#####
 # Project: OpenPilot
 #    
 #  
 # Makefile for OpenPilot project build PiOS and the AP.
 #
 # The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
 #    
 # 
 # This program is free software; you can redistribute it and/or modify 
 # it under the terms of the GNU General Public License as published by 
 # the Free Software Foundation; either version 3 of the License, or 
 # (at your option) any later version.
 # 
 # This program is distributed in the hope that it will be useful, but 
 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
 # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 
 # for more details.
 # 
 # You should have received a copy of the GNU General Public License along 
 # with this program; if not, write to the Free Software Foundation, Inc., 
 # 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 #####


# Set developer code and compile options
# Set to YES to compile for debugging
DEBUG ?= YES

# Set to YES to use the Servo output pins for debugging via scope or logic analyser
ENABLE_DEBUG_PINS ?= NO

# Set to Yes to enable the AUX UART which is mapped on the S1 (Tx) and S2 (Rx) servo outputs  
ENABLE_AUX_UART ?= NO

#
USE_BOOTLOADER ?= NO


# Set to YES when using Code Sourcery toolchain
CODE_SOURCERY ?= NO

# Toolchain prefix (i.e arm-elf- -> arm-elf-gcc.exe)
TCHAIN_PREFIX ?= mingw32-

# Remove command is different for Code Sourcery on Windows
REMOVE_CMD ?= rm

FLASH_TOOL = OPENOCD

# YES enables -mthumb option to flags for source-files listed 
# in SRC and CPPSRC
USE_THUMB_MODE = YES

# List of modules to include
MODULES =  Telemetry Actuator Stabilization Guidance ManualControl FlightPlan
#MODULES =  Telemetry GPS ManualControl Actuator Altitude Attitude Stabilization
#MODULES = Telemetry Example
#MODULES = Telemetry MK/MKSerial

#MODULES += Osd/OsdEtStd


# MCU name, submodel and board
# - MCU used for compiler-option (-mtune)
# - MODEL used for linker-script name (-T) and passed as define
# - BOARD just passed as define (optional)
MCU      = i686
#CHIP     = STM32F103RET
#BOARD    = STM3210E_OP
ifeq ($(USE_BOOTLOADER), YES)
MODEL    = HD_BL

else
MODEL    = HD_NB
endif

# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
OUTDIR = ../../build/sitl_win32

# Target file name (without extension).
TARGET = OpenPilot

# Paths
OPSYSTEM = ./System
OPSYSTEMINC = $(OPSYSTEM)/inc
OPUAVTALK = ../UAVTalk
OPUAVTALKINC = $(OPUAVTALK)/inc
OPUAVOBJ = ../UAVObjects
OPUAVOBJINC = $(OPUAVOBJ)/inc
OPTESTS  = ./Tests
OPMODULEDIR = ../Modules
FLIGHTLIB = ../Libraries
FLIGHTLIBINC = ../Libraries/inc
PIOS = ../PiOS.win32
PIOSINC = $(PIOS)/inc
PIOSWIN32 = $(PIOS)/win32
APPLIBDIR = $(PIOSWIN32)/Libraries
RTOSDIR = $(APPLIBDIR)/FreeRTOS
RTOSSRCDIR = $(RTOSDIR)/Source
RTOSINCDIR = $(RTOSSRCDIR)/include
DOXYGENDIR = ../Doc/Doxygen
PYMITE = $(FLIGHTLIB)/PyMite
PYMITELIB = $(PYMITE)/lib
PYMITEPLAT = $(PYMITE)/platform/openpilot_sitl
PYMITETOOLS = $(PYMITE)/tools
PYMITEVM = $(PYMITE)/vm
PYMITEINC = $(PYMITEVM)
PYMITEINC += $(PYMITEPLAT)
PYMITEINC += $(OUTDIR)
FLIGHTPLANLIB = $(OPMODULEDIR)/FlightPlan/lib
FLIGHTPLANS = $(OPMODULEDIR)/FlightPlan/flightplans
UAVOBJSYNTHDIR = $(OUTDIR)/../uavobject-synthetics/flight

# List C source files here. (C dependencies are automatically generated.)
# use file-extension c for "c-only"-files

MODNAMES = $(notdir ${MODULES})   

ifndef TESTAPP

## PyMite files
SRC += $(OUTDIR)/pmlib_img.c
SRC += $(OUTDIR)/pmlib_nat.c
SRC += $(OUTDIR)/pmlibusr_img.c
SRC += $(OUTDIR)/pmlibusr_nat.c
SRC += $(wildcard ${PYMITEVM}/*.c)
SRC += $(wildcard ${PYMITEPLAT}/*.c)

## MODULES
SRC += ${foreach MOD, ${MODULES}, ${wildcard ${OPMODULEDIR}/${MOD}/*.c}}
SRC += ${OUTDIR}/InitMods.c
## OPENPILOT CORE:
SRC += ${OPMODULEDIR}/System/systemmod.c
SRC += $(OPSYSTEM)/openpilot.c
SRC += $(OPSYSTEM)/pios_board_posix.c
SRC += $(OPSYSTEM)/alarms.c
SRC += $(OPSYSTEM)/taskmonitor.c
SRC += $(OPUAVTALK)/uavtalk.c
SRC += $(OPUAVOBJ)/uavobjectmanager.c
SRC += $(UAVOBJSYNTHDIR)/uavobjectsinit.c
SRC += $(OPUAVOBJ)/eventdispatcher.c
SRC += $(FLIGHTLIB)/CoordinateConversions.c

else
## TESTCODE
SRC += $(OPTESTS)/test_common.c
SRC += $(OPTESTS)/$(TESTAPP).c
endif


## UAVOBJECTS
ifndef TESTAPP
#include $(UAVOBJSYNTHDIR)/Makefile.inc
include ./UAVObjects.inc
SRC += $(UAVOBJSRC)
CFLAGS_UAVOBJECTS = $(UAVOBJDEFINE)
endif

## PIOS Hardware (win32)
SRC += $(PIOSWIN32)/pios_sys.c
SRC += $(PIOSWIN32)/pios_led.c
SRC += $(PIOSWIN32)/pios_delay.c
SRC += $(PIOSWIN32)/pios_sdcard.c
SRC += $(PIOSWIN32)/pios_udp.c
SRC += $(PIOSWIN32)/pios_com.c
SRC += $(PIOSWIN32)/pios_servo.c
SRC += $(PIOSWIN32)/pios_wdg.c
SRC += $(PIOSWIN32)/pios_crc.c
#
## RTOS
SRC += $(RTOSSRCDIR)/list.c 
SRC += $(RTOSSRCDIR)/queue.c  
SRC += $(RTOSSRCDIR)/tasks.c
#
## RTOS Portable 
SRC += $(RTOSSRCDIR)/portable/GCC/Win32/port.c
SRC += $(RTOSSRCDIR)/portable/MemMang/heap_3.c


# List C source files here which must be compiled in ARM-Mode (no -mthumb).
# use file-extension c for "c-only"-files
## just for testing, timer.c could be compiled in thumb-mode too
SRCARM = 

# List C++ source files here.
# use file-extension .cpp for C++-files (not .C)
CPPSRC = 

# List C++ source files here which must be compiled in ARM-Mode.
# use file-extension .cpp for C++-files (not .C)
#CPPSRCARM = $(TARGET).cpp
CPPSRCARM = 


# List any extra directories to look for include files here.
#    Each directory must be seperated by a space.
EXTRAINCDIRS  = $(PIOSINC)
EXTRAINCDIRS  +=  $(OPSYSTEM)
EXTRAINCDIRS  += $(OPSYSTEMINC)
EXTRAINCDIRS  += $(OPUAVTALK)
EXTRAINCDIRS  += $(OPUAVTALKINC)
EXTRAINCDIRS  += $(OPUAVOBJ)
EXTRAINCDIRS  += $(OPUAVOBJINC)
EXTRAINCDIRS  += $(PIOS)
EXTRAINCDIRS  += $(PIOSWIN32)
EXTRAINCDIRS  += $(MININIDIR)
EXTRAINCDIRS  += $(RTOSINCDIR)
EXTRAINCDIRS  += $(APPLIBDIR)
EXTRAINCDIRS  += $(RTOSSRCDIR)/portable/GCC/Win32
EXTRAINCDIRS  += $(FLIGHTLIB)
EXTRAINCDIRS  += $(FLIGHTLIBINC)
EXTRAINCDIRS  += $(PYMITEINC)
EXTRAINCDIRS  += $(UAVOBJSYNTHDIR)

EXTRAINCDIRS += ${foreach MOD, ${MODULES}, ${OPMODULEDIR}/${MOD}/inc} ${OPMODULEDIR}/System/inc


# List any extra directories to look for library files here.
# Also add directories where the linker should search for
# includes from linker-script to the list
#     Each directory must be seperated by a space.
EXTRA_LIBDIRS = 

# Extra Libraries
#    Each library-name must be seperated by a space.
#    i.e. to link with libxyz.a, libabc.a and libefsl.a: 
#    EXTRA_LIBS = xyz abc efsl
# for newlib-lpc (file: libnewlibc-lpc.a):
#    EXTRA_LIBS = newlib-lpc
EXTRA_LIBS = WS2_32 Winmm

# Path to Linker-Scripts
LINKERSCRIPTPATH = $(PIOSSTM32F10X)

# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

ifeq ($(DEBUG),YES)
OPT = 0
else
OPT = s
endif

# Output format. (can be ihex or binary or both)
#  binary to create a load-image in raw-binary format i.e. for SAM-BA, 
#  ihex to create a load-image in Intel hex format
#LOADFORMAT = ihex
#LOADFORMAT = binary
LOADFORMAT = both

# Debugging format.
#DEBUGF = dwarf-2

# Place project-specific -D (define) and/or 
# -U options for C here.
ifeq ($(ENABLE_DEBUG_PINS), YES)
CDEFS += -DPIOS_ENABLE_DEBUG_PINS
endif
ifeq ($(ENABLE_AUX_UART), YES)
CDEFS += -DPIOS_ENABLE_AUX_UART
endif
ifeq ($(USE_BOOTLOADER), YES)
CDEFS += -DUSE_BOOTLOADER
endif



# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99

#-----

# Compiler flags.

#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
#
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)

ifeq ($(DEBUG),YES)
CFLAGS = -g
endif

CFLAGS += $(CFLAGS_UAVOBJECTS)
CFLAGS += -DARCH_WIN32
CFLAGS += -O$(OPT)
CFLAGS += -mtune=$(MCU)
CFLAGS += $(CDEFS)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.

CFLAGS += -fomit-frame-pointer
ifeq ($(CODE_SOURCERY), YES)
CFLAGS += -fpromote-loop-indices
endif

CFLAGS += -Wall 
CFLAGS += -Werror
# Compiler flags to generate dependency files:
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d

# flags only for C
#CONLYFLAGS += -Wnested-externs 
CONLYFLAGS += $(CSTANDARD)

# Assembler flags.
#  -Wa,...:    tell GCC to pass this to the assembler.
#  -ahlns:     create listing
ASFLAGS  = -mtune=$(MCU) -I. -x assembler-with-cpp
ASFLAGS += $(ADEFS)
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

MATH_LIB = -lm

# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
#LDFLAGS += -lpthread 
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
#LDFLAGS += -lc
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lgcc 




# Define programs and commands.
CC      = $(TCHAIN_PREFIX)gcc
CPP     = $(TCHAIN_PREFIX)g++
AR      = ar
OBJCOPY = objcopy
OBJDUMP = objdump
SIZE    = size
NM      = nm
REMOVE  = $(REMOVE_CMD) -f
PYTHON  = python
###SHELL   = sh
###COPY    = cp



# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = ${quote}-------- begin (mode: $(RUN_MODE)) --------${quote}
MSG_END = ${quote}--------  end  --------${quote}
MSG_MODINIT = ${quote}**** Generating ModInit.c${quote}
MSG_SIZE_BEFORE = ${quote}Size before:${quote} 
MSG_SIZE_AFTER = ${quote}Size after build:${quote}
MSG_LOAD_FILE = ${quote}Creating load file:${quote}
MSG_EXTENDED_LISTING = ${quote}Creating Extended Listing/Disassembly:${quote}
MSG_SYMBOL_TABLE = ${quote}Creating Symbol Table:${quote}
MSG_LINKING = ${quote}**** Linking :${quote}
MSG_COMPILING = ${quote}**** Compiling C :${quote}
MSG_COMPILING_ARM = ${quote}**** Compiling C (ARM-only):${quote}
MSG_COMPILINGCPP = ${quote}Compiling C++ :${quote}
MSG_COMPILINGCPP_ARM = ${quote}Compiling C++ (ARM-only):${quote}
MSG_ASSEMBLING = ${quote}**** Assembling:${quote}
MSG_ASSEMBLING_ARM = ${quote}****Assembling (ARM-only):${quote}
MSG_CLEANING = ${quote}Cleaning project:${quote}
MSG_FORMATERROR = ${quote}Can not handle output-format${quote}
MSG_ASMFROMC = ${quote}Creating asm-File from C-Source:${quote}
MSG_ASMFROMC_ARM = ${quote}Creating asm-File from C-Source (ARM-only):${quote}
MSG_PYMITEINIT = ${quote}**** Generating PyMite intermediate code${quote}

# List of all source files.
ALLSRC     = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
# List of all source files without directory and file-extension.
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))

# Define all object files.
ALLOBJ     = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))

# Define all listing files (used for make clean).
LSTFILES   = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
# Define all depedency-files (used for make clean).
DEPFILES   = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))

elf: $(OUTDIR)/$(TARGET).elf 
lss: $(OUTDIR)/$(TARGET).lss
sym: $(OUTDIR)/$(TARGET).sym
hex: $(OUTDIR)/$(TARGET).hex
bin: $(OUTDIR)/$(TARGET).bin
exe: $(OUTDIR)/$(TARGET).exe

# Default target.
#all: begin gccversion sizebefore build sizeafter finished end
#all: begin gccversion build sizeafter finished end
#all: elf
all: gencode exe

ifeq ($(LOADFORMAT),ihex)
build: elf hex lss sym
else 
ifeq ($(LOADFORMAT),binary)
build: elf bin lss sym
else 
ifeq ($(LOADFORMAT),both)
build: elf hex bin lss sym
else 
$(error "$(MSG_FORMATERROR) $(FORMAT)")
endif
endif
endif

# Test if quotes are needed for the echo-command
result = ${shell echo "test"}
ifeq (${result}, test)
	quote = '
else
	quote = 
endif

# Generate intermediate code
gencode: ${OUTDIR}/InitMods.c $(OUTDIR)/pmlib_img.c $(OUTDIR)/pmlib_nat.c $(OUTDIR)/pmlibusr_img.c $(OUTDIR)/pmlibusr_nat.c $(OUTDIR)/pmfeatures.h

${OUTDIR}/InitMods.c: Makefile.win32
	@echo ${MSG_MODINIT}
	@echo ${quote}// Autogenerated file${quote} > ${OUTDIR}/InitMods.c 
	@echo ${quote}${foreach MOD, ${MODNAMES}, extern unsigned int ${MOD}Initialize(void);}${quote}  >> ${OUTDIR}/InitMods.c
	@echo ${quote}void InitModules() {${quote} >> ${OUTDIR}/InitMods.c
	@echo ${quote}${foreach MOD, ${MODNAMES}, ${MOD}Initialize();}${quote}  >> ${OUTDIR}/InitMods.c
	@echo ${quote}}${quote} >> ${OUTDIR}/InitMods.c
	
#Generate code for PyMite
$(OUTDIR)/pmlib_img.c $(OUTDIR)/pmlib_nat.c $(OUTDIR)/pmlibusr_img.c $(OUTDIR)/pmlibusr_nat.c $(OUTDIR)/pmfeatures.h $(OPMODULEDIR)/FlightPlan/flightplan.c: $(wildcard $(PYMITELIB)/*.py) $(wildcard $(PYMITEPLAT)/*.py) $(wildcard $(FLIGHTPLANLIB)/*.py) $(wildcard $(FLIGHTPLANS)/*.py) 
	@echo ${MSG_PYMITEINIT}
	@$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -s --memspace=flash -o $(OUTDIR)/pmlib_img.c --native-file=$(OUTDIR)/pmlib_nat.c $(PYMITELIB)/list.py $(PYMITELIB)/dict.py $(PYMITELIB)/__bi.py $(PYMITELIB)/sys.py $(PYMITELIB)/string.py $(wildcard $(FLIGHTPLANLIB)/*.py)
	@$(PYTHON) $(PYMITETOOLS)/pmGenPmFeatures.py $(PYMITEPLAT)/pmfeatures.py > $(OUTDIR)/pmfeatures.h
	@$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -u -o $(OUTDIR)/pmlibusr_img.c --native-file=$(OUTDIR)/pmlibusr_nat.c $(FLIGHTPLANS)/test.py
	
# Eye candy.
begin:
##	@echo
	@echo $(MSG_BEGIN)

finished:
##	@echo $(MSG_ERRORS_NONE)

end:
	@echo $(MSG_END)
##	@echo

# Display sizes of sections.
ELFSIZE = $(SIZE) -A  $(OUTDIR)/$(TARGET).elf
##ELFSIZE = $(SIZE) --format=Berkeley --common $(OUTDIR)/$(TARGET).elf
sizebefore:
#	@if [ -f  $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi

sizeafter:
#	@if [ -f  $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
	@echo $(MSG_SIZE_AFTER)
	$(ELFSIZE)
	
# Display compiler version information.
gccversion : 
	@$(CC) --version
#	@echo $(ALLOBJ)

# Program the device.
ifeq ($(FLASH_TOOL),OPENOCD)
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
program: $(OUTDIR)/$(TARGET).elf
	@echo ${quote}Programming with OPENOCD${quote}
	$(OOCD_EXE) $(OOCD_CL)
endif

# Create final output file (.hex) from ELF output file.
%.hex: %.elf
##	@echo
	@echo $(MSG_LOAD_FILE) $@
	$(OBJCOPY) -O ihex $< $@
	
# Create final output file (.bin) from ELF output file.
%.bin: %.elf
##	@echo
	@echo $(MSG_LOAD_FILE) $@
	$(OBJCOPY) -O binary $< $@

# Create extended listing file/disassambly from ELF output file.
# using objdump testing: option -C
%.lss: %.elf
##	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S -C -r $< > $@
#	$(OBJDUMP) -x -S $< > $@

# Create a symbol table from ELF output file.
%.sym: %.elf
##	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@

# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(ALLOBJ)
%.elf:  $(ALLOBJ)
	@echo $(MSG_LINKING) $@
# use $(CC) for C-only projects or $(CPP) for C++-projects:
	$(CC) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
#	$(CPP) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)

# Link: create EXE output file from object files.
.SECONDARY : $(TARGET).exe
.PRECIOUS : $(ALLOBJ)
%.exe:  $(ALLOBJ)
	@echo $(MSG_LINKING) $@
# use $(CC) for C-only projects or $(CPP) for C++-projects:
	$(CC) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
#	$(CPP) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)

# Assemble: create object files from assembler source files.
define ASSEMBLE_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_ASSEMBLING) $$<  to  $$@
	$(CC) -c $(THUMB) $$(ASFLAGS) $$< -o $$@ 
endef
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src)))) 

# Assemble: create object files from assembler source files. ARM-only
define ASSEMBLE_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_ASSEMBLING_ARM) $$<  to  $$@
	$(CC) -c $$(ASFLAGS) $$< -o $$@ 
endef
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src)))) 


# Compile: create object files from C source files.
define COMPILE_C_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_COMPILING) $$<  to  $$@
	$(CC) -c $(THUMB) $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@ 
endef
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src)))) 

# Compile: create object files from C source files. ARM-only
define COMPILE_C_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_COMPILING_ARM) $$<  to  $$@
	$(CC) -c $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@ 
endef
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src)))) 


# Compile: create object files from C++ source files.
define COMPILE_CPP_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_COMPILINGCPP) $$<  to  $$@
	$(CC) -c $(THUMB) $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@ 
endef
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src)))) 

# Compile: create object files from C++ source files. ARM-only
define COMPILE_CPP_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
##	@echo
	@echo $(MSG_COMPILINGCPP_ARM) $$<  to  $$@
	$(CC) -c $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@ 
endef
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src)))) 


# Compile: create assembler files from C source files. ARM/Thumb
$(SRC:.c=.s) : %.s : %.c
	@echo $(MSG_ASMFROMC) $< to $@
	$(CC) $(THUMB) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@

# Compile: create assembler files from C source files. ARM only
$(SRCARM:.c=.s) : %.s : %.c
	@echo $(MSG_ASMFROMC_ARM) $< to $@
	$(CC) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@

# Generate Doxygen documents
docs:
	doxygen  $(DOXYGENDIR)/doxygen.cfg
	
# Target: clean project.
clean: begin clean_list finished end

clean_list :
##	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(OUTDIR)/$(TARGET).map
	$(REMOVE) $(OUTDIR)/$(TARGET).elf
	$(REMOVE) $(OUTDIR)/$(TARGET).hex
	$(REMOVE) $(OUTDIR)/$(TARGET).bin
	$(REMOVE) $(OUTDIR)/$(TARGET).sym
	$(REMOVE) $(OUTDIR)/$(TARGET).lss
	$(REMOVE) $(OUTDIR)/$(TARGET).exe
	$(REMOVE) $(ALLOBJ)
	$(REMOVE) $(LSTFILES)
	$(REMOVE) $(DEPFILES)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRCARM:.c=.s)
	$(REMOVE) $(CPPSRC:.cpp=.s)
	$(REMOVE) $(CPPSRCARM:.cpp=.s)


# Create output files directory
# all known MS Windows OS define the ComSpec environment variable
ifdef ComSpec
$(shell md $(OUTDIR) 2>NUL)
else
$(shell mkdir $(OUTDIR) 2>/dev/null)
endif

# Include the dependency files.
ifdef ComSpec
-include $(shell md $(OUTDIR)\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
else
-include $(shell mkdir $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
endif



# Listing of phony targets.
.PHONY : all begin gencode finish end sizebefore sizeafter gccversion \
build exe elf hex bin lss sym clean clean_list program