/** ****************************************************************************** * @addtogroup OpenPilot System OpenPilot System * @{ * @addtogroup OpenPilot Libraries OpenPilot System Libraries * @{ * @file sanitycheck.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012. * @brief Utilities to validate a flight configuration * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include // Private includes #include "inc/sanitycheck.h" // UAVOs #include #include #include /**************************** * Current checks: * 1. If a flight mode switch allows autotune and autotune module not running * 2. If airframe is a multirotor and either manual is available or a stabilization mode uses "none" ****************************/ // ! Check a stabilization mode switch position for safety static int32_t check_stabilization_settings(int index, bool multirotor); /** * Run a preflight check over the hardware configuration * and currently active modules */ int32_t configuration_check() { int32_t severity = SYSTEMALARMS_ALARM_OK; SystemAlarmsExtendedAlarmStatusOptions alarmstatus = SYSTEMALARMS_EXTENDEDALARMSTATUS_NONE; uint8_t alarmsubstatus = 0; // Get board type const struct pios_board_info *bdinfo = &pios_board_info_blob; bool coptercontrol = bdinfo->board_type == 0x04; // Classify airframe type bool multirotor = true; uint8_t airframe_type; SystemSettingsAirframeTypeGet(&airframe_type); switch (airframe_type) { case SYSTEMSETTINGS_AIRFRAMETYPE_QUADX: case SYSTEMSETTINGS_AIRFRAMETYPE_QUADP: case SYSTEMSETTINGS_AIRFRAMETYPE_HEXA: case SYSTEMSETTINGS_AIRFRAMETYPE_OCTO: case SYSTEMSETTINGS_AIRFRAMETYPE_HEXAX: case SYSTEMSETTINGS_AIRFRAMETYPE_OCTOV: case SYSTEMSETTINGS_AIRFRAMETYPE_OCTOCOAXP: case SYSTEMSETTINGS_AIRFRAMETYPE_HEXACOAX: case SYSTEMSETTINGS_AIRFRAMETYPE_TRI: case SYSTEMSETTINGS_AIRFRAMETYPE_OCTOCOAXX: multirotor = true; break; default: multirotor = false; } // For each available flight mode position sanity check the available // modes uint8_t num_modes; uint8_t modes[MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_NUMELEM]; ManualControlSettingsFlightModeNumberGet(&num_modes); ManualControlSettingsFlightModePositionGet(modes); for (uint32_t i = 0; i < num_modes; i++) { switch (modes[i]) { case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_MANUAL: if (multirotor) { severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_STABILIZED1: severity = (severity == SYSTEMALARMS_ALARM_OK) ? check_stabilization_settings(1, multirotor) : severity; break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_STABILIZED2: severity = (severity == SYSTEMALARMS_ALARM_OK) ? check_stabilization_settings(2, multirotor) : severity; break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_STABILIZED3: severity = (severity == SYSTEMALARMS_ALARM_OK) ? check_stabilization_settings(3, multirotor) : severity; break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_AUTOTUNE: if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_AUTOTUNE)) { severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_ALTITUDEHOLD: case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_ALTITUDEVARIO: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_ALTITUDEHOLD)) { // Revo supports altitude hold severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_VELOCITYCONTROL: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports altitude hold severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_POSITIONHOLD: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports Position Hold severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_LAND: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports AutoLand Mode severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_POI: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports POI Mode severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_PATHPLANNER: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports PathPlanner severity = SYSTEMALARMS_ALARM_ERROR; } break; case MANUALCONTROLSETTINGS_FLIGHTMODEPOSITION_RETURNTOBASE: if (coptercontrol) { severity = SYSTEMALARMS_ALARM_ERROR; } else if (!PIOS_TASK_MONITOR_IsRunning(TASKINFO_RUNNING_PATHFOLLOWER)) { // Revo supports ReturnToBase severity = SYSTEMALARMS_ALARM_ERROR; } break; default: // Uncovered modes are automatically an error severity = SYSTEMALARMS_ALARM_ERROR; } // mark the first encountered erroneous setting in status and substatus if ((severity != SYSTEMALARMS_ALARM_OK) && (alarmstatus == SYSTEMALARMS_EXTENDEDALARMSTATUS_NONE)) { alarmstatus = SYSTEMALARMS_EXTENDEDALARMSTATUS_FLIGHTMODE; alarmsubstatus = i; } } // TODO: Check on a multirotor no axis supports "None" if (severity != SYSTEMALARMS_ALARM_OK) { ExtendedAlarmsSet(SYSTEMALARMS_ALARM_SYSTEMCONFIGURATION, severity, alarmstatus, alarmsubstatus); } else { AlarmsClear(SYSTEMALARMS_ALARM_SYSTEMCONFIGURATION); } return 0; } /** * Checks the stabiliation settings for a paritcular mode and makes * sure it is appropriate for the airframe * @param[in] index Which stabilization mode to check * @returns SYSTEMALARMS_ALARM_OK or SYSTEMALARMS_ALARM_ERROR */ static int32_t check_stabilization_settings(int index, bool multirotor) { // Make sure the modes have identical sizes if (MANUALCONTROLSETTINGS_STABILIZATION1SETTINGS_NUMELEM != MANUALCONTROLSETTINGS_STABILIZATION2SETTINGS_NUMELEM || MANUALCONTROLSETTINGS_STABILIZATION1SETTINGS_NUMELEM != MANUALCONTROLSETTINGS_STABILIZATION3SETTINGS_NUMELEM) { return SYSTEMALARMS_ALARM_ERROR; } uint8_t modes[MANUALCONTROLSETTINGS_STABILIZATION1SETTINGS_NUMELEM]; // Get the different axis modes for this switch position switch (index) { case 1: ManualControlSettingsStabilization1SettingsGet(modes); break; case 2: ManualControlSettingsStabilization2SettingsGet(modes); break; case 3: ManualControlSettingsStabilization3SettingsGet(modes); break; default: return SYSTEMALARMS_ALARM_ERROR; } // For multirotors verify that nothing is set to "none" if (multirotor) { for (uint32_t i = 0; i < NELEMENTS(modes); i++) { if (modes[i] == MANUALCONTROLSETTINGS_STABILIZATION1SETTINGS_NONE) { return SYSTEMALARMS_ALARM_ERROR; } } } // Warning: This assumes that certain conditions in the XML file are met. That // MANUALCONTROLSETTINGS_STABILIZATION1SETTINGS_NONE has the same numeric value for each channel // and is the same for STABILIZATIONDESIRED_STABILIZATIONMODE_NONE return SYSTEMALARMS_ALARM_OK; }