1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

60 Commits

Author SHA1 Message Date
pip
62e510a696 Set unused/unconnected pins as outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2875 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-24 17:31:24 +00:00
pip
578b779a76 Fixed PPM compile errors - you can now compile for PPM input if desired.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 13:41:19 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
peabody124
a3ba9c3781 CC-21 Make it possible to enable Spektrum on CC, although it eats up S6 in
order to free a timer.  Mode PIOS_DELAY (not working cleanly) to TIM3 because
Spektrum resets TIM2 count.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:45 +00:00
peabody124
03fb82ad0a CC Attitude: Change when AttitudeRaw is set to end of attitude estimation,
because this is what is determines when the Stabilization code executes.
Because we aren't oversampling gyros relative to the PID in CC we should set
the attitude first (computational time to do so is negligible).

Also change update rate to 500 Hz.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2750 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:18 +00:00
pip
6559615ef8 Made quite a few constants/#defines capitals (previously lower case)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 10:55:08 +00:00
peabody124
56d4d54a97 CC: Increase the memory for the modules after removing PriTxTask from CC and
also increase the telem queue to decrease event errors (can be reverted later if
we need the memory back)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2730 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 10:52:59 +00:00
peabody124
f97d853c80 Make the PriTx queue optional which saves 700 bytes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2729 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 10:52:52 +00:00
peabody124
cf2e9fb349 Memory: Also allow overriding Stabilization stack size
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2690 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 08:57:34 +00:00
peabody124
b1e4b65f3d CC-1 Bigger oversampling window for CC sensor data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2667 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:31 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:04 +00:00
peabody124
1d2ad6e9cb Telemetry: Move the telem stack size to the board definition file since CC
needs less

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:59 +00:00
peabody124
063c58e7c0 CC-12 Enable Watchdog on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2653 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:32 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 22:33:13 +00:00
peabody124
99eb1a89f9 CC-5 PIOS/Servo: CC default servo position was 2000 from testing. HUGE SAFETY
ERROR

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2593 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-26 01:25:29 +00:00
peabody124
c759253b77 CC-6 Flash chip working to read ID. Also tweaked how the semaphore for the SPI
bus is used to be a bit safer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-25 17:46:27 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:14 +00:00
peabody124
21e3441f00 CC-3 Set gyro to downsample 10x to 250 Hz
Conflicts:

	flight/CopterControl/System/inc/FreeRTOSConfig.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2575 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:05 +00:00
peabody124
23599ee59f CC: Set the buffer size of USART smaller and register teh AHRSSettings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2573 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:59 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure.
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:45 +00:00
peabody124
99f2f3c68b OP-291 CC Servo configuration: Gets S5 and S6 working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2566 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:38 +00:00
peabody124
108ea8c959 OP-295 Get CC pin mappings consistent for using the temperature sensor
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2565 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:34 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 03:40:21 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 23:00:48 +00:00
edouard
b3ca037308 OP-277 Update all files to use a BOARD_TYPE and BOARD_REVISION scheme through the whole codebase.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2458 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 20:41:55 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 16:02:53 +00:00
peabody124
ab75e8117f OP-265 CC: Getting GPIO lines working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2443 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:34 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:22 +00:00
zedamota
ad0b3e911d OP-268/PipX Bootloader - Changed Timers for MD device, auto memory space fetching (as per people request ;)). Stripped unused functions to reduce size.
TESTED WORKS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2431 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 15:33:24 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 02:15:19 +00:00
peabody124
94ff276522 OP-265 CC: Tweaking objects included and the memory requirements
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2426 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:49 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:47 +00:00
peabody124
ea851803af OP-266 CopterControl: Continue trying to strip out as much as possible to get
it to fit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2422 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:39 +00:00
peabody124
f0c36b13a4 PiOS/USART: Use the buffer size defined in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2421 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:37 +00:00
peabody124
7c9b3b3d69 OP-265 AHRS: New file locations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2420 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:34 +00:00
peabody124
940792db5c OP-265 CopterControl: Fork main OpenPilot directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2416 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:24 +00:00
peabody124
fc54159369 OP-265 Flight reorganization of UAVObjects and Modules up a directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2415 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:19 +00:00
pip
c7ecfd2f60 Fixed pios_board.h to include the pipx .h file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2407 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:37:01 +00:00
pip
b647d93add Added pipx board file.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2406 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:34:59 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def.
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 17:34:22 +00:00
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 00:16:30 +00:00
peabody124
5734e1f437 OP-176 PIOS/ADC: Decrease the priority of the ADC DMA/IRQ
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2360 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:43 +00:00
peabody124
148ea6fdc1 Flight: Make PWM outputs default to 0 us to avoid either pushing servos to
exteremes or running up motors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2358 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:35 +00:00
peabody124
0f07d7f671 OP-240 OP-176 Flight: Setting the priority group back to 4 (anything higher
priority preempts) and adjusting the priorities around to be more sensible.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:26 +00:00
pip
cb8e9ef07b Added a moving-average-filter to the pressure reading, and increased BMP085 oversampling from 2 to 3
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2336 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 11:26:47 +00:00
sambas
0b2a0884ae OP-22 Flight/PiOS: Spektrum improvements, removed my zero throttle glitch
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 18:37:36 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-21 17:25:24 +00:00