1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

306 Commits

Author SHA1 Message Date
James Cotton
1365542103 OP-493: Populate the Accessory Desired from TX 2011-06-05 15:38:57 -05:00
James Cotton
3e5d02cbaf OP-152: Abstract the CRC code out of uavtalk to allow it to be reused (PT -
feel free to test moving this to the hardware CRC unit)
2011-06-04 18:36:26 -05:00
James Cotton
efe50012cb Merge branch 'spektrum_rtc_supervisor' 2011-05-29 17:19:48 -05:00
sambas
17fb31a7fa Spektrum rtc supervisor working, tested on CC and all outputs are activated. Needs review and testing before merge. 2011-05-29 14:52:22 +03:00
Stacey Sheldon
5be27fda83 coptercontrol: Increase stack size for system module
When running flight software from master (cf74908), my
config was pushing the system module stack usage to within
16 bytes of its limit.  This triggers a stack overflow
alarm which prevents the quad from arming/flying.

This change increases the available stack size such
that there are 72 bytes of stack free (a previously stated
safe margin) when my quad is sitting idle and unarmed on
the bench.
2011-05-29 00:12:26 -04:00
Stacey Sheldon
4da671fc82 build: change firmware files from .opf to .opfw extensions 2011-05-25 00:20:02 -04:00
Oleg Semyonov
66804076b8 build: fix release/Makefile for *.opf files and changed targets 2011-05-24 23:49:51 -04:00
Stacey Sheldon
91cb294730 build: remove redundant PHONY for size target 2011-05-24 01:10:40 -04:00
Stacey Sheldon
0eb92fad91 build: refactor jtag program and add jtag wipe target
Macros for JTAG program and wipe for each target are now
provided in firmware-defs.mk.

The _wipe target for each firmware and bootloader image will
erase either the bootloader (bl_*_wipe) or firmware (fw_*_wipe)
bank.
2011-05-24 01:10:31 -04:00
Stacey Sheldon
9973fda23b build: define bootloader and firmware bank spans
The board-info.mk files now define the start and size
of the bootloader and the firmware banks.
2011-05-24 01:03:01 -04:00
Stacey Sheldon
6e406c0232 build: remove all remaining use of -DUSE_BOOTLOADER
The USE_BOOTLOADER compile flag was only being used
to determine where the ISR vector table was located.

Provide this explicitly from the linker since it knows
exactly where it is putting the ISR vector table.
2011-05-23 18:21:42 -04:00
Stacey Sheldon
0a67730d0f build: refactor fw, bl and bu rules
- New macros for fw, bl and bu rules in top-level make
- Per-board info factored into make/board/*/board-info.mk
- Per-board info now shared btw. fw, bl and blupd for each board
   - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE
   - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX
   - START_OF_BL_CODE, START_OF_FW_CODE
- blupd_* goals renamed to bu_*
- all_blupd goal renamed to all_bu
- firmware goals renamed to fw_*, board name goals are preserved
- bu_*_program now writes updater to correct address for all boards
- BL updater firmware builds now produce .opf format including
  version info blob.
- BL updater firmware name now includes board name.
- INS makefile brought up to date w.r.t. linker scripts
2011-05-23 18:21:42 -04:00
Stacey Sheldon
6ec6425f5e build: build opf images including firmware + version blob 2011-05-22 10:55:13 -04:00
Stacey Sheldon
2044d777e6 coptercontrol: always enable -g debug symbols
This does not affect the size of the image or the RAM
used by the firmware image.  All debugging symbols are
stripped from the elf file during the conversion to a
.bin file.
2011-05-16 08:35:41 -04:00
Oleg Semyonov
39d4f23b67 Merge branch 'master' into OP-483_os_release-packaging 2011-05-15 21:32:20 +03:00
James Cotton
ae2759a957 Merge branch 'bugfix-flight' 2011-05-15 12:50:45 -05:00
Oleg Semyonov
bac95dae11 OP-483: get rid of -D install switch (doesn't work on Mac) and use mkdir -p instead 2011-05-14 23:17:08 +03:00
James Cotton
2087441006 OP-216: Make the object manager use new flash fs for objects 2011-05-14 14:23:02 -05:00
zedamota
a38fbe6cea Make CopterControl firmware non functional when using the ERASE_FLASH=YES compile flag 2011-05-14 19:03:31 +01:00
Oleg Semyonov
37868a4c10 OP-483: add install target for firmware
make INSTALL_DIR=dir INSTALL_PFX=pfx INSTALL_SFX=sfx install
installs binary file into specified install directory adding
optional prefix and/or suffix.
2011-05-13 11:25:32 +03:00
James Cotton
5d28276c49 Reshuffle memory allocation on CC after FlightStatus object introduced 2011-05-11 17:35:52 -05:00
James Cotton
fb8417a0ff Merge remote-tracking branch 'origin/op_475_476_calibrate_during_arming' 2011-05-09 09:23:16 -05:00
Stacey Sheldon
29ec2f198b build: convert all app loads to require bootloaders
This change is made up of a number of tightly coupled
changes:
 - Deprecate the use of the USE_BOOTLOADER command-line
   option.  It is now hard-coded in each Makefile.
   Overriding it on the command line is not allowed.
 - Split apart the memory declaration and the section
   declaration in all linker files (*_memory.ld and
   *_sections.ld).
 - Describe the split between bootloader and app sections
   of flash in each board's _memory.ld file.
 - Change program target to selectively erase flash so
   that the installed bootloader is preserved across even
   JTAG programming operations.
 - All elf files are built with debug symbols and are not
   stripped.  This should help debugging with gdb.  The
   images programmed on the boards are all .bin files now
   which do not include symbols.
2011-05-08 12:40:29 -04:00
Stacey Sheldon
7e99419c8a build: Add support for %.bin.o generation
The .bin.o rule places the contents of a raw .bin file
into an .o file wrapped within fixed symbols for start
and end.  This can be used to embed a binary file inside
of an executable.

The symbols for the embedded binary blob are:
 _binary_start
 _binary_end
 _binary_size

NOTE: The way the .bin.o rule is currently written, you
can only embed one binary blob in an executable since the
symbol names will collide if you add multiple blobs.  This
limitation is easily removed later if necessary.
2011-05-07 18:05:50 -04:00
James Cotton
8e06eb3162 Get the "IDLE_NO_LOAD" level closer for CC with optimizations on, but it would
be great if someone actually calibrated this for me!
2011-05-07 15:07:14 -05:00
James Cotton
80c839d5bb OP-475: Starting to use the new FlightStatus object 2011-05-07 13:17:21 -05:00
James Cotton
d3247c9946 Remove unused code from coptercontrol.c 2011-05-07 06:56:20 -05:00
James Cotton
1f36e00287 Merge remote-tracking branch 'origin/OP_442_OP_437_PT_Dreamer' 2011-05-02 03:34:09 -05:00
David Buzz Carlson
c93ab7e723 Change CC, OP MB, and AHRS to use bootloader by default.
Also change AttitudeActual to update at 10Hz rather than 2 Hz.  The increased bandwidth is minimal and the resulting "polish" that it adds to the look-and-feel of the GCS is signifcant.
2011-05-02 00:50:42 -07:00
zedamota
5dd8a3eea2 Fix a silly mistake on the CC erase_flash compile flag. 2011-05-01 20:10:27 +01:00
zedamota
3d209f2166 Fix to erase option. Erase must be performed after board initialization. 2011-04-30 14:17:44 +01:00
zedamota
8dd46e1465 Should fix the CC showing as OP.
Added a compile flag to make a CC fw version that will erase flash.

Signed-off-by: zedamota <josembarros@hotmail.com>
2011-04-29 23:38:26 +01:00
zedamota
6172e45c0d Should fix CopterControl showing as Openpilot on DropDown box. 2011-04-29 21:42:59 +01:00
James Cotton
5f776f0b58 Merge branch 'master' into OP-439_CorvusCorax_Bootloader-Makefile-and-OpenOCD-config-for-Linux 2011-04-27 23:41:35 -05:00
James Cotton
819bc9d441 Merge branch 'master' into OP-430_Ligi_UAVTalk-Code-Review 2011-04-26 12:49:32 -05:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
2011-04-24 10:19:00 -05:00
Corvus Corax
ee7179bd53 OP-439 unified OpenOCD config for mac os x and Linux, Makefiles adapted accordingly 2011-04-24 12:10:33 +02:00
marcus bueschleb
06ac71b784 do not force telemetry update when alarm is changed - this was bypassing the MetaData of the UAVObject and seem to be a relict from times where no metadata existed - now doing it the MetaData way with onchange as updatemode - see http://forums.openpilot.org/topic/4208-systemalarms-bypassing-updatemode-from-metadata/ and OP-431 2011-04-24 03:43:05 +02:00
Corvus Corax
0a05896146 CopterControl: Added dependency: pios_bl_helper 2011-04-23 19:56:48 +02:00
sambas
dabc33c71c OP-22 Flight/PiOS: fix for 11ms framerate, Spektrum supervisor timer must have atleast one interrupt between frames
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3134 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 14:51:39 +00:00
edouard
f19b0efc6f CC-40 Implemented support for FirmwareIAP on Coptercontrol: you can now use the "Halt" command on the uploader gadget.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 13:50:13 +00:00
chebuzz
183ca03cc9 CC/Makefile - Make I2C conditional compilation, disabled by default. Unterminated I2C can cause boot process to hang. Thus disabling I2C by default should help to avoid problems in the future.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3059 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 09:18:21 +00:00
edouard
aa097ec400 OP-339 Update USB descriptors on CopterControl and OpenPilot to reflect the new convention.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3015 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 07:21:01 +00:00
peabody124
8930ec01de OP-313 Quaternion based stabilization, gets rid of lots of checking angle
signs, should be stable for all orientations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2932 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-02 01:25:34 +00:00
peabody124
3e17c2ff55 OP-312: Create a StabilizationDesired object that is the generic input to
Stabilization, carries the desired rate or attitude as well as a flag on how to
intepret it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2930 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-02 01:25:27 +00:00
osnwt
899c1fe0bf Moved CPU and heap alarm thresholds into pios_config.h.
Fixed heap thresholds for the CC (prevented arming).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2886 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 11:46:39 +00:00
stac
6700a74782 makefile: refactor makefiles and clean up output
This significantly reduces the amount of duplication
across the various firmware makefiles.

The new firmware-defs.mk file should contain only
macros/declarations that will apply to all firmware
makefiles.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2854 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 04:18:53 +00:00
peabody124
52f09e5d55 Add compile time flag (USE_SPEKTRUM) to enable spektrum support until the
dynamic switching is done.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2778 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 17:43:44 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested.
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
peabody124
a3ba9c3781 CC-21 Make it possible to enable Spektrum on CC, although it eats up S6 in
order to free a timer.  Mode PIOS_DELAY (not working cleanly) to TIM3 because
Spektrum resets TIM2 count.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:45 +00:00
peabody124
6ac2ddb0c1 CC: Make default build non-debug. This leaves a bit more RAM overhead.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2752 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:24 +00:00
peabody124
682b49df44 CC: Increase the SPI clock rate to minimize time spent in that routine
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2751 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:21 +00:00
peabody124
56d4d54a97 CC: Increase the memory for the modules after removing PriTxTask from CC and
also increase the telem queue to decrease event errors (can be reverted later if
we need the memory back)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2730 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 10:52:59 +00:00
peabody124
e5b26bc67d More memory tweaks to keep CC flowing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2709 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:49 +00:00
peabody124
fedadb1275 CC-8: Move the queue registration into the ADC PIOS driver to allow other
functions to use it easily

Conflicts:

	flight/Modules/Attitude/attitude.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2707 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:43 +00:00
peabody124
cf2e9fb349 Memory: Also allow overriding Stabilization stack size
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2690 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 08:57:34 +00:00
peabody124
877bcca880 Delete hardcoded min and max servo PWM times, they weren't used. Use the
configuration settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2676 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 21:04:58 +00:00
peabody124
d33d044088 Revert "Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures""
Putting Corvus patch back in.  Need to delete uavobjects-synthetics directory
for this to work.

This reverts commit 9cd98bec8fb5e0679c625eb256a94d161a8ce345.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2671 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 15:46:59 +00:00
peabody124
f93ed5f01f CC Module memory: Make it clean for CC to override the stack sizes of modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2668 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:35 +00:00
peabody124
b1e4b65f3d CC-1 Bigger oversampling window for CC sensor data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2667 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:31 +00:00
peabody124
1c6b51b704 UAVObjects/AttitudeSettinsg: Object for CC to tune the attitude estimation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2666 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:26 +00:00
peabody124
3f088bed8d CC-9 1. Improve the timings of the attitude estimation
2. Disable FirmareIAP module in CC (somehow causes lockups when also using vTaskDelayUntil in Attitude WTF)
3. Make the SPI bus run a little faster so we can handle the 3200 Hz from accel
while running the filter at 333 Hz

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2664 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:19 +00:00
peabody124
97acaa2402 CC-15 Gets settings saved to flash chip on CC using crude sector based storage.
Sector based on Object ID so could overlap :-(.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2662 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:12 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:04 +00:00
peabody124
063c58e7c0 CC-12 Enable Watchdog on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2653 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:32 +00:00
peabody124
bbbdea26b9 Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures"
Note: This patch did not build after a clean build.

This reverts commit 7e75b5d16481a32689433c868b67916816d8b9fb.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2651 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:56:02 +00:00
peabody124
29ad7b3017 CC-13 Get FirmwareIAP reset working on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2649 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:54 +00:00
corvus
c2ba1f517b Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures
On architectures supporting automatic initializing, flight/UAVObjects/uavobjectsinit_linker.c is used
On architectures NOT supporting automatic initializing, an uavobjectgenerated file build/uavobject-synthetics/flight/init/uavobjectsinit.c is used
build/uavobjects-synthetics/flight/uavobjectsinit.c went away, so that a wildcard include in the Makefile will not include the (wrong) initialisation code in either version



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2640 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 20:37:11 +00:00
stac
b5426e09d0 uavobj: Convert CC over to use autogenerated uavobjinit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2631 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 22:46:51 +00:00
corvus
04d3a9649d CopterControl: reverting previous commit - doesn't work on windows due to command line length limitations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 16:15:16 +00:00
corvus
000a45f1bf CopterControl - Build CopterControl with a Makefile specified subset of UAVObjects - code generation by uavobjgenerator
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2622 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 12:36:41 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 09:25:30 +00:00
peabody124
92dd78db51 OP-256 PIOS/PWM: Disable from the pios_board.c file when not using PWM
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 23:17:39 +00:00
peabody124
1daabba5c1 Build: Change the lower makefiles to use forward slashes but also create
directories on
windows

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2585 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 20:01:06 +00:00
peabody124
ba1d519192 Get CC working with new file locations and also fix AHRS build to work with
these locations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2581 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 08:14:00 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:14 +00:00
peabody124
d4b4a6ca37 CC-3 Modules/CCAttitude: Add oversamplign to the accel data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2576 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:08 +00:00
peabody124
21e3441f00 CC-3 Set gyro to downsample 10x to 250 Hz
Conflicts:

	flight/CopterControl/System/inc/FreeRTOSConfig.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2575 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:05 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:54 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure.
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:45 +00:00
peabody124
99f2f3c68b OP-291 CC Servo configuration: Gets S5 and S6 working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2566 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:38 +00:00
peabody124
80c97ddfd0 CC-2 CC-3 Modules/CCAttitude: Flip the up-down convention of the board
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2563 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:29 +00:00
peabody124
c55d40bdbc CC-3 Setting up monolithic task template to keep code size down. Importantly
switch to heap_1.c which saves a lot of money.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2561 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:22 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 03:40:21 +00:00
peabody124
56dd0569b8 CC-2 Complimentary filter working on copter contol, nice attitude
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2475 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:43 +00:00
peabody124
18deba48c1 CC-6 PIOS/ADXL345: Helper functions for the ADXL345 chip. Need to add
semaphores for sharing the bus between the flash chip and this though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2473 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:37 +00:00
peabody124
211585c7d7 CC-1 Modules/CCAttitude: Initial reads from accelerometer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2472 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:34 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:39 +00:00
peabody124
ab75e8117f OP-265 CC: Getting GPIO lines working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2443 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:34 +00:00
peabody124
33f3500e64 CC-3: New module for copter control
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2441 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:27 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:22 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 02:15:19 +00:00
peabody124
94ff276522 OP-265 CC: Tweaking objects included and the memory requirements
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2426 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:49 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:47 +00:00
peabody124
de51286524 OP-266: Rename openpilot.c to coptercontrol.c for CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2424 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:44 +00:00
peabody124
c59a1ff018 OP-265 OP-266: FreeRTOS configuration per project because of available heap
size (may eventually need to be per revision if we get bigger ram).  Typo in a
the ifdefs to get allow disabling SDCARD

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2423 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:42 +00:00
peabody124
ea851803af OP-266 CopterControl: Continue trying to strip out as much as possible to get
it to fit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2422 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:39 +00:00
peabody124
2c335edd7f OP-266 CopterControl: For now no USB support for code size
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2419 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:32 +00:00
peabody124
79caad654b CopterControl: Don't need altitude sensor support
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2418 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:30 +00:00
peabody124
9cf3ee9fb3 OP-267 Flight/UAVObjectManager: Make all references to DFS function depend on
PIOS_USD_SDCARD.  However, this needs to be cleaned up and abstracted out of
the UAVObjectManager who shouldn't care about the storage layer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2417 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:27 +00:00
peabody124
940792db5c OP-265 CopterControl: Fork main OpenPilot directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2416 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:24 +00:00
peabody124
fc54159369 OP-265 Flight reorganization of UAVObjects and Modules up a directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2415 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:19 +00:00