/**
 ******************************************************************************
 * @addtogroup OpenPilotSystem OpenPilot System
 * @{
 * @addtogroup OpenPilotCore OpenPilot Core
 * @{
 *
 * @file       pios_board.c
 * @author     The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
 * @brief      Defines board specific static initializers for hardware for the OpenPilot board.
 * @see        The GNU Public License (GPL) Version 3
 *
 *****************************************************************************/
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include "inc/openpilot.h"
#include <pios_board_info.h>
#include <oplinksettings.h>
#include <taskinfo.h>

/*
 * Pull in the board-specific static HW definitions.
 * Including .c files is a bit ugly but this allows all of
 * the HW definitions to be const and static to limit their
 * scope.
 *
 * NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
 */
#include "../board_hw_defs.c"

#define PIOS_COM_TELEM_USB_RX_BUF_LEN 256
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 256

#define PIOS_COM_TELEM_VCP_RX_BUF_LEN 256
#define PIOS_COM_TELEM_VCP_TX_BUF_LEN 256

#define PIOS_COM_RFM22B_RF_RX_BUF_LEN 256
#define PIOS_COM_RFM22B_RF_TX_BUF_LEN 256

#define PIOS_COM_TELEM_RX_BUF_LEN     256
#define PIOS_COM_TELEM_TX_BUF_LEN     256

uint32_t pios_com_telem_usb_id = 0;
uint32_t pios_com_telem_vcp_id = 0;
uint32_t pios_com_telem_uart_main_id = 0;
uint32_t pios_com_telem_uart_flexi_id = 0;
uint32_t pios_com_telemetry_id = 0;
#if defined(PIOS_INCLUDE_PPM)
uint32_t pios_ppm_rcvr_id   = 0;
#endif
#if defined(PIOS_INCLUDE_PPM_OUT)
uint32_t pios_ppm_out_id    = 0;
#endif
#if defined(PIOS_INCLUDE_RFM22B)
uint32_t pios_rfm22b_id     = 0;
uint32_t pios_com_rfm22b_id = 0;
uint32_t pios_com_radio_id  = 0;
#endif
uint8_t *pios_uart_rx_buffer;
uint8_t *pios_uart_tx_buffer;

uintptr_t pios_uavo_settings_fs_id;

/**
 * PIOS_Board_Init()
 * initializes all the core subsystems on this specific hardware
 * called from System/openpilot.c
 */
void PIOS_Board_Init(void)
{
    /* Delay system */
    PIOS_DELAY_Init();

#ifdef PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
    uintptr_t flash_id;
    PIOS_Flash_Internal_Init(&flash_id, &flash_internal_cfg);
    PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_internal_cfg, &pios_internal_flash_driver, flash_id);
#endif

    /* Initialize UAVObject libraries */
    EventDispatcherInitialize();
    UAVObjInitialize();

    /* Set up the SPI interface to the rfm22b */
    if (PIOS_SPI_Init(&pios_spi_rfm22b_id, &pios_spi_rfm22b_cfg)) {
        PIOS_DEBUG_Assert(0);
    }

#ifdef PIOS_INCLUDE_WDG
    /* Initialize watchdog as early as possible to catch faults during init */
    PIOS_WDG_Init();
#endif /* PIOS_INCLUDE_WDG */

#if defined(PIOS_INCLUDE_RTC)
    /* Initialize the real-time clock and its associated tick */
    PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif /* PIOS_INCLUDE_RTC */

    OPLinkSettingsInitialize();

#if defined(PIOS_INCLUDE_LED)
    PIOS_LED_Init(&pios_led_cfg);
#endif /* PIOS_INCLUDE_LED */

    OPLinkSettingsData oplinkSettings;

    /* IAP System Setup */
    PIOS_IAP_Init();
    // check for safe mode commands from gcs
    if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
        PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
        PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
        OPLinkSettingsGet(&oplinkSettings);
        OPLinkSettingsSetDefaults(&oplinkSettings, 0);
        OPLinkSettingsSet(&oplinkSettings);
        // PIOS_EEPROM_Save((uint8_t*)&oplinkSettings, sizeof(OPLinkSettingsData));
        for (uint32_t i = 0; i < 10; i++) {
            PIOS_DELAY_WaitmS(100);
            PIOS_LED_Toggle(PIOS_LED_HEARTBEAT);
        }
        PIOS_IAP_WriteBootCmd(0, 0);
        PIOS_IAP_WriteBootCmd(1, 0);
        PIOS_IAP_WriteBootCmd(2, 0);
    }
    OPLinkSettingsGet(&oplinkSettings);


    /* Initialize the task monitor */
    if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
        PIOS_Assert(0);
    }

    /* Initialize the delayed callback library */
    CallbackSchedulerInitialize();

#if defined(PIOS_INCLUDE_TIM)
    /* Set up pulse timers */
    PIOS_TIM_InitClock(&tim_1_cfg);
    PIOS_TIM_InitClock(&tim_2_cfg);
    PIOS_TIM_InitClock(&tim_3_cfg);
    PIOS_TIM_InitClock(&tim_4_cfg);
#endif /* PIOS_INCLUDE_TIM */

    /* Initialize board specific USB data */
    PIOS_USB_BOARD_DATA_Init();


#if defined(PIOS_INCLUDE_USB_CDC)
    /* Flags to determine if various USB interfaces are advertised */
    bool usb_cdc_present = false;

    if (PIOS_USB_DESC_HID_CDC_Init()) {
        PIOS_Assert(0);
    }
    usb_cdc_present = true;
#else
    if (PIOS_USB_DESC_HID_ONLY_Init()) {
        PIOS_Assert(0);
    }
#endif

    /*Initialize the USB device */
    uint32_t pios_usb_id;
    PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg);

    /* Configure the USB HID port */
    {
        uint32_t pios_usb_hid_id;
        if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
            PIOS_Assert(0);
        }
        uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
        uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
        PIOS_Assert(rx_buffer);
        PIOS_Assert(tx_buffer);
        if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
                          rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
                          tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
            PIOS_Assert(0);
        }
    }

    /* Configure the USB virtual com port (VCP) */
#if defined(PIOS_INCLUDE_USB_CDC)
    if (usb_cdc_present) {
        uint32_t pios_usb_cdc_id;
        if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
            PIOS_Assert(0);
        }
        uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_VCP_RX_BUF_LEN);
        uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_VCP_TX_BUF_LEN);
        PIOS_Assert(rx_buffer);
        PIOS_Assert(tx_buffer);
        if (PIOS_COM_Init(&pios_com_telem_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
                          rx_buffer, PIOS_COM_TELEM_VCP_RX_BUF_LEN,
                          tx_buffer, PIOS_COM_TELEM_VCP_TX_BUF_LEN)) {
            PIOS_Assert(0);
        }
    }
#endif


    /* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
    {
        const struct pios_board_info *bdinfo     = &pios_board_info_blob;
        const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
        if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, rfm22b_cfg->slave_num, rfm22b_cfg)) {
            PIOS_Assert(0);
        }

        uint8_t *rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
        uint8_t *tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
        PIOS_Assert(rx_buffer);
        PIOS_Assert(tx_buffer);
        if (PIOS_COM_Init(&pios_com_rfm22b_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
                          rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
                          tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
            PIOS_Assert(0);
        }

        /* Set the RFM22B bindings. */
        PIOS_RFM22B_SetBindings(pios_rfm22b_id, oplinkSettings.Bindings, oplinkSettings.RemoteMainPort,
                                oplinkSettings.RemoteFlexiPort, oplinkSettings.RemoteVCPPort, oplinkSettings.ComSpeed);
    }
#endif /* PIOS_INCLUDE_RFM22B */

    /* Allocate the uart buffers. */
    pios_uart_rx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_RX_BUF_LEN);
    pios_uart_tx_buffer = (uint8_t *)pvPortMalloc(PIOS_COM_TELEM_TX_BUF_LEN);

    /* Remap AFIO pin */
    GPIO_PinRemapConfig(GPIO_Remap_SWJ_NoJTRST, ENABLE);

#ifdef PIOS_INCLUDE_ADC
    PIOS_ADC_Init();
#endif
    PIOS_GPIO_Init();
}

void PIOS_InitUartMainPort()
{
#ifndef PIOS_RFM22B_DEBUG_ON_TELEM
    uint32_t pios_usart1_id;
    if (PIOS_USART_Init(&pios_usart1_id, &pios_usart_serial_cfg)) {
        PIOS_Assert(0);
    }
    PIOS_Assert(pios_uart_rx_buffer);
    PIOS_Assert(pios_uart_tx_buffer);
    if (PIOS_COM_Init(&pios_com_telem_uart_main_id, &pios_usart_com_driver, pios_usart1_id,
                      pios_uart_rx_buffer, PIOS_COM_TELEM_RX_BUF_LEN,
                      pios_uart_tx_buffer, PIOS_COM_TELEM_TX_BUF_LEN)) {
        PIOS_Assert(0);
    }
#endif
}

void PIOS_InitUartFlexiPort()
{
    uint32_t pios_usart3_id;

    if (PIOS_USART_Init(&pios_usart3_id, &pios_usart_telem_flexi_cfg)) {
        PIOS_Assert(0);
    }
    PIOS_Assert(pios_uart_rx_buffer);
    PIOS_Assert(pios_uart_tx_buffer);
    if (PIOS_COM_Init(&pios_com_telem_uart_flexi_id, &pios_usart_com_driver, pios_usart3_id,
                      pios_uart_rx_buffer, PIOS_COM_TELEM_RX_BUF_LEN,
                      pios_uart_tx_buffer, PIOS_COM_TELEM_TX_BUF_LEN)) {
        PIOS_Assert(0);
    }
}

void PIOS_InitPPMMainPort(bool input)
{
#if defined(PIOS_INCLUDE_PPM)
    /* PPM input is configured on the coordinator modem and output on the remote modem. */
    if (input) {
        uint32_t pios_ppm_id;
        PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_main_cfg);

        if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
            PIOS_Assert(0);
        }
    }
    // For some reason, PPM output on the main port doesn't work.
#endif /* PIOS_INCLUDE_PPM */
}

void PIOS_InitPPMFlexiPort(bool input)
{
#if defined(PIOS_INCLUDE_PPM)
    /* PPM input is configured on the coordinator modem and output on the remote modem. */
    if (input) {
        uint32_t pios_ppm_id;
        PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_flexi_cfg);

        if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
            PIOS_Assert(0);
        }
    }
#if defined(PIOS_INCLUDE_PPM_OUT)
    else {
        PIOS_PPM_Out_Init(&pios_ppm_out_id, &pios_ppm_out_cfg);
    }
#endif /* PIOS_INCLUDE_PPM_OUT */
#endif /* PIOS_INCLUDE_PPM */
}

/**
 * @}
 */