Brian Webb
bc9dcd415f
Reverted unnecessary changes to configtaskwidget.cpp
2012-05-19 15:05:17 -07:00
Brian Webb
723f68f763
Reverted unnecessary changes to configtaskwidget.cpp
2012-05-19 14:18:29 -07:00
Brian Webb
c25884bcaf
Cleanup on the PipX branch.
2012-05-18 17:42:25 -07:00
Brian Webb
68d66d4181
Fixed firmware description in PipX status.
2012-05-17 20:35:17 -07:00
PT_Dreamer
bb7e85cf2c
GCS - Changes to the map lib. Preparatory steps
...
to allow WPs to be defined relative to home.
GPS fed UAV map item is only visible when diagnostics are enabled.
Should make users not be confused by 2 UAVs on screen.
2012-05-17 17:27:08 +01:00
Brian Webb
44a1663eb9
Fixed transparent comm on PipX.
2012-05-16 19:02:53 -07:00
Corvus Corax
80f53b185c
GCS: BITFIELD: Set lists of options hardcoded in uavobjectfield.cpp (can only be "0" or "1" )
2012-05-15 19:40:58 +02:00
Corvus Corax
aa7788d04c
UAVObjects: Bugfixes to BITFIELD type
2012-05-15 19:01:32 +02:00
Corvus Corax
8fc471463d
UAVOBJECTS: On GCS side, handle Mode Bitfield in UAVOBJECT Metadata as a type BITFIELD. This has no effect on flight side, since the serialized form is identical to an UINT8 that's interpreted as a bitfield which is used there, so that can change later if necessary
2012-05-15 18:23:25 +02:00
Corvus Corax
31fd30b108
UABOBJECTS: Made GCS aware of new BITFIELD type in UAVObjects - so far not used by UAVObjectgenerator, but can be used (hardcoded) in metadata objects
2012-05-15 18:22:36 +02:00
Corvus Corax
badf509d1d
UAVObjects: switched around order of update modes to give each bit semantic meaning - important to allow usage of a bitfield type later
2012-05-15 18:21:27 +02:00
Mike LaBranche
ed54716436
add gui config data bit storage to fixedwing,multirotor,ground vehicles
2012-05-14 10:05:40 -07:00
Brian Webb
a3269aaf2f
Reverted some file permission changes.
2012-05-13 14:24:57 -07:00
Brian Webb
68d12b1b2f
Fixed some bugs with setting PairIDs in GCS.
2012-05-13 14:24:00 -07:00
Brian Webb
ec67742ff6
Added configuration of COM ports on PipX.
2012-05-12 13:16:36 -07:00
James Cotton
5a67b8cc29
Add Revolution to the list of board names the DFU knows about so that the open
...
firmware dialog opens in the correct location (useful for devs). Honestly the
DFU should be rearranged so all the board ID information etc is in one location
instead of spread throughout various functions and remapped to various other
constants.
2012-05-12 13:39:40 -05:00
James Cotton
9a32e637e9
Suppress the "plug other devices in" dialog for revo bootloader, at least until
...
we can have other connected devices.
2012-05-12 13:32:48 -05:00
James Cotton
46fc5fa4fb
Create a PathPlannerSettings object and move the PathMode setting to there.
...
Also add a (temporary) field to allow storing some custom paths to select on
the fly. Later will be replaced with some code to fetch from the flash chip.
2012-05-12 13:12:57 -05:00
James Cotton
af63f94da0
OP-107 Make the waypoint editor have the ability to add new waypoints and edit their
...
positions.
2012-05-12 13:12:56 -05:00
James Cotton
d42bdacc46
OP-107 Add the model connected to the waypoints so that the waypoints show up and
...
update when connected
2012-05-12 13:12:56 -05:00
James Cotton
15067b010f
OP-107 New gadget for modifying a list of waypoints
2012-05-12 13:12:56 -05:00
Mike LaBranche
5e07e742ef
revised to use GUIConfigManager.GetChannelDescriptions
2012-05-11 21:53:02 -07:00
Mike LaBranche
3a3dc4b888
extend GUIConfigData to support all vehicle types; add GUIConfigDataManager class to get/set
2012-05-11 21:48:46 -07:00
Brian Webb
dd02873908
Reverted changed mode.
2012-05-11 17:53:53 -07:00
Brian Webb
1f5dbcf57c
Mostly complete PipX configuration GUI.
2012-05-11 17:51:18 -07:00
Brian Webb
513c014f5a
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-11 17:44:23 -07:00
PT_Dreamer
f716f16b60
Fixes compile issues on Ubuntu with qt 4.8.0
2012-05-10 14:47:30 +01:00
Mike LaBranche
c066fdc5e6
add support for output channel assignment descriptions for helicp
2012-05-09 15:24:15 -07:00
James Cotton
a857530832
Update the MagicWaypoint gadget to use PathDesired instead of PositionDesired
2012-05-09 11:01:20 -05:00
PT_Dreamer
9f1afacdaf
Minor cleaning
2012-05-08 16:22:06 +01:00
James Cotton
37bb2cfb77
Finish getting rid of PositionDesired in favor of PathDesired and add the
...
ability to move the magic waypoint with the transmitter
2012-05-08 02:42:58 -05:00
James Cotton
0f2c41ac5d
Merge branch 'revolution' into navigation
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2012-05-07 21:53:10 -05:00
zedamota
75b3547e89
Merge branch 'ui_fixes' into next
2012-05-07 15:14:55 +01:00
zedamota
f753105c0f
GCS - disable the boot and safeboot buttons during flash
2012-05-07 15:11:51 +01:00
Oleg Semyonov
a3906aa7ea
Merge remote-tracking branch 'origin/hhrhhr/AeroSimRC_plugin' into os/aerosimrc
2012-05-07 16:09:35 +03:00
zedamota
9481be90af
GCS - Changes reload button behavior, now loads data from persistence memory.
2012-05-07 14:02:58 +01:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Laura Sebesta
bcc1885785
Added tooltips to beginners stab. tab.
2012-05-06 17:53:43 -04:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
Kenn Sebesta
40e215ae27
Fixed bug in configvehicletypewidget.cpp that prevented Octo Coax X from being selected.
...
Fixed labelnames in airframes.ui that were causing compile warnings.
2012-05-06 12:22:43 -04:00
Brian Webb
480371a43e
Resolving merge with origin/next
2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
zedamota
3e32b8db70
GCS - Fixes wrong mixer value being displayed.
2012-05-05 12:30:37 +01:00
James Cotton
474c5c96d3
Change field name back to ILimit to correctly reflect how it works in the code
2012-05-04 15:26:58 -05:00
James Cotton
3ef01569b8
Merge remote-tracking branch 'origin/kenz/PT_UI_fixes' into next
...
Conflicts:
flight/OpenPilot/System/openpilot.c
shared/uavobjectdefinition/positionactual.xml
shared/uavobjectdefinition/positiondesired.xml
shared/uavobjectdefinition/velocityactual.xml
shared/uavobjectdefinition/velocitydesired.xml
2012-05-04 13:21:23 -05:00
James Cotton
65829a6513
Update the revo configuration to be consistent with the new meta data format.
2012-05-03 21:09:25 -05:00
Brian Webb
44d95003f3
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-03 17:56:08 -07:00
James Cotton
3155324384
Merge branch 'next' into cc3d
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
shared/uavobjectdefinition/ahrscalibration.xml
shared/uavobjectdefinition/ahrssettings.xml
shared/uavobjectdefinition/attituderaw.xml
2012-05-03 16:31:49 -05:00
jb
0bca2dbba6
GCS some improvements to the ripping function of the map library.
2012-04-30 14:57:06 +01:00
Laura Sebesta
c6526a07a4
Modified svg text field sizes to be a bit more aesthetic.
2012-04-28 11:11:57 -04:00
zedamota
c8655acd2d
Merge remote-tracking branch 'remotes/origin/kenzPT' into PT_ui_fixes
2012-04-27 18:49:17 +01:00
jb
92b9acd6e8
GCS - Added support for map ripping
2012-04-27 15:55:06 +01:00
Kenn Sebesta
38f9c99596
Changed Basic stabilization UI to remove scaling from full stick movement, etc...
...
in order that the Basic and Advanced tabs correspond.
2012-04-27 09:30:30 -04:00
jb
8fc3958f80
Made the scroll event filter a member of the parent class.
2012-04-26 12:29:00 +01:00
Laura Sebesta
4fedbd7df4
Changed the number of significant digits in many fields.
2012-04-25 06:31:21 -04:00
Brian Webb
663b151f4a
A few more bug fixes on metadata mods.
2012-04-22 20:49:37 -07:00
Brian Webb
aab47d6ed4
Final updates to throttled mode and further memeory reduction in the object manager and event dispatcher to reflect smaller data sizes in metadata.
2012-04-22 14:56:26 -07:00
Brian Webb
a1168b6658
Added additional status reporting to PipX config GUI.
2012-04-21 20:47:50 -07:00
Laura Sebesta
d9510a94eb
Fixed firmware file chooser to be a little more intelligent. Especially important for windows users.
...
However, for Mac and Linux, this currently points to a directory relative to the build directory, which is helpful for devs, but not for users.
2012-04-21 22:03:43 -04:00
Brian Webb
eb6f175af4
Fixed metadata settings in object browswer, and removed update mode never from all uavobjects that used it (changed to manual).
2012-04-21 11:59:14 -07:00
Laura Sebesta
79940287dc
Import UAV objects config gadget UI upgrades. Fixed table selectability, and progress bar.
2012-04-20 08:56:51 -04:00
Laura Sebesta
48d018f9bb
Fixed [cm] vs. [m] unit discrepencies in PFD and xml files, as per revo update to [m-kg-s] units.
2012-04-20 06:11:44 -04:00
Laura Sebesta
73cafd742c
Changed Help
in help menu from displaying plugins to sending user to Wiki.
2012-04-19 19:10:42 -04:00
Laura Sebesta
0b7b86cd24
Turned off wheel scrolling! Also changed all wheel focus
to strong focus
.
2012-04-19 13:00:20 -04:00
Laura Sebesta
ac76628c84
Moved "Help" and "Export UAV Data..." to HELP menu.
2012-04-19 11:54:43 -04:00
Laura Sebesta
ddf45b79cd
Fixed smartsave button instatiation race condition
2012-04-19 09:42:35 -04:00
Brian Webb
19166cc830
Added UPDATEMODE_THROTTLED to UAVObjects update modes.
2012-04-18 18:47:13 -07:00
Brian Webb
f4164d97bd
Merge remote-tracking branch 'origin/next' into Brian-Metadata-Mods
2012-04-17 19:34:44 -07:00
Brian Webb
a65b073c58
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-04-17 17:43:17 -07:00
Brian Webb
16da443405
Added PipX config widget (not complete).
2012-04-17 17:40:24 -07:00
Laura Sebesta
dddbd77a89
Changed all to StrongFocus.
...
Added limits to Ki*ILimit
2012-04-17 18:48:47 -04:00
Laura Sebesta
e143f98793
Fixed steps in spin boxes.
2012-04-17 17:35:48 -04:00
Laura Sebesta
46584209fb
Fixed foxus problems in basic tab.
2012-04-17 17:14:03 -04:00
Laura Sebesta
c6c5e18992
Fixed outputchannelform.ui tab order and tab focus.
2012-04-17 16:32:07 -04:00
Corvus Corax
c5a6ed7486
add missing headers and makefile entries
2012-04-17 16:25:39 +02:00
zedamota
45e34cbae0
Force CC attitude config page refresh on board connection.
2012-04-17 15:19:41 +01:00
zedamota
411c38aebf
Fixes the incompatible message when the GIT tag has a leading zero.
2012-04-17 13:54:41 +01:00
James Cotton
af02eb6517
Merge branch 'sim' into testing
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-04-14 14:40:43 -05:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
James Cotton
26b73e3c8b
Add path navigation mode to guidance. Works well in simulation.
2012-04-10 01:48:03 -05:00
James Cotton
dbcb47e249
Merge branch 'D-Lite/ubx-parser' into revolution_ubx
2012-04-09 17:34:34 -05:00
Werner Backes
56108b5381
Introduced GPSVelocity UAVObject
2012-04-09 22:59:38 +02:00
Brian Webb
5542d7c995
Updated configvehicletypewidget.cpp with metadata mods.
2012-04-05 18:50:47 -07:00
Dmitry Zaitsev
34b8564864
add emulated sonar output
...
40 degree beam, hardcoded.
2012-04-04 01:22:34 +04:00
James Cotton
33874402ea
Store the mag node in the viewer widget
2012-04-03 09:17:56 -05:00
James Cotton
f4bd5a1c71
Add a camera tracker mode (on by default) and make the rotation apply in the
...
right coordinate system.
2012-04-03 09:17:56 -05:00
James Cotton
49d37a8382
Get rid of annoying black box around border of screen and use multithreading
...
for rendering.
2012-04-03 09:17:56 -05:00
James Cotton
86ac80e2f2
Add form to the OsgEarthView widget
2012-04-03 09:17:56 -05:00
James Cotton
c8d5a61316
Move the OSG logic into a standalone gadget instead of the widget gadget. This
...
will allow using the UI forms. Fixed the issues with requiring a popout. Also
the osgEarth takes LLA in the order long, lat, alt whereas our code takes lat,
long, alt. This was causing the NED frame to be rotated 90 degrees.
2012-04-03 09:17:56 -05:00
James Cotton
e804de0a7a
Get the attitude in there although there might be some convention problems on
...
the rotation
2012-04-03 09:17:56 -05:00
James Cotton
b2b44bd23b
Render the model in earth
2012-04-03 09:17:56 -05:00
James Cotton
19111dacd2
Get the Osg Earth View plugin stub working
2012-04-03 09:17:55 -05:00
James Cotton
b67a74a400
Import stub for the Osg Earthview Plugin
2012-04-03 09:17:55 -05:00
James Cotton
84040d25b4
Add attitudesimulated object to capture the simulated state
2012-04-03 09:16:30 -05:00
James Cotton
cd5fad2ae9
Update the map to set locations with the home location representation
2012-04-03 03:42:34 -05:00
James Cotton
3eac69e953
Create stub for waypoint navigation
2012-04-03 03:42:32 -05:00
James Cotton
56af74d17c
Fix map to work with the new HomeLocation (no ECEF)
2012-04-03 03:42:30 -05:00
James Cotton
a9aa6b696b
Add object for setting the fusion algorithm
2012-04-03 03:42:24 -05:00
James Cotton
1911c7360d
New NEDPosition object which is the transformed GPS location
2012-04-03 03:42:24 -05:00
Brian Webb
df0a1c2ac1
Upgraded Brian-Metadata-Mods to current next.
2012-04-01 12:25:13 -07:00
Brian Webb
496a323b7f
Fixed indentaion.
2012-03-31 07:59:44 -07:00
Laura Sebesta
6461b91f18
Removed commented code, as per reviewer comments. Made other small reviewer requested changes. Fixed bug with capitalization.
2012-03-29 00:54:11 -04:00
Kenn Sebesta
90e4686d70
Typo correction in airframe UI. Minor GUI upgrades to Input.
2012-03-26 11:49:10 -04:00
Laura Sebesta
ad499c8946
Removed extraneous configccpmwidget.h and configccpmwidget.cpp.
2012-03-25 18:42:32 -04:00
Laura Sebesta
88a46f9062
Merge GroundVehicle into latest next
2012-03-25 12:21:58 -04:00
Sambas
4c6ee740e2
Merge remote-tracking branch 'remotes/origin/james/revolution' into osd_test_v1
2012-03-25 14:28:25 +03:00
James Cotton
f3de06bd0f
For some reason leaving this tab on the second tab by default (while not
...
correct) causes crashes which is bad.
2012-03-23 00:56:46 -05:00
James Cotton
56233e262b
Remove unnecessary decimals for roll/pitch/yaw rates.
2012-03-22 11:35:29 -05:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
James Cotton
6cb3abec80
Allow firmware compiled for 0x902 to be downloaded to 0x901
2012-03-22 00:42:23 -05:00
James Cotton
1eaf6f66fb
Rename one of the boxes in the runnindevicewidget.ui to avoid warnings.
2012-03-22 00:42:22 -05:00
James Cotton
6350ec575e
Merge remote-tracking branch 'origin/os/features/stick-deadband-next' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-03-21 16:03:40 -05:00
zedamota
4e6114d095
Merge remote-tracking branch 'remotes/origin/laurent/modelview' into next
2012-03-20 23:20:20 +00:00
Laurent Ribon
299f9fd5d3
Comment the line "VERSION = 2.2.0"
2012-03-20 00:10:31 +01:00
Laurent Ribon
b36be73ffb
Add the possibility to set VBO usage when running.(No restart required)
...
Change Zoomm sensibility (made it more sensitive)
Remobe unecessary state variable :
- load Error
- init failed (An OpenGL init failed cause a Crash)
2012-03-19 20:41:28 +01:00
Laurent Ribon
081769fb7b
Make method setVboEnable not inline.
...
There is more stuf to do.
2012-03-19 20:38:21 +01:00
Brian Webb
aba3789d87
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into Brian-Metadata-Mods
2012-03-18 13:28:11 -07:00
Laurent Ribon
75d1f74090
Modify the modelview gadget widget in order to make it work with the
...
latest vesrion of GLC_lib and Qt4.8
2012-03-14 20:03:39 +01:00
Laurent Ribon
a636abef43
Activate Modelview plugin with QT4.8
2012-03-14 19:57:50 +01:00
Laurent Ribon
5eeafa227c
Replace GLC_lib OpenPilot version to the latest GLC_lib version.
2012-03-14 19:57:11 +01:00
banigreyling
761924e855
Made the config look-and-feel more consistent according to the stabilization panel
2012-03-11 18:56:43 +02:00
banigreyling
02b0da9b33
Made the config look-and-feel more consistent according to the stabilization panel
2012-03-11 17:21:12 +02:00
Sambas
742f3ff24d
Merge remote-tracking branch 'remotes/origin/james/revolution' into osd_test
...
Conflicts:
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-11 09:39:51 +02:00
Sambas
ccf5c310c9
Updates
2012-03-11 09:27:38 +02:00
Stacey Sheldon
5060ad311b
gcs: remove reference to obsolete ui_ahrs.h file
2012-03-10 14:52:32 -05:00
banigreyling
909083c124
Input panel changes
2012-03-10 20:50:14 +02:00
Dmitry Zaitsev
933dfa8609
GCSReciver: fix UI and increase number of channels
2012-03-10 06:00:00 +04:00
Dmitry Zaitsev
3a5b0c2329
plugins: add hitlv2 in build tree
2012-03-10 05:56:56 +04:00
Dmitry Zaitsev
c68af6de78
HITL: initial commit
...
plugin for simulator: https://github.com/hhrhhr/Aerosim-plugin-for-CopterControl
2012-03-10 05:56:07 +04:00
Sambas
91a9e45888
Updates, first UAVtalk client test
2012-03-05 19:53:52 +02:00
James Cotton
11e7f58b63
Merge remote-tracking branch 'origin/os/features/pid-tuning-from-transmitter-next' into next
2012-03-05 00:18:17 -06:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
James Cotton
3c92e1cbcf
Set the grahpicssystem to "raster" in the code after the reported performance
...
benefits. This can be overriden on the commandline with -graphicssystem
2012-03-02 18:14:23 -06:00
zedamota
6d004f06f5
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next
2012-03-02 18:48:11 +00:00
zedamota
05ef028f9d
GCS - Make the save/apply operation result icons disappear when the form contents changes.
2012-03-02 18:47:24 +00:00
James Cotton
21699a3fce
Set the grahpicssystem to "raster" in the code after the reported performance
...
benefits. This can be overriden on the commandline with -graphicssystem
2012-02-29 22:22:43 -06:00
zedamota
37975dc00a
GCS-Fixes new stabilization controls decimal places
2012-02-29 18:28:26 +00:00
David Ankers
d38a173bed
Bug: Spinbox for PitchRateKp was linked to the wrong UAVObject
2012-02-26 16:40:08 +11:00
Dmytro Poplavskiy
3d05256a36
Welcome page UI tweaks
...
To make it closer to proposed design.
* Aligned the background OP logo to the bottom-right corner
* Don't upscale the OP logo
* Fixed width of community panel
* Changed the vertical layout of icons and community panel
* Fixed color of community panel titles
* Use styled text for next containing &,
this fixes rendering but "..." are not displayed
2012-02-25 20:17:55 +11:00
Corvus Corax
a16c392bc6
Change to GLC Lib to make it compile on Linux with QT 4.8.0.
2012-02-24 14:28:48 +01:00
Oleg Semyonov
2271b95816
Merge remote branch 'origin/next' into os/features/stick-deadband-next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/config/configtaskwidget.h
2012-02-23 08:32:27 +02:00
Oleg Semyonov
e62cc8914c
Merge remote branch 'origin/next' into os/features/pid-tuning-from-transmitter-next
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configtaskwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2012-02-22 23:03:17 +02:00
Brian Webb
aea5374be9
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into Metadata-Mods
2012-02-20 19:11:23 -07:00
Brian Webb
43f6458f86
Reduced the sizeof the UAVObject metadata by:
...
1) Combining all binary or mode values into a single byte
2) Adding accessor functions to read/write the flag bits
3) Reduced the size of the time values from 32 bits to 16 bits
2012-02-20 18:45:18 -07:00
David Ankers
709c985b17
Update to Dado's work on the Stab UI
2012-02-21 03:53:00 +11:00
David Ankers
4a0d101f12
Start adding Dado's artwork and GUI changes
2012-02-19 18:05:33 +11:00
David Ankers
f6303b80a5
Constructor was called directly, GCC 4.6.1 on X64 Linux was not a fan
...
This fixes the build
2012-02-19 14:44:49 +11:00
David Ankers
d79eea0468
Use new icons for welcome plugin
2012-02-19 14:18:32 +11:00
David Ankers
0a352e179a
Add Steve's new icons
2012-02-19 13:12:27 +11:00
zedamota
6fdec3364a
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next
2012-02-18 20:38:22 +00:00
zedamota
91e3ee13fd
Fix input and output configuration layout issues.
2012-02-18 20:37:30 +00:00
zedamota
949785d212
Fixes shadow widgets values not being refreshed if master widget default value is equal the the UAVObj field value.
2012-02-18 16:58:10 +00:00
Sambas
4dd91d08c2
Settings, home arrow tests & other updates
2012-02-18 12:38:50 +02:00
David Ankers
80715fbec3
Update Plist info for Mac
2012-02-18 08:38:01 +11:00
James Cotton
fbb0b1173a
More work from Kenz to improve the matlab parser
2012-02-16 04:24:10 -06:00
Oleg Semyonov
b02b64ece9
Change to GLC_lib to make it compile on Windows with Qt 4.8.0
2012-02-16 01:17:56 +02:00
Oleg Semyonov
4b06f68f11
Need to link a few new libraries for the QML stuff (windows)
2012-02-16 01:16:09 +02:00
James Cotton
32b156b686
Update dependencies on the Util gadget relating to the Settings gadget. Fixes
...
clean build.
2012-02-14 18:16:00 -06:00
James Cotton
68836b4a48
Disable ModelView with linux-g++-64 since it causes segfaults
2012-02-14 16:25:35 -06:00
David Ankers
688f3d9c84
Merge branch 'welcome' into next
2012-02-15 07:59:20 +11:00
James Cotton
7c65bcc5ac
Merge remote-tracking branch 'origin/pt/gcs_uavobj_widget_framework' into next
2012-02-14 14:24:23 -06:00
James Cotton
03d12915af
Merge remote-tracking branch 'origin/os/features/better-version-info-and-uav-export' into next
2012-02-14 13:39:00 -06:00
James Cotton
af189cc0ab
Merge remote-tracking branch 'origin/remote/origin/banig/ScopeChanges' into next
2012-02-14 13:24:49 -06:00
James Cotton
bb89b82865
Merge branch 'next' into GCS_QML_Dmytro
2012-02-14 12:35:14 -06:00
James Cotton
fea4accb07
Patch from Kenz to suppress warnings about unknown object IDs until end of
...
parsing
2012-02-13 16:36:05 -06:00
James Cotton
81ceb9c17a
Precompute CRC table in a global constant. Also if datasize for unknown object
...
is > 256 ignore it since corrupt data.
2012-02-13 16:27:44 -06:00
James Cotton
c111e26958
Patch from Kenz to suppress warnings about unknown object IDs until end of
...
parsing
2012-02-13 14:55:44 -06:00
Oleg Semyonov
a01e38c277
Merge remote branch 'origin/master' into os/features/pid-tuning-from-transmitter
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configgadget.qrc
2012-02-13 11:51:00 +02:00
zedamota
855cc0f663
Fixes the BT telemetry not working on non windows OSs.
2012-02-12 17:27:26 +00:00
James Cotton
34ca5777dd
Kalman filter for altitude
2012-02-11 21:08:19 -06:00
zedamota
74108e200b
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into pt/gcs_uavobj_widget_framework
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.h
ground/openpilotgcs/src/plugins/config/stabilization.ui
2012-02-11 22:29:03 +00:00
zedamota
aea1e45de7
Added some documentation to the new framework
2012-02-11 21:38:27 +00:00
zedamota
1da2cf5166
Added support for multiple instances objects.
2012-02-11 18:35:36 +00:00
banig
2aead6a7c6
Made method name more descriptive
2012-02-11 16:17:20 +02:00
banig
8e1a7ae709
Add warning to let user know if Scope refresh interval is quicker than the telemetry data
2012-02-11 15:59:34 +02:00
Dmytro Poplavskiy
e6df2ca6d3
Replaced the welcome page with a QML based one.
...
It's still necessary to replace the mode images with the correct ones.
2012-02-11 10:14:13 +10:00
zedamota
c2d9af1e89
Finished framework and stab config showcase
2012-02-10 16:34:07 +00:00
sambas
81f01a0b96
Merge remote-tracking branch 'remotes/origin/next' into qwt_6.0.1_upgrade
...
Conflicts:
ground/openpilotgcs/src/libs/qwt/src/qwt_global.h
ground/openpilotgcs/src/libs/qwt/src/src.pro
2012-02-10 17:27:23 +02:00
James Cotton
6d6c7cac60
Added CRC calculation to the matlab log parsing
2012-02-10 08:07:51 -06:00
zedamota
4cdf223bff
Added support for multiple apply/save buttons.
...
Added a few useful signals.
2012-02-08 20:15:14 +00:00
James Cotton
d5207c19f0
Fix for accidentally including inssetings back into build
2012-02-08 09:46:51 -06:00
James Cotton
49a03a868b
Merge branch 'altitudehold' into revolution_overo
...
Conflicts:
flight/OpenPilot/UAVObjects.inc
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
flight/Revolution/Makefile
flight/Revolution/ins.c
2012-02-07 23:00:29 -06:00
zedamota
5cfd763f2a
Bug fixes and showcase UI setup (partial).
2012-02-07 20:29:32 +00:00
zedamota
e2c6a9d58a
Added Dado's UI.
...
Several scale bug fixes.
Added lots of debug info, will clean later.
2012-02-06 17:33:54 +00:00
James Cotton
dbcb499d7f
Add object to monitor the overo link status. Current just records the bytes/s
...
being sent and the connected status (based on sending more than 500 bytes per
second)
2012-02-06 09:37:31 -06:00
Corvus Corax
b4a8eda8db
Merge branch 'corvuscorax/Smoothed_Scope' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-02-06 16:35:13 +01:00
zedamota
35c5391d53
Corrected file headers
2012-02-05 20:07:19 +00:00
sambas
a263ee7885
unix:!mac should solve all problems
2012-02-05 21:45:47 +02:00
zedamota
6d6111b9ac
Moved framework to its own plugin
2012-02-05 18:16:38 +00:00
zedamota
32ebdb63a3
Preparatory commit before moving framework to a better location.
2012-02-05 14:41:23 +00:00
Dmytro Poplavskiy
861b21a18d
Added a QML viewer plugin.
...
UAV objects used in PFD are available in the QMl context.
2012-02-05 22:33:14 +10:00
Dmytro Poplavskiy
aead288304
Generate properties for UAVDataObject fields.
...
Also changed UAVObject::requestUpdate() and UAVObject::update() to be slots.
This makes possible to use objects directly from QML.
2012-02-05 13:58:17 +10:00
zedamota
427acee559
Added support for objects value limits on the GCS to the GCS and generator.
2012-02-03 20:29:28 +00:00
zedamota
4c1e33b0b3
WIP configtaskwidget enhancements.
2012-02-02 16:22:40 +00:00
sambas
fedc62b6c3
OPReview-159: Linux posix timer thing fix
2012-02-02 16:34:46 +02:00
David Ankers
213a915f67
Remove flightplanner screen
2012-02-01 20:09:43 +11:00
James Cotton
bd77b7e5a2
Fix stupid commit on my part. Thanks for heads up brian.
2012-01-31 19:26:48 -06:00
James Cotton
eaf9a4bded
Merge branch 'master' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/cc_hw_settings.ui
2012-01-31 17:30:05 -06:00
James Cotton
c69717edd8
DOS2UNIX cc_hw_settings.ui to make merge work
2012-01-31 17:29:29 -06:00
James Cotton
72be7bb809
Don't use usleep for the poor windows kiddies.
2012-01-31 16:32:15 -06:00
James Cotton
7990d209a8
Fix package deployment script for OSX to make sure the SVG pixmap shows up
2012-01-31 14:48:24 -06:00
James Cotton
a2979125b7
Remove the hardcoded .svg from the QLabel and load it dynamically. This will
...
be useful for CC3D.
2012-01-31 14:47:56 -06:00
James Cotton
318354a115
Fix resizing issue with input wizard
2012-01-31 13:31:14 -06:00
James Cotton
d07b386beb
Revert "made the input wizard background transparent"
...
This reverts commit c5a2afcc2c
.
2012-01-31 13:09:01 -06:00
James Cotton
3a66f70eae
Input config: Increase the delay after detecting a channel to ask for next one
2012-01-31 11:25:18 -06:00
James Cotton
e3f89eb958
Input config: Increase the delay after detecting a channel to ask for next one
2012-01-31 11:24:19 -06:00
David Ankers
a5ffdb7306
Merge branch 'master' into next
2012-01-31 05:32:49 +11:00
Oleg Semyonov
369629ad34
Add "Reset To Defaults" button to Stabilization configuration tab
...
Also add tootips to Reset/Apply/Save buttons.
2012-01-31 04:44:54 +11:00
Oleg Semyonov
911f8fde03
Add "Reset To Defaults" button to Stabilization configuration tab
...
Also add tootips to Reset/Apply/Save buttons.
2012-01-31 04:27:59 +11:00
zedamota
01c910cd2b
OP-616 Fixes wrong HW version being displayed.
2012-01-29 21:49:11 +00:00
David Ankers
6c030482a5
Fix 64 bit compile
2012-01-30 04:51:11 +11:00
Stacey Sheldon
f5e9a9365c
gcs config: fix case on revo config gadget includes
2012-01-28 21:00:15 -05:00
zedamota
c5a2afcc2c
made the input wizard background transparent
2012-01-29 10:28:24 +11:00
zedamota
3d896ffaf5
Fixes scopegadget loading issues with Qt versions > 4.7.4
2012-01-29 10:25:07 +11:00
naiiawah
fdcea01100
numberOfDevices could be left unitialized if sendData or receiveData
...
fail in findDevices or if no one ever calls findDevices. Added init of
var.
2012-01-28 15:12:27 -07:00
zedamota
f6d747d5f0
Fixes scopegadget failure to load with Qt versions > 4.7.4
2012-01-28 22:07:45 +00:00
zedamota
e1d471dc63
Fixes scopegadget loading issues with Qt versions > 4.7.4
2012-01-28 21:25:38 +00:00
David Ankers
e307ab4d74
Merge branch 'master' of ssh://git.openpilot.org/OpenPilot
2012-01-29 04:31:42 +11:00
David Ankers
0a1645587c
Update deluxe dials
2012-01-29 04:30:43 +11:00
zedamota
81fea31b34
made the input wizard background transparent
2012-01-27 17:54:14 +00:00
zedamota
242bfe6c69
added new Transmitter artwork to the input wizard.
2012-01-25 20:29:40 -06:00
James Cotton
3ab40b713e
Add exception to allow uploading firmware for 0x402 boards to 0x401 boards
2012-01-24 16:58:56 -06:00
zedamota
0609cd56e5
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next
2012-01-24 22:30:18 +00:00
zedamota
2c4ed09707
added new Transmitter artwork to the input wizard.
2012-01-24 22:29:08 +00:00
James Cotton
4b3dcc4cc2
Make the leveling panel not crash for new gyro/accel objects but still needs
...
tweaking for CC3D.
2012-01-24 16:14:41 -06:00
James Cotton
c242ab8b86
Merge branch 'next' into revolution3
...
Conflicts:
flight/AHRS/ahrs.c
flight/AHRS/pios_board.c
flight/Bootloaders/Revolution/Makefile
flight/CopterControl/System/pios_board.c
flight/INS/pios_board.c
flight/OpenPilot/Makefile
flight/OpenPilot/System/openpilot.c
flight/OpenPilot/System/pios_board.c
flight/PiOS/Boards/STM32103CB_CC_Rev1.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/Makefile
flight/Revolution/System/inc/pios_config.h
flight/Revolution/test.c
2012-01-24 10:46:35 -06:00
Oleg Semyonov
f7ac0b2645
Merge remote branch 'origin/master' into next
2012-01-24 17:27:34 +02:00
Oleg Semyonov
da650cee60
gcscontrol: keep joystick image aspect ratio
...
OP-619
2012-01-24 11:31:00 +02:00
James Cotton
c84240e485
Merge branch 'next' into revolution3
...
Conflicts:
flight/PiOS/STM32F10x/pios_bmp085.c
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 06:51:30 -06:00
James Cotton
7b69cebe04
Merge branch 'master' into next
2012-01-23 06:07:31 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
Oleg Semyonov
9006dd558f
gcscontrol: code style formatting and cleanup
2012-01-21 00:55:21 +02:00
Oleg Semyonov
7d15cbd720
gcscontrol: new joystick image with active stick area
2012-01-21 00:55:08 +02:00
Oleg Semyonov
5a2119b896
Add stick deadband option to the config GUI
2012-01-15 21:16:57 +02:00
Oleg Semyonov
5be5fe7aa6
ConfigTaskWidget: floating point scale in addUAVObjectToWidgetRelation()
...
This is required to map object field value range [0-1] to widget field
value range [0-100] (in percents).
2012-01-15 21:13:21 +02:00
Oleg Semyonov
91ba89eece
ConfigTaskWidget: add QDoubleSpinBox to addUAVObjectToWidgetRelation()
2012-01-15 21:13:19 +02:00
Oleg Semyonov
13cee28ead
ConfigInputWidget: fix getting enum options from UAVO field
...
Should not use known field order to get UAVO field. This breaks
a widget after adding any float field to the object since after
sorting this field will have index 0 and shift other fields.
This fix should have some runtime checks to make sure the field
was really found, but it should be fixed through the whole GCS
code in a separate cleanup.
2012-01-15 21:13:18 +02:00
Oleg Semyonov
873ff617ab
Improve UAVObjects export and import file formats
...
Changed file format to be able to save settings and data together.
Old settings files still can be imported. Data export will also contain
settings, so we always have the system settings with the system state.
Sample file:
<!DOCTYPE UAVObjects>
<uavobjects>
<version>
...
</version>
<data>
<object id="0xC409985A" name="AccessoryDesired">
<field values="0" name="AccessoryVal"/>
</object>
...
</data>
<settings>
<object id="0xF2875746" name="ActuatorSettings">
...
</settings>
</uavobjects>
2012-01-15 18:37:57 +02:00
Oleg Semyonov
421cf89544
Fix device info struct fields and variable names, better version info messages
...
- fixed deviceDescriptorStruct field names
(gitTag->gitHash, buildDate->gitDate, description->gitTag);
- fixed variable names
(onBoardDescrition->onBoardDescription, LoadedDescrition->LoadedDescription);
- version info in exported UAV files looks now like this:
<version>
<hardware revision="1" serial="51ff6b064883545366621987" type="4"/>
<firmware tag="master" date="20120104 17:51" hash="14ee6e4f"/>
<gcs tag="os/features/version-info" date="20120115 12:57" hash="236fae56"/>
</version>
2012-01-15 18:37:42 +02:00
Oleg Semyonov
5c20f1e37d
ConfigTaskWidget: add some qDebug() statements for unhandled widget types
2012-01-15 00:34:23 +02:00
Oleg Semyonov
4fcd0f97c5
ConfigTaskWidget: add QDoubleSpinBox to addUAVObjectToWidgetRelation()
2012-01-15 00:34:22 +02:00
Oleg Semyonov
6444d6b3f6
TxPID: add module configuration GUI
2012-01-15 00:34:20 +02:00
Oleg Semyonov
99e73a4ae9
Merge branch 'master' into os/features/pid-tuning-from-transmitter
2012-01-14 23:38:21 +02:00
Michael Rumpler
1b314ee256
* cleaned up notifyplugin
...
cause:
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifyplugin.cpp:104:6:
warning: unused parameter ‘configInfo’ [-Wunused-parameter]
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifyplugin.cpp:353:6:
warning: unused parameter ‘values’ [-Wunused-parameter]
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifypluginoptionspage.cpp:73:10:
warning: unused parameter ‘parent’ [-Wunused-parameter]
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifypluginoptionspage.cpp:451:6:
warning: unused parameter ‘rangeStr’ [-Wunused-parameter]
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifypluginoptionspage.cpp:512:7:
warning: unused parameter ‘oldstate’ [-Wunused-parameter]
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifypluginoptionspage.cpp:527:6:
warning: unused parameter ‘deselected’ [-Wunused-parameter]
implemented solution:
fixed all of them (commented out var name)
* fixed bug in check code
cause:
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifyplugin.cpp:
In member function ‘void SoundNotifyPlugin::checkNotificationRule(NotificationItem*, UAVObject*)’:
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifyplugin.cpp:398:109:
warning: suggest parentheses around comparison in operand of ‘|’ [-Wparentheses]
implemented solution:
this is an obvious bug that is syntactically correct but leads to a
warning with a good compiler so this bug can be found. fixed that to use
logical or instead of bitwise or.
* fixed bug in include file (error in compilation under Linux)
cause:
In file included from
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifypluginoptionspage.cpp:47:0:
/projects/OpenPilot/git/ground/openpilotgcs/src/plugins/notify/notifytablemodel.h:86:39:
error: reference ‘_list’ cannot be declared ‘mutable’ [-fpermissive]
implemented solution:
removed the mutable flag, as this is wrongly used on a reference (and
therefore correctly causing a compile-time error
2012-01-11 22:16:26 +01:00
zedamota
63bb2874d7
OP-608
...
Camera Stabilization settings not being read from CC board into GCS if CC is started first.
Created connection callback only to be called after all plugins are loaded.
2012-01-10 17:03:58 +00:00
zedamota
dbd9fcda28
OpenPilot OP-611
...
disable Flash button during operation
2012-01-09 16:53:59 +00:00
zedamota
00cb66ae79
OpenPilot OP-602
...
Please add a Help button on the Firmware page
2012-01-09 16:35:35 +00:00
zedamota
38392ee638
several fixes to the notify plugin
2012-01-09 16:09:50 +00:00
zedamota
9f2b71a351
Convert filename to lowercase
2012-01-09 14:06:27 +00:00
zedamota
553dab50fb
Merge branch 'notify-plugin-merged' into next
...
Conflicts:
ground/openpilotgcs/share/openpilotgcs/sounds/default/minus.wav
2012-01-09 14:02:04 +00:00
sambas
dd26e7c80f
qwt 6.0.1 upgrade, sadly doesn't fix QT-4.8.0 scopeplugin in windows.
2012-01-08 12:13:51 +02:00
James Cotton
534453e028
Delete unused gadget an references to unused objects
2012-01-04 21:11:31 -06:00
James Cotton
12e879ced9
Merge branch 'master' into next
2012-01-04 11:54:27 -06:00
James Cotton
14ee6e4fb5
When configuring a heli transmitter instruct the user to disable throttle hold.
2012-01-04 11:51:16 -06:00
James Cotton
82d91d9830
Talked PT into a simpler firmware mismatch warning in exchange for more
...
photoshop.
2012-01-04 11:51:12 -06:00
Stacey Sheldon
025ed0f43c
Merge remote-tracking branch 'origin/stac/usb-composite-device-v2' into next
...
Conflicts:
HISTORY.txt
2012-01-03 00:02:45 -05:00
Stacey Sheldon
b9eecadbe2
alarms: add BootFault alarm to system health SVG files
...
Original changes provided by Jose, text was slightly
modified to match alarm name.
2012-01-02 23:35:39 -05:00
Stacey Sheldon
4fd40ca0d2
gcs uploader: add support for "Safe Boot" to the GCS uploader
...
When halted in the bootloader or while rescuing a board, the
user can press the "Safe Boot" button in the uploader gadget
to force the FW to boot with a default hwsettings configuration.
The default conditions of the hwsettings uavo will disable all
optional modules, disable all serial port config, and ensure that
the board can communicate via the USB HID telemetry interface.
Once booted in this mode, a user can easily reconfigure the
hwsettings uavo through the config GUI and save the fixed
settings to the board to be used on the next reboot. No need
to wipe all settings just to recover from a non-functional
HW config.
NOTE: The GCS needs to grow some very clear visual clues to
indicate when the board has booted in safe mode. The
firmware helpfully raises a (new) critical alarm called
BootFault whenever it boots in safe mode.
2012-01-02 14:27:07 -05:00
James Cotton
1b6ff0e470
Merge remote-tracking branch 'origin/os/features/advanced-camera-stabilization' into next
2012-01-02 11:38:27 -06:00
James Cotton
a2b067e4d5
Fix GUI bug for the GCS controller
2012-01-02 09:19:50 -06:00
Oleg Semyonov
77a459af5c
Merge remote branch 'origin/next' into os/TxPID-module
2012-01-02 14:49:54 +02:00
Oleg Semyonov
e9ffa9d03a
CameraStab: move defaults button to the right
2012-01-02 14:27:12 +02:00
Oleg Semyonov
6e09d61d87
CameraStab: fix button tooltips
2012-01-02 14:27:10 +02:00
Oleg Semyonov
f62330fefe
CameraStab: add tooltips to all configuration settings
2012-01-02 14:27:08 +02:00
Oleg Semyonov
595c0978b3
CameraStab: add "Reset To Defaults" button
...
This loads the default settings (except output channels) to the GUI page
but does not apply them automatically. User can apply/save them or
reload current values from the board using UAVObjBrowser.
2012-01-02 14:27:07 +02:00
Oleg Semyonov
b01e332e03
CameraStab: rename UAVO field
2012-01-02 14:27:05 +02:00
Oleg Semyonov
9c35570df6
CameraStab: add advanced camera settings to the config GUI
2012-01-02 14:27:03 +02:00
James Cotton
21714911e8
Convert log files to structure of array instead of array of struct from Kenz
2012-01-01 13:19:07 -06:00
James Cotton
ef05cafaca
Merge branch 'revolution' into altitudehold
...
Conflicts:
flight/Libraries/insgps13state.c
flight/OpenPilot/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-01-01 10:50:35 -06:00
Stacey Sheldon
d43258f2fb
gcs uavtalk: improve readability of debug logging
2012-01-01 09:24:22 -05:00
Stacey Sheldon
5c0921e92c
fault: add optional fault insertion module
...
This module and its associated settings uavo can be used
to test various fault conditions during initialization.
To enable the module, add the TEST_FAULTS=YES to your make
command line:
make fw_coptercontrol TEST_FAULTS=YES
Once this module is part of your firmware load, you can
enable it in the hwsettings uavo and then select the
type of fault to insert by editing the faultsettings uavo.
On the next reset, the configured fault will be inserted
into the init sequence to allow you to test the boot fault
recovery code.
With a fault inserted, you should see 3 failed boot attempts
followed by a successful (recovery) boot. You will see the
BootFault alarm set to Critical, and the RAM version of your
hwsettings will be reset to defaults. Since the defaults have
all optional modules disabled, the fault module will be out of
the way during the recovery boot.
You can then "Load" the flash version of the hwsettings uavo
in the object browser, disable the Fault module and then "Save"
the hwsettings module back to the board. The next reset will
boot normally without the fault inserted.
2011-12-30 23:05:39 -05:00
Stacey Sheldon
1543a6dbd3
hwsettings: allow disabling of USB telemetry entirely
...
The GCS hwsettings config widget now disallows any
configuration that disables both HID and VCP telemetry
over the USB port.
The firmware will allow it if the UAVObj is set manually.
This allows a mechanism to reduce RAM usage by another
500 more bytes if USB telemetry can be sacrificed in
certain configurations.
2011-12-30 23:05:38 -05:00
Stacey Sheldon
e980bb863f
uavobj browser: add object size to tree display
2011-12-30 23:05:38 -05:00
Stacey Sheldon
bd9f3569db
gcs uavtalk: Add full state-level debug logs
...
These logs are disabled by default, and can be
turned on at compile time by defining:
UAVTALK_DEBUG
at the top of uavtalk.cpp.
These logs proved very helpful in diagnosing a
serial comms issue.
2011-12-30 23:05:37 -05:00
Stacey Sheldon
fa9702db97
gcs serial: fix broken baud rate selection
...
The difference between 56000 and 57600 baud is very
important.
When using a USB to serial adapter that is capable
of synthesizing arbitrary baud rates, these errors
resulted in a completely mismatched/unusable serial
link.
2011-12-30 23:05:37 -05:00
Stacey Sheldon
ad793f0b81
hwsettings: add HID and VCP config to hwsettings gui
2011-12-30 23:05:37 -05:00
Stacey Sheldon
87be56eff7
hwsettings: add support for com-bridge to hwsettings config gui
2011-12-30 23:05:36 -05:00
Stacey Sheldon
458d3467ab
gcs: properly label ttyACM devices in gcs pull-down selector
2011-12-30 23:05:33 -05:00
dankers
7892f9699d
Add minus for notify as requested
2011-12-29 22:25:17 +11:00
James Cotton
e34f618d89
Accel fields shouldn't be capitalized in the scope config
2011-12-24 16:15:13 -06:00
James Cotton
902a2baef7
Fix the sign of the bias terms
2011-12-24 16:14:53 -06:00
James Cotton
710f95feeb
Get the 6pt calibration working again for revo
2011-12-24 15:58:12 -06:00
James Cotton
d78d345953
Configuration tab for revo
2011-12-24 14:08:08 -06:00
zedamota
761da06b6f
small fix and some cleaning
2011-12-24 10:37:38 -06:00
zedamota
5e43f85cc4
Make the GCS serial telemetry speed configurable
2011-12-24 10:37:38 -06:00
James Cotton
24af36bba3
Merge remote-tracking branch 'origin/pt/configurable_gcs_serial_speed' into next
2011-12-24 09:50:59 -06:00
Oleg Semyonov
7fbbb0e6af
Merge remote branch 'origin/next' into os/TxPID-module
2011-12-24 15:44:16 +02:00
James Cotton
0024cbaa51
Merge branch 'next' into revolution_sensors
2011-12-18 16:28:30 -06:00
naiiawah
6dcf55c41e
Killed off file that should not have been checked in to Git.
2011-12-18 13:36:49 -07:00
James Cotton
2b5f0bccc6
Merge branch 'next' into revolution_sensors
2011-12-16 15:31:14 -06:00
James Cotton
99201d152a
Patch from Kenn to speed up matlab parsing by preallocating arrays
2011-12-16 15:30:48 -06:00
James Cotton
b56c11d1d9
Merge remote-tracking branch 'origin/stac/logging_fixes' into next
2011-12-16 13:54:49 -06:00
Corvus Corax
716bb8ec56
GCS:Scope: Backward Compatibility: Set Interpolation to minimum (1) when not set in config file
2011-12-15 23:49:01 +01:00
James Cotton
4b6aab0513
Merge remote-tracking branch 'origin/stac/logging_fixes' into revolution_sensors
...
Conflicts:
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2011-12-14 10:38:05 -06:00
James Cotton
9f50391fc5
Merge branch 'next' into revolution_sensors
...
Conflicts:
ground/openpilotgcs/src/plugins/coreplugin/OpenPilotGCS.xml
2011-12-13 20:50:10 -06:00
James Cotton
fc2465675a
Update the config file to no longer point to the old AttitudeRaw object
2011-12-13 20:47:52 -06:00
James Cotton
7776cc529b
Remove the old AHRS configuration gadget
2011-12-13 20:32:43 -06:00
James Cotton
bdc7f762d6
Remove old test class that uses outdated objects (AttitudeRaw)
2011-12-13 20:24:57 -06:00
James Cotton
9143a716cf
Disable HITL until it is update to the new sensor objects
2011-12-13 20:24:09 -06:00
James Cotton
889a84da04
Revert "GCS/ScopePlugin: Allow SoftwareInterpolation of measurement value"
...
This reverts commit 4f485f7d61
.
2011-12-13 11:04:21 -06:00
James Cotton
98ee21ead3
Revert "GCS/Scope: CSV export exports non-interpolated data"
...
This reverts commit 99215458c2
.
2011-12-13 11:04:20 -06:00
James Cotton
bf98fe14c3
Revert "GCS/Scope: Make smooth interpolation (and internal sum) be long term correct despite limited floating point accuracy, but keep constant overhead"
...
This reverts commit 78278683cc
.
2011-12-13 11:04:20 -06:00
James Cotton
40e7bf5c59
Revert "GVS/Scope: Bugfix: Export all known data points into CSV not just one per screen redraw"
...
This reverts commit 2ce3365861
.
2011-12-13 11:04:20 -06:00
dankers
000373b421
Update default linear dials to deluxe
2011-12-14 02:24:25 +11:00
James Cotton
a37a17a4fb
Created a separate Sensor module and Attitude module for revolution
2011-12-12 21:40:39 -06:00
James Cotton
d22e0e66dd
Create separate UAVOs for the sensors.
2011-12-12 13:05:40 -06:00
Corvus Corax
2ce3365861
GVS/Scope: Bugfix: Export all known data points into CSV not just one per screen redraw
2011-12-12 09:48:05 -06:00
Corvus Corax
78278683cc
GCS/Scope: Make smooth interpolation (and internal sum) be long term correct despite limited floating point accuracy, but keep constant overhead
2011-12-12 09:48:05 -06:00
Corvus Corax
99215458c2
GCS/Scope: CSV export exports non-interpolated data
2011-12-12 09:48:05 -06:00
Corvus Corax
4f485f7d61
GCS/ScopePlugin: Allow SoftwareInterpolation of measurement value
2011-12-12 09:48:05 -06:00
James Cotton
33a12d829e
Merge branch 'next' into revolution
...
Conflicts:
flight/PiOS/Common/pios_flashfs_objlist.c
2011-12-11 22:55:54 -06:00
Stacey Sheldon
a19bbb7ea3
csvlog: Do not scale data written to CSV files
...
The autoscaling values used by the scope gadget were
being applied to the raw data being written to the CSV
files. This resulted in the CSV file containing data
that had a variable scale, thus making it useless.
2011-12-10 16:50:51 -05:00
Stacey Sheldon
8c0c39ca53
uavobjgen: Update matlab template to accept a logfile path
...
This makes the generated .m file more generally useful.
2011-12-10 16:50:51 -05:00
James Cotton
bfaed9c7e0
Merge remote-tracking branch 'origin/corvuscorax/Smoothed_Scope' into next
2011-12-10 15:20:25 -06:00
James Cotton
24d6c971e6
These layout sizes work on mac too now.
2011-12-10 12:50:30 -06:00
James Cotton
ffb5bf7a7e
Merge remote-tracking branch 'origin/ccfly/channelformlayout' into next
2011-12-10 11:13:32 -06:00
James Cotton
686d5f2dcf
Merge remote-tracking branch 'origin/naiiawah/OP-595' into next
2011-12-10 11:05:14 -06:00
James Cotton
c9933e78c2
Update to joystick image for gcs controller to be much prettier.
2011-12-10 11:01:34 -06:00
naiiawah
6dc121fda6
Updated fix to preserve assert behavior by adding a check routine that
...
is called before trying to add an item.
2011-12-06 22:20:46 -07:00
zedamota
f18c980c4e
Small bug fix.
...
Added minus.wav witch is a copy of magic.was. "minus" file needed.
2011-12-06 13:13:20 +00:00
zedamota
b45044b8c3
Changed conditions base on strings to enums.
2011-12-06 09:59:28 +00:00
Michael Schulz
8a9b508392
layout fix for last 2 columns of outputchannelform
2011-12-05 21:14:52 +01:00
James Cotton
fd93b08cab
Merge remote-tracking branch 'origin/pt/combobox_output' into next
2011-12-05 00:38:47 -06:00
James Cotton
354867bdb1
Keep indenting using spaces.
2011-12-04 22:33:27 -06:00
James Cotton
783510de57
Add break that Brian caught
2011-12-04 22:31:07 -06:00
zedamota
78e25b1b8c
Fixed conditions
...
Added support for negative values
Added support to "play once per update"
Added "never" rule for value sound
Several other bugfixes
2011-12-03 02:36:47 +00:00
Corvus Corax
b287d4f849
Merge remote branch 'origin/corvuscorax/logging-fix' into next
2011-11-30 19:17:54 +01:00
zedamota
fcbb00f757
config outputs now uses dropdown boxes for the update freq.
2011-11-29 17:01:02 +00:00
zedamota
5bc1a10774
Fixes the "halt" and "rescue" problems
2011-11-28 12:12:26 +00:00
James Cotton
4dfdeb9418
Merge remote-tracking branch 'origin/ccfly/channelformlayout' into revolution
2011-11-27 10:24:29 -06:00
James Cotton
cd65df013e
Merge branch 'next' into revolution
...
Conflicts:
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-11-26 22:52:32 -06:00
Corvus Corax
15c1ca4af1
GVS/Scope: Bugfix: Export all known data points into CSV not just one per screen redraw
2011-11-26 22:51:20 +01:00
Corvus Corax
5af9a2558c
GCS/Scope: Make smooth interpolation (and internal sum) be long term correct despite limited floating point accuracy, but keep constant overhead
2011-11-26 22:06:46 +01:00
Corvus Corax
dfd18d43b5
GCS/Scope: CSV export exports non-interpolated data
2011-11-26 22:06:21 +01:00
Michael Schulz
9b32d2f119
little layout fix for channelforms
2011-11-26 13:59:37 +01:00
zedamota
54bd0af16d
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next
2011-11-26 00:07:43 +00:00
zedamota
27de9fcb08
Some tweaks to detection and connection timings. Should fix some issues with "halt".
2011-11-26 00:06:45 +00:00
zedamota
77058807b4
Added some more debug messages to help catch bugs, no that there are any.
2011-11-26 00:04:36 +00:00
zedamota
9eaf09860c
Delay the running device info fetching by 1 second.
2011-11-25 23:59:42 +00:00
zedamota
2b94a1538b
Make the outputs test function disable when the connection is lost.
2011-11-25 23:50:54 +00:00
naiiawah
3303313908
Fixes for OP-595:
...
Changed the UAV import of saved settings to not pull in invalid enum
values. Will warn on the dialog that an element of the UAVObject was
invalid and turn off the "save" checkbox. Also will send a qDebug output
showing the UAVObject name and the invalid enum value.
2011-11-25 16:12:38 -07:00
James Cotton
d3cc67f5c4
Make the input wizard detect already inverted channels and preserve them.
2011-11-25 12:30:17 -06:00
James Cotton
fae611a01f
Fix bug where clicking back at last screen of input wizard would go back to
...
main screen and then in future buttons hung around for no reason
2011-11-25 11:30:12 -06:00
James Cotton
60664f6a26
Merge remote-tracking branch 'origin/ccfly/outputchannelform' into next
2011-11-25 10:48:41 -06:00
Corvus Corax
6913d14e82
GCS:Logging: Correctly adhere to replay speed, and check logfile for plausibility/corruption
2011-11-25 15:11:58 +01:00
James Cotton
856f8a9b6c
Merge remote-tracking branch 'origin/pt/version-mismach-warning' into next
2011-11-21 07:38:16 -06:00
James Cotton
084b175290
Removed general error message for savign. Places using the save should
...
reliably provide feedback.
2011-11-21 07:25:07 -06:00
zedamota
a1f3035f15
added tooltip to the pfd stating the current refresh rate
2011-11-20 20:47:37 +00:00
zedamota
0875831f6d
made the firmware date display on a more user friendly format
2011-11-20 18:18:51 +00:00
zedamota
1632d354a1
Fix the don't show this again option
2011-11-19 18:47:41 +00:00
Corvus Corax
44c8c9fbe5
GCS/ScopePlugin: Allow SoftwareInterpolation of measurement value
2011-11-18 21:09:30 +01:00
Michael Schulz
93267dd26f
Implemented suggestions from code review
...
* reduced top and bottom margins of outputchannelform
* removed obsolete methods in configoutputwidget.h
* fixed comment block
* switched to static accessor methods for UAVO
2011-11-17 20:51:17 +01:00
Michael Schulz
d307446fdf
Merge remote-tracking branch 'origin/next' into outputchannelform
2011-11-14 21:14:45 +01:00
Michael Schulz
9bd74bb591
minor fixes due to last merge
2011-11-14 21:13:34 +01:00
James Cotton
684715930a
Merge branch 'next' into revolution
...
Conflicts:
flight/OpenPilot/Makefile
flight/Revolution/System/inc/openpilot.h
2011-11-14 10:11:53 -06:00
Oleg Semyonov
b2887a25a7
New 3D model: Ricoo (by muralha)
2011-11-14 16:05:10 +02:00
zedamota
e2c4b2f978
Simple mismatch detection, needs testing to find if message is clear enough for users.
2011-11-13 17:39:05 +00:00
zedamota
ad13cee7a1
Added the basis for GCS and FW version mismatch warning.
2011-11-13 16:05:36 +00:00
Oleg Semyonov
de6e450b5f
Merge branch 'next' into os/TxPID-module
...
Conflicts:
flight/CopterControl/Makefile
flight/CopterControl/System/coptercontrol.c
ground/uavobjgenerator/generators/generator_common.h
shared/uavobjectdefinition/hwsettings.xml
component free heap used
----------------------------
Nothing 2544 -
PWM 2416 128
PPM 2392 152
DSM 2448 96
S.Bus 2432 112
GPS (port only) 2352 192
GPS (port+module) 1296 1248
CameraStab 2080 464
Telemetry 1912 632
TxPID 2272 272
2011-11-13 16:25:58 +02:00
James Cotton
3e4a33169c
Merge remote-tracking branch 'origin/dwillis/gcs_gui_fixes' into next
2011-11-12 21:49:56 -06:00
James Cotton
f0b22519be
Merge remote-tracking branch 'origin/corvuscorax/CC_GPS' into next
2011-11-12 21:30:53 -06:00
Oleg Semyonov
951b7c27c2
gcs: fix typo in the GUI
2011-11-12 23:09:52 +02:00
zedamota
deac94253e
small fix and some cleaning
2011-11-11 23:42:36 +00:00
zedamota
a8dbeb2c91
Make the GCS serial telemetry speed configurable
2011-11-11 23:09:44 +00:00
Michael Schulz
ea5caa24d5
Merge remote-tracking branch 'origin/next' into outputchannelform
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
2011-11-11 22:57:33 +01:00
James Cotton
e108bcafed
Merge remote-tracking branch 'origin/naiiawah/uploader_detection' into next
2011-11-11 10:56:17 -06:00
James Cotton
40b2b654b7
Merge remote-tracking branch 'origin/pt/OP586' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
2011-11-11 10:51:04 -06:00
James Cotton
207e2b9e0e
Merge remote-tracking branch 'origin/pt/OP587' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
2011-11-11 10:06:20 -06:00
zedamota
f5c7dba0b1
Merge remote-tracking branch 'remotes/origin/nick/notify-plugin-fixes' into nick/notify-plugin-merged
2011-11-11 15:33:27 +00:00
Corvus Corax
aa69027cb2
Merge branch 'next' into CC_GPS
2011-11-11 11:44:11 +01:00
Michael Schulz
0ac62c77de
Output widget: Converted to an array of output channels.
2011-11-09 19:59:20 +01:00
James Cotton
6fd2426a90
Patch from Kenn for the matlab processing function to fix issue with multiple
...
isntance objects
2011-11-09 12:49:50 -06:00
James Cotton
813ac65159
OP-592: Also fix so it reads the values for channels 9 and 10 correctly
2011-11-07 15:58:08 -06:00
James Cotton
af6eeca8ee
Allow camera stabilization to control outputs 9 and 10. Also add a friendly
...
message to indicate when the output is already assigned.
2011-11-07 15:53:57 -06:00
David Willis
3f8f2c4da1
Add ifdef to retain default behaviour on OSX
2011-11-06 21:13:10 +00:00
Brian Mahaffy
e1dbf3b75c
Changed the uploader gadget to not ask if you want to plug in another
...
board, but only when using CC.
2011-11-05 23:22:56 -06:00
David Willis
3dd708a564
Set drop down width using list box size hint as necessary
2011-11-05 02:04:34 +00:00
Oleg Semyonov
53bef754c3
Merge remote branch 'origin/next' into os/alternative_spektrum_driver
2011-11-04 21:43:12 +02:00
James Cotton
c6bf1845a3
Fix combination on multiple cores with the debuggadget
2011-11-02 17:00:10 -05:00
Oleg Semyonov
2ec0b7d767
Merge branch 'next' into os/alternative_spektrum_driver
2011-11-02 23:02:34 +02:00
Oleg Semyonov
481bff2578
spektrum: code style fixes accoring to OPReview-122
2011-11-01 18:48:07 +02:00
Oleg Semyonov
0aad612720
spektrum: the same type of DSM receivers is now allowed on both CC ports
2011-11-01 01:16:43 +02:00
Oleg Semyonov
0116e6a007
spektrum: rework DSM2/DSMJ/DSMX driver for explicit DSMX resolution support
...
- both CC serial ports are now disabled by default (no telemetry);
- serial ports now have DSM2, DSMX (10bit) and DSMX (11bit) options;
- ReceiverGroups now have DSM (MainPort) and DSM (FlexiPort) options.
For DSM2 protocol there is an explicit resolution bit in the stream, so
the DSM2 should be selected. For DSMX there is no such bit, and user
should choose the resolution from the list configuring the spektrum port.
ReceiverGroups have single DSM option which is handled by the same driver.
Downside: this implementation saves received frame first, unrolls by the
end of frame. This should be ok, but may be improved by unrolling channels
on the fly in the rx callback.
Another minor difference is that a ChannelGroup is now bound to port:
DSM (MainPort) or DSM (FlexiPort). This was considered as acceptable
solution in order to not have 6 DSM options for each ChannelGroup and
even more in case of new DSM protocol variations.
Known problem: it is not possible to choose same protocols like
DSM2/DSM2 for two ports. It can be enabled by adding an exception to
common rule, though.
The DSMX throttle channel misbehavior (zero value) is not treated
specially yet. It should trigger the failsafe being out of bounds.
More info and data dumps are required to handle this properly.
2011-10-30 19:29:03 +02:00
James Cotton
eb5e053a3e
Input configuration: Make the sticks move during the limit setting. Makes the
...
UI more intuitive.
2011-10-27 08:35:20 -05:00
James Cotton
0f8ae1e076
Merge branch 'next' into ins
...
Conflicts:
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-10-26 13:18:44 -05:00
James Cotton
a8f0c5a622
Output widget: Add lines from Sambas to indicate which speeds alter channels
...
7-10. Currently it doesn't indicate appropriately if those are actually
available...
2011-10-25 11:49:26 -05:00
James Cotton
27bf2b383e
Merge remote-tracking branch 'origin/james/remap_outputs' into next
2011-10-23 18:35:25 -05:00
James Cotton
2050ce3fe1
Merge branch 'fix_input' into next
2011-10-23 15:29:12 -05:00
Oleg Semyonov
6a9208e8c3
Merge branch 'next' into os/TxPID-module
2011-10-22 23:34:58 +03:00
Oleg Semyonov
f71361ca83
Merge branch 'next' into os/GPS-on-CopterControl_next_v2
...
Conflicts:
flight/Modules/System/systemmod.c
2011-10-22 23:00:47 +03:00
Corvus Corax
167010e8a0
UAVTalk: Fixed bug in parser failing to handle length of multi-instanceobjects
...
UAVTalk (on GCS): Fixed a null pointer dereference when receiving in a NACK
2011-10-21 02:04:29 +02:00
James Cotton
a1cd6d580c
During output testing disable the reverse checkbox
2011-10-20 08:39:30 -05:00
James Cotton
b6df727d1a
Disable the input wizard while running simple calibration
2011-10-20 08:31:58 -05:00
James Cotton
5c04268205
Input configuration: Make sure during the 500 ms between detecting a channel
...
and requesting next nothing else can trigger.
2011-10-20 08:26:46 -05:00
James Cotton
fd96616c32
Delete large section of unused code
2011-10-20 07:51:00 -05:00
James Cotton
14fa739748
Add dialog box to indicate when test outputs won't work.
2011-10-20 07:20:23 -05:00
James Cotton
46aa8916c6
Fix segfault when selected motors 9 or 10. Also make labels show up in output
...
panel.
2011-10-20 06:56:56 -05:00
zedamota
cfbfbe1209
Only one output configuration at a time is now able to receive user input while the test outputs is enabled.
2011-10-16 00:57:59 +01:00
James Cotton
0193187d0c
Make the UI support 10 output channels
2011-10-15 16:59:42 -05:00
zedamota
ca20187dcf
Made UAVObject import disable the outputs test - see OP-587
2011-10-15 21:16:34 +01:00
James Cotton
08e077e8cb
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2011-10-13 23:16:56 -05:00
James Cotton
1d5364878a
Update CameraStab icon with Muralha's new one
2011-10-13 23:16:09 -05:00
zedamota
8d5b310f1f
Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into next
2011-10-12 16:44:11 +01:00
zedamota
032fa759ac
Fixes the zero while arming checkbox and and OP-575
2011-10-12 16:43:14 +01:00
Nickolay
20757c2efd
+complete all features; +testing in progress;
2011-10-12 08:36:05 +03:00
James Cotton
ef34f6b674
Merge remote-tracking branch 'origin/ed_mac_halt_bug' into next
2011-10-11 10:23:19 -05:00
Edouard Lafargue
6514ea5262
Finally, a fix for the Mac UAVTalk issues: it was all caused by a wrong RunLoop pointer reference
...
because of multithreading.
2011-10-11 00:10:27 +02:00
James Cotton
7da8cb2079
CC: After attitude calibration always reenable BiasCorrectGyro. Fixes odd bug
...
if people have it crash in the middle.
2011-10-08 14:15:48 -05:00
James Cotton
4b04a5d9ea
Merge remote-tracking branch 'origin/pt/mixer_bug' into next
2011-10-06 21:33:59 -05:00
Edouard Lafargue
de8478718c
Attempt to make USB faster on Mac. Breaks the Firmware upload system!!!
2011-10-05 00:38:56 +02:00
Nickolay
6a5589ef51
+multiple selection with D&D completed; +support of enum and range for value completed;
2011-10-04 01:59:37 +03:00
Edouard Lafargue
c06c08e831
Merge branch 'next' into ed_mac_halt_bug
2011-10-03 23:05:52 +02:00
Nickolay
82ec3199d7
+dynamic field UI;
2011-09-29 20:26:46 +03:00
Oleg Semyonov
a38c569cd0
HwSettings: move Telemetry and add GPS port speed to the HwSettings object
...
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08
Merge branch 'next' into os/GPS-on-CopterControl_next_v2
...
Conflicts:
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/UAVObjects.inc
shared/uavobjectdefinition/hwsettings.xml
2011-09-28 22:02:02 +03:00
zedamota
898d3c980d
Cosmetic changes to the Debug plugin
...
One more fix to the mixer bug
2011-09-27 22:10:39 +01:00
James Cotton
cf6a59468f
Merge branch 'next' into ins
...
Conflicts:
flight/INS/Makefile
flight/Project/OpenOCD/stm32f1x.cfg
flight/Project/OpenOCD/stm32f2x.cfg
make/firmware-defs.mk
2011-09-27 01:02:06 -05:00
James Cotton
a53f2353a5
Merge branch 'ed_mac_halt_bug' into next
2011-09-25 15:19:22 -05:00
zedamota
797bb38081
mixer bug fix.
...
Also added a new debug plugin witch shows the debug messages normally not available on release builds
2011-09-25 19:30:32 +01:00
James Cotton
3e61e21e89
Output config UI: Add labels for what things are
2011-09-25 10:50:06 -05:00
Edouard Lafargue
822cbfbc81
Fix MacOS halt issues by using the USBMonitor to detect device re-insertion:wq:
2011-09-25 15:28:08 +02:00
zedamota
352620e0ed
Mixer bug while import fix (try to)
2011-09-23 13:48:27 +01:00
zedamota
246318af7b
Mixer bug fix try
2011-09-22 12:02:22 +01:00
Nickolay
1af42e1b32
+ notify table reordering some changes
2011-09-19 00:30:57 +03:00
Nickolay
1665ae8299
+reordering add some changes;
2011-09-19 00:26:49 +03:00
Oleg Semyonov
d923117c25
TxPID: optional module to tune PID settings using R/C transmitter
...
This module will periodically update values of stabilization PID settings
depending on configured input control channels. New values of stabilization
settings are not saved to flash, but updated in RAM. It is expected that the
module will be enabled only for tuning. When desired values are found, they
can be read via GCS and saved permanently. Then this module should be
disabled again.
2011-09-17 22:49:51 +03:00
unknown
56e71cd82e
+removed public members in notificationitem; +cosmetic changes; +fixed indentation;
2011-09-16 18:39:20 +03:00
Nickolay
c16e386e63
+reordering of table items - experimenting with D&D
2011-09-16 02:24:35 +03:00
Nickolay
e14e0a763b
- temporary remove assert in finished callback;
2011-09-15 01:35:19 +03:00
Nickolay
3af398d7f9
initial changes
2011-09-15 00:38:18 +03:00
James Cotton
1783817b96
INS: First pass at altitude hold code
2011-09-13 01:44:53 -05:00
James Cotton
535449baa9
Merge branch 'next' into ins
2011-09-12 22:41:19 -05:00
James Cotton
06fc5a1110
Input Configuration: Fix flight mode slider detection (looking at wrong channel
...
number).
2011-09-12 22:28:28 -05:00
James Cotton
400ba3bd47
Merge branch 'next' into ins
2011-09-12 18:57:11 -05:00
James Cotton
6bd52832be
Heli configuration: Now the collective passthrough uses the collective channel
...
only. Please note this requires all heli users to scrub their settings and
start over. Please erase your setting and be careful. Remove all blades.
2011-09-12 11:47:59 -05:00
James Cotton
6457276438
Merge branch 'input_configuration' into next
2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338
Input Configuration: support all 18 S.Bus input channels
2011-09-12 02:06:50 +03:00
James Cotton
5d43a8dd36
Input configuration; Remove some old unused variables
2011-09-11 12:24:48 -05:00
James Cotton
3ff7bf7ed0
Input Configuration: Make sure the input channel form always is properly
...
aligned. I hope the fixed size behaves well across platforms.
2011-09-11 12:11:15 -05:00
James Cotton
ce1c56260d
Input Configuration: Refacfor the code a lot to clear up handling the state and
...
transitions to make back and cancel a bit more reliable.
2011-09-11 12:11:02 -05:00
James Cotton
01cd2ded57
Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
...
setting that is mutually exclusive.
2011-09-10 14:20:51 -05:00
James Cotton
c2a8cc3faa
Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
...
setting that is mutually exclusive.
2011-09-10 14:19:12 -05:00
James Cotton
3239fdf21b
Merge branch 'next' into ins
...
Conflicts:
flight/CopterControl/Makefile
flight/OpenPilot/System/pios_board.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-09-09 08:33:34 -05:00
James Cotton
a5509965b2
Input configuration: add reverse checkbox and label for current neutral value
2011-09-09 00:54:47 -05:00
James Cotton
1a2750051a
Input wizard: Make collective pitch come first for helicopter mode transmitters
...
and tell person to use throttle hold so it's detected correctly.
2011-09-08 10:24:52 -05:00
James Cotton
bbdb176409
Input configuration: Make input channel into a dropdown box and make the
...
neutral position into a slider. During calibration the slider moves and the
min and max values are updated appropriately. Also make the collective channel
skippable in the configuration wizard.
2011-09-07 02:13:27 -05:00
James Cotton
cabfbc229d
Input config: Bring back old style calibration. I can't seem to make the input
...
widget list a class variable which isn't very safe (multipe instances of the
config gadget will act funny).
2011-09-06 22:19:12 -05:00
James Cotton
d496f81c68
GCS Input config: Change the layout a bit to make the spacing between rows
...
regular, and move some of the layout to the .ui file.
2011-09-06 17:50:55 -05:00
James Cotton
acfb28b04b
Heli configuration: Make swashplate leveling routine using static accessor
...
methods. Also got rid of incredibly annoying message when you tried to alt-tab
out of GCS.
2011-09-04 23:08:35 -05:00
James Cotton
a81f14a575
CCPM config: Fix the collective pass through mode for multi receiver support.
...
Now the user must configure Accessory# in the input configuration section
though.
2011-09-04 23:08:34 -05:00
James Cotton
6344bc8f83
Fix encoding no configccpmwidget.cpp
2011-09-04 23:08:34 -05:00
James Cotton
d28f0c4c78
GCS Config Stabilization: Increase maximum rate that can be entered to 500
...
deg/s from 300 deg/s for heli people.
2011-09-03 21:25:27 -05:00
James Cotton
e18288085c
OP-390 Make the object saving throw an error message on save failures.
2011-09-03 21:25:20 -05:00
James Cotton
1de58ebb87
Make scope gadget check if object exists before using it. Avoids segfaults
...
when scoped objects disappear.
2011-09-03 21:24:13 -05:00
James Cotton
5a9da23615
Make the object saving throw an error message on save failures.
2011-09-02 13:26:28 -05:00
James Cotton
1d04715476
INS: Rework how the sensor calibration behaves and clean up the interface a
...
bit.
2011-09-02 13:24:35 -05:00
James Cotton
3b20df22d1
Updates to config gadget for new INS objects
...
Make scope gadget check if object exists before using it. Avoids segfaults
when scoped objects disappear.
2011-09-01 12:21:37 -05:00
James Cotton
612d3336b4
This patch breaks backward compatibility with AHRS solidly.
...
Move the configuration files for INS from AHRS* to INS*. Strip out unused
fields in settings and merge calibration and settings since settings has
basically no information.
2011-09-01 12:21:33 -05:00
Stacey Sheldon
a72c657e21
rcvr activity: Speed up activity acquisition
...
Activity detection logic can now move through
the active receivers more quickly.
2011-08-27 20:17:56 -04:00
James Cotton
dc340596f5
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
flight/CopterControl/Makefile
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/UAVObjects.inc
flight/PiOS/STM32F10x/pios_spektrum.c
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadget.qrc
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
Corvus Corax
4bd72923e5
Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS
...
Conflicts:
flight/Modules/GPS/GPS.c
flight/Modules/GPS/GTOP_BIN.c
flight/Modules/GPS/NMEA.c
shared/uavobjectdefinition/hwsettings.xml
2011-08-25 15:33:23 +02:00
James Cotton
fb689221fa
Merge remote-tracking branch 'origin/GCS_UIFixes_Dmytro' into next
2011-08-23 22:36:40 -05:00
zedamota
0d92e00125
Several bugfixes.
...
Created "simple wizard" button witch bypasses the sticks identification screen.
Small bugfix to fix GCS crashing if trying to upload a firmware bigger then the HW capacity.
2011-08-23 11:25:28 +01:00
Dmytro Poplavskiy
ed51756191
Compilation fix on mac
...
It's safer to define GL_CLAMP_TO_EDGE if not available than
to include GL/glext.h.
2011-08-22 09:10:25 +10:00
Dmytro Poplavskiy
6e506161e0
Compilation fix
...
It's necessary to include GL/glext.h on windows for
GL_CLAMP_TO_EDGE define.
2011-08-22 07:34:59 +10:00
Dmytro Poplavskiy
69d5e7fe7e
Added missing Q_DECL_EXPORT to CachedSvgItem
2011-08-21 23:40:11 +10:00
Dmytro Poplavskiy
6b0da6bc72
Changed PFDGadgetWidget to use CachedSvgItem
2011-08-21 21:38:58 +10:00
Dmytro Poplavskiy
bbc137eabe
Added initial CachedSvgItem implementation
...
Texture is regenerated each time item is scaled
but it's reused during rotation, unlike the default
DeviceCoordinateCache mode.
2011-08-21 21:36:41 +10:00
Dmytro Poplavskiy
b6b0703c28
GCS: Fixed stabilization settings layout on a small screen.
...
Put most of widgets into QScrollArea.
It looks the same on large enough screen but scrollbars
are added on netbook size screen.
2011-08-21 19:57:21 +10:00
zedamota
7bf9f4e817
Untested changes, should fix:
...
Spelling mistakes
Show inverted movement as soon as checkbox is checked.
Bring back flightmode change messagebox.
Layout issues (this was not a issue on win so not sure its fixed).
Support for flightmode binary switches neutral=min+(max-min)/2.
Flightmode slider not changing according to command.
Mode 1 roll on the right (still think it doesn't make sense :) )
2011-08-20 19:10:28 +01:00
James Cotton
368323fd59
Merge remote-tracking branch 'origin/james/erase_settings' into next
2011-08-20 13:07:01 -05:00
Corvus Corax
dfd301571a
HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules)
2011-08-20 01:24:06 +02:00
James Cotton
0448b34a91
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2011-08-19 01:51:08 -05:00
James Cotton
f85ae84ec3
Merge branch 'camera_stabilization' into next
...
Conflicts:
flight/OpenPilot/System/pios_board_posix.c
2011-08-19 01:48:24 -05:00
zedamota
0a0d405fc1
Finished the new input configuration wizard. Fixed some bugs along the way.
...
Sending it for review now.
2011-08-17 12:43:08 +01:00
Oleg Semyonov
2020e336d6
OP-290: allow GCS tabs to shrink (by eliding the text), less limit min window width
2011-08-16 20:58:39 +03:00
zedamota
6a103ed332
Integrated artwork into the input config wizard. Some testing left to do before sending for review.
2011-08-16 16:06:18 +01:00
James Cotton
33e61b4405
OP-557: Make the tools erase menu item attempt to perform a full format on the
...
flash chip first, then fall back to erasing settings via the EraseSettings
object persistence. The later only removes UAVO instances that the firmware is
current aware of, so can create issues when jumping between versions.
2011-08-15 11:37:00 -05:00
zedamota
98f84e472b
Trying to get out of merge hell
2011-08-15 14:12:54 +01:00
James Cotton
86b652bbab
Merge branch 'next' into camera_stabilization
2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4
Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
2011-08-14 15:48:16 +01:00
Oleg Semyonov
2f7f920ef3
gcs: (uploader plugin) few firmware info string and icon changes
...
Also it looks like the date check clause doesn't work, needs to be checked.
2011-08-14 17:25:52 +03:00
Oleg Semyonov
ba58ec7e08
gcs: (uploader plugin) replace red warning icon with less serious yellow triangle
2011-08-14 17:25:50 +03:00
dankers
69f8aac967
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2011-08-13 06:12:08 +10:00
dankers
65cb05e212
hhrhhr's fix for modelview gimbal lock, thank you!!
2011-08-13 06:08:07 +10:00
James Cotton
923e33195b
Merge branch 'next' into camera_stabilization
2011-08-11 12:06:50 -05:00
James Cotton
39fcc5bde3
Revert "Telemetry: Remove a processObjectQueue() command that was triggering
...
warnings". Unfortunately this causes problems getting objects quickly on
linux. A complete fix to the connection speed issue on all platforms may
take some work.
This reverts commit 74d1762e4c
.
2011-08-11 12:05:52 -05:00
James Cotton
e56dbfdb24
CameraStabilization: Bad memory error that Sambas caught
2011-08-11 11:02:12 -05:00
James Cotton
681444184c
CCHWSettings: Add help button in
2011-08-11 10:58:22 -05:00
James Cotton
669634782f
UI: Two aesthetic issues on cc_hw_settings.ui:
...
1) Don't override fonts when possible. It makes the layout inconsistent. We
should come up with a stylesheet/system wide way for things like this.
2) Left align the telemetry speed field instead of making it full screen width
3) Move the "Settings apply after restart" message out of the button row. This
makes the buttons not in the same location between panels.
2011-08-11 10:46:54 -05:00
James Cotton
508fdae125
On connect/disconnect load the .png HwConfig image. Drop the .svg from the qrc
...
file for consistency.
2011-08-11 10:32:53 -05:00
James Cotton
0f1fd8f8c1
Update HISTORY.txt and correct a help URL.
2011-08-11 00:00:04 -05:00
James Cotton
bbe3c1533a
Merge branch 'next' into camera_stabilization
2011-08-10 21:57:45 -05:00
James Cotton
a387532a94
Fixed some little race conditions that messed with the configuration UI. Added
...
message to indicate power cycle is required after enabling this module.
2011-08-10 21:57:17 -05:00
zedamota
e221ecbaf4
Finished coding part of new input calibration wizard. Waiting for some artwork to send it for review.
2011-08-10 15:24:35 +01:00
James Cotton
74d1762e4c
Telemetry: Remove a processObjectQueue() command that was triggering warnings
2011-08-10 06:15:13 -05:00
James Cotton
9748640210
Stabilization: Add the option for zeroing the PIDs when throttle is low to GUI
2011-08-10 04:15:37 -05:00
James Cotton
44cc9245e4
CameraStabilization: UI Seems to be working now.
2011-08-10 03:27:41 -05:00
James Cotton
11a98bb9e0
CameraStabilization: Create blank configuration panel
2011-08-09 22:52:02 -05:00
James Cotton
f23eaa8273
Make the Actuator pull from the CameraDesired fields
2011-08-09 21:47:42 -05:00
James Cotton
c4e272b9ad
Merge branch 'next' into camera_stabilization
2011-08-09 20:16:45 -05:00
James Cotton
c1adbf37aa
Also disable notify plugin on Qt 4.8 until this is fixed. Causing runtime
...
error when opening options.
2011-08-09 16:32:01 -05:00
James Cotton
7ce4412916
GCS: Make the icons in config gadget all .png files. The release mac build was
...
having issues with the SVG and 5/7 were png anyway.
2011-08-09 15:09:06 -05:00
James Cotton
224e75bfe5
Merge remote-tracking branch 'origin/PeterG/OP-290_GCS_workspaces' into next
2011-08-08 21:29:07 -05:00
Peter Gunnarsson
e1190fbbac
Change spacing of connectionmanager.
2011-08-08 13:50:46 +02:00
Peter Gunnarsson
cbc45c772f
Do not use QTabBar::setDocumentMode() on OS X.
2011-08-08 12:46:26 +02:00
Oleg Semyonov
247da8c24b
Merge remote branch 'origin/PeterG/OP-520_GCS_qtLibraryTarget' into next
2011-08-07 05:54:22 +03:00
Oleg Semyonov
d30c939c46
Merge remote branches 'origin/PeterG/OP-455_win7_log_file_dialog' and 'origin/PeterG/OP-549_GCS_reversed_dials' into next
2011-08-06 21:56:16 +03:00
James Cotton
852be35b5c
Merge branch 'next' into camera_stabilization
2011-08-05 18:52:14 -05:00
James Cotton
218438e6f8
CCPM Mixer: Field names should not be translated. This would break heli
...
support in non-english languages :)
2011-08-05 18:51:01 -05:00
James Cotton
faca2e9651
CCPMConfig: Convert requestCCPMUpdate function to using the static accessor
...
method for UAVObjects. This fixes a run time bug on OSX.
2011-08-05 18:29:34 -05:00
Peter Gunnarsson
12ba6addb0
Fix for OP-549 reversed dials by Dmitry Zaitsev
2011-08-05 15:33:45 +02:00
Peter Gunnarsson
11d5d0b6d1
Fix for OP-455
2011-08-05 12:22:08 +02:00
zedamota
5d0095f00d
Started working on the multi receiver support
2011-08-04 16:58:41 +01:00
PeterG
7205917562
Fix for generalsettings.ui
2011-08-04 17:30:18 +02:00
Peter Gunnarsson
76ee2c060c
OP-520 Change $$qtLibraryTarget to $$qtLibraryName
2011-08-04 15:17:08 +02:00
zedamota
2a1b830eaa
Merge remote-tracking branch 'remotes/origin/stac/support-multiple-receivers' into GCS_ChangesToUI-RuntimeCFG
2011-08-04 12:13:44 +01:00
Peter Gunnarsson
32f6cf7346
Change to normal tabwidget for workspace panel, allow placement of tab panel on top or bottom and allow reordering of tabs through drag n drop, allow changes to number of workspaces to take effect immediately, merge uavgadgetmanager with uavgadgetmode.
2011-08-04 11:55:18 +02:00
Peter Gunnarsson
4dd7ff3750
Remove unused ViewManager from MainWindow.
2011-08-03 10:58:42 +02:00
Peter Gunnarsson
f3db62bb4f
Remove unused code in splitterorview.cpp
2011-08-03 10:04:40 +02:00
Peter Gunnarsson
951cae948e
Make config gadget use new widget in icon panel.
2011-08-03 10:03:49 +02:00
Peter Gunnarsson
fc2e1c7fd7
Add new widgets with simpler code than what is used currently (FancyTabWidget).
2011-08-03 10:02:51 +02:00
zedamota
1b34376797
Added "changes not saved" message warning to config gadget
2011-08-02 17:06:17 +01:00
Stacey Sheldon
90b2625deb
rcvractivity: Add tracking of Rx channel activity
2011-08-02 01:27:37 -04:00
Stacey Sheldon
1299e110c4
gcs: update CC hw settings to use hwsettings RcvrPort field
2011-08-02 01:22:04 -04:00
Stacey Sheldon
829b8b83f6
rcvr: Add GCS receiver driver for rcvr via telemetry
...
This allows the GCS to emulate a receiver device via the
telemetry link.
Select "GCS" as your input type in the manualcontrol config
screen and calibrate it as normal.
Note: The expected values for the channels are in microseconds
just like a PWM or PPM input device. The channel values
are validated against minimum/maximum pulse lengths just
like normal receivers.
2011-08-02 01:22:04 -04:00
zedamota
cdf4d112ce
Finished refactoring airframe config widget
2011-08-01 13:28:58 +01:00
James Cotton
c5bf0ac657
Merge branch 'stac/refactor-usart-com' into camera_stabilization
2011-07-31 09:13:37 +09:00
James Cotton
96c2d24253
Merge branch 'next' into camera_stabilization
...
Conflicts:
flight/CopterControl/Makefile
flight/CopterControl/System/coptercontrol.c
flight/Modules/Actuator/actuator.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
flight/Modules/System/systemmod.c
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
Oleg Semyonov
921905bd8c
gcs: some cosmetic ui form changes
...
Receiver message font made the same as for other info messages.
Changed few label alignments.
2011-07-28 23:28:59 +03:00
Oleg Semyonov
ad339d32a6
gcs: some cosmetic ui text changes
2011-07-28 23:26:07 +03:00
James Cotton
9840f12658
Disable ModelView on QT 4.8 until fixed.
2011-07-28 18:59:55 +09:00
James Cotton
f2e04f78b7
Change to GLC Lib to make it compile on OSX with QT 4.8.0. This might be
...
required for all OS's with 4.8.0
2011-07-28 18:08:22 +09:00
zedamota
c7cf52be39
Added embedded and gcs version info to exported uavobjects file.
2011-07-27 19:39:08 +01:00
zedamota
69083ee618
Merge remote-tracking branch 'remotes/origin/GCS_ChangesToUI-RuntimeCFG' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
ground/openpilotgcs/src/plugins/config/input.ui
2011-07-26 21:44:59 +01:00
zedamota
b9f1532598
Refractured the Airframe config widget.
...
Corrected some language mistakes.
2011-07-26 20:35:38 +01:00
zedamota
79404ab80e
Moved input type to hw config tab.
...
Created error message for unsupported configs.
2011-07-25 23:18:41 +01:00
zedamota
4dc5e7ea65
Fixed included file case.
...
Changed "throttle curve 1/2" to "curve 1/2".
2011-07-25 14:18:09 +01:00
zedamota
ba8985721c
Fix for bluetooth modules hanging. Turns out certain HW don't implement the EV_TXEMPTY system event. Hack was to create a timer which triggers a fake event every 10secs. It checks the bytestosend value so it shouldn't have any effect on full compliant HW.
2011-07-25 00:43:48 +01:00
Oleg Semyonov
400e07bbd1
gcs: change fw date format to match the fw info and GCS version strings
...
Use UTC time of last commit instead of local time of PC.
Use the same date/time string "YYYYMMDD HH:MM" as GCS uses in About dialog.
2011-07-22 21:29:59 +03:00
zedamota
05f6904e09
Fix tab order. Switch to using unum for tabs.
2011-07-21 15:35:59 +01:00
Oleg Semyonov
75233577dc
gcs: add new menu option for exporting current UAV data objects
...
This menu option is useful for technical support. It exports all
current UAV data objects to the XML, similar to settings. This data
can't be imported (it is useless), but can be published or passed to
the tech support for troubleshooting.
2011-07-21 16:51:47 +03:00
zedamota
3bf7dbd7e5
Added new hw config tab to the config gadget.
...
Created new helper class for update/save buttons which creates a visual feedback of the op result.
2011-07-19 14:50:42 +01:00
James Cotton
7153607b87
Reenable the receiver type input now that it is required.
2011-07-18 10:40:35 -05:00
James Cotton
efb2f315be
Small bug where a field was still referenced but didn't exist in UI.
2011-07-17 02:19:58 -05:00
James Cotton
7081bb926b
Group calibration items in UI as well
2011-07-16 11:16:47 -05:00
James Cotton
8f53ed2fc4
Group the axis limimts in the stabilization settings.
2011-07-16 11:07:30 -05:00
James Cotton
70943faec2
OP-550 UI Changes to make all fonts consistent in config gadget. Drop in the
...
bucket.
2011-07-16 03:26:36 -05:00
dankers
61e5d14d0d
Add Joe's frame renders to the ModelView configuration.
2011-07-13 23:57:59 +10:00
Oleg Semyonov
2f7065e5b5
Merge remote branch 'origin/bugfix-ground'
2011-07-13 00:08:31 +03:00
zedamota
283422b930
Fix for FW upload failing if placed on a folder with non latin1 chars
2011-07-12 21:36:54 +01:00
James Cotton
53ca934b2b
Merge branch 'heli_stabilization'
...
Conflicts:
flight/CopterControl/System/inc/pios_config.h
flight/Modules/Attitude/attitude.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
2011-07-12 13:28:20 -05:00
zedamota
30967a47d2
Merge remote-tracking branch 'remotes/origin/OP-537_PT_Dreamer' into bugfix-ground
2011-07-06 18:37:41 +01:00
Stacey Sheldon
cba0985f26
hwsettings: UAVObject to select hardware runtime hw config
2011-07-05 22:02:37 -04:00
James Cotton
46ae7eb17b
Merge remote-tracking branch 'origin/bugfix-ground' into heli_stabilization
2011-06-30 19:40:22 -05:00
elafargue
b729b67f33
Attempt at making the new uploader gadget a bit more compact for smaller screens, make warning icon consistent with the rest of the icons.
2011-06-26 12:18:00 +02:00
elafargue
c55602a466
OP-538 Included fixes into ground codebase, thanks.
2011-06-26 12:16:21 +02:00
James Cotton
e6ad21d881
Make gyro bias in deg/s * 100 to calibrate more precisely.
2011-06-24 10:51:07 -05:00
James Cotton
0dc541cbaa
Reformat attitude configuration gadget to use static access methods for
...
AttitudeSettings. This helps compiler catch errors.
2011-06-24 10:38:26 -05:00
James Cotton
ab7ff56d96
Compute initial gyro bias while calibrating to speed up convergence
2011-06-24 10:38:26 -05:00
James Cotton
28501842c3
Expose the rate D term which in simulations seems to help damp oscillations for
...
high RateKp terms. However it might be sensitive to gyro noise (vibrations).
In addition it is mathematically similar to lead shapign so probably only use
one or the other.
2011-06-24 10:38:25 -05:00
Oleg Semyonov
dc651b6604
Merge remote branch 'origin/OP-532_Heli_GUI_Improvements'
...
WARNING: this will wipe out system settings. Don't forget to export
settings first with old GCS and import using new GCS after upgrade.
2011-06-24 10:05:54 +03:00
Andrew Thoms
caf3c08ea2
OP-532 Improved visibility abd contrast of servo numbers on the
...
swashplate image
2011-06-24 01:38:29 -04:00
James Cotton
751bcba266
Merge remote-tracking branch 'origin/OP-515-PT_Dreamer'
2011-06-23 18:07:43 -05:00
zedamota
b67b6221d1
OP-515 took CPU serial from the devices screen
2011-06-23 17:42:54 +01:00
James Cotton
493fcaef2a
OP-193 OP-511: Add settings to scale the camera input output range
2011-06-23 00:47:27 -05:00
zedamota
0d7393a8b3
OP-537 Move space to after the coma.
2011-06-22 10:11:19 +01:00
Andrew Thoms
56050b0536
OP-532 Implemented scalling of swashplate image in GUI
2011-06-22 00:38:53 -04:00
zedamota
61956d1ed2
OP-537 Fixed tooltips info
2011-06-21 19:14:39 +01:00
zedamota
59352a2e9a
OP-537 Fix UI bug
2011-06-21 19:08:55 +01:00
zedamota
0ae31593ba
OP-537 Fixes according to Osnwt suggestions
2011-06-21 18:58:46 +01:00
zedamota
6910bbb4f1
OP-515 Changes according to Osnwt suggestions.
2011-06-21 18:09:37 +01:00
Andrew Thoms
97c22fb57c
OP-532 Better indication of unassigned servos in heli config UI
2011-06-20 22:40:22 -04:00
Andrew Thoms
438cb91709
OP-532 minor GUI improvements to highlight incorrect servo assignments
2011-06-20 22:20:19 -04:00
Andrew Thoms
cf342b4155
OP-532 make all swashplate lines draw even if servos not defined
2011-06-20 21:39:10 -04:00
Andrew Thoms
ca21863f91
OP-507 added more swashplate configurations
2011-06-20 21:33:11 -04:00
Andrew Thoms
177263c237
OP-532 minor UI changes to servo selection box visibilities
2011-06-20 21:04:51 -04:00
Oleg Semyonov
8bcdd62dbd
Merge branch 'bugfix-flight'
2011-06-21 00:49:32 +03:00
James Cotton
5e5f1bb3f1
Merge remote-tracking branch 'origin/OP-530-PT_Dreamer'
2011-06-20 14:09:24 -05:00
James Cotton
0f2e4730b4
Merge remote-tracking branch 'origin/OP-530-PT_Dreamer'
...
Note this requires redoing the mixer settings!
Conflicts:
shared/uavobjectdefinition/mixersettings.xml
2011-06-20 14:08:08 -05:00
zedamota
880905efba
OP-530 Change multirotor max throttle default value to 90%
2011-06-20 14:39:01 +01:00
zedamota
1c700c9e7c
OpenPilot OP-537
...
Make the GCS input configuration errors a bit more informative
2011-06-20 14:28:16 +01:00
zedamota
4d634ad304
Merge remote-tracking branch 'remotes/origin/OP-515-PT_Dreamer' into bugfix-ground
2011-06-20 11:21:45 +01:00
Andrew Thoms
e74c3390f7
OP-532 Minor UI layout changes
2011-06-20 00:31:30 -04:00
Oleg Semyonov
52d22c59d3
Revert "OP-522: fixed throttle calibration if input channel is reversed"
...
This reverts commit 0ba605812e
.
The real problem was not with this, but due to unexpected reverse
checkbox behaviour.
Reverse checkboxes are completely ignored at the start of calibration,
they can be even set checked initially. But change of checkbox does not
reverse the GCS control gadget display. This should probably be fixed.
2011-06-19 19:37:22 +03:00
Mathieu Rondonneau
d5cd3e0d2a
OP-423: fix problem in GCS when the config files get deleted.
...
GCS aborts on a table overflow when trying to set the axes with wrong number of channels.
2011-06-18 19:30:28 -07:00
zedamota
c6350492eb
Cleaning and formating
2011-06-19 00:56:35 +01:00
zedamota
a0eca05595
Many changes to the uploader Gadget
2011-06-19 00:50:38 +01:00
Oleg Semyonov
21f988321e
Merge branch 'master' into bugfix-ground
2011-06-19 02:18:06 +03:00
Oleg Semyonov
0ba605812e
OP-522: fixed throttle calibration if input channel is reversed
2011-06-19 02:15:23 +03:00
dankers
eecacc57f6
Update deluxe dials from London Flyer, added deluxe horizontal dial
...
Note: these are not used by default, commiting to master directly
2011-06-19 02:34:12 +10:00
Andrew Thoms
6578eba0a0
Op-532 prevented settings being retreived from hardware during an update
...
to hardware
2011-06-17 01:01:55 -04:00
Andrew Thoms
90f7062940
OP-532 Implementation of Collective pass-through mapping
2011-06-16 22:52:41 -04:00
Andrew Thoms
08822807b3
OP-532 Now saving channels to GUI config data structure
2011-06-16 00:33:07 -04:00
Andrew Thoms
5c5a07b101
OP-532 Updated GUI config data definition, UI, and implemented three
...
sliders in mixer generation code
2011-06-16 00:09:27 -04:00
Andrew Thoms
22269b658d
OP-532 improved UI layout for new controls
2011-06-15 00:39:13 -04:00
James Cotton
d7e08e5686
Merge branch 'heli_improvements'
2011-06-14 09:13:52 -05:00
Andrew Thoms
748d49817f
OP-532 Save and Load UI elements to new GUIConfigData UABObject Field
2011-06-14 00:53:42 -04:00
Andrew Thoms
1c1881663f
OP-532 Save and recall the new GUI config data to UAVObject
2011-06-14 00:10:28 -04:00
Andrew Thoms
23f9dc42cc
OP-532 Created union of struct to assist in type casting of GUI settings
...
to UAVObject
2011-06-13 21:40:39 -04:00
Andrew Thoms
651c65ad84
OP-532 Started with GUI configuration save to OP hardware
2011-06-13 20:46:53 -04:00
elafargue
b4d65102b1
Add "..." on import and export buttons
2011-06-13 18:59:53 +02:00
elafargue
54d57f1815
Merge branch 'bugfix-ground' of git.openpilot.org:OpenPilot into bugfix-ground
2011-06-13 18:56:30 +02:00
Pip
7b3241cca9
Fixed GCS export file selection problem - in windows.
2011-06-13 16:12:04 +01:00
elafargue
8807d6bf0f
OP-534 Disable arming completely when staring calibration procedure. Tells user to reconfigure arming manually afterwards.
2011-06-13 12:14:40 +02:00
Andrew Thoms
c8939e6e4f
Merge branch 'heli_improvements' into OP-532_Heli_GUI_Improvements
2011-06-12 23:21:00 -04:00
Andrew Thoms
2dab73a128
minor updates to UI code for visibility of controls
2011-06-12 00:31:22 -04:00
Andrew Thoms
6ad60a7971
Implemented UI code for new ccpm options checkboxes and sliders
2011-06-12 00:17:32 -04:00
Andrew Thoms
86f5d63045
Changed names of new ui components
2011-06-11 22:35:19 -04:00
Andrew Thoms
2454596211
Modified names of new controls
2011-06-11 22:21:33 -04:00
Andrew Thoms
f9bddb107d
changed label on single servo to 1st servo
2011-06-11 22:15:56 -04:00
Andrew Thoms
716f87e79b
Added linking between new controls on ui
2011-06-11 22:13:55 -04:00
Andrew Thoms
597838ba0c
Update CCPM config ui file for new options
2011-06-11 22:08:36 -04:00
zedamota
689eb2c588
Minor Cleaning
2011-06-12 00:49:05 +01:00
zedamota
cac495cebb
Fix custom mixer throttle 1 curve.
2011-06-11 19:39:24 +01:00
dankers
9c6f2e0aea
New deluxe linear dials, new files and not used by default so commiting to master.
2011-06-11 23:24:59 +10:00
Oleg Semyonov
5d0c7fe42e
Merge branch 'master' into heli_improvements
2011-06-11 12:19:07 +03:00
Oleg Semyonov
52d9438847
Merge remote branch 'origin/bugfix-ground'
2011-06-10 23:02:45 +03:00
dankers
d9607c44d8
Minor update from London flyer, readability on smaller screens improvement
2011-06-10 23:51:01 +10:00
dankers
314f596940
Update to Ed's PFD from London Flyer, adds slight look and feel improvments and removes the orange look.
...
Uses some look and feel from Guy's work also.
2011-06-10 21:40:30 +10:00
elafargue
c79cc1eb1a
OP-376 Make all dialogs more dynamic to cope with smaller screens & resizes.
2011-06-09 18:03:19 +02:00
Oleg Semyonov
bc3b23a4a2
Merge branch 'bugfix-ground' into heli_improvements
2011-06-09 15:58:11 +03:00
elafargue
9d89f1e180
OP-528 Make the manual and maximum RPY rates available in the config gadget
2011-06-09 13:12:03 +02:00
Oleg Semyonov
f766642f0d
Merge branch 'master' into heli_improvements
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
2011-06-09 10:11:27 +03:00
elafargue
1ac92643b7
Fix 'smart' throttle/flight mode channel assignment, it works now. Someone please test & report.
...
OP-522
2011-06-08 22:15:10 +02:00
James Cotton
3a3c88cefa
OP-522: When you unchecked Run Calibration it forces the Throttle neutral to 5%
...
of the range and the FlightMode to 50%.
Sorry there's also some indentation changes mixed into this patch.
2011-06-08 12:21:43 -05:00
zedamota
dcccae7270
Change throttle default max value to 0.95 on multis
2011-06-08 18:21:29 +01:00
James Cotton
f361603a10
OP-521: Fixed reversal of flight mode in GCS properly now I have hardware to
...
test it :)
2011-06-08 12:01:47 -05:00
James Cotton
68d6e7deba
OP-521: Fixed dangerous UI bug that reversed flight mode switch on GCS relative
...
to flight when flight mode switch input range was reversed. Also switche to
using static field method technique for compiler error checking (preferrable
when possible)
2011-06-07 17:35:21 -05:00
James Cotton
0b78ae07bb
OP-521: Match the flight logic for processing flight mode switch position on
...
GCS so the slider should always match what hte internal logic says.
2011-06-07 17:04:36 -05:00
Oleg Semyonov
268488a5b8
config: relax the CCPM mixer disclaimer (it has been used already)
2011-06-07 19:46:46 +03:00
Oleg Semyonov
b1d945c6f2
OP-369: remove completed TODO list, unify capitalization
2011-06-07 19:41:52 +03:00
elafargue
9b572407a7
Small compilation warning fixed and small typos
2011-06-07 17:15:16 +02:00
elafargue
dbba0afe0d
OP-369 Last improvements to import option.
2011-06-07 17:06:50 +02:00
elafargue
a7dccb6648
OP-502 If a board is not connected, the "Save" button is grayed out. The "Apply" button is still enable, which enables creating configurations purely offline.
2011-06-07 16:56:16 +02:00
elafargue
81b29c2b51
Merge branch 'master' into bugfix-ground
2011-06-07 14:59:43 +02:00
elafargue
8ac5399c1d
OP-527 Implemented as requested: will load the default settings if no settings found, without asking.
2011-06-07 13:54:38 +02:00
elafargue
4f248172a3
Fix flight mode dial SVG to show the complete status.
2011-06-07 13:50:24 +02:00
elafargue
b6326b855d
OP-369 Implement help button and keyboard shortcuts as requested.
2011-06-07 07:01:58 +02:00
James Cotton
83916f3a4e
Fix bug in UAVTalk where the expected packet length check was incorrect for
...
instances of objects
2011-06-06 10:37:57 -05:00
elafargue
2a5ff0b36a
OP-369 : in case there is an objectID mismatch, still try to update the object if we found the name, but place it in "warning" mode. If during update some fields do not exist, then place in "Error" mode and prevent automated saving (will still try to update as many fields as possible)
2011-06-06 10:44:21 +02:00
James Cotton
1365542103
OP-493: Populate the Accessory Desired from TX
2011-06-05 15:38:57 -05:00
elafargue
ac7216946a
Now use the ".uav" extension for exporting settings in XML format. Dormant feature: if you use a .xml extension manually, will export in full format.
2011-06-05 19:02:43 +02:00
elafargue
3077dec24d
Merge branch 'bugfix-ground' into OP-369_Edouard_UAVSettings_ImportExport
2011-06-05 18:42:39 +02:00
elafargue
3d676d05df
Merge branch 'bugfix-ground' of git.openpilot.org:OpenPilot into bugfix-ground
2011-06-05 18:41:46 +02:00
elafargue
e5e85fa47a
Get rid of the "Request" button on the config gadget: it now tracks object updates and automatically keeps its state synchronized with UAVOBject changes.
2011-06-05 18:40:52 +02:00
James Cotton
2e089e2816
Changed text when using test output mode to remove deprecated comment about
...
arming.
2011-06-05 10:58:08 -05:00
elafargue
864dbb0ab5
Add an object saving completion message, so that the user knows when saving is finished.
2011-06-04 14:32:15 +02:00
elafargue
2387958422
OP-369 Now the import operation provides a summary and lets the user selectively save the right objects. Also improved the saveToSD queue a great deal so that it can deal with failed save operations (on non-existent objects).
2011-06-04 13:06:12 +02:00
elafargue
787b43fa0b
Merge branch 'bugfix-ground' into OP-369_Edouard_UAVSettings_ImportExport
2011-06-03 08:04:18 +02:00
dankers
5957612870
Remove old ini file, add a modelview item for the new CC model to ModelView
2011-06-03 12:18:37 +10:00
dankers
d3ae9113d9
Update file names
2011-06-03 10:31:45 +10:00
dankers
62c172f280
Add Nuno's wonderful CC model
2011-06-03 09:46:59 +10:00
elafargue
f4b19fe65a
OP-369 Settings Import/Export for the Airframe. Also sanitized UAV Object saving in flash in one central location in the uavobjectutils library.
2011-06-02 16:08:19 +02:00
James Cotton
f8b945401d
Merge branch 'bugfix-ground' of ssh://git.openpilot.org/OpenPilot into bugfix-ground
2011-06-01 14:20:54 -05:00
James Cotton
8f808df113
Fix for Utils trying to not include the debug library on OSX and Mac
2011-06-01 13:59:10 -05:00
James Cotton
45244e3df5
On OSX make the plugins in .app/Contents/Plugins instead of PlugIns
2011-06-01 13:58:49 -05:00
zedamota
ad65dee643
Added auto select
2011-06-01 18:40:04 +01:00
zedamota
fce8038cf4
Create new setting "autoselect"
2011-06-01 16:08:14 +01:00
zedamota
844bc79f45
Merge remote-tracking branch 'remotes/origin/bugfix-ground' into OP-512-PTDreamer
...
Conflicts:
ground/openpilotgcs/src/plugins/uploader/uploadergadgetwidget.cpp
2011-06-01 14:02:55 +01:00
elafargue
cacf03ae7b
OP-515 Uploader Gadget UI improvements. Not implemented Firmware pre-check yet.
2011-06-01 14:49:22 +02:00
Oleg Semyonov
b46c5dbff9
Merge branch 'packaging' into bugfix-ground
2011-06-01 13:08:48 +03:00
Oleg Semyonov
038eadb97a
Merge branch 'master' into packaging
2011-06-01 12:53:39 +03:00
elafargue
a953974dfa
Merge branch 'master' into bugfix-ground
2011-06-01 11:29:10 +02:00
David Buzz Carlson
2691b80576
Fix segfault on close. Fix _terrible_ variable naming. Fix excessive qDebug messages.
2011-05-31 23:31:40 -07:00
elafargue
4569446a7b
Merge branch 'bugfix-ground'
2011-05-31 22:57:21 +02:00
elafargue
bd35d9bff4
Forgot the configinputwidget.cpp file in previous commit.
2011-05-31 22:56:33 +02:00
elafargue
90024d69e4
Improve inline help icons, place them next to request/apply/save buttons where the eye logically goes when surveying the UI. Open for comments of course.
2011-05-31 21:20:38 +02:00
zedamota
fc7e7df863
OP-512 Remove some qDebug's
2011-05-31 15:41:05 +01:00
zedamota
1ffc0e3d56
Ground/OP-512- Autoconnect option, configured trough the options menu. Default is ON.
2011-05-31 15:29:53 +01:00
David Carlson
614fd138e4
Change the help button setup from in-line help to one per page. Will no longer open an HTML window, but will open the relevant section on the wiki using the OS default browser.
2011-05-31 00:16:01 -07:00
Oleg Semyonov
03ed76cf14
Merge branch 'bugfix-ground' into packaging
2011-05-30 16:56:37 +03:00
elafargue
887a23a3cf
OP-510 Issue with patch in source file, sorry.
2011-05-30 07:38:37 +02:00
elafargue
46824dea4e
OP-510: wider fix for Yaw channel servo fix which should improve the 'mixer not saving' issue too, as well as retrieving settings from the board for Yaw mode.
2011-05-30 07:29:26 +02:00
elafargue
93dd254c77
Merge branch 'bugfix-ground' of git.openpilot.org:OpenPilot into bugfix-ground
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configairframewidget.cpp
2011-05-30 07:26:44 +02:00
David Carlson
eb337c6e5c
Fix for tri yaw channel being reset.
2011-05-29 21:07:22 -07:00
zedamota
144ca219a5
Cosmetic changes to Uploader Gadget Rescue mode
2011-05-30 03:08:24 +03:00
Oleg Semyonov
91f5fd2318
Merge branch 'os_gcs-version-info' into packaging
2011-05-30 02:56:11 +03:00
James Cotton
df69bbb950
Merge commit '07a48573ea828685f0465786e16dd13db68a850f'
2011-05-29 17:08:17 -05:00
PeterG
d18a229a76
Change default settings format from ini to xml
2011-05-29 14:02:10 +02:00
zedamota
d591d509ed
Merge remote-tracking branch 'remotes/origin/PT-bugfix-ground' into bugfix-ground
2011-05-29 10:57:57 +01:00
PeterG
8b80b35964
Remove " Gadget" from gadget names since it adds nothing useful.
2011-05-29 09:51:39 +02:00
PeterG
3a7f8c7fc5
Remove empty options pages for config, pipxtreme and uploader gadgets.
2011-05-29 09:42:26 +02:00
elafargue
b702db2549
OP-510 Fix for setting tail servo on tricopter, and retrieving tail servo settings. Please test thoroughly and report!
2011-05-29 09:37:19 +02:00
PeterG
ba4a060c27
Changes to allow icons to be displayed for gadgets in the options page and in the gadget dropdown list.
...
Also, allow gadgets to have exactly one configuration only, which gives them a bit more real estate in the options page.
For gadgets to use this, call functions setIcon(QIcon) and setSingleConfigurationGadgetTrue()
in the constructor of the gadget factory, e.g.:
SystemHealthGadgetFactory::SystemHealthGadgetFactory(QObject *parent) :
IUAVGadgetFactory(QString("SystemHealthGadget"),
tr("System Health Gadget"),
parent)
{
setSingleConfigurationGadgetTrue();
setIcon(QIcon(":/core/images/openpilot_logo_64.png"));
}
2011-05-29 09:32:42 +02:00
elafargue
07a48573ea
Merge branch 'bugfix-ground' of git.openpilot.org:OpenPilot into bugfix-ground
2011-05-29 08:59:21 +02:00
elafargue
da887d3f2e
OP-513: Endianness problem on GIT revision and Date display on uploader gadget. Fixed, please confirm on your own architectures?
2011-05-29 08:58:14 +02:00
Stacey Sheldon
3a755dcdbb
gcs: fix id of quad-x image in SVG
...
The quad-x image was missing in the GCS config gadget.
GCS expects the quad-x image to have id=quad-X (upper
case X).
2011-05-28 22:17:40 -04:00
Oleg Semyonov
8c6526cf25
gcs: add git version info to the About dialog using version-info.py
2011-05-29 00:27:07 +03:00
PeterG
ce3196c33c
Changes to the tree view to the left on the options page.
2011-05-28 20:10:06 +02:00
elafargue
cf74908bcd
Merge branch 'bugfix-ground'
2011-05-28 19:30:04 +02:00
elafargue
79c2c16ae4
Fix: Y6 multirotor drawing was wrong for motors 3 and 4.
2011-05-28 11:21:07 +02:00
Oleg Semyonov
f676859854
package: (win) make SDL.dll mandatory for packaging, add some comments
2011-05-28 11:46:06 +03:00
zedamota
7f5c9b6c43
Cosmetic changes to Uploader Gadget Rescue mode
2011-05-27 11:49:15 +01:00
elafargue
39c2f074f2
Merge branch 'master' into bugfix-ground
2011-05-27 07:53:05 +02:00
Oleg Semyonov
6420eaf22f
Merge branch 'bugfix-ground'
2011-05-27 08:51:57 +03:00
dankers
97e383afce
Small text fix for windows and Mac, praying it works on linux
2011-05-27 14:31:58 +10:00
Oleg Semyonov
a715012184
Merge branch 'windows_installer' into bugfix-ground
2011-05-26 00:30:11 +03:00
elafargue
9cb380fba3
Make sure the "Advanced" settings is not selected by default in the airframe config UI.
2011-05-25 21:25:29 +02:00
elafargue
3edd7e3c3d
Support for packaged firmware files (opfw) in the uploader gadget.
2011-05-25 21:23:22 +02:00
zedamota
ccd383c999
Fixes compile issues on windows with latest Qt
2011-05-25 16:15:01 +01:00
Oleg Semyonov
5dc28260ba
credits: fix mixed newlines and trailing spaces
2011-05-25 17:59:18 +03:00
elafargue
5b787272f5
OP-504 Attempt to fix the Rescue/Boot issue, and bugfix in firmware version display in UPloader gadget.
2011-05-24 08:15:57 +02:00
zedamota
b69402b7ab
This should fix the upload CLI tool.
2011-05-23 11:55:09 +01:00
Oleg Semyonov
cbdba940b5
OP-483: remove gcs/packaging subdirectory (not required anymore)
2011-05-19 13:08:54 +03:00
Oleg Semyonov
5b1e45a8df
OP-483: move Windows installer out of ground/gcs tree
...
In preparation for release build the Windows installer source is moved
out of ground/gcs source tree into release directory. It is also disabled
in the qmake source file and removed from top level Makefile.
2011-05-18 22:22:40 +03:00
elafargue
cc9fa772c0
Improvement: now the config output panel in the config gadget remains up to date all the time, no need to click on the "request" button after setting up the mixers.
2011-05-17 22:23:08 +02:00
David Carlson
21213dd3c5
Merge branch 'master' into OP-495_CheBuzz_HelpButtons
...
Conflicts:
ground/openpilotgcs/src/plugins/config/output.ui
2011-05-17 01:06:28 -07:00
David Carlson
b1ec27bd75
Add help buttons to the config gadget UI. Also connect all signals to its slot in configgadgetwidget.cpp. Also some very trivial .html help files.
2011-05-16 21:54:23 -07:00
elafargue
b2587a5b9f
Improvement & bugfix: now the output config tab in the config gadget only shows the channel assignments as labels, not dropdowns, and more importantly does not try to save them when clicking on save/apply!
2011-05-17 00:34:25 +02:00
elafargue
98f286a682
Uploader gadget improvements
2011-05-16 22:05:33 +02:00
elafargue
6dc6b45f1b
Merge branch 'bugfix-ground'
2011-05-16 20:10:20 +02:00
elafargue
3129c10d05
Bugfix (uploader gadget)
2011-05-16 20:09:51 +02:00
elafargue
65201ec81c
Improve Uploader gadget widget behaviour when clicking on halt & boot (prevent double clicking)
2011-05-16 20:03:41 +02:00
David Carlson
d076418895
Merge branch 'master' into OP-495_CheBuzz_HelpButtons
2011-05-15 19:36:38 -07:00
elafargue
6d566c27fe
Merge branch 'bugfix-ground'
2011-05-15 23:37:24 +02:00
elafargue
50f1e15f54
Aditional artwork for GCS (artwork directory), plus show basic board info when connected on the uploader gadget.
2011-05-15 22:48:18 +02:00
dankers
2c1caa957c
Add some more sounds to the complete sound set
2011-05-15 22:13:21 +10:00
elafargue
2d6b4dce55
Small fix to System Health gadget, to make it behave correctly when started while the connection is up already.
2011-05-14 16:31:59 +02:00
elafargue
3a17168708
Merge branch 'master' into bugfix-ground
2011-05-14 15:45:11 +02:00
elafargue
fab880a7d2
Improvement by pip1996 on opmpap widget, to limit update rate and solve the CPU hogging issue.
2011-05-14 14:47:49 +02:00
dankers
7fc87700cc
Fix the default config. The control gadget was on the config screen to help new users validate their inputs. Adding it back.
2011-05-14 17:59:20 +10:00
elafargue
f9212cda7b
Last minute default settings refinement.
...
CC Attitude UI improvement.
2011-05-13 08:24:34 +02:00
elafargue
d2cf5529bf
Merge branch 'bugfix-ground'
2011-05-13 07:55:42 +02:00
elafargue
dceae1a9b0
Make bargraph dials better (color and range for roll/pitch/yaw are now correct). Disable use of OpenGL by default on config to ensure max compatibility with all graphics cards.
2011-05-13 00:01:31 +02:00
elafargue
c65c1ac109
Merge branch 'bugfix-ground'
2011-05-12 17:02:39 +02:00
elafargue
ab7fdfcc1f
OPReview-40 : Disable min/max output channel range controls when doing a servo test, in order to avoid mistakes by careless users.
2011-05-12 16:32:38 +02:00
David Carlson
5bddbc4108
Add help buttons at relevant places within config gadget. This is only the UI change and the buttons have no effect currently.
2011-05-12 03:37:34 -07:00
James Cotton
55fbb5413b
Merge branch 'bugfix-ground'
2011-05-11 20:22:52 -05:00
James Cotton
69c27aa1ce
Move "zero while arming" option to below other CC Attitude widgets. Was
...
overlapping other fields.
2011-05-11 17:45:14 -05:00
elafargue
ca39cbe1fe
Merge branch 'bugfix-ground'
2011-05-11 07:16:11 +02:00
elafargue
d5fbc0be4d
Fix "Halt" command on Windows XP sp2.
2011-05-10 21:19:51 +02:00
elafargue
f904e09353
Merge branch 'master' into OP-307_Firmware_Description_Packaging
2011-05-10 08:31:25 +02:00
Oleg Semyonov
94c49ac6d0
OP-179: fix library dependencies
2011-05-09 21:05:23 +03:00
Oleg Semyonov
1cae0cd167
OP-179: final fix (builds on Linux and Windows)
2011-05-09 20:09:00 +03:00
Oleg Semyonov
75c5761506
Revert "Revert change for opmaplib, causes linking problems on Windows."
...
This reverts commit 822017953e
and fixes it to work on Windows too.
2011-05-09 19:36:17 +03:00
elafargue
1c09f85be2
Merge branch 'master' into bugfix-ground
2011-05-09 16:50:11 +02:00
elafargue
822017953e
Revert change for opmaplib, causes linking problems on Windows.
2011-05-09 16:48:46 +02:00
James Cotton
fb8417a0ff
Merge remote-tracking branch 'origin/op_475_476_calibrate_during_arming'
2011-05-09 09:23:16 -05:00
elafargue
262cc805b0
Updated opmap lib and opmap plugin to use the Utils::StoragePath correctly.
2011-05-09 16:09:35 +02:00
elafargue
a97efad8f9
Modify "StoragePath" to use the settings storage directory and not the home directory. Works on Linux.
2011-05-09 15:19:10 +02:00
elafargue
c36b6a715b
OP-451 Add a tooltip for input configuration channel reversal checkboxes, as requested.
2011-05-09 14:24:36 +02:00
elafargue
1f88060671
Merge branch 'master' into bugfix-ground
2011-05-09 14:21:11 +02:00
David Carlson
20fcfe186b
Merge branch 'bugfix-ground' of ssh://git.openpilot.org:22/OpenPilot into bugfix-ground
2011-05-09 02:57:22 -07:00
David Carlson
b89909756c
Increase accel bias samples to 60. Add debuging output if enabled during calibration. Add check for the possibility of multiple signals arriving before slot is disconnected and causing bias to be calculated incorrectly.
2011-05-09 02:55:05 -07:00
elafargue
9dc3dde2c8
Small UI fix to avoid labels looking ugly on config input panel.
2011-05-09 11:19:55 +02:00
James Cotton
785054a694
OP-475: Update HITL for the FlightStatus object
2011-05-08 16:04:26 -05:00
elafargue
a7b5a2d5f4
Merge branch 'master' into OP-307_Firmware_Description_Packaging
2011-05-08 21:28:24 +02:00
elafargue
4d58967e49
Now check board model and SHA1 hash of the file when uploading a packaged firmware.
2011-05-08 21:22:00 +02:00
Oleg Semyonov
f1ead62dec
Windows installer: remove trailing whitespaces in script file
2011-05-08 20:18:56 +03:00
Oleg Semyonov
3e0bb8a876
Windows installer: add option to run GCS after installation
2011-05-08 20:18:54 +03:00
Oleg Semyonov
0f7fc8168e
Windows installer: increase verbosity level to show stats
2011-05-08 20:18:53 +03:00
Oleg Semyonov
d228cefae2
Windows installer: always show language selection (even if it was set in the Registry)
2011-05-08 20:18:52 +03:00
Oleg Semyonov
60db758637
OP-179: Windows uninstaller: remove OpenPilot user profile subdirectory if empty
2011-05-08 20:16:20 +03:00
Oleg Semyonov
a3e59429d8
OP-179: Windows uninstaller: update mapscache location to be removed
2011-05-08 20:16:19 +03:00
Oleg Semyonov
0e60e24db7
OP-179: default GCS config: remove mapscache locations
...
Their locations in user profile have been changed,
see http://progress.openpilot.org/browse/OP-179
If they are defined as they were, they are not removed
by Windows uninstaller.
2011-05-08 20:16:17 +03:00
elafargue
4af0c562e3
GCS-side implementation: if a firmware is package with description 100 byte bin blob at the end, it will use it, and parse it back
...
if description is structured the same way.
2011-05-08 11:36:55 +02:00
elafargue
61007fd0eb
Update Arm status dial to reflect changes too.
2011-05-08 09:44:23 +02:00
elafargue
2b11fa6ee6
Add support for Gyro bias calibration upon arming configuration in the CC Attitude config gadget.
2011-05-08 09:33:54 +02:00
elafargue
f59e7f3410
Update default config to match new UAVObjects and avoid the GCS complaining.
2011-05-08 08:55:20 +02:00
elafargue
b61bd5bf31
Start of Uploader plugin parsing of packaged firmware. work in progress, not fully working yet.
2011-05-08 00:57:59 +02:00
James Cotton
10e55c25bc
OP-475: More changes to get the FlightStatus object to work for Armed and
...
FlightMode
2011-05-07 15:06:04 -05:00
Corvus Corax
97b483dc88
Merge branch 'bugfix-ground'
2011-05-06 15:00:10 +02:00
dankers
db0f7c39c3
Update the RSS feed URL, will only shown when new site is live.
...
Add reviews site to the list of sites.
2011-05-06 14:34:18 +10:00
elafargue
b0baee3d17
Hooked the autoupdate on CC Attitude widget on autopilot connect.
2011-05-05 23:02:42 +02:00
James Cotton
7e418866be
Update the AttitudeSetting object to make the board rotation more human
...
readable and update the GCS fields appropriately.
2011-05-05 13:04:56 -05:00
Corvus Corax
bff970d414
GCS: notifyplugin: fix casing in phonon include to lower case. Qt ships phonon in lower case directory.
2011-05-05 19:37:23 +02:00
elafargue
6845a77571
Add GPL & authorship info to experimental PowerLog utility in the soruce repository.
2011-05-05 14:54:18 +02:00
James Cotton
80d4589743
Add assert when enum set to invalid value
2011-05-05 01:23:43 -05:00
James Cotton
3d3a4e9572
OP-481: Make max TurboPWM through Config gadget 400 Hz, and change tabstop
...
order to make more sense.
2011-05-05 01:13:58 -05:00
James Cotton
21a71e5294
Merge branch 'master' into spin_while_armed
...
Added back the "Spin arming" button to output panel and made it work
Conflicts:
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/output.ui
2011-05-05 00:23:51 -05:00
dankers
6d30da68e6
Windows backslash issue for an icon, thanks Buzz!
2011-05-04 20:06:24 +10:00
dankers
35f787dde6
Slight update to default config
2011-05-04 19:48:18 +10:00
dankers
b10f1db55e
Update ah.png icon
2011-05-04 19:31:56 +10:00
dankers
5a5e878a80
State we are a alpha release
2011-05-04 19:08:03 +10:00
dankers
f21e33833e
Add one more icon
2011-05-04 18:50:50 +10:00
dankers
12fd32eb96
Use new icons for the workspaces
2011-05-04 16:27:38 +10:00
dankers
69192f0594
Add some new icons for the GCS
2011-05-04 15:46:05 +10:00
dankers
5e355e82bf
Default background less crowded and cleaner
2011-05-04 13:07:22 +10:00
elafargue
4c80b458c4
OP-468 Config gadget now detects CopterControl and Mainboard and updates its controls to setup TurboPWM accordingly.
2011-05-03 16:50:31 +02:00
elafargue
9c4fa5214e
Better default configuration more suited for CopterControl.
2011-05-03 13:41:53 +02:00
elafargue
d4a021242c
Bugfix: in some rare cases, the GCS could crash if the Scope Gadget configuration contained a non-existing UAVObject name.
2011-05-03 10:54:38 +02:00
David Carlson
46566d05e8
The "Dave is not a robot" bug. Small case change for config gadget artwork, quad images.
2011-05-02 23:25:54 -07:00
James Cotton
bd06f156da
OP-474: Config gadget option for the "spinning while armed" check box
2011-05-03 00:42:47 -05:00
dankers
3103fc8e13
Update shapes to have a more subtle shade of red
2011-05-03 12:38:24 +10:00
James Cotton
e75e6c86ea
Merge branch 'master' of ssh://git.openpilot.org/OpenPilot
2011-05-02 16:19:32 -05:00
James Cotton
028b731a5b
Make the boards look better in the Uploader gadget
2011-05-02 16:19:19 -05:00
elafargue
ff51e996f6
Make config gadget artwork on transparent background, as well as curves. Looks much much better!
2011-05-02 22:56:01 +02:00
elafargue
37359a82b9
New SVG rendering of multirotor shapes for the config gadget, thanks Haalvard!
2011-05-02 22:18:26 +02:00
James Cotton
d9221fac06
Merge remote-tracking branch 'origin/OP-452_InputConfiguration'
2011-05-02 03:40:59 -05:00
James Cotton
1f36e00287
Merge remote-tracking branch 'origin/OP_442_OP_437_PT_Dreamer'
2011-05-02 03:34:09 -05:00
elafargue
2c89d34e2a
Merge branch 'master' into OP-367_UAVObject_Query
2011-05-02 09:14:21 +02:00
elafargue
30751b4eb2
OP-463 Fix Phonon includes for better cross platform compatibility.
2011-05-01 15:19:36 +02:00
elafargue
874ac25d8b
Merge branch 'master' into OP-367_UAVObject_Query
2011-04-30 23:48:45 +02:00
elafargue
b2f62e724b
OP-456 OP-459 OP-460 and OP-461 fixed.
2011-04-30 23:43:01 +02:00
elafargue
358902156c
Merge remote branch 'origin' into OP-367_UAVObject_Query
2011-04-30 21:42:34 +02:00
James Cotton
46ea18f54b
OP-449: Just UI layout to make longer message fit
2011-04-30 12:49:43 -05:00
elafargue
6b00ed3866
NACKs implemented on both ground and flight side, connect time goes under a few seconds now.
2011-04-30 19:32:42 +02:00
elafargue
1c6d760371
Updates on ground side, corrected bugs.
2011-04-30 17:50:36 +02:00
elafargue
f234651d9c
Implemented NACKs on UAVTalk on the ground implementation.
2011-04-30 16:52:07 +02:00
James Cotton
5ef47a1253
OP-449: Changed message in input configuration to correctly describe situation
...
where channels not mapped so receiver is not detected
2011-04-29 18:00:20 -05:00
zedamota
42c2b7193a
Should fix the impossibility to choose a non existing file to download FW to.
2011-04-29 21:50:58 +01:00
elafargue
61e8df8b20
Implemented stabilization tuning UI improvements as per OP-429.
2011-04-29 22:39:24 +02:00
elafargue
9e26d7edcc
Feed Forward settings now moved to "Advanced" tab. Will initiate review.
2011-04-29 22:25:31 +02:00
elafargue
cdc0839e6e
Move the feed forward settings to a "Advanced" tab: not thoroughly tested yet, but feedback welcome at this stage.
2011-04-28 16:53:00 +02:00
elafargue
dd7c6820f1
Merge branch 'master' into OP-320_Erase_all_settings
2011-04-27 14:30:46 +02:00
James Cotton
819bc9d441
Merge branch 'master' into OP-430_Ligi_UAVTalk-Code-Review
2011-04-26 12:49:32 -05:00
elafargue
53685faabe
Update dialog on configplugin
2011-04-26 19:27:29 +02:00
elafargue
c49382cdec
OP-444 : changed the error message to a QMessageBox as requested.
2011-04-26 18:02:32 +02:00
elafargue
921fe640a8
Forgot a small change to make sure that in case the request times out, we get an error.
2011-04-26 00:53:37 +02:00
elafargue
ce6987ffab
Added a menu entry in the Tools menu to erase all settings.
...
Note: on CopterControl, this fails if all settings are at default value sometimes, due to something going on flight-side, not quite sure what.
Please test & report how it is working on your board, be sure to save your settings somewhere first!
2011-04-26 00:45:08 +02:00
Oleg Semyonov
2ca0dc72cc
No more .svn r/o subdirectories, no need to remove them
2011-04-24 20:17:44 +03:00
Oleg Semyonov
af8e7c38f8
Change version info scripts to use git instead of SubWCRev svn utility
2011-04-24 20:15:59 +03:00
marcus bueschleb
93358ee4ae
rm useless code
2011-04-20 11:38:20 +02:00
elafargue
f0bfffda09
Merge branch 'master' into OP-372_Edouard_UDP-connection-menu-name
2011-04-18 08:44:58 +02:00
dankers
309929245b
Add help icon to config gadget, had this hanging around for a while, just getting ready for move to Git.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-17 09:04:09 +00:00
Edouard Lafargue
cd1922cd52
Now the dropdown menu behaves better with unconfigured IP connection plugin. Restored the
...
type of connection for better clarity too ("Serial", "USB", "IP", "UDP", etc).
2011-04-17 08:34:35 +02:00
corvus
08eabd21e4
Fixed files with mixed line endings
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3168 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-15 12:03:20 +00:00
peabody124
3afdc7e41c
CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS
...
config plugin updates. Has not been tested in flight yet although seems
sensible so please be careful when using this code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-15 06:37:16 +00:00
peabody124
9c4432b097
Fix tricopter configuration. 2946 for a second rudder had a bug.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-11 18:47:50 +00:00
pip
697b8d2a13
Fixed problems that blocked compiling on Windows
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3153 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-11 10:07:06 +00:00
jonathan
55cba70bd7
spellcheck comments: no substantive changes
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3149 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 18:32:19 +00:00
jonathan
c57ea90657
OP-191: Refactor some routines that will be common to both coarse and fine calibraiton;
...
Save the aircraft's initial calibration scalers and restore them in the case of a calibration failure;
Add sanity checks for calibration scale factors to prevent making things worse in the face of a failure;
Correct sign of the gyro_bias when resetting this value to its default;
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3148 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 18:29:53 +00:00
jonathan
8f26a6fa83
OP-191: Spellcheck comments. Also, prevent an infinite loop in the case of a terrible calibration point set.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3147 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 18:25:52 +00:00
edouard
92944dcfcb
OP-374 Disable "Rescue" button during rescue procedure, to avoid people pressing it twice...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3145 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 08:46:41 +00:00
edouard
7f445c8a08
OP-375 Also update in share directory for GCS installation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3144 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 08:37:52 +00:00
edouard
e8b4ef6954
OP-373 Uploader gadget now checks whether the autopilot is connected already when it starts, so that it displays the right state.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3142 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 08:23:03 +00:00
edouard
103b290cc5
OP-376 More updates for DIal plugin config page.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3141 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 08:18:45 +00:00
edouard
0f9fb49fbc
OP-376 Make the Analog dial plugin options page display much better when resizing the dialog.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3140 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 08:13:29 +00:00
dankers
d1aa380b01
Minor change of the messages displayed. In a smaller screen size this save the gadget shifting slightly for the longer message.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3139 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-10 03:44:58 +00:00
edouard
f29f0477d4
Make tooltips and text even more clear for arming procedure.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3135 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 15:37:57 +00:00
ligi
8e7fd4da81
adding juavtalk
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3132 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 04:32:26 +00:00
ligi
23ab893f38
updating readme on how to build jar
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3130 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 04:25:42 +00:00
ligi
2d315d791a
adapt to path changes in build dir
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3128 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 04:08:57 +00:00
edouard
640e9afc39
OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3127 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-08 20:17:41 +00:00
edouard
da6530537b
OP-347 Implement the option to reverse the input controls on the config gadget: this is mostly useful for people with TX which do not offer this option. Tested on my small hex.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-03 06:47:07 +00:00
pip
5c69e94e83
Fixed min/max code error.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3119 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-02 12:49:58 +00:00
pip
aa84845c1e
Added the option to link output channels when in "Test Output" mode - useful for testing quads, hexes etc.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3118 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-02 11:58:19 +00:00
zedamota
fca5a42949
OP111/OP112/CC38/GCS
...
CC-38 - Map now has Dragons.
OP-111 - Added the capability to plot trail lines. Trail dots/lines can now be shown/not_shown by selecting the option on the maps context menu.
OP-112 - UAV icon on the map is know selectable on the maps options page.
Also fixed an issue with the UAV/Trails not being shown while replaying logs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3117 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-01 19:21:17 +00:00
corvus
63f4ba514f
GCS/HITL/Xplane9 - added correct quaternion calculation
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3115 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-01 15:11:09 +00:00
edouard
89061ac606
OP-357 Config gadget now checks whether the autopilot is connected already when it is instanciated.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3114 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-31 20:48:43 +00:00
edouard
ae32af82b1
Bugfix: swapped ProductID in the USB constants!!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3113 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-31 20:16:40 +00:00
corvus
b78c3ad0a8
GCS:Hitl/IL2: no explicit updates since periodic updates now work
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3109 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-30 20:31:22 +00:00
corvus
ff3ed79bdf
GCS:plugins/uavtalk/telemetry.cpp bad Bug in processPeriodicUpdates, remaining time updated in copy instead of original object, never got stored.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3108 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-30 18:50:27 +00:00
corvus
a4cbbfd016
GCS/Plugins/HiTL: Updated Xplane to provide correct measurements for all Stabilization and Guidance relevant data. Based on Export format for Xplane 9!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3107 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-30 15:59:53 +00:00
zedamota
282661734e
OP309/OP179/GCS - Fixes maps cache location not being selectable, now defaults to "C:\Users\name_of_user\AppData\Roaming\OpenPilot\mapscache" on windows, no idea where this goes on nix.
...
Also tried to fix crashes seen on Mac, but I'll need a Mac or a stack trace to do a better job.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-30 15:57:53 +00:00
edouard
b125e51251
CC-33 Now the config panel only shows the relevant panel once the board is connected.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3105 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 20:32:09 +00:00
zedamota
06826840aa
OP356/GCS - Update uploadergadgetwidget to cope with latest changes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3104 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 18:43:53 +00:00
zedamota
6bcacb1630
OP356/GCS - Makes the dropbox show devices "friendly name". Type of connection and previous serial number accessible via tooltip.
...
Kind of hacky, we should refractor connectionManager but that can wait for after V1.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3103 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 18:25:24 +00:00
peabody124
cebca6f67e
OP-349 CC-32: Improved the object save confirmation logic. It's got a lot of
...
checks in there so pleaes let me know if people get any segfaults.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3099 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 01:29:56 +00:00
peabody124
4326a323e4
OP-353: Display confirmation when testing motors advising to remove propellors
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3098 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 00:15:56 +00:00
peabody124
aabe652451
Improved transmitter icon. Thanks Murlaha!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3097 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 00:15:38 +00:00
peabody124
f09763b0a6
OP-36: Remove debug
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3096 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-29 00:15:27 +00:00
peabody124
1e8e2f89fd
OP-36: Save button for CC attitude bias
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3095 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 21:31:44 +00:00
edouard
57adfdb708
CC-39 Have GCS detect whether the board is a CC or an OP, and update the INS calibration widget accordingly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3094 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 21:15:44 +00:00
peabody124
48c20d37a9
OP-349 CC-32: Added a Completed operation that is returned after successful
...
save or load
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3093 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 19:16:50 +00:00
peabody124
687d4f7cc8
OP-36: Forgot some files with previous commit
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3092 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 19:16:38 +00:00
peabody124
e70fe52966
CC-36: Added panel to config gadget for zeroing the bias on CC. Ed will make
...
the appropriate window show for CC or OP calibration.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3091 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 18:43:15 +00:00
peabody124
cdb521ac4a
OP-328: Use removal callback when device unplugged and also added mutexs to
...
protect the list of devices from race conditions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3089 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 15:39:35 +00:00
peabody124
852e6072c3
Break the input and output configuration into separate config gadgets
...
Anyone who wants to, please improve my transmitter icon. I am not an artist.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3088 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 15:39:22 +00:00
sambas
64cacc2c69
Better init values for gyro_scale, I had problems getting gyros calibrated.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3087 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 15:29:21 +00:00
peabody124
3bdcdb94fa
Make the Eigen library compile on OSX again
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3085 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 10:41:10 +00:00
peabody124
c0d481431c
OP-354: Layout out the flight mode settings a bit more intuitively and so the
...
labels are properly shown
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3084 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 10:40:46 +00:00
peabody124
4120937391
OP-364 OP-191: Convert the OPMap setting of HomeLocation to mGau to match the
...
changes in flight code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3083 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-28 10:40:26 +00:00
jonathan
9b8494e9f6
OP-350: Resolve this bug by explicit local stack alignment annotations. The Win32 ABI only guarantees an 8-byte aligned stack, but SSE requires 16-byte alignment.
...
OP-191: Include code for computing the misalignment rotation, but #ifdef it out until the feature freeze is lifted.
OP-191: Clean up UI to inform the user that HomeLocation must be set prior to multi-point cal, and disable multi-point cal's start button until it is done.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3082 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-27 20:26:29 +00:00
edouard
1ef9eceac5
Lower amount of debug output in Linux USB Monitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3079 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 11:57:16 +00:00
edouard
332cafa8b8
Improve behaviour of Uploader gadget whenever the board does not manage to get into bootloader mode.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3075 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 11:22:31 +00:00
edouard
34fffd0e50
CC-39 New helper function to get the Board model (synchronously). Will be used by config gadget to dynamically load the right interfaces for the board type.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3073 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 01:25:26 +00:00
edouard
81269f786e
USB Stability fixes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3071 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 14:50:23 +00:00
erhard
79c4b2fe76
OP-358 GCS: Just keep the default dials in the dials showcase
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 13:05:29 +00:00
edouard
8a6f83e232
OP-352 Reorder config gadget widget to have a more logical order.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 12:16:49 +00:00
edouard
417e637904
Sorry...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 11:24:27 +00:00
edouard
9d0ce95b37
Attempt to fix GCS crashes on USB disconnect: please confirm on other operating systems it is still working fine in all situations.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3066 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 10:59:24 +00:00
chebuzz
c00090391b
OP-342 GCS/ModelView - Update glc_lib to newest 2.1 release (fixes known issues) and update modelview to use this new lib.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3063 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-22 21:15:46 +00:00
peabody124
593ccfad7b
OP-334 USB HID now working again on mac
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-22 11:50:26 +00:00
jonathan
32430a3b15
OP-191: Merge from full-calibration branch. Replace 6-point calibration with multi-point TWOSTEP-based calibration. Currently uses 22 points, but can scale up or down as needed. Simultaneously computes gyro bias, accelerometer bias, accelerometer scale factor, accelerometer orthogonality, magnetometer scale factor, and magnetometer bias calculations.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3058 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:54:09 +00:00
jonathan
baf848d4f0
Attempt to get a useful error string when we cannot connect to a USB device;
...
Fix typo.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3056 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:50:15 +00:00
jonathan
44e3466e0a
OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3053 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:45:40 +00:00
jonathan
e40f6752bd
OP-191: Merge from full-calibration branch. Import Eigen 2.0.15 to the GCS. Add the bits that eclipse missed the first time around.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3052 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:44:22 +00:00
jonathan
bf191fed27
OP-191: Merge from full-calibration branch. Import Eigen 2.0.15 to the GCS.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3051 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:43:09 +00:00
edouard
f2a7f8e187
Add Powerlog plugin to plugins.pro (disabled)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3050 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:55:43 +00:00
edouard
11f7766ab4
Raw HID plugin: improve initialization in case another plugin wants to use the USBMonitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3049 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:55:02 +00:00
edouard
d10dd33016
This is a GCS plugin which adds an entry in the 'Tools' menu to get the output of the Junsi PowerLog6S. This plugin is not enabled by default.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3048 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:54:23 +00:00
fredericg
ef1dcf6939
rename batterysettings.xml => flightbatterysettings.xml
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3046 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-19 18:31:58 +00:00
edouard
03a5e78897
Junsi Powerlog utility: output data in CSV format, so that it is actually useful. Works great to make graphs.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3044 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-17 18:12:08 +00:00
chebuzz
1e59cc79ec
GCS/MagicWaypoint - Missing dependency for magic waypoint in .pro file that caused build to fail when using multiple jobs (-j2, -j12, -jX...)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3043 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-16 08:04:44 +00:00
edouard
7100c2e9cd
Better phrasing for telemetry configuration interface.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3041 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-15 14:24:40 +00:00
edouard
823f814d85
OP-330 Log replay does not crash at the end anymore.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3039 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 22:27:26 +00:00
edouard
c355dfff44
OP-250 Update menu entry for logging so that it reads "Stop logging" when logging is going on.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3038 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 21:23:26 +00:00
edouard
2d847fe4d7
Update OpenPilotGCS.ini (default config) to use the latest artwork and dials configuration.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3034 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 16:15:30 +00:00
edouard
89fc8141fc
OP-228 Make System Heal gadget aware of link status (autopilot connected/disconnected). A new version of the diagram is bundled which displays the status, you will have to update your configuration to use it.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3033 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 15:08:02 +00:00
edouard
581d2497c8
OP-247 Scope gadget: restore checked/unchecked state of curve legends when unhiding.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3032 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 14:14:52 +00:00
edouard
afb7aaf374
OP-334 : reverted opening method in RawHID plugin, as the new pjrc_rawhid class does not play nice with the USBMonitor system in case several devices with the same PID/VID are present on the system (such as two PipX for example)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3031 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 13:03:11 +00:00
corvus
9859829fcc
HITL/IL2: Fixed calculation of AttitudeRaw.accel[XYZ]
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3025 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 20:16:31 +00:00
zedamota
e1eaf4d132
OP GCS/HID - Now found the true problem, I just need to find an hungry French monkey now.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3024 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 18:52:44 +00:00
zedamota
162deda2ba
OP GCS/HID - Fixes a problem created with the conversion of the monitor class to singleton. I don't quite understand the problem so this is just a quick fix. Also changed PipXtreme gadget to use new PID.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3023 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 18:42:32 +00:00
edouard
cb95edaedc
Upate RawHID plugin to cope with the new PID/VIDs
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3021 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 18:55:06 +00:00
edouard
bfed85a9b0
Update uploader gadget to use the USB monitor to get the list of available devices.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 00:07:07 +00:00
edouard
51a8a2d525
OP-334: Make the USBMonitor a singleton and export its symbols in the RawHID plugin, so that other plugins can use its instance(). Also implement a way
...
to ask for devices in bootloader or running mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 23:59:29 +00:00
edouard
6dcb9b2dcc
use constants in the rawhid plugin instead of hardcoded VID
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:16:50 +00:00
pip
5c7e74e169
Removed commented out un-used signal/slot
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:07:41 +00:00
pip
69b930899c
Removed un-needed signals.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3002 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:06:57 +00:00
edouard
191df1a118
Small utility to parse the output of a Junsi PowerLog6S, should work on Linux, Windows & Mac. Testbed for the HID library and USB device detection we're working on, not directly related to the GCS...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:00:26 +00:00
edouard
18a39c964e
Corrected several typos in the device detection code, improved Linux detection (more efficient).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3000 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 21:50:13 +00:00
edouard
c1546d818f
OP-328 Stub for MacOS support of USB Monitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2999 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 20:38:34 +00:00
edouard
61c8ea9185
OP-334 Now fill the bcdDevice and other fields (except HID page info) on Linux too.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2994 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 22:57:34 +00:00
edouard
cc1a53417d
Barometer in High-contrast theme was missing from the share directory. Added.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2991 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 17:34:28 +00:00
osnwt
6a0a8f00c9
OP-305: fixed syntax error when building on Windows under sh
...
Line:
$(CHK_DIR_EXISTS) dir $(MKDIR) dir
under cmd translates into
if not exist dir mkdir dir
but under sh it becomes
test -d dir mkdir dir
which is syntax error.
So CHK_DIR_EXISTS removed, MKDIR made unconditional.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2989 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 13:38:30 +00:00
zedamota
0eb0f4365a
OP GCS/HID - just added the Usage field to the USBPortInfo struct.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2977 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 15:58:17 +00:00
sambas
8fb82584b1
removed some redefined warnings in windows
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2976 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 13:51:29 +00:00
pip
5c01155c4f
oh ***! .. to early on a Saturday morning to be doing this .. sorry.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2974 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:55:38 +00:00
pip
1db840ed8a
Correct mistake just made in "ConnectionManager::connectDevice()"
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2973 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:19:37 +00:00
pip
7fe74cda15
We weren't closing the device (after opening it) if "io_dev->isOpen()" returned false in the "ConnectionManager::connectDevice()" function.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2972 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:17:18 +00:00
edouard
e290d37df5
Fix logging gadget for replay speed setting.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2969 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 23:22:49 +00:00
pip
63d919dbbe
Removed monitor (SIGNAL/SLOT) for deviceClosed event. will remove the device closed stuff in rawhid if alls well later
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2968 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 23:16:51 +00:00
zedamota
ea5d4367b4
OP GCS/HID - function to filter based on VID/PID
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 20:49:18 +00:00
pip
fe6b41e6f9
Fixed problem with GCS crashing in windows when GCS exits still connected to USB device
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2964 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 20:42:47 +00:00
zedamota
492152d506
OP GCS/HID - 3rd try, sorry guys
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2963 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 19:26:11 +00:00
edouard
f2fc9b03d4
OP-334 Better exit code for the RawHID plugin (termintes usb monitor)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2962 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 09:59:43 +00:00
zedamota
3e52d08b2b
OP GCS/HID - BIG fix
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2959 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 02:17:46 +00:00
pip
f8f25bf2d2
Added exception catches in known problem areas if GCS is closed while it's still connected to a USB device.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2958 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 22:03:03 +00:00
edouard
e4535ed575
OP-334 OP-332 Linux usb monitor working fine now, and rawhidplugin.cpp updated to use this new mechanism, no more polling thread opening the device every second!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2957 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 21:44:59 +00:00
zedamota
623bdb6298
OP GCS/HID - small fix
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2956 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 21:14:56 +00:00
zedamota
18eef2f532
OP GCS/HID - Moved notifications to a new class
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2955 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 21:03:24 +00:00
edouard
086f78b6b8
OP-334 Progress on USB Monitor, compatible with both Win32 and Linux
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2954 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 21:00:37 +00:00
edouard
cd3168d123
OP-334 Further work on USB Monitor, incl. Win32 stub.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2952 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 16:58:48 +00:00
edouard
1c89211df1
... sorry
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2950 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 13:43:45 +00:00
edouard
c01329810a
OP-334 Linux start of implementation and Windows stub to enable compilation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2949 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 13:41:13 +00:00
edouard
28d4bbbcfb
OP-332 Linux work in progress implementation (not compiled right now)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2948 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 11:37:09 +00:00
edouard
bce469c184
OP-334 header file for usb monitor object, work in progress.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2947 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 08:46:56 +00:00
scott
afc788bea4
Added 2nd rudder to fixed wing config. This is necessary for flying wings, in particular, that have rudders on the wingtips.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2946 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 05:33:51 +00:00
edouard
870242d456
Changed the save GCS settings menu text to a more precise description since there are now three elements which can be saved..
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2937 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-02 13:10:04 +00:00
peabody124
c21e9f74b3
OP-329 Make the stabilization mode config gadget compatible with new mode.
...
Feel free to revert the layout change part - but I'm trying to make it clear
that "stabilization1" no longer naturally matches "position1"
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2936 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-02 01:25:47 +00:00
peabody124
8930ec01de
OP-313 Quaternion based stabilization, gets rid of lots of checking angle
...
signs, should be stable for all orientations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2932 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-02 01:25:34 +00:00
osnwt
52643dd6c6
OP-305: remove r/o attributes from copied .svn/* files (share.pro)
...
Those files are copied to make built GCS self-contained, but share.pro also
copies hidden and r/o SVN files. With them on Windows cp -rp can't copy over
old build, and rm -rf can't remove them.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2928 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-01 22:23:12 +00:00
pip
eb5b97ca3a
Added widgetbar for RSSI indicator because QProgressBar going in large steps.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2925 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-01 10:50:42 +00:00
pip
1a83f0c461
Removed all references to widgetbar
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2924 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-01 10:50:04 +00:00
zedamota
53e18382b3
OP GCS/HID - Added functions to allow already connected devices to trigger the signals.
...
For this to work, signals have to be subscribed before calling "setUpNotifications()".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2921 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 21:01:02 +00:00
pip
4eec350318
Neutral position text is now correctly set on GCS start up on the RC input config widget.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2920 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 17:27:28 +00:00
pip
ffdfedfaa1
Reverted RC input config widget to using sliders to allow manual adjustment
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2919 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 16:44:04 +00:00
pip
6e12a2f04c
Fixed linux compile problem.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2917 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 10:15:56 +00:00
zedamota
b8a5249246
OP GCS - sorry made a mess dealing with conflicts
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2916 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 01:37:25 +00:00
zedamota
0c2a563c34
OP GCS - created USB connect/disconnect signals for windows using the system API.
...
Need to call setUpNotifications first!!!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2915 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 01:01:57 +00:00
pip
49170f0628
Monitor telemetry disconnection.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2914 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 00:35:11 +00:00
pip
a2cf1c4673
Now able (hopefully) to unplug USB device from PC whilst the GCS is still connected to it via USB .. in WINDOWS ONLY.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2913 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-28 00:34:31 +00:00
pip
011abe3117
Added deviceUnplugged emitted signal in windows version.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2912 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 23:14:04 +00:00
pip
ed4aefbb95
Removed unneeded mutex in the enumeration thread.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2911 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 21:15:32 +00:00
pip
f15bd6259e
Cosmetic graphical display changes to the RC input config display.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2909 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 19:52:03 +00:00
pip
4e89c1f245
Updated servo input level bars. Disable some buttons if no telemetry link with OP/CC.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2908 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 19:20:43 +00:00
pip
d38c44f529
Cleaned up and made the pjrc modules purely C++ - they were a mix of C++ and static C functions and data :( ... although NOT altered the MAC code - someone who knows MAC code needs to do that.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2906 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 17:07:41 +00:00
pip
e3b6a29bfd
Possible fix for mutex lockups on GCS exit
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2905 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 14:39:56 +00:00
pip
2eaedfe78a
Hopefully a fix to stop the GCS crashing on exit (in windows at least) if the GCS is still connected to a USB device whilst telemetry is in full flow.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2902 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 11:58:58 +00:00
pip
efd12532eb
clean up
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2901 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 10:27:04 +00:00
pip
47f9808e9f
clean up
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2900 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 10:26:50 +00:00
pip
4afdb8c478
clean up
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2899 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-27 10:26:18 +00:00
edouard
21a31df392
Better tooltips on stabilization config interface. Removed remaining "AHRS" references in the INS config interface.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2894 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 18:05:30 +00:00
edouard
f41cfc3d00
New CopterControl rendering in full SVG for the uploader gadget, should look much nicer than the previous pixmap.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2893 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 18:01:41 +00:00
edouard
b4cacbcf76
Sorry, had to change the connection detection, it makes the Linux library crash immediately...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2892 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 14:53:06 +00:00
edouard
dc9efb4d55
Added the Guidance and Attitude system alarms to the system health diagram.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2891 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 14:01:20 +00:00
edouard
4d76926561
Compile fix.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2890 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 13:53:50 +00:00
pip
770c623f34
Removed TestThread stuff
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2889 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 13:35:50 +00:00
pip
77cbc36ad5
Added object destroyed monitoring to the RawHIDEnumerationThread object to ensure it doesn't crash if it's parent (m_rawhid) is destroyed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2888 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 12:56:14 +00:00
edouard
6d00146a2b
Removed the availableDevChanged(QObject*) in rawhidplugin.h as it hid availableDevChanged(IConnection*) and prevented
...
the connection manager from getting the signal whenever a USB device is connected/disconnected. Any side effect on Windows?
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2887 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 12:01:00 +00:00
edouard
930928e6fa
OP-146 More tooltips for stabilization tuning. Someone double-check...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2885 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 09:11:53 +00:00
edouard
3b6ebdcd9f
OP-146 New gyroscope icon for the stabilization config gadget.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2884 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 09:03:30 +00:00
pip
70f1e4a3e9
Can't for the life of me remember what I updated this time!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2883 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 03:20:16 +00:00
pip
333d61192b
Stopped GCS crash on exit if USB is still connected - at least in Windows anyway.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2882 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-26 03:19:24 +00:00
edouard
6e431c29ba
OP-146 Max angles can now be adjusted from the stabilization config dialog.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2881 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-25 23:05:23 +00:00
edouard
495445c3a5
OP-146 Stabilization configuration: can now update stab settings in real time on the airframe, and link roll/pitch for easier adjustment...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2880 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-25 21:17:07 +00:00
pip
09786b763f
Changed the RC input sliders for vertical bars. Simplified some code areas.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2879 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-25 20:43:58 +00:00
pip
81baa9506a
Added 256Kbit/s RF datarate mode
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2877 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-25 11:40:02 +00:00
pip
5f22a885ad
oops! .. missing spelling of "#ifdef"
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2873 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-24 10:35:27 +00:00
pip
3883a561e4
Added option (#define USE_SCIENTIFIC_NOTATION) to use scientific notation (or not as the case maybe)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2872 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-24 10:31:23 +00:00
pip
223b3089ed
Added missing "parameterValueChanged(double value)" function in "configstabilizationwidget.cpp" .. wouldn't compile in windows without it.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2871 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-24 08:58:21 +00:00
edouard
3d26b4ec60
OP-146 Slow progress on the stabilization configuration UI. New approach, more efficient. Not functional yet but we'll get there eventually.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2867 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 23:06:35 +00:00
osnwt
a4fe867c1d
GCS: UAV Settings Export: added support for *.ini files.
...
INI file format is to be used for compact export to publish on forums, etc.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2866 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 20:27:36 +00:00
osnwt
bd665790c2
GCS: UAV Settings Export: added support for simple *.xml files.
...
UAV Settings files (*.uav) now include option lists for enum fields.
Simple XML files (*.xml) contain only subset of fields (name and values).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2865 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 20:27:19 +00:00
osnwt
606cc46ea1
GCS: New UAVObjectField::getTypeAsString() function is used for UAV Settings Export.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2864 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 20:27:05 +00:00
osnwt
da18ee67b1
Windows Installer: Ignored SubWCRev error (if, for instance, built not from an SVN working copy).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2863 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 20:26:50 +00:00
pip
20e95027b1
Changed the scopes minimum update period from 100ms to 10ms (for those that can have fast scopes)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2862 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 15:31:05 +00:00
pip
c819ac938e
A few clean ups to the spectrum scanning code (not yet enabled)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2860 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 09:35:30 +00:00
edouard
7d2b5ae744
OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.
...
The idea is to use a 'vernier' dial analogy, whereby you can either of course edit the values by hand in the config dialog, but you can also select the outer dial and adjust it with either mouse or keyboard (up/down and pgUp/pgDn).
Eventually, there will be a tab for the P factor, a tab for the I factor, and a tab for the rest of the adjustments (rate limits etc).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2847 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-22 22:03:32 +00:00
pip
931102bf37
Added more error checking (checking for NULL pointers)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 15:33:20 +00:00
pip
3dcd93e66b
Added telemetry functions.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2834 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 15:10:06 +00:00
pip
1bb5ed54ff
Added save to SD card functions.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2833 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 14:14:59 +00:00
pip
5e501f3cae
Fixed Lat/Lon scaling in the GetHomeLocation functions.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2832 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 13:50:31 +00:00
pip
9b10842f5d
Updated some parts of the map plugin to use the new UAVObject utility.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2831 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 13:33:10 +00:00
pip
a5f17b148b
Added getGPSPosition() function to the UAVObject utility
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2830 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 13:32:22 +00:00
pip
d666a61bf5
Created a new UAVObject utility plugin to make UAVObject access much easier for all plugins
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2829 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 13:21:02 +00:00
pip
ba7e7ba85d
Check for error returned from homelocation util.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2828 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 11:17:30 +00:00
pip
4a1842f3be
Added code to check for invalid parameters.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2827 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 11:15:39 +00:00
pip
32ae936df5
Uses the new home location utility
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2826 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 11:09:20 +00:00
pip
7a34e25956
Added a home location utility
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2825 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 11:08:56 +00:00
edouard
06a8fdb45d
Change AHRS to INS in the config gadget widget.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2814 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 23:04:38 +00:00
osnwt
7af611139e
GCS Installer: fixed German translation, thanks to Wellenbrett
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2807 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-18 08:47:02 +00:00
corvus
015e49ee5a
some comments about gyro temp calibration added inbto the code
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2806 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-17 15:32:26 +00:00
corvus
50e78b4265
typo fix
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2803 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-17 01:51:49 +00:00
corvus
a91a35685a
IL2 add quaternion attitude and accels
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2802 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-17 01:51:45 +00:00
osnwt
fe2a43e07f
GCS: Fixed UAVSettingsImportExport plugin dependencies. Also unified comment capitalizations and fixed few descriptions. No code changes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2800 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-16 14:30:19 +00:00
pip
ac7cfcc358
Added "Ready-To-Send-Time" parameter adjustment
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2795 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 12:57:46 +00:00
pip
b10c1a4cad
Can now show/hide the scope legend by double clicking the scope.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2793 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 10:19:18 +00:00
osnwt
ceea6085b4
GCS: Remove ambiguity in UAV/GCS Settings Import/Export menu commands, add support for translation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2792 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 10:15:56 +00:00
andrew
c6e228e768
OP-299 Swashplate Levelling UI
...
Added core functionality for levelling routine
Added instructions to each step
Added warning dialog if user tries to interrupt levelling process
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2790 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 05:46:45 +00:00
pip
e8e27f9696
Smaller axis text size.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2784 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 00:44:33 +00:00
edouard
5bc0641d09
Fix a small typo in the tooltips of the config gadget.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2783 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 21:31:38 +00:00
pip
e2b22039f1
Darkend scope curve indicator area to try to make it easier to match the colour with a scope line.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2782 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 21:04:31 +00:00
osnwt
eec4959391
UAVSettings Import/Export plugin (import is not implemented yet).
...
This plugin registers itself in the GCS File menu and allows to save the settings database (all UAVObjects which have settings flag set) into an XML file. No import function is implemented yet, but the XML is human-readable and can be used to enter values by hand.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2781 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 20:11:41 +00:00
edouard
d0d5d2db4e
OP-308 Make actuators read-only and set them to zero when running calibration, so that engines cannot be started by accident.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2779 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 19:10:29 +00:00
edouard
bcdad47e1c
OP-308 Added a warning in red to warn users about engines connected during calibration.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2777 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 17:08:45 +00:00
pip
e5c56e462e
Oscilloscope now has finer lines for seeing detail.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2774 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 10:11:51 +00:00
edouard
40fc5f9618
More descriptive label for arming settings.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2767 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-10 22:36:42 +00:00
andrew
b793a33baf
OP-299 Swashplate Levelling UI
...
Minor graphics tweaks
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2764 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-09 05:04:07 +00:00
edouard
04ba1261f0
OP-311 New "Arming" tab in the config widget to setup how the airframe is armed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2763 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:49:33 +00:00
peabody124
d2e5c7c301
Ground/Config: Allow negative yaw for people whos motors are all backwards
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:42 +00:00
peabody124
58a0cce89b
Fix for OSX to enumerate serial ports correctly
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2756 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:38 +00:00
edouard
536123e9c3
OP-298 Flight mode position slider should now work properly in the config widget, please confirm it's OK for you too...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2749 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 14:29:05 +00:00
pip
73d134ad98
Removed unused code, bit of a clean up.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2747 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-07 12:29:35 +00:00
andrew
2496c41ea2
OP-299 Swashplate Levelling UI
...
More levelling UI basic functions implemented.
Not tested for Flight use at own risk
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2746 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-07 03:05:30 +00:00
pip
b2eb141c10
100mW appears to be working again. A few bug fixes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2745 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 21:21:50 +00:00
pip
6559615ef8
Made quite a few constants/#defines capitals (previously lower case)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 10:55:08 +00:00
erhard
d53bf143e8
OP-310 GCS Welcome Plugin: Prevent saving of configuration as workaround for OP-232
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2738 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 22:35:18 +00:00
erhard
0ab4ccef9d
OP-232 GCS Configuration: Add general Option to not save settings on exit.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2737 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 22:20:36 +00:00
erhard
250e154067
OP-231 OP-232 GCS Configuration: Commandline options to handle reset of configuration
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2735 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 21:00:48 +00:00
erhard
5eab9bf7e6
OP-232 GCS Configuration: Reset Settings. Proper functioning is blocked by OP-310.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2734 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 20:20:01 +00:00
dankers
037ff44436
Update RSS location, not final currently but enables me to test if it works.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2733 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 15:59:46 +00:00
erhard
eab8421e5f
OP-99 gcs Import/Export Plugin: Support configurable plugins
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2732 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 14:01:18 +00:00
andrew
0a70df7e5b
OP-299 Swashplate Levelling UI
...
More levelling UI not functional yet.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2728 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 05:30:42 +00:00
pip
41768be215
Allows modem mode to be set - BUT NOT YET IMPLIMENTED, use NORMAL mode for now.
...
Fixed bug in pipx plugin import function - wasn't restoring the AES key.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2726 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 23:00:48 +00:00
erhard
b0cc3d1f5f
OP-232 gcs configuration: Override configuration on comand line
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2725 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 21:24:55 +00:00
pip
d377b417df
Fixed export double confirmation dialogues.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2724 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 18:06:01 +00:00
pip
901b6f3882
Import/Export PipX setttings now working.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2723 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 17:29:52 +00:00
pip
f6391b1803
Added RSSI dBm value as text to the GUI.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2722 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 16:17:57 +00:00
pip
14505ed9dc
Added 230400, 460800 & 921600 #defines for windows
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2721 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 15:47:21 +00:00
pip
59a8b90653
Remove "toMSecsSinceEpoch" usage to be compatible with earlier versions of Qt
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2720 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 15:02:46 +00:00
pip
768bdbba44
Little cleanup, spelling mistake etc. Not yet got the AFC reading working.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2716 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 14:33:09 +00:00
pip
7643cd2016
Added 3 more baudrate options for windows users .. 230400, 460800 & 921600
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2715 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 13:13:29 +00:00
pip
3bad7982dd
Fixed RSSI when no signal received.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2714 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 13:12:30 +00:00
pip
54ccc4e58f
New PipX config protocol packets - YOU NEED TO UPDATE YOUR PIPX FIRMWARE to use plugin.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2710 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 07:04:46 +00:00
peabody124
0de938090b
Fix GCS problems with renaming the accels_filtered to accels. You'll have to
...
update your .ini file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2708 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:46 +00:00
pip
c854b74690
Fixed carrier frequency problems.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2699 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 17:53:30 +00:00
pip
6714ce99fa
Fixed AES encryption key problems
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2698 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 17:20:02 +00:00
pip
77501544b5
General clean up.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2697 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 14:00:33 +00:00
pip
beb1a6e5e8
GCS can now configure PipX modem using the PipX plugin.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2696 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 11:46:11 +00:00
zedamota
878829a7cf
OP37/GCS MapLib - Try different DB method to improve speed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2694 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 10:41:27 +00:00
andrew
4434df6702
OP-299 Swashplate Levelling UI
...
Framework for levelling UI no functional code yet.
Some general cleanup of ccpm code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2688 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 05:28:54 +00:00
pip
8a602c8b5e
Removed unused files.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2686 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:36:21 +00:00
pip
b378a38cb5
Fixed compile error.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2685 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:28:35 +00:00
pip
5756d17926
Re-commiting files due to commit clashes by 2 people at same time.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2684 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:22:16 +00:00
edouard
c1555d9dfe
OP-306 Update revealed two bugs in the widget destructors, workaround for now, too late for today...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2683 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:15:29 +00:00
pip
959e9101b2
moved #include from .h back into .cpp
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2682 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:08:05 +00:00
edouard
9170155f5f
OP-306 Update all Gadgets so that they destroy their widgets properly when they die.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2681 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:01:52 +00:00
pip
a568ff893d
Include PipX plugin into builds from now on.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2680 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 22:59:18 +00:00
pip
b3c1994598
PipX plugin can now semi configure pipx modem
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2679 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 22:58:04 +00:00
edouard
38fa93312c
OP-306 Tell core plugin to get rid of the gadgets upon plugin shutdown.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2678 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 22:47:10 +00:00
zedamota
8c5fe506b3
OP37/GCS MapLib - Various fixes to improve stability, created diagnostics screen available from maps context menu.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2674 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 18:18:29 +00:00
andrew
12cdec0ae7
OP-294 storage scope
...
Added column to csv file to show if data changed from previous row.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2673 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 17:43:30 +00:00
cwabbott
3f05e05721
Scope plugin: make compatible for Qt 4.6.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2670 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 14:57:39 +00:00
peabody124
1c6b51b704
UAVObjects/AttitudeSettinsg: Object for CC to tune the attitude estimation
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2666 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:26 +00:00
pip
5f83c4170e
General clean up, removed unused variables. And apparently fixed random crashes on GCS exit (maybe).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2647 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 23:26:36 +00:00
pip
6662d856fd
gadgetWidget destructor now gets called.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2646 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 23:12:21 +00:00
pip
5f07a95234
gadgetWidget's destructor now gets called OK.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2645 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 22:39:06 +00:00
edouard
0a87ed23c7
OP-306 More updates to plugins to properly destroy the Widgets when the gadgets are removed.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2644 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 21:50:11 +00:00
pip
6ef4dec59f
Added more comms code.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2643 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 21:46:42 +00:00
edouard
2dfc907a8c
OP-306 Scope plugin: destroy the widget explicitely when the gadget is removed. Should improve stability on the GCS. If so, I will generalize this on all current plugins.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2642 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 21:38:41 +00:00
zedamota
94c1f9793d
OP37/GCS MapLib - Fixes small bug on the SQL caching
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2638 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 17:22:49 +00:00
zedamota
8297f0e43e
OP37/GCS MapLib - Small change to force static lib relink on change.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2636 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 13:09:06 +00:00
pip
b13648da36
General cleaning up
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2635 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 10:16:06 +00:00
andrew
9c313ebb7a
OP-294 Add logging to scope plugin.
...
First attempt to add logging to the scope gadget.
Logs a snapshot of data from the scope configuration at the same rate as the update timer set in the options page.
This has configurability via the options page for logging path.
File name is based on the configuration name and the date/time the logging starts.
This uses synchronous file writes in the update timer.
Tested to work on Win XP and Linux (Fedora 14)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2634 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 02:09:44 +00:00
erhard
311bcdd492
OP-232 gcs configuration: First step to configure all plugins in a standard way
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2632 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 23:22:51 +00:00
pip
5ce1538c03
Disable/Enable the GCS main connect button when suspendPolling and resumePolling functions are called - to prevent the user from trying to use the telemetry ports whilst another plugin is using them.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2629 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 14:46:25 +00:00
osnwt
f1116356f5
Windows installer: Spanish translation. Now we have all GCS-supported languages in the installer too.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2628 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 14:39:16 +00:00
pip
89df836c23
PipX plugin now connects/disconnects from communications port. Have yet to write the comms stream routine/thread and packet protocol.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2627 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 13:28:22 +00:00
osnwt
1ae14c5682
GCS/Uploader plugin: display DeviceID in hex making it more sensible (201 -> device 2, revision 01).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 01:49:32 +00:00
edouard
50ba2dfa22
Small capitalization fix on PipXtreme gadget to enable cross-platform compilation.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2621 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 07:52:03 +00:00
pip
6a42a77e46
Fixed Uploader entry details (it was altering the modelview depends)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2620 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 00:01:20 +00:00
pip
b5640896ea
Corrected the PipXtreme plugin entry details
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2619 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 23:46:37 +00:00
pip
05a7da2462
fixed the .pro file (included a non-existant file)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2618 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 23:45:57 +00:00
pip
7c73f9c2c8
Corrected GUI widget spacers, added OpenGL rendering.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2617 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 22:41:34 +00:00
pip
e5e80bde27
Made openGL option default to not used, added smooth option to dials plugin
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 21:20:45 +00:00
pip
3c49944e73
Added OpenGL option to the "Dial" and "LinearDial" plugins.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2613 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 20:45:45 +00:00
sambas
ba5ebb6b13
OP-303 PIOS/Sonar: preliminary support for HCSR04 ultrasound altimeter module, tested and working :)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2610 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 19:21:22 +00:00
osnwt
3787787404
Windows installer and build scripts: few minor changes (listed below), no code change.
...
- Fixed unescaped backslashes in openpilotgcs.pro, translations.pro, glc_lib.pro (don't like warnings).
- Fixed comments in Windows installer batch file.
- Changed Windows uninstaller section names for better readability.
- Changed Windows installer executable properties (makes sense if you use SubWCRev).
- temporary disabled Windows installer Spanish language until someone helps with translation (no changes for GCS itself).
- small beautification of winx86.pro.
- some changes in the top Makefile.cmd (more changeable parameters for batch build)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2609 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 18:18:08 +00:00
edouard
b079d7e90b
French translation for installer
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2600 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 21:54:12 +00:00
osnwt
eb517e7075
Windows installer: fixed minor dependency issue with SVN info extraction.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2599 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 14:39:45 +00:00
osnwt
208c965e65
Windows installer: added Chinese and German translations.
...
Thanks to:
- zhao0079 for Chinese translation,
- Corvus Corax for German translation.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2598 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 13:19:42 +00:00
edouard
ba606c7054
OP-249 : GCS / Pause scopes during log replay if pause button is pressed. Was more difficult than planned! You will have to clean your GCS build or at least delete the scope and logging shadow build dirs in order for this to work properly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2597 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-26 22:21:54 +00:00
edouard
dce3c25771
Add missing header on some files.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2595 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-26 16:49:21 +00:00
pip
549e92f9c0
Added USB port detection
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2594 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-26 12:01:09 +00:00
osnwt
449474b66c
Windows GCS installer cleanup.
...
Moved obsolete Wix installer into Experimental branch. NSIS installer moved one level up. Now it supports new build directory structure, does not require to be copied into it and can be built using packaging/winx86/Makefile.cmd or as a qmake-generated "installer" target (using "make installer"). NOTE: this target will NOT be built automatically, you have to build it yourself.
Install system requires Unicode NSIS installer and optionally uses SubWCRev.exe utility (from TortoiseSVN package) to extract some build info from local SVN copy (like revision number, etc.). This info then is available as a properties of installer executable and also used in the installer's executable file name. SubWCRev utility is optional, if it is not found - no extra info will be generated and used.
Also fixed unescaped backslash in openpilotgcs.pri (please check that it does not break !win32 builds).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2584 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 19:27:49 +00:00
cwabbott
8cddf2913d
Only change COPY_DIR to cp -r -f if QMAKE_SH is defined, consistent with win32-g++ mkspec.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2550 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:59:25 +00:00
pip
fadcbbbe6c
Cleaned up qDebug() output when manually moving the home icon on the map.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2547 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:24:24 +00:00
pip
0bdea195c1
Fixed the HomeLocation setting to update ALL the HomeLocation UAVObject values when the user manually moves the home icon on the map.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2543 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:05:45 +00:00
pip
0a2a59baa4
Changed the main function parameter format.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2542 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:03:59 +00:00
pip
0579de11e3
Can now manually move the HomeLocation icon on the map, it updates the uavobject with lat, lon & new Be values.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2541 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 13:00:53 +00:00
stac
a0cbe21eb3
build: move openpilotgcs output under <top>/build/ground
...
This will allow us to create a simpler project file
for those that use the qt-creator gui.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2529 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-22 17:41:48 +00:00
stac
7195862d77
build: Move openpilotgcs into its own subdirectory
...
This will allow us to build a parent project for
qt-creator that sits above both openpilotgcs and
uavobjgenerator so that we can build both projects
at the same time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2528 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-22 17:40:26 +00:00