/**
******************************************************************************
*
* @file board_hw_defs.c.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2013.
* @brief Defines board hardware for the OpenPilot OPLink Mini board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(PIOS_INCLUDE_LED)
#include <pios_led_priv.h>
static const struct pios_gpio pios_leds[] = {
[PIOS_LED_USB] = {
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
.active_low = true
},
[PIOS_LED_LINK] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
.active_low = true
},
[PIOS_LED_RX] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
.active_low = true
},
[PIOS_LED_TX] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
.active_low = true
},
#ifdef PIOS_RFM22B_DEBUG_ON_TELEM
[PIOS_LED_D1] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
[PIOS_LED_D2] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
[PIOS_LED_D3] = {
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
[PIOS_LED_D4] = {
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
#endif /* ifdef PIOS_RFM22B_DEBUG_ON_TELEM */
};
static const struct pios_gpio_cfg pios_led_cfg = {
.gpios = pios_leds,
.num_gpios = NELEMENTS(pios_leds),
};
const struct pios_gpio_cfg *PIOS_BOARD_HW_DEFS_GetLedCfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_led_cfg;
}
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_FLASH)
#include "pios_flashfs_logfs_priv.h"
#include "pios_flash_internal_priv.h"
static const struct pios_flash_internal_cfg flash_internal_cfg = {};
static const struct flashfs_logfs_cfg flashfs_internal_cfg = {
.fs_magic = 0x99abcfef,
.total_fs_size = EE_BANK_SIZE, /* 2K bytes (2x1KB sectors) */
.arena_size = 0x00002000, /* 4 * slot size = 1K bytes = 1 sector */
.slot_size = 0x00000100, /* 256 bytes */
.start_offset = EE_BANK_BASE, /* start after the bootloader */
.sector_size = 0x00000400, /* 1K bytes */
.page_size = 0x00000400, /* 1K bytes */
};
#include "pios_flash.h"
#endif /* PIOS_INCLUDE_FLASH */
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* OP Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_port_irq_handler(void);
void DMA1_Channel5_IRQHandler() __attribute__((alias("PIOS_SPI_port_irq_handler")));
void DMA1_Channel4_IRQHandler() __attribute__((alias("PIOS_SPI_port_irq_handler")));
static const struct pios_spi_cfg pios_spi_rfm22b_cfg = {
.regs = SPI1,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 0,
.SPI_CPOL = SPI_CPOL_Low,
.SPI_CPHA = SPI_CPHA_1Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16, // slowest SCLK
},
.use_crc = FALSE,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC2 | DMA1_FLAG_TE2 | DMA1_FLAG_HT2 | DMA1_FLAG_GL2),
.init = {
.NVIC_IRQChannel = DMA1_Channel2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel2,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel3,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.slave_count = 1,
.ssel = {
{
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
}
},
.sclk = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.mosi = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
uint32_t pios_spi_rfm22b_id;
void PIOS_SPI_port_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_rfm22b_id);
}
#endif /* PIOS_INCLUDE_SPI */
#if defined(PIOS_INCLUDE_RFM22B)
#include <pios_rfm22b_priv.h>
static const struct pios_exti_cfg pios_exti_rfm22b_cfg __exti_config = {
.vector = PIOS_RFM22_EXT_Int,
.line = EXTI_Line2,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line2,
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Falling,
.EXTI_LineCmd = ENABLE,
},
},
};
#include <pios_rfm22b_priv.h>
struct pios_rfm22b_cfg pios_rfm22b_cfg = {
.spi_cfg = &pios_spi_rfm22b_cfg,
.exti_cfg = &pios_exti_rfm22b_cfg,
.RFXtalCap = 0x7f,
.slave_num = 0,
.gpio_direction = GPIO0_TX_GPIO1_RX,
};
// ! Compatibility layer for various hardware revisions
const struct pios_rfm22b_cfg *PIOS_BOARD_HW_DEFS_GetRfm22Cfg(__attribute__((unused)) uint32_t board_revision)
{
return &pios_rfm22b_cfg;
}
#endif /* PIOS_INCLUDE_RFM22B */
#if defined(PIOS_INCLUDE_ADC)
/*
* ADC system
*/
#include "pios_adc_priv.h"
extern void PIOS_ADC_handler(void);
void DMA1_Channel1_IRQHandler() __attribute__((alias("PIOS_ADC_handler")));
// Remap the ADC DMA handler to this one
static const struct pios_adc_cfg pios_adc_cfg = {
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
.init = {
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel1,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR,
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
}
},
.half_flag = DMA1_IT_HT1,
.full_flag = DMA1_IT_TC1,
};
struct pios_adc_dev pios_adc_devs[] = {
{
.cfg = &pios_adc_cfg,
.callback_function = NULL,
},
};
uint8_t pios_adc_num_devices = NELEMENTS(pios_adc_devs);
void PIOS_ADC_handler()
{
PIOS_ADC_DMA_Handler();
}
#endif /* PIOS_INCLUDE_ADC */
#if defined(PIOS_INCLUDE_TIM)
#include "pios_tim_priv.h"
static const TIM_TimeBaseInitTypeDef tim_1_2_3_4_time_base = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_1_cfg = {
.timer = TIM1,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_2_cfg = {
.timer = TIM2,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_3_cfg = {
.timer = TIM3,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_4_cfg = {
.timer = TIM4,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_channel pios_tim_all_port_pins[] = {
/* Main Tx */
{
.timer = TIM1,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
/* Main Rx */
{
.timer = TIM1,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
/* Flexi Tx */
{
.timer = TIM2,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap2_TIM2,
},
/* Flexi Rx */
{
.timer = TIM2,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap2_TIM2,
},
};
static const struct pios_tim_channel pios_tim_main_port_ppm = {
.timer = TIM1,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
};
static const struct pios_tim_channel pios_tim_flexi_port_ppm = {
.timer = TIM2,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap2_TIM2,
};
#endif /* PIOS_INCLUDE_TIM */
#if defined(PIOS_INCLUDE_SERVO) && defined(PIOS_INCLUDE_TIM)
/*
* Servo outputs
*/
#include <pios_servo_priv.h>
const struct pios_servo_cfg pios_servo_main_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_all_port_pins,
.num_channels = 2
};
const struct pios_servo_cfg pios_servo_flexi_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = &(pios_tim_all_port_pins[2]),
.num_channels = 2
};
const struct pios_servo_cfg pios_servo_main_flexi_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_all_port_pins,
.num_channels = 4
};
#endif /* PIOS_INCLUDE_SERVO && PIOS_INCLUDE_TIM */
/*
* PPM Inputs
*/
#if defined(PIOS_INCLUDE_PPM)
#include <pios_ppm_priv.h>
const struct pios_ppm_cfg pios_ppm_main_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.channels = &pios_tim_main_port_ppm,
.num_channels = 1,
};
const struct pios_ppm_cfg pios_ppm_flexi_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.channels = &pios_tim_flexi_port_ppm,
.num_channels = 1,
};
#endif /* PIOS_INCLUDE_PPM */
/*
* PPM Output
*/
#if defined(PIOS_INCLUDE_PPM_OUT)
#include <pios_ppm_out_priv.h>
const struct pios_ppm_out_cfg pios_main_ppm_out_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_Low,
.TIM_OCNPolarity = TIM_OCPolarity_Low,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channel = &(pios_tim_all_port_pins[0]),
};
const struct pios_ppm_out_cfg pios_flexi_ppm_out_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_Low,
.TIM_OCNPolarity = TIM_OCPolarity_Low,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channel = &(pios_tim_all_port_pins[2]),
};
#endif /* PIOS_INCLUDE_PPM_OUT */
#if defined(PIOS_INCLUDE_USART)
#include <pios_usart_priv.h>
/*
* SERIAL USART
*/
static const struct pios_usart_cfg pios_usart_serial_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
static const struct pios_usart_cfg pios_usart_telem_flexi_cfg = {
.regs = USART3,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#endif /* PIOS_INCLUDE_USART */
#if defined(PIOS_INCLUDE_COM)
#include <pios_com_priv.h>
#endif /* PIOS_INCLUDE_COM */
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler(void);
void RTC_IRQHandler() __attribute__((alias("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div128,
.prescaler = 100,
.irq = {
.init = {
.NVIC_IRQChannel = RTC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler(void)
{
PIOS_RTC_irq_handler();
}
#endif /* if defined(PIOS_INCLUDE_RTC) */
#if defined(PIOS_INCLUDE_RCVR)
#include "pios_rcvr_priv.h"
#endif /* PIOS_INCLUDE_RCVR */
#if defined(PIOS_INCLUDE_USB)
#include "pios_usb_priv.h"
static const struct pios_usb_cfg pios_usb_main_cfg = {
.irq = {
.init = {
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.vsense = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.vsense_active_low = false
};
#include "pios_usb_board_data_priv.h"
#include "pios_usb_desc_hid_cdc_priv.h"
#include "pios_usb_desc_hid_only_priv.h"
#endif /* PIOS_INCLUDE_USB */
#if defined(PIOS_INCLUDE_COM_MSG)
#include <pios_com_msg_priv.h>
#endif /* PIOS_INCLUDE_COM_MSG */
#if defined(PIOS_INCLUDE_USB_HID)
#include <pios_usb_hid_priv.h>
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
.data_if = 2,
.data_rx_ep = 1,
.data_tx_ep = 1,
};
#endif /* PIOS_INCLUDE_USB_HID */
#if defined(PIOS_INCLUDE_USB_CDC)
#include <pios_usb_cdc_priv.h>
const struct pios_usb_cdc_cfg pios_usb_cdc_cfg = {
.ctrl_if = 0,
.ctrl_tx_ep = 2,
.data_if = 1,
.data_rx_ep = 3,
.data_tx_ep = 3,
};
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_FLASH_EEPROM)
#include <pios_eeprom.h>
const struct pios_eeprom_cfg pios_eeprom_cfg = {
.base_address = PIOS_FLASH_EEPROM_ADDR,
.max_size = PIOS_FLASH_EEPROM_LEN,
};
#endif /* PIOS_INCLUDE_FLASH_EEPROM */
#if defined(PIOS_INCLUDE_RFM22B)
#include <pios_rfm22b_priv.h>
#endif /* PIOS_INCLUDE_RFM22B */