/** ****************************************************************************** * @addtogroup Revolution Revolution configuration files * @{ * @brief Configures the revolution board * @{ * * @file pios_board.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011. * @brief Defines board specific static initializers for hardware for the Revolution board. * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* Pull in the board-specific static HW definitions. * Including .c files is a bit ugly but this allows all of * the HW definitions to be const and static to limit their * scope. * * NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE */ #include "board_hw_defs.c" #include #include #include #include "hwsettings.h" #include "manualcontrolsettings.h" #if defined(PIOS_INCLUDE_RFM22B) // Forward declarations static void configureComCallback(OPLinkSettingsRemoteMainPortOptions main_port, OPLinkSettingsRemoteFlexiPortOptions flexi_port, OPLinkSettingsRemoteVCPPortOptions vcp_port, OPLinkSettingsComSpeedOptions com_speed); #endif /** * Sensor configurations */ #if defined(PIOS_INCLUDE_ADC) #include "pios_adc_priv.h" void PIOS_ADC_DMC_irq_handler(void); void DMA2_Stream4_IRQHandler(void) __attribute__((alias("PIOS_ADC_DMC_irq_handler"))); struct pios_adc_cfg pios_adc_cfg = { .adc_dev = ADC1, .dma = { .irq = { .flags = (DMA_FLAG_TCIF4 | DMA_FLAG_TEIF4 | DMA_FLAG_HTIF4), .init = { .NVIC_IRQChannel = DMA2_Stream4_IRQn, .NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW, .NVIC_IRQChannelSubPriority = 0, .NVIC_IRQChannelCmd = ENABLE, }, }, .rx = { .channel = DMA2_Stream4, .init = { .DMA_Channel = DMA_Channel_0, .DMA_PeripheralBaseAddr = (uint32_t) & ADC1->DR }, } }, .half_flag = DMA_IT_HTIF4, .full_flag = DMA_IT_TCIF4, }; void PIOS_ADC_DMC_irq_handler(void) { /* Call into the generic code to handle the IRQ for this specific device */ PIOS_ADC_DMA_Handler(); } #endif #if defined(PIOS_INCLUDE_HMC5883) #include "pios_hmc5883.h" static const struct pios_exti_cfg pios_exti_hmc5883_cfg __exti_config = { .vector = PIOS_HMC5883_IRQHandler, .line = EXTI_Line7, .pin = { .gpio = GPIOB, .init = { .GPIO_Pin = GPIO_Pin_7, .GPIO_Speed = GPIO_Speed_100MHz, .GPIO_Mode = GPIO_Mode_IN, .GPIO_OType = GPIO_OType_OD, .GPIO_PuPd = GPIO_PuPd_NOPULL, }, }, .irq = { .init = { .NVIC_IRQChannel = EXTI9_5_IRQn, .NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW, .NVIC_IRQChannelSubPriority = 0, .NVIC_IRQChannelCmd = ENABLE, }, }, .exti = { .init = { .EXTI_Line = EXTI_Line7, // matches above GPIO pin .EXTI_Mode = EXTI_Mode_Interrupt, .EXTI_Trigger = EXTI_Trigger_Rising, .EXTI_LineCmd = ENABLE, }, }, }; static const struct pios_hmc5883_cfg pios_hmc5883_cfg = { .exti_cfg = &pios_exti_hmc5883_cfg, .M_ODR = PIOS_HMC5883_ODR_75, .Meas_Conf = PIOS_HMC5883_MEASCONF_NORMAL, .Gain = PIOS_HMC5883_GAIN_1_9, .Mode = PIOS_HMC5883_MODE_CONTINUOUS, }; #endif /* PIOS_INCLUDE_HMC5883 */ /** * Configuration for the MS5611 chip */ #if defined(PIOS_INCLUDE_MS5611) #include "pios_ms5611.h" static const struct pios_ms5611_cfg pios_ms5611_cfg = { .oversampling = MS5611_OSR_512, }; #endif /* PIOS_INCLUDE_MS5611 */ /** * Configuration for the MPU6000 chip */ #if defined(PIOS_INCLUDE_MPU6000) #include "pios_mpu6000.h" static const struct pios_exti_cfg pios_exti_mpu6000_cfg __exti_config = { .vector = PIOS_MPU6000_IRQHandler, .line = EXTI_Line4, .pin = { .gpio = GPIOC, .init = { .GPIO_Pin = GPIO_Pin_4, .GPIO_Speed = GPIO_Speed_100MHz, .GPIO_Mode = GPIO_Mode_IN, .GPIO_OType = GPIO_OType_OD, .GPIO_PuPd = GPIO_PuPd_NOPULL, }, }, .irq = { .init = { .NVIC_IRQChannel = EXTI4_IRQn, .NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH, .NVIC_IRQChannelSubPriority = 0, .NVIC_IRQChannelCmd = ENABLE, }, }, .exti = { .init = { .EXTI_Line = EXTI_Line4, // matches above GPIO pin .EXTI_Mode = EXTI_Mode_Interrupt, .EXTI_Trigger = EXTI_Trigger_Rising, .EXTI_LineCmd = ENABLE, }, }, }; static const struct pios_mpu6000_cfg pios_mpu6000_cfg = { .exti_cfg = &pios_exti_mpu6000_cfg, .Fifo_store = PIOS_MPU6000_FIFO_TEMP_OUT | PIOS_MPU6000_FIFO_GYRO_X_OUT | PIOS_MPU6000_FIFO_GYRO_Y_OUT | PIOS_MPU6000_FIFO_GYRO_Z_OUT, // Clock at 8 khz, downsampled by 8 for 1khz .Smpl_rate_div = 11, .interrupt_cfg = PIOS_MPU6000_INT_CLR_ANYRD, .interrupt_en = PIOS_MPU6000_INTEN_DATA_RDY, .User_ctl = PIOS_MPU6000_USERCTL_FIFO_EN | PIOS_MPU6000_USERCTL_DIS_I2C, .Pwr_mgmt_clk = PIOS_MPU6000_PWRMGMT_PLL_X_CLK, .accel_range = PIOS_MPU6000_ACCEL_8G, .gyro_range = PIOS_MPU6000_SCALE_500_DEG, .filter = PIOS_MPU6000_LOWPASS_256_HZ, .orientation = PIOS_MPU6000_TOP_180DEG }; #endif /* PIOS_INCLUDE_MPU6000 */ static const struct flashfs_cfg flashfs_m25p_cfg = { .table_magic = 0x85FB3D35, .obj_magic = 0x3015A371, .obj_table_start = 0x00000010, .obj_table_end = 0x00010000, .sector_size = 0x00010000, .chip_size = 0x00200000, }; static const struct pios_flash_jedec_cfg flash_m25p_cfg = { .sector_erase = 0xD8, .chip_erase = 0xC7 }; /* One slot per selectable receiver group. * eg. PWM, PPM, GCS, SPEKTRUM1, SPEKTRUM2, SBUS * NOTE: No slot in this map for NONE. */ uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE]; #define PIOS_COM_TELEM_RF_RX_BUF_LEN 512 #define PIOS_COM_TELEM_RF_TX_BUF_LEN 512 #define PIOS_COM_GPS_RX_BUF_LEN 32 #define PIOS_COM_TELEM_USB_RX_BUF_LEN 65 #define PIOS_COM_TELEM_USB_TX_BUF_LEN 65 #define PIOS_COM_BRIDGE_RX_BUF_LEN 65 #define PIOS_COM_BRIDGE_TX_BUF_LEN 12 #define PIOS_COM_RFM22B_RF_RX_BUF_LEN 512 #define PIOS_COM_RFM22B_RF_TX_BUF_LEN 512 #if defined(PIOS_INCLUDE_DEBUG_CONSOLE) #define PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN 40 uint32_t pios_com_debug_id; #endif /* PIOS_INCLUDE_DEBUG_CONSOLE */ uint32_t pios_com_gps_id = 0; uint32_t pios_com_telem_usb_id = 0; uint32_t pios_com_telem_rf_id = 0; uint32_t pios_com_bridge_id = 0; uint32_t pios_com_overo_id = 0; #if defined(PIOS_INCLUDE_RFM22B) uint32_t pios_rfm22b_id = 0; #endif /* * Setup a com port based on the passed cfg, driver and buffer sizes. tx size of -1 make the port rx only */ static void PIOS_Board_configure_com(const struct pios_usart_cfg *usart_port_cfg, size_t rx_buf_len, size_t tx_buf_len, const struct pios_com_driver *com_driver, uint32_t *pios_com_id) { uint32_t pios_usart_id; if (PIOS_USART_Init(&pios_usart_id, usart_port_cfg)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(rx_buf_len); PIOS_Assert(rx_buffer); if(tx_buf_len!= -1){ // this is the case for rx/tx ports uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(tx_buf_len); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id, rx_buffer, rx_buf_len, tx_buffer, tx_buf_len)) { PIOS_Assert(0); } } else{ //rx only port if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id, rx_buffer, rx_buf_len, NULL, 0)) { PIOS_Assert(0); } } } static void PIOS_Board_configure_dsm(const struct pios_usart_cfg *pios_usart_dsm_cfg, const struct pios_dsm_cfg *pios_dsm_cfg, const struct pios_com_driver *pios_usart_com_driver,enum pios_dsm_proto *proto, ManualControlSettingsChannelGroupsOptions channelgroup,uint8_t *bind) { uint32_t pios_usart_dsm_id; if (PIOS_USART_Init(&pios_usart_dsm_id, pios_usart_dsm_cfg)) { PIOS_Assert(0); } uint32_t pios_dsm_id; if (PIOS_DSM_Init(&pios_dsm_id, pios_dsm_cfg, pios_usart_com_driver, pios_usart_dsm_id, *proto, *bind)) { PIOS_Assert(0); } uint32_t pios_dsm_rcvr_id; if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) { PIOS_Assert(0); } pios_rcvr_group_map[channelgroup] = pios_dsm_rcvr_id; } /** * PIOS_Board_Init() * initializes all the core subsystems on this specific hardware * called from System/openpilot.c */ #include void PIOS_Board_Init(void) { /* Delay system */ PIOS_DELAY_Init(); const struct pios_board_info * bdinfo = &pios_board_info_blob; #if defined(PIOS_INCLUDE_LED) const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev); PIOS_Assert(led_cfg); PIOS_LED_Init(led_cfg); #endif /* PIOS_INCLUDE_LED */ /* Set up the SPI interface to the gyro/acelerometer */ if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) { PIOS_DEBUG_Assert(0); } /* Set up the SPI interface to the flash and rfm22b */ if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) { PIOS_DEBUG_Assert(0); } #if defined(PIOS_INCLUDE_FLASH) /* Connect flash to the approrpiate interface and configure it */ PIOS_Flash_Jedec_Init(pios_spi_telem_flash_id, 1, &flash_m25p_cfg); PIOS_FLASHFS_Init(&flashfs_m25p_cfg); #endif /* Initialize UAVObject libraries */ EventDispatcherInitialize(); UAVObjInitialize(); HwSettingsInitialize(); #if defined(PIOS_INCLUDE_RTC) PIOS_RTC_Init(&pios_rtc_main_cfg); #endif /* Initialize the alarms library */ AlarmsInitialize(); /* Initialize the task monitor library */ TaskMonitorInitialize(); /* Set up pulse timers */ PIOS_TIM_InitClock(&tim_1_cfg); PIOS_TIM_InitClock(&tim_3_cfg); PIOS_TIM_InitClock(&tim_4_cfg); PIOS_TIM_InitClock(&tim_5_cfg); PIOS_TIM_InitClock(&tim_8_cfg); PIOS_TIM_InitClock(&tim_9_cfg); PIOS_TIM_InitClock(&tim_10_cfg); PIOS_TIM_InitClock(&tim_11_cfg); PIOS_TIM_InitClock(&tim_12_cfg); /* IAP System Setup */ PIOS_IAP_Init(); uint16_t boot_count = PIOS_IAP_ReadBootCount(); if (boot_count < 3) { PIOS_IAP_WriteBootCount(++boot_count); AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT); } else { /* Too many failed boot attempts, force hwsettings to defaults */ HwSettingsSetDefaults(HwSettingsHandle(), 0); AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL); } //PIOS_IAP_Init(); #if defined(PIOS_INCLUDE_USB) /* Initialize board specific USB data */ PIOS_USB_BOARD_DATA_Init(); /* Flags to determine if various USB interfaces are advertised */ bool usb_hid_present = false; bool usb_cdc_present = false; #if defined(PIOS_INCLUDE_USB_CDC) if (PIOS_USB_DESC_HID_CDC_Init()) { PIOS_Assert(0); } usb_hid_present = true; usb_cdc_present = true; #else if (PIOS_USB_DESC_HID_ONLY_Init()) { PIOS_Assert(0); } usb_hid_present = true; #endif uint32_t pios_usb_id; PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev)); #if defined(PIOS_INCLUDE_USB_CDC) uint8_t hwsettings_usb_vcpport; /* Configure the USB VCP port */ HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport); if (!usb_cdc_present) { /* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */ hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED; } switch (hwsettings_usb_vcpport) { case HWSETTINGS_USB_VCPPORT_DISABLED: break; case HWSETTINGS_USB_VCPPORT_USBTELEMETRY: #if defined(PIOS_INCLUDE_COM) PIOS_Board_configure_com(&pios_usb_cdc_cfg, PIOS_COM_TELEM_USB_RX_BUF_LEN, PIOS_COM_TELEM_USB_TX_BUF_LEN, &pios_usb_cdc_com_driver, &pios_com_telem_usb_id); #endif /* PIOS_INCLUDE_COM */ break; case HWSETTINGS_USB_VCPPORT_COMBRIDGE: #if defined(PIOS_INCLUDE_COM) PIOS_Board_configure_com(&pios_usb_cdc_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usb_cdc_com_driver, &pios_com_vcp_id); #endif /* PIOS_INCLUDE_COM */ break; } #endif /* PIOS_INCLUDE_USB_CDC */ #if defined(PIOS_INCLUDE_USB_HID) /* Configure the usb HID port */ uint8_t hwsettings_usb_hidport; HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport); if (!usb_hid_present) { /* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */ hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED; } switch (hwsettings_usb_hidport) { case HWSETTINGS_USB_HIDPORT_DISABLED: break; case HWSETTINGS_USB_HIDPORT_USBTELEMETRY: #if defined(PIOS_INCLUDE_COM) { uint32_t pios_usb_hid_id; if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id, rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN, tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) { PIOS_Assert(0); } } #endif /* PIOS_INCLUDE_COM */ break; } #endif /* PIOS_INCLUDE_USB_HID */ if (usb_hid_present || usb_cdc_present) { PIOS_USBHOOK_Activate(); } #endif /* PIOS_INCLUDE_USB */ /* Configure IO ports */ uint8_t hwsettings_DSMxBind; HwSettingsDSMxBindGet(&hwsettings_DSMxBind); /* Configure main USART port */ uint8_t hwsettings_mainport; HwSettingsRM_MainPortGet(&hwsettings_mainport); switch (hwsettings_mainport) { case HWSETTINGS_RM_MAINPORT_DISABLED: break; case HWSETTINGS_RM_MAINPORT_TELEMETRY: PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id); break; case HWSETTINGS_RM_MAINPORT_GPS: PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id); break; case HWSETTINGS_RM_MAINPORT_SBUS: #if defined(PIOS_INCLUDE_SBUS) { uint32_t pios_usart_sbus_id; if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) { PIOS_Assert(0); } uint32_t pios_sbus_id; if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) { PIOS_Assert(0); } uint32_t pios_sbus_rcvr_id; if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) { PIOS_Assert(0); } pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id; } #endif break; case HWSETTINGS_RM_MAINPORT_DSM2: case HWSETTINGS_RM_MAINPORT_DSMX10BIT: case HWSETTINGS_RM_MAINPORT_DSMX11BIT: { enum pios_dsm_proto proto; switch (hwsettings_mainport) { case HWSETTINGS_RM_MAINPORT_DSM2: proto = PIOS_DSM_PROTO_DSM2; break; case HWSETTINGS_RM_MAINPORT_DSMX10BIT: proto = PIOS_DSM_PROTO_DSMX10BIT; break; case HWSETTINGS_RM_MAINPORT_DSMX11BIT: proto = PIOS_DSM_PROTO_DSMX11BIT; break; default: PIOS_Assert(0); break; } // Force binding to zero on the main port hwsettings_DSMxBind = 0; //TODO: Define the various Channelgroup for Revo dsm inputs and handle here PIOS_Board_configure_dsm(&pios_usart_dsm_main_cfg, &pios_dsm_main_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT,&hwsettings_DSMxBind); } break; case HWSETTINGS_RM_MAINPORT_DEBUGCONSOLE: #if defined(PIOS_INCLUDE_DEBUG_CONSOLE) { PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id); } #endif /* PIOS_INCLUDE_DEBUG_CONSOLE */ break; case HWSETTINGS_RM_MAINPORT_COMBRIDGE: PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id); break; } /* hwsettings_rm_mainport */ if (hwsettings_mainport != HWSETTINGS_RM_MAINPORT_SBUS) { GPIO_Init(pios_sbus_cfg.inv.gpio, &pios_sbus_cfg.inv.init); GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable); } /* Configure FlexiPort */ uint8_t hwsettings_flexiport; HwSettingsRM_FlexiPortGet(&hwsettings_flexiport); switch (hwsettings_flexiport) { case HWSETTINGS_RM_FLEXIPORT_DISABLED: break; case HWSETTINGS_RM_FLEXIPORT_TELEMETRY: PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id); break; case HWSETTINGS_RM_FLEXIPORT_I2C: #if defined(PIOS_INCLUDE_I2C) { if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) { PIOS_Assert(0); } } #endif /* PIOS_INCLUDE_I2C */ break; case HWSETTINGS_RM_FLEXIPORT_GPS: PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id); break; case HWSETTINGS_RM_FLEXIPORT_DSM2: case HWSETTINGS_RM_FLEXIPORT_DSMX10BIT: case HWSETTINGS_RM_FLEXIPORT_DSMX11BIT: { enum pios_dsm_proto proto; switch (hwsettings_flexiport) { case HWSETTINGS_RM_FLEXIPORT_DSM2: proto = PIOS_DSM_PROTO_DSM2; break; case HWSETTINGS_RM_FLEXIPORT_DSMX10BIT: proto = PIOS_DSM_PROTO_DSMX10BIT; break; case HWSETTINGS_RM_FLEXIPORT_DSMX11BIT: proto = PIOS_DSM_PROTO_DSMX11BIT; break; default: PIOS_Assert(0); break; } //TODO: Define the various Channelgroup for Revo dsm inputs and handle here PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT,&hwsettings_DSMxBind); } break; case HWSETTINGS_RM_FLEXIPORT_DEBUGCONSOLE: #if defined(PIOS_INCLUDE_DEBUG_CONSOLE) { PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id); } #endif /* PIOS_INCLUDE_DEBUG_CONSOLE */ break; case HWSETTINGS_RM_FLEXIPORT_COMBRIDGE: PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id); break; } /* hwsettings_rv_flexiport */ /* Initalize the RFM22B radio COM device. */ #if defined(PIOS_INCLUDE_RFM22B) uint8_t hwsettings_radioport; HwSettingsRadioPortGet(&hwsettings_radioport); switch (hwsettings_radioport) { case HWSETTINGS_RADIOPORT_DISABLED: break; case HWSETTINGS_RADIOPORT_TELEMETRY: { extern const struct pios_rfm22b_cfg * PIOS_BOARD_HW_DEFS_GetRfm22Cfg (uint32_t board_revision); const struct pios_board_info * bdinfo = &pios_board_info_blob; const struct pios_rfm22b_cfg *pios_rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev); if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, pios_rfm22b_cfg->slave_num, pios_rfm22b_cfg)) { PIOS_Assert(0); } #ifdef PIOS_INCLUDE_RFM22B_COM uint8_t *rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN); uint8_t *tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id, rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN, tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) PIOS_Assert(0); #endif #ifdef PIOS_INCLUDE_RFM22B_RCVR if (PIOS_RFM22B_RCVR_Init(pios_rfm22b_id) != 0) PIOS_Assert(0); uint32_t pios_rfm22b_rcvr_id; if (PIOS_RCVR_Init(&pios_rfm22b_rcvr_id, &pios_rfm22b_rcvr_driver, pios_rfm22b_id)) PIOS_Assert(0); pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_OPLINK] = pios_rfm22b_rcvr_id; #endif // Set the com port configuration callback. PIOS_RFM22B_SetComConfigCallback(pios_rfm22b_id, &configureComCallback); break; } } #endif /* PIOS_INCLUDE_RFM22B */ /* Configure the receiver port*/ uint8_t hwsettings_rcvrport; HwSettingsRM_RcvrPortGet(&hwsettings_rcvrport); // switch (hwsettings_rcvrport){ case HWSETTINGS_RM_RCVRPORT_DISABLED: break; case HWSETTINGS_RM_RCVRPORT_PWM: #if defined(PIOS_INCLUDE_PWM) { /* Set up the receiver port. Later this should be optional */ uint32_t pios_pwm_id; PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg); uint32_t pios_pwm_rcvr_id; if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) { PIOS_Assert(0); } pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id; } #endif /* PIOS_INCLUDE_PWM */ break; case HWSETTINGS_RM_RCVRPORT_PPM: case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS: #if defined(PIOS_INCLUDE_PPM) { uint32_t pios_ppm_id; PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg); uint32_t pios_ppm_rcvr_id; if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) { PIOS_Assert(0); } pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id; } #endif /* PIOS_INCLUDE_PPM */ case HWSETTINGS_RM_RCVRPORT_OUTPUTS: break; } #if defined(PIOS_INCLUDE_GCSRCVR) GCSReceiverInitialize(); uint32_t pios_gcsrcvr_id; PIOS_GCSRCVR_Init(&pios_gcsrcvr_id); uint32_t pios_gcsrcvr_rcvr_id; if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) { PIOS_Assert(0); } pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id; #endif /* PIOS_INCLUDE_GCSRCVR */ #ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS switch (hwsettings_rcvrport) { case HWSETTINGS_RM_RCVRPORT_DISABLED: case HWSETTINGS_RM_RCVRPORT_PWM: case HWSETTINGS_RM_RCVRPORT_PPM: /* Set up the servo outputs */ PIOS_Servo_Init(&pios_servo_cfg); break; case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS: case HWSETTINGS_RM_RCVRPORT_OUTPUTS: //PIOS_Servo_Init(&pios_servo_rcvr_cfg); //TODO: Prepare the configurations on board_hw_defs and handle here: PIOS_Servo_Init(&pios_servo_cfg); break; } #else PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels)); #endif if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) { PIOS_DEBUG_Assert(0); } PIOS_DELAY_WaitmS(50); #if defined(PIOS_INCLUDE_ADC) PIOS_ADC_Init(&pios_adc_cfg); #endif #if defined(PIOS_INCLUDE_HMC5883) PIOS_HMC5883_Init(&pios_hmc5883_cfg); #endif #if defined(PIOS_INCLUDE_MS5611) PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id); #endif #if defined(PIOS_INCLUDE_MPU6000) PIOS_MPU6000_Init(pios_spi_gyro_id,0, &pios_mpu6000_cfg); #endif } #if defined(PIOS_INCLUDE_RFM22B) /** * Configure the radio com port based on a configuration event from the remote coordinator. * \param[in] main_port The main com port options * \param[in] flexi_port The flexi com port options * \param[in] vcp_port The USB virtual com port options * \param[in] com_speed The com port speed */ static void configureComCallback(OPLinkSettingsRemoteMainPortOptions main_port, OPLinkSettingsRemoteFlexiPortOptions flexi_port, OPLinkSettingsRemoteVCPPortOptions vcp_port, OPLinkSettingsComSpeedOptions com_speed) { uint32_t comBaud = 9600; switch (com_speed) { case OPLINKSETTINGS_COMSPEED_2400: comBaud = 2400; break; case OPLINKSETTINGS_COMSPEED_4800: comBaud = 4800; break; case OPLINKSETTINGS_COMSPEED_9600: comBaud = 9600; break; case OPLINKSETTINGS_COMSPEED_19200: comBaud = 19200; break; case OPLINKSETTINGS_COMSPEED_38400: comBaud = 38400; break; case OPLINKSETTINGS_COMSPEED_57600: comBaud = 57600; break; case OPLINKSETTINGS_COMSPEED_115200: comBaud = 115200; break; } if (PIOS_COM_TELEM_RF) { PIOS_COM_ChangeBaud(PIOS_COM_TELEM_RF, comBaud); } } #endif /** * @} * @} */