/** ****************************************************************************** * @addtogroup OpenPilotModules OpenPilot Modules * @{ * @addtogroup StabilizationModule Stabilization Module * @brief Stabilization PID loops in an airframe type independent manner * @note This object updates the @ref ActuatorDesired "Actuator Desired" based on the * PID loops on the @ref AttitudeDesired "Attitude Desired" and @ref AttitudeState "Attitude State" * @{ * * @file stabilization.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010. * @brief Attitude stabilization module. * * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include "stabilization.h" #include "stabilizationsettings.h" #include "stabilizationbank.h" #include "stabilizationsettingsbank1.h" #include "stabilizationsettingsbank2.h" #include "stabilizationsettingsbank3.h" #include "actuatordesired.h" #include "ratedesired.h" #include "relaytuning.h" #include "relaytuningsettings.h" #include "stabilizationdesired.h" #include "attitudestate.h" #include "airspeedstate.h" #include "gyrostate.h" #include "flightstatus.h" #include "manualcontrolsettings.h" #include "manualcontrolcommand.h" #include "flightmodesettings.h" #include "taskinfo.h" // Math libraries #include "CoordinateConversions.h" #include "pid.h" #include "sin_lookup.h" // Includes for various stabilization algorithms #include "relay_tuning.h" #include "virtualflybar.h" // Includes for various stabilization algorithms #include "relay_tuning.h" // Private constants #define UPDATE_EXPECTED (1.0f / 666.0f) #define UPDATE_MIN 1.0e-6f #define UPDATE_MAX 1.0f #define UPDATE_ALPHA 1.0e-2f #define MAX_QUEUE_SIZE 1 #if defined(PIOS_STABILIZATION_STACK_SIZE) #define STACK_SIZE_BYTES PIOS_STABILIZATION_STACK_SIZE #else #define STACK_SIZE_BYTES 860 #endif #define TASK_PRIORITY (tskIDLE_PRIORITY + 3) // FLIGHT CONTROL priority #define FAILSAFE_TIMEOUT_MS 30 // The PID_RATE_ROLL set is used by Rate mode and the rate portion of Attitude mode // The PID_RATE set is used by the attitude portion of Attitude mode enum { PID_RATE_ROLL, PID_RATE_PITCH, PID_RATE_YAW, PID_ROLL, PID_PITCH, PID_YAW, PID_MAX }; enum { RATE_P, RATE_I, RATE_D, RATE_LIMIT, RATE_OFFSET }; enum { ATT_P, ATT_I, ATT_LIMIT, ATT_OFFSET }; // Private variables static xTaskHandle taskHandle; static StabilizationSettingsData settings; static xQueueHandle queue; float gyro_alpha = 0; float axis_lock_accum[3] = { 0, 0, 0 }; uint8_t max_axis_lock = 0; uint8_t max_axislock_rate = 0; float weak_leveling_kp = 0; uint8_t weak_leveling_max = 0; bool lowThrottleZeroIntegral; float vbar_decay = 0.991f; struct pid pids[PID_MAX]; int cur_flight_mode = -1; static float rattitude_mode_transition_stick_position; static float cruise_control_min_thrust; static float cruise_control_max_thrust; static uint8_t cruise_control_max_angle; static float cruise_control_max_power_factor; static float cruise_control_power_trim; static int8_t cruise_control_inverted_power_switch; static float cruise_control_neutral_thrust; static uint8_t cruise_control_flight_mode_switch_pos_enable[FLIGHTMODESETTINGS_FLIGHTMODEPOSITION_NUMELEM]; // Private functions static void stabilizationTask(void *parameters); static float bound(float val, float range); static void ZeroPids(void); static void SettingsUpdatedCb(UAVObjEvent *ev); static void BankUpdatedCb(UAVObjEvent *ev); static void SettingsBankUpdatedCb(UAVObjEvent *ev); /** * Module initialization */ int32_t StabilizationStart() { // Initialize variables // Create object queue queue = xQueueCreate(MAX_QUEUE_SIZE, sizeof(UAVObjEvent)); // Listen for updates. // AttitudeStateConnectQueue(queue); GyroStateConnectQueue(queue); StabilizationSettingsConnectCallback(SettingsUpdatedCb); SettingsUpdatedCb(StabilizationSettingsHandle()); StabilizationBankConnectCallback(BankUpdatedCb); StabilizationSettingsBank1ConnectCallback(SettingsBankUpdatedCb); StabilizationSettingsBank2ConnectCallback(SettingsBankUpdatedCb); StabilizationSettingsBank3ConnectCallback(SettingsBankUpdatedCb); // Start main task xTaskCreate(stabilizationTask, (signed char *)"Stabilization", STACK_SIZE_BYTES / 4, NULL, TASK_PRIORITY, &taskHandle); PIOS_TASK_MONITOR_RegisterTask(TASKINFO_RUNNING_STABILIZATION, taskHandle); #ifdef PIOS_INCLUDE_WDG PIOS_WDG_RegisterFlag(PIOS_WDG_STABILIZATION); #endif return 0; } /** * Module initialization */ int32_t StabilizationInitialize() { // Initialize variables ManualControlCommandInitialize(); ManualControlSettingsInitialize(); FlightStatusInitialize(); StabilizationDesiredInitialize(); StabilizationSettingsInitialize(); StabilizationBankInitialize(); StabilizationSettingsBank1Initialize(); StabilizationSettingsBank2Initialize(); StabilizationSettingsBank3Initialize(); ActuatorDesiredInitialize(); #ifdef DIAG_RATEDESIRED RateDesiredInitialize(); #endif #ifdef REVOLUTION AirspeedStateInitialize(); #endif // Code required for relay tuning sin_lookup_initalize(); RelayTuningSettingsInitialize(); RelayTuningInitialize(); return 0; } MODULE_INITCALL(StabilizationInitialize, StabilizationStart); /** * Module task */ static void stabilizationTask(__attribute__((unused)) void *parameters) { UAVObjEvent ev; PiOSDeltatimeConfig timeval; PIOS_DELTATIME_Init(&timeval, UPDATE_EXPECTED, UPDATE_MIN, UPDATE_MAX, UPDATE_ALPHA); ActuatorDesiredData actuatorDesired; StabilizationDesiredData stabDesired; float throttleDesired; RateDesiredData rateDesired; AttitudeStateData attitudeState; GyroStateData gyroStateData; FlightStatusData flightStatus; StabilizationBankData stabBank; #ifdef REVOLUTION AirspeedStateData airspeedState; #endif SettingsUpdatedCb((UAVObjEvent *)NULL); // Main task loop ZeroPids(); while (1) { float dT; #ifdef PIOS_INCLUDE_WDG PIOS_WDG_UpdateFlag(PIOS_WDG_STABILIZATION); #endif // Wait until the Gyro object is updated, if a timeout then go to failsafe if (xQueueReceive(queue, &ev, FAILSAFE_TIMEOUT_MS / portTICK_RATE_MS) != pdTRUE) { AlarmsSet(SYSTEMALARMS_ALARM_STABILIZATION, SYSTEMALARMS_ALARM_WARNING); continue; } dT = PIOS_DELTATIME_GetAverageSeconds(&timeval); FlightStatusGet(&flightStatus); StabilizationDesiredGet(&stabDesired); ManualControlCommandThrottleGet(&throttleDesired); AttitudeStateGet(&attitudeState); GyroStateGet(&gyroStateData); StabilizationBankGet(&stabBank); #ifdef DIAG_RATEDESIRED RateDesiredGet(&rateDesired); #endif uint8_t flight_mode_switch_position; ManualControlCommandFlightModeSwitchPositionGet(&flight_mode_switch_position); if (cur_flight_mode != flight_mode_switch_position) { cur_flight_mode = flight_mode_switch_position; SettingsBankUpdatedCb(NULL); } #ifdef REVOLUTION float speedScaleFactor; // Scale PID coefficients based on current airspeed estimation - needed for fixed wing planes AirspeedStateGet(&airspeedState); if (settings.ScaleToAirspeed < 0.1f || airspeedState.CalibratedAirspeed < 0.1f) { // feature has been turned off speedScaleFactor = 1.0f; } else { // scale the factor to be 1.0 at the specified airspeed (for example 10m/s) but scaled by 1/speed^2 speedScaleFactor = (settings.ScaleToAirspeed * settings.ScaleToAirspeed) / (airspeedState.CalibratedAirspeed * airspeedState.CalibratedAirspeed); if (speedScaleFactor < settings.ScaleToAirspeedLimits.Min) { speedScaleFactor = settings.ScaleToAirspeedLimits.Min; } if (speedScaleFactor > settings.ScaleToAirspeedLimits.Max) { speedScaleFactor = settings.ScaleToAirspeedLimits.Max; } } #else const float speedScaleFactor = 1.0f; #endif #if defined(PIOS_QUATERNION_STABILIZATION) // Quaternion calculation of error in each axis. Uses more memory. float rpy_desired[3]; float q_desired[4]; float q_error[4]; float local_error[3]; // Essentially zero errors for anything in rate or none if (stabDesired.StabilizationMode.Roll == STABILIZATIONDESIRED_STABILIZATIONMODE_ATTITUDE) { rpy_desired[0] = stabDesired.Roll; } else { rpy_desired[0] = attitudeState.Roll; } if (stabDesired.StabilizationMode.Pitch == STABILIZATIONDESIRED_STABILIZATIONMODE_ATTITUDE) { rpy_desired[1] = stabDesired.Pitch; } else { rpy_desired[1] = attitudeState.Pitch; } if (stabDesired.StabilizationMode.Yaw == STABILIZATIONDESIRED_STABILIZATIONMODE_ATTITUDE) { rpy_desired[2] = stabDesired.Yaw; } else { rpy_desired[2] = attitudeState.Yaw; } RPY2Quaternion(rpy_desired, q_desired); quat_inverse(q_desired); quat_mult(q_desired, &attitudeState.q1, q_error); quat_inverse(q_error); Quaternion2RPY(q_error, local_error); #else /* if defined(PIOS_QUATERNION_STABILIZATION) */ // Simpler algorithm for CC, less memory float local_error[3] = { stabDesired.Roll - attitudeState.Roll, stabDesired.Pitch - attitudeState.Pitch, stabDesired.Yaw - attitudeState.Yaw }; // find shortest way float modulo = fmodf(local_error[2] + 180.0f, 360.0f); if (modulo < 0) { local_error[2] = modulo + 180.0f; } else { local_error[2] = modulo - 180.0f; } #endif /* if defined(PIOS_QUATERNION_STABILIZATION) */ float gyro_filtered[3]; gyro_filtered[0] = gyro_filtered[0] * gyro_alpha + gyroStateData.x * (1 - gyro_alpha); gyro_filtered[1] = gyro_filtered[1] * gyro_alpha + gyroStateData.y * (1 - gyro_alpha); gyro_filtered[2] = gyro_filtered[2] * gyro_alpha + gyroStateData.z * (1 - gyro_alpha); float *stabDesiredAxis = &stabDesired.Roll; float *actuatorDesiredAxis = &actuatorDesired.Roll; float *rateDesiredAxis = &rateDesired.Roll; ActuatorDesiredGet(&actuatorDesired); // A flag to track which stabilization mode each axis is in static uint8_t previous_mode[MAX_AXES] = { 255, 255, 255 }; bool error = false; // Run the selected stabilization algorithm on each axis: for (uint8_t i = 0; i < MAX_AXES; i++) { // Check whether this axis mode needs to be reinitialized bool reinit = (cast_struct_to_array(stabDesired.StabilizationMode, stabDesired.StabilizationMode.Roll)[i] != previous_mode[i]); previous_mode[i] = cast_struct_to_array(stabDesired.StabilizationMode, stabDesired.StabilizationMode.Roll)[i]; // Apply the selected control law switch (cast_struct_to_array(stabDesired.StabilizationMode, stabDesired.StabilizationMode.Roll)[i]) { case STABILIZATIONDESIRED_STABILIZATIONMODE_RATE: if (reinit) { pids[PID_RATE_ROLL + i].iAccumulator = 0; } // Store to rate desired variable for storing to UAVO rateDesiredAxis[i] = bound(stabDesiredAxis[i], cast_struct_to_array(stabBank.ManualRate, stabBank.ManualRate.Roll)[i]); // Compute the inner loop actuatorDesiredAxis[i] = pid_apply_setpoint(&pids[PID_RATE_ROLL + i], speedScaleFactor, rateDesiredAxis[i], gyro_filtered[i], dT); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_ATTITUDE: if (reinit) { pids[PID_ROLL + i].iAccumulator = 0; pids[PID_RATE_ROLL + i].iAccumulator = 0; } // Compute the outer loop rateDesiredAxis[i] = pid_apply(&pids[PID_ROLL + i], local_error[i], dT); rateDesiredAxis[i] = bound(rateDesiredAxis[i], cast_struct_to_array(stabBank.MaximumRate, stabBank.MaximumRate.Roll)[i]); // Compute the inner loop actuatorDesiredAxis[i] = pid_apply_setpoint(&pids[PID_RATE_ROLL + i], speedScaleFactor, rateDesiredAxis[i], gyro_filtered[i], dT); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_RATTITUDE: // A parameterization from Attitude mode at center stick // - to Rate mode at full stick // This is done by parameterizing to use the rotation rate that Attitude mode // - would use at center stick to using the rotation rate that Rate mode // - would use at full stick in a weighted average sort of way. { if (reinit) { pids[PID_ROLL + i].iAccumulator = 0; pids[PID_RATE_ROLL + i].iAccumulator = 0; } // Compute what Rate mode would give for this stick angle's rate // Save Rate's rate in a temp for later merging with Attitude's rate float rateDesiredAxisRate; rateDesiredAxisRate = bound(stabDesiredAxis[i], 1.0f) * cast_struct_to_array(stabBank.ManualRate, stabBank.ManualRate.Roll)[i]; // Compute what Attitude mode would give for this stick angle's rate // stabDesired for this mode is [-1.0f,+1.0f] // - multiply by Attitude mode max angle to get desired angle // - subtract off the actual angle to get the angle error // This is what local_error[] holds for Attitude mode float attitude_error = stabDesiredAxis[i] * cast_struct_to_array(stabBank.RollMax, stabBank.RollMax)[i] - cast_struct_to_array(attitudeState.Roll, attitudeState.Roll)[i]; // Compute the outer loop just like Attitude mode does float rateDesiredAxisAttitude; rateDesiredAxisAttitude = pid_apply(&pids[PID_ROLL + i], attitude_error, dT); rateDesiredAxisAttitude = bound(rateDesiredAxisAttitude, cast_struct_to_array(stabBank.ManualRate, stabBank.ManualRate.Roll)[i]); // Compute the weighted average rate desired // Using max() rather than sqrt() for cpu speed; // - this makes the stick region into a square; // - this is a feature! // - hold a roll angle and add just pitch without the stick sensitivity changing // magnitude = sqrt(stabDesired.Roll*stabDesired.Roll + stabDesired.Pitch*stabDesired.Pitch); float magnitude; magnitude = fmaxf(fabsf(stabDesired.Roll), fabsf(stabDesired.Pitch)); // modify magnitude to move the Att to Rate transition to the place // specified by the user // we are looking for where the stick angle == transition angle // and the Att rate equals the Rate rate // that's where Rate x (1-StickAngle) [Attitude pulling down max X Ratt proportion] // == Rate x StickAngle [Rate pulling up according to stick angle] // * StickAngle [X Ratt proportion] // so 1-x == x*x or x*x+x-1=0 where xE(0,1) // (-1+-sqrt(1+4))/2 = (-1+sqrt(5))/2 // and quadratic formula says that is 0.618033989f // I tested 14.01 and came up with .61 without even remembering this number // I thought that moving the P,I, and maxangle terms around would change this value // and that I would have to take these into account, but varying // all P's and I's by factors of 1/2 to 2 didn't change it noticeably // and varying maxangle from 4 to 120 didn't either. // so for now I'm not taking these into account // while working with this, it occurred to me that Attitude mode, // set up with maxangle=190 would be similar to Ratt, and it is. #define STICK_VALUE_AT_MODE_TRANSITION 0.618033989f // the following assumes the transition would otherwise be at 0.618033989f // and THAT assumes that Att ramps up to max roll rate // when a small number of degrees off of where it should be // if below the transition angle (still in attitude mode) // '<=' instead of '<' keeps rattitude_mode_transition_stick_position==1.0 from causing DZ if (magnitude <= rattitude_mode_transition_stick_position) { magnitude *= STICK_VALUE_AT_MODE_TRANSITION / rattitude_mode_transition_stick_position; } else { magnitude = (magnitude - rattitude_mode_transition_stick_position) * (1.0f - STICK_VALUE_AT_MODE_TRANSITION) / (1.0f - rattitude_mode_transition_stick_position) + STICK_VALUE_AT_MODE_TRANSITION; } rateDesiredAxis[i] = (1.0f - magnitude) * rateDesiredAxisAttitude + magnitude * rateDesiredAxisRate; // Compute the inner loop for the averaged rate // actuatorDesiredAxis[i] is the weighted average actuatorDesiredAxis[i] = pid_apply_setpoint(&pids[PID_RATE_ROLL + i], speedScaleFactor, rateDesiredAxis[i], gyro_filtered[i], dT); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; } case STABILIZATIONDESIRED_STABILIZATIONMODE_VIRTUALBAR: // Store for debugging output rateDesiredAxis[i] = stabDesiredAxis[i]; // Run a virtual flybar stabilization algorithm on this axis stabilization_virtual_flybar(gyro_filtered[i], rateDesiredAxis[i], &actuatorDesiredAxis[i], dT, reinit, i, &settings); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_WEAKLEVELING: // FIXME: local_error[] is rate - attitude for Weak Leveling // The only ramifications are: // Weak Leveling Kp is off by a factor of 3 to 12 and may need a different default in GCS // Changing Rate mode max rate currently requires a change to Kp // That would be changed to Attitude mode max angle affecting Kp // Also does not take dT into account { if (reinit) { pids[PID_RATE_ROLL + i].iAccumulator = 0; } float weak_leveling = local_error[i] * weak_leveling_kp; weak_leveling = bound(weak_leveling, weak_leveling_max); // Compute desired rate as input biased towards leveling rateDesiredAxis[i] = stabDesiredAxis[i] + weak_leveling; actuatorDesiredAxis[i] = pid_apply_setpoint(&pids[PID_RATE_ROLL + i], speedScaleFactor, rateDesiredAxis[i], gyro_filtered[i], dT); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; } case STABILIZATIONDESIRED_STABILIZATIONMODE_AXISLOCK: if (reinit) { pids[PID_RATE_ROLL + i].iAccumulator = 0; } if (fabsf(stabDesiredAxis[i]) > max_axislock_rate) { // While getting strong commands act like rate mode rateDesiredAxis[i] = stabDesiredAxis[i]; axis_lock_accum[i] = 0; } else { // For weaker commands or no command simply attitude lock (almost) on no gyro change axis_lock_accum[i] += (stabDesiredAxis[i] - gyro_filtered[i]) * dT; axis_lock_accum[i] = bound(axis_lock_accum[i], max_axis_lock); rateDesiredAxis[i] = pid_apply(&pids[PID_ROLL + i], axis_lock_accum[i], dT); } rateDesiredAxis[i] = bound(rateDesiredAxis[i], cast_struct_to_array(stabBank.ManualRate, stabBank.ManualRate.Roll)[i]); actuatorDesiredAxis[i] = pid_apply_setpoint(&pids[PID_RATE_ROLL + i], speedScaleFactor, rateDesiredAxis[i], gyro_filtered[i], dT); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_RELAYRATE: // Store to rate desired variable for storing to UAVO rateDesiredAxis[i] = bound(stabDesiredAxis[i], cast_struct_to_array(stabBank.ManualRate, stabBank.ManualRate.Roll)[i]); // Run the relay controller which also estimates the oscillation parameters stabilization_relay_rate(rateDesiredAxis[i] - gyro_filtered[i], &actuatorDesiredAxis[i], i, reinit); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_RELAYATTITUDE: if (reinit) { pids[PID_ROLL + i].iAccumulator = 0; } // Compute the outer loop like attitude mode rateDesiredAxis[i] = pid_apply(&pids[PID_ROLL + i], local_error[i], dT); rateDesiredAxis[i] = bound(rateDesiredAxis[i], cast_struct_to_array(stabBank.MaximumRate, stabBank.MaximumRate.Roll)[i]); // Run the relay controller which also estimates the oscillation parameters stabilization_relay_rate(rateDesiredAxis[i] - gyro_filtered[i], &actuatorDesiredAxis[i], i, reinit); actuatorDesiredAxis[i] = bound(actuatorDesiredAxis[i], 1.0f); break; case STABILIZATIONDESIRED_STABILIZATIONMODE_NONE: actuatorDesiredAxis[i] = bound(stabDesiredAxis[i], 1.0f); break; default: error = true; break; } } if (settings.VbarPiroComp == STABILIZATIONSETTINGS_VBARPIROCOMP_TRUE) { stabilization_virtual_flybar_pirocomp(gyro_filtered[2], dT); } #ifdef DIAG_RATEDESIRED RateDesiredSet(&rateDesired); #endif // Save dT actuatorDesired.UpdateTime = dT * 1000; actuatorDesired.Thrust = stabDesired.Thrust; // modify thrust according to 1/cos(bank angle) // to maintain same altitdue with changing bank angle // but without manually adjusting thrust // do it here and all the various flight modes (e.g. Altitude Hold) can use it if (flight_mode_switch_position < FLIGHTMODESETTINGS_FLIGHTMODEPOSITION_NUMELEM && cruise_control_flight_mode_switch_pos_enable[flight_mode_switch_position] != (uint8_t)0 && cruise_control_max_power_factor > 0.0001f) { static uint8_t toggle; static float factor; float angle; // get attitude state and calculate angle // do it every 8th iteration to save CPU if ((toggle++ & 7) == 0) { // spherical right triangle // 0 <= acosf() <= Pi angle = RAD2DEG(acosf(cos_lookup_deg(attitudeState.Roll) * cos_lookup_deg(attitudeState.Pitch))); // if past the cutoff angle (60 to 180 (180 means never)) if (angle > cruise_control_max_angle) { // -1 reversed collective, 0 zero power, or 1 normal power // these are all unboosted factor = cruise_control_inverted_power_switch; } else { // avoid singularity if (angle > 89.999f && angle < 90.001f) { factor = cruise_control_max_power_factor; } else { factor = 1.0f / fabsf(cos_lookup_deg(angle)); if (factor > cruise_control_max_power_factor) { factor = cruise_control_max_power_factor; } } // factor in the power trim, no effect at 1.0, linear effect increases with factor factor = (factor - 1.0f) * cruise_control_power_trim + 1.0f; // if inverted and they want negative boost if (angle > 90.0f && cruise_control_inverted_power_switch == (int8_t)-1) { factor = -factor; // as long as thrust is getting reversed // we may as well do pitch and yaw for a complete "invert switch" actuatorDesired.Pitch = -actuatorDesired.Pitch; actuatorDesired.Yaw = -actuatorDesired.Yaw; } } } // also don't adjust thrust if <= 0, leaves neg alone and zero thrust stops motors if (actuatorDesired.Thrust > cruise_control_min_thrust) { // quad example factor of 2 at hover power of 40%: (0.4 - 0.0) * 2.0 + 0.0 = 0.8 // CP heli example factor of 2 at hover stick of 60%: (0.6 - 0.5) * 2.0 + 0.5 = 0.7 actuatorDesired.Thrust = (actuatorDesired.Thrust - cruise_control_neutral_thrust) * factor + cruise_control_neutral_thrust; if (actuatorDesired.Thrust > cruise_control_max_thrust) { actuatorDesired.Thrust = cruise_control_max_thrust; } else if (actuatorDesired.Thrust < cruise_control_min_thrust) { actuatorDesired.Thrust = cruise_control_min_thrust; } } } if (flightStatus.ControlChain.Stabilization == FLIGHTSTATUS_CONTROLCHAIN_TRUE) { ActuatorDesiredSet(&actuatorDesired); } else { // Force all axes to reinitialize when engaged for (uint8_t i = 0; i < MAX_AXES; i++) { previous_mode[i] = 255; } } if (flightStatus.Armed != FLIGHTSTATUS_ARMED_ARMED || (lowThrottleZeroIntegral && throttleDesired < 0)) { // Force all axes to reinitialize when engaged for (uint8_t i = 0; i < MAX_AXES; i++) { previous_mode[i] = 255; } } // Clear or set alarms. Done like this to prevent toggline each cycle // and hammering system alarms if (error) { AlarmsSet(SYSTEMALARMS_ALARM_STABILIZATION, SYSTEMALARMS_ALARM_ERROR); } else { AlarmsClear(SYSTEMALARMS_ALARM_STABILIZATION); } } } /** * Clear the accumulators and derivatives for all the axes */ static void ZeroPids(void) { for (uint32_t i = 0; i < PID_MAX; i++) { pid_zero(&pids[i]); } for (uint8_t i = 0; i < 3; i++) { axis_lock_accum[i] = 0.0f; } } /** * Bound input value between limits */ static float bound(float val, float range) { if (val < -range) { return -range; } else if (val > range) { return range; } return val; } static void SettingsBankUpdatedCb(__attribute__((unused)) UAVObjEvent *ev) { if (cur_flight_mode < 0 || cur_flight_mode >= FLIGHTMODESETTINGS_FLIGHTMODEPOSITION_NUMELEM) { return; } if ((ev) && ((settings.FlightModeMap[cur_flight_mode] == 0 && ev->obj != StabilizationSettingsBank1Handle()) || (settings.FlightModeMap[cur_flight_mode] == 1 && ev->obj != StabilizationSettingsBank2Handle()) || (settings.FlightModeMap[cur_flight_mode] == 2 && ev->obj != StabilizationSettingsBank3Handle()) || settings.FlightModeMap[cur_flight_mode] > 2)) { return; } StabilizationBankData bank; switch (settings.FlightModeMap[cur_flight_mode]) { case 0: StabilizationSettingsBank1Get((StabilizationSettingsBank1Data *)&bank); break; case 1: StabilizationSettingsBank2Get((StabilizationSettingsBank2Data *)&bank); break; case 2: StabilizationSettingsBank3Get((StabilizationSettingsBank3Data *)&bank); break; } StabilizationBankSet(&bank); } static void BankUpdatedCb(__attribute__((unused)) UAVObjEvent *ev) { StabilizationBankData bank; StabilizationBankGet(&bank); // this code will be needed if any other modules alter stabilizationbank /* StabilizationBankData curBank; if(flight_mode < 0) return; switch(cast_struct_to_array(settings.FlightModeMap, settings.FlightModeMap.Stabilized1)[flight_mode]) { case 0: StabilizationSettingsBank1Get((StabilizationSettingsBank1Data *) &curBank); if(memcmp(&curBank, &bank, sizeof(StabilizationBankDataPacked)) != 0) { StabilizationSettingsBank1Set((StabilizationSettingsBank1Data *) &bank); } break; case 1: StabilizationSettingsBank2Get((StabilizationSettingsBank2Data *) &curBank); if(memcmp(&curBank, &bank, sizeof(StabilizationBankDataPacked)) != 0) { StabilizationSettingsBank2Set((StabilizationSettingsBank2Data *) &bank); } break; case 2: StabilizationSettingsBank3Get((StabilizationSettingsBank3Data *) &curBank); if(memcmp(&curBank, &bank, sizeof(StabilizationBankDataPacked)) != 0) { StabilizationSettingsBank3Set((StabilizationSettingsBank3Data *) &bank); } break; default: return; //invalid bank number } */ // Set the roll rate PID constants pid_configure(&pids[PID_RATE_ROLL], bank.RollRatePID.Kp, bank.RollRatePID.Ki, bank.RollRatePID.Kd, bank.RollRatePID.ILimit); // Set the pitch rate PID constants pid_configure(&pids[PID_RATE_PITCH], bank.PitchRatePID.Kp, bank.PitchRatePID.Ki, bank.PitchRatePID.Kd, bank.PitchRatePID.ILimit); // Set the yaw rate PID constants pid_configure(&pids[PID_RATE_YAW], bank.YawRatePID.Kp, bank.YawRatePID.Ki, bank.YawRatePID.Kd, bank.YawRatePID.ILimit); // Set the roll attitude PI constants pid_configure(&pids[PID_ROLL], bank.RollPI.Kp, bank.RollPI.Ki, 0, bank.RollPI.ILimit); // Set the pitch attitude PI constants pid_configure(&pids[PID_PITCH], bank.PitchPI.Kp, bank.PitchPI.Ki, 0, bank.PitchPI.ILimit); // Set the yaw attitude PI constants pid_configure(&pids[PID_YAW], bank.YawPI.Kp, bank.YawPI.Ki, 0, bank.YawPI.ILimit); } static void SettingsUpdatedCb(__attribute__((unused)) UAVObjEvent *ev) { StabilizationSettingsGet(&settings); // Set up the derivative term pid_configure_derivative(settings.DerivativeCutoff, settings.DerivativeGamma); // Maximum deviation to accumulate for axis lock max_axis_lock = settings.MaxAxisLock; max_axislock_rate = settings.MaxAxisLockRate; // Settings for weak leveling weak_leveling_kp = settings.WeakLevelingKp; weak_leveling_max = settings.MaxWeakLevelingRate; // Whether to zero the PID integrals while thrust is low lowThrottleZeroIntegral = settings.LowThrottleZeroIntegral == STABILIZATIONSETTINGS_LOWTHROTTLEZEROINTEGRAL_TRUE; // The dT has some jitter iteration to iteration that we don't want to // make thie result unpredictable. Still, it's nicer to specify the constant // based on a time (in ms) rather than a fixed multiplier. The error between // update rates on OP (~300 Hz) and CC (~475 Hz) is negligible for this // calculation const float fakeDt = 0.0025f; if (settings.GyroTau < 0.0001f) { gyro_alpha = 0; // not trusting this to resolve to 0 } else { gyro_alpha = expf(-fakeDt / settings.GyroTau); } // Compute time constant for vbar decay term based on a tau vbar_decay = expf(-fakeDt / settings.VbarTau); // force flight mode update cur_flight_mode = -1; // Rattitude stick angle where the attitude to rate transition happens if (settings.RattitudeModeTransition < (uint8_t)10) { rattitude_mode_transition_stick_position = 10.0f / 100.0f; } else { rattitude_mode_transition_stick_position = (float)settings.RattitudeModeTransition / 100.0f; } cruise_control_min_thrust = (float)settings.CruiseControlMinThrust / 100.0f; cruise_control_max_thrust = (float)settings.CruiseControlMaxThrust / 100.0f; cruise_control_max_angle = settings.CruiseControlMaxAngle; cruise_control_max_power_factor = settings.CruiseControlMaxPowerFactor; cruise_control_power_trim = settings.CruiseControlPowerTrim / 100.0f; cruise_control_inverted_power_switch = settings.CruiseControlInvertedPowerSwitch; cruise_control_neutral_thrust = (float)settings.CruiseControlNeutralThrust / 100.0f; memcpy( cruise_control_flight_mode_switch_pos_enable, settings.CruiseControlFlightModeSwitchPosEnable, sizeof(cruise_control_flight_mode_switch_pos_enable)); } /** * @} * @} */