
1e8811362e On revolution attach the flash chip to the accel bus now. Also extended the 
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
 2012-01-20 07:37:47 -06:00