/** ****************************************************************************** * @addtogroup OpenPilotModules OpenPilot Modules * @{ * @addtogroup ActuatorModule Actuator Module * @brief Compute servo/motor settings based on @ref ActuatorDesired "desired actuator positions" and aircraft type. * This is where all the mixing of channels is computed. * @{ * * @file actuator.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010. * @brief Actuator module. Drives the actuators (servos, motors etc). * * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "openpilot.h" #include "accessorydesired.h" #include "actuator.h" #include "actuatorsettings.h" #include "systemsettings.h" #include "actuatordesired.h" #include "actuatorcommand.h" #include "flightstatus.h" #include "mixersettings.h" #include "mixerstatus.h" #include "cameradesired.h" #include "manualcontrolcommand.h" // Private constants #define MAX_QUEUE_SIZE 2 #if defined(PIOS_ACTUATOR_STACK_SIZE) #define STACK_SIZE_BYTES PIOS_ACTUATOR_STACK_SIZE #else #define STACK_SIZE_BYTES 1312 #endif #define TASK_PRIORITY (tskIDLE_PRIORITY+4) #define FAILSAFE_TIMEOUT_MS 100 #define MAX_MIX_ACTUATORS ACTUATORCOMMAND_CHANNEL_NUMELEM #define CAMERA_BOOT_DELAY_MS 7000 // Private types // Private variables static xQueueHandle queue; static xTaskHandle taskHandle; static float lastResult[MAX_MIX_ACTUATORS]={0,0,0,0,0,0,0,0}; static float filterAccumulator[MAX_MIX_ACTUATORS]={0,0,0,0,0,0,0,0}; // used to inform the actuator thread that actuator update rate is changed static volatile bool actuator_settings_updated; // used to inform the actuator thread that mixer settings are changed static volatile bool mixer_settings_updated; // Private functions static void actuatorTask(void* parameters); static int16_t scaleChannel(float value, int16_t max, int16_t min, int16_t neutral); static void setFailsafe(const ActuatorSettingsData * actuatorSettings, const MixerSettingsData * mixerSettings); static float MixerCurve(const float throttle, const float* curve, uint8_t elements); static bool set_channel(uint8_t mixer_channel, uint16_t value, const ActuatorSettingsData * actuatorSettings); static void actuator_update_rate_if_changed(const ActuatorSettingsData * actuatorSettings, bool force_update); static void MixerSettingsUpdatedCb(UAVObjEvent * ev); static void ActuatorSettingsUpdatedCb(UAVObjEvent * ev); float ProcessMixer(const int index, const float curve1, const float curve2, const MixerSettingsData* mixerSettings, ActuatorDesiredData* desired, const float period); //this structure is equivalent to the UAVObjects for one mixer. typedef struct { uint8_t type; int8_t matrix[5]; } __attribute__((packed)) Mixer_t; /** * @brief Module initialization * @return 0 */ int32_t ActuatorStart() { // Start main task xTaskCreate(actuatorTask, (signed char*)"Actuator", STACK_SIZE_BYTES/4, NULL, TASK_PRIORITY, &taskHandle); TaskMonitorAdd(TASKINFO_RUNNING_ACTUATOR, taskHandle); PIOS_WDG_RegisterFlag(PIOS_WDG_ACTUATOR); return 0; } /** * @brief Module initialization * @return 0 */ int32_t ActuatorInitialize() { // Register for notification of changes to ActuatorSettings ActuatorSettingsInitialize(); ActuatorSettingsConnectCallback(ActuatorSettingsUpdatedCb); // Register for notification of changes to MixerSettings MixerSettingsInitialize(); MixerSettingsConnectCallback(MixerSettingsUpdatedCb); // Listen for ActuatorDesired updates (Primary input to this module) ActuatorDesiredInitialize(); queue = xQueueCreate(MAX_QUEUE_SIZE, sizeof(UAVObjEvent)); ActuatorDesiredConnectQueue(queue); // Primary output of this module ActuatorCommandInitialize(); #ifdef DIAG_MIXERSTATUS // UAVO only used for inspecting the internal status of the mixer during debug MixerStatusInitialize(); #endif return 0; } MODULE_INITCALL(ActuatorInitialize, ActuatorStart) /** * @brief Main Actuator module task * * Universal matrix based mixer for VTOL, helis and fixed wing. * Converts desired roll,pitch,yaw and throttle to servo/ESC outputs. * * Because of how the Throttle ranges from 0 to 1, the motors should too! * * Note this code depends on the UAVObjects for the mixers being all being the same * and in sequence. If you change the object definition, make sure you check the code! * * @return -1 if error, 0 if success */ static void actuatorTask(__attribute__((unused)) void* parameters) { UAVObjEvent ev; portTickType lastSysTime; portTickType thisSysTime; float dTSeconds; uint32_t dTMilliseconds; ActuatorCommandData command; ActuatorDesiredData desired; MixerStatusData mixerStatus; FlightStatusData flightStatus; /* Read initial values of ActuatorSettings */ ActuatorSettingsData actuatorSettings; actuator_settings_updated = false; ActuatorSettingsGet(&actuatorSettings); /* Read initial values of MixerSettings */ MixerSettingsData mixerSettings; mixer_settings_updated = false; MixerSettingsGet(&mixerSettings); /* Force an initial configuration of the actuator update rates */ actuator_update_rate_if_changed(&actuatorSettings, true); // Go to the neutral (failsafe) values until an ActuatorDesired update is received setFailsafe(&actuatorSettings, &mixerSettings); // Main task loop lastSysTime = xTaskGetTickCount(); while (1) { PIOS_WDG_UpdateFlag(PIOS_WDG_ACTUATOR); // Wait until the ActuatorDesired object is updated uint8_t rc = xQueueReceive(queue, &ev, FAILSAFE_TIMEOUT_MS / portTICK_RATE_MS); /* Process settings updated events even in timeout case so we always act on the latest settings */ if (actuator_settings_updated) { actuator_settings_updated = false; ActuatorSettingsGet (&actuatorSettings); actuator_update_rate_if_changed (&actuatorSettings, false); } if (mixer_settings_updated) { mixer_settings_updated = false; MixerSettingsGet (&mixerSettings); } if (rc != pdTRUE) { /* Update of ActuatorDesired timed out. Go to failsafe */ setFailsafe(&actuatorSettings, &mixerSettings); continue; } // Check how long since last update thisSysTime = xTaskGetTickCount(); dTMilliseconds = (thisSysTime == lastSysTime)? 1: (thisSysTime - lastSysTime) * portTICK_RATE_MS; lastSysTime = thisSysTime; dTSeconds = dTMilliseconds * 0.001f; FlightStatusGet(&flightStatus); ActuatorDesiredGet(&desired); ActuatorCommandGet(&command); #ifdef DIAG_MIXERSTATUS MixerStatusGet(&mixerStatus); #endif int nMixers = 0; Mixer_t * mixers = (Mixer_t *)&mixerSettings.Mixer1Type; for(int ct=0; ct < MAX_MIX_ACTUATORS; ct++) { if(mixers[ct].type != MIXERSETTINGS_MIXER1TYPE_DISABLED) { nMixers ++; } } if((nMixers < 2) && !ActuatorCommandReadOnly()) //Nothing can fly with less than two mixers. { setFailsafe(&actuatorSettings, &mixerSettings); // So that channels like PWM buzzer keep working continue; } AlarmsClear(SYSTEMALARMS_ALARM_ACTUATOR); bool armed = flightStatus.Armed == FLIGHTSTATUS_ARMED_ARMED; bool positiveThrottle = desired.Throttle >= 0.00f; bool spinWhileArmed = actuatorSettings.MotorsSpinWhileArmed == ACTUATORSETTINGS_MOTORSSPINWHILEARMED_TRUE; float curve1 = MixerCurve(desired.Throttle,mixerSettings.ThrottleCurve1,MIXERSETTINGS_THROTTLECURVE1_NUMELEM); //The source for the secondary curve is selectable float curve2 = 0; AccessoryDesiredData accessory; switch(mixerSettings.Curve2Source) { case MIXERSETTINGS_CURVE2SOURCE_THROTTLE: curve2 = MixerCurve(desired.Throttle,mixerSettings.ThrottleCurve2,MIXERSETTINGS_THROTTLECURVE2_NUMELEM); break; case MIXERSETTINGS_CURVE2SOURCE_ROLL: curve2 = MixerCurve(desired.Roll,mixerSettings.ThrottleCurve2,MIXERSETTINGS_THROTTLECURVE2_NUMELEM); break; case MIXERSETTINGS_CURVE2SOURCE_PITCH: curve2 = MixerCurve(desired.Pitch,mixerSettings.ThrottleCurve2, MIXERSETTINGS_THROTTLECURVE2_NUMELEM); break; case MIXERSETTINGS_CURVE2SOURCE_YAW: curve2 = MixerCurve(desired.Yaw,mixerSettings.ThrottleCurve2,MIXERSETTINGS_THROTTLECURVE2_NUMELEM); break; case MIXERSETTINGS_CURVE2SOURCE_COLLECTIVE: ManualControlCommandCollectiveGet(&curve2); curve2 = MixerCurve(curve2,mixerSettings.ThrottleCurve2, MIXERSETTINGS_THROTTLECURVE2_NUMELEM); break; case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY0: case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY1: case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY2: case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY3: case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY4: case MIXERSETTINGS_CURVE2SOURCE_ACCESSORY5: if(AccessoryDesiredInstGet(mixerSettings.Curve2Source - MIXERSETTINGS_CURVE2SOURCE_ACCESSORY0,&accessory) == 0) curve2 = MixerCurve(accessory.AccessoryVal,mixerSettings.ThrottleCurve2,MIXERSETTINGS_THROTTLECURVE2_NUMELEM); else curve2 = 0; break; } float * status = (float *)&mixerStatus; //access status objects as an array of floats for(int ct=0; ct < MAX_MIX_ACTUATORS; ct++) { // During boot all camera actuators should be completely disabled (PWM pulse = 0). // command.Channel[i] is reused below as a channel PWM activity flag: // 0 - PWM disabled, >0 - PWM set to real mixer value using scaleChannel() later. // Setting it to 1 by default means "Rescale this channel and enable PWM on its output". command.Channel[ct] = 1; if(mixers[ct].type == MIXERSETTINGS_MIXER1TYPE_DISABLED) { // Set to minimum if disabled. This is not the same as saying PWM pulse = 0 us status[ct] = -1; continue; } if((mixers[ct].type == MIXERSETTINGS_MIXER1TYPE_MOTOR) || (mixers[ct].type == MIXERSETTINGS_MIXER1TYPE_SERVO)) status[ct] = ProcessMixer(ct, curve1, curve2, &mixerSettings, &desired, dTSeconds); else status[ct] = -1; // Motors have additional protection for when to be on if(mixers[ct].type == MIXERSETTINGS_MIXER1TYPE_MOTOR) { // If not armed or motors aren't meant to spin all the time if( !armed || (!spinWhileArmed && !positiveThrottle)) { filterAccumulator[ct] = 0; lastResult[ct] = 0; status[ct] = -1; //force min throttle } // If armed meant to keep spinning, else if ((spinWhileArmed && !positiveThrottle) || (status[ct] < 0) ) status[ct] = 0; } // If an accessory channel is selected for direct bypass mode // In this configuration the accessory channel is scaled and mapped // directly to output. Note: THERE IS NO SAFETY CHECK HERE FOR ARMING // these also will not be updated in failsafe mode. I'm not sure what // the correct behavior is since it seems domain specific. I don't love // this code if( (mixers[ct].type >= MIXERSETTINGS_MIXER1TYPE_ACCESSORY0) && (mixers[ct].type <= MIXERSETTINGS_MIXER1TYPE_ACCESSORY5)) { if(AccessoryDesiredInstGet(mixers[ct].type - MIXERSETTINGS_MIXER1TYPE_ACCESSORY0,&accessory) == 0) status[ct] = accessory.AccessoryVal; else status[ct] = -1; } if( (mixers[ct].type >= MIXERSETTINGS_MIXER1TYPE_CAMERAROLLORSERVO1) && (mixers[ct].type <= MIXERSETTINGS_MIXER1TYPE_CAMERAYAW)) { CameraDesiredData cameraDesired; if( CameraDesiredGet(&cameraDesired) == 0 ) { switch(mixers[ct].type) { case MIXERSETTINGS_MIXER1TYPE_CAMERAROLLORSERVO1: status[ct] = cameraDesired.RollOrServo1; break; case MIXERSETTINGS_MIXER1TYPE_CAMERAPITCHORSERVO2: status[ct] = cameraDesired.PitchOrServo2; break; case MIXERSETTINGS_MIXER1TYPE_CAMERAYAW: status[ct] = cameraDesired.Yaw; break; default: break; } } else status[ct] = -1; // Disable camera actuators for CAMERA_BOOT_DELAY_MS after boot if (thisSysTime < (CAMERA_BOOT_DELAY_MS / portTICK_RATE_MS)) command.Channel[ct] = 0; } } // Set real actuator output values scaling them from mixers. All channels // will be set except explicitly disabled (which will have PWM pulse = 0). for (int i = 0; i < MAX_MIX_ACTUATORS; i++) if (command.Channel[i]) command.Channel[i] = scaleChannel(status[i], actuatorSettings.ChannelMax[i], actuatorSettings.ChannelMin[i], actuatorSettings.ChannelNeutral[i]); // Store update time command.UpdateTime = dTMilliseconds; if (command.UpdateTime > command.MaxUpdateTime) command.MaxUpdateTime = command.UpdateTime; // Update output object ActuatorCommandSet(&command); // Update in case read only (eg. during servo configuration) ActuatorCommandGet(&command); #ifdef DIAG_MIXERSTATUS MixerStatusSet(&mixerStatus); #endif // Update servo outputs bool success = true; for (int n = 0; n < ACTUATORCOMMAND_CHANNEL_NUMELEM; ++n) { success &= set_channel(n, command.Channel[n], &actuatorSettings); } if(!success) { command.NumFailedUpdates++; ActuatorCommandSet(&command); AlarmsSet(SYSTEMALARMS_ALARM_ACTUATOR, SYSTEMALARMS_ALARM_CRITICAL); } } } /** *Process mixing for one actuator */ float ProcessMixer(const int index, const float curve1, const float curve2, const MixerSettingsData* mixerSettings, ActuatorDesiredData* desired, const float period) { static float lastFilteredResult[MAX_MIX_ACTUATORS]; const Mixer_t * mixers = (Mixer_t *)&mixerSettings->Mixer1Type; //pointer to array of mixers in UAVObjects const Mixer_t * mixer = &mixers[index]; float result = (((float)mixer->matrix[MIXERSETTINGS_MIXER1VECTOR_THROTTLECURVE1] / 128.0f) * curve1) + (((float)mixer->matrix[MIXERSETTINGS_MIXER1VECTOR_THROTTLECURVE2] / 128.0f) * curve2) + (((float)mixer->matrix[MIXERSETTINGS_MIXER1VECTOR_ROLL] / 128.0f) * desired->Roll) + (((float)mixer->matrix[MIXERSETTINGS_MIXER1VECTOR_PITCH] / 128.0f) * desired->Pitch) + (((float)mixer->matrix[MIXERSETTINGS_MIXER1VECTOR_YAW] / 128.0f) * desired->Yaw); if(mixer->type == MIXERSETTINGS_MIXER1TYPE_MOTOR) { if(result < 0.0f) //idle throttle { result = 0.0f; } //feed forward float accumulator = filterAccumulator[index]; accumulator += (result - lastResult[index]) * mixerSettings->FeedForward; lastResult[index] = result; result += accumulator; if(period > 0.0f) { if(accumulator > 0.0f) { float filter = mixerSettings->AccelTime / period; if(filter <1) { filter = 1; } accumulator -= accumulator / filter; }else { float filter = mixerSettings->DecelTime / period; if(filter <1) { filter = 1; } accumulator -= accumulator / filter; } } filterAccumulator[index] = accumulator; result += accumulator; //acceleration limit float dt = result - lastFilteredResult[index]; float maxDt = mixerSettings->MaxAccel * period; if(dt > maxDt) //we are accelerating too hard { result = lastFilteredResult[index] + maxDt; } lastFilteredResult[index] = result; } return(result); } /** *Interpolate a throttle curve. Throttle input should be in the range 0 to 1. *Output is in the range 0 to 1. */ static float MixerCurve(const float throttle, const float* curve, uint8_t elements) { float scale = throttle * (float) (elements - 1); int idx1 = scale; scale -= (float)idx1; //remainder if(curve[0] < -1) { return(throttle); } if (idx1 < 0) { idx1 = 0; //clamp to lowest entry in table scale = 0; } int idx2 = idx1 + 1; if(idx2 >= elements) { idx2 = elements -1; //clamp to highest entry in table if(idx1 >= elements) { idx1 = elements -1; } } return curve[idx1] * (1.0f - scale) + curve[idx2] * scale; } /** * Convert channel from -1/+1 to servo pulse duration in microseconds */ static int16_t scaleChannel(float value, int16_t max, int16_t min, int16_t neutral) { int16_t valueScaled; // Scale if ( value >= 0.0f) { valueScaled = (int16_t)(value*((float)(max-neutral))) + neutral; } else { valueScaled = (int16_t)(value*((float)(neutral-min))) + neutral; } if (max>min) { if( valueScaled > max ) valueScaled = max; if( valueScaled < min ) valueScaled = min; } else { if( valueScaled < max ) valueScaled = max; if( valueScaled > min ) valueScaled = min; } return valueScaled; } /** * Set actuator output to the neutral values (failsafe) */ static void setFailsafe(const ActuatorSettingsData * actuatorSettings, const MixerSettingsData * mixerSettings) { /* grab only the parts that we are going to use */ int16_t Channel[ACTUATORCOMMAND_CHANNEL_NUMELEM]; ActuatorCommandChannelGet(Channel); const Mixer_t * mixers = (Mixer_t *)&mixerSettings->Mixer1Type; //pointer to array of mixers in UAVObjects // Reset ActuatorCommand to safe values for (int n = 0; n < ACTUATORCOMMAND_CHANNEL_NUMELEM; ++n) { if(mixers[n].type == MIXERSETTINGS_MIXER1TYPE_MOTOR) { Channel[n] = actuatorSettings->ChannelMin[n]; } else if(mixers[n].type == MIXERSETTINGS_MIXER1TYPE_SERVO) { Channel[n] = actuatorSettings->ChannelNeutral[n]; } else { Channel[n] = 0; } } // Set alarm AlarmsSet(SYSTEMALARMS_ALARM_ACTUATOR, SYSTEMALARMS_ALARM_CRITICAL); // Update servo outputs for (int n = 0; n < ACTUATORCOMMAND_CHANNEL_NUMELEM; ++n) { set_channel(n, Channel[n], actuatorSettings); } // Update output object's parts that we changed ActuatorCommandChannelSet(Channel); } /** * determine buzzer or blink sequence **/ typedef enum {BUZZ_BUZZER=0,BUZZ_ARMING=1,BUZZ_INFO=2,BUZZ_MAX=3} buzzertype; static inline bool buzzerState(buzzertype type) { // This is for buzzers that take a PWM input static uint32_t tune[BUZZ_MAX]={0}; static uint32_t tunestate[BUZZ_MAX]={0}; uint32_t newTune = 0; if(type==BUZZ_BUZZER) { // Decide what tune to play if (AlarmsGet(SYSTEMALARMS_ALARM_BATTERY) > SYSTEMALARMS_ALARM_WARNING) { newTune = 0b11110110110000; // pause, short, short, short, long } else if (AlarmsGet(SYSTEMALARMS_ALARM_GPS) >= SYSTEMALARMS_ALARM_WARNING) { newTune = 0x80000000; // pause, short } else { newTune = 0; } } else { // BUZZ_ARMING || BUZZ_INFO uint8_t arming; FlightStatusArmedGet(&arming); //base idle tune newTune = 0x80000000; // 0b1000... // Merge the error pattern for InfoLed if(type==BUZZ_INFO) { if (AlarmsGet(SYSTEMALARMS_ALARM_BATTERY) > SYSTEMALARMS_ALARM_WARNING) { newTune |= 0b00000000001111111011111110000000; } else if(AlarmsGet(SYSTEMALARMS_ALARM_GPS) >= SYSTEMALARMS_ALARM_WARNING) { newTune |= 0b00000000000000110110110000000000; } } // fast double blink pattern if armed if (arming == FLIGHTSTATUS_ARMED_ARMED) newTune |= 0xA0000000; // 0b101000... } // Do we need to change tune? if (newTune != tune[type]) { tune[type] = newTune; // resynchronize all tunes on change, so they stay in sync for (int i=0;i lastSysTime) { dT = thisSysTime - lastSysTime; } else { lastSysTime = 0; // avoid the case where SysTimeMax-lastSysTime <80 } buzzOn = (tunestate[type]&1); if (dT > 80) { // Go to next bit in alarm_seq_state for (int i=0;i>=1; if (tunestate[i]==0) // All done, re-start the tune tunestate[i]=tune[i]; } lastSysTime = thisSysTime; } } return buzzOn; } #if defined(ARCH_POSIX) || defined(ARCH_WIN32) static bool set_channel(uint8_t mixer_channel, uint16_t value, const ActuatorSettingsData * actuatorSettings) { return true; } #else static bool set_channel(uint8_t mixer_channel, uint16_t value, const ActuatorSettingsData * actuatorSettings) { switch(actuatorSettings->ChannelType[mixer_channel]) { case ACTUATORSETTINGS_CHANNELTYPE_PWMALARMBUZZER: PIOS_Servo_Set(actuatorSettings->ChannelAddr[mixer_channel], buzzerState(BUZZ_BUZZER)?actuatorSettings->ChannelMax[mixer_channel]:actuatorSettings->ChannelMin[mixer_channel]); return true; case ACTUATORSETTINGS_CHANNELTYPE_ARMINGLED: PIOS_Servo_Set(actuatorSettings->ChannelAddr[mixer_channel], buzzerState(BUZZ_ARMING)?actuatorSettings->ChannelMax[mixer_channel]:actuatorSettings->ChannelMin[mixer_channel]); return true; case ACTUATORSETTINGS_CHANNELTYPE_INFOLED: PIOS_Servo_Set(actuatorSettings->ChannelAddr[mixer_channel], buzzerState(BUZZ_INFO)?actuatorSettings->ChannelMax[mixer_channel]:actuatorSettings->ChannelMin[mixer_channel]); return true; case ACTUATORSETTINGS_CHANNELTYPE_PWM: PIOS_Servo_Set(actuatorSettings->ChannelAddr[mixer_channel], value); return true; #if defined(PIOS_INCLUDE_I2C_ESC) case ACTUATORSETTINGS_CHANNELTYPE_MK: return PIOS_SetMKSpeed(actuatorSettings->ChannelAddr[mixer_channel],value); case ACTUATORSETTINGS_CHANNELTYPE_ASTEC4: return PIOS_SetAstec4Speed(actuatorSettings->ChannelAddr[mixer_channel],value); #endif default: return false; } return false; } #endif /** * @brief Update the servo update rate */ static void actuator_update_rate_if_changed(const ActuatorSettingsData * actuatorSettings, bool force_update) { static uint16_t prevChannelUpdateFreq[ACTUATORSETTINGS_CHANNELUPDATEFREQ_NUMELEM]; // check if the any rate setting is changed if (force_update || memcmp (prevChannelUpdateFreq, actuatorSettings->ChannelUpdateFreq, sizeof(prevChannelUpdateFreq)) != 0) { /* Something has changed, apply the settings to HW */ memcpy (prevChannelUpdateFreq, actuatorSettings->ChannelUpdateFreq, sizeof(prevChannelUpdateFreq)); PIOS_Servo_SetHz(actuatorSettings->ChannelUpdateFreq, ACTUATORSETTINGS_CHANNELUPDATEFREQ_NUMELEM); } } static void ActuatorSettingsUpdatedCb(__attribute__((unused)) UAVObjEvent *ev) { actuator_settings_updated = true; } static void MixerSettingsUpdatedCb(__attribute__((unused)) UAVObjEvent *ev) { mixer_settings_updated = true; } /** * @} * @} */