rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
5,032 Commits 5 Branches 8 Tags 266 MiB
d125abf335
Commit Graph

376 Commits

Author SHA1 Message Date
Corvus Corax
d125abf335 Baro calibration 2012-04-18 10:48:31 +02:00
Corvus Corax
c5a6ed7486 add missing headers and makefile entries 2012-04-17 16:25:39 +02:00
Stacey Sheldon
6a37e433b6 etasv3: Add driver for Eagle Tree Airspeed Sensor v3 2012-04-17 09:39:00 -04:00
James Cotton
d7cb232315 Add MPU6000 accel range to config structure. Also put in correct values. 2012-04-03 02:07:04 -05:00
James Cotton
a960f3d07e Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code 
to take advantage of this.
 2012-04-03 02:07:03 -05:00
Stacey Sheldon
c854c3f4a4 usbhook: add support in API for deactivating USB 2012-03-07 19:53:17 -05:00
Stacey Sheldon
fdf54ab86c hid: fix response to HID descriptor 
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor.  This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
 2012-03-07 19:52:54 -05:00
James Cotton
f20e5da9ed Merge branch 'next' into revolution 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configrevowidget.h
	ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
 2012-03-03 11:41:41 -06:00
James Cotton
e3df261213 Merge branch 'stac/revo-usb' into revolution 
Conflicts:
	flight/Revolution/System/pios_board.c
 2012-03-02 13:00:13 -06:00
James Cotton
d018d93e88 Clean up previous commit a bit and make the sampling rate a variable (and adapt 
the sampling time accordingly).
 2012-02-13 01:49:54 -06:00
Stacey Sheldon
e2939dae2a revo usb: Add support for USB to Revo 2012-02-07 02:25:31 -05:00
Brian Webb
a314604f9b Added failsafe to GCS Receiver device. 2012-02-02 19:59:42 -07:00
James Cotton
ad3d470f40 Flashfs and Flash: Add new function to write a series of blocks in one flash 
write transaction to improve efficieny.
 2012-01-26 12:39:35 -06:00
James Cotton
4fc907ad0d Add a transaction semaphore to flash and flashfs to make sure multiple saves 
or loads can't be attempted between threads
 2012-01-26 11:36:07 -06:00
James Cotton
205aabe895 L3GD20: Make this sensor push data onto a FreeRTOS queue so that the sensor 
reading task can block according.  Also now the gyro data is sent to
stabilization multiple times per update of the attitude loop.
 2012-01-25 01:20:07 -06:00
James Cotton
0da20bb846 Flash: Because most of the commands are a JEDEC standard rename this file 
pios_flash_jedec and abstract out the methods that can vary between chips.
 2012-01-25 00:23:24 -06:00
James Cotton
a02cad6f52 Flashfs: Separate out the sector sizes and magic values into a runtime 
configurable structure.  This makes it easier to deal with different chip
layouts.
 2012-01-24 23:56:59 -06:00
James Cotton
5ad37e691c USB: Update the USB configuration structure to include the GPIO that is used 
for sensing and then load different config for CC and CC3D.  Updated the
bootloader as well.  Also changed the PIOS_USB_CheckAvailability function to
only return the sense signal and not the transfer_possible flag as this is not
set in time for the bootloader on CC3D for some reason.
 2012-01-24 22:15:43 -06:00
James Cotton
104c091590 Correct the range constants for the L3GD20 driver 2012-01-24 19:48:14 -06:00
James Cotton
a25d52785b Change the bus speed for the L3GD20 to 10MHz and some small cleanups 2012-01-24 19:17:49 -06:00
James Cotton
c9263cb8c0 L3GD20: Dynamically allocate buffer structure when used 2012-01-24 15:51:38 -06:00
James Cotton
8c208412c9 Give the BMA180 a dynamically allocated device structure and also make it 
properly bind to a SPI and slave number.  Temporarily reducing spi bus to
slowest possible speed.
 2012-01-24 14:38:00 -06:00
James Cotton
c242ab8b86 Merge branch 'next' into revolution3 
Conflicts:
	flight/AHRS/ahrs.c
	flight/AHRS/pios_board.c
	flight/Bootloaders/Revolution/Makefile
	flight/CopterControl/System/pios_board.c
	flight/INS/pios_board.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/System/openpilot.c
	flight/OpenPilot/System/pios_board.c
	flight/PiOS/Boards/STM32103CB_CC_Rev1.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/Makefile
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/test.c
 2012-01-24 10:46:35 -06:00
James Cotton
66293a9788 Merge remote-tracking branch 'origin/stac/led-boottime-config' into next 2012-01-24 10:38:33 -06:00
James Cotton
4d3af7afbf Add ID test to ADXL345 2012-01-24 09:23:12 -06:00
James Cotton
11471ff68b Update drivers for CC to the new EXTI system and SPI calls 2012-01-24 09:23:12 -06:00
James Cotton
aaf1c5dfdd Update the F1 SPI library to support multiple NSS lines 2012-01-23 23:27:02 -06:00
James Cotton
2524662475 Copy the BMP085 back from next 2012-01-23 16:58:07 -06:00
James Cotton
9a12299074 Update the driver cfg structures for the EXTI changes. Make the drivers call 
the pios_exti_init instead of their individual implementations.
 2012-01-23 16:55:52 -06:00
James Cotton
c84240e485 Merge branch 'next' into revolution3 
Conflicts:
	flight/PiOS/STM32F10x/pios_bmp085.c
	flight/PiOS/STM32F10x/pios_exti.c
 2012-01-23 06:51:30 -06:00
Stacey Sheldon
bfe6676eed exti: rewrite exti layer to improve portability 
The exti layer now allows drivers to register interrupt callbacks
during board initialization.  All details of the driver using a
particular EXTI pin have been removed from the EXTI layer so it
can now be used on any board without board-specific modification.

This includes some nice refinements provided by Mike Smith during
initial review.  His original commits have been squashed into this
one.
 2012-01-22 23:23:41 -05:00
Stacey Sheldon
6bb4f0c61d leds: use boot-time config for PiOS LED layer 
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
 2012-01-22 18:22:59 -05:00
James Cotton
e505de7ba0 Remove redundant remap field from merge 2012-01-21 13:22:00 -06:00
James Cotton
838370b3a4 Fix calls to backup registers on F4 2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4 Merge branch 'next' into revolution3 
Conflicts:
	flight/Bootloaders/CopterControl/Makefile
	flight/Bootloaders/PipXtreme/Makefile
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/CopterControl/Makefile
	flight/INS/inc/pios_config.h
	flight/Libraries/taskmonitor.c
	flight/Modules/Altitude/altitude.c
	flight/Modules/Attitude/attitude.c
	flight/OpenPilot/Makefile
	flight/OpenPilot/Makefile.posix
	flight/OpenPilot/System/inc/pios_usb_board_data.h
	flight/OpenPilot/System/inc/taskmonitor.h
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/System/taskmonitor.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_bmp085.c
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/PiOS/pios.h
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/System/inc/taskmonitor.h
	flight/Revolution/System/taskmonitor.c
	ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
	shared/uavobjectdefinition/systemalarms.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-01-21 11:27:03 -06:00
James Cotton
ff0bd87f4e PIOS SPI: Add a second claim bus method for use in ISR. This has no timeout 
and uses an ISR safe queue claiming method.  This avoids deadlocks when ISR
blocks other tasks from freeing the bus.
 2012-01-21 09:07:06 -06:00
James Cotton
1e8811362e On revolution attach the flash chip to the accel bus now. Also extended the 
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
 2012-01-20 07:37:47 -06:00
Stacey Sheldon
64202ce092 Merge remote-tracking branch 'origin/stac/i2c_decoupling' into next 2012-01-17 22:35:36 -05:00
James Cotton
1b5e776dc5 Hardcoded scale for now since it isn't picking up from the cfg structure. 2012-01-17 19:53:20 -06:00
Stacey Sheldon
bffb184b7a usb: add standard boilerplate to new files 2012-01-16 21:32:52 -05:00
Stacey Sheldon
ec6d550225 i2c: allow i2c adapters to remap pin functions 
Allows us to support more complex pin configurations
for i2c.
 2012-01-14 15:38:55 -05:00
Stacey Sheldon
a51bf72bc7 usb: allow runtime selection of USB descriptors via hwsettings 2012-01-14 14:28:15 -05:00
Stacey Sheldon
2d27c54d48 com_msg: Create new message based COM layer for bootloaders 
The main purpose of this new COM implementation is that it is
much simpler, and requires less code space.  This takes a bit
of the pressure off of the CC bootloader which was right at
the limit of available code space in the bootloader partition.

This is not intended to ever be used by the application.

This driver also formalizes the assumptions in the bootloader's
usage of the COM layer.  All messages are assumed to arrive
in atomic chunks from the HID layer.
 2012-01-14 14:23:18 -05:00
James Cotton
ebbe1bd497 Some beginning work on the l3gd20 driver 2012-01-08 09:07:07 +01:00
James Cotton
cc47520baa Checking ID on ST gyro works 2012-01-04 23:23:42 -06:00
James Cotton
0cc18e7dcf Add files for new L3DG20 sensor 2012-01-04 20:33:54 -06:00
James Cotton
0da6109871 Update the F4 copyright headers to 2012 2012-01-04 19:29:29 -06:00
Stacey Sheldon
e22bc0c51b copyright: remove incorrect attribution in boilerplate text 
These files do not contain content from the ID in the header.
This name seems to have been cut/pasted all over throughout
the openpilot source tree and should be removed from any files
that should not rightfully be attributed to this person.
 2012-01-02 23:33:07 -05:00
Stacey Sheldon
8d8715c8c1 copyright: add/correct GPL + copyright boilerplate 
I missed some of the boilerplate text on some of the
new files I've added recently.  Fixed.
 2012-01-02 23:28:53 -05:00
Stacey Sheldon
481a13609e com: remove all references to PIOS_COM_ReceiveBufferUsed() 
The PIOS_COM_ReceiveBufferUsed() function call is no longer
necessary since the same semantics can be achieved using calls
to PIOS_COM_ReceiveBuffer().
 2012-01-02 14:27:06 -05:00