rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
5,795 Commits 5 Branches 8 Tags 266 MiB
cd311642dd
Commit Graph

2866 Commits

Author SHA1 Message Date
Brian Webb
7082eda175 Fixed returning status for currently paired modem. 2012-05-15 20:11:52 -07:00
Brian Webb
93ec7c11a6 Fixed race condition on getting packets. 2012-05-15 19:38:14 -07:00
James Cotton
af8d65616e Comment out some unused variables in the PIOS_ADC structure for now since they 
were consuming lots of memory.  Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
 2012-05-15 03:48:32 -05:00
James Cotton
bbb14f5f14 Trying to get F4 PIOS_ADC working. Changed from previous implementation timed 
by another timer to running continuously.  May go back to the previous since no
need to get tons of data.
 2012-05-15 03:19:44 -05:00
James Cotton
39ce3cea17 Clean up the battery module 2012-05-15 03:08:18 -05:00
James Cotton
0a7f5fd5d3 Enable battery code again 2012-05-15 00:38:11 -05:00
Brian Webb
bb491b8a3f Fixed bootloader on PipX. 2012-05-14 06:57:16 -07:00
Brian Webb
31069d8858 Small mod to flash saving. 2012-05-13 20:20:17 -07:00
Brian Webb
563b454693 Fixed compiling of PipX bootloader. 2012-05-13 20:19:04 -07:00
Brian Webb
a3269aaf2f Reverted some file permission changes. 2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f Fixed some bugs with setting PairIDs in GCS. 2012-05-13 14:24:00 -07:00
Brian Webb
dd03b0b159 Added reporting of stats from the remote modem. 2012-05-13 09:34:21 -07:00
Brian Webb
ec67742ff6 Added configuration of COM ports on PipX. 2012-05-12 13:16:36 -07:00
James Cotton
46fc5fa4fb Create a PathPlannerSettings object and move the PathMode setting to there. 
Also add a (temporary) field to allow storing some custom paths to select on
the fly.  Later will be replaced with some code to fetch from the flash chip.
 2012-05-12 13:12:57 -05:00
James Cotton
836e34a483 Change revo sensors to update at 500 Hz and make sure in all cases it waits for 
the relevant queue to provide data.  Also disable the quaternion stabilization
flag.
 2012-05-12 13:12:56 -05:00
James Cotton
65065f2588 Fix the ADC code on the BL for revolution 2012-05-12 13:12:56 -05:00
James Cotton
c660dd17f0 Correct comment in CC settings for MPU6000 and disable I2C support 2012-05-12 13:12:55 -05:00
James Cotton
848f1b0e29 For some reason the gyro needs 300 ms after reset in order to work after the 
bootloader jumps to code.  Nothing in datasheet to imply what.
 2012-05-12 13:00:51 -05:00
James Cotton
2ca3cde83f Improve EKF initialization. For some reason we must read an extra mag sample 
when power up value of attitude algorithm is EKF.  I don't understand why the
first mag value is bad.
 2012-05-12 13:00:51 -05:00
James Cotton
98655aacc8 Fix initialization of the complimentary filter where it didn't get the right 
initial dT
 2012-05-12 13:00:50 -05:00
zedamota
817ce9327f flight - fix pipxtreme bootloader compile 2012-05-12 12:57:15 +01:00
Brian Webb
1f5dbcf57c Mostly complete PipX configuration GUI. 2012-05-11 17:51:18 -07:00
James Cotton
406b5a00f5 Make OSX simulator more efficient 2012-05-08 03:12:35 -05:00
James Cotton
4ec4edd15c When enabling position hold altitude mode take the throttle from before as the 
"hover" throttle
 2012-05-08 03:12:14 -05:00
James Cotton
2857b58f8e Migrate path planner from position desired to path desired 2012-05-08 03:04:44 -05:00
James Cotton
37bb2cfb77 Finish getting rid of PositionDesired in favor of PathDesired and add the 
ability to move the magic waypoint with the transmitter
 2012-05-08 02:42:58 -05:00
James Cotton
a8bdd4a44a Coalescene PositionDesired and PathDesired into PathDesired and add a mode 
field to indicate how it should be interpreted.
 2012-05-08 02:29:58 -05:00
James Cotton
27d1c4be93 Extend list of airframe types for VTOL guidance 2012-05-08 02:29:58 -05:00
James Cotton
c723ae3720 Reduce the CPU usage of OSX simuluator 2012-05-08 02:29:58 -05:00
James Cotton
cbedb5b53b Move Guidance to VtolPathFollower to make room for FWPathFollower 2012-05-08 02:29:50 -05:00
James Cotton
0f2c41ac5d Merge branch 'revolution' into navigation 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2012-05-07 21:53:10 -05:00
James Cotton
6aa7142f5e When guidance finds an incorrect airframe, delay 100ms to avoid hammering the 
alarms
 2012-05-07 12:55:35 -05:00
Sambas
dedbbec8f0 Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board. 
USB interrupt fix.
Heap warning critical sizes backwards.
 2012-05-07 12:51:07 -05:00
Oleg Semyonov
a3906aa7ea Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc 2012-05-07 16:09:35 +03:00
James Cotton
d8c288f223 Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-07 01:59:38 -05:00
James Cotton
a40a0b0e31 Small fix to be able to build CC for Revo branch and to include revo in 
package.
 2012-05-07 01:55:52 -05:00
Brian Webb
454144f46c Pairing and saving settings working. 2012-05-06 20:47:21 -07:00
Brian Webb
352471857f Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread. 2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b Fixed failed merge with next. 2012-05-06 12:38:13 -07:00
Brian Webb
3cf4fe6512 Reverted some USB changes. 2012-05-05 10:10:40 -07:00
Brian Webb
480371a43e Resolving merge with origin/next 2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463 Merged latest origin/next. 2012-05-05 09:40:44 -07:00
James Cotton
6c0dc80978 Shuffle more stack sizes around 2012-05-05 11:33:47 -05:00
Werner Backes
22df8310c4 Fixed typo in comment 2012-05-05 11:10:53 -05:00
Werner Backes
f52f5b3d83 Don't process RMC sentences that are flaged as 'void' 2012-05-05 11:10:45 -05:00
Werner Backes
6b463e5c9e Check GGA NMEA sentence for no/invalid fix flag 2012-05-05 11:10:38 -05:00
Werner Backes
217860c187 Check for empty fields during lat/lon conversion (invalid GPS fix) 2012-05-05 11:10:32 -05:00
James Cotton
513c36f19a Update the F4 ADC to compile again. Still not fully compliant with API but 
then again API is not great and unused currently so no rush.
 2012-05-04 21:37:46 -05:00
James Cotton
3ef01569b8 Merge remote-tracking branch 'origin/kenz/PT_UI_fixes' into next 
Conflicts:
	flight/OpenPilot/System/openpilot.c
	shared/uavobjectdefinition/positionactual.xml
	shared/uavobjectdefinition/positiondesired.xml
	shared/uavobjectdefinition/velocityactual.xml
	shared/uavobjectdefinition/velocitydesired.xml
 2012-05-04 13:21:23 -05:00
James Cotton
a9b8e74b0d Disable LEDs on the bootloader update as without knowing the particular 
hardware revision it cannot know which pios_led_cfg_ structure to use.
Possibly this should be abstracted further into board_hw_defs to create
functions like board_init_led.

Also the BU should probably compare the hw_revision of the original and new
bootloader to make sure the user doesn't break their board.
 2012-05-04 08:53:14 -05:00
James Cotton
d93bf5d2a2 Clean up the XCode project 2012-05-03 22:20:00 -05:00
Brian Webb
44d95003f3 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-05-03 17:56:08 -07:00
James Cotton
3155324384 Merge branch 'next' into cc3d 
Conflicts:
	Makefile
	ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
	shared/uavobjectdefinition/ahrscalibration.xml
	shared/uavobjectdefinition/ahrssettings.xml
	shared/uavobjectdefinition/attituderaw.xml
 2012-05-03 16:31:49 -05:00
James Cotton
07a5d98020 Merge remote-tracking branch 'origin/Brian-Metadata-Mods' into next 2012-05-03 08:50:24 -05:00
Brian Webb
249ededcfd Added responding to OBJ_REQ and sending ACK/NACK on PipX. 2012-05-02 20:51:29 -07:00
Brian Webb
22f48ce8b0 Exposed the Send ACK/NACK function in UAVTalk. 2012-05-02 20:42:37 -07:00
Brian Webb
30d63b5b12 Merged USB CDC updates. 2012-05-02 06:45:24 -07:00
Brian Webb
8da4b9c745 Merge remote-tracking branch 'origin/stac/pt-win-vcp-fix' into Brian-PipXtreme-V2 2012-05-02 06:42:30 -07:00
Brian Webb
290acf0398 Fixed watchdog timeouts. 2012-05-01 20:48:35 -07:00
Brian Webb
217aad8c37 Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling. 2012-05-01 19:14:58 -07:00
James Cotton
3f63051df8 PiOS ADC: This could still use a lot of cleanup and needs to be implemented in 
the non-FreeRTOS case but now the ADC device is allocated dynamically which
means CC3D won't waste heap on it.
 2012-05-01 11:11:31 -05:00
James Cotton
311cbe37d2 Reenable PIOS_ADC for coptercontrol 2012-05-01 00:30:41 -05:00
Brian Webb
84a19ebeab Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-04-28 19:30:35 -07:00
Brian Webb
25ffb99cee Added initialization of flash eeprom for saving settings to PipX. 2012-04-28 19:29:56 -07:00
Brian Webb
1048eb7e2c Added pios_eeprom for saving settings. 2012-04-28 19:29:25 -07:00
James Cotton
fb53d5621a Change the magKp term (hardcoded still) for revo complimentary filter so it 
tracks magnetic north when homelocation is set.
 2012-04-22 19:01:41 -05:00
James Cotton
2890fcdc9f When in complimentary filter mode use GPSVelocity so event system doesn't have 
warning.
 2012-04-22 19:01:18 -05:00
Corvus Corax
b97b0617aa bugfix, use correct variance parameter on z velocity 2012-04-22 18:43:17 -05:00
James Cotton
f06439ecf5 Fix a bug in calculating air temperature in baro sensor when it goes below 20 
deg C.
 2012-04-22 18:43:07 -05:00
Stacey Sheldon
63285ea451 bu: remove LED support from bootloader updaters 
Bootloader updaters were all broken due to recent
changes in LED configuration handling.  Removing
LED support from the BU loads allows them to build
again, but they provide no feedback about when they're
finished writing flash.
 2012-04-22 18:42:58 -05:00
Stacey Sheldon
2ec197298b gpio: stop enabling pull-ups on all GPIOs in bootloader 
The bootloader has been enabling pull-ups on all GPIO
pins during early init.  These pull-ups are disabled
immediately before jumping to the firmware.  This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
 2012-04-22 18:42:53 -05:00
Stacey Sheldon
14cc9ef57c ppm: adjust min frame pulse width for 8ch x 18ms frames 
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.

With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels.  Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.

Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
 2012-04-22 18:42:45 -05:00
Brian Webb
aab47d6ed4 Final updates to throttled mode and further memeory reduction in the object manager and event dispatcher to reflect smaller data sizes in metadata. 2012-04-22 14:56:26 -07:00
Brian Webb
ed1937958e Changed PipX UAVTalkProcessInputStream calls to UAVTalkProcessInputStreamQuiet. 2012-04-22 08:45:01 -07:00
Brian Webb
fb6dedad2b Added UAVTalkProcessInputStreamQuiet function, which is a version of UAVTalkProcessInputStream that only processes (does not sens or receive). 2012-04-22 08:43:51 -07:00
Brian Webb
f726cc6a9d Added a RTC supervisor timer to RFM22B driver. 2012-04-21 18:31:49 -07:00
Brian Webb
5a2a3ad49b Fixed changes to UAVTalkProcessInputStream. 2012-04-21 16:54:35 -07:00
Brian Webb
eb6f175af4 Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual). 2012-04-21 11:59:14 -07:00
Laura Sebesta
6feb198437 Improved comment message, aimed at beginners. 2012-04-20 17:10:16 -04:00
Stacey Sheldon
b255e7caaa hid+vcp: Add Windows INF file for CDC on OpenPilot boards 2012-04-20 09:02:40 -04:00
Stacey Sheldon
41d4ba4b1a hid+vcp: change default USB descriptor to HID+VCP 
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.

VCP will is known to not work on WinXP without service pack 3.
 2012-04-20 08:39:04 -04:00
zedamota
4968df183a Working compliant VCP+HID descriptors for Windows. 2012-04-20 08:38:24 -04:00
Brian Webb
19166cc830 Added UPDATEMODE_THROTTLED to UAVObjects update modes. 2012-04-18 18:47:13 -07:00
Corvus Corax
1c3dc9c9e1 Airspeed: fixed calculation math - no more zero zone 2012-04-18 14:41:41 +02:00
Corvus Corax
d125abf335 Baro calibration 2012-04-18 10:48:31 +02:00
Brian Webb
62c5036220 Added PipXStatus and PipXSetting UAVobjects and some initial support for them. 2012-04-17 17:36:05 -07:00
Corvus Corax
3da88601a1 Airspeed module works, needs conversion 2012-04-17 20:32:56 +02:00
Corvus Corax
317cff10dd debug code added - revert this when no longer needed 2012-04-17 18:59:46 +02:00
Corvus Corax
edf26d15e6 Airspeed: some more fixes 2012-04-17 16:38:53 +02:00
Corvus Corax
c5a6ed7486 add missing headers and makefile entries 2012-04-17 16:25:39 +02:00
Corvus Corax
cf3f0b4226 Merge branch 'james/revolution' into stac/etasv3 2012-04-17 15:57:37 +02:00
Corvus Corax
5159d2029b new airspeed module - still needs matching PIOS driver from stac 2012-04-17 15:54:05 +02:00
Stacey Sheldon
ad75e354eb etasv3: Add etasv3 driver to revolution 2012-04-17 09:39:47 -04:00
Stacey Sheldon
6a37e433b6 etasv3: Add driver for Eagle Tree Airspeed Sensor v3 2012-04-17 09:39:00 -04:00
Stacey Sheldon
853600a2ef i2c: enable flexiport i2c on revolution 2012-04-17 09:38:27 -04:00
Brian Webb
78c7416bda Added returning of UAVTalk state from UAVTalkProcessInputStream 2012-04-16 20:21:00 -07:00
Stacey Sheldon
7f03a77492 bu: remove LED support from bootloader updaters 
Bootloader updaters were all broken due to recent
changes in LED configuration handling.  Removing
LED support from the BU loads allows them to build
again, but they provide no feedback about when they're
finished writing flash.
 2012-04-16 15:09:10 -04:00
Stacey Sheldon
62fb009acd gpio: stop enabling pull-ups on all GPIOs in bootloader 
The bootloader has been enabling pull-ups on all GPIO
pins during early init.  These pull-ups are disabled
immediately before jumping to the firmware.  This transition
results in all servos seeing a wide pulse as the board
resets making them jerk sideways aggresively and then snap
back to neutral.
 2012-04-16 14:41:25 -04:00
Stacey Sheldon
5ca4ec7934 ppm: adjust min frame pulse width for 8ch x 18ms frames 
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.

With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels.  Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.

Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
 2012-04-16 14:33:28 -04:00
James Cotton
ad074aee4b Fix nasty bug in guidance where I missed some breaks 2012-04-16 08:59:25 -05:00
James Cotton
a7ba6d96c1 Allow guidance to run purely off raw GPS data 2012-04-15 16:23:34 -05:00
James Cotton
050c756d54 Merge branch 'revolution_path' into testing 2012-04-15 12:34:31 -05:00
James Cotton
4928cbba44 Merge branch 'sim' into testing 2012-04-15 12:34:27 -05:00
James Cotton
59da9deffb Merge remote-tracking branch 'revo/D-Lite/ubx-parser' into sim 2012-04-15 12:33:54 -05:00
James Cotton
6a094ac326 Increase stack for the path planner 2012-04-15 12:31:50 -05:00
Corvus Corax
88f7567247 change to GPS: do not update UAVObject more than 1ce per cycle 2012-04-15 19:17:03 +02:00
James Cotton
85852df00b Make simulation produce data asynchronously for testing and add random accel 
bias
 2012-04-15 11:51:42 -05:00
James Cotton
08fd08deb8 Fix some compiler warnings in guidance code 2012-04-15 11:51:26 -05:00
James Cotton
1559eeb2e1 Use GPSVelocity updates when they are available instead of timing based on 
GPSPosition
 2012-04-15 11:50:56 -05:00
James Cotton
6e215bd029 Updating INS Pos/Vel variance includes the vertical velocity 2012-04-15 11:50:11 -05:00
James Cotton
b71e9fc9dc Create simulated OveroSync module which simply drops updates to log file 2012-04-14 22:01:33 -05:00
unknown
0b7538c3fe Constants changed to float for better portability. 2012-04-15 01:28:31 +02:00
James Cotton
9a2e0b071c Revert "Allow simulated quadcopter to include GyroBias in the artificial sensor data." 
This reverts commit 212a10bcd4.
 2012-04-14 17:20:01 -05:00
James Cotton
212a10bcd4 Allow simulated quadcopter to include GyroBias in the artificial sensor data. 2012-04-14 14:52:56 -05:00
James Cotton
af02eb6517 Merge branch 'sim' into testing 
Conflicts:
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-04-14 14:40:43 -05:00
James Cotton
267e9fa87c Merge branch 'revolution' into testing 2012-04-14 14:40:11 -05:00
James Cotton
a86e75bc99 Merge branch 'revolution' into sim 2012-04-14 14:12:03 -05:00
James Cotton
deb3336729 Make sure for revolution all the GPS objects are always initialized even if 
there is no GPS port.  Otherwise connecting to relevant queues will fail.
 2012-04-14 14:02:20 -05:00
James Cotton
b7c3b1fdd1 Make the simulation provide GPSVelocity object since this is critical for EKF 
now
 2012-04-14 14:01:42 -05:00
James Cotton
ce6def870b Add feedforward component to guidance 2012-04-14 13:38:10 -05:00
James Cotton
be21ec441e Add ability to run guidance based on raw GPS velocity instead 2012-04-14 13:34:30 -05:00
James Cotton
1a98a46606 Merge branch 'revolution_ubx' into sim 2012-04-14 12:10:23 -05:00
James Cotton
5d160860a3 Fix from Corvus for gyro bias from EKF 2012-04-14 12:09:12 -05:00
James Cotton
3e2feb64cf Fix bug limiting maximum velocity desired 2012-04-14 10:49:54 -05:00
James Cotton
b0ef456ccb Kickstart MPU6000 if there is no data 2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade Cover an edge condition for the MPU6000 IRQ not firing 2012-04-13 19:37:30 -05:00
Brian Webb
4936cd8fd2 Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX. 2012-04-10 20:22:53 -07:00
James Cotton
a1351fcdbe Make the path velocity come from the waypoint. 2012-04-10 02:56:10 -05:00
James Cotton
a42d756b3e Add path navigation mode to the path planner module. I don't like how this is 
done because the mode is in the settings so can't be command from path planner.
I.e. it would be nice to be able to say do these paths then go to position hold
mode.
 2012-04-10 02:51:50 -05:00
James Cotton
dfa18eaef1 Deal with the case where path start and endpoints are the same to avoid NAN. 2012-04-10 02:49:19 -05:00
James Cotton
1aec5b8deb Add altitude control to the path navigation 2012-04-10 01:59:26 -05:00
James Cotton
26b73e3c8b Add path navigation mode to guidance. Works well in simulation. 2012-04-10 01:48:03 -05:00
James Cotton
136bbe3814 Update the EKF code to use the GPSVelocity 2012-04-09 19:03:21 -05:00
James Cotton
dbcb47e249 Merge branch 'D-Lite/ubx-parser' into revolution_ubx 2012-04-09 17:34:34 -05:00
Werner Backes
4ede7a8af6 Experimental u-blox binary data format parser. See "u-blox 6 
Receiver Description" for reference. Currently supports NAV-VELNED
message only and populates it to the GPSVelocity UAVObject.
 2012-04-09 23:14:34 +02:00
Werner Backes
422944ce29 Experimental extension to the GPS stream parser to extract u-blox 
binary data format. See "u-blox 6 Receiver Description" for
reference. GPS data stream may carry mixed NMEA and UBX data.
 2012-04-09 23:12:24 +02:00
Werner Backes
56108b5381 Introduced GPSVelocity UAVObject 2012-04-09 22:59:38 +02:00
Brian Webb
3914d22b09 Turned off watchdog timer, which was crashing on real PipX. 2012-04-07 19:56:12 -07:00
Brian Webb
e639d173a0 Create ID from a hashed CPU serial number. 2012-04-07 19:41:23 -07:00
Brian Webb
7b49a6b820 Added watchdog to radio com bridge in PipXtreme. 2012-04-07 19:12:49 -07:00
Brian Webb
f4d886de75 Added support for determining when the radio->com link is between UAVTalk packets. This is required to inject UAVTalk messages into the message stream. 2012-04-07 18:17:57 -07:00
Brian Webb
0f9f897870 Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream. 2012-04-07 18:17:32 -07:00
James Cotton
414e62f14e Revert "Disable baro updates into INSGPS for now. Seems to cause issues." 
This reverts commit 04591309770679e7b01c53a6cb54cac1c043f8b6.
 2012-04-07 00:58:36 -05:00
James Cotton
fcb9193d25 Disable baro updates into INSGPS for now. Seems to cause issues. 2012-04-07 00:58:36 -05:00
James Cotton
aa6c8a451d Shrink some stack sizes 2012-04-07 00:58:36 -05:00
James Cotton
81fcfd45c4 Some work on the code to initialize the INSGPS and allow setting the variance 
of the baro
 2012-04-07 00:37:42 -05:00
Brian Webb
56a2006fd8 Reconfigured to run on the real PipX board. 2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9 Fixed ADC configuration 2012-04-06 17:43:43 -07:00
Brian Webb
253de47967 Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2 2012-04-06 17:37:31 -07:00
Brian Webb
bc1adb2519 Some cleanup of rfm22 driver. 2012-04-06 17:36:35 -07:00
James Cotton
345b6578b1 Fix a possible race condition for complimentary filter on L3GD20 attitude 
estimation where the accel queue wouldn't immediately have data available.
Added 1 ms timeout on queue.
 2012-04-06 13:59:12 -05:00
James Cotton
e60c70251f Slow down update rate for the altitude hold smoothed EKF 2012-04-06 13:58:46 -05:00
James Cotton
6c004678d5 Need a really big telemetry queue size on revo for object manager not to choke. 
Probably should slow down how quickly AltHoldSmoothed is set.
 2012-04-06 13:22:30 -05:00
James Cotton
ea13536da0 Take quidance settings from simulation and make the INSGPS pick up the GPS 
noise from a setting.
 2012-04-06 12:59:49 -05:00
Brian Webb
fff93910e2 RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module. 2012-04-05 20:24:50 -07:00
James Cotton
3071f77d59 Add Baro offset to the simulation 2012-04-03 10:58:48 -05:00
James Cotton
c988685293 Simulate GPS noise drift 2012-04-03 09:17:55 -05:00
James Cotton
f491c924d6 Start updating the OSX UDP simulation to use a separate thread for receiving 
but it needs two - one as a task (where the com callback occurs) and another
for the physical process stuff that doesn't need to suspend (like teh TCP
thread does)
 2012-04-03 09:17:55 -05:00
James Cotton
5d0e513678 Fix small deg/rad issue in generating gps data 2012-04-03 09:17:55 -05:00
James Cotton
df6bc4deff Enable guidance on simulation and add wind model 2012-04-03 09:16:31 -05:00
James Cotton
fdfaac6559 More tweaks to OSX simulator 2012-04-03 09:16:31 -05:00
James Cotton
ca535c2632 Fix bugs in simulated sensor data. Now works well with INSGPS. 2012-04-03 09:16:31 -05:00
James Cotton
84040d25b4 Add attitudesimulated object to capture the simulated state 2012-04-03 09:16:30 -05:00
James Cotton
09ce6e1ab4 Restore the original Revolution FreeRTOSConfig and make the osx simulation 
scheduler not start high priority tasks when they are created because I can't
reliably get the starting task to stop (because currently in a swapping mutex I
think).
 2012-04-03 09:16:30 -05:00
James Cotton
6df9691609 Bring back the original module files and remove comments from FreeRTOS 
debugging
 2012-04-03 09:16:30 -05:00
James Cotton
82a2987b2c More improvements to the osx simulation FreeRTOS port. Only tick the tick 
handler when we have confirmed the running thread has halted.  This is more
like what would happen on a single core machine.
 2012-04-03 09:16:30 -05:00
James Cotton
543500ed78 Improve the simulated sensors to produce (I think) consistent data now 2012-04-03 09:16:30 -05:00
James Cotton
0b342ea3d6 Changing the tick counter to only happen after current thread is suspended 
seems to fix stability issues
 2012-04-03 09:16:30 -05:00
James Cotton
fbd8695d7d Check in WIP for osx simulation 2012-04-03 09:16:30 -05:00
James Cotton
c1726e30e5 Make pios_tcp uses two threads - one for the socket stuff and another within 
FreeRTOS to receive the data.
 2012-04-03 09:16:30 -05:00
James Cotton
75262b400a More osx simulation work 2012-04-03 09:16:29 -05:00
James Cotton
da294384b6 Getting closer on osx simulation 2012-04-03 09:16:29 -05:00
James Cotton
a2bc7b8668 Osx Simulator Not running quickly but at least it's staying up 2012-04-03 09:16:29 -05:00
James Cotton
898a595d81 Delete old files 2012-04-03 09:16:29 -05:00
James Cotton
adad006530 More work on OSX simulation 2012-04-03 09:16:29 -05:00
James Cotton
99e246f151 More of the 7.0 files for OSX simulation 2012-04-03 09:16:29 -05:00
James Cotton
356802b5ac Update to FreeRTOS 7 for OSX sim 2012-04-03 09:16:28 -05:00
James Cotton
0d3a6d94d8 Delete some old files 2012-04-03 09:16:28 -05:00
James Cotton
491df5d130 Small update to the osx wdg 2012-04-03 09:16:28 -05:00
James Cotton
51f0c3453b More work on osx simulation engine 2012-04-03 09:16:28 -05:00
James Cotton
3c0b65fbf8 Implement a simulated watchdog to catch when the chip would have reboot 2012-04-03 09:16:28 -05:00
James Cotton
28cab678ce Simulate a more complete QC model. 2012-04-03 09:16:28 -05:00
James Cotton
9d5dbe4bfe Create stub for TCP connection of simulation 2012-04-03 09:16:28 -05:00
James Cotton
6aa1f1e344 Had some debugging outputs (logged to file) still enabled 2012-04-03 09:16:28 -05:00
James Cotton
f1aa3b658e Add a new sensor simulation mode that essentially has a gyro rate that is rate 
desired and the accel based on the current attitude.
 2012-04-03 09:16:28 -05:00
James Cotton
ce54c4205d Disable a print from the port that was causing rashes 2012-04-03 09:16:27 -05:00
James Cotton
6df2df6eec Get rid of the mutex when enabling/disabling soft IRQs. This isn't ideal but 
it seems to be triggering deadlocks.
 2012-04-03 09:16:27 -05:00
James Cotton
6adc74f6f9 Check in the fake sensor data module 2012-04-03 09:16:27 -05:00
James Cotton
dee17f8fd4 Enable task run time monitoring in osx simulation 2012-04-03 09:16:27 -05:00
James Cotton
0e815540ff Patch from Stac that processes module names without using sed. Also enable 
diagnostic stuff for simulation.
 2012-04-03 09:16:27 -05:00
James Cotton
2391385788 Remove the pauase in the idle task. Increases load but also stability. 2012-04-03 09:16:27 -05:00
James Cotton
e97c1bc016 Include the module include file before any uavo ones 2012-04-03 09:16:27 -05:00
James Cotton
dfa39b59bf Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
cb7b475d03 Remove the need ot have two ways of listing the modules for simulation 2012-04-03 09:16:26 -05:00
James Cotton
76bdd09795 Rename the pios_config file for simulation 2012-04-03 09:16:26 -05:00
James Cotton
e79a6e292b Add watchdog flag for simulated sensor task 2012-04-03 09:16:26 -05:00
James Cotton
e0fbdaf9fe Move the pios_board_posix file to something more general 2012-04-03 09:16:26 -05:00
James Cotton
c8a64ccbc7 Need to use slightly different code to generate the InitMods.c function for 
simulation because of the Attitude/Revolution format.
 2012-04-03 09:16:26 -05:00
James Cotton
1763d0c72c Switch to conditional signaling. Seems more robust. 2012-04-03 09:16:26 -05:00
James Cotton
f0e84088c1 Simulated LED now flashing. 2012-04-03 09:16:26 -05:00