Cliff Geerdes
d4b0d106f8
LP-73 External Mags on I2C initial coding
2015-10-24 12:09:19 -04:00
Steve Evans
1771d347bb
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge
2015-05-13 20:36:06 +01:00
m_thread
1f7a8d7ef1
OP-1837 Fixed a wrongly named config.
2015-04-27 01:05:47 +02:00
m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
Alessio Morale
ab36dcbdee
Merge remote-tracking branch 'origin/rel-15.02.02' into next
2015-04-20 14:54:07 +02:00
Alessio Morale
061ef1e377
Merge remote-tracking branch 'origin/amorale/OP-1828_optional_analog_inputs' into next
2015-04-20 12:08:34 +02:00
Alessio Morale
6641bb0e21
OP-1828 - Add boards support
2015-04-09 00:26:04 +02:00
Alessio Morale
ee19ff893e
OP-1820 - Add mag orientation parameter in hmc configuration
2015-04-03 20:40:52 +02:00
Steve Evans
6bb732fb02
OP-1289 Need Revo to send two telemetry streams for OSD and GCS
2015-03-14 23:58:18 +00:00
Alessio Morale
3d49362345
OP-1658 - Applying sensor framework to revolution
2015-02-03 00:00:06 +01:00
Alessio Morale
9d36ac4b9c
OP-1658 - Apply to Revolution target
2015-02-03 00:00:05 +01:00
Laurent Lalanne
b9bfcd18d2
OP-1686 Slave Oplink may want to receive PPM data in PPM_Only mode
2015-02-02 21:25:38 +01:00
Karl Knutsson
137c183ec2
OP-1522 Remove unused channel set cfg
...
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
a3715598c7
OP-1522 New channel allocation
...
Generate a pseudo random list of channels from hmac_sha1 with the
coordid as key.
Enforce channel spacing based on the frequency deviation derived
from the configured data rate.
2015-02-02 21:25:38 +01:00
Mathieu Rondonneau
6844f8351d
run uncrustify.
2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d
OP-1626: Allow binding to happen within satellite binding window.
...
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8
Uncrustify
2014-11-27 12:05:59 +01:00
Fredrik Larsson
cd94410468
DSM Protocol removed flight firmware
2014-11-22 08:32:00 +11:00
Alessio Morale
a9f35e2afe
Merge branch 'amorale/OP-1535_mpu_overhaul' into next
2014-10-16 00:51:02 +02:00
Alessio Morale
4a8cfe3f86
OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration
2014-10-10 22:33:50 +02:00
Alessio Morale
9350bd65d9
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
...
Allow per board SPI prescaler settings
2014-10-10 22:33:49 +02:00
Stefan Karlsson
aaebc25eff
OP-1528 Fix Telemetry-only over the Flexi-IO port
2014-10-08 00:31:31 +02:00
Stefan Karlsson
004f5a32a9
OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo
2014-10-06 21:28:09 +02:00
Alessio Morale
d0b37bab28
OP-1507 - Handles GPS data a chunk at time instead of a single byte at time.
2014-09-27 00:17:00 +02:00
Alessio Morale
e64ab1f1ff
OP-1370 - Configure bidirectional COM port for GPS
2014-08-22 02:41:36 +02:00
Alessio Morale
d856bbdb50
OP-1403 - Update targets
2014-08-02 20:48:48 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
c6a773363f
Merge branch 'amorale/OP-943_add_malloc_for_ccsram' into next
...
Conflicts:
flight/pios/common/pios_adxl345.c
make/apps-defs.mk
2014-06-22 19:31:03 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Alessio Morale
eb35803b5b
OP-1365 Flight code instrumentation API: Add support for Revolution
2014-06-07 17:44:27 +02:00
Alessio Morale
99f19dd809
OP-1312 Make WS2811 driver configurable.
...
Now output pin may be chosen among all servo outputs and Flexi-io pins 3 and 4 (they are not used for PWM input/output)
2014-04-26 19:48:44 +02:00
Alessio Morale
a0b857337f
OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added
2014-04-26 18:40:59 +02:00
Corvus Corax
bb91039f51
OP-1290 fixes in telemetry (and pios_board initialization)
2014-04-05 12:53:31 +02:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
3e1b0fd114
Merge branch 'next' into corvuscorax/OP-1022_AH_improvements_amorale
2013-12-07 16:33:57 +01:00
Corvus Corax
7a6c0b61e8
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-11-19 18:36:20 +01:00
Corvus Corax
9537cac701
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-07-28 17:10:20 +02:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Werner Backes
7708aab313
Added vertical velocity as a control loop input to improve dynamics during
...
commanded ascend/decent.
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
flight/modules/ManualControl/manualcontrol.c
shared/uavobjectdefinition/altitudeholdsettings.xml
2013-07-16 21:17:32 +00:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Brian Webb
bab69401b9
OP-932 Allows configuring the Revo as coordinator.
2013-06-27 19:55:01 -07:00
Corvus Corax
cd2cc821d6
made event dispatcher a callback
2013-06-27 18:51:35 +02:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
