/** ****************************************************************************** * @addtogroup Revolution Revolution configuration files * @{ * @brief Configures the revolution board * @{ * * @file pios_board.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011. * @brief Defines board specific static initializers for hardware for the Revolution board. * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "inc/openpilot.h" #include #include #include #include #include /* * Pull in the board-specific static HW definitions. * Including .c files is a bit ugly but this allows all of * the HW definitions to be const and static to limit their * scope. * * NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE */ #include "../board_hw_defs.c" /** * Sensor configurations */ /* One slot per selectable receiver group. * eg. PWM, PPM, GCS, SPEKTRUM1, SPEKTRUM2, SBUS * NOTE: No slot in this map for NONE. */ uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE]; #define PIOS_COM_TELEM_RF_RX_BUF_LEN 512 #define PIOS_COM_TELEM_RF_TX_BUF_LEN 512 #define PIOS_COM_GPS_RX_BUF_LEN 32 #define PIOS_COM_TELEM_USB_RX_BUF_LEN 65 #define PIOS_COM_TELEM_USB_TX_BUF_LEN 65 #define PIOS_COM_BRIDGE_RX_BUF_LEN 65 #define PIOS_COM_BRIDGE_TX_BUF_LEN 12 #define PIOS_COM_AUX_RX_BUF_LEN 512 #define PIOS_COM_AUX_TX_BUF_LEN 512 uint32_t pios_com_aux_id = 0; uint32_t pios_com_gps_id = 0; uint32_t pios_com_telem_usb_id = 0; uint32_t pios_com_telem_rf_id = 0; uint32_t pios_com_bridge_id = 0; uintptr_t pios_uavo_settings_fs_id; /* * Setup a com port based on the passed cfg, driver and buffer sizes. tx size of -1 make the port rx only */ static void PIOS_Board_configure_com(const struct pios_udp_cfg *usart_port_cfg, size_t rx_buf_len, size_t tx_buf_len, const struct pios_com_driver *com_driver, uint32_t *pios_com_id) { uint32_t pios_usart_id; if (PIOS_UDP_Init(&pios_usart_id, usart_port_cfg)) { PIOS_Assert(0); } uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(rx_buf_len); PIOS_Assert(rx_buffer); if (tx_buf_len != -1) { // this is the case for rx/tx ports uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(tx_buf_len); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id, rx_buffer, rx_buf_len, tx_buffer, tx_buf_len)) { PIOS_Assert(0); } } else { // rx only port if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id, rx_buffer, rx_buf_len, NULL, 0)) { PIOS_Assert(0); } } } /** * PIOS_Board_Init() * initializes all the core subsystems on this specific hardware * called from System/openpilot.c */ void PIOS_Board_Init(void) { /* Delay system */ PIOS_DELAY_Init(); /* Initialize the task monitor */ if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) { PIOS_Assert(0); } /* Initialize UAVObject libraries */ EventDispatcherInitialize(); UAVObjInitialize(); HwSettingsInitialize(); UAVObjectsInitializeAll(); /* Initialize the alarms library */ AlarmsInitialize(); /* Initialize the delayed callback library */ CallbackSchedulerInitialize(); /* Configure IO ports */ /* Configure Telemetry port */ uint8_t hwsettings_rv_telemetryport; HwSettingsRV_TelemetryPortGet(&hwsettings_rv_telemetryport); switch (hwsettings_rv_telemetryport) { case HWSETTINGS_RV_TELEMETRYPORT_DISABLED: break; case HWSETTINGS_RV_TELEMETRYPORT_TELEMETRY: PIOS_Board_configure_com(&pios_udp_telem_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_telem_rf_id); break; case HWSETTINGS_RV_TELEMETRYPORT_COMAUX: PIOS_Board_configure_com(&pios_udp_telem_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_aux_id); break; } /* hwsettings_rv_telemetryport */ /* Configure GPS port */ uint8_t hwsettings_rv_gpsport; HwSettingsRV_GPSPortGet(&hwsettings_rv_gpsport); switch (hwsettings_rv_gpsport) { case HWSETTINGS_RV_GPSPORT_DISABLED: break; case HWSETTINGS_RV_GPSPORT_TELEMETRY: PIOS_Board_configure_com(&pios_udp_gps_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_telem_rf_id); break; case HWSETTINGS_RV_GPSPORT_GPS: PIOS_Board_configure_com(&pios_udp_gps_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_udp_com_driver, &pios_com_gps_id); break; case HWSETTINGS_RV_GPSPORT_COMAUX: PIOS_Board_configure_com(&pios_udp_gps_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_aux_id); break; } /* hwsettings_rv_gpsport */ /* Configure AUXPort */ uint8_t hwsettings_rv_auxport; HwSettingsRV_AuxPortGet(&hwsettings_rv_auxport); switch (hwsettings_rv_auxport) { case HWSETTINGS_RV_AUXPORT_DISABLED: break; case HWSETTINGS_RV_AUXPORT_TELEMETRY: PIOS_Board_configure_com(&pios_udp_aux_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_telem_rf_id); break; case HWSETTINGS_RV_AUXPORT_COMAUX: PIOS_Board_configure_com(&pios_udp_aux_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_udp_com_driver, &pios_com_aux_id); break; break; } /* hwsettings_rv_auxport */ } /** * @} * @} */