1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-14 21:23:52 +01:00
Commit Graph

2135 Commits

Author SHA1 Message Date
peabody124
5f2c502172 Arm checks: Simply don't check GPS because the dependence on AHRS Settings
breaks CC.  This should be done by the GPS alarm being set only when
appropriate (i.e. by AHRS on OP when needed) and not by the GPS module.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2824 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-21 05:58:24 +00:00
pip
0c48fe258a Changed alarm level checking from WARNING level to ERROR level before allowing arming.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2822 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 19:34:27 +00:00
pip
88cf1e276a Ignore Telemetry alarm when arming (telemetry alarm no longer prevents arming).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2821 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 17:53:03 +00:00
pip
df26016c64 Added alarm check when trying to change state to ARMED mode (from DISAMRED mode), if any warnings are set then it will not go into ARMED mode - unless the GPS is not required, in which case the GPS alarm will be ignored (if using Simple or Indoor AHRS modes). These checks are done in the okToArm() function.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2820 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 16:42:31 +00:00
pip
578b779a76 Fixed PPM compile errors - you can now compile for PPM input if desired.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 13:41:19 +00:00
pip
c214833346 oops!! .. enabled PPM and disable PWM by default .. sorry
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2817 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 13:40:19 +00:00
pip
d733f08a0e Fixed PPM compile option (missing pin defines)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2816 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 13:12:08 +00:00
sambas
8d6f320fca Handle I2C defines better, needed in CC for now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2815 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-20 07:14:02 +00:00
osnwt
6613158206 BootloaderUpdater: fixed compilation errors. It works with CC too (tested).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2813 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 19:18:03 +00:00
FredericG
c9060393e5 OP-302 Remove threads from modules that do not need them - Battery Module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2812 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 18:56:52 +00:00
FredericG
374e822f79 OP-302 Remove threads from modules that do not need them - ET OSD module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2811 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 13:25:27 +00:00
FredericG
c5f814a931 ET OSD, WIP, measure timing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2810 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 10:18:00 +00:00
pip
9a2bdac49c Reduced CC CPU usage from 57% to 46% by moving the floating point multiplies outside of the accelerometer downsample/averaging loop in the updateSensors() function.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2809 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 09:33:03 +00:00
FredericG
ec634ef3e7 debug-pins, small fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2808 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 09:11:00 +00:00
zedamota
9050608e6c Flight/Bootloader - Bootloader updater, minor update to help user with the CL options
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2805 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-17 15:02:10 +00:00
zedamota
56c195fa9a Flight/Bootloader - Bootloader updater, WORKING - tested with PipX only (should work for all boards though).
Led(LED1 different color on each board) Sequence:
1-Power On
2-Led ON for 3 seconds (you can disconnect during this time - safety measure) 
3-Led flashes very quickly while the board is being programed (because the program is stored in memory this is very fast and looks like a led glitch)
4-If all good - LED flashes 3 times with a 1sec period and turns off - you may now reboot.
4-If an error ocurred - LED will keep flashing with a 500ms period until power off

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2804 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-17 14:54:57 +00:00
zedamota
949617e236 Flight/Bootloader - Bootloader updater, minor fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2801 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-16 15:04:59 +00:00
pip
60e7665aec A bug fixed that caused carrier frequency to go way off when setting the modem to one of the Tx-carrier/Tx-spectrum test modes (and back).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2799 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-16 12:32:44 +00:00
zedamota
993a4a7c5f Flight/Bootloader - Bootloader updater, needs testing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2798 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 17:42:24 +00:00
corvus
435072cf4e Modules/Stabilization, Modules/ManualControl:
Move channel StabilizationSettings from ManualControlCommand to
AttitudeDesired, unify channel normalization and put them all into ManualControl

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2797 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 14:55:00 +00:00
pip
9899c270cb Removed unused code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2796 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 13:10:18 +00:00
pip
ac7cfcc358 Added "Ready-To-Send-Time" parameter adjustment
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2795 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 12:57:46 +00:00
zedamota
0abec1908d Flight/Bootloadera - small cleaning up. Start of Bootloader Update firmware witch will enable users to update the Bootloader itself without JTAG.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2794 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 18:15:25 +00:00
pip
f75539dcc6 Reverted GYRO calibration detection.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2791 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 09:01:47 +00:00
stac
3b34cc71b4 bl_pipxtreme: bind to new COM driver
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2789 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:42 +00:00
stac
5ac55a35e3 bl_coptercontrol: bind to new COM driver
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2788 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:39 +00:00
stac
000234f036 bl_ahrs: bind to new COM, USART and SPI drivers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2787 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:35 +00:00
stac
bbb3882826 bl_openpilot: bind to new COM, USART and SPI drivers
- Removed all unnecessary device instances and their cfg's.
  - SPI to SD card
  - I2C
  - Aux USART
- Moved SPI baudrate setting into cfg rather than init func.
- Abstracted forcing slave select under OPAHRS API.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:32 +00:00
pip
74502852c3 Added GYRO calibration detection into the adc_callback() routine - to pass raw values when calibrating the gyro's.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2780 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 20:04:25 +00:00
peabody124
52f09e5d55 Add compile time flag (USE_SPEKTRUM) to enable spektrum support until the
dynamic switching is done.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2778 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 17:43:44 +00:00
stac
967bb9bb9c pipx: COM device ids are now 32bit not 8bit
The COM layer now uses 32bit device ids rather than
8bit.  All code that stores these ids must now use
uint32_t to hold them.

Since these 32bit numbers are really just opaque
pointers, it is (reasonably) safe to assume that
they won't be 0.  The logic around tracking the
*_previous_com_port could probably be cleaned up
to remove that assumption.

Missed this fixup in the recent hwinit changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2776 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 15:54:26 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested.
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
peabody124
ebb8596db0 AHRS: FIx calibration. Move the mag data processing into the loop that acquires accel and gyro
data.  I don't like this but because of the way the calibration routine works
(sets all gains to 1) this makes the values so far out or range the EKF doesn't
get to run and the mag wasn't previously being updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2765 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-09 05:17:32 +00:00
peabody124
93ee2765be Whitespace fix (removing spaces)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2762 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:58 +00:00
peabody124
8498512855 CC-20 Attitude initialization: Make sure no divide by 0 condition possible
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2761 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:55 +00:00
peabody124
9ed0882df9 PiOS/USART: Apply same fix as Spektrum to force read of DR whenever there is an
error flag set

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:52 +00:00
peabody124
7e78e8af04 CC-21 PiOS/Spektrum: Prevent condition that can tie up USART interrupt and locks up
CC.  Must always read the DR to clear the error flags.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:49 +00:00
peabody124
a3ba9c3781 CC-21 Make it possible to enable Spektrum on CC, although it eats up S6 in
order to free a timer.  Mode PIOS_DELAY (not working cleanly) to TIM3 because
Spektrum resets TIM2 count.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:45 +00:00
peabody124
9f71f4121c CC-18 Attitude: Change units to proper engineering ones. An accelKp=1 means
that it will completely follow the accel attitude each cycle and is way too
high.  Ki=1 means the gyro bias wil be correct by accels each cycle (way too
high).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:35 +00:00
peabody124
cfe295377c CC-18: Normalize the gravity vector to unity gain
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2754 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:31 +00:00
peabody124
74cc7dbfc9 CC-20 Attitude: Jack up Kp and Ki values for first 5 seconds to force faster
convergence of gyro bias, then the normal values can be lower.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2753 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:28 +00:00
peabody124
6ac2ddb0c1 CC: Make default build non-debug. This leaves a bit more RAM overhead.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2752 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:24 +00:00
peabody124
682b49df44 CC: Increase the SPI clock rate to minimize time spent in that routine
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2751 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:21 +00:00
peabody124
03fb82ad0a CC Attitude: Change when AttitudeRaw is set to end of attitude estimation,
because this is what is determines when the Stabilization code executes.
Because we aren't oversampling gyros relative to the PID in CC we should set
the attitude first (computational time to do so is negligible).

Also change update rate to 500 Hz.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2750 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-08 16:34:18 +00:00
pip
d12868f1a3 A few more #define capitalizations.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2748 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-07 12:30:27 +00:00
pip
b2eb141c10 100mW appears to be working again. A few bug fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2745 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 21:21:50 +00:00
FredericG
d7fc7646b0 OP-246 UAVOBJ CHANGE - Setting to disable arming/disarming
options="Always Disarmed,Always Armed,Roll Left,Roll Right,Pitch Forward,Pitch Aft,Yaw Left,Yaw Right" defaultvalue="Always Disarmed"

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2744 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 16:16:20 +00:00
pip
6559615ef8 Made quite a few constants/#defines capitals (previously lower case)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 10:55:08 +00:00
sambas
14641cd353 Fix, was outputting "\n" strings into InitMods.c which failed to build
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2742 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 07:21:45 +00:00
stac
4e6b539086 debugpins: Add definitions for debug pins
Not yet used anywhere but will eventually allow
debug pins to be assigned during runtime init based
on configuration found in a new uavobject.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2741 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 01:03:06 +00:00
stac
9f595842dd modinit: put initcalls on separate lines
This makes it easier to step through the module init
sequence in gdb.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2740 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 01:03:02 +00:00
corvus
afdaf88d4a UAVObjects: Allow Generation and Initialisation of individual UAVObjects
per target as defined in Makefile (and/or Make include file) For
OpenPilot this is flight/OpenPilot/UAVObjects.inc For sim_posix and
sim_win32 needs rebuild of uavobjectgenerator and uavobjects!

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2736 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 22:17:40 +00:00
pip
9a5d099a79 Started to write the PPM, spectrum scanner and continuous packet stream modules.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2731 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 13:45:16 +00:00
peabody124
56d4d54a97 CC: Increase the memory for the modules after removing PriTxTask from CC and
also increase the telem queue to decrease event errors (can be reverted later if
we need the memory back)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2730 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 10:52:59 +00:00
peabody124
f97d853c80 Make the PriTx queue optional which saves 700 bytes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2729 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 10:52:52 +00:00
peabody124
efca295ea0 Modules/Guidance: Fix a bug Corvus caught
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2727 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-05 01:14:55 +00:00
pip
41768be215 Allows modem mode to be set - BUT NOT YET IMPLIMENTED, use NORMAL mode for now.
Fixed bug in pipx plugin import function - wasn't restoring the AES key.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2726 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 23:00:48 +00:00
pip
b50965ba9f Fixed AFC reading
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2719 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 10:03:47 +00:00
peabody124
04f54928d6 Modules/Guidance: Fix a bug Dale caught about not grabbing settings and also
correct a typo when NedAccel.Down wasn't used.  Finally increase stack size of
guidance task.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2718 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 20:00:00 +00:00
pip
3bad7982dd Fixed RSSI when no signal received.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2714 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 13:12:30 +00:00
pip
ac5155f3d9 Increased RF packet ping speed if the GCS is monitoring the RSSI.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2712 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 11:31:34 +00:00
pip
0e3ae58c96 New PipX config protocol packets. YOU NEED TO RECOMPILE THE GCS PLUGIN to use this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2711 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 07:05:32 +00:00
peabody124
e5b26bc67d More memory tweaks to keep CC flowing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2709 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:49 +00:00
peabody124
fedadb1275 CC-8: Move the queue registration into the ADC PIOS driver to allow other
functions to use it easily

Conflicts:

	flight/Modules/Attitude/attitude.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2707 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:43 +00:00
peabody124
810fa70856 UAVObjects: Remove the raw versus filtered fields in the sensor data. Save
some memory.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2706 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:39 +00:00
peabody124
c95a6447bf CC-8 Whenever the gyro data is updated the callback now pushes the data onto a
queue, which update sensors waits for.  This confirms one update per gyro
update.  All available accel data will be pulled off each time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2705 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:42:33 +00:00
vassilis
90fd4551b6 Flight/SITL: Enable debug of Python scripts
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2704 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 02:02:34 +00:00
corvus
f2ef99a2d9 SiTL_win32: Adapted for autogenerated UAVObject Makefile - needs testing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2703 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 20:15:33 +00:00
corvus
16eef53f02 UAVObjectgenerator: Autogenerate Make include-file for flight UAVObjects to be used in firmware Makefiles.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2702 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 20:15:28 +00:00
corvus
8de340b5a8 UAVObjectgenerator: Autogenerate Make include-file for flight UAVObjects to be used in firmware Makefiles.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2701 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 20:15:16 +00:00
pip
7f8b0d5788 Fixed carrier frequency problems.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2700 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 17:53:46 +00:00
pip
40e9a592c8 PipX modem can now be configured from GCS in realtime.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2695 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 11:44:23 +00:00
peabody124
986e124202 CC-7 Reverse order of two lines so that yaw bias converges instead of diverges
:-)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2693 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 09:16:28 +00:00
peabody124
265737427b CC-7: Make the gyro scale adjustable (for now at least, this was largely for
debugging, let's compare values).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2692 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 08:57:42 +00:00
peabody124
1663a838ff CC-7 Full complimentary filter ala Mahoney paper using quaternion
representation.  Also improved gyro bias initialization.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 08:57:38 +00:00
peabody124
cf2e9fb349 Memory: Also allow overriding Stabilization stack size
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2690 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 08:57:34 +00:00
pip
2c3e540637 Code added to allow GCS to configure modem. Not yet finished - modem needs rebooting after uploading new config - for the time being.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2687 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:40:40 +00:00
peabody124
77ce0d6391 Actuator: Fix bug I made a while ago that stops servos going negative values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2677 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 21:05:00 +00:00
peabody124
877bcca880 Delete hardcoded min and max servo PWM times, they weren't used. Use the
configuration settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2676 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 21:04:58 +00:00
cwabbott
23db2e9601 Fix UAVObject stuff for win32 sim, and fix pios_servo as well.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2675 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 19:11:24 +00:00
peabody124
c3aa5ed8f3 Posix: Add the constants for telemetry queue sizes and also make the actuator
SetHz calls compatible with the PiOS API change

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2672 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 15:47:02 +00:00
peabody124
d33d044088 Revert "Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures""
Putting Corvus patch back in.  Need to delete uavobjects-synthetics directory
for this to work.

This reverts commit 9cd98bec8fb5e0679c625eb256a94d161a8ce345.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2671 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 15:46:59 +00:00
peabody124
f93ed5f01f CC Module memory: Make it clean for CC to override the stack sizes of modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2668 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:35 +00:00
peabody124
b1e4b65f3d CC-1 Bigger oversampling window for CC sensor data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2667 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:31 +00:00
peabody124
1c6b51b704 UAVObjects/AttitudeSettinsg: Object for CC to tune the attitude estimation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2666 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:26 +00:00
peabody124
15f3ada700 Get rid of ms * 10 units since the time resolution of FreeRTOS is in ms
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2665 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:22 +00:00
peabody124
3f088bed8d CC-9 1. Improve the timings of the attitude estimation
2. Disable FirmareIAP module in CC (somehow causes lockups when also using vTaskDelayUntil in Attitude WTF)
3. Make the SPI bus run a little faster so we can handle the 3200 Hz from accel
while running the filter at 333 Hz

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2664 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:19 +00:00
peabody124
8b2034ea05 CC-15 Settings: Delete settings from flash chip (hacky sector based saving)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2663 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:15 +00:00
peabody124
97acaa2402 CC-15 Gets settings saved to flash chip on CC using crude sector based storage.
Sector based on Object ID so could overlap :-(.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2662 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:12 +00:00
peabody124
ea91042f38 CC-6 Fixed bug in flash read write addresses
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2661 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:08 +00:00
peabody124
e27c9c0b7a CC-6 Rename Flash function to not be all upper case consistent with other PIOS
functions

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:18:04 +00:00
peabody124
1d2ad6e9cb Telemetry: Move the telem stack size to the board definition file since CC
needs less

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:59 +00:00
peabody124
c9207b3754 CC-14 PIOS/Servo: Set more than two bank speeds
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:55 +00:00
peabody124
200f9a7247 FirmwareIAP: Whitespace fix, spaces to tabs
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2657 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:51 +00:00
peabody124
79ed1578a8 Update XCode project
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2656 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:46 +00:00
peabody124
1cf7555b7d CC-10 Rename CCAttitude to Attitude. If there are alternative ones we will
just have nested subdirectories of Attitude

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2655 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:40 +00:00
peabody124
85d42868d6 CC-10 Rename the TaskInfo and Alarm field for CCAttitude to Attitude
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2654 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:36 +00:00
peabody124
063c58e7c0 CC-12 Enable Watchdog on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2653 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:32 +00:00
peabody124
037a63ee1d CC-1 CC-8 Cache the oversampled gyro value and use that to get rid of glitches.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 02:17:27 +00:00
peabody124
bbbdea26b9 Revert "Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures"
Note: This patch did not build after a clean build.

This reverts commit 7e75b5d16481a32689433c868b67916816d8b9fb.

Conflicts:

	flight/CopterControl/Makefile

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2651 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:56:02 +00:00
peabody124
87881734b0 Add GDB debugging scripts for CC and PipX
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2650 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:58 +00:00
peabody124
29ad7b3017 CC-13 Get FirmwareIAP reset working on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2649 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:54 +00:00
peabody124
42b21a2697 OP-300 FirmwareIAP: Change to use event dispatcher callback to determine when
to reset OP (sends reset command to INS)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2648 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 01:55:43 +00:00
corvus
c2ba1f517b Fix to make stacs auto-loading of UAVObjects downwards compatible, since its not working on all architectures
On architectures supporting automatic initializing, flight/UAVObjects/uavobjectsinit_linker.c is used
On architectures NOT supporting automatic initializing, an uavobjectgenerated file build/uavobject-synthetics/flight/init/uavobjectsinit.c is used
build/uavobjects-synthetics/flight/uavobjectsinit.c went away, so that a wildcard include in the Makefile will not include the (wrong) initialisation code in either version



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2640 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 20:37:11 +00:00
corvus
dcb9764647 added include file for auto-linking to sim_posix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2639 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 17:39:23 +00:00
pip
57c7633476 Renamed uavtalk module to api mode
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2637 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 15:44:39 +00:00
stac
880a68a788 uavobj: Convert bootloader-compatible builds to autogen init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2633 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-31 00:57:24 +00:00
stac
b5426e09d0 uavobj: Convert CC over to use autogenerated uavobjinit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2631 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 22:46:51 +00:00
stac
083e2b01a9 uavobject: Use linker to produce uavobj initcalls
The UAVObject initcall list is now automatically
generated at link time based on the exact set of
UAVObjects linked into the firmware image.

This will allow any subset of UAVObjects to be
used in any firmware image.

The uavobj_initcall() macro automatically adds the
marked function's address into the .initcalluavobj.init
ELF section.

The UAVObjectsInitializeAll() function now simply
iterates over the functions listed in the
.initcalluavobj.init section and calls them.

You can see the contents of this section in the ELF file
like this:
  ./tools/arm-2009q3/bin/arm-none-eabi-objdump \
      --syms -j .initcalluavobj.init \
      ./build/openpilot/OpenPilot.elf

This is fundamentally the same mechanism that the Linux
kernel uses to initialize the specific set of components
that the user has selected in their kernel configuration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2630 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-30 22:46:48 +00:00
FredericG
a8bd4d28ad OP-174 ET OSD, do not return from task, the system seems to crash when you do that; anyway the thread will be removed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 17:47:40 +00:00
corvus
04d3a9649d CopterControl: reverting previous commit - doesn't work on windows due to command line length limitations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 16:15:16 +00:00
pip
5daf6fd1c0 Added PIP_DUMP_RAW option in ahrs.c and brought back public acces to function PIOS_ADC_GetOverSampling(void).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2623 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 15:59:35 +00:00
corvus
000a45f1bf CopterControl - Build CopterControl with a Makefile specified subset of UAVObjects - code generation by uavobjgenerator
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2622 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-29 12:36:41 +00:00
zedamota
8236bf8e19 CC-13 CopterControl bootloader - don't know if this fixes it, please try it.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2614 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 21:02:48 +00:00
corvus
6f2e45d414 BigMess: OpenPilot/Makefile: do not have an explicit list of UAVObjects in Makefile, include by wildcard uavobjects/*.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2612 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 20:19:53 +00:00
sambas
f3ce7d7035 OPOP-303 PIOS/Sonar: posix fix, I guess??
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2611 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 19:59:35 +00:00
sambas
ba5ebb6b13 OP-303 PIOS/Sonar: preliminary support for HCSR04 ultrasound altimeter module, tested and working :)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2610 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 19:21:22 +00:00
peabody124
ac031d9b0d OP-256 RC 3 is using TIM5 but wasn't previously handling this ISR. Passing to
the PWM ISR now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 16:01:40 +00:00
sambas
d917ced2f6 Fix for pwm input reset problem? Try the line I commented out because I can't test this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2606 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 13:30:12 +00:00
corvus
0cc957bc9c reverting bad commit of these files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2605 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 12:31:13 +00:00
corvus
e6004ae95e PiOS.posix - split up FreeRTOS port into a linux version (original FreeRTOS linux code) and a non linux POSIX compatible version (Mac OSX, BSD, ...) - OS detection by Makefile.posix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2604 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 12:26:45 +00:00
corvus
0624173489 Big Mess: Cleanup Openpilot/Makefile.posix - UAVObject generation paths and pylib stuff
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2603 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 11:44:37 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 09:25:30 +00:00
edouard
df0b5f9b6c CC-13 CopterControl bootloader first pass. Does not talk on USB for some reason, but starts.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2601 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-27 22:33:13 +00:00
peabody124
99eb1a89f9 CC-5 PIOS/Servo: CC default servo position was 2000 from testing. HUGE SAFETY
ERROR

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2593 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-26 01:25:29 +00:00
peabody124
c759253b77 CC-6 Flash chip working to read ID. Also tweaked how the semaphore for the SPI
bus is used to be a bit safer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-25 17:46:27 +00:00
peabody124
92dd78db51 OP-256 PIOS/PWM: Disable from the pios_board.c file when not using PWM
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 23:17:39 +00:00
sambas
eb6ebb93d2 Build: last patches for windoes, and output targets
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2586 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 20:34:29 +00:00
peabody124
1daabba5c1 Build: Change the lower makefiles to use forward slashes but also create
directories on
windows

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2585 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 20:01:06 +00:00
peabody124
ba1d519192 Get CC working with new file locations and also fix AHRS build to work with
these locations

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2581 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 08:14:00 +00:00
peabody124
3b0be12b67 OP-291 PIOS/Servo: Fix a few interrupt mappins for OP
Also keep the priority of actuator at idle+4, dropping it down slipped through

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2580 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:20 +00:00
peabody124
00a3e82c70 CC-6 PIOS/SPI: Add semaphore to SPI device structure that can be used to ensure
only one CS line is asserted.  No checks are enforced on this by the SPI code
as I cant see a clean way of it being aware of the CS lines.  We could add
another CS mode those which is driver managed per transfer and has a GPIO i
line for each device.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2579 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:17 +00:00
peabody124
d2f3e0d379 CC-6 Initial code for the flash chip on CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2578 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:14 +00:00
peabody124
7554021ed0 OP-256 PIOS/PWM: Set the interrupts correctly
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2577 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:11 +00:00
peabody124
d4b4a6ca37 CC-3 Modules/CCAttitude: Add oversamplign to the accel data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2576 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:08 +00:00
peabody124
21e3441f00 CC-3 Set gyro to downsample 10x to 250 Hz
Conflicts:

	flight/CopterControl/System/inc/FreeRTOSConfig.h

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2575 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:05 +00:00
peabody124
cef46edafd Manual Control: Drop the AHRSSettings dependency to bring task memory down
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2574 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:03 +00:00
peabody124
23599ee59f CC: Set the buffer size of USART smaller and register teh AHRSSettings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2573 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:59 +00:00
peabody124
e16b1bffa9 CC-3 Remove unused code from CCAltitude
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2572 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:56 +00:00
peabody124
2881370eab OP-291 PIOS/Servo: Refer to channels by TIM_Channel_x to be consistent with PWM
system

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2571 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:54 +00:00
peabody124
d5ccb59b5a CC-3 CC Complimentary filter: Strip out some unused code and get the sampling
rate up

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2570 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:51 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:48 +00:00
peabody124
da96ce15b9 OP-256 PIOS/PWM: Converting PWM input to use standard driver structure.
Beginning of unifying the input types into PIOS_RECEIVER.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2568 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:45 +00:00
peabody124
01b09668aa OP-291 PIOS/Servo: Dont need to power up GPIOA/GPIOB in servo since done in sys
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2567 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:41 +00:00
peabody124
99f2f3c68b OP-291 CC Servo configuration: Gets S5 and S6 working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2566 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:38 +00:00
peabody124
108ea8c959 OP-295 Get CC pin mappings consistent for using the temperature sensor
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2565 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:34 +00:00
peabody124
edced9177c OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2564 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:32 +00:00
peabody124
80c97ddfd0 CC-2 CC-3 Modules/CCAttitude: Flip the up-down convention of the board
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2563 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:29 +00:00
peabody124
607cdcac21 Upgrade FreeRTOS to the latest version (6.1.1) which allows compiling with -Os
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2562 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:26 +00:00
peabody124
c55d40bdbc CC-3 Setting up monolithic task template to keep code size down. Importantly
switch to heap_1.c which saves a lot of money.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2561 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:22 +00:00
peabody124
95e7017674 OP-286 UAVObjectManager memory usage: Since first element in linked list always
exists, no need to store pointers to it, but put the structure for the first LL
object in the ObjectListStruct

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2560 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:20 +00:00
peabody124
3fc8169330 OP-286 UAVObjectManager: Dont store pointer to initialize function for
UAVObjects, but pass it in from the macro definition.  Saves memory for each
objects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2559 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:17 +00:00
vassilis
000a7bb54e Flight/Makefile: Fix build error - could not find include files of generated code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2557 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 02:38:32 +00:00
cwabbott
eeac20d4ae The Big Mess part 4: win32 and posix sitl.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2555 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 20:30:25 +00:00
sambas
ae324ffd6e 3rd for Big Mess, bootloaders and pipxtreme
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2549 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:51:43 +00:00
FredericG
f7e6f998ca OP-288 Slight simplification of the ManualControl module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2548 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:38:00 +00:00
sambas
826ce00bf4 another one for Big Mess
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2546 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:18:52 +00:00
FredericG
70f11543e0 Fixed debugging via Servo PWM pins
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2544 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 18:11:47 +00:00
stac
8223580783 jtag-revb: add eeprom config file
The floss-jtag-revb has an on-board EEPROM which can be used to
hold a serial number.  This greatly simplifies using OpenOCD
debug environments with more than one JTAG attached to the same
PC.

See the FLOSS JTAG revB section of this page for instructions on
how to configure the EEPROM on Linux:
  http://wiki.openpilot.org/display/Doc/Software+Development+on+Linux

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2540 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-23 08:06:13 +00:00
vassilis
b297ef0ae5 Flight/FlightPlanner: First release of openpilot.py library giving access to RTOS and debug fields. Implemented STOP command, this should be the normal way for stopping scripts. The KILL command should be only used as a last resort for misbehaving scripts. The KILL command will delete the VM thread.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2535 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-22 21:32:23 +00:00
stac
2d53902148 UAVObjects-flight: Move generated files into build dir
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2520 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-22 17:38:15 +00:00
peabody124
bcdd87689a OP-295 Modules/SystemMod: Get the internal CPU temperature sensor and store in
system stats when available

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2511 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 17:18:24 +00:00
peabody124
65e02eeb25 OP-293 PIOS/ADC: Fixed issue with DMA engine and odd numbers of channels not
accounting for the fact they are transferred in pairs when using ADC2

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2510 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 17:18:20 +00:00
pip
7bcdcee5ad Capitalised #define values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2507 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 16:48:03 +00:00
pip
500a199a70 Added deg_to_rad & rad_to_deg to help understanding calculations.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2501 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 10:52:41 +00:00
peabody124
2d9f7f32d1 OP-291 PiOS/Servo: Converting output to use driver system
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2499 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-21 03:40:21 +00:00
pip
3d2f78ae9a Removed pipx entries
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2498 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-20 23:01:20 +00:00
pip
8b5ae6aef9 Removed PipXtreme entries
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2491 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-20 20:41:43 +00:00
vassilis
3a755826a5 Flight/FlightPlan: Fix build issue with rev 2480
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2485 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-20 02:25:09 +00:00
cwabbott
e73da04cc6 PiOS.win32: changes according to rev 2480, fix compile error in manualcontrol.c, add vTaskDelete() to win32 FreeRTOS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2484 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-19 23:52:11 +00:00
pip
5f87966727 Corrected "mag_data.raw.axis[]" indexing errors
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2482 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-19 15:20:17 +00:00
vassilis
d7fd8a3bcd Flight/FlightPlan: Enable Python VM and test flightplan execution. From now on a Python executable needs to be in the system path as it is used in the Makefile.
A test script is statically linked (will eventually be uploaded by the GCS and stored in the VM), it can be found under: Modules/FlightPlan/flightplans/test.py

To start the script send the FlightPlanControl object with the Start command, to stop send the Stop or Kill commands.

Next release will be the OpenPilot python libraries and access to UAVObjects from the script.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2480 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-19 03:34:01 +00:00
osnwt
780f441ae9 OP-289/Flight: do not use RC input if disconnected. Quick fix until better arming system is designed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2479 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-19 00:01:33 +00:00
FredericG
76420d7972 OP-288 Simplification of ManualControl code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2478 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-18 19:30:50 +00:00
FredericG
9758026d5a Added some comment, made some functions static
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2476 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-18 17:51:29 +00:00
peabody124
56dd0569b8 CC-2 Complimentary filter working on copter contol, nice attitude
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2475 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:43 +00:00
peabody124
cf17569de7 CC-1 Modules/CCAtttitude: Calling the ADXL345 library and getting the accel and
gyro data into attitude raw.  Hardcoded calibration for now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2474 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:40 +00:00
peabody124
18deba48c1 CC-6 PIOS/ADXL345: Helper functions for the ADXL345 chip. Need to add
semaphores for sharing the bus between the flash chip and this though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2473 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:37 +00:00
peabody124
211585c7d7 CC-1 Modules/CCAttitude: Initial reads from accelerometer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2472 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 08:45:34 +00:00
andrew
ce87b8f05a OP-274
Fixed Changing of Debug port baud rate only to occur when debug is enabled
Fixed brief in header file

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2470 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 04:02:37 +00:00
peabody124
21b4e55029 OP-14 OP-16: I2C Improvements
1) Added nack counter monitoring
2) Made timeout for getting semaphore in I2C user space code use the one from
driver and record timeouts.  This does not influence timeouts in the non
FreeRTOS case
3) Remove case block from the error handler so that all bus errors reset the
i2c interface

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2469 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:12 +00:00
peabody124
0e441a20f3 OP-14 OP-16 I2C: When sending STOP signal after NAK, mask interrupts first
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2468 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:08 +00:00
peabody124
8959007a38 Flight/Actuator: Log the longest update of motors in ms, not ms * 10
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2467 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:05 +00:00
peabody124
0d567f4e4b OP-14 I2C: Don't log a NAK as an error and also after NAKs seem to get an event
from the stop bit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2466 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:11:02 +00:00
peabody124
31919241b8 OP-14 I2C: Adding new event to the ignore list
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:10:59 +00:00
peabody124
68536d2fd1 OP-14 I2C: Throw away 0 event in error handler
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2464 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 02:10:56 +00:00
cwabbott
3fe7fa0df4 PyMite: Change posix Makefile to use openpilot_sitl platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2463 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 00:04:16 +00:00
cwabbott
7f8ea5e55a PiOS.win32: updates to get it compiling again.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2462 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-17 00:00:41 +00:00
peabody124
c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 23:00:48 +00:00
edouard
b3ca037308 OP-277 Update all files to use a BOARD_TYPE and BOARD_REVISION scheme through the whole codebase.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2458 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 20:41:55 +00:00
pip
ddaa306248 Removed ADC usage - this appears to fix the pipx serial port problem.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2457 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 19:32:53 +00:00
FredericG
c2613ffa88 Spaces->tab no code change
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2456 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 18:49:27 +00:00
FredericG
3f1ad074df OP-246 Configuring arming/disarming; using field to ManualControlSetting to define which channel is used for arming or to disable arming
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2455 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 18:17:30 +00:00
pip
aedf731c07 Temporary override settings saved in flash.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2453 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 17:40:21 +00:00
peabody124
04a00c7327 OP-269 PIOS/ADC: Change the initialization code to work well when changing
oversampling

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2452 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 16:02:53 +00:00
peabody124
ad7a6e6071 OP-269 PIOS/ADC: Only enable the half and full conversion flag for the double
buffering

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2451 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 16:02:50 +00:00
corvus
75a6b406cd OP-273 - UAVTalk - prevent object update-bursts caused by involuntary synchronization in case of long delays or time-jumps
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2450 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 15:28:49 +00:00
corvus
115a581d7c PiOS.posix: porting some of the recent updates to PiOS.posix - compiles now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2449 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 15:17:57 +00:00
corvus
6c3b887ae4 fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2448 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 11:24:43 +00:00
corvus
bbe013fc82 fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2447 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 11:20:52 +00:00
corvus
b4fdd67b4b fixed line endings - mixed LF and CR+LF present - please keep it to either one of those or my editor gets crazy
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2446 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 11:19:13 +00:00
cwabbott
4181d1de05 PyMite: Oops, delete some autogenerated files that are not needed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2445 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 03:24:43 +00:00
peabody124
0259b6d1f1 OP-269 PIOS/ADC: First part of conversion to driver structures
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2444 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:39 +00:00
peabody124
ab75e8117f OP-265 CC: Getting GPIO lines working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2443 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:34 +00:00
peabody124
d4460aa97f Deleting unused file from svn
Conflicts:

	flight/AHRS/ahrs_adc.c

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2442 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:31 +00:00
peabody124
33f3500e64 CC-3: New module for copter control
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2441 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:27 +00:00
peabody124
81b0c3fdb6 OP-269 PiOS/ADC: Moved AHRS ADC code to PiOS and made all the projects use it
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2440 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 02:45:22 +00:00
cwabbott
24a058c8c7 PyMite: add a new 'openpilot_sitl' platform which allows for stdio to the console and make it the default platform for win32 SiTL.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2436 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-15 17:10:10 +00:00
osnwt
290c9c538f Replace decimal OBJID representation in auto-generated headers by hexadecimal (taking advantage of new UAVObjGenerator). It makes easier to read and compare them with files on SD card. This does not change OBJID values and should be completely transparent.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2434 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-15 17:00:17 +00:00
sambas
f0b161f7b9 Updated my workspace files to support all boards known today
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2432 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 15:45:08 +00:00
zedamota
ad0b3e911d OP-268/PipX Bootloader - Changed Timers for MD device, auto memory space fetching (as per people request ;)). Stripped unused functions to reduce size.
TESTED WORKS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2431 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 15:33:24 +00:00
pip
3d8edce5ee More speed improvement to the AHRS_ADC_downsample_data() function. Removed a bypassable multiple inside the inner loop.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2430 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 12:40:29 +00:00
pip
403c9ea2da Improved AHRS_ADC_downsample_data() efficiency/speed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2429 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 12:31:34 +00:00
peabody124
ad7a4cded0 OP-265 PIOS/USB: Put USB buffer size in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 02:15:19 +00:00
peabody124
4528afe4de Update the makefile to allow compiling the PipX and XCode project
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2427 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:48:50 +00:00
peabody124
94ff276522 OP-265 CC: Tweaking objects included and the memory requirements
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2426 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:49 +00:00
peabody124
8a32d88b10 OP-265 CC: More work to get it running
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:47 +00:00
peabody124
de51286524 OP-266: Rename openpilot.c to coptercontrol.c for CC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2424 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:44 +00:00
peabody124
c59a1ff018 OP-265 OP-266: FreeRTOS configuration per project because of available heap
size (may eventually need to be per revision if we get bigger ram).  Typo in a
the ifdefs to get allow disabling SDCARD

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2423 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:42 +00:00
peabody124
ea851803af OP-266 CopterControl: Continue trying to strip out as much as possible to get
it to fit

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2422 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:39 +00:00
peabody124
f0c36b13a4 PiOS/USART: Use the buffer size defined in the board file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2421 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:37 +00:00
peabody124
7c9b3b3d69 OP-265 AHRS: New file locations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2420 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:34 +00:00
peabody124
2c335edd7f OP-266 CopterControl: For now no USB support for code size
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2419 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:32 +00:00
peabody124
79caad654b CopterControl: Don't need altitude sensor support
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2418 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:30 +00:00
peabody124
9cf3ee9fb3 OP-267 Flight/UAVObjectManager: Make all references to DFS function depend on
PIOS_USD_SDCARD.  However, this needs to be cleaned up and abstracted out of
the UAVObjectManager who shouldn't care about the storage layer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2417 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:27 +00:00
peabody124
940792db5c OP-265 CopterControl: Fork main OpenPilot directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2416 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:24 +00:00
peabody124
fc54159369 OP-265 Flight reorganization of UAVObjects and Modules up a directory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2415 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 01:38:19 +00:00
peabody124
982f2dd8af OP-261 Clean up GuidanceSettings to be more intuitive
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2414 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 00:52:00 +00:00
peabody124
c141b02339 OP-261 Drop PositionPID mode from GuidanceSettings
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2413 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 00:51:57 +00:00
peabody124
aa8d9eb178 OP-261 Magic Waypoint: Accel feedback for position hold
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2412 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-14 00:51:54 +00:00
cwabbott
db9bc06a08 Added support for FlightPlan in win32 SiTL and fixed line endings in Python files,
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2411 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 23:54:30 +00:00
pip
c7ecfd2f60 Fixed pios_board.h to include the pipx .h file
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2407 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:37:01 +00:00
pip
b647d93add Added pipx board file.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2406 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:34:59 +00:00
pip
06c5e9665a removed pios_board.h
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2405 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:22:54 +00:00
pip
13e3d37ef4 Fixed Watchdog compile problems
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2404 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:15:12 +00:00
peabody124
07798bb2db PIOS/WDG: Add back the returned delay for code that wants to clear WDG more
rarely

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2403 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 19:01:33 +00:00
pip
86fc4d2d1c Recovered and added missing file.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2402 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 18:19:15 +00:00
zedamota
691c58a583 OP-268/PipX Bootloader - Changed the size of BL def.
New naming convention for the linker files:
link_(board_name)_(density)_(bl usage).ld

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2401 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 17:34:22 +00:00
zedamota
301d9cddfc OP-268/PipX Bootloader - Trunk integration of Edouard's work.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2399 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 15:57:30 +00:00
zedamota
1f89ee1865 OP-21/Bootloader - Change HW ID to 16bits. Should still be compatible with the old version.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2398 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 14:36:32 +00:00
ligi
2db5d0eb1a removing autogenerated flight/uavobject files with @ref http://forums.openpilot.org/topic/2811-uavtalk-code-generation/
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2396 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 10:22:44 +00:00
pip
df45cb7be8 PipX modem full source code moved into public SVN.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2394 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 08:45:18 +00:00
FredericG
cf71281bf4 OP-241 Fixed small issue with arming timeout + some refactoring of the arming/disarming code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2393 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-13 07:48:46 +00:00
cwabbott
0f965df11e SiTL: Updates for UAVObjects, and for the recent Actuator and Watchdog changes to compile with SiTL. Posix needs to be tested.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2387 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-12 00:39:18 +00:00
pip
a1b03ef55c Added http reference address for source of coeffs and c code for if and when new coeffs are required.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2383 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-11 15:45:16 +00:00
pip
b3d1c1f822 Added a return code test when calling WMM_GetMagVector() function. If returned code is error then don't set home location.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2382 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-11 11:15:27 +00:00
pip
7b50e09eb9 Fixed possible memory leaks. Now check for NULL pointers from all MALLOC calls. Functions now return '0' if OK, otherwise returns a value < 0.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2381 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-11 11:11:23 +00:00
peabody124
d846288cec OP-14 I2C: Remove delay in I2C IRQ handlers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2378 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-11 03:50:23 +00:00
peabody124
5bcdfd6edd OP-239 OP-210 GPS memory usage: Pip catching the memory on the stack in the WMM
means this task only needs 800 bytes (of which only 120 is for the WMM).  Free
heap is now 9k.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2376 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 21:31:31 +00:00
pip
1fbd7155f9 Moved a few large variables off the stack to dynamically allocate them from the heap (http://progress.openpilot.org/browse/OP-225).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2374 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 20:30:47 +00:00
peabody124
2fee1781ec OP-239 OP-210 HomeLocation: This was causing resets on the board due to not
enough memory.  Increase task memory a little.  I'm not sure that it's possible
to make the WMM memory usage less.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2372 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 18:45:16 +00:00
peabody124
3abcfc9608 OP-251 UAVObject/WatchdogStatus: Sorry forgot files earlier for monitoring what
triggered previous watchdog resets

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2369 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 05:42:57 +00:00
peabody124
bbbd9a10e3 OP-14 I2C Diagnostics: Improve the logging so that the events going into FSM
are logged, and separately the erirq and evirq logs are exported

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2368 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 05:42:53 +00:00
peabody124
aae4d113f5 OP-237 Actuator: Woops, typo
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2367 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 01:13:55 +00:00
peabody124
b173d74821 OP-237 I2C ESC support. This _will_ require you to reconfigure your
ActuatorSettings although for PWM aircrafts it should be done exactly as before

Actuator: Store the update times and maximum update time

OP-14 I2C: Start tracking short history of events and states in driver for
logging
OP-237 Flight/Actuator: Support for I2C based ESCs

OP-237 MK_ESC: Send all four motors as one atomic transfer

OP-237 Flight/Actuator: Allow channels to be mapped to MK I2C interface.  Currently
mixer channels are either PWM or MK but in the future this will change to
support more than 8 channels.

OP-16 PiOS/I2C: Further work to try and make I2C more stable, mstly special case
handline in IRQ

OP-237 I2C ESC: Support for Astect 4 channel ESCs

OP-237: When the I2C Actuator write update fails track this

OP-237 Actuator Settings: Change the way motor types are selected to keep that
information more appropriately within ActuatorSettings instead of MixerSettings

Also make motors stay at or above neutral when armed and throttle > 0

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 01:11:44 +00:00
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-10 00:16:30 +00:00
vassilis
1e78cc7a30 Flight/FlightPlan: First release of flight plan scripting. The scripting engine is based on the PyMite Python VM. The released code is able to execute a simple python script on the target. However it is currently disabled from the makefile due to a few issues with more complex scripts. When the library is enabled in the makefile a python interpreter will be needed to compile the firmware since some intermediate code is generated by PyMite.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2364 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 22:36:15 +00:00
peabody124
e393000c34 OP-238 PIOS/SPI: Decrease pin clock rate from 50 to 10 Mhz. Since data at
1.125 MHz this should slow down the slew rates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2361 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:46 +00:00
peabody124
5734e1f437 OP-176 PIOS/ADC: Decrease the priority of the ADC DMA/IRQ
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2360 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:43 +00:00
peabody124
0175e25ddf Flight/ADC: If there is a DMA error for the ADC transfer dont copy those values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2359 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:39 +00:00
peabody124
148ea6fdc1 Flight: Make PWM outputs default to 0 us to avoid either pushing servos to
exteremes or running up motors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2358 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:35 +00:00
peabody124
24c4e92b12 OP-176 FreeRTOS task priorities a bit more sensible
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2357 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:33 +00:00
peabody124
85b7619617 OP-176 OP-238 Flight/IRQ and DMA: Increased the priority of the AHRS DMA
transfer, seems to reduce CRC errors

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2356 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:29 +00:00
peabody124
0f07d7f671 OP-240 OP-176 Flight: Setting the priority group back to 4 (anything higher
priority preempts) and adjusting the priorities around to be more sensible.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 20:49:26 +00:00
vassilis
b851c11f53 Flight/Stack sizes: Reduced task stack sizes to free-up memory in preparation of the scripting release. If the firmware is unstable there might be a possible stack overflow, test carefully!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2350 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-09 00:03:19 +00:00
vassilis
407e660c97 Flight/TaskMonitor: Create TaskMonitor library, used to monitor the remaining task size of all running tasks.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2349 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-08 23:43:34 +00:00
peabody124
d8022a320d OP-238 PiOS/USB: Fix for problem Ed's being see where being plugged into usb
but not having telemetry causes a reset.  If the buffer got full enough it
would never start to transmit again.

Note: also making Telemetry non-blocking

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2346 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-08 08:05:02 +00:00
peabody124
ccc8bc089b OP-235 AHRS: Not sending the out of range values to the mainboard was blocking
calibration.  Now only don't send them to the EKF.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2342 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-06 16:44:40 +00:00
cwabbott
050ade4899 PiOS.win32: UAVObject changes, and double the timer tick length to accommodate the MMCSS-set timer tick and be more in line with PiOS.posix.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2341 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 22:47:47 +00:00
pip
75793a1687 Now using down-sampling on the baro temperature & pressure readings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2338 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 12:19:49 +00:00
pip
572284966d Forgot to add "#ifdef ALT_PRES_MAF" into init code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 11:28:04 +00:00
pip
cb8e9ef07b Added a moving-average-filter to the pressure reading, and increased BMP085 oversampling from 2 to 3
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2336 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 11:26:47 +00:00
peabody124
6eae425644 OP-235 AHRS: Because of range checking at initialization the EKF can be blocked
(which is good) but that stops the comms polling.  This makes it happen
ocassionally but not too much.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2335 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 10:34:48 +00:00
peabody124
77d798071e OP-235 AHRS: Check the downsampled data for either being ridiculously out of
range of NaN.  This would reflect a race condition probably from the SPI
interaction.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2334 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 10:34:45 +00:00
peabody124
0e7661539e OP-238 AHRS Comms: Bring down clock rate of comms to AHRS to 2.25 MHz. Decrease
to only transmitting one object per transmission too to keep size down.
Also move to using the driver structure so the paramter is in a clear place.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2333 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 10:34:42 +00:00
peabody124
3e9ee37c73 Flight/ManualControl: Require the roll signal to only go to 0.90 to arm and
disarm

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2332 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 10:34:39 +00:00
pip
4a91f20277 Turn AHRS orange LED on at bootup (to try and spot possible bootup hangs).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2331 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-05 09:15:37 +00:00
corvus
a59d08b7af AHRS: Support for Linear Temperature Compensation Factors for Gyroscope X,Y,Z
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2327 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-04 00:54:31 +00:00
andrew
af77839747 OP-84
Battery module for Power Sensor version 2
This is the first checkin of code for the new sensor board.
This has been tested for Voltage calibration bit not Current yet.
This will set and clear system alarms appropriately.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2323 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-03 01:23:04 +00:00
corvus
c01676eed2 sim_posix: Makefile: fixed line ending - and added missing UAVObject
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2314 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-31 19:31:55 +00:00
edouard
3bad347386 Reverted a change which caused resets on the MB under certain conditions. Should be back to normal now.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2311 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-30 19:24:57 +00:00
pip
c8a1a6771c Added "AHRS_ADC_GetOverSampling" function
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2308 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-29 10:34:48 +00:00
sambas
0b2a0884ae OP-22 Flight/PiOS: Spektrum improvements, removed my zero throttle glitch
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 18:37:36 +00:00
peabody124
7ccdb296ac AHRS: Add interface to get old dump_raw function working for Pip
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2305 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 17:48:45 +00:00
andrew
c396279a37 Preparing Battery module for Power Sensor version 2
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2304 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 05:46:14 +00:00
andrew
eda227ec8b Added BatterySettings UAVObject in preparation for updates to PowerSensor code.
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2303 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 05:13:19 +00:00
andrew
76be2b991b Update to FlightBatteryState UAVObject in preparation for updates to PowerSensor code.
As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 04:28:39 +00:00
andrew
2f38fe2269 Updated Alarms.c Modified flight alarm code to NOT set SystemAlarms to an "Uninitialised" value on startup.
This allows the UAVObjectGenerator generated code to set the default values.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 04:19:41 +00:00
peabody124
2b0c75e46d AHRS: Fix LED flashing light
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2300 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-28 02:10:52 +00:00
andrew
bdb2982ca5 Added alarm processing for GPS module.
Error when GPS disconnected
  OK when >=7 satellites and PDOP <3.5
  Warning when only 3Dfix
  Critical otherwise

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 19:59:43 +00:00
pip
26650724e4 Fixed coding error on line 317 .. changed while (xxx & xxxx) to while (xxx && xxxx)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 09:48:11 +00:00
andrew
e7e0f6740b Modified flight alarm code to set SystemAlarms to an "Uninitialised" value on startup.
This means that any defined alarms that don't have their flight module compiled in will show uninitialised rather than OK

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2295 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 07:30:36 +00:00
andrew
39cb30d56f Update to SystemAlarms UAVObject.
Added:
Battery
Flight Time
I2C
GPS
Also added new alarm state of "Uninitialised"

no code to set these alarms yet.

As this changes UAVObjects both flight and GCS software will need to be recompiled to stay in sync.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2294 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-27 07:25:52 +00:00
peabody124
c364f45fb7 AHRS: If using mags then don't initialize until get a good mag update within
250 ms of init call (mag works at 10 Hz).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-26 18:59:32 +00:00
peabody124
343b4095a3 Flight/WMM: Get rid of date structure and keep it on stack. Also don't need
error message for embedded stuff.

Note: this was only tested on PC although I'm fairly confident about it.
Please let me know about any errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2285 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 21:57:15 +00:00
peabody124
b8476bea20 WMM: Memory reduction, variables computes from flash constants on fly. This
will run slower but greatly reduce the memory footprint (360 floats less).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2284 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 21:57:12 +00:00
peabody124
35bc1e7d9b Flight/AHRS: Make the mag raw data always update regardless of home location
settings but only be used when home location is valid.  Also discard any mag
data that is all zeros although we shouldn't see this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 20:21:22 +00:00
peabody124
314a2fcf00 flight/AHRS: Make the 13 state INS default again, the accel bias drift can be a
little aggressive.  Also increased the drift rate of the gyro bias per Sambas'
testing (thanks) although not to the levels required for flying through 40 deg
C transitions.

Made the dump_ekf function handle both numbers of states

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2282 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 19:38:54 +00:00
peabody124
7ab6dfeeba PiOS/USB_HID: Lower priority of USB interrupt
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2280 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:16:07 +00:00
peabody124
1142b1fb1e PiOS/USB_HID: No longer clear buffer after getting a NAK. This was required
before because if transmission got NAK then sending would stop.  Now the next
time data is added to the buffer a new send will be attempted.

fifoBuf: in clearData just set the read pointer to the write pointer.  This is
safer for multiple people accessing it assuming the reader will be clearing it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2279 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:16:04 +00:00
peabody124
ba8351f60a PiOS/USB_HID: When using FreeRTOS use a sempahore to stop multiple tasks
pushing data to the transmit buffer

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-24 17:15:59 +00:00
pip
d072c30ba1 Settings additions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2274 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-22 22:16:44 +00:00
cwabbott
7715a6d6cd PiOS.win32: Add MMCSS support for Vista onward, and smarter priority boosting to XP. Also, add the Actuator module and the fake pios_servo.c. If you run this using Windows 7 or Vista, then you need to run OpenPilot.exe as administrator once to set up the registry.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2270 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-22 14:47:42 +00:00
zedamota
14ef24a3de OP-21/Bootloader - Maximize flash space available for user code. Bring back delay on HID send (board->pc) it still hangs when blasted with data. AHRS is now Readable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2263 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-21 17:25:24 +00:00
edouard
d8edab8371 Added a (fake) pios_servo module in PiOS.posix, this makes it possible to compile the Actuator module and see servo output values, or at least
what they would be on a real board. Also fixed a typo in stabilization.c which made me lose time when trying to understand the code...




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2260 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-20 16:38:17 +00:00
osnwt
801568269c 2251 rev changes reverted. Let someone change UAVObjects to provide calibrated altitude and/or offset to HomeLocation and/or take off location (which can be quite different including elevation). But please do not forget that many of users do not have the GCS with Internet at field and/or do not have sufficient weather/baro/altitude condition info for their country. So the solution should provide also a way to 'drive-power-launch'.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2259 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-20 05:20:06 +00:00
corvus
1aa6a206db Sim_Posix: Updated Makefile to include some recently changed/new UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2253 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-19 11:29:24 +00:00
osnwt
7d084aca49 Added power-up barometric altitude calibration. Height accuracy is not sufficient, for better results we may want some filtering and/or another sensor/ADC. But at least now the BaroAltitude.Altitude object provides meaningful data comparing to uncalibrated zero height.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2251 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 23:40:17 +00:00
zedamota
7f00e88321 OP-21/Bootloader - House cleaning only, shouldn't brake anything.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2250 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 20:41:13 +00:00
cwabbott
0b985b2168 PiOS.win32: Various fixes to get it working again, added a sim_win32 option to the main makefile.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2249 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 18:41:37 +00:00
pip
e84b222272 PipX modem settings update .. note that they do not yet function.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2248 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 13:54:35 +00:00
peabody124
ac24d86f40 AHRS Makefile: PT accidentially turned on DEBUG=YES when checking in
FirmwareIAP to get me back for breaking Sys_Reset.  You got me! :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 08:56:12 +00:00
peabody124
f010502229 PiOS/I2C: Was throwing out repeated byte transmitted events but this is
required for longer sequences,  Need to deal with when it happens
inappropriately better.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2245 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 07:09:34 +00:00
peabody124
af99c31a61 PiOS/I2C: Fixed typo and also the values for I2C Diagnostics when disabled.
Enabled by default though.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2243 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-18 07:09:28 +00:00
zedamota
917f03121d Fixes a problem with the reset function introduced on the new ST libs migration, it was preventing the user space reset used with the bootloader to function properly.
I think someone still likes to honor his avatar :)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-17 14:16:58 +00:00
peabody124
4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are
sometimes thrown, and made errors not lock it up by default.  It works for me,
but since this has historically been associated with lots of lock ups please
check your systems carefully.

PiOS/I2C: Make the bus by default try to recover from errors instead of locking
up

PiOS/I2C: After a bus error and clocking all previous data create a STOP
condition to make sure bus is released (note, this also requires creating a
START condition first)

PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard
second one, there is no situation where we should get the same event multiple
times that matters and this gets us out really quickly to catch the real
events.  I was seeing this with repeated 0x70084 which means byte transmitted.
This is related to STM32 bugs in the IRQ timings I believe.

PiOS/I2C: 1) Mask out some bits we don't care about in the event flags
2) Don't lock up if the give semaphore fails, although why it does is strange
3) Recover from bus failure through the "auto" state path instead of just
coding state

PiOS/I2C: Change the reset bus code to follow
http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf
(thanks for the reference Neontangerine).  Although this may actually NOT clear
the bus the first time through, subsequent bus errors should eventually clock
it out.  The up side is it is less likely to clock a bunch of 1s into an ESC
and make it run up.

PiOS/I2C: Some cleaned up code for getting a snippet of the history when
something strange happens

PiOS/I2C: Export logging information from I2C through a UAV object

PiOS/I2C: Improve the diagnostic information

PiOS/I2C: Need to handle the event 0x30084.  This seems to happen between a
byte transmitted and new byte started

PiOS/I2C: Handle the NACK condition by simply going to the stopping state.

PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK
following the STM documentation.  Other error conditions still are not dealt
with.

PiOS/I2C: Should handle the NACK condition from all the write cases.  Need to
think about read cases

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-17 07:01:58 +00:00
zedamota
c034a35d2c OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-15 19:06:28 +00:00
peabody124
08e888ac8c Bootloader: Don't make it hang in bootloader by default. That's mean PT!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2236 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-14 01:59:15 +00:00
peabody124
36ea75bc0d Flight/HID: Change how the HID code handles the transmit buffer getting empty
and starting transmission again.  This should address the bootloader locking up
on verify.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-14 01:43:16 +00:00
edouard
4be34fdb0f Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7.
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 23:54:30 +00:00
peabody124
68c656a724 AHRS: Add back the old 13 state INS if wanted and also code for tracking accel
bias as gravity vector facing down (bad for planes) which is diabled by
default.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2232 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 15:15:50 +00:00
peabody124
1086a6b567 Flight: Changes to STM library to work with our code. Basically all the
configuration structures are const which keeps them in flash instead of ram.
However the library needs to declare them const for the compiler to work.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2231 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:28 +00:00
peabody124
18858571ce Flight: Updated to the latest StdPeriph libraries
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2230 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:24 +00:00
peabody124
9250470c98 Guidance: In velocity control use maximum groundspeed to cap the velocity
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2229 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 07:03:04 +00:00
pip
9ceda82fba Updated UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2227 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-12 18:26:51 +00:00
pip
d5f6504aa2 Updated UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2224 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-12 18:16:24 +00:00
pip
b4e4d4ed5e Adding PipX modem settings/status UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2219 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-11 10:56:42 +00:00
pip
8b2e1c32d7 Adding PipX modem settings/status UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2218 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-11 10:56:33 +00:00
peabody124
f30aa1d719 AHRS Comms: Send FirmwareIAP object to AHRS so that it can be remotely
rebooted.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2214 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-10 21:03:29 +00:00
zedamota
cc5a4c2bb9 OP-21/Bootloader - NOT FUNCTIONAL
Implements RS232(Telemetry) uploads using Kokomo's protocol.
This is a test version, the code will never timeout and jump to user space code.
If USB is connected on Power Up it will be used, if not RS232 will be used instead.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2211 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-10 19:11:29 +00:00
peabody124
fd10c6ffff Guidance: Small sign error
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2209 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-10 17:14:35 +00:00
peabody124
d218e18ded AHRS: Make arm timeout of 0 disable feature for planes. Don't want them arming
out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-08 20:07:34 +00:00
pip
5e91f46633 Added more telemetry baudrate options
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2198 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-06 08:31:24 +00:00
pip
49e99ea180 Added more telemetry baudrate options
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2195 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-06 08:23:20 +00:00
peabody124
e6a21977f1 OP-156 AHRS: Make the account for the fact the analog data is downsampled two
times for each EKF update

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2193 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 18:13:08 +00:00
peabody124
4e8c6588b6 OP-156 AHRS: Run the accel data through a fifo so it can output raw data faster
than the ekf runs and also be more tolerant of timing jitter

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2191 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:29 +00:00
peabody124
45e3ed27a7 OP-156 AHRS_ADC: Make the ADC system use a callback to better separate ADC code
from the AHRS code (which will facilitate code integration with new INS) and
also will help set up a fifo queue for the downsampled data to allow gyro data
output from AHRS faster than EKF output.  Also decreased ADC interrupt priority
so the SPI comms don't drop out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2190 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:27 +00:00
peabody124
6f1e7b4e41 AHRS: Add a configuration to export the sensor data either with or without INS
bias correction.  This is useful for stabilization to get rid of the gyro bias.
Making it an option is important for calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:25 +00:00
peabody124
81b2f88e75 AHRS: Swap to new code which tracks accel_bias and export the accelerometer
bias

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2188 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:22 +00:00
peabody124
e861bcb9d0 Flight/Guidance: Convert PositionPID mode to PositionPI + Velocity feedback.
Needs AHRS with accel_bias estimation to behave well.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2187 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:19 +00:00
peabody124
0679e8d472 AHRS: In indoor mode correct with a high variance 0 for position to keep it
bounded.  Velocity variance still comes from AHRSCalibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2186 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:18 +00:00
peabody124
a04e33ccc6 OP-192 Flight/ManualControl: Add an ArmedTimeout field to the
ManualControlSettings so that planes can disable the timeout
feature for gliding (holding roll on a plane not so good).

Note: This will require you to reconfigure your ManualControlSettings

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2185 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-04 17:34:16 +00:00
dschin
f99eb5b0c7 No changes to mainline code.
Three files added to  AHRS which add accelerometer biases (16 states) to the INS/GPS.  Added for evaluation (give it a try James).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2182 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-02 02:39:01 +00:00
peabody124
4f21bee0d7 OP-192 Flight/ManualControl: Correctly convert to ms in timeout code so system
will automatically disarm after 30 seconds without motor.  This behavior will
need to be parameterized for planes which might idle for a while.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2181 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-01 22:12:01 +00:00
dschin
18809ce3dc AHRS - fixed time constant of baro altitude offset filter, added the offset to the EKF dump
Added new EKF data parser (m-file) to ground



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2178 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-29 23:28:38 +00:00
peabody124
74249f8e41 OP-171 AHRS: I was flipping sign of baro when putting into INS but shouldn't
have been.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2175 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-29 08:44:43 +00:00
peabody124
f51a5a824e AHRS: Export the bias drift corrected gyro values to OP so stabilization see
more accurate roll rates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2174 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-29 08:44:41 +00:00
pip
0cae6df8b0 Aligned fifo buffers to 32-bit for possible speed improvement.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-28 11:06:45 +00:00
pip
d4c24de556 Updated to use the new fifo_init function
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-28 11:00:20 +00:00
pip
912ba59cf9 You now supply a buffer address and buffer size when initializing the fifo buffer.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-28 10:59:24 +00:00
andrew
c94c76ce40 Minor change to give back manual control to an axis when it is set to stabilization = None
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-27 04:03:37 +00:00
edouard
b840c5ec40 Update ActuatorSettings to remove obsolete fields.
YOU WILL NEED TO RECONFIGURE YOUR ACTUATORS!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 20:55:05 +00:00
peabody124
75363896fb AHRS: In outdoor mode when no GPS for a few seconds start updating with zero
velocity to help stabilize attitude.  In principle the mag should be fine but
in practice I need this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:14 +00:00
peabody124
b3251e2cfb AHRS: Accidentally was using mags when in indoor_nomag mode
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2159 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:13 +00:00
peabody124
6a33043297 AHRS: Tweak setting when mag is used to allow greater error in vector length
and start using from power up

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2158 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:12 +00:00
peabody124
e3d2645dea AHRS: Small bug in the conditions for using the mag
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:10 +00:00
peabody124
ebcb272da6 AHRS: Add a separate parameter for velocity and position variance and remove
indoor from the name since it's used for both indoor and outdoor mode now.
Increased default value to 0.4 to better reflect the GPS accuracy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:08 +00:00
peabody124
ac734d5f65 AHRS: Move structure definitions out of main code. Organized variable scopes
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:06 +00:00
peabody124
44069e64bc AHRS: Separated out code for debugging output from the main code and cleaned up
how various sensors are used in the INS update.  Also added slow filter to
track offset between GPS and baro in outdoor mode.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:04 +00:00
peabody124
444dd5c311 AHRS: Split various update modes into individual functions
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2153 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-26 15:57:03 +00:00
dschin
b2a538375c Changes in files supporting AHRS for new initialization methods.
Changes in ahrs.c for new initialization and to fix issues with outdoor algorithm.  The changes in ahrs.c are pretty messy, but committed mostly to get the code to Peabody for more extensive restructuring of ahrs.c.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2150 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-24 01:27:43 +00:00
peabody124
cfbdad5e0d Flight/USB_HID: Change to deal with buffer filling up when GCS not ACK'ing the
usb transmissions.  Clear TX buffer after any NAK.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2147 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 19:29:10 +00:00
peabody124
88a0ede73b OP-203: Flight/AHRS: Add fifo_buffer dependency for pios_usart
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2146 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 18:19:58 +00:00
peabody124
8ea727d10c AHRS/Makefile: Remove trailing CR
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2145 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 18:19:56 +00:00
peabody124
e89911bb8a OP-203 PIOS_USART: Don't disable interrupts for receive buffer since
only one receive task.  This is less generally safe but decreases the
frequency of resets in our current configuration

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2144 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:49 +00:00
peabody124
a454f06bf8 OP-203 PIOS_UART: Tweaked the way the interrupts are reenabled to get comms
stable again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2143 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:48 +00:00
peabody124
300a3bc8ad OP-203 PIOS_USART: Get TX buffer using fifo_buffer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2142 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:46 +00:00
peabody124
e3dd542609 OP-203 PIOS_USART: Make USART Rx code use fifo_buffer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2141 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:44 +00:00
peabody124
d2b468d661 Flight/Stabilization: Need to either set or clear the alarm, but the way it was
before cleared at the end of each loop - including one after an alarm

Flight/Actuator: Similar change to make sure not having updates from
stabilization (i.e. no AHRS) doesn't trigger a watchdog reset

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2140 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-23 17:13:42 +00:00
zedamota
d57441e8f4 OP-21/Bootloader - forgot to commit this too..sorry (check last commit)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2137 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 22:58:14 +00:00
zedamota
98b0f406dc OP-21/Bootloader - fixes GPS connected issues, enhances timings problems, further work on serial support
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2136 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 19:37:40 +00:00
osnwt
ed49f7fc40 Prevent some compiler warnings treated as errors during RELEASE build (possible use of uninitialized variables - CodeSourcery under Windows build system). It may be done with some #pragma as well, but this way is more portable.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2132 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-21 13:09:05 +00:00
cwabbott
2dde28843b PiOS/win32: UAVObject fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2114 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-13 15:46:37 +00:00
peabody124
54aa09ce27 OP-163 Flight/Guidance: Take current position as desired position
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2111 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 16:57:16 +00:00
peabody124
6ebc8ccd57 OP-163 Flight/Guidance: Add variations on position hold to try out. Only one will end
up in the final code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2110 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 16:57:13 +00:00
peabody124
5850c1804d OP-199 Flight/Stabilization: Increment a counter in actuatorDesired whenever an
update takes longer than 15 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2109 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-12 04:36:04 +00:00
sambas
c74c9cc08e OP-73 Flight/PiOS: deinits started, still just for review
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2107 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-11 20:38:44 +00:00
sambas
f94dc41712 OP-73 Flight/PiOS: runtime RC input change, initial files just for review, not integrated to build yet
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-11 19:09:39 +00:00
corvus
bb1b6d8b8d sim_posix: added missing UAVobject source file to Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-06 15:33:54 +00:00
peabody124
834eecfc1f OP-200 Flight/Watchdog: Have flag that is set from actuator, ahrs_comms, manual
and stabilization that is monitored by watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2078 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-05 14:28:21 +00:00
peabody124
f950b9f6c0 Flight/ManualControl: Make it so the disarmed signal itself changes when GCS
lost.  Warning though: it takes ~5-10 seconds for the flight telemetry status
to go from connected so this solution still isn't great.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:53 +00:00
peabody124
7bdd900409 Flight/Manual: Cleaner solution to deal with timer wraparound
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:51 +00:00
peabody124
1f87715719 OP-192 Flight/ManualControl: Add a timeout to the armed signal. Leaving throttle < 0
for 30 seconds disables it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:49 +00:00
peabody124
c69c4157f1 Flight/Actuator: Add failsafe for when flying via GCS to disarm at
lost connection

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-04 02:30:47 +00:00
corvus
ba781dec9a port.c optimized for linux
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2051 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-11-01 11:54:02 +00:00
pip
9b22bb07e6 Fixed a bad bug in the fifo_getData functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2044 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-31 04:58:34 +00:00
edouard
d5752dff34 Update BL Makefile for buffer.c removal.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2043 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 18:39:07 +00:00
peabody124
800e6cbe2c AHRS/INSGPS: Fix a swapped index Corvus caught
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2042 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 18:15:57 +00:00
peabody124
34bd4b7524 OP-198 Flight/GPS: Remove dependency on buffer.c, also made the detection of start and
end characters occur while sentence coming in instead of reprocessing whole
sentence for each character

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2041 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 18:15:52 +00:00
pip
ed03a45ee5 Added extra error checking - making sure the packet size is valid and that packet sizes match.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2039 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-30 15:00:36 +00:00
edouard
8087fda6f9 Update Makefile so that the bootloader still compiles with the latest buffer_XXX changes...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2032 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-29 17:54:05 +00:00
pip
7bdaaa3930 Renamed fifoBuf_size to fifoBuf_getSize and got it to return the actual usable size of the buffer (one less than the buffer size).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2031 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 21:10:43 +00:00
pip
91e6fb1485 Added fifoBuf_size function
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2030 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 15:14:44 +00:00
peabody124
42a02e5662 Flight/HID: USB priority to 8 instead of 1. Probably Need to make the HID layer use a
similar driver format to the PIOS_USART system.  (p.s. are you happy now, PT?)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2029 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 15:07:07 +00:00
sambas
3f62776253 OP-97 flight/GPS: Few more fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2028 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:58:39 +00:00
peabody124
b9f74a86c3 OP-198 Flight/Libraries: Swap to using circular buffer code from Pip because it
supports thread safe write/read simultaneously

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2027 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:30:03 +00:00
peabody124
0bdaf4d0df OP-197 Flight/USB: Make non-blocking send return -2 instead of -1 for not enough space
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2026 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 14:30:00 +00:00
sambas
365a2a121a OP-97 flight/GPS: Few fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2025 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-28 13:50:34 +00:00
peabody124
aada18a0ea UAVTalk: Update protcol version number to go with new packet format and changed
a few constants to make it self documenting

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2017 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:41:41 +00:00
peabody124
4570d6df23 UAVTalk: Insert a sync byte (0x3C) and the packet size to facilitating handling
by PipX modems.  This is a change to UAVTalk so GCS and the hardware must all
be updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2016 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:16:29 +00:00
peabody124
33e6cbebdc AHRS debugging: Move dump to beginning of block to see the updated lines
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2015 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 17:16:25 +00:00
sambas
3e462b1434 OP-97 flight/GPS: Disable speed threshold command for those who knows it's needed, check gpsTask->DISABLE_GPS_TRESHOLD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2014 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 15:51:33 +00:00
peabody124
4d7e053e06 AHRS Debugign code for dumping the EKF and importing into Matlab
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 14:31:34 +00:00
peabody124
2019edd612 AHRS: Store running time to make detect resets easier. Update OP and AHRS in
parallel for this update.  Also removed comment for rawhid

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 14:31:32 +00:00
sambas
f1ba558fa1 Flight/GPS: Some updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-27 10:39:38 +00:00
peabody124
a2e0cd2240 Stabilization: Dont make queue respond to both raw sensors and attitude because
causes it to trigger most of the time every 1 ms which is consuming tons of
CPU.  Also lower the failsafe timeout since its likely due to overloading the
event system and we don't want to delay 100 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2005 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:05 +00:00
peabody124
9944cdfcb0 Flight/RateDesired: UAVObject for monitoring the desired rate out of
stabilization for diagnostics

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 20:00:02 +00:00
peabody124
acc6df4c2d Flight/USB_HID: Make the userspace command wait until not in interrupt before
running and block the interrupts while modifying the buffers

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-24 01:35:30 +00:00
ligi
523b6ad8f7 added hint on how to better distinguish FC/NC
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-22 12:36:47 +00:00
peabody124
098b2fd693 Flight/System: Double heart rate when system is armed. This is per request in
IRC, but suggestions are welcome.  In the long run we probably need a sensible
way of embedding some information in the LED but it's not obvious to me.  Also
could have done with callback - sue me. ;)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1997 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:31:24 +00:00
peabody124
cd04845c3d Flight/HID: NAK instead of stall USB bus (former was mistake) and change
polling time to 4 ms

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1996 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-20 05:21:25 +00:00
corvus
50574841bd Moved non primary Stabilization modules into Branches
simple		- outdated - won't compile
Experimental	- outdated - won't compile
les		- development version - not stable
les+corvus	- development version - not stable




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1993 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-19 19:12:37 +00:00
dankers
4ed3359f6f Comment was misleading.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1992 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-19 17:25:07 +00:00
sambas
0384e359ba My working eclipse workspace, atleast for windows
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1991 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-18 19:16:20 +00:00
corvus
8cb04a372f Stabilization: new stabilization variant based on les stabilization module, with several options for coordinate system transformation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1990 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-18 14:46:45 +00:00
corvus
7a37dc1f32 PiOS.posix - added some debugging code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1977 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 16:27:49 +00:00
edouard
82b702e239 Added the new Multirotor shapes to the SystemSettings object, as discussed on the forums. UID has not changed, but you should recompile still (sorry).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1972 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-17 14:15:47 +00:00
corvus
43beec24d6 flight/documentation/Architecture - Updated Architecture diagrams to reflect most of the current UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1966 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 18:05:12 +00:00
les
2125e2479d Added AHRS boot loader SPI protocol
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 17:54:00 +00:00
cwabbott
dff66607c7 More UAVObject fixes, stuff to get PiOS.win32 compiling again.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1962 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-16 12:15:47 +00:00
peabody124
300195ff18 AHRS: A few small changes
1) Moved the criteria for using GPS to defines in anticipation of moving into
AHRSSettings
2) Only use the mags for updates if the vector length is within 20% of nominal
to avoid updating when it's nonsense
3) Reinitialize position when swapping between indoor and outdoor
4) Dont use mags for first 5 seconds after initialization, sometimes seems to
cause issues
5) Dont use mags until magnetic field at your location is set and a magnetic
field is loaded
6) Dont use GPS if home location hasnt been set

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1959 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-14 01:36:30 +00:00
peabody124
016bcad24a AHRS: Detect when more than 2 seconds since last GPS update and in that case
reinit INSGPS to new location

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1958 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-14 01:36:28 +00:00
pip
bd8ad90301 Added PipXtreme jtag cfg files.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1956 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 08:14:39 +00:00
pip
acadc4bc28 Added some files to the PipXtreme folder.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1955 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 07:49:05 +00:00
pip
a3ac3feae9 Added PipXtreme folder.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1954 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 07:43:32 +00:00
pip
0f7e0cf4db Removed PipBee folder
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1953 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-13 07:40:36 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 17:58:11 +00:00
peabody124
dc10998152 Flight/Stabilization: Make any throttle < 0 reset the pid integral windup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1933 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:06 +00:00
peabody124
5f601bf5ab Flight/Guidance: Enable for any type of quad airframe
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1932 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:04 +00:00
peabody124
e72b6051b5 AHRS: Make mag variance account for the vector length of magnetic field. Also
moved around where the axis are swapped and made the negative sign come from
calibration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1931 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-10 00:46:01 +00:00
peabody124
ea85e98d7a Flight/Stabilization: Move update time storage to before the set to make sure
it goes

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1922 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:28 +00:00
peabody124
8308e4a4fe Whitespace change: get rid of CR
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1921 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:26 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:23 +00:00
peabody124
0a9ab6ca5f AHRS: Send PositionActual and VelocityActual out
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1919 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-08 15:38:19 +00:00
edouard
85aeffed9a Removed example settings from OpenPilot flight SW makefile too..
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1914 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 17:42:59 +00:00
peabody124
c4cb494a22 UAVOBjects: Just ran object genearator to get things compiling again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1913 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 13:09:35 +00:00
kokomojoe
a0b3b47c48 OP-21 Flight/Bootloader - experimental modules implementing a simple serial packet (SSP) protocol. ssp_test is a test framework. ssp is the module, main_ssp.c prototype module on how this could be used in the bootloader, it is not fully functional, additional logic required for start-up detection to decide if serial initialization is required.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1909 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 04:59:18 +00:00
darkz
6b8aba07b1 Updated Makefile.posix to reflect the removal of example code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1907 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-07 02:50:12 +00:00
edouard
5c48c29612 Remove example objects from the flight code, not needed anymore
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1905 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 21:50:57 +00:00
sambas
e32ddd5230 Flight/AHRS: gyrotemp raw actually shows now raw temp
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1903 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 18:14:12 +00:00
peabody124
dea5c91646 AHRSCalibration: Make default values correct now Les extended
uavobjectgenerator to support multiple fields (thanks Les!).  Also
changed default scale on mag to +/-6g

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1899 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:42 +00:00
peabody124
66bf9d53d4 AHRS: Paramaterize the variance used for the indoor algorithm.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1898 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 14:26:40 +00:00
kokomojoe
946283d67e OP-185 Flight - Added FirmwareIAP to the module load list in makefile, added uavobjectsinit.c with firmware IAP init calls
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1896 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 05:30:48 +00:00
kokomojoe
7cf0e9ba31 OP-185 Flight support for firmware IAP object. added the pios_iap.c and firmwareiapobj.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1895 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:58:07 +00:00
kokomojoe
6499da40e3 OP-185 Flight Added init function for PIOS_IAP helper functions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1892 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:07:11 +00:00
kokomojoe
2fe266650f OP-185 Flight - support files for Firmware IAP object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1891 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:06:13 +00:00
kokomojoe
20c6e2292a OP-185 Flight helper functions for the firmware IAP object. Allows setting/clearing of back-up registers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1890 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-06 02:02:37 +00:00
les
7ddb0f6f80 Stabilization: Changed to new switch format. Both position and rate modes work.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1886 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:51:33 +00:00
les
1e26ca11ee Manual control: Added some extra room at throttle zero when detecting a faulty signal
Before, moving your throttle trim slightly could cause ManualControl to think the receiver was not connected

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1885 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:50:03 +00:00
les
b2c81aceee Actuator: Fixed motors not going to min throttle in failsafe.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1884 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-05 14:47:48 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 19:48:09 +00:00
les
3aa72835d6 AHRS comms: Added GPL text
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1876 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 15:29:41 +00:00
peabody124
f03669733b Flight/Guidance: Merge back into one task because memory requirements of a task
exceed CPU requirements of PID.  Also add add lesstabilization UAVObject to Makefile
to fix compile errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1870 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 02:01:34 +00:00
peabody124
d71e9df8c5 Flight/UAVObjects: Add a few files that were missed earlier, and get posix
worlking again

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1869 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-04 02:01:31 +00:00
les
05a85c8c95 New stabilization module based on PI-P algorithm used in FlightOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1864 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:39:23 +00:00
les
dcef777ab0 AHRS SPI comms: Retries were not being tracked correctly
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1863 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:36:20 +00:00
peabody124
e743678d89 AHRS: This fixes the mags, I forgot to normalize the magnetic flux at your
home location.  If you use INSGPS_INDOORS make sure your HomeLocation.Be fields
are correct for your GPS coordinates
http://maps.alfiordalis.com/declination.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1862 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 20:35:22 +00:00
cwabbott
8d1a99ae15 PiOS.win32: Updated PiOS.win32 makefile for recent UAVObject changes, and also updated the experimental stabilization code to comply with recent changes to the simple code. Nobody uses SiTL anymore :( .
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1858 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:59:58 +00:00
les
11cf24a312 Actuator: Fixed uninitialised variables
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1857 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:37:07 +00:00
peabody124
1931c75a4c AHRS: Deal better with DMA errors
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1856 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:36 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings.
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:34 +00:00
peabody124
754200f9cf UAVObjects/Delete old VTOLSettings object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1854 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 18:14:27 +00:00
edouard
eeb5eab177 Flight/Stabilization: fix for -180/+180 yaw transition which caused glitches in the stab module.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1853 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 16:43:10 +00:00
peabody124
840df39b78 AHRS: Export gyro data as deg/s instead of rad/s to match the object label
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1851 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 15:22:09 +00:00
peabody124
9165fb87b2 AHRS: Calibration values were sent but not locked into EKF
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1847 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 04:34:07 +00:00
peabody124
87a822e3f9 AHRS: Add back home location setting north axis
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1846 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-03 04:34:05 +00:00
peabody124
5c9b5f4a99 AHRS: Get calibration working again
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:04 +00:00
peabody124
0c30101f54 AHRS: Made an object setting to allow the downsampling rate to be changed on the
fly (EKF rate up to a limit).  Also, now the algorithm selects if you are
indoor or outdoor as well as if you use a mag indoor (if you do set the z
variance higher than it calibrates to).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1841 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 03:10:01 +00:00
peabody124
104dc165a9 AHRS: Max downsample that doesn't cause huge amounts of drops right now is 20
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1840 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:34 +00:00
peabody124
29b087703b Flight/AHRSComms: Decrease stack size, not needed to be that big. Also made
ActuatorDesired dT in ms like the uavobject indicates

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:32 +00:00
peabody124
6d39d85b8f UAVObjects/AHRSStatus: Remove unused fields
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:29 +00:00
peabody124
2050864e59 UAVObjects/VTOLStatus: Remove unused object. Also added update time to
indicate stabilization loop time.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1837 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:26 +00:00
peabody124
0fd9fda7a6 Flight/AHRS Comms: Whitespace fixes
gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 -hnl -l150

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1836 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:22 +00:00
peabody124
ea3fb03c7f Flight/AHRS Communications: Switch to Les' very nice UAVObject communication
scheme

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-02 02:17:18 +00:00
corvus
62300c9682 flight/Libraries/CoordinateConversion: ECEF2LLA() - Speed up the calculation with a primer coordinate.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1834 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 20:30:34 +00:00
peabody124
2a93f35807 UAVObjects/MixerSettings: Have values as int8, don't need float resolution
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1832 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 20:28:14 +00:00
les
683aa2b480 AHRS: Tidied up calibration sequence
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1831 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 19:41:00 +00:00
les
b2d56ca34c AHRS: Added UAVObject based SPI communication between AHRS and OP.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1830 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 17:31:13 +00:00
les
498f3d0fa6 PIOS SPI: Added a function to detect if the channel is busy
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1829 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 16:52:20 +00:00
edouard
d2c1014e29 Re-enabled yaw stabilization after SystemSettings changed. There might be a lingering issue when the
yaw angle crosses the zero-360 mark, beware.
You can disable yaw stabilization by setting all PID gains to zero for yaw.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1828 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 16:26:43 +00:00
peabody124
d54c6bf0f8 Flight/Actuator: Use dT in seconds. Forgot to change MaxAccel.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1825 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 14:37:03 +00:00
peabody124
0dfdad4fc4 Flight/Actuator: Reset critical alarm
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1824 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 14:09:14 +00:00
peabody124
c076a695ce UAVObjects/ActuatorSettings: Default values are all 1000 now so that an
unconfigured motor can't turn on.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1823 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 13:45:26 +00:00
peabody124
9f4e3906e3 Flight/Actuator: Made it use the detected dT for the feedforward computation
and removed the unused field from actuator settings (old setting time and all
the aircraft specific stuff).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1820 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:33 +00:00
peabody124
2dc40d11a1 Flight/Stabilization: Use the system clock to determine time from previous
update since now drive by events.  This means StabilizationSettings object
changing so write down your settings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1819 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:29 +00:00
peabody124
4461aba6d6 Flight/Stabilization: Move to object event system. Latency from ahrs_comm
update to actuator update now ~0.7 ms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:26 +00:00
peabody124
b9943645e0 Flight/Actuator: Run actuator from queue again, latency well behaved.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1817 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-01 12:33:20 +00:00
peabody124
e2d63cbf19 Flight & Ground/AHRS Calibration: Made variance estimation into a two pass
approach again because ran out of numerical precision for single pass.  Also
made ground force the gyro signs to be correct.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1806 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-30 04:30:29 +00:00
sambas
ee4ca7b93a OP-177 Flight: All alarms fixed, AHRSComms stack size made critical stack alarm, event warning caused by queue that is not used at the moment.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1801 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 19:06:35 +00:00
peabody124
a4e0ee5fdf Flight/Actuator: Move Les' actuator to the active one
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1800 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 18:51:36 +00:00
peabody124
2f6f76d578 Flight/Actuator: Remove old mixer code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1799 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 18:51:34 +00:00
sambas
2d90a80e22 Flight/PiOS: this patch makes dosfs work with both MBR and VBR formats. Backup your SD files in case this messes something!! Testing needed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1798 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 16:29:38 +00:00
peabody124
c95b1e6117 Ground/UAVControl: Working joystick support although currently not configurable
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1794 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-29 03:59:03 +00:00
kokomojoe
6f1f990d85 OP-21 AHRS/Bootloader - Moved start of user code to 0x08002000. Must be used with latest AHRS Bootloader compiled with DEBUG=OFF.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1788 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-28 02:21:48 +00:00
fredericg
f090b4bcf8 OP-174 ET OSD: Fixed build errors due to UABObject changes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 19:56:25 +00:00
peabody124
9b1d258a94 Flight/Les/Actuator: Space->Tab, somehow slipped passed previous patch
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1784 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 17:30:42 +00:00
peabody124
aa42256ad1 Flight/Stabilization: Convert all PID loops to units of seconds instead of ms.
THIS MEANS YOU MUST RETUNE YOUR PID LOOP IF YOU'RE FLYING WITH IT

Alternatively divide Kd by 1000 and multiply Ki by 1000

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1782 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 09:04:43 +00:00
peabody124
fef8cca5b6 Flight/Posix: Get compiling again (sorry Corvus, I think I messed up your
change earlier)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1778 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:48 +00:00
peabody124
3c021c09d9 Flight/PiOS: Whitespace changes
find ./flight/PiOS/inc/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{}
bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1
-il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1777 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:45 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:34 +00:00
peabody124
b85e322206 Flight/FlightSituation: Remove unused module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1774 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-27 07:28:21 +00:00
peabody124
da583e0914 Flight/Guidance: Disable by default
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1768 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:07:40 +00:00
peabody124
6d811cc4db OP-140 AHRS: Don't run INSGPS until OP says board is initialized. This will
also block heart beat.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1767 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:57 +00:00
peabody124
8475a68958 Flight/Stabilization: Keep command and error in deg/s for rate stabilization
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1766 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:54 +00:00
peabody124
a3ea9a5461 AHRS: Add a weak mag correction in indoor mode to remove gyro bias and try and
get a reliable heading

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1765 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:51 +00:00
peabody124
77b68e5169 Flight/Guidance: Initial template for guidance module
Flight: Create PositionDesired (the active waypoint) UAVObject and make the FlightSituationActual no update since it not used.
Flight: New velocity desired object that passes information between the look computing the desired velocity and the PID loop to get it (updated at different rates)
UAVObjects/PositionActual: Remove unused GPS fields
UAVObjects/PositionActual VelocityActual: Split the velocity into a separate object.  ALso make sure all the information telemetered around is in cm to avoid using floats.
UAVObject/GuidanceSettings: New guidance settings object for the guidance module
Flight/Posix: Add the new objects to the Posix sim
Flight/Guidance: Computes a desired velocity based on position error than runs a PID loop to control roll and pitch to achieve that velocity.  All distances are in cm, and updated the PositionActual fields to reflect this and use int32.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 03:06:27 +00:00
kokomojoe
ca4f3b53fa OP-21/Flight Bootloader - added compiler and linker options to remove unused functions. Code is now smaller.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 02:34:04 +00:00
zedamota
9b05282be5 OP-21/Flight Bootloader - should make things cross platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 00:39:01 +00:00
zedamota
0371808099 OP-21/Flight Bootloader - should make things cross platform.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-26 00:36:42 +00:00
peabody124
a01783b2a8 OP-140 AHRS: Explicilty deal with if it is initialized or not, use that to
determine retransmitting calibration, home location and such.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 21:05:38 +00:00
peabody124
9b28f2d72c OP-167 OP-157 AHRS/Calibration: Added mag scale and really cleaned up calibration.
Calibration should take less time now too (using second moments to estimate
variance in one pass).  Now need to change to multiple messages to get the
calibration in to keep the request message size minimal.  Also currently
running sensor calibrate doesn't store the gyro bias so if you want to use this
you'll have to tweak it manually.  I'll fix that step tomorrow.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1741 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-25 09:20:38 +00:00
edouard
eedf85a5ac OP-138 Start of the new Mixer configuration interface, for fixed wing only. This does not work yet, takes a long time to fully implement.
The system settings UAVObject is updated, you will have to recompile your firmware. If you want to take a look and let me know, please do!



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1737 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 20:39:37 +00:00
zedamota
095cbb4dd5 OP-21/Flight Bootloader - Now pulls SS pin low again if no AHRS is found.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1733 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-24 15:46:59 +00:00
corvus
1472b342c1 1.0 Featur Freeze -
Removing some Experimental and Incomplete Modules and their UAVObjects not suited for 1.0
- they will be moved into an experimental branch:

Navigation     : experimental code only
FlightSituation: experimental code only 
Guidance       : preliminary draft - possibly to be replaced by peabody124 position hold code if finished in time.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1729 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-23 22:05:03 +00:00
corvus
e44045f422 OP-165 : Guidance Module
Creating GuidanceModule together with PositionDesired UAVObject (as discussed),
so dschin and me can work on it :-)
Will compile and (on sim_posix) execute, but PID logic is yet untested and preliminary.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1722 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-22 22:16:48 +00:00
les
ef7ee86d45 Mixer: zero throttle shuts off motors and changed MixernMatrix to MixernVector
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1710 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:31:17 +00:00
peabody124
a1a3b0774f Flight/AHRS: Update code to coding conventions.
find ./flight/AHRS/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1707 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:29:39 +00:00
peabody124
833e8428d2 Flight/Libraries: Updated to coding conventions
find ./flight/Libraries/ \! \( -name '*~' -a -prune \) -type f    | xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss -ncs -cp1 -il0 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1706 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 19:29:35 +00:00
chebuzz
862e35def1 OP/PiOS.posix - Somebody added UAVObjects but did not add them to the posix sim
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1702 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 14:16:14 +00:00
peabody124
f96654ace1 Adding mixerstatus/mixersetting uavobject files that were missed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1701 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-21 07:08:51 +00:00
les
875437f483 Added matrix based actuator mixing. Note the makefile is set to use the original actuator code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1698 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 19:27:08 +00:00
sambas
24840b461d OP-22 Flight/PiOS: added failsafe and recovery "watchdog" timer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1697 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 18:00:31 +00:00
zedamota
5fb45f835e OP-21/Flight Bootloader - Bug fix, 1 more
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1696 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 17:09:06 +00:00
zedamota
87dc0908ce OP-21/Flight Bootloader - Bug fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1695 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-20 16:29:34 +00:00
zedamota
3ba6372dc4 OP-21/Flight Bootloader - Clean up and linker files for the AHRS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1691 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-19 18:27:53 +00:00
zedamota
128df749f0 OP-21/Flight Bootloader - small bug fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1683 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 23:38:45 +00:00
zedamota
c9752a6a3a OP-21/Flight Bootloader - some changes for the bootloader to work
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1682 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 23:11:42 +00:00
zedamota
1b9811aa0e OP-21/Flight Bootloader - AHRS programming fully working
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1681 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 23:10:26 +00:00
zedamota
97b44ffb04 OP-21/Flight Bootloader - Various fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1678 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 00:46:34 +00:00
peabody124
11f2b1a8dc Flight/Stabilization: Dont cap error at maximum stabilization value - that is to scale control throws. Create another variable if we want this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1676 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:15:02 +00:00
peabody124
0ea95fbad1 AHRS: Separate covariance prediction from state prediction to get updated state out of spi a few milliseconds sooner.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1675 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:15:00 +00:00
peabody124
92c36114f3 AHRS: No longer reinit after a comms glitch. Allow time for EKF to converge (2-3 seconds) after power up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1674 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:14:20 +00:00
peabody124
8e0c5136c0 AHRS/Comms: Make the polling delay 1ms instead of 20ms to make sure if a message isn't ready we don't pause for a long time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1673 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 18:12:25 +00:00
andrew
da1a762072 Added basic code for Yaw stabilisation in manual mode for Helis.
This is functionally the same as having a heading hold gyro in hardware.
Code is copied from the simple stabilisation routine and is a bit rough at the minute, but initial testing looks good.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1670 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 05:52:34 +00:00
peabody124
41b7a99883 Flight/Stabilization: Yaw rate stabilization error should be normalized by dt
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1669 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-17 02:00:55 +00:00
peabody124
a6ca5b82e7 OP-155 Flight/HID: Make the HID stall when buffer full. Not sure the consequences on ground (i.e. if it handles the stall correctly)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1665 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 20:23:02 +00:00
zedamota
e8d6e7c557 Flight - Centralized board specific files, BL and User FW uses the same board definitions, no need to have 2.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1663 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 19:19:38 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 15:41:08 +00:00
peabody124
110c46216e OP-155 Flight: Increase the pios_com buffer size to support these larger objects. If this gets worse and we don't want to use as much OP memory we can make it stall the USB bus when the buffer is full.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1657 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:57:03 +00:00
peabody124
832b61ab86 OP-117 AHRS: Binary streaming of the raw data within EKF. Doesn't keep up while running this but does give accurate data that went into algorithm. Once we can dynamically change sampling rate will be good.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1655 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:26:14 +00:00
peabody124
0b8756d55c OP-148 AHRS/Comms: For now don't retransmit calibration after comms glitch as this re-zeros gyro bias and makes attitude stutter. Need to explicitly communicate when comms glitches and query if AHRS actually rebooted.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1654 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 05:26:12 +00:00
peabody124
885c966e53 AHRS: Added a tracker for number of ADC updates the EKF misses. Also updated the Telemetry autogenerated files to accomodate the 11500 baud rate.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 02:59:00 +00:00
peabody124
ff1b303083 AHRS: Only do EKF correction with mag when new data available
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1651 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 02:58:56 +00:00
peabody124
19e80da928 AHRS: Update UAVObject with information about AHRS rate
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1650 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-16 01:54:21 +00:00
zedamota
4d0d865c31 OP-21/Flight Bootloader - fix to paths
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1647 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 18:03:52 +00:00
pip
82be9117d6 Added USART baudrate defines into pios_board.h & '#if defined's into pios_board.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1646 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:37:50 +00:00
pip
d2bc126e68 Added PIOS_COM_AUX_BAUDRATE to pios_board.h & '#if defined' to pios_board.c for easier baudrate setting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1645 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:33:00 +00:00
pip
73c8194acc Added PIOS_COM_TELEM_BAUDRATE, PIOS_COM_GPS_BAUDRATE, PIOS_COM_AUX_BAUDRATE & PIOS_COM_SPEKTRUM_BAUDRATE defines in pios_board.h with '#if defines' in pios_board.c for easier baudrate changing.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1644 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:18:38 +00:00
zedamota
3e89e388fa OP-21/Flight Bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1643 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:09:27 +00:00
zedamota
c72a5b1cfe OP-21/Flight Bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1642 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:08:24 +00:00
zedamota
f972b78bfb OP-21/Flight Bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1641 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:07:43 +00:00
pip
cf864225fe Added easier to find USART baudrate setting PIOS_USART_BAUDRATE.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1640 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:07:37 +00:00
zedamota
50b7931a1c OP-21/Flight Bootloader - new bootloaders
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1639 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:06:51 +00:00
pip
89fb0b8582 Made pios_hmc5843_data_ready volatile (accessed by both interrupts and main exec loop).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1638 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:00:36 +00:00
zedamota
df88140f51 OP-21/Flight Bootloader - Remove deprecated bootloaders
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1637 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 16:58:00 +00:00
stac
1017d0294b ahrs: always enable -g for gdb debug symbols
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1635 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 15:45:41 +00:00
stac
7886a617dc Revert "ahrs: No longer support -O0 since it doesn't fit"
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1634 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 15:45:39 +00:00
pip
22b9b2512e Added a 115200 baud telemetry option to the OP main board/UAVTalk.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1632 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:43:42 +00:00
stac
73787f7f15 ahrs: No longer support -O0 since it doesn't fit
Leaving debug on allows the -g option to be enabled
so that we can have symbols in gdb even though we're
forcing the optimization flags to -Os.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1631 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:06 +00:00
stac
cdb8aa37a0 ahrs: Only read mag data when it has been updated
The AHRS mainloop was reading the mag data on every
loop regardless of whether new data was actually
available.  Now that the MAG_DRDY signal is monitored,
we can read only at the rate (10Hz) new data is actually
produced by the sensor.

This also enables future improvements that will remove the
filtering work that is still being done on the mag data on
every iteration.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1630 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:05 +00:00
stac
55d90970ed hmc5843: hide internal #defines and functions
Way too much was being exposed in the API for the
HMC5843.  This commit properly hides internal
details of the driver.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1629 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:04 +00:00
stac
0e7a801e9e hmc5843: Add support for DRDY signal from magnetometer
The DRDY signal from the magnetometer is connected to PB8
on the STM32.  This pin is now configured as an external
interrupt and is now used to signal when new data is
available from the magnetometer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1628 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:02 +00:00
stac
4ac001553d hmc5843: convert line endings from CRLF to LF
No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1627 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:21:00 +00:00
stac
ac6989fbeb bmp085: fix configuration of EOC interrupt
The EOC EXTI interrupt configuration was incorrectly
pointing at GPIOG pin 8 rather than GPIOC pin 15.
This was preventing the EOC interrupt from working
properly.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:59 +00:00
stac
88e73906d0 i2c: Add recovery code for i2c bus errors
I2C bus errors are now recoverable.  The bus is properly reset
and an error indication is now provided to the caller whenever
a bus error occurs during processing of the transaction list.

For now, the users of the I2C layer just retry infinitely on
failure.  The BMP085 and HMC5843 code should be changed to
report errors to its callers to allow a more sensible retry
strategy.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:57 +00:00
stac
0122394481 i2c: consolidate handling of AUTO transitions
AUTO transitions in the FSM are now handled immediately
after processing each newly injected event rather than only
at the end of the EV ISR.

This consolidation allows the upcoming addition of event
injection from both the EV and ER ISR contexts.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:56 +00:00
stac
7d5463e5e6 i2c: Move polling for bus stopped from ISR to task/mainloop
Occasionally, the I2C driver races with the STM32 I2C peripheral
at the end of a bus cycle.  This leaves the bus in an errored
state and the stop condition is not properly asserted on the bus.

The polling for the stopped condition was previously implemented
in ISR context since it was expected to be nearly instananeous.
In the error condition, however, the stop condition will never
happen.  The polling for this case is now done by the initiating
task (or mainloop on the AHRS) to prevent the timeout condition
from triggering the watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1623 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:55 +00:00
stac
65ad2caf8a i2c: Make transaction initiator available in txn list
The info field in the pios_i2c_txn list can now be used
to provide a const string which describes the context
for this transaction.

This is very helpful when diagnosing an error that occurs
somewhere in the middle of the I2C FSM since the FSM runs
primarily in the ISR where the original context for the
transactions is no longer available in the traceback.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1622 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:53 +00:00
stac
85c60479c1 i2c: rename FSM faulted state
Differentiate the _FSM_ faulted from the (soon to
exist _BUS_ faulted state.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1621 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:52 +00:00
stac
139da048f6 ahrs: remove unused debug code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1620 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 14:20:51 +00:00
pip
cc3860daaf Added 'uint32_t PIOS_SYS_getCPUFlashSize(void)' into pios_sys.c/h files.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1616 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 09:18:55 +00:00
peabody124
c5fe985a45 AHRS: Gets timing working correctly to compute the EKF rate and idle time in real values
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 07:03:36 +00:00
peabody124
0875dc8442 AHRS: First pass refactoring the ADC code into another function. Still want to clean up a few constants make the downsampling go into a smaller circularbuffer nicely.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1614 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 07:03:34 +00:00
peabody124
1051d894b9 AHRS: Merged in some new code from Dschin that expliclity writes the prediction terms in the covariance matrix. Also made changes to compile with -Os. Now runs around 125 - 150 Hz depending on corrections used (this will become adjustable from GCS shortly).
Squashed commit of the following:

commit 897e3365ab6c762584c34238efd12dc144e72af0
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 22:15:21 2010 -0500

    AHRS: Getting it running nice and quickly.

commit 53d72fb849164730c89873cab81c9e09be0b112b
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:57:46 2010 -0500

    AHRS: Make more variables volatile for -Os.

commit 4fa90821b5d3d8c2ea5e67756313a8a63c0eeb8c
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 15:11:31 2010 -0500

    AHRS/Makefile: -O0 not added to allow me to try various space flags that don't break code.

commit 5bd17a304dc28dc271c2f3e8c6cb8ad4a830404f
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:44:05 2010 -0500

    AHRS: Make debuggign USART easy to disable

commit 5453f2a7939492769fe9e9cc822e69c107320670
Author: James Cotton <peabody124@gmail.com>
Date:   Mon Sep 13 14:38:37 2010 -0500

    AHRS: Explicitly expand covariance prediction.  Brings computations from 160 to 90.  Makes it not fit in AHRS though.

commit b6712da7eece2a464a2073d24b77be22bfa47094
Author: James Cotton <peabody124@gmail.com>
Date:   Sun Sep 12 22:59:42 2010 -0500

    AHRS: Make it easy to comment out the I2C/Magnetometers.

commit 8c84d0091f3d6f6bedc7a0224a4ed9cb099b022b
Author: James Cotton <peabody124@gmail.com>
Date:   Thu Sep 9 00:49:50 2010 -0500

    AHRS: Small change to INSGPS analysis tools

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1613 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-14 06:42:56 +00:00
pip
7da2fc2ba7 made ahrs_state 'volatile' in ahrs.c to prevent compiler optimization lockup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1612 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 20:56:58 +00:00
pip
8bfaa997d3 made curr_state 'volatile' in pios_i2c_priv.h to prevernt compiler optimization lockup.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1611 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 20:52:56 +00:00
peabody124
4a4932e5ff AHRS/FSM: Small initialization detail to make compile with -Os
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1610 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 19:04:37 +00:00
zedamota
66560786f4 Flight - #ifdefs to make it work with both normal and bootloader packet formats.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1609 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 17:08:52 +00:00
chebuzz
3b5b129445 Fix POSIX simulator to work with new VTOL UAVObjects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-13 14:00:53 +00:00
peabody124
47a7b8548b Flight: Safety feature for VTOL. Don't enable motor until throttle brought above .5 then below or to zero.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1604 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 22:18:21 +00:00
peabody124
76971a807c AHRS: Some more tweaking of the timings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1603 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 22:18:18 +00:00
zedamota
257b4d2c95 flight - BL AHRS Comms - fixes to make it compile, not tested yet.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1601 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 21:08:43 +00:00
peabody124
ba34bb8c24 AHRS: Oops, didn't notice the message processing was removed from end of loop. Adding back.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1597 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 12:44:57 +00:00
pip
d0b8a9755d Added USB_LED_ON/USB_LED_OFF and checks to see if they are defined to the PIOS_USB_HID_ChangeConnectionState function ..
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1596 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 10:47:20 +00:00
pip
9fca16db41 Added an RTOS detection is 2 places because I'm using this file on the modem (without an RTOS). #if defined(PIOS_INCLUDE_FREERTOS) ...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1595 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 10:33:45 +00:00
peabody124
59758122e1 AHRS: Cannot process messages while idling as this makes the main loop execution time non-deterministic based on OP (i.e. could get three messages and push the time up). It would be a nice featuer since you can get a raw and EKF update in the same step, but if the AHRS_Comm loop is fast (which is should be to keep update latency low) then this will hammer the AHRS with redunant requests.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1594 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:51 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:49 +00:00
peabody124
56131476ef AHRS: Switch to sampling at 2khz, plenty of CPU usage. However need to make EKF rate different for outdoor mode with this patch because otherwise will drop samples :-(
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1592 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:47 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:44 +00:00
peabody124
c376711405 Flight/Stabilization: Make the derivative account for the sampling time (dAngle/dt) for the PID loop since integral does and also make the integral bounds uavobject settings. It was originally bounded by constant/Ki but I'm not sure why as you change the gain of the error integral you also want to decrease the maximum error it can cause.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1590 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:41 +00:00
peabody124
8999355327 Flight: Made actuator a periodic task. I don't think the queue is low enough latency - should figure out how to make this happen as callback is the right way to go.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:38 +00:00
peabody124
dceb20b16d Flight: VTOLStatus object that returns the thrusts on all the engines
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1588 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:34 +00:00
peabody124
bba3b0c64a Flight: VTOLSetings object to contain the mixer settings for VTOL crafts
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1587 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-12 02:54:30 +00:00
stac
d18e0c3ef8 ahrscomms: Add low-level message code for bootloader msgs
Implement low-level utility functions for sending/receiving
the opahrs proto v0 (bootloader) messages.  These are used
by the OP firmware loader and the AHRS bootloader.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1586 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:31 +00:00
stac
c3c8a30bfc ahrscomms: fix return values on error
Some functions were returning -1 instead of one of the
valud enum values.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1585 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:29 +00:00
stac
6bf3038f3f ahrscomms: provide helper function for simple requests
This cleans up some of the boiler plate code that is
repeasted for simple (empty) requests that expect a
response.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1584 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:28 +00:00
stac
7ecbb5f5b8 opahrs_proto: Add new boot and versions messages
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1583 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:26 +00:00
stac
d1dc300081 ahrscomms: remove unused sync and switch_proto messages
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:25 +00:00
stac
80c92ba54b ahrs: process SPI messages while idle
This makes the AHRS continually process SPI messages
while waiting for new samples to be ready.  This has
the side effect of making the CPU utilization on the
AHRS pin at 99-100% (ie. we make use of all of our
otherwise idle time).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1581 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:23 +00:00
stac
93ef510946 ahrscomms: use relative delays to avoid slipping
Change from using vTaskDelay to using vTaskDelayUntil to
ensure that we're trying to stay periodic rather than
just waiting a fixed amount of time after each loop of
processing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1580 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-11 23:06:22 +00:00
dschin
e6fea9bb76 Changed the feedback gain matrix K to a global variable in insgps so that it may be inspected.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1577 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-10 20:46:46 +00:00
zedamota
aa1af2b9f3 OP-21/Flight Bootloader - Changes to make it independent of RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1570 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-09 18:44:55 +00:00
peabody124
6cdb9b0b48 AHRS: Added Matlab code to analyze the INSGPS friendly data dump format and plot the important variables. This requires "DUMP_FRIENDLY" be enabled in the file.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1560 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-08 06:15:21 +00:00
peabody124
e499f33fd5 AHRS: Improved code to stream raw data from AHRS and added a matlab function to acquire and analyze the data. The QT program to analyze it should work but QextSerial seems to have a bug and drops or inserts data
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1559 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-08 06:15:18 +00:00
peabody124
9895b403c7 Ground/SerialLogging: Improved the serial dump from AHRS to have a big random frame header and to detect it on the logging program.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1556 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-07 16:33:10 +00:00
cwabbott
c2e93aa810 PiOS/win32: Made the process priority "high priority" for OpenPilot.exe to help with accurate timing. Also removed some unneeded debugging code from tasks.c.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1553 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 21:23:02 +00:00
peabody124
e06162fa3a Flight/AHRS: Reorganized the code a little to make sure indoor used by default unless GPS updates come
in.  Also change the velocity variance in indoor mode to lower to make it get a better attitude estimate (primarily faster convergence - probably will tweak this in the future dynamically).  Finally decreased barometer variance - in scope it's actually quite reasonable, normally within +/- .5 m.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1546 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 07:54:19 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 02:58:41 +00:00
peabody124
61854ac6ab Flight: Support for quadcoptors. The format of this control will change to support octo's and more flexible tuning.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1544 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-06 02:58:39 +00:00
stac
95595664c3 telemetry: fix comments around #ifdef
No functional changes.

The closing comment on some of the USB_HID related
ifdefs was outdated.  Fixed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1541 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-05 23:10:34 +00:00
zedamota
492227c916 OP-21/Flight Bootloader - Donwload function is now interrupt driven. Had to increase IN polling interval due to some problems.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1530 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-05 00:17:20 +00:00
peabody124
f9a0b799a2 Foolishly forgot object like I always do
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1529 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 22:01:11 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 17:07:59 +00:00
peabody124
8dbc382e5b Ground/CoordinateConversions: Shows correct location now. I just typed in a 3.14 constants and forgot to change to M_PI.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1520 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 05:58:43 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 02:19:06 +00:00
peabody124
404e0c2f44 OP-132 AHRS: Changes to the Indoor flight handling to only use the barometer indoors and update with a zero for velocity and high variance.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1517 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 02:19:04 +00:00
peabody124
a406034ed9 OP-132 Flight/AHRS: Changed the heuristics regarding GPS quality and INSGPS updates. Now if satellites < 7 or PDOP > 3.5 it does not perform GPS updates. Professor is working on some code to fix parts of the covariance matrix. If indoor updates high a 0 position and velocity and high variance.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1515 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 02:19:00 +00:00
zedamota
8233f87b0a OP-21/Flight Bootloader - Download function fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1513 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-04 01:06:40 +00:00
dschin
84d054c4ed gdb command file to enable debugging with interrupts in Eclipse
See http://forums.openpilot.org/topic/1671-debugging-with-interrupts-in-eclipse/
for details.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1511 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-03 13:10:04 +00:00
cwabbott
d7a3ffb464 flight/PiOS.win32: update Makefile.win32 with new UAVObjects, also change UAVObject headers to have a newline at the end.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1510 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 23:55:24 +00:00
zedamota
749267aee5 OP-21/Flight Bootloader - Minor bug fix.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1508 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 22:43:32 +00:00
zedamota
7a66232be0 OP-21/Flight Bootloader - Complete recoding. WARNING- As with all flash memories, the one in your OP HW as limited write cycles. Errors in this bootloader may damage your HW if it falls under a write or erase dead loop. This is still under development, for devs only.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1507 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 20:13:41 +00:00
peabody124
d3bb821e82 Flight/ManualControl: Change to ManualControl module to make warning only kick in if input is less than the max and min for throttle. Disable going to (unimplemented) auto mode. Commiting based on one yay and no nay.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1505 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-02 16:33:02 +00:00
peabody124
a377bea862 Ground/CoordinateConversions: Found out from Dschin that rotation matrix inverse is rotation matrix transpose. Now should convert correctly from NED to ECEF. I will check tomorrow by frolicking around with a plane.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1494 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-01 03:12:06 +00:00
peabody124
ec7d059de8 Posix: Corrected makefile after UAVObjects mashup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1489 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 17:21:44 +00:00
peabody124
b853c392f3 Flight: Was only returning half of the serial number (thanks for catching that Pip)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1476 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 02:33:47 +00:00
peabody124
12657440c3 OP-132 AHRS: Added an indoor flight mode and also add an ad-hoc quality heuristic to the GPS signal to increase the measurement variance from GPS when fix quality is poor or when in indoor flight mode. In addition corrected the indentation to conform to the tab/space convention forum discussion.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1474 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-31 02:11:09 +00:00
pip
7813414f29 added casting to prevent int overflows when calculating the watchdog delay
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1467 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 16:48:33 +00:00
pip
ba5f1b37ee changed pios watchdog from 8-bit to 16-bit ms capability, plus moved the .h file from the .c folder into the inc folder
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1466 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 16:29:36 +00:00
andrew
65dc5e9b04 Yaw stabilisation for the simple algorithm was calculating the error and not taking into account that 350º error is the same as -10º error.
The resultant error could range from -360º -> +360º
Since this is only used for Helicopters / multi rotors, and the aircraft can rotate in any direction, I added the modulo logic so that it is now from -180º -> +180º this should now take quickest path to correct the error.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1464 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 01:20:43 +00:00
andrew
3c6d9d6976 manual control was mapping tx input as -180º -> 180º for AttitudeDesired.Yaw.
The Wiki (http://wiki.openpilot.org/Unit_Standards) states this should be 0 - 360º
Made the code match the wiki.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1463 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-30 01:16:00 +00:00
cwabbott
f55e9cf819 Fixed a slight problem with the .metadata folder, the flight project wasn't pointing to the correct folder again.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1462 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 23:16:19 +00:00
dankers
7a1353506e Just added my plugins dir to what was already there, no guarantees to fix things!
Might just make them worse!


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1460 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 22:15:38 +00:00
stac
78befcba73 conversions: fix return code for ECEF2LLA
As pointed out by osnwt in the forum, the
criteria for success of this function was
wrong.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1456 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 14:51:07 +00:00
peabody124
f202884ce8 AHRS: Numerous changes. Added CPU load monitoring for AHRS as well as some friendly debugging output options. Also added a new CalibrationMode setting to AHRS (Echo) to speed up sensor calibration. Cleaned up the 6 point calibration interface to make it more friendly, but I think Edouard will clobber it with something nice and sexy :).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1455 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 06:38:30 +00:00
stac
ecac1fb79d nmea: parse GSV sentences and populate GPSSatellites object
This creates a new UAVObject called GPSSatellites to hold
information about which satellites the GPS receiver can see
and the quality of their signals.

NMEA GSV sentences are now parsed.  The full set of GSV data
may be split across multiple GSV sentences, each containing
info for at most 4 satellites.  Once an entire set of GSV
records has been collected, the GPSSatellites UAVObject is
updated.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1453 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:14 +00:00
stac
2ead641136 nmea: minor bug fixes and robustness improvements
Remove asserts on bad data, only assert on coding errors.
Remove unnecessary inline qualifier to reduce code size.
Handle more lat/lon precisions in conversion to fixed-point.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1452 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:11 +00:00
stac
679f59f19d uavobjectparser: fix alignment of field init in generated code
Change from spaces to <TAB> to match the formatting in
the template.  No functional changes, just whitespace.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1451 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-29 01:46:09 +00:00
peabody124
8128c3bbfa OP-118 AHRS: Added 6 point calibration routine to AHRS config widget. To use it, click "Cal Mode", then place the AHRS on each of 6 sides of a cube then click save position. Finally click compute to push the updated scale abd bias terms to the AHRS. Also fixed a bug in UAVObjectField that would not allow you to setDouble for extra fields.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1449 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 18:48:51 +00:00
andrew
3530428982 Fixed the bounding of servo outputs for the case when max < min
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1444 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 05:11:19 +00:00
peabody124
00cad250ea Adding gpstime.h for flight.
Seriously - I'm sorry I missed all these files.  I suck.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1443 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-28 00:58:04 +00:00
peabody124
ced0a4b952 AHRS: Fixed silly bug that made the default mag variance be zero - explains "hopping around" default behavior. Still should run calibration though.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1439 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 21:05:41 +00:00
peabody124
5f9289f0c0 Flight: Keep getting WMM memory usage down
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1438 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 21:05:38 +00:00
zedamota
2142467751 OP-21/Flight Bootloader - Added more Led status modes. Fixed downloading for bigger packet format.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1436 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 20:03:51 +00:00
peabody124
16361dea12 AHRS: Making AHRS populate the NED/Vel fields of PositionActual. May rename object to PositionVelocityActual. Also created a GPSTime object which is populated from the GPRMC command. Also added a GPZDA parsing command, but by default OP GPS doesn't send this command. Made the computation of the world magnetic model use the current time to set the magnetic vector. Note: currently if you set your home location and save it to SD, this will not recompute the vector over time. I'm not sure how sensitive this is.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1435 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 19:59:25 +00:00
stac
a19c225697 ahrscomms: reduce retries and retry delay
The number of retries and delay between retries was
increased in a previous commit.  This doesn't appear
to be necessary so I'm reverting the increases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1432 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:15:02 +00:00
stac
24a4c6b791 gps: Update GPSPosition instead of PositionActual
GPS module now updates GPSPosition UAVObject
rather than the PositionActual object.  The
GPSPosition object is intended to be consumed
only by the AHRS.  The AHRS will use this (and
other inputs) to compute a filtered version of
the position in the PositionActual object.

This commit will cause temporary breakage of the
GPS functionality in the GCS until the PositionActual
object is properly updated by the AHRS.  Most of the
GCS should continue to use PositionActual.  The only
exception to this might be any tool for specifically
visualizing the raw GPS state.

GPS.c is now only responsible for receiving a
complete NMEA sentence from the COM interface.

NMEA parsing is now factored out into NMEA.[ch]
which is where GPSPosition is now updated based
on the complete NMEA sentences obtained from the
GPS.

Latitude and Longitude are now encoded in a
fixed-point notation in units of degrees x 10^-7
to prevent truncation of precision due to encoding
into a float.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1431 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:15:00 +00:00
stac
47df1faa8d ahrs: whitespace adjustments
No functional changes.  Whitespace/tab fixups only.
Use TRUE/FALSE instead of 1/0.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1430 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:14:58 +00:00
stac
670452307d ahrs: remove unnecessary memset() of rx message buffer
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1429 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:14:56 +00:00
stac
0a7088c24a ahrs: fix type on flags, remove redundant code
No need to have boolean flags being floats.
Some of the attitude message was being populated twice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1428 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 02:14:54 +00:00
peabody124
a0b21bef45 Flight: Got read only check working for UAVObjects and modified the ManualControl Module to use it. Edouard - please check over this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1427 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 00:15:48 +00:00
peabody124
a8df6e2c4d OP-128 Flight Documentation: Added description to all the UAVObject (now mandatory) and changed the parser to populate this information into the autogenerated files. Also added a function to test if an object is read only for flight.
Since there are a lot of autogenerated changes the important ones are:

  flight/OpenPilot/UAVObjects/inc/uavobjecttemplate.h - added description and define to make the ObjectReadOnly query
  flight/OpenPilot/UAVObjects/uavobjecttemplate.c

  flight/OpenPilot/UAVObjects/uavobjectmanager.c - added the UAVObjReadOnly query

  ground/src/libs/uavobjgenerator/uavobjectparser.cpp - added parsing of description field

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1425 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-27 00:15:42 +00:00
zedamota
7f76b7f5a0 OP-21/Flight Bootloader - Fixed an error introduced on last rev.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1417 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-26 16:26:51 +00:00
peabody124
c07e1416b7 AHRS: Serial output option for AHRS and corresponding serial logger.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1414 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-26 06:25:11 +00:00
andrew
2361af19fb First attempt at ccpm mixing for single rotor helicopter.
This has throttle and pitch curves implemented and can be configured for many swashplate configurations.

This has flown a 450 clone (with training wheels) and the ccpm worked well.

Still need to neaten up some stuff and work out how to implement yaw stabilisation in manual mode.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1412 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-26 06:00:57 +00:00
zedamota
d71ade8227 OP-21/Flight Bootloader - Now if USB not connected it jumps directly to FW. If connected it will wait 5 seconds for command, then jumps. Also changed led flashing to PWM and created a timer for the delays.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1409 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 22:31:14 +00:00
peabody124
8dd81443be OP-122 Flight: Same changes regarding 62 byte limit applied to the receiving code on the device.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1405 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:56 +00:00
peabody124
dd491160c5 OP-121 OP-122 Flight: Improved the Blocking/Nonblocking behavior for USB to be correct. I'd like a mutex still around the transmission buffer but don't want to slow down the interrupt.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1404 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:54 +00:00
peabody124
4ca10e92c7 OP-121 OP-122 Flight: Improved USB HID communication.
1. Added reenumeration function and call it on USB init (device will appear after reprogramming now)
  2. Moved buffer.c to general flight/Libraries location
  3. Removed the 62 byte transmission limitation by adding a transmission buffer
  4. Sped up USB communication by increasing endpoint polling frequency

Note, that the nonblocking and blocking USB send functions are not blocking entirely correcting.  The blocking calls the nonblocking, and the nonblocking blocks until the last chunk has started tranmission if it's a big transmission.  The buffering I added would generalize to non-blocking nicely, but would require using the EP1(IN) callback to handle most of the tranmission.  This creates a lot of issues if one function is pushing data onto the buffer and the interrupt is sending.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1403 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 05:32:52 +00:00
andrew
b467b419e6 OP-103, UAVObject update.
Adding settings for configuring CCPM mixing for Helicopters to ActuatorSettings and SystemSettings UAVObjects.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1402 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-25 00:55:15 +00:00
zedamota
6da48dcc1a OP-21/Flight Bootloader Changed packet size to 64byte
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1398 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-24 18:26:44 +00:00
zedamota
f91ae974a7 OP-21/Bootloader Small change. Now turns off interrupts before jumping to code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1393 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 21:30:09 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 06:03:19 +00:00
peabody124
beac0c0ea9 AHRS: Get the signs for the simple algorithm correct
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1385 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 04:12:14 +00:00
peabody124
e94d3d3846 AHRS/Flight: Allow selecting simple algorithm as well as INSGPS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1384 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 03:51:08 +00:00
peabody124
bd8fffe4d0 AHRS/Flight: Renamed AttitudeSettings to AhrsSettings to make it more intuitive. Added the ability to change the algorithm from GCS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1383 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 03:39:13 +00:00
peabody124
b32184d1ec OP-119 Flight: Converted HomeLocation object to use cm for the home base instead of floating point.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1382 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 02:49:53 +00:00
peabody124
2596f43511 OP-120 AHRS: Moved conversion of quaternion to RPY over from AHRS to OP to minimize transfer and computational load on AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1381 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 02:35:39 +00:00
peabody124
0d11493337 Flight: Added mixer settings for elevon. Also added bound checking on servo outputs which becomes important when multiple things are mixed and you want to use the full range.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1380 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 01:54:58 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file."
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 00:52:56 +00:00
zedamota
002c746076 OP-21/Bootloader deleted old one, commited new one. Partly functional, but slow due to current packet size.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1378 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 19:51:55 +00:00
peabody124
2e705e6836 OP-116 AHRS: Made data going to the AHRS in NED format. Once the final estimate object is created I'll repeat the same calculation to populate it, although we want to avoid going back to LLA format on the OP because the CPU requirements are excessive.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1376 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 19:01:36 +00:00
zedamota
6adc834d9b OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1375 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:57:29 +00:00
zedamota
2daa229a2d OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1374 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:56:00 +00:00
zedamota
b0d1d0dd09 OP-21/Flight Prep work for the USB HID bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1373 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 18:54:57 +00:00
peabody124
60332efec0 OP-118 AHRS: Missed the auto generated files for the default values. Also no idea why last patch changed navigationsettings - either make uavobjects does differently on different platforms or someone forgot to run make uavobjects.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1372 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 17:02:12 +00:00
peabody124
0862d64b8c OP-118 AHRS: Made default calibration values friendly for people. Also fixed bug that would repeatedly trigger calibration when it was requested.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1371 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 16:43:00 +00:00
sambas
7859a130e8 Fixed bug that caused Object Browser to crash
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1369 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 08:59:18 +00:00
pip
78868216ca Fixed UART-1 structure definition error (pios_usart_cfg pios_usart_serial_cfg)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1368 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 08:59:00 +00:00
cwabbott
e27adf700b Fix posix and win32 makefiles for recent UAVObject changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1367 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:59:12 +00:00
peabody124
5662d85c4e OP-120 AHRS: Tightened up the communication protocol so it runs more quickly. Looks ok in gdb but GCS not crashing right now (rendering error) so I can't test it properly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1366 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-22 00:21:54 +00:00
corvus
9bb085b7fc Documentation: Added Flowchart for HiTL mode
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1365 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 23:05:12 +00:00
peabody124
8897c441fa OP-118 AHRS: Added AHRSCalibration object and messages associated with that to AHRS. Also made AHRS run calibration only when requested. We will create a GCS plugin that runs through computing the calibration settings. To compute the variances on the AHRS set the measure variances to true, wait ten seconds, then set it to false to read it back.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1363 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 21:46:02 +00:00
patrick
564a68e825 PipBee: Updating project files to fix compile errors. Routine just toggles each LED successively. There is a known error when enabling the PIOS_COM_Init(); or more specifically PIOS_USART_Init(); which blocks at some point when called. This may be due to the pios_board.c defines which I will check later today.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1361 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 20:01:37 +00:00
pip
227b389e99 Attempt 2 - trying to get LEDs to flash
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1359 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 18:14:18 +00:00
pip
519ce846ee Just trying to get a simple 'Hello World' program going (LED flashing)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1358 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 17:14:34 +00:00
stac
b36d251bd9 ahrs: remove debug code in attitude handler
Debug code was previously using the q4 element
in the attitude message to encode a cycle counter
to measure performance on the AHRS.  This is no
longer valid.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1357 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:23:14 +00:00
stac
26e257d340 spi: slow down OP <-> AHRS spi link
Issues have been reported with CRC errors
on the SPI link between the OP and AHRS
boards.  Slowing the link down eliminates
the errors in my testing.

If we speed this link back up in the future,
further investigation will be required to
diagnose the source of the CRC errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1356 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:20 +00:00
stac
635df28c34 GPSPosition: Add new UAVObject for GPSPosition
This object is not yet populated or used.  This
will soon hold the raw position data from the GPS
receiver.  PositionActual will be converted to
hold the computed position from the AHRS.

Contents of this object are still subject to change.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:18 +00:00
stac
7f85143bd2 OPModule: updated GPSPosition object
Updated GPSPosition module to reflect the planned use
of a fixed a fixed point encoding for lat/lon.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1354 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:16 +00:00
stac
f388deef34 hmc5843: standardize line endings
This file had mixed line endings.  Now they're all the same.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1353 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:14 +00:00
stac
a960d6e1b1 GPS: fix typo desimal->decimal throughout
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1352 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:12 +00:00
stac
7b2111e512 baroaltitude: rename AltitudeActual to BaroAltitude
This is to align the object names to matches the UAVObject
architecture doc.  No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1351 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:10 +00:00
stac
47c36b3da0 i2c: fix error in FSM for restarted reads
The transition from the ADDR state to the read state
was broken for non-final reads.  The FSM diagram was
also wrong for this transition.

Since reads are always the last transaction in a sequence
in our current usage, this doesn't actually fix any known
bugs.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1350 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:06 +00:00
stac
98822bff98 i2c: force bus free on warm starts
Since the i2c bus is bidirectional, there are certain
states (eg. part way through a read) where the slave
device is in control of driving the SDA line.

On a cold start (power on), the slave devices are all
quiescent and will not drive the bus.  However, on a warm
start (eg. watchdog or jtag restart), it is possible that as
the CPU boots, the slave device may be holding the SDA line
low.  This is a bus busy condition and will prevent the I2C
bus master in the CPU from being able to seize the bus during
init.

The fix for this is to clock the i2c bus sufficiently to ensure
that the the slave device finishes its transaction and releases
the bus.

Once the slave has released the bus, the bus master can properly
initialize and assert a STOP condition on the bus.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1349 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 16:19:02 +00:00
peabody124
ba4dc14cea OP-124 Flight: Added fields to the AHRSStatus to track failures of each of the SPI message types.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1347 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 09:21:39 +00:00
peabody124
bb79ba66fa OP-119 AHRS: Converted the big data structures for the WMM calculation to be allocated on the stack, which forced a dependency on FreeRTOS :-( but keeps things on the heap. Also changed the HomeLocation object to include a Set field. When this is false, OP will try and update it whenever it gets a 3D fix. If it is saved to disk with this field as true, then it won't need to get a lock to send the magnetic flux vector to the AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1346 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:44 +00:00
peabody124
4b0a0236d8 OP-119 AHRS: Increased GPS stack size to allow WWM to not overwrite other memory. In addition converted all the calls to use pointers so I will switch to using pvPortMalloc vPortFree to get it off the stack entirely. Now correctly computing flux for me and running.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1345 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-21 08:35:41 +00:00
peabody124
2031cfe4d0 OP-119 AHRS: Added error counters for the messages as well as changed an error on AHRS echo back for the HomeLocation message.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1344 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 22:52:13 +00:00
peabody124
86766ecc14 OP-119 AHRS: Removed WMM computation for now because it was triggering a reset (probably not watchdog) which is weird - it worked on AHRS. Maybe running out of memory? Also added the break on comm error in ahrs_comms to resync with it. I think the message to send the home location is also not working right now. Fixed chip reset.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1340 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-20 14:48:02 +00:00
peabody124
ef0b307353 [OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1337 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 20:38:27 +00:00
FredericG
fd986f3437 OP-90 Configuring the ET OSD without eLogger. The module can now read a opaque config-file from the SD-card card and send it to the OSD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1336 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 17:32:18 +00:00
peabody124
3c4def13cc AHRS: Added message to pass GPS information into AHRS from OP. This is then converted
into NED reference frame and used in the INSGPS algorithm, although currently this
information isn't propagated back to OP.  Data structures related to the GPS position
into the algorithm and the position estimate out will likely be in flux.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1334 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 05:18:34 +00:00
peabody124
8bcff21184 Flight: Made the actuator module perform a get after set to allow configuration module to override servo position.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1329 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 20:47:36 +00:00
FredericG
0b9079e277 ET OSD: removed existing debug and config code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1327 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 19:15:43 +00:00
peabody124
cfd20922cd AHRS: Added the filtered data to the attitude raw object. Even though this seems like an oxymoron it's still raw to the EKF algorithm, and nice to see the real values after filtering to make sure nothing weird is going on. However, if people don't like this I'm open to suggestions/patches. I'd maybe suggest the whole attituderaw object be converted to ahrsraw anyway since it's more like that (eg. none of the values are actually attitude estimates).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1325 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:54:24 +00:00
peabody124
fda6fc8371 Merge branch 'mac_support'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1324 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 14:29:53 +00:00
peabody124
450cf07a89 AHRS: Keeping magnetometer I2C address consistent with change to I2C driver.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1323 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 13:54:15 +00:00
FredericG
b46bc68e96 "addr" field of I2C transaction struct now takes real I2C address, and not address that is pre-shifted to accommodate the R/W bit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1321 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 10:04:55 +00:00
FredericG
be2f5bbf70 ET OSD: Adapt to new I2C API
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1316 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 09:31:54 +00:00
peabody124
4cba4929c2 AHRS: Fixed another bug in decimation code - I stupidly used Matlab 1 based indexing. Adjusted timing of AHRS so it can process all the data and doesn't miss updates. Finally adjust all inputs to INS to have correct sign and orientation (I think). This is X is forward, Y is right, and Z is down which is mentioned in the forum as our standard and fits the algorithm. The magnetic sensor driver should be modified to return in this order (currently reads X,Y,Z registers which maps to left, back, up) but maybe since it's a board dependent orientation it's better where it is.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1315 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 05:47:44 +00:00
dschin
9ae9c87574 Six point sensor cal for accels and/or mags
Uploaded here for now - belongs in GCS probably.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1310 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 19:02:07 +00:00
peabody124
64bcebb87a AHRS: Fixed bug in the downsampling code (used a += a + blah, dumb). Also added initialization of the magnetic flux based on fixed GPS settings (I hope you're near Houston). I will add the GPS communication shortly.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1307 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 05:32:07 +00:00
dschin
ae18a8e89c Added general functions for coordinate conversions
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1306 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-17 00:09:32 +00:00
dschin
4f31bfbef7 Fixes for the project files. Hopefully they don't break someone else.
Eclipse Workspace:
- Made project in Eclipse workspace point to trunk/flight
- Re imported launch configurations from previous version

OpenOCD
- added "ft2232_device_desc "Dual RS232-HS"" back to jtag cfg files because windows didn't like it w/o it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1305 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 23:40:27 +00:00
peabody124
f74268b5e5 Cleanup and documentation.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1304 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:24 +00:00
peabody124
a23f3c66f4 Behaving reasonably, added calibration code which runs by default on startup and take 6 seconds - this will be called from GCS in future and saved to SD card.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1303 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:22 +00:00
peabody124
e0d63103ec Added a testing function for INS - currently doesn't stabilize for fixed inputs. Fixed two bugs I found in INSGPS (R[10] instead of R[9] initialized and Nav.Pos[2] was set to wrong X element).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:20 +00:00
peabody124
d2e234b53a Adding the code from Dr. Dale to the AHRS. Currently diverges though, but not on the PC.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1301 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-16 16:58:18 +00:00
peabody124
ddbd4f8c80 Simple attitude calculation based on gravity and magnetic vector
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1298 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 06:03:44 +00:00
peabody124
3f408ad655 AHRS: Changing AHRS to use a DMA double buffering scheme with continuous samping for the analog data, then a simple fixed point FIR/decimate function. Currently all the oversampling parameters are hard coded as definitions, but will be updated to be configurable via settings.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1297 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:09:01 +00:00
peabody124
cc2441d41b Adding ADC downsampling code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:08:57 +00:00
peabody124
ed70cb4794 [AHRS] Missed a setting for the ADC configuration.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1292 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:12:00 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
peabody124
d4c5dba234 [PIOS] The ADC mappings are strange because of the way the DMA engine works. Basically data is packed 16 bits ADC2 then 16 bits ADC1 channels, so the accels are pins [4 2 0] currently. Also there is inconsistency between the names of the pins in the config file which uses 1 based indexing and the index for PIOS_ADC_PinGet which is zero based and has to account for this interleaving. Probably should adjust config file to be zero based and then to make those pin numbers map to the function call. The actual order they appear is arbitrary as the ADC engine can scan in whatever order.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1290 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 00:53:30 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
5d635d4233 uavobjects: regenerate existing uavobjects
No functional change, uavobjects were not regenerated since last
change to the object generator.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1288 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:07 +00:00
vassilis
a075eafb98 FlightArchitecture: Updated description of Stabilization module (air/ground speed handled by guidance module)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1285 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:19:33 +00:00
vassilis
9cd76fbe46 FlightArchitecture: Added Climbrate and Airspeed fields in Position objects
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1284 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 14:04:28 +00:00
vassilis
697b3510fb Flight: First release of module architecture and dataflow diagram (still work in progress)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1283 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 03:02:21 +00:00
peabody124
a084d21804 Merge branch 'watchdog'
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1281 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-13 05:18:17 +00:00
cwabbott
c1cf1ec71b PiOS/Win32: Most stable version of port.c so far. Changed Makefile.win32 to use mingw32-gcc to avoid conflicts.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1278 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-12 14:32:52 +00:00
dschin
487b61473e git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1268 ebee16cc-31ac-478f-84a7-5cbb03baadba 2010-08-11 16:18:24 +00:00
cwabbott
1125311083 Fix Eclipse project files.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1252 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-09 18:24:26 +00:00
cwabbott
f041569bfe fixed a small problem in port.c, also added some debug statements.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1246 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 18:38:03 +00:00
stac
f74c6ffdd5 i2c: rewrite i2c layer
The STM32 I2C block has a number of errata associated with it.
These errata are primarily related to timing sensitivities between
the peripheral and the interrupt handler.  In particular, the
correct generation of the stop bit relies on the I2C IRQ running
immediately and not being held off for any reason.

NOTE: The I2C interrupts must be the highest priority IRQs in the
      system to ensure correct operation.

I2C protocol is now implemented as a formal state machine.
See: stm32_i2c_fsm.{dot,jpg} for FSM description.

I2C init is now expressed by const initializers in pios_board.c
for both OP and AHRS boards.

I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays
of an unlimited number of bus transfers to be done atomically.
The I2C adapter driver now handles all bus-level locking across the
list of transactions.  Generation of start/restart/stop conditions
are handled automatically over the list of transactions.

Timeouts have been removed from the API for now.  May be added
back later.

This driver has run error free on both the OP and AHRS boards for
up to 48hrs but it still sometimes fails earlier than that on the OP
board.  There is another possible set of improvements to the driver
that could employ the DMA engine for transfers of >= 2bytes.  This
change would reduce the timing sensitivities between the peripheral
and the driver but unfortunately, both the SPI and I2C interfaces
share the DMA1 engine.  That means only one of these two peripherals
can use the DMA engine and right now, SPI between OP and AHRS is
already using it.

Failures are currently fatal and will lock up the CPU.  This allows
useful information to be obtained in the failure cases.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:15:08 +00:00
stac
b6c1f43145 i2c: Change API to allow passing const config data
Mark the I2C_InitStruct parameter as const so that we can pass
const data as the initializer.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1240 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:58 +00:00
stac
f66e2cbd86 battery: fix doxygen header info
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1239 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:56 +00:00
stac
9050b9d26a ahrs_fsm: minor style fixups
No functional changes.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1238 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:55 +00:00
stac
a320a3e4d4 build: Turn modules back on
The modules were disabled for some reason in r1172.
This just turns them back on for the real targets.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1237 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:53 +00:00
stac
d7856b3d0a gdb: Do not automatically reset target in gdb init file
The gdb init files would previously reset the target immediately
when gdb started up.  This is sometimes an unpleasant side-effect
of running gdb.

In order to connect to the target, use the new "connect" function.
To reset the target use "mon reset".

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1236 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 04:14:52 +00:00
zedamota
a688b95eb6 Flight firmware-Start of the new bootloader
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1235 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 00:14:22 +00:00
dankers
297985c2a0 Move old bootloader to bootloader.old
This should be removed at some point but can wait till we have a working bootloader.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 23:55:28 +00:00
cwabbott
6f553efe45 debug_printf() for PiOS.win32. There are still many issues :(.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1226 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 02:30:35 +00:00
peabody124
0fdfbb2ffb Deleting old USB code that I meant to delete a while ago. Also changed names of some functions to OP. Finally fixed the USB taking over PIOS telemetry. Detects the USB cable and that the configuration has been taken by the USB bus.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1217 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 23:43:52 +00:00
peabody124
0eac218572 Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-05 19:56:36 +00:00
pip
611aee73ad Removed I2C support from PipBee as it's not used. Added 4 LED definitions.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1208 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:35:48 +00:00
pip
0331f05e9a Added extra LED's .. now up to 4 LED's .. (PipBee has 4 controllable LED's)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1207 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 17:32:42 +00:00
cwabbott
d910b8f756 slight changes to get PiOS.win32 to compile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1205 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 14:21:58 +00:00
dankers
1a0f2e81e8 Foundations for PipBee modem code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1203 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 09:37:09 +00:00
cwabbott
c2508bbb9e PiOS for win32
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1200 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-03 19:29:14 +00:00
dankers
a3c1bbfc95 Remove no longer needed SDCard Files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1190 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 14:00:09 +00:00
sambas
7f6336d324 OP-22 Flight/PiOS: Spektrum reworked, input is mapped to old aux in receiver connector, works nicely with calibration plugin. Also bind works, just needs config flag to bind on powerup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1189 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-01 10:34:07 +00:00
peabody124
47da7326e7 Damn thought I'd commited this
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1176 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-29 13:50:24 +00:00
peabody124
23ed7c8435 Removing the device_desc line since it seems to advertise differenetly across platforms and openocd doesn't require it. Please revert this change if it starts block other OS but I don't think it will
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1175 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 21:29:27 +00:00
peabody124
7e6afe5a75 Updated HID code to do packet processing in OS indepdent layer. Should now work on all platforms. Please test and get back to me. Maximum object size of 62 bytes currently.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1174 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 18:55:04 +00:00
corvus
02a78f0470 moved Vassilis stabilization module as of r1153 into Stabilization/simple
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1173 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:03:55 +00:00
corvus
9ad9ffd466 moved new stabilization code into experimental subdirectory
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1172 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 15:00:51 +00:00
corvus
c8486d08e4 Fixed some bugs in OpenPilot Core.
- syntax error in pios_board_posix.c introduced with Doxygen comment blocks
- platform dependant code had been added to openpilot.c instead of pios_board.c
- redundant header inclusion (stm32... already included by PiOS)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1171 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 14:34:48 +00:00
dankers
32e6d53b23 Small comment issue that was causing build to fail
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1170 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 11:28:18 +00:00
edouard
9145a4b1a6 Doxygen work: created "OpenPilot System" group for system libraries and core files. Changed a typo on the Osd Doxygen. Let me know if you're OK with this approach.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1169 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-28 07:28:21 +00:00
peabody124
6f63c10dca Removing more debugging comments
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1168 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:48:12 +00:00
peabody124
3144e3157c Added back checks on USB cable so falls back to serial telemetry if not plugged in
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1167 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 23:11:28 +00:00
peabody124
27bcd20882 HID working on Mac for telemetry. Need to tweak GCS code for Win/Linux
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1166 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 20:50:20 +00:00
peabody124
dac82b3c17 Getting closer for HID. Now a well behaved HID device. Just need to update GCS plugin for new data format and make PJRC wrappre work properly on Mac
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1165 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 19:09:55 +00:00
peabody124
27d429fe18 Got better HID report design with valid data length embedded in report
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1164 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 17:41:56 +00:00
FredericG
66e22b56ce Fix in bmp085 driver. Was not checking correctly if lock on I2C succeeded => caused an assert when used in combination with other I2C devices
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1163 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:52:45 +00:00
FredericG
efaa6c910b MKSerial: also report ground-speed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1162 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 09:49:47 +00:00
peabody124
eb41a84acf And this
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1161 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:09:43 +00:00
peabody124
7d7802593e Oops, sorry missed these files
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1160 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 08:08:50 +00:00
peabody124
fe616df48d Further tweaks. Will start trying to get reliable communication with larger report size tomorrow
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1159 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 07:56:50 +00:00
peabody124
840f7ff456 A version of the firmware that successfully Acks back and forth over HID. Still need to refine the PIOS interface and make GCS strip out the report ID data (if necessary). Also note: currently if you run too many modules the watchdog timer kicks in. I haven't determined if this is due to an interrupt binding up or what (and why it doesn't happen more often since I can't find any code that explicitly resets the WWDG).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1157 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 06:22:34 +00:00
peabody124
d89cd43cd1 Further tweaks to the HID update
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1156 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 05:28:04 +00:00
peabody124
c46dcea73a Pretty major update of the USB HID core. Removed a lot of old code related to custom drivers and BSL (which will be brought back under HID). Device enumerates but still not communicating. Hopefully nothing broken, lots changed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1155 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-27 03:19:07 +00:00
corvus
2621d07574 Added UAVObjects: FlightSituationActual NavigationSettings NavigationDesired
- Added FlighSituation Module (development module for sensor fusion, mostly stub, possibly renamed later)
- Added Navigation Module (development module for navigating towards a point in space - DEVELOPMENT CODE, NOT STABLE YET (I am testing around with this)) 
- Changed Stabilization Module (uses local reference frame now. Stable except for code cleanup/review. Tested in simulator and outperforms old code.)



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1154 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-26 21:26:28 +00:00
dankers
dab978cf98 DOh! should have been part of last commit.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1151 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:35:10 +00:00
dankers
1fb8fc797c Floss-JTAG file for new Revision B of Floss-JTAG (Rowan JTAG).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1150 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-23 04:34:32 +00:00
dschin
e5c19a38c5 In the the \OpenPilot\flight\Project\OpenOCD directory there were two JTAG debugging config files:
1) floss-jtag.arhs.cfg
2) floss-jtag.openpilot.cfg
But the Eclipse project the "external tools configurations" for the OpenOCD Debug is looking for the "floss-jtag.cfg" file in the command line arguments. The added file "floss-jtag.cfg" is a simply a copy of "floss-jtag.openpilot.cfg". The .arhs.cfg doesn't play well by itself.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1129 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-17 22:43:26 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 19:53:35 +00:00
sambas
f5c24d169e flight/osd: Parse config into setupbits and parameter slots
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1115 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 15:24:29 +00:00
peabody124
99e94228a9 More doxygen updates
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1106 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 05:31:11 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-16 01:02:34 +00:00
peabody124
5c41f95a1e Updating OSX project file for new file locations
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1100 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-15 02:16:54 +00:00
peabody124
ebeffa4392 Linux compiler error fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1097 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 15:45:36 +00:00
peabody124
700af355d4 Moved platform dependent configurations to FreeRTOSConfig.h and set windows to run without preemption to reduce CPU usage
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1096 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 15:34:57 +00:00
corvus
aa53b57d55 Changed the Build directory for posix port from Build/ to Build.posix/
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1090 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-14 10:08:03 +00:00
corvus
48db68fe3c add some self made FreeRTOS scheduler documentation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1088 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 18:55:26 +00:00
peabody124
53b90b9492 Updated to use sigwait as an alternative to signals for the timer. Also, added per task suspend/resume flags which should make sure things behave nicely
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1087 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 18:29:39 +00:00
corvus
fa57e42efa Deleted OpenPilot.posix branch. Integrated portability modifications into main tree
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1086 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-13 16:23:41 +00:00
corvus
65d0c93680 Added some comment lines for peabody124 to read ;)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1078 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-12 17:15:00 +00:00
peabody124
68be63bc50 Conditional signaling now works on linux
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1075 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 21:42:59 +00:00
peabody124
cd5c03b809 Ugh, cross platform development.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1073 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:46:22 +00:00
peabody124
0bc526a142 Got the tick handler working on linux so it doesnt jump onto the wrong thread
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1072 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:38:20 +00:00
peabody124
4c4d1ca420 Also added sched_yield().
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1071 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:27:03 +00:00
peabody124
9ff624bc0f I'm an idiot. I put ifndef __darwin__ when I meant ifdef. Works on linux now with minimal CPU.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1070 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 20:23:34 +00:00
corvus
ae4a52e0ed test cases for signal handling
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 16:43:41 +00:00
corvus
71589d2246 simple segfault reproduction
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 15:11:26 +00:00
corvus
0efc69055e fix in print function *ducks*
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 13:57:20 +00:00
corvus
1dd60b54f6 thread safe printf implementation now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1066 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 13:20:22 +00:00
FredericG
5bb4fedc7f attitude seq field was removed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1065 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 12:25:43 +00:00
corvus
ece979a4e1 ported latest changes by Vassilis and Stac to Posix version
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1064 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 12:13:43 +00:00
peabody124
c6b495cdcc This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1063 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 02:23:11 +00:00
peabody124
dd598a75a4 This version runs stably on all three platforms for me. Corvus, please feel free to revert these changes if you want or have a better solution. Also only Mac tested with GCS, the rest just sit there running nicely
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1062 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 02:22:24 +00:00
vassilis
9f2a01a78a Flight/Servo Fix Servo driver buffer overflow, was messing up the I2C and altitude readings, now working fine. Servo index used to be 1-8 but the Servo driver was indexing a buffer out of bounds. Changed everything to use index 0-7 for servo outputs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1061 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-11 01:54:43 +00:00
stac
3896baa908 usb hid: fix compiling with ALLOW_HID_TELEMETRY
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 14:56:27 +00:00
peabody124
bd197886e5 Added some include files for task.c and removed an asserting that is sometimes violated in the signal handler
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1059 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 14:07:28 +00:00
peabody124
083886615a Ok, so its run for a bit on my windows and mac computer, although I've seen a few glitches. Also, need the version of tasks.c in peabody124 which disables interrupts while in the nanosleep command. Unfortunately for windows I have to turn of all the cpu optimization code to make it reliable for now, so it eats cycles
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1057 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 07:31:58 +00:00
sambas
9003cd8eca OP-97 flight/GPS: GeoidSeparation added, need to think that precision problem
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1056 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 07:27:07 +00:00
peabody124
db1dde5d8c Pretty major rewrite which can either run with thread monitoring (windows) or with conditional waits. Definitions in file set mode, but robust for all modes on OSX, now for windows testing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1054 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-10 06:25:33 +00:00
peabody124
60fda40c42 Much more stable on windows now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1048 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-08 16:24:34 +00:00
corvus
cb9afef32d Pios.posix - FreeRTOS port for cygwin - test-file to debug signal and mutex handling
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1047 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-08 10:28:50 +00:00
peabody124
c2cb17ffe7 Working on windows
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1046 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 20:43:05 +00:00
peabody124
bd13811255 A ridiculously simple version that just avoids almost all signal handling needs
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1045 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 18:36:05 +00:00
corvus
2ebe830624 reverting accidental commit
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1044 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 17:47:22 +00:00
corvus
5c7324a28b PiOS.posix - thread management - another variant to test on win32
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1043 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 17:45:12 +00:00
peabody124
5f174108b1 Initial work on pthread_cond based locking, minimizing signal handling (but trusting mutexes)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1042 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 17:43:12 +00:00
corvus
3370f75da1 PiOS.posix - more changes to increase cygwin runability
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1041 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 16:40:38 +00:00
corvus
f82783d77e PiOS.posix | more attempts to fix it on win32
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1040 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 14:43:36 +00:00
peabody124
5f6b3eb11a XCode project file for Mac development (for the Posix port)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1039 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 14:28:48 +00:00
corvus
034d66197b PiOS.posix: bug fix in new scheduler emergency handler
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1038 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 13:09:42 +00:00
corvus
447be5c0a0 PiOS.posix - new version of debugging enabled custom port.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1037 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 12:21:36 +00:00
corvus
64a8302f5a PiOS.posix scheduler - added port.c with debug output for testing
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1036 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 10:47:23 +00:00
corvus
0662269625 some fixed - might run on windows now
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1035 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-07 09:40:17 +00:00
peabody124
48596e838e Cleaned up some signal handling a bit, some handshaking at task switching. For some reason nanosleep occasionally causes problems. Something about it not being a cancellation point
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1034 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-06 23:25:34 +00:00
peabody124
6caf552753 My version that works on linux and mac, not windows
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1033 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-06 22:51:58 +00:00
corvus
ec48207755 PiOS posix scheduler - added simple docu about scheduler work
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1032 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-06 21:56:43 +00:00
corvus
7aa693ed3e PiOS posix port - threading - test implementation
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1031 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-06 21:55:22 +00:00
corvus
b13f8296dc POSIX port: some improvements as suggested by stac
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1024 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 21:44:09 +00:00
corvus
2e373c5dfc pios_com_udp: explicit type cast to prevent compiler warning
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1020 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 11:24:43 +00:00
corvus
455a99a3cf some changes to increase platform independence
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1017 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 09:27:53 +00:00
corvus
c7479b796b merged chages 995:1015 into posix branch
(See? That's why I hate branching - thank the gods that subversion has the "merge" command)


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1016 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 08:50:40 +00:00
stac
17bea4cb91 ahrscomms: connect the OP board to the AHRS board
The AHRS comms module now sync's with the AHRS and
exchanges interesting data periodically.  Whenever
the link to the AHRS is down, the AHRSComms alarm is
raised.

This is fairly basic for now but provides the last
piece of the infrastructure to move data back/forth
between the OP and the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1014 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:49 +00:00
stac
05485e5b63 ahrs: tie main loop into SPI link FSM
- AHRS mainloop now runs flat out updating sensor data and
processing any messages sent from the OP board.
- Raw data is provided from the magnetometers
- Fake data is provided for attitude solution
- Correct data is provided for serial number queries

Note: There is a bug in the i2c code that very quickly leaves the
      magnetometer in a broken state and returning incorrect values.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:47 +00:00
stac
29a8f05ac9 mag sensor: put some bounds on the parameters
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:45 +00:00
stac
a3a2dbd634 spi: Add support for hardware CRC generation/checking
PIOS SPI devices may now make use of automatic CRC generation
and checking on block transfers.  Only supports CRC8 for now.

Since the SPI interface CRC calculation continues across message
boundaries (ie. not reset on every transfer), we must manually reset
the CRC registers for every transfer to allow the two sides of the
link to resynchronize.

Unfortunately, resetting the CRC registers requires disabling the
SPI peripheral which must now be done on every block transfer.

Note: The last byte of the tx buffer is never sent and is assumed to
      be a place holder for the tx CRC8.
Note: The last byte of the rx buffer is expected to hold the rx CRC8.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1011 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:42 +00:00
stac
c12b7e3fed spi: tx buffer is now const
Tx buffers should not be modified.  This allows passing const data
to the transfer function.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1010 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:40 +00:00
stac
548a32f18b attitude: Rename Attitude module to AHRSComms
The Attitude module will soon be handling updates for all UAVObjects
that require data from the AHRS.  To reflect this expansion of scope,
it has been renamed to AHRSComms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1009 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:37 +00:00
stac
1425ab1786 ahrs status: Add AhrsStatus UAVObject
This object currently only holds the serial number of the attached
AHRS board.  This will be retrieved each time communications are
(re)established with the AHRS board.

This will eventually be extended to hold some statistics for OP to
AHRS comms.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1008 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:34 +00:00
stac
1bbc8381c0 heading: Add HeadingActual UAVobject
This object currently holds only the raw magnetometer readings and
an instantaneous heading calculation which are only really useful
for debugging.  The contents of this object will change often as
development progresses.

Note: The magnetometer values are often garbage due to a problem
with i2c software on the AHRS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1007 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:31 +00:00
stac
0e6294ca27 spi: remove internal pull-up from input data lines
The input data lines between the OP and AHRS boards had internal
pull-ups enabled.  This seemed to be causing issues early on
during development of the inter-board comms.  Not sure if this
is still necessary but this is how the current code was tested.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1006 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:26 +00:00
stac
e3824a6d78 ahrs spi: Add AHRS SPI link management FSM
To the outside world, the AHRS can be in one of only a few
primary states:
 Not present - AHRS is absent or non-responsive via SPI
 Inactive - Only link-level status messages are processed
 Ready - Ready to receive the next application level message
 Busy - Application level message is being processed

Internal to the AHRS, there are many more states that need to be
managed.  This FSM provides the necessary decoupling between the
ISR (which is being driven by the SPI link) and the AHRS main
processing loop which must continue to run its filters independently
of the SPI messaging rate.

With this structure, SPI messages can be received at any time but
processed at only specific points within the filter chains.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1005 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:22 +00:00
stac
89a6d6d912 ahrs spi: Add definition of OP<->AHRS SPI protocol
This defines the SPI message format as well as a few
initial messages for moving data across the link.

The v0 messages are place holders for firmware download
in the bootloader.

The v1 messages are to be used by the main application.

Note: This is not the final protocol definition.
      Subject to change without notice.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:15 +00:00
stac
3eceef43d3 spi: Connect device specific DMA IRQ handlers
Mark the device specific DMA IRQ handlers as strongly linked
aliases for the genericly named interrupt vector symbol.

Here's how this works...
 * The address of the symbol DMA1_Channel2_IRQHandler is written
   into the DMA1/Channel2 interrupt vector by the linker script.
 * The startup_*.S file specifies Default_Handler() as a weakly
   linked alias for DMA1_Channel2_IRQHandler.
 * We now override the weakly linked alias with the strongly linked
   PIOS_SPI_sdcard_irq_handler().
 * This results in the address of PIOS_SPI_sdcard_irq_handler() being
   written to the vector table for the DMA1/Channel2 interrupt.
 * The PIOS_SPI_sdcard_irq_handler() function is now called whenever
   the DMA1/Channel2 interrupt fires.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:13 +00:00
stac
b084fc4be5 alarms: Add alarm for AHRS Communications
The AHRSComms alarm will be raised whenever the OP board
is not able to communicate with the AHRS board.

The navigation software on the OP board could use this
alarm to trigger its best attempt at an emergency landing.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1002 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:11 +00:00
stac
71e491e3c1 com: mark tx buffer as const throughout API
The com layer transmit functions should provide guarantees
that they will not modify the buffer that you're transmitting.
Declaring the parameter as a pointer to const keeps the underlying
implementations honest.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:08 +00:00
stac
1cc6981ee5 attitude: Remove seq field from uavobject
The sequence number field for the attitude solution is
likely unnecessary.  Removed.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1000 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:04 +00:00
stac
4f8d81343f spi: assert on invalid SPI device
TransferByte API is simplified to either assert or
return the rx byte.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@999 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:00 +00:00
stac
1169514bf9 sd card: fix SD R1 detection
SD R1 response format is defined as any byte with the MSb
cleared.  The code was testing for any byte that was not 0xFF
which can lead to misinterpreting a byte as the response.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@998 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:20:57 +00:00
stac
5c230e734d ahrs: Turn on -Werror for AHRS build
Disallow warnings of any kind in AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@997 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:20:54 +00:00
corvus
edcf4f76f0 deleted patch file since it's no longer needed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@996 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-03 21:51:37 +00:00
corvus
e2176d3117 - renamed PiOS.x86 into PiOS.posix
- created temporary branch of OpenPilot (OpenPilot.posix) in order to test multi platform changes on hardware before committing to the main branch



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@995 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-03 21:50:13 +00:00
corvus
8cd1a494ab decrease FreeRTOS idle CPU on x86 load from 100 to 0.001 by adding call to nanosleep.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@992 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-03 09:36:01 +00:00
sambas
1a7a9aa250 flight/osd: config write retry routine, my original empty config array.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@986 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-02 18:49:42 +00:00
sambas
aa1ddca8bf flight/osd: ET osd write config work, dump format also same as write array. use with caution
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@985 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-02 14:54:04 +00:00
corvus
ad4008bc11 minIni removed from PiOS.x86
added x86 patch to subversion since JIRA is acting up



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@967 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 10:34:25 +00:00
dankers
0d38dfc745 Minini removed from PiOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@966 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 08:57:40 +00:00
dankers
e47f755c30 Minini removed from OpenPilot
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@965 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 08:57:06 +00:00
dankers
84c944b4fe Old Documentation removal, legacy from very early in the project. This information should be on the Wiki.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@962 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-01 04:44:35 +00:00
peabody124
6715565727 Make CODE_SOURCERY switch affect rm command
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@909 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-27 19:44:39 +00:00
corvus
694f7e7feb OP-85
x86 port of PiOS - including pios_com -  UDP support



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@905 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-27 14:14:07 +00:00
FredericG
55f13788de FlightBatteryState Object : Made Voltage and Current fields float
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@895 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:59:11 +00:00
FredericG
8204143f9d MKSerial: Do not generate BatteryState as this is now generated by the battery-module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@894 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:31:27 +00:00
FredericG
302be3ee6f OSD: Send battery-current info to OSD. Consumed mAh is calculated by the OSD
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@893 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-26 10:27:10 +00:00
vassilis
c74eb2f0e9 OP-26 Flight/Stabilization First release of stabilization module. Tested using FlightGear, default tuning is for the HITL simulation. Works fairly well but a number of improvements can be made to aid tuning. The ManualControl settings must be first set as you would normally do for HITL simulation, flight mode is changed using the mode channel.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@887 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-25 02:28:16 +00:00
FredericG
6ef11148b5 First version of battery module
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@882 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-24 11:10:43 +00:00
FredericG
6c40edccf2 ET OSD: WIP: dumping of config-blob to serial port
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@852 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 20:02:03 +00:00
FredericG
3bc938d45e lowered I2C timoout whne using RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 09:19:02 +00:00
FredericG
d7390a07a5 MKSerial: use AUX port
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@840 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:08:41 +00:00
FredericG
c8f818a809 Do not configure the servo outputs when ENABLE_AUX_UART
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:02:26 +00:00
FredericG
fba5164634 Enable AUX UART with ENABLE_AUX_UART in Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@838 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:01:21 +00:00
FredericG
5d9a718430 Made pios_com_num_devices const
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@837 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:59:48 +00:00
FredericG
e5c795e42b Remapped UART_AUX from PA9/10 (RX inputs) to PB6/7 (Servo output)
Rationale: (http://forums.openpilot.org/topic/800-rev-761-mkserial-adapt-to-com-usartx-pios-com-x/page__view__findpost__p__2203_)
  

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@836 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:48:59 +00:00
FredericG
eac1d8a06b No need to include telemetry.h in openpilot.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@835 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 17:43:00 +00:00
FredericG
524201d3b6 MKSerial: Complete PositionActual Obj
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@818 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-19 11:04:49 +00:00
FredericG
ceadcf49a0 OSD: Also use PositionActual object
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@817 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-19 11:02:43 +00:00
stac
20fa15c24a spi: fix block transfers
SPI block transfers were broken in commit r759.  Block
transfers are primarily used by the SD card interface so
this also broke accesses to the SD card.

SD card accesses should be fixed now.  Verified by writing
config objects in the GCS and confirming that they survived
a reboot of the OP board.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@808 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-18 04:28:32 +00:00
dankers
69d2c1b546 Add flightbatterystate to the GCS, ran uavobjgenerator on all XML files. .cpp and .h included for GCS now, uncommented out these files from the uavobjects.pro.
Moving sounds folder to shared. Some sounds will be uploaded later.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@792 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-17 10:06:51 +00:00
fredericg
369657d52e FlightBatteryState object changed
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@786 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-16 13:41:10 +00:00
fredericg
23b2771602 OP makefile, traces under dos did not work well
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@785 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-16 13:38:49 +00:00
FredericG
e3815bf8b8 OSD: start displaying real data WIP
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@765 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-14 16:50:01 +00:00
vassilis
106bdca20e Flight/Actuator Go to failsafe actuator outputs when a command is not received
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@763 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-14 02:00:16 +00:00
fredericg
0731747d84 new object: FlightBatteryState
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@762 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 17:21:31 +00:00
fredericg
4e15413fc9 MkSerial, adapt to COM_USARTX => PIOS_COM_X
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@761 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 11:18:42 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
02e0017cbb stm32 lib: declare read-only parameters as const
Many of the STM32 library functions take a pointer to an
initialization structure.  In nearly every case, this struct
is a read-only (ie. const) parameter.

It is advantageous (and good coding practice) to actually declare
read-only data as const so that the compiler can place the const data
in the .rodata section which resides in flash and doesn't consume any
RAM.  This has the added bonus advantage that it is impossible for the
running application to corrupt the read-only data.

In order to allow passing pointers to const data into the library
functions, it is essential that the function prototypes also declare
their associated read-only parameters as const.  This commit adds
the const attribute to those parameters that are actually read-only.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:15 +00:00
stac
aebc358e46 usart: use macro definitions for bit positions
No functionality changed.  Clean up only.

Changed a few of the (1 << x) constructs to use existing macro
definitions to improve code readability.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:57 +00:00
stac
8b5e1e8aea init cleanup: use irq stack during early init
No functionality changed.  Clean up only.

Make early init code (Reset_Handler) use the existing irq stack
rather than the hard-coded one.

Remove (now) unused references to the hard-coded stack.

Removed the link-time check for a minimal task stack in RAM since
FreeRTOS allocates user stacks from the heap which is already reserved
in the .bss section (as symbol xHeap).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@756 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:47 +00:00
stac
90f9e6d309 openocd: support OP and AHRS at the same time
Split the floss-jtag.cfg file into separate versions
for OP and AHRS.

Push AHRS onto non-default ports for gdb, tcl and
telnet.

Update the AHRS gdb setup script to point at the new
gdb port.

Add (commented out) example sytax to support distinguishing
between multiple floss-jtag boards that don't have serial
numbers.  Uses the usb bus address of each device as the
selector.  See this patch posted to the openocd mailing list
for how to add this functionality to openocd:
  http://lists.berlios.de/pipermail/openocd-development/2010-June/015785.html

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@755 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:30 +00:00
FredericG
f8b793e54d ET OSD, WIP. Encoding of voltage and GPS data is now known
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@750 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-12 17:44:24 +00:00
fredericg
39aaf0868a MkSerial: Adapt to GpsPosition => ActualPosition
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@744 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-11 15:54:13 +00:00
vassilis
b6160c8a9b Flight/Telemetry Avoid bunching of periodic updates by spreading them.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@739 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-11 02:24:26 +00:00
vassilis
eaa9d97939 Flight/GPS Renamed GPSObject to PositionActual and implemented field for GPS status (NoGPS, NoFix, Fix2D and Fix3D)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@734 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-10 01:28:06 +00:00
FredericG
5472d531e7 Starting OSD module for ET OSD Std
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@732 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-09 20:43:43 +00:00