Vladimir Zidar
e12967e45a
Merge remote-tracking branch 'upstream/next' into LP-291_port_UAVOMSPBridge_from_dRonin
2016-05-15 22:16:47 +02:00
Lalanne Laurent
c6cf612bf4
Merged in corvusvcorax/librepilot/LP-295_OP-1900_fixedwingautotakeoff_rebasenext (pull request #234 )
...
LP-295 fixedwingautotakeoff
2016-05-15 18:42:53 +02:00
Alessio Morale
4cbd4ea926
Merged in f5soh/librepilot/LP-233_OneShot42 (pull request #236 )
...
LP-233 Support OneShot42
2016-05-09 10:53:12 +02:00
Laurent Lalanne
214ae849a2
LP-233 Add MultiShot 5 - 25µs pulses
2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79
LP-233 Support OneShot42
2016-05-02 20:24:03 +02:00
Laurent Lalanne
c9fff7e16e
LP-151 OPLink: Allow custom Device ID or auto generated.
2016-05-01 21:56:50 +02:00
Corvus Corax
37d9675924
LP-295 fixed uavobject definitions as per pull request comment
2016-04-25 18:05:15 +02:00
Vladimir Zidar
22cf21c335
LP-291 fix minor whitespace issue
2016-04-25 12:57:27 +02:00
Corvus Corax
5285689541
Merge branch 'next' into corvuscorax/OP-1900_fixedwingautotakeoff_rebaserc6
2016-04-23 02:08:13 +02:00
Vladimir Zidar
f04d44de30
LP-291 Added MSP support to all boards (revolution, revonano, revoproto, discoveryf4bare and coptercontrol)
2016-04-22 03:30:38 +02:00
Vladimir Zidar
d8bdd8bfcf
LP-291 Added TaskInfo entry for UAVOMSPBridge task
2016-04-22 03:26:50 +02:00
Vladimir Zidar
6b5e43a57d
LP-291 Changed default baudrate to 115200
2016-04-22 03:26:47 +02:00
Vladimir Zidar
1e32ccb1d0
LP-291 Initial port
2016-04-22 03:26:41 +02:00
Lalanne Laurent
e6ada50587
Merged in alessiomorale/librepilot/amorale/LP-276_measurement_based_d_term (pull request #218 )
...
[LP-276] Support D Term calculation on measurement only
2016-04-14 11:44:39 +02:00
Alessio Morale
8c860591ff
[LP-276] change default
2016-04-08 23:10:48 +02:00
Philippe Renon
bde5648f51
Merged in mindnever/librepilot/LP-268-OPLink_add-tx-and-rx-packet-rates (pull request #210 )
...
Lp 268 oplink_add tx and rx packet rates
2016-04-04 21:28:25 +02:00
Philippe Renon
9cfa3bd44a
Merged in f5soh/librepilot/LP-154_CruiseControl_default_100 (pull request #208 )
...
LP-254 Set CruiseControlMaxThrust default to 100
2016-04-04 21:26:23 +02:00
Alessio Morale
a513b2c675
[LP-276] Support D Term calculation on measurement only
2016-04-03 21:49:44 +02:00
Vladimir Zidar
35b673f9b4
LP-268 Changed pps unit to packet/s
2016-03-28 16:03:21 +02:00
Vladimir Zidar
4159449021
LP-268 This adds TX and RX data rates to OPLinkStatus UAVO and fixes small issue in rfm22b driver with rx_seq not being updated.
2016-03-28 16:02:28 +02:00
Laurent Lalanne
76477e46a3
LP-254 Set CruiseControlMaxThrust default to 100
2016-03-25 22:00:46 +01:00
Laurent Lalanne
e0c56db4e5
LP-267 Disable limits for Fusion Algorithm (GUI)
2016-03-25 17:48:51 +01:00
Laurent Lalanne
f2f189ef18
LP-206 Keep UAVO order for Armed and FlightMode (OSD compatibility)
2016-03-23 00:11:44 +01:00
Laurent Lalanne
406c381071
LP-206 Add Always stabilized accessory switch - Fix: Allow Accessory3 for arming
2016-03-07 18:26:10 +01:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Cliff Geerdes
2ae1f9c63d
LP-212 DJI GPSMag support
2016-02-16 15:23:36 -05:00
Fredrik Arvidsson
e17d809120
Merge branch 'next' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support
2016-01-24 21:11:35 +01:00
Laurent Lalanne
f20adf00f5
LP-214 Add Fpv Camera tilt compensation
2016-01-24 16:35:32 +01:00
Fredrik Arvidsson
d32cc0e7fb
Merge branch 'thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support
2016-01-09 19:18:48 +01:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
c48c46b8ef
LP-196 Cleaned up some configuration. Ex.Bus only available on Flexiport.
2016-01-09 16:07:13 +01:00
Fredrik Arvidsson
6a3a822c87
LP-104 Cleaned up configuration. Only Allow HoTT on flexi port.
2016-01-09 15:50:52 +01:00
Fredrik Arvidsson
bc80c66c2b
LP-196 Removed some leftover code and definitions.
2016-01-07 14:22:52 +01:00
Fredrik Arvidsson
359266ab7a
LP-104 Removed support for HoTT on Main port on coptercontrol target since it does not work.
2016-01-07 13:01:46 +01:00
Fredrik Arvidsson
08237a1ff5
LP-196 Removed EX.Bus on Main port for CopterControl target since it is not working.
2016-01-06 17:17:02 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
68ff383637
LP-104 Adding HoTT support for Revolution and Revo Nano.
2015-12-20 23:45:37 +01:00
Fredrik Arvidsson
7a95050381
LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
...
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Alessio Morale
2522f4bd93
Merged in f5soh/librepilot/laurent/LP-160_Set_default_AccelTau (pull request #97 )
...
LP-160 Set default value for AccelTau
2015-12-13 19:12:07 +01:00
Philippe Renon
7ad68f7d1b
LP-183 sanitize uavobject definition files
...
changed FALSE/TRUE enums to False/True
other minor enum cleanups
2015-12-02 08:52:37 +01:00
Laurent Lalanne
eba2d98f9a
LP-160 Set default value for AccelTau - Remove unused const
2015-11-05 17:58:21 +01:00
Cliff Geerdes
911400924e
LP-73 convert BoardRotation to int
2015-10-24 12:18:09 -04:00
Cliff Geerdes
7de55812dd
LP-73 changes for pull request comments
2015-10-24 12:09:22 -04:00
Cliff Geerdes
b086d1a021
LP-73 ExtMag fix some more watchdog issues
2015-10-24 12:09:20 -04:00
Cliff Geerdes
d4b0d106f8
LP-73 External Mags on I2C initial coding
2015-10-24 12:09:19 -04:00
Stefan Karlsson
51f0b74e5c
LP-129 Remove broken motor scaling modes
2015-09-24 23:02:09 +02:00
Stefan Karlsson
2ab6390cf5
LP-128 Fix scaleMotor attitude problems
...
The ElevateAndCompress scaling mode doesn't scale linearly as intended
and causes motors to reach the max limit prematurely.
A new mode, MoveAndCompress, has been implemented to get better linear
scaling of the motor output values.
2015-09-22 21:25:56 +02:00
a*morale
68ecefa0fd
LP-124 - Rename Pitch/RollRatePid to EasyTuneRatePitch/Roll, UAVO and firmware fixes
2015-09-19 15:03:17 +02:00
Laurent Lalanne
8885180fde
LP-114 Add Accessory3 as input - TxWizard and Multirotor Accessory
...
mapping
2015-09-11 00:04:31 +02:00
Alessio Morale
bc89c79b7d
Merged in skarlsso/librepilot/skarlsso/LP-107_scaleMotor_bug (pull request #46 )
...
skarlsso/lp 107_scalemotor_bug
2015-09-08 15:27:51 +02:00
Alessio Morale
3eaf1ef3c3
LP-96 - Implement CPU idle counters and calibration functions
2015-09-03 20:05:25 +02:00
Laurent Lalanne
69125e8e9d
LP-44 Save RAM : Use float UAVO type only when needed. 184bytes saved
2015-09-03 07:26:06 +02:00
Stefan Karlsson
f7b8a57e42
LP-107 Replace the scaling function in scaleMotors
...
The previous scaling function used in scaleMotor could end up with
output values below the neutral point.
This patch adds a new scaling mode that will try to scale the output
proportionally while still keep all outputs within neutral and max.
The user can select three different modes:
1) NoScaling - Only cap the output values between neutral and max.
2) AddAndSubtract - The previous output scaling method, which moves the
output values directly proportionally to the amount the max/min motor
is out of the limits.
3) ElevateAndCompress - The new mode, which elevates all motor values by
the percentage needed to bring the min motor to neutral, and then
compress all motor values by the percentage needed to bring the max
motor down to max.
The motor scaling mode can be selected by setting the
FlightModeSettings.MotorScalingMode UAVO field.
2015-08-31 21:29:48 +02:00
Alessio Morale
538a137bf6
Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33 )
...
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Laurent Lalanne
670dbfe9ce
LP-92 Remove Feed Forward : flight / ground
2015-08-14 10:54:12 +02:00
Alessio Morale
74c69e033c
LP-67 - Fix checkbox yaw recalc checkbox, allow yaw recalc flag changes to trigger a yaw recalc
2015-08-14 10:24:19 +02:00
Alessio Morale
ee461ff303
LP-67 handle full PIDs terms with a single knob for each axis (roll/pitch).
...
The new setting will work this way:
- Input (knob) value is used straight as roll or pitch P term;
- P term is mutliplied by two configurable factors and used as D and I terms;
- (Optionally) Yaw P term is calculated from a mean of roll and pitch P terms multiplied by a configurable factor.
- yaw P term is multiplied by other two configurable factors and used as yaw D and I terms.
2015-08-14 10:24:18 +02:00
alessio morale
3cf8f10126
Merged in thread/LP-69_SRXL_CC_Support (pull request #13 )
...
LP-69 Added SRXL support to CopterControl targets.
2015-07-31 14:40:24 +02:00
alessio morale
05494eebcc
Merged in f5soh/librepilot/laurent/LP-66_FixedWing_Roll_differential (pull request #9 )
...
LP-66 - Add differential Roll mixing to Fixed Wing frames
2015-07-31 14:38:28 +02:00
Alessio Morale
13f02e7d9d
LP-56 - Better txpid option namings, fix tabs-spaces, tooltips. headers, variable namings
2015-07-30 18:23:55 +02:00
m_thread
9ba63ea124
LP-69 Added SRXL support to CopterControl targets.
2015-07-30 15:30:59 +02:00
Laurent Lalanne
31c30d752f
LP-66 Fixed wing : Roll differential mixing on flight side
2015-07-29 06:36:22 +02:00
Alessio Morale
7b3aed3de9
LP-56 - Allows a single txpid instance to handle Roll&Pitch
...
Also populate combos with current txpid values
2015-07-27 22:45:33 +02:00
Alessio Morale
7973ab9d0a
LP-56 - Use separate roll/picth factors and add firmware support
2015-07-25 00:29:41 +02:00
a*morale
62a585c188
LP-5 - Include missing UAVOs, add removed cc fields into hwsettings
2015-07-15 00:07:50 +02:00
Corvus Corax
96f58605ec
Merge branch 'rel-nano-15.05' into corvuscorax/fixedwingautotakeofftest
2015-06-05 15:17:35 +02:00
m_thread
9ce00a18f0
REVONANO: Added limit for ComBridge on Nano receiver port.
...
Fixed Revo Hw config page to handle ComBridge on Receiver port
correctly.
Changed some alignments in GUI.
2015-06-04 22:18:16 +02:00
Corvus Corax
ffe9dde8d0
OP-1900 changed default landing pitch from 15 ° pitch up to 7.5° - 15 is too high and leads to stall on some frames
2015-06-04 13:21:13 +02:00
Corvus Corax
23f9f4d9c9
OP-1900 add failsafe to FW pathfollower to fly safely without valid airspeed estimate
2015-06-04 12:51:47 +02:00
Corvus Corax
c10717d3a2
OP-1900 get rid of highpower error by default again (too many false positives)
2015-06-04 12:51:47 +02:00
Corvus Corax
ccfe39633e
OP-1900 Put Sequencing state machine for vixed wing autotakeoff out of plan.c and into vtolautotakeoffcontroller, removed all special casing for autotakeoff and land from outside of pathfollower itself and code in plans.c - especially cleaned up pathplanner.c and made mode agnostic (which it should be) - added optional rewinding for pathplans
2015-06-04 12:51:47 +02:00
Corvus Corax
9a6cf9d21b
OP-1900 OP-1054 added emergency thrust cutoff feature to main fixed wing autopilot on loss of control
2015-06-04 12:51:46 +02:00
Corvus Corax
876f8eca1d
OP-1900 New settings for autotakeoff/autoland added
2015-06-04 12:51:46 +02:00
Steve Evans
d41808ecaf
Merge branch 'rel-nano-15.05' into steve/OP-1904_Display_current_TxPID_settings_on_OSD
2015-05-30 12:14:47 +01:00
abeck70
c8ff29c404
Merge remote-tracking branch 'origin/steve/OP-1903_Add_TxPID_controls_for_AttitudeSettings' into rel-nano-15.05
2015-05-30 19:31:46 +10:00
abeck70
78b56b29e0
REVONANO Tuning of altvario and braking
2015-05-28 08:47:26 +10:00
abeck70
a232bb393e
Merge branch 'samguns/OP-xxxx_Remove_PWM_RX_while_use_OneShot' into abeck/nano-rc4-fixes
2015-05-26 21:03:14 +10:00
samguns
8551048354
REVONANO 1. Sanity check for PWMSync & OneShot while using PWM receiver. 2. Remove CC in hwsettings.xml
2015-05-26 15:01:01 +08:00
abeck70
bddb9377a4
REVONANO Land and Takeoff uav changes removing abort state.
2015-05-25 22:25:07 +10:00
abeck70
cdf1b88cc0
REVONANO VelocityRoam fixes
...
1. New VelocityRoamHorizontalVelPID to allow tuning of VR independent of pathfollower nav modes
2015-05-25 22:24:06 +10:00
Steve Evans
a0d6de4e1d
Merge branch 'rel-nano-15.05' into steve/OP-1904_Display_current_TxPID_settings_on_OSD
2015-05-24 13:00:44 +01:00
Steve Evans
5a9ee46742
OP-1904 Initial commit
2015-05-23 21:55:19 +01:00
Steve Evans
b2dd03cf23
OP-1903 Add AccelTau, AccelKp and AccelKi to TxPID
2015-05-23 14:00:50 +01:00
abeck70
b3817007c4
REVONANO update limits
2015-05-23 22:25:22 +10:00
abeck70
064a5e831b
OP-1898 VelocityRoam gets its own MaxRollPitch
...
This allows smoother velocityroam flight
2015-05-22 21:23:10 +10:00
abeck70
c272c4d4fc
OP-1898 VelocityRoam AltVario update tuning values based on FTT feedback
2015-05-22 19:07:06 +10:00
abeck70
ee43c53cee
Merge branch 'rel-nano-15.05' into abeck/OP-1898-VR
2015-05-22 18:46:09 +10:00
abeck70
22b2317732
Merge branch 'theothercliff/OP-1464_Handle_Autobaud_code_for_GPS' into rel-nano-15.05
2015-05-22 18:34:17 +10:00
abeck70
55b3b52c4f
OP-1898 VelocityRoam flight mode
...
Replace PositionRoam with VelocityRoam
Make VelocityRoam an explicit flight mode to simplify access
Disable PositionRoam as not supported and not suitable to retain.
2015-05-22 17:34:43 +10:00
Cliff Geerdes
ced0d4725b
OP-1464 Rename things as requested Implement autodisable as advised by Alessio
2015-05-21 04:37:44 -04:00
Cliff Geerdes
55a43d1815
OP-1464 Compile warning discovery Remove AbConfStoreDisable
2015-05-20 01:04:06 -04:00
Cliff Geerdes
244c9e2d5e
Merge branch 'rel-15.05' into theothercliff/OP-1464_Handle_Autobaud_code_for_GPS
2015-05-19 21:57:34 -04:00
Cliff Geerdes
de521c9004
OP-1464 tested version with debug still in place
2015-05-19 19:33:31 -04:00
Cliff Geerdes
92295559b0
OP-1464 GPS autobaud - stash while debugging newobject issue
2015-05-18 18:37:53 -04:00
Alessio Morale
1ce23d722c
REVONANO - Raise the number of leds supported to 10, added limits
2015-05-18 21:30:05 +02:00
m_thread
300a2c38ca
REVONANO - Added limits for receiver port enum on nano.
2015-05-18 21:30:02 +02:00
Alessio Morale
15e7286078
MPU9K - merge 9k and 6k settings into a single uavo
2015-05-18 21:29:56 +02:00
Stefan Karlsson
3d0607c4dc
Fix broken GPS UAVO
2015-05-18 21:29:56 +02:00
Mathieu Rondonneau
66b06e4c9a
REVONANO - Add MPU9250 support
2015-05-18 21:29:42 +02:00
abeck70
f76fee6810
OP-1884 New defaults for GyroTau and Lowpass mpu filter
2015-05-16 22:47:34 +10:00
abeck70
8cb7aeacf7
OP-1882 set thrust control to auto as default
2015-05-16 22:32:22 +10:00
abeck70
1e9f7d9892
OP-1847 update vertical velicity Kp
2015-05-16 22:31:42 +10:00
abeck70
f4d1fc13ec
OP-1847 gps assist fixes
...
1. Update vtol vertical pids
2. Reduce deadband on throttle in gpsassist auto throttle to avoid large deviations in throttle change from neutral
3. Reinitialise assisted control state on mode change where the flight is the same but only gpsassist is going from disabled to enabled or enabled to disabled.
2015-05-14 20:07:07 +10:00
abeck70
fd42beeb6d
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into steve/OP-1849_flexio_com_bridge
2015-05-14 17:24:05 +10:00
Cliff Geerdes
4c794ff9ab
OP-1840 set ubx autoconfig default to disabled
2015-05-14 02:35:59 -04:00
Steve Evans
1771d347bb
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge
2015-05-13 20:36:06 +01:00
Steve Evans
fd00cd8210
Merge branch 'next' into steve/OP-1803_s.bus_dropped_frames
2015-05-13 20:29:54 +01:00
abeck70
e0919542e7
OP-1848r-altvario updated Kp, Ki, Kd
2015-05-12 17:45:07 +10:00
abeck70
8d2f4722d7
OP-1848 altvario improvements
...
1. Disable velocity pid loop when altvario is not active
2. Add sanity boundf to ensure max min are inforced.
2015-05-12 17:40:28 +10:00
abeck70
43ec464737
OP-1848 altvario improvements
...
1. Avoid neutral thrust calcs in altvario typically used in forward flight
2. Capture stick state for debugging into altitudeholdstatus
2015-05-10 19:05:36 +10:00
abeck70
0ef6779701
OP-1848 altvario tidyup of NE controllers in pathfollower
...
Change ILimit variable name to Beta in multiple PID loops that now use pid2 implementation.
Change velocity controller yaw from axislock to rate.
2015-05-09 23:03:53 +10:00
abeck70
829a9c5663
OP-1848 altvario code review comment
2015-05-09 14:42:26 +10:00
abeck70
d6123c018d
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-09 14:31:57 +10:00
Daniël Koek
20b01a548a
OP-1855 changed , to :
2015-05-08 21:28:51 +10:00
abeck70
d97cf3a430
OP-1863 RateTrainer add additional limits to avoid RateTrainer as a thrust mode appearing
2015-05-08 21:16:03 +10:00
abeck70
ddefd11b7f
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-07 11:28:24 +10:00
abeck70
143f09d216
Merge remote-tracking branch 'origin/rel-15.02.02' into next
...
Conflicts:
flight/modules/Actuator/actuator.c
2015-05-06 08:35:21 +10:00
abeck70
5bffc73b17
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
...
Conflicts:
flight/modules/Stabilization/outerloop.c
2015-05-05 21:47:19 +10:00
abeck70
00aae3c5a3
OP-1847 altvario update of tuning parameters for piddown control
2015-05-04 08:50:44 +10:00
RS2K
57d062ff67
OP-1835 - Motor Constraints for 15.02.02
...
OP-1835 - Motor Constraints for 15.02.02
2015-05-02 12:55:43 -05:00
abeck70
b479bd5436
OP-1848 altvario TxPID support
2015-05-02 23:57:18 +10:00
abeck70
21c54c3a37
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-01 22:59:36 +10:00
abeck70
b4d727db98
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch
2015-05-01 21:53:35 +10:00
abeck70
09e2c6f00e
OP-1863 RateTrainer
...
Initial commit for code review
2015-04-28 21:54:58 +10:00
samguns
09a00f8990
Merge branch 'rel-15.02.02' into samguns/zh_CN_GCS
2015-04-27 11:56:25 +08:00
m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
abeck70
e36ab50040
OP-1838 altvario
...
Fixes and tidyup.
TODO:
1. Fix UI for sliders
2. Disable vtol tuning on stabi input
3. Altitude loss feedback
2015-04-23 22:49:12 +10:00
abeck70
d469a754bf
OP-1848 ready for review
...
AltVario:
1. Uses new PID scheme
2. Runs at the outer loop rate to save CPU cycles
2015-04-23 15:51:09 +10:00
Steve Evans
79339d677f
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb
2015-04-21 07:44:50 +01:00
Alessio Morale
ab36dcbdee
Merge remote-tracking branch 'origin/rel-15.02.02' into next
2015-04-20 14:54:07 +02:00
Alessio Morale
2571db4d96
Merge remote-tracking branch 'origin/laurent/OP-1814_Battery_reset_mAh' into next
2015-04-20 14:29:16 +02:00
Alessio Morale
061ef1e377
Merge remote-tracking branch 'origin/amorale/OP-1828_optional_analog_inputs' into next
2015-04-20 12:08:34 +02:00
abeck70
1e9bd43871
Merge branch 'next' into abeck/OP-1760-autotakeoff-squashed
2015-04-19 17:52:35 +10:00
Alessio Morale
5c76c0ee07
Merge remote-tracking branch 'origin/steve/OP-1289_two_telemetry_streams' into next
...
Conflicts:
flight/modules/Telemetry/telemetry.c
2015-04-18 19:10:13 +02:00
abeck70
04c42bd316
OP-1760 autotakeoff
...
1. Make autotakeoff height configurable
2. Fix the pidcontroldown transfer to solve the rough transition between pid controllers for landing, takeoff, braking etc.
2015-04-16 21:22:37 +10:00
David Ankers
1f8fd29e2f
OP-1831 - Update Ki Limits
2015-04-15 09:48:54 +02:00
abeck70
a52969a76b
OP-1760 Autotakeoff
...
Squashed commit as code reviews impossible otherwise due to dependencing on OP-1696
2015-04-12 21:39:31 +10:00
Alessio Morale
e1bc8914e8
OP-1828 - Raise the number of ADC inputs supported
2015-04-09 00:26:04 +02:00
Laurent Lalanne
2350acb068
OP-1814 Add ResetConsumedEnergy option to flight side
2015-04-04 22:34:22 +02:00
Steve Evans
2843715432
Merge branch 'steve/OP-1289_two_telemetry_streams' into steve/OP-1803_s.bus_dropped_frames
...
Update with taskinfo update
2015-04-03 12:46:12 +01:00
Steve Evans
91e03a1541
OP-1289 Adding tracking of new RadioTx task
2015-04-03 12:37:37 +01:00
Steve Evans
a60baf281f
OP-1803 Initial commit
2015-04-02 19:09:38 +01:00
Alessio Morale
fbaf39229b
Merge remote-tracking branch 'origin/cyr/OP-1739_GNSS' into next
2015-03-22 20:25:51 +01:00
abeck70
88494e2745
OP-1696 PathFollower rewrite in C++ and Landing Squashed commit of the following:
...
commit 580cd8addafadc3109b90b1fd183130ea8add7f2
Author: abeck70 <abeck70@icloud.com>
Date: Fri Mar 20 21:32:33 2015 +1100
OP-1696 Cleanup and bug fix
1. Code review cleanup
2. Fixed gps assist braking - the thrust limits in piddown were not being set.
commit 31ac4494f6e2bc5859f49d1f76f19fe3a4d32862
Author: abeck70 <abeck70@icloud.com>
Date: Wed Mar 18 08:31:16 2015 +1100
OP-1696 fix initialisation of down pid control parameters
commit a7bd737459249530bde9546b8247dd45b40dced4
Author: abeck70 <abeck70@icloud.com>
Date: Tue Mar 17 21:18:38 2015 +1100
OP-1769 Actuator fix from code review
commit 968172b8fb46c91b2611be4825e17faf2fa13411
Author: abeck70 <abeck70@icloud.com>
Date: Tue Mar 17 21:01:11 2015 +1100
OP-1696 fixed ground pathfollower settings xml
commit 721c07b67a87911ed67d0b62aa658cfac6d3eb97
Merge: f556215 be9f4ae5c9b6faad44b315a9cfa6ba5f3958c31f96843325d04f4cd91102243deafed693fb2d53e15cac57e0a8b31c1385db7d605
2015-03-20 21:42:20 +11:00
abeck70
0aba013b96
OP-1769 add dependent vtolpathfollower setting change
2015-03-10 23:13:35 +11:00
abeck70
993481c11e
OP-1764 added flight side sanity checks
2015-03-09 21:31:42 +11:00
m_thread
779415c384
OP-1759 Added limits to field. Changed attached attribute in .ui file to enable limits.
2015-03-03 23:00:52 +01:00
Erik Gustavsson
0610262cc3
OP-1739 Add (untested) BeiDou support to flight side.
2015-03-01 17:28:43 +01:00
Erik Gustavsson
4ada3d90d9
OP-1739 Add "Default" setting to GNSSMode which skips the GNSS selection
...
during autoconfig, e.g. for use with UBX6
2015-02-28 13:17:22 +01:00
Erik Gustavsson
2c403d5323
OP-1739 Add GNSS mode to GPS settings UAVO.
2015-02-28 08:09:45 +01:00
Erik Gustavsson
aa99c56eb3
OP-1739 Add separate color for GLONASS sats. Fix sat PNR > 127.
2015-02-28 08:09:45 +01:00
abeck70
2af67618a4
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/test-oneshot
2015-02-23 18:55:51 +11:00
abeck70
58f5565e30
OP-1738 Fix flightmodesettings default
...
Change Stabi6 from CruiseControl to Manual for Rate/Rate/Rate default to avoid conflict in config due to new sanity check.
2015-02-23 18:05:47 +11:00
abeck70
0cd7e20425
Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot
2015-02-23 16:47:12 +11:00
Alessio Morale
ad42ca7f16
Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next
2015-02-22 16:28:04 +01:00
Alessio Morale
60abae8a8b
OP-1685 - Rename PIN6 to PIN8 (that's Input6)
2015-02-22 13:25:07 +01:00
Laurent Lalanne
25c8d43db3
Merge remote-tracking branch 'origin/laurent/OP-1635_Remove_QuadH_config_tab' into next
2015-02-18 02:56:23 +01:00
Alessio Morale
39513f0533
OP-1685 - Rename OneShot to PWMSync to avoid confusion
2015-02-17 23:20:07 +01:00
Alessio Morale
096a321181
OP-1685 - calls sanitychecks after updates to actuatorsettings, update board sanitycheck rules
2015-02-11 23:59:23 +01:00
Alessio Morale
fd299b559a
OP-1685 - Add custom sanity check hook to test OneShot availability
2015-02-11 22:33:57 +01:00
Alessio Morale
a4da83a1be
OP-1685 - Add OneShot compatible configurations
2015-02-11 22:33:57 +01:00
Alessio Morale
f290d6d89d
OP-1685 - Implement OneShot on F1
2015-02-11 22:33:57 +01:00
Laurent Lalanne
6da3c99af2
OP-1635 Remove QuadH in config tab - AirframeType
2015-02-10 22:48:43 +01:00
Alessio Morale
46521f1c2d
Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next
2015-02-08 17:59:59 +01:00
Alessio Morale
e48c3b7162
Merge remote-tracking branch 'origin/cyr/OP-1650_OPLinkReceiver_spam' into next
2015-02-08 17:50:19 +01:00
Alessio Morale
cf791db71e
OP-1658 - Implementation of Sensor Module using PiOS Sensors Framework
2015-02-03 00:00:05 +01:00
Karl Knutsson
137c183ec2
OP-1522 Remove unused channel set cfg
...
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
b0491da115
OP-1576: Remove unused tx_resent counter
...
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
2015-02-02 21:25:38 +01:00
Erik Gustavsson
511a9af2ac
OP-1650 Remove update on change from OPLinkReceiver object to stop
...
telemetry spam with OPLink PPM enabled.
2015-01-31 22:11:43 +01:00
Alessio Morale
6f3f7b9972
OP-1683 - fix limits handling and definitions
2015-01-30 21:43:59 +01:00
Alessio Morale
411416d2a1
OP-1683 - Fix compilation for CC (not yet supported)
2015-01-24 00:18:20 +01:00
Alessio Morale
47e1312982
OP-1683 - Implement oneshot/oneshot125 mode to actuator module
2015-01-23 23:51:53 +01:00
Laurent Lalanne
68f9763e73
OP-1652 Typo FlexiIOPin
2015-01-21 14:32:21 +01:00
Laurent Lalanne
9828e4a5bf
OP-1652 Rename Flex-IO pins for ws281x leds
2015-01-21 14:03:18 +01:00
abeck70
2b6d79467c
gpsassist:code review comments
...
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
2015-01-09 07:51:37 +11:00
abeck70
b1c94e83d0
gpsassist: One commit new branch
...
Collapsed into one branch for a new code review. Some unnecssary committed files removed.
2015-01-08 13:20:47 +11:00
Fredrik Larsson
4f7fc1bac7
Merge remote-tracking branch 'origin/corvuscorax/OP-1599_positionvario-reworks' into next
2014-12-14 23:45:57 +11:00
Fredrik Larsson
97759871c5
Use generic DSM type for all Sats
2014-11-22 04:55:20 +11:00
Corvus Corax
5f352f54a3
OP-1599 updated defaults for position roam mode settings, do not low pass filter throttle
2014-11-10 19:06:27 +01:00
Corvus Corax
7a53cd0933
OP-1599 removed autotune from hwsettings
2014-11-08 16:30:11 +01:00
Corvus Corax
8fe21ed297
OP-1599 removed autotune from all flight code
2014-11-08 16:17:39 +01:00
Corvus Corax
c0e66a8acf
OP-1599 renamed flightmodes
2014-11-08 16:01:59 +01:00
Corvus Corax
db0ba763bf
OP-1599 add low pass filter to control input in vario mode to possibly reduce rubber-band effect - needs test and tuning
2014-11-08 13:32:40 +01:00
Corvus Corax
7d2ca3d92f
OP-1599 added course lock mode, renamed other position vario modes
2014-11-08 12:59:55 +01:00
Alessio Morale
6681d54ca9
Merge remote-tracking branch 'origin/amorale/OP-1584_cc3d_ram_issue' into rel-14.10
2014-11-03 22:23:48 +01:00
Laurent Lalanne
a55aff2723
Deadband by default, fix value. Should be 0.02 for 2%
2014-11-02 16:15:33 +01:00
Fredrik Larsson
77d11eafe7
Deadband by default, will be detected and overwritten by new TX wizard
2014-11-02 11:53:53 +11:00
Alessio Morale
e04825e7b7
OP-1588 - Remove *relay flight modes
2014-11-01 16:11:11 +01:00
Fredrik Larsson
2016f1bc43
spacing
2014-11-01 10:06:44 +11:00
Fredrik Larsson
30c60d1024
More tweaking of defaults
2014-11-01 09:35:08 +11:00
Fredrik Larsson
35ba69474b
Minor default change for insanity factor in Acro+
2014-10-26 23:39:26 +11:00
Laurent Lalanne
63f88fd851
OP-1570 Wrong defaults mixing for default airframe (QuadX)
2014-10-25 12:45:33 +02:00
Fredrik Larsson
90d79a903f
Change Default Fusion Algo
2014-10-22 01:11:26 +11:00
a*morale
7c1265ee30
OP-1548 - Change Fusion algorithm names to make clear their pourpose
2014-10-21 00:49:00 +02:00
a*morale
561fb364a5
OP-1548 - Adding limits to FusionAlgorithm
2014-10-21 00:12:09 +02:00
Alessio Morale
c661920039
OP-1520 - another two modes removed from yaw
2014-10-18 15:20:50 +02:00
Alessio Morale
77860c1448
OP-1520 - remove unsuitable modes for yaw
2014-10-18 15:10:19 +02:00
Alessio Morale
c45c18261c
OP-1544 - Change default GPSSettings.UbxAutoConfig option to Configure
2014-10-18 11:44:49 +02:00
