Oleg Semyonov
aad263bdd8
TxPID: enable ramp-shaped throttle-dependent PIDs
...
Besides of knob PID tuning it is now possible to use throttle channel
to ramp-shape PID coefficients. This can be used to lower some PIDs on
VTOL while sinking to prevent wobble.
To use the feature select throttle as control input, choose throttle
range max and min values, assign the instance to particular PID
coefficient and define a range for it. When throttle is lower than
defined throttle range min value (or higher than max), then min and max
PID values will be used accordingly. Changing throttle from throttle
min to max will linearly scale PID value.
Note that it is possible to set MinPID > MaxPID. In that case increasing
control input value will decrease the PID coefficient.
Up to 3 independent instances can be configured. The number can be
increased changing the UAVO definition, but at the cost of extra RAM.
2011-09-18 14:38:50 +03:00
Oleg Semyonov
d923117c25
TxPID: optional module to tune PID settings using R/C transmitter
...
This module will periodically update values of stabilization PID settings
depending on configured input control channels. New values of stabilization
settings are not saved to flash, but updated in RAM. It is expected that the
module will be enabled only for tuning. When desired values are found, they
can be read via GCS and saved permanently. Then this module should be
disabled again.
2011-09-17 22:49:51 +03:00
Oleg Semyonov
abe5136de0
uavobjgenerator: enable '+' character in object field names
...
Useful for names like "Pitch+Roll" or similar. Will be removed
from symbolic indentifiers.
2011-09-17 22:48:41 +03:00
James Cotton
acf2aa218b
Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next
2011-09-14 11:49:01 -05:00
James Cotton
b3329a0547
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2011-09-13 10:35:24 -05:00
Oleg Semyonov
c92870d29e
Remove unused file (versionblob.py)
2011-09-13 16:10:10 +03:00
James Cotton
06fc5a1110
Input Configuration: Fix flight mode slider detection (looking at wrong channel
...
number).
2011-09-12 22:28:28 -05:00
James Cotton
c36297227d
Stabilization fix typo
2011-09-12 11:56:01 -05:00
James Cotton
84f38eab78
HISTORY update
2011-09-12 11:52:59 -05:00
James Cotton
63bb80649b
Merge branch 'max_rate_for_attitude' into next
2011-09-12 11:51:03 -05:00
James Cotton
b32f6d9383
History.txt update
2011-09-12 11:50:11 -05:00
James Cotton
6bd52832be
Heli configuration: Now the collective passthrough uses the collective channel
...
only. Please note this requires all heli users to scrub their settings and
start over. Please erase your setting and be careful. Remove all blades.
2011-09-12 11:47:59 -05:00
James Cotton
d5a4104df8
Merge branch 'master' into next
...
Conflicts:
MILESTONES.txt
2011-09-11 18:55:22 -05:00
James Cotton
8f2fad6918
Fix for merging with the collective channel with the swashplate fix.
2011-09-11 18:53:10 -05:00
James Cotton
6457276438
Merge branch 'input_configuration' into next
2011-09-11 18:52:35 -05:00
Oleg Semyonov
f5369f9338
Input Configuration: support all 18 S.Bus input channels
2011-09-12 02:06:50 +03:00
Oleg Semyonov
7b3056d10f
Input Configuration: fix S.Bus receiver in multi-receiver code
2011-09-12 02:06:48 +03:00
dankers
bcf200bc4f
Add CC M&P for Daniel
2011-09-12 09:06:30 +10:00
James Cotton
ae74706b20
Update URL to ARM SDK
2011-09-11 17:19:31 -05:00
James Cotton
b38081bb1b
Stabilization: When in none mode zero the integral accumulators for rate and
...
attitude loops. When not using outer loop zero that accumulator.
2011-09-11 16:33:38 -05:00
Mike Smith
deade53c5d
OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices
2011-09-11 10:49:09 -07:00
James Cotton
6945f17eba
Make the StabilizationSettings.MaxRate field only apply to the stabilized
...
modes. That way ManualRate can exceed MaxRate.
2011-09-11 12:27:17 -05:00
James Cotton
5d43a8dd36
Input configuration; Remove some old unused variables
2011-09-11 12:24:48 -05:00
James Cotton
3ff7bf7ed0
Input Configuration: Make sure the input channel form always is properly
...
aligned. I hope the fixed size behaves well across platforms.
2011-09-11 12:11:15 -05:00
James Cotton
ce1c56260d
Input Configuration: Refacfor the code a lot to clear up handling the state and
...
transitions to make back and cancel a bit more reliable.
2011-09-11 12:11:02 -05:00
James Cotton
aad41ebb4f
Merge branch 'mainboard_receiver_fix' into next
2011-09-10 16:01:22 -05:00
James Cotton
01cd2ded57
Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
...
setting that is mutually exclusive.
2011-09-10 14:20:51 -05:00
James Cotton
4847a04db8
Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
...
TIM5-8. Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update. I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 14:20:40 -05:00
James Cotton
eb191d869a
Mainboard: Get spektrum working again.
2011-09-10 14:19:54 -05:00
James Cotton
199db1362d
Actuator: Found a bug in actuator that affects how throttle and pitch curves
...
were used. Basically 80% was always 100%. This should make hovering better
and fix heli swash pitch.
2011-09-09 19:40:58 -05:00
James Cotton
dfe91af686
UAVObjects: Space allocated in manualcontrolcommand did not match the number of
...
channels in settings. Fixed this and added assertion to catch in future.
2011-09-09 01:17:13 -05:00
James Cotton
a5509965b2
Input configuration: add reverse checkbox and label for current neutral value
2011-09-09 00:54:47 -05:00
James Cotton
1a2750051a
Input wizard: Make collective pitch come first for helicopter mode transmitters
...
and tell person to use throttle hold so it's detected correctly.
2011-09-08 10:24:52 -05:00
James Cotton
bbdb176409
Input configuration: Make input channel into a dropdown box and make the
...
neutral position into a slider. During calibration the slider moves and the
min and max values are updated appropriately. Also make the collective channel
skippable in the configuration wizard.
2011-09-07 02:13:27 -05:00
James Cotton
1a5fd9f30e
Heli: Added an explicit collective channel. Also make the default channel
...
number 0 since that is not invalid.
2011-09-07 01:48:39 -05:00
James Cotton
cabfbc229d
Input config: Bring back old style calibration. I can't seem to make the input
...
widget list a class variable which isn't very safe (multipe instances of the
config gadget will act funny).
2011-09-06 22:19:12 -05:00
dankers
e5ca84ef44
Update font
2011-09-07 11:22:30 +10:00
James Cotton
d496f81c68
GCS Input config: Change the layout a bit to make the spacing between rows
...
regular, and move some of the layout to the .ui file.
2011-09-06 17:50:55 -05:00
James Cotton
8c91522e54
UAVO: Reorder field names of ManualControlSettings which affects the order of
...
channels listed in the UI configuration. This keeps it consistent with the
previous releases.
2011-09-06 16:42:03 -05:00
James Cotton
72625d9971
PiOS RCVR: Make the public API use a 1 based indexing for channel numbers.
...
This may or may not get into next, but if so anyone following it MUST
reconfigure their inputs.
2011-09-06 16:39:08 -05:00
James Cotton
8f7712435f
Merge branch 'safer_failsafe' into next
2011-09-06 16:23:11 -05:00
Oleg Semyonov
a4dfe9ac4e
packaging: do not build not yet supported targets for package (save time)
2011-09-06 15:46:21 +03:00
Sambas
a8ef57c6d6
Redo DX8 changes
2011-09-06 08:40:10 +03:00
James Cotton
acfb28b04b
Heli configuration: Make swashplate leveling routine using static accessor
...
methods. Also got rid of incredibly annoying message when you tried to alt-tab
out of GCS.
2011-09-04 23:08:35 -05:00
James Cotton
a81f14a575
CCPM config: Fix the collective pass through mode for multi receiver support.
...
Now the user must configure Accessory# in the input configuration section
though.
2011-09-04 23:08:34 -05:00
James Cotton
6344bc8f83
Fix encoding no configccpmwidget.cpp
2011-09-04 23:08:34 -05:00
Stacey Sheldon
1e9bcf8426
openpilot: fix merge of unidirectional gps feature branch
2011-09-04 23:22:29 -04:00
James Cotton
fa33c66f23
OP-553 StabilizationSettings: Change default max roll/pitch to 55 degrees from
...
35 degrees. I hope this doesn't make it too sensitive for any of the
beginngers.
2011-09-04 13:34:49 -05:00
James Cotton
b1e0366525
Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next
...
Conflicts:
flight/OpenPilot/System/pios_board.c
2011-09-04 13:33:52 -05:00
James Cotton
82c5f9f0f4
PIOS_RCVR: Document return values better and use enum for them
2011-09-04 12:37:39 -05:00
