/**
*****************************************************************************
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
* @author PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @brief Defines board specific static initializers for hardware for the revolution board.
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "inc/openpilot.h"
#include <pios_board_info.h>
#include <uavobjectsinit.h>
#include <hwsettings.h>
#include <manualcontrolsettings.h>
#include <taskinfo.h>
/*
* Pull in the board-specific static HW definitions.
* Including .c files is a bit ugly but this allows all of
* the HW definitions to be const and static to limit their
* scope.
*
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
*/
#include "../board_hw_defs.c"
/**
* Sensor configurations
*/
#if defined(PIOS_INCLUDE_ADC)
#include "pios_adc_priv.h"
void PIOS_ADC_DMC_irq_handler(void);
void DMA2_Stream4_IRQHandler(void) __attribute__((alias("PIOS_ADC_DMC_irq_handler")));
struct pios_adc_cfg pios_adc_cfg = {
.adc_dev = ADC1,
.dma = {
.irq = {
.flags = (DMA_FLAG_TCIF4 | DMA_FLAG_TEIF4 | DMA_FLAG_HTIF4),
.init = {
.NVIC_IRQChannel = DMA2_Stream4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA2_Stream4,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR
},
}
},
.half_flag = DMA_IT_HTIF4,
.full_flag = DMA_IT_TCIF4,
};
void PIOS_ADC_DMC_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_ADC_DMA_Handler();
}
#endif /* if defined(PIOS_INCLUDE_ADC) */
#if defined(PIOS_INCLUDE_HMC5X83)
#include "pios_hmc5x83.h"
pios_hmc5x83_dev_t onboard_mag = 0;
bool pios_board_internal_mag_handler()
{
return PIOS_HMC5x83_IRQHandler(onboard_mag);
}
static const struct pios_exti_cfg pios_exti_hmc5x83_cfg __exti_config = {
.vector = pios_board_internal_mag_handler,
.line = EXTI_Line5,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI9_5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line5, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_hmc5x83_cfg pios_hmc5x83_cfg = {
.exti_cfg = &pios_exti_hmc5x83_cfg,
.M_ODR = PIOS_HMC5x83_ODR_75,
.Meas_Conf = PIOS_HMC5x83_MEASCONF_NORMAL,
.Gain = PIOS_HMC5x83_GAIN_1_9,
.Mode = PIOS_HMC5x83_MODE_CONTINUOUS,
.Driver = &PIOS_HMC5x83_I2C_DRIVER,
.Orientation = PIOS_HMC5X83_ORIENTATION_EAST_NORTH_UP,
};
#endif /* PIOS_INCLUDE_HMC5X83 */
/**
* Configuration for the MS5611 chip
*/
#if defined(PIOS_INCLUDE_MS5611)
#include "pios_ms5611.h"
static const struct pios_ms5611_cfg pios_ms5611_cfg = {
.oversampling = MS5611_OSR_4096,
};
#endif /* PIOS_INCLUDE_MS5611 */
/**
* Configuration for the BMA180 chip
*/
#if defined(PIOS_INCLUDE_BMA180)
#include "pios_bma180.h"
static const struct pios_exti_cfg pios_exti_bma180_cfg __exti_config = {
.vector = PIOS_BMA180_IRQHandler,
.line = EXTI_Line4,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line4, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_bma180_cfg pios_bma180_cfg = {
.exti_cfg = &pios_exti_bma180_cfg,
.bandwidth = BMA_BW_600HZ,
.range = BMA_RANGE_8G,
};
#endif /* PIOS_INCLUDE_BMA180 */
/**
* Configuration for the MPU6000 chip
*/
#if defined(PIOS_INCLUDE_MPU6000)
#include "pios_mpu6000.h"
#include "pios_mpu6000_config.h"
static const struct pios_exti_cfg pios_exti_mpu6000_cfg __exti_config = {
.vector = PIOS_MPU6000_IRQHandler,
.line = EXTI_Line8,
.pin = {
.gpio = GPIOD,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI9_5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line8, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_mpu6000_cfg pios_mpu6000_cfg = {
.exti_cfg = &pios_exti_mpu6000_cfg,
.Fifo_store = PIOS_MPU6000_FIFO_TEMP_OUT | PIOS_MPU6000_FIFO_GYRO_X_OUT | PIOS_MPU6000_FIFO_GYRO_Y_OUT | PIOS_MPU6000_FIFO_GYRO_Z_OUT,
// Clock at 8 khz
.Smpl_rate_div_no_dlp = 0,
// with dlp on output rate is 1000Hz
.Smpl_rate_div_dlp = 0,
.interrupt_cfg = PIOS_MPU6000_INT_CLR_ANYRD,
.interrupt_en = PIOS_MPU6000_INTEN_DATA_RDY,
.User_ctl = PIOS_MPU6000_USERCTL_DIS_I2C,
.Pwr_mgmt_clk = PIOS_MPU6000_PWRMGMT_PLL_X_CLK,
.accel_range = PIOS_MPU6000_ACCEL_8G,
.gyro_range = PIOS_MPU6000_SCALE_2000_DEG,
.filter = PIOS_MPU6000_LOWPASS_256_HZ,
.orientation = PIOS_MPU6000_TOP_0DEG,
.fast_prescaler = PIOS_SPI_PRESCALER_4,
.std_prescaler = PIOS_SPI_PRESCALER_64,
.max_downsample = 16,
};
#endif /* PIOS_INCLUDE_MPU6000 */
/**
* Configuration for L3GD20 chip
*/
#if defined(PIOS_INCLUDE_L3GD20)
#include "pios_l3gd20.h"
static const struct pios_exti_cfg pios_exti_l3gd20_cfg __exti_config = {
.vector = PIOS_L3GD20_IRQHandler,
.line = EXTI_Line8,
.pin = {
.gpio = GPIOD,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI9_5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line8, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_l3gd20_cfg pios_l3gd20_cfg = {
.exti_cfg = &pios_exti_l3gd20_cfg,
.range = PIOS_L3GD20_SCALE_500_DEG,
};
#endif /* PIOS_INCLUDE_L3GD20 */
/* One slot per selectable receiver group.
* eg. PWM, PPM, GCS, SPEKTRUM1, SPEKTRUM2, SBUS
* NOTE: No slot in this map for NONE.
*/
uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE];
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 512
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 512
#define PIOS_COM_GPS_RX_BUF_LEN 32
#define PIOS_COM_TELEM_USB_RX_BUF_LEN 65
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 65
#define PIOS_COM_BRIDGE_RX_BUF_LEN 65
#define PIOS_COM_BRIDGE_TX_BUF_LEN 12
#define PIOS_COM_AUX_RX_BUF_LEN 512
#define PIOS_COM_AUX_TX_BUF_LEN 512
#define PIOS_COM_HKOSD_RX_BUF_LEN 22
#define PIOS_COM_HKOSD_TX_BUF_LEN 22
uint32_t pios_com_aux_id = 0;
uint32_t pios_com_gps_id = 0;
uint32_t pios_com_telem_usb_id = 0;
uint32_t pios_com_telem_rf_id = 0;
uint32_t pios_com_bridge_id = 0;
uint32_t pios_com_overo_id = 0;
uint32_t pios_com_hkosd_id = 0;
uintptr_t pios_uavo_settings_fs_id;
uintptr_t pios_user_fs_id;
uint32_t pios_com_vcp_id = 0;
/*
* Setup a com port based on the passed cfg, driver and buffer sizes. tx size of -1 make the port rx only
*/
static void PIOS_Board_configure_com(const struct pios_usart_cfg *usart_port_cfg, size_t rx_buf_len, size_t tx_buf_len,
const struct pios_com_driver *com_driver, uint32_t *pios_com_id)
{
uint32_t pios_usart_id;
if (PIOS_USART_Init(&pios_usart_id, usart_port_cfg)) {
PIOS_Assert(0);
}
uint8_t *rx_buffer = (uint8_t *)pios_malloc(rx_buf_len);
PIOS_Assert(rx_buffer);
if (tx_buf_len != (size_t)-1) { // this is the case for rx/tx ports
uint8_t *tx_buffer = (uint8_t *)pios_malloc(tx_buf_len);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
rx_buffer, rx_buf_len,
tx_buffer, tx_buf_len)) {
PIOS_Assert(0);
}
} else { // rx only port
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
rx_buffer, rx_buf_len,
NULL, 0)) {
PIOS_Assert(0);
}
}
}
static void PIOS_Board_configure_dsm(const struct pios_usart_cfg *pios_usart_dsm_cfg, const struct pios_dsm_cfg *pios_dsm_cfg,
const struct pios_com_driver *usart_com_driver,
ManualControlSettingsChannelGroupsOptions channelgroup, uint8_t *bind)
{
uint32_t pios_usart_dsm_id;
if (PIOS_USART_Init(&pios_usart_dsm_id, pios_usart_dsm_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_id;
if (PIOS_DSM_Init(&pios_dsm_id, pios_dsm_cfg, usart_com_driver,
pios_usart_dsm_id, *bind)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_rcvr_id;
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[channelgroup] = pios_dsm_rcvr_id;
}
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
#include <pios_board_info.h>
void PIOS_Board_Init(void)
{
const struct pios_board_info *bdinfo = &pios_board_info_blob;
/* Delay system */
PIOS_DELAY_Init();
PIOS_LED_Init(&pios_led_cfg);
/* Connect flash to the appropriate interface and configure it */
uintptr_t flash_id;
// initialize the internal settings storage flash
if (PIOS_Flash_Internal_Init(&flash_id, &flash_internal_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_internal_cfg, &pios_internal_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the accelerometer*/
if (PIOS_SPI_Init(&pios_spi_accel_id, &pios_spi_accel_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the gyro */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if !defined(PIOS_FLASH_ON_ACCEL)
/* Set up the SPI interface to the flash */
if (PIOS_SPI_Init(&pios_spi_flash_id, &pios_spi_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Connect flash to the appropriate interface and configure it */
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_flash_id, 0)) {
PIOS_DEBUG_Assert(0);
}
#else
/* Connect flash to the appropriate interface and configure it */
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_accel_id, 1)) {
PIOS_DEBUG_Assert(0);
}
#endif
if (PIOS_FLASHFS_Logfs_Init(&pios_user_fs_id, &flashfs_external_cfg, &pios_jedec_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* IAP System Setup */
PIOS_IAP_Init();
// check for safe mode commands from gcs
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
PIOS_IAP_WriteBootCmd(0, 0);
PIOS_IAP_WriteBootCmd(1, 0);
PIOS_IAP_WriteBootCmd(2, 0);
}
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSettingsInitialize();
/* Initialize the alarms library */
AlarmsInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_10_cfg);
PIOS_TIM_InitClock(&tim_11_cfg);
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
// PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg);
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hwsettings_usb_vcpport;
/* Configure the USB VCP port */
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
}
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hwsettings_usb_vcpport) {
case HWSETTINGS_USB_VCPPORT_DISABLED:
break;
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hwsettings_usb_hidport;
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
}
switch (hwsettings_usb_hidport) {
case HWSETTINGS_USB_HIDPORT_DISABLED:
break;
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
uint8_t hwsettings_DSMxBind;
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
/* Configure Telemetry port */
uint8_t hwsettings_rv_telemetryport;
HwSettingsRV_TelemetryPortGet(&hwsettings_rv_telemetryport);
switch (hwsettings_rv_telemetryport) {
case HWSETTINGS_RV_TELEMETRYPORT_DISABLED:
break;
case HWSETTINGS_RV_TELEMETRYPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RV_TELEMETRYPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_TELEMETRYPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hwsettings_rv_telemetryport */
/* Configure GPS port */
uint8_t hwsettings_rv_gpsport;
HwSettingsRV_GPSPortGet(&hwsettings_rv_gpsport);
switch (hwsettings_rv_gpsport) {
case HWSETTINGS_RV_GPSPORT_DISABLED:
break;
case HWSETTINGS_RV_GPSPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RV_GPSPORT_GPS:
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RV_GPSPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_GPSPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hwsettings_rv_gpsport */
/* Configure AUXPort */
uint8_t hwsettings_rv_auxport;
HwSettingsRV_AuxPortGet(&hwsettings_rv_auxport);
switch (hwsettings_rv_auxport) {
case HWSETTINGS_RV_AUXPORT_DISABLED:
break;
case HWSETTINGS_RV_AUXPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RV_AUXPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_aux_cfg, &pios_dsm_aux_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RV_AUXPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_AUXPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RV_AUXPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_aux_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rv_auxport */
/* Configure AUXSbusPort */
// TODO: ensure that the serial invertion pin is setted correctly
uint8_t hwsettings_rv_auxsbusport;
HwSettingsRV_AuxSBusPortGet(&hwsettings_rv_auxsbusport);
switch (hwsettings_rv_auxsbusport) {
case HWSETTINGS_RV_AUXSBUSPORT_DISABLED:
break;
case HWSETTINGS_RV_AUXSBUSPORT_SBUS:
#ifdef PIOS_INCLUDE_SBUS
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_auxsbus_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif /* PIOS_INCLUDE_SBUS */
break;
case HWSETTINGS_RV_AUXSBUSPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_auxsbus_cfg, &pios_dsm_auxsbus_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RV_AUXSBUSPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_AUXSBUSPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RV_AUXSBUSPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_auxsbus_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rv_auxport */
/* Configure FlexiPort */
uint8_t hwsettings_rv_flexiport;
HwSettingsRV_FlexiPortGet(&hwsettings_rv_flexiport);
switch (hwsettings_rv_flexiport) {
case HWSETTINGS_RV_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_RV_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWSETTINGS_RV_FLEXIPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RV_FLEXIPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hwsettings_rv_flexiport */
/* Configure the receiver port*/
uint8_t hwsettings_rcvrport;
HwSettingsRV_RcvrPortGet(&hwsettings_rcvrport);
//
switch (hwsettings_rcvrport) {
case HWSETTINGS_RV_RCVRPORT_DISABLED:
break;
case HWSETTINGS_RV_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
{
/* Set up the receiver port. Later this should be optional */
uint32_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg);
uint32_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_RV_RCVRPORT_PPM:
case HWSETTINGS_RV_RCVRPORT_PPMOUTPUTS:
#if defined(PIOS_INCLUDE_PPM)
{
uint32_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uint32_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PPM */
case HWSETTINGS_RV_RCVRPORT_OUTPUTS:
break;
}
#if defined(PIOS_OVERO_SPI)
/* Set up the SPI based PIOS_COM interface to the overo */
{
HwSettingsData hwSettings;
HwSettingsGet(&hwSettings);
if (hwSettings.OptionalModules.Overo == HWSETTINGS_OPTIONALMODULES_ENABLED) {
if (PIOS_OVERO_Init(&pios_overo_id, &pios_overo_cfg)) {
PIOS_DEBUG_Assert(0);
}
const uint32_t PACKET_SIZE = 1024;
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PACKET_SIZE);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PACKET_SIZE);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_overo_id, &pios_overo_com_driver, pios_overo_id,
rx_buffer, PACKET_SIZE,
tx_buffer, PACKET_SIZE)) {
PIOS_Assert(0);
}
}
}
#endif /* if defined(PIOS_OVERO_SPI) */
#if defined(PIOS_INCLUDE_HCSR04)
{
PIOS_TIM_InitClock(&tim_8_cfg);
uint32_t pios_hcsr04_id;
PIOS_HCSR04_Init(&pios_hcsr04_id, &pios_hcsr04_cfg);
}
#endif
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifndef PIOS_ENABLE_DEBUG_PINS
switch (hwsettings_rcvrport) {
case HWSETTINGS_RV_RCVRPORT_DISABLED:
case HWSETTINGS_RV_RCVRPORT_PWM:
case HWSETTINGS_RV_RCVRPORT_PPM:
/* Set up the servo outputs */
PIOS_Servo_Init(&pios_servo_cfg);
break;
case HWSETTINGS_RV_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RV_RCVRPORT_OUTPUTS:
// PIOS_Servo_Init(&pios_servo_rcvr_cfg);
// TODO: Prepare the configurations on board_hw_defs and handle here:
PIOS_Servo_Init(&pios_servo_cfg);
break;
}
#else
PIOS_DEBUG_Init(pios_tim_servoport_all_pins, NELEMENTS(pios_tim_servoport_all_pins));
#endif
if (PIOS_I2C_Init(&pios_i2c_mag_adapter_id, &pios_i2c_mag_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_I2C_Init(&pios_i2c_pressure_adapter_id, &pios_i2c_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
#if defined(PIOS_INCLUDE_HMC5X83)
onboard_mag = PIOS_HMC5x83_Init(&pios_hmc5x83_cfg, pios_i2c_mag_adapter_id, 0);
PIOS_HMC5x83_Register(onboard_mag);
#endif
#if defined(PIOS_INCLUDE_MS5611)
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_pressure_adapter_id);
PIOS_MS5611_Register();
#endif
switch (bdinfo->board_rev) {
case 0x01:
#if defined(PIOS_INCLUDE_L3GD20)
PIOS_Assert(0); // L3gd20 has not been ported to Sensor framework!!!
PIOS_L3GD20_Init(pios_spi_gyro_id, 0, &pios_l3gd20_cfg);
PIOS_Assert(PIOS_L3GD20_Test() == 0);
#endif
#if defined(PIOS_INCLUDE_BMA180)
PIOS_Assert(0); // BMA180 has not been ported to Sensor framework!!!
PIOS_BMA180_Init(pios_spi_accel_id, 0, &pios_bma180_cfg);
PIOS_Assert(PIOS_BMA180_Test() == 0);
#endif
break;
case 0x02:
#if defined(PIOS_INCLUDE_MPU6000)
PIOS_MPU6000_Init(pios_spi_gyro_id, 0, &pios_mpu6000_cfg);
PIOS_MPU6000_CONFIG_Configure();
PIOS_MPU6000_Register();
#endif
break;
default:
PIOS_DEBUG_Assert(0);
}
#ifdef PIOS_INCLUDE_ADC
{
uint8_t adc_config[HWSETTINGS_ADCROUTING_NUMELEM];
HwSettingsADCRoutingArrayGet(adc_config);
for (uint32_t i = 0; i < HWSETTINGS_ADCROUTING_NUMELEM; i++) {
if (adc_config[i] != HWSETTINGS_ADCROUTING_DISABLED) {
PIOS_ADC_PinSetup(i);
}
}
}
#endif // PIOS_INCLUDE_ADC
}
/**
* @}
* @}
*/