1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

11 Commits

Author SHA1 Message Date
James Cotton
99b3a629a8 OP-493: Force three AccessoryDesired objects to always exist. Routing to
Mixing channel now works.  However Accessory desired instances do not show up
in GCS.
2011-06-05 15:38:58 -05:00
Stacey Sheldon
965867de7a gdb: add config file for coptercontrol bootloader 2011-05-08 12:40:29 -04:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
2011-04-24 10:19:00 -05:00
peabody124
87881734b0 Add GDB debugging scripts for CC and PipX
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2650 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:58 +00:00
dschin
84d054c4ed gdb command file to enable debugging with interrupts in Eclipse
See http://forums.openpilot.org/topic/1671-debugging-with-interrupts-in-eclipse/
for details.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1511 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-03 13:10:04 +00:00
stac
d7856b3d0a gdb: Do not automatically reset target in gdb init file
The gdb init files would previously reset the target immediately
when gdb started up.  This is sometimes an unpleasant side-effect
of running gdb.

In order to connect to the target, use the new "connect" function.
To reset the target use "mon reset".

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1236 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:52 +00:00
stac
90f9e6d309 openocd: support OP and AHRS at the same time
Split the floss-jtag.cfg file into separate versions
for OP and AHRS.

Push AHRS onto non-default ports for gdb, tcl and
telnet.

Update the AHRS gdb setup script to point at the new
gdb port.

Add (commented out) example sytax to support distinguishing
between multiple floss-jtag boards that don't have serial
numbers.  Uses the usb bus address of each device as the
selector.  See this patch posted to the openocd mailing list
for how to add this functionality to openocd:
  http://lists.berlios.de/pipermail/openocd-development/2010-June/015785.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:30 +00:00
stac
a03b948fb5 gdb: add gdb init + hooks for AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@708 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-03 13:58:16 +00:00
stac
f6de7ff54f gdb: Add pre/post hooks to fix stepi
This fixes the gdb stepi command to allow the M3 core to make
forward progress even when interrupts are pending.  M3 Core interrupts
are masked/unmasked in pre and post command hooks.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@636 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-18 04:50:36 +00:00
stac
0e3a5550ba gdb: Add pre/post hooks to fix step, next, finish
The gdb commands step, next and finish on the M3 core would
never make forward progress since there is almost always an
interrupt pending.  This is a known problem on the M3, and is
fixed by adding pre and post command hooks which mask and unmask
all ISRs on the M3 core.

Step, next and finish now work as expected, but care should be
taken when using these commands across any part of the code that
actually _needs_ the interrupts in order to make forward progress.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@622 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-14 04:32:17 +00:00
stac
0826af11e5 Add startup script for gdb for openpilot board
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@597 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-07 01:44:57 +00:00