Laurent Lalanne
20ac6ed1e3
LP-520 Oplink : Send RSSI value as PPM output channel
2017-06-18 23:41:23 +02:00
Jan NIJS
4ba064b017
LP-533 incorrect MCU pin used to toggle inverter for rcvr port on Sparky2
...
Bug introduced by LP-480. The wrong MCU pin is used for toggling the input inversion. This inverted the serial signal when it should not be inverted.
ibus reception and possibly other serial receiver protocols where not working.
PC4 was controlled, but according to the schematic, PC6 is connected to the xor port.
PC4 is actually connected to the gyro interrupt.
This bug explains another issue I saw from time to time. After a restart of the Sparky2 board, gyro and accelerometer graphs remained locked at 0. Making the board unusable for flight.
2017-06-18 12:31:02 +02:00
Laurent Lalanne
ed28311841
LP-482 Complementary+Mag : Allow fast convergence for mag
2017-06-17 23:01:01 +02:00
Laurent Lalanne
ad23d188b5
LP-482 Complementary+Mag : Increase MagKp and MagKi values
2017-06-17 23:00:56 +02:00
Laurent Lalanne
684e0dc14f
LP-482 Increase temporary MagKp for initialisation
2017-06-17 16:50:58 +02:00
Laurent Lalanne
ee7d630e3e
LP-482 Fix Complementary Mag integral sign
2017-06-17 16:49:40 +02:00
Vladimir Zidar
429f8c41be
LP-529 [I2C] [MS5611] Remove PIOS_DELAY_WaitmS() and move (re)initialization into fsm.
2017-06-14 16:12:35 +02:00
Vladimir Zidar
b0fa0edb64
LP-529 [F3] [I2C] Move i2c bus unlocking down to irq, to save one context switch and make bus available for use by other drivers sooner.
2017-06-14 16:10:50 +02:00
Vladimir Zidar
a00af53710
LP-529 [F3] [I2C] Fix nack handling.
2017-06-14 16:10:50 +02:00
Vladimir Zidar
8c60c28b51
LP-529 Fixed i2c port selection for aux mag.
2017-06-14 16:10:24 +02:00
Fredrik Arvidsson
bd555623dd
LP-531 Adds support for Qt 5.9.0
...
SDK install script and Qt installer script updated with new version, paths and URL:s
Explicit casts to char added to avoid clang compiler warnings (treated like errors) on MacOSX and XCode 8.3.2
2017-06-14 00:18:33 +02:00
Brian Webb
ea41e40a4a
Merged in webbbn/librepilot/LP-526-add-msp_servo (pull request #432 )
...
LP-526 Adds support for the MSP_SERVO command to the MSP module.
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-06-13 19:57:31 +00:00
Vladimir Zidar
ff9b1fdd0a
Merged in mindnever/librepilot/LP-522_GCS_Fix_DFUObject_stack_overflow_on_macOS (pull request #431 )
...
LP-522 GCS: DFUObject::CRCFromQBArray - allocate temp buffer on heap
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: David Wilson <dgwilson65@gmail.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-06-13 19:56:52 +00:00
Vladimir Zidar
0448d627af
Merged in mindnever/librepilot/LP-523_implement_uavobject_DataOverrideDefaults_method (pull request #430 )
...
LP-523 Implement method for overriding uavobject defaults.
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Brian Webb <webbbn@gmail.com>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
2017-06-13 19:53:58 +00:00
Brian Webb
22071ba230
LP-526 Adds support for the MSP_SERVO command to the MSP module.
2017-06-06 19:17:25 -07:00
Vladimir Zidar
9f12a27f53
LP-523 Move object id and instance_size members from UAVOData structure into UAVObjType and keep only pointer to it. UAVObjType contains init_callback too to allow resetting data to default values.
2017-06-07 00:47:47 +02:00
Vladimir Zidar
d52f5a02f8
LP-523 uavobject.c.template: Invoke new method $(NAME)DataOverrideDefaults() from $(NAME)SetDefaults()
2017-06-07 00:47:46 +02:00
Vladimir Zidar
27312c4895
LP-528 partially revert 9f16143ba7
(uavobjects cannot be in ccm - loading from external SPI flash optionally uses DMA)
2017-06-07 00:42:57 +02:00
Vladimir Zidar
4f9c89e646
Merged in mindnever/librepilot/LP-527_F0_Remove_peripheral_clocks_micromanaging (pull request #433 )
...
LP-527 Remove peripheral clock managing code
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-06-06 22:34:38 +00:00
Vladimir Zidar
d991607aa5
LP-527 Move PIOS_DELAY_Init() after the peripheral clocks have been started. F0 uses TIM2 for delays.
2017-06-05 01:24:40 +02:00
Vladimir Zidar
aadd17d1b4
LP-527 Remove peripheral clock managing code
2017-06-05 01:24:36 +02:00
Lalanne Laurent
45ba6aa806
Merged in f5soh/librepilot/LP-486_enable_BL_Gpsv9 (pull request #429 )
...
LP-486 GPSv9 : Enable BL and EF firmware build
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Alessio Morale <alessiomorale@gmail.com>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Brian Webb <webbbn@gmail.com>
2017-06-04 19:18:03 +00:00
Vladimir Zidar
0177a824d3
Merged in mindnever/librepilot/LP-512_Support_F3_boards (pull request #426 )
...
LP-512 Support F3 boards
Approved-by: Lalanne Laurent <f5soh@free.fr>
Approved-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Approved-by: Vladimir Zidar <mr_w@mindnever.org>
Approved-by: Philippe Renon <philippe_renon@yahoo.fr>
2017-06-04 11:31:35 +00:00
Vladimir Zidar
d198b7c70a
LP-512 Fixed PikoBLX mpu6000 orientation.
2017-06-02 11:46:40 +02:00
Vladimir Zidar
e44114d794
LP-512 Uncrustify
2017-06-02 11:46:39 +02:00
Vladimir Zidar
61e036d6d3
LP-512 Cleaned up Hw(board)Settings for F3 boards. Removed unneeded stuff.
2017-06-02 11:46:39 +02:00
Vladimir Zidar
8ddd8a029e
LP-512 Cleaned up buzzer configuration and usage for boards with dedicated buzzer port.
2017-06-02 11:46:29 +02:00
Vladimir Zidar
e8b7aacd99
LP-512 update F3 pios_usb.c and pios_usb_cdc.c to include bind_available_cb().
2017-06-01 18:13:24 +02:00
Vladimir Zidar
5194f79784
LP-522 GCS: DFUObject::CRCFromQBArray - allocate temp buffer on heap
2017-06-01 14:07:23 +02:00
Vladimir Zidar
aba9d56ccc
LP-512 Set default fusion algorithm for PikoBLX and tinyFISH
2017-06-01 08:12:14 +02:00
Vladimir Zidar
48ebb8359e
LP-512 GCS: Added missing board images
2017-05-30 23:22:44 +02:00
Vladimir Zidar
bc2ba7dccc
LP-512 tinyFISH FC: provide usable default flight battery settings calibrations (requires LP-523)
2017-05-30 22:27:24 +02:00
Vladimir Zidar
4eeb983f2d
LP-512 Addressed remainging PR comments.
2017-05-30 16:31:39 +02:00
Vladimir Zidar
fb696dc893
LP-512 Remove unused files used for obsolete win32 and osx simulator targets.
2017-05-30 06:21:29 -07:00
Vladimir Zidar
c951370eba
LP-512 Fixed tinyFISH SBus/SensorHub shared port initialization. Telemetry works now by default.
2017-05-30 15:08:43 +02:00
Vladimir Zidar
1680b436cd
LP-512 pios_usart: Shared ports support: Initializing same uart multiple times will return shared driver instance. Added uart configuration locking ioctl.
2017-05-30 15:08:32 +02:00
Vladimir Zidar
45448875d4
LP-512 HwTinyFISHSettings cleanup. First attempt at shared SBus/SensorHub port.
2017-05-30 15:08:21 +02:00
Vladimir Zidar
e8bccefb9d
LP-512 Added missing HoTT Bridge and Frsky Sensor Hub to list of protocols on PikoBlx, Spracingf3 and Spracingf3 evo
2017-05-30 15:08:09 +02:00
Vladimir Zidar
916188dd11
LP-512 Added support for tinyFISH FC
2017-05-29 21:12:28 +02:00
Vladimir Zidar
6fb9a4abc7
LP-512 fix f3 pios_rtc.c (squash this in previous commit)
2017-05-29 17:03:21 +02:00
Laurent Lalanne
5a3dcf2018
LP-486 GPSv9 : Enable BL and EF firmware build
2017-05-27 01:38:37 +02:00
Vladimir Zidar
b523f69f0e
LP-512 Addressed most of the PR comments.
2017-05-26 01:06:31 +02:00
Vladimir Zidar
58e19db08f
LP-512 Provide missing PIOS_DELAY_GetRaw() prototype for simposix target.
2017-05-25 22:08:40 +02:00
Vladimir Zidar
fb69978fda
LP-512 nucleof303re - bootloader fix and misc changes
2017-05-25 22:08:39 +02:00
Vladimir Zidar
77918c51a1
LP-512 Uncrustify
2017-05-25 22:08:39 +02:00
Vladimir Zidar
6eb97ed213
LP-512 SPRacingF3Evo: Allow PPM on UART2 pins only.
2017-05-25 22:08:38 +02:00
Vladimir Zidar
5b5546a1cb
LP-512 F3: implemented missing ioctls PIOS_IOCTL_USART_SET_IRQ_PRIO and PIOS_IOCTL_USART_GET_DSMBIND
2017-05-25 22:08:38 +02:00
Vladimir Zidar
faf0ae7c04
LP-512 PikoBLX board added
2017-05-25 22:08:38 +02:00
Vladimir Zidar
ae1c3612e4
LP-512 Bring back accidentally removed function
2017-05-25 22:08:37 +02:00
Vladimir Zidar
90e6ab8ef6
LP-512 SPRacingF3 Evo: Added PPM in to all UARTs. Untested.
2017-05-25 22:08:37 +02:00