/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file       pios_board.c
* @author     The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief      Defines board specific static initializers for hardware for the OpenPilot board.
* @see        The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/* 
 * This program is free software; you can redistribute it and/or modify 
 * it under the terms of the GNU General Public License as published by 
 * the Free Software Foundation; either version 3 of the License, or 
 * (at your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful, but 
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 
 * for more details.
 * 
 * You should have received a copy of the GNU General Public License along 
 * with this program; if not, write to the Free Software Foundation, Inc., 
 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include "inc/openpilot.h"
#include <pios_board_info.h>
#include <oplinksettings.h>

/*
 * Pull in the board-specific static HW definitions.
 * Including .c files is a bit ugly but this allows all of
 * the HW definitions to be const and static to limit their
 * scope.
 *
 * NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
 */
#include "../board_hw_defs.c"

#define PIOS_COM_TELEM_USB_RX_BUF_LEN 256
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 256

#define PIOS_COM_TELEM_VCP_RX_BUF_LEN 256
#define PIOS_COM_TELEM_VCP_TX_BUF_LEN 256

#define PIOS_COM_RFM22B_RF_RX_BUF_LEN 256
#define PIOS_COM_RFM22B_RF_TX_BUF_LEN 256

#define PIOS_COM_TELEM_RX_BUF_LEN 256
#define PIOS_COM_TELEM_TX_BUF_LEN 256

uint32_t pios_com_telem_usb_id = 0;
uint32_t pios_com_telem_vcp_id = 0;
uint32_t pios_com_telem_uart_main_id = 0;
uint32_t pios_com_telem_uart_flexi_id = 0;
uint32_t pios_com_telemetry_id = 0;
#if defined(PIOS_INCLUDE_PPM)
uint32_t pios_ppm_rcvr_id = 0;
#endif
#if defined(PIOS_INCLUDE_PPM_OUT)
uint32_t pios_ppm_out_id = 0;
#endif
#if defined(PIOS_INCLUDE_RFM22B)
uint32_t pios_rfm22b_id = 0;
uint32_t pios_com_rfm22b_id = 0;
uint32_t pios_com_radio_id = 0;
#endif
uint8_t *pios_uart_rx_buffer;
uint8_t *pios_uart_tx_buffer;

/**
 * PIOS_Board_Init()
 * initializes all the core subsystems on this specific hardware
 * called from System/openpilot.c
 */
void PIOS_Board_Init(void) {

	/* Delay system */
	PIOS_DELAY_Init();

#ifdef PIOS_INCLUDE_FLASH_SECTOR_SETTINGS
    uintptr_t flash_id;
    uintptr_t fs_id;
    PIOS_Flash_Internal_Init(&flash_id, &flash_internal_cfg);
    PIOS_FLASHFS_Logfs_Init(&fs_id, &flashfs_internal_cfg, &pios_internal_flash_driver, flash_id);
#elif !defined(PIOS_USE_SETTINGS_ON_SDCARD)
#error No setting storage specified. (define PIOS_USE_SETTINGS_ON_SDCARD or INCLUDE_FLASH_SECTOR_SETTINGS)
#endif

	/* Initialize UAVObject libraries */
	EventDispatcherInitialize();
	UAVObjInitialize();
	
	/* Set up the SPI interface to the rfm22b */
	if (PIOS_SPI_Init(&pios_spi_rfm22b_id, &pios_spi_rfm22b_cfg)) {
		PIOS_DEBUG_Assert(0);
	}

#ifdef PIOS_INCLUDE_WDG
	/* Initialize watchdog as early as possible to catch faults during init */
	PIOS_WDG_Init();
#endif /* PIOS_INCLUDE_WDG */

#if defined(PIOS_INCLUDE_RTC)
	/* Initialize the real-time clock and its associated tick */
	PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif /* PIOS_INCLUDE_RTC */

	OPLinkSettingsInitialize();

#if defined(PIOS_INCLUDE_LED)
	PIOS_LED_Init(&pios_led_cfg);
#endif	/* PIOS_INCLUDE_LED */

	OPLinkSettingsData oplinkSettings;

	/* IAP System Setup */
	PIOS_IAP_Init();
	// check for safe mode commands from gcs
	if(PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
	   PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
	   PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
		OPLinkSettingsGet(&oplinkSettings);
		OPLinkSettingsSetDefaults(&oplinkSettings,0);
		OPLinkSettingsSet(&oplinkSettings);
		//PIOS_EEPROM_Save((uint8_t*)&oplinkSettings, sizeof(OPLinkSettingsData));
		for (uint32_t i = 0; i < 10; i++) {
			PIOS_DELAY_WaitmS(100);
			PIOS_LED_Toggle(PIOS_LED_HEARTBEAT);
		}	
		PIOS_IAP_WriteBootCmd(0,0);
		PIOS_IAP_WriteBootCmd(1,0);
		PIOS_IAP_WriteBootCmd(2,0);
	}
	OPLinkSettingsGet(&oplinkSettings);
//#else
//	OPLinkSettingsGet(&oplinkSettings);
//#endif /* PIOS_INCLUDE_FLASH_EEPROM */

	/* Initialize the task monitor library */
	TaskMonitorInitialize();

	/* Initialize the delayed callback library */
	CallbackSchedulerInitialize();

#if defined(PIOS_INCLUDE_TIM)
	/* Set up pulse timers */
	PIOS_TIM_InitClock(&tim_1_cfg);
	PIOS_TIM_InitClock(&tim_2_cfg);
	PIOS_TIM_InitClock(&tim_3_cfg);
	PIOS_TIM_InitClock(&tim_4_cfg);
#endif	/* PIOS_INCLUDE_TIM */

	/* Initialize board specific USB data */
	PIOS_USB_BOARD_DATA_Init();


#if defined(PIOS_INCLUDE_USB_CDC)
	/* Flags to determine if various USB interfaces are advertised */
	bool usb_cdc_present = false;

	if (PIOS_USB_DESC_HID_CDC_Init()) {
		PIOS_Assert(0);
	}
	usb_cdc_present = true;
#else
	if (PIOS_USB_DESC_HID_ONLY_Init()) {
		PIOS_Assert(0);
	}
#endif

	/*Initialize the USB device */
	uint32_t pios_usb_id;
	PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg);

	/* Configure the USB HID port */
	{
		uint32_t pios_usb_hid_id;
		if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
			PIOS_Assert(0);
		}
		uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
		uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
		PIOS_Assert(rx_buffer);
		PIOS_Assert(tx_buffer);
		if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
				  rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
				  tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
			PIOS_Assert(0);
		}
	}

	/* Configure the USB virtual com port (VCP) */
#if defined(PIOS_INCLUDE_USB_CDC)
	if (usb_cdc_present)
	{
		uint32_t pios_usb_cdc_id;
		if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
			PIOS_Assert(0);
		}
		uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_VCP_RX_BUF_LEN);
		uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_VCP_TX_BUF_LEN);
		PIOS_Assert(rx_buffer);
		PIOS_Assert(tx_buffer);
		if (PIOS_COM_Init(&pios_com_telem_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
				  rx_buffer, PIOS_COM_TELEM_VCP_RX_BUF_LEN,
				  tx_buffer, PIOS_COM_TELEM_VCP_TX_BUF_LEN)) {
			PIOS_Assert(0);
		}
	}
#endif


	/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
	{
		extern const struct pios_rfm22b_cfg * PIOS_BOARD_HW_DEFS_GetRfm22Cfg (uint32_t board_revision);
		const struct pios_board_info * bdinfo = &pios_board_info_blob;
		const struct pios_rfm22b_cfg *pios_rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
		if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, pios_rfm22b_cfg->slave_num, pios_rfm22b_cfg)) {
			PIOS_Assert(0);
		}

		uint8_t *rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
		uint8_t *tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
		PIOS_Assert(rx_buffer);
		PIOS_Assert(tx_buffer);
		if (PIOS_COM_Init(&pios_com_rfm22b_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
				  rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
				  tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
			PIOS_Assert(0);
		}

		/* Set the RFM22B bindings. */
		PIOS_RFM22B_SetBindings(pios_rfm22b_id, oplinkSettings.Bindings, oplinkSettings.RemoteMainPort,
					oplinkSettings.RemoteFlexiPort, oplinkSettings.RemoteVCPPort, oplinkSettings.ComSpeed);
	}
#endif /* PIOS_INCLUDE_RFM22B */

	/* Allocate the uart buffers. */
	pios_uart_rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_RX_BUF_LEN);
	pios_uart_tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_TX_BUF_LEN);

	/* Remap AFIO pin */
	GPIO_PinRemapConfig( GPIO_Remap_SWJ_NoJTRST, ENABLE);

#ifdef PIOS_INCLUDE_ADC
	PIOS_ADC_Init();
#endif
 	PIOS_GPIO_Init();
}

void PIOS_InitUartMainPort()
{
#ifndef PIOS_RFM22B_DEBUG_ON_TELEM
	uint32_t pios_usart1_id;
	if (PIOS_USART_Init(&pios_usart1_id, &pios_usart_serial_cfg)) {
		PIOS_Assert(0);
	}
	PIOS_Assert(pios_uart_rx_buffer);
	PIOS_Assert(pios_uart_tx_buffer);
	if (PIOS_COM_Init(&pios_com_telem_uart_main_id, &pios_usart_com_driver, pios_usart1_id,
			  pios_uart_rx_buffer, PIOS_COM_TELEM_RX_BUF_LEN,
			  pios_uart_tx_buffer, PIOS_COM_TELEM_TX_BUF_LEN)) {
		PIOS_Assert(0);
	}
#endif
}

void PIOS_InitUartFlexiPort()
{
	uint32_t pios_usart3_id;
	if (PIOS_USART_Init(&pios_usart3_id, &pios_usart_telem_flexi_cfg)) {
		PIOS_Assert(0);
	}
	PIOS_Assert(pios_uart_rx_buffer);
	PIOS_Assert(pios_uart_tx_buffer);
	if (PIOS_COM_Init(&pios_com_telem_uart_flexi_id, &pios_usart_com_driver, pios_usart3_id,
			  pios_uart_rx_buffer, PIOS_COM_TELEM_RX_BUF_LEN,
			  pios_uart_tx_buffer, PIOS_COM_TELEM_TX_BUF_LEN)) {
		PIOS_Assert(0);
	}
}

void PIOS_InitPPMMainPort(bool input)
{
#if defined(PIOS_INCLUDE_PPM)
	/* PPM input is configured on the coordinator modem and output on the remote modem. */
	if (input)
	{
		uint32_t pios_ppm_id;
		PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_main_cfg);

		if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id))
			PIOS_Assert(0);
	}
	// For some reason, PPM output on the main port doesn't work.
#endif	/* PIOS_INCLUDE_PPM */
}

void PIOS_InitPPMFlexiPort(bool input)
{
#if defined(PIOS_INCLUDE_PPM)
	/* PPM input is configured on the coordinator modem and output on the remote modem. */
	if (input)
	{
		uint32_t pios_ppm_id;
		PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_flexi_cfg);

		if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id))
			PIOS_Assert(0);
	}
#if defined(PIOS_INCLUDE_PPM_OUT)
	else
	{
		PIOS_PPM_Out_Init(&pios_ppm_out_id, &pios_ppm_out_cfg);
	}
#endif	/* PIOS_INCLUDE_PPM_OUT */
#endif	/* PIOS_INCLUDE_PPM */
}

/**
 * @}
 */