rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-01 09:24:10 +01:00
Code Issues Releases Activity
4,391 Commits 5 Branches 8 Tags 266 MiB
deea7cde41
Commit Graph

4391 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Corvus Corax
5ea35bb28c Make Diagnostic UAVObjects optional in OP and Sim_Posix (but enabled by default) 2011-08-20 13:06:58 +02:00
Corvus Corax
7395a369a9 Optional Modules: Ported optional module concept to OpenPilot and Sim_Posix 2011-08-20 13:02:44 +02:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules) 2011-08-20 01:24:06 +02:00
James Cotton
952b4e1809 Have to speed up the comms rate for gyro to handle the oversampling we are 
using.
 2011-08-19 14:35:13 -05:00
James Cotton
cefc2b8c2e Clean up main INS function a bit. 2011-08-19 14:34:56 -05:00
Corvus Corax
b75890fcd4 Merge branch 'next' into CC_GPS 2011-08-19 21:34:38 +02:00
James Cotton
d103541970 IMU3000: Make the IRQ trigger the callback based I2C read. Drop the 
temperatured data from the FIFO stream.  Add some flags to stop the callbacks
trampling over the configuration.
 2011-08-19 14:28:33 -05:00
James Cotton
3465eb2f30 PiOS F2 I2C: Add a callback based transfer. This needs merging into the main 
transfer function like SPI but I will leave that for now to avoid creating a
lot of changes in the main code.
 2011-08-19 13:38:11 -05:00
Corvus Corax
85aef9c7b4 OpenPilot: bugfix: Add GPS tx buffer by default (needed until GPS has been refactored to not send or only send when configured so) 2011-08-19 20:22:05 +02:00
Corvus Corax
2062ec0aeb AHRS_COM: Initialize transpherred objects before using them 2011-08-19 19:52:27 +02:00
Corvus Corax
5e4941f7cb PiOS.posix: make PiOS.posix bail in case of a Panic with an error message 2011-08-19 18:41:59 +02:00
James Cotton
7444337418 F2 PiOS I2C: Add a poor man semaphore here in case we start calling I2C 
transfers from IRQ.  Also catch the double 0x70084 event which was locking up
the FSM with -Os enabled.  I did this in a cheating way (filtering the event
based on state) but it's the cleanest I can see.  Hopefully a DMA version of
I2C will fix this.
 2011-08-19 11:39:50 -05:00
Corvus Corax
9bba1f7ae9 Posix: fix object initialization where necessary 2011-08-19 18:36:30 +02:00
James Cotton
b0e04e5f79 PIOS SPI: Make sure the non-freertos busy flag inits to zero 2011-08-19 10:52:50 -05:00
James Cotton
03a8bd7674 Statically initialize object handles to null to make sure the uavobjectmanager 
can catch it and return -1.  Do NOT panic when they are null as this is
something that should be caugth at run time in some cases.

Ideally as a compromise in a task start it could have a set of
PIOS_Assert(ObjectNameHandle()) to make sure the minimal set of objects it
needs are there.
 2011-08-19 10:12:39 -05:00
James Cotton
ab7e57ad2b Initialize objects for guidance in the correct place. Init some objects in 
pios_board_posix since AHRSComms not around.
 2011-08-19 09:52:05 -05:00
James Cotton
ced29e221e Revert "Debugging: Add PIOS_DEBUG_Panic() call wen an UAVObject handle is requested but object is uninitialized, make PiOS.posix bail in case of a Panic with an error message" 
We do not want to panic in this case as we want the ability to detect if
objects exist at run time

This reverts commit 78e42470d4.
 2011-08-19 09:45:10 -05:00
James Cotton
482bec497b Revert "Fixed modules that didn't initialize used UAVObjects correctly" 
Modules should initialize their settings and the objects they source.  Not just
everything.

This reverts commit 9ad85e9b7b.
 2011-08-19 09:44:38 -05:00
Corvus Corax
69f10cd6d0 PiOS.posix: bugfix in COM_UDP 2011-08-19 13:54:16 +02:00
Corvus Corax
adfb6eccc2 fixed usage of GPS buffer in sim_posix 2011-08-19 13:20:40 +02:00
Corvus Corax
9ad85e9b7b Fixed modules that didn't initialize used UAVObjects correctly 2011-08-19 13:20:15 +02:00
Corvus Corax
78e42470d4 Debugging: Add PIOS_DEBUG_Panic() call wen an UAVObject handle is requested but object is uninitialized, make PiOS.posix bail in case of a Panic with an error message 2011-08-19 12:56:26 +02:00
Corvus Corax
01a844e0da Fixed redefinition of configCHECK_FOR_STACK_OVERFLOW in OpenPilot/System/inc/FreeRTOSConfig.h 2011-08-19 12:11:05 +02:00
Corvus Corax
f86e53bf91 Merge branch 'OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk' into next 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-19 12:10:40 +02:00
James Cotton
0448b34a91 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2011-08-19 01:51:08 -05:00
James Cotton
f85ae84ec3 Merge branch 'camera_stabilization' into next 
Conflicts:
	flight/OpenPilot/System/pios_board_posix.c
 2011-08-19 01:48:24 -05:00
James Cotton
25b54a4323 Change to default settings at request of Dave. AccelKp = 0.05. MaxAxisLock = 
15 degrees.
 2011-08-19 01:46:52 -05:00
James Cotton
c7034ef8a6 IMU3000: Fix a constant that made the sampling rate 1kh instead of 8 internaly. 
No downsample that (in IMU3000) by 8 to get gyros at 1khz.  Well about 256 Hz
nyquist and shouldn't cause substantial issues for EKF.
 2011-08-18 13:01:51 -05:00
James Cotton
bdb9dc0a54 BMA180: Use DMA for getting the accels and use callback to push it onto the 
stack.
 2011-08-18 12:51:22 -05:00
James Cotton
3b6ffc8afa PiSO SPI: Implement a poor mans semaphore for non-freertos systems. 2011-08-18 12:51:00 -05:00
James Cotton
294e0cbdff IMU3000: Change IMU3000 api right now so it only reads one element from the 
fifo but swaps the endian appropriately.
 2011-08-18 11:03:56 -05:00
Corvus Corax
34df188963 Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk 2011-08-18 17:17:06 +02:00
Oleg Semyonov
7791db9820 Milestones: add alconaft43's milestones (same video, two pilots) 2011-08-17 17:58:39 +03:00
Oleg Semyonov
b8d47381d2 Milestones: add Maximus43's flybared heli inverted flight, funnel, loop 
As always, there is the rule: no video - no milestone :-)
 2011-08-17 17:47:17 +03:00
James Cotton
11ac0707da BMA180: Reset BMA180 chip at reconfiguration. 2011-08-17 06:49:56 -05:00
zedamota
0a0d405fc1 Finished the new input configuration wizard. Fixed some bugs along the way. 
Sending it for review now.
 2011-08-17 12:43:08 +01:00
James Cotton
29026db5d5 Refactor the INS code out a bit but still a mess. 2011-08-17 06:15:14 -05:00
Corvus Corax
6fe495c088 Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
 2011-08-17 08:30:32 +02:00
Oleg Semyonov
2020e336d6 OP-290: allow GCS tabs to shrink (by eliding the text), less limit min window width 2011-08-16 20:58:39 +03:00
James Cotton
c0ead372e1 INS: Change LED flashing to indicate connected. 2011-08-16 11:30:38 -05:00
James Cotton
71a1cdff62 PiOS SPI: For F2 need to have the same receive and transmit length when using 
CRC.  This wasn't the case on F1.  With CRC the last byte of the buffer passed
to PIOS_SPI_TransferBlock is NOT USED.  This is the case on both F1 and F2.

Also need to DeInit DMA before enabling or it doesn't enable successfully.

Finally added a timeout which sets a fail on the pios spi transfer in the case
that either of the dma channels fails to enable.
 2011-08-16 11:29:15 -05:00
zedamota
6a103ed332 Integrated artwork into the input config wizard. Some testing left to do before sending for review. 2011-08-16 16:06:18 +01:00
James Cotton
bcca705750 Disable beta hardware bmp085 driver until it's updated. Not necessary anyway 
since on the INS.
 2011-08-16 08:55:02 -05:00
James Cotton
33e61b4405 OP-557: Make the tools erase menu item attempt to perform a full format on the 
flash chip first, then fall back to erasing settings via the EraseSettings
object persistence.  The later only removes UAVO instances that the firmware is
current aware of, so can create issues when jumping between versions.
 2011-08-15 11:37:00 -05:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not 
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
 2011-08-15 10:33:27 -05:00
zedamota
98f84e472b Trying to get out of merge hell 2011-08-15 14:12:54 +01:00
James Cotton
db9c73db45 Get SPI closer to working. The flags in the pios_config should match the 
stream number, not channel number.  Also DeInit DMA section in the init process
which makes debugging and init behavior more reliable.
 2011-08-15 04:47:53 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00