/* -*- Mode: c; c-basic-offset: 2; tab-width: 2; indent-tabs-mode: t -*- */ /** ****************************************************************************** * @addtogroup OpenPilotSystem OpenPilot System * @{ * @addtogroup OpenPilotCore OpenPilot Core * @{ * * @file pios_board.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010. * @brief Defines board specific static initializers for hardware for the OpenPilot board. * @see The GNU Public License (GPL) Version 3 * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #define PIOS_COM_SERIAL_RX_BUF_LEN 256 #define PIOS_COM_SERIAL_TX_BUF_LEN 256 #define PIOS_COM_FLEXI_RX_BUF_LEN 256 #define PIOS_COM_FLEXI_TX_BUF_LEN 256 #define PIOS_COM_TELEM_USB_RX_BUF_LEN 256 #define PIOS_COM_TELEM_USB_TX_BUF_LEN 256 #define PIOS_COM_VCP_USB_RX_BUF_LEN 256 #define PIOS_COM_VCP_USB_TX_BUF_LEN 256 #define PIOS_COM_RFM22B_RF_RX_BUF_LEN 256 #define PIOS_COM_RFM22B_RF_TX_BUF_LEN 256 uint32_t pios_com_telem_usb_id = 0; uint32_t pios_com_telemetry_id; uint32_t pios_com_flexi_id; uint32_t pios_com_vcp_id; uint32_t pios_com_uavtalk_com_id = 0; uint32_t pios_com_trans_com_id = 0; uint32_t pios_com_debug_id = 0; uint32_t pios_com_rfm22b_id = 0; uint32_t pios_rfm22b_id = 0; uint32_t pios_ppm_rcvr_id = 0; /** * PIOS_Board_Init() * initializes all the core subsystems on this specific hardware * called from System/openpilot.c */ void PIOS_Board_Init(void) { /* Delay system */ PIOS_DELAY_Init(); /* Set up the SPI interface to the serial flash */ if (PIOS_SPI_Init(&pios_spi_port_id, &pios_spi_port_cfg)) { PIOS_Assert(0); } /* Initialize UAVObject libraries */ EventDispatcherInitialize(); UAVObjInitialize(); #ifdef PIOS_INCLUDE_WDG /* Initialize watchdog as early as possible to catch faults during init */ PIOS_WDG_Init(); #endif /* PIOS_INCLUDE_WDG */ #if defined(PIOS_INCLUDE_RTC) /* Initialize the real-time clock and its associated tick */ PIOS_RTC_Init(&pios_rtc_main_cfg); #endif /* PIOS_INCLUDE_RTC */ PipXSettingsInitialize(); #if defined(PIOS_INCLUDE_LED) PIOS_LED_Init(&pios_led_cfg); #endif /* PIOS_INCLUDE_LED */ PipXSettingsData pipxSettings; #if defined(PIOS_INCLUDE_FLASH_EEPROM) PIOS_EEPROM_Init(&pios_eeprom_cfg); /* Read the settings from flash. */ /* NOTE: We probably need to save/restore the objID here incase the object changed but the size doesn't */ if (PIOS_EEPROM_Load((uint8_t*)&pipxSettings, sizeof(PipXSettingsData)) == 0) PipXSettingsSet(&pipxSettings); else PipXSettingsGet(&pipxSettings); #else PipXSettingsGet(&pipxSettings); #endif /* PIOS_INCLUDE_FLASH_EEPROM */ /* Initialize the task monitor library */ TaskMonitorInitialize(); #if defined(PIOS_INCLUDE_TIM) /* Set up pulse timers */ PIOS_TIM_InitClock(&tim_1_cfg); PIOS_TIM_InitClock(&tim_2_cfg); PIOS_TIM_InitClock(&tim_3_cfg); PIOS_TIM_InitClock(&tim_4_cfg); #endif /* PIOS_INCLUDE_TIM */ #if defined(PIOS_INCLUDE_PACKET_HANDLER) pios_packet_handler = PHInitialize(&pios_ph_cfg); #endif /* PIOS_INCLUDE_PACKET_HANDLER */ #if defined(PIOS_INCLUDE_USB) /* Initialize board specific USB data */ PIOS_USB_BOARD_DATA_Init(); /* Flags to determine if various USB interfaces are advertised */ bool usb_hid_present = false; bool usb_cdc_present = false; #if defined(PIOS_INCLUDE_USB_CDC) if (PIOS_USB_DESC_HID_CDC_Init()) { PIOS_Assert(0); } usb_hid_present = true; usb_cdc_present = true; #else if (PIOS_USB_DESC_HID_ONLY_Init()) { PIOS_Assert(0); } usb_hid_present = true; #endif uint32_t pios_usb_id; PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg); #if defined(PIOS_INCLUDE_USB_CDC) if (!usb_cdc_present) { /* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */ pipxSettings.VCPConfig = PIPXSETTINGS_VCPCONFIG_DISABLED; } switch (pipxSettings.VCPConfig) { case PIPXSETTINGS_VCPCONFIG_SERIAL: case PIPXSETTINGS_VCPCONFIG_DEBUG: { uint32_t pios_usb_cdc_id; if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_VCP_USB_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_VCP_USB_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id, rx_buffer, PIOS_COM_VCP_USB_RX_BUF_LEN, tx_buffer, PIOS_COM_VCP_USB_TX_BUF_LEN)) { PIOS_Assert(0); } switch (pipxSettings.TelemetryConfig) { case PIPXSETTINGS_VCPCONFIG_SERIAL: pios_com_trans_com_id = pios_com_vcp_id; break; case PIPXSETTINGS_VCPCONFIG_DEBUG: pios_com_debug_id = pios_com_vcp_id; break; } break; } case PIPXSETTINGS_VCPCONFIG_DISABLED: break; } #endif #if defined(PIOS_INCLUDE_USB_HID) /* Configure the usb HID port */ #if defined(PIOS_INCLUDE_COM) { uint32_t pios_usb_hid_id; if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id, rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN, tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) { PIOS_Assert(0); } } #endif /* PIOS_INCLUDE_COM */ #endif /* PIOS_INCLUDE_USB_HID */ #endif /* PIOS_INCLUDE_USB */ /* Configure USART1 (telemetry port) */ switch (pipxSettings.TelemetryConfig) { case PIPXSETTINGS_TELEMETRYCONFIG_SERIAL: case PIPXSETTINGS_TELEMETRYCONFIG_UAVTALK: case PIPXSETTINGS_TELEMETRYCONFIG_DEBUG: { uint32_t pios_usart1_id; if (PIOS_USART_Init(&pios_usart1_id, &pios_usart_serial_cfg)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_SERIAL_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_SERIAL_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_telemetry_id, &pios_usart_com_driver, pios_usart1_id, rx_buffer, PIOS_COM_SERIAL_RX_BUF_LEN, tx_buffer, PIOS_COM_SERIAL_TX_BUF_LEN)) { PIOS_Assert(0); } switch (pipxSettings.TelemetryConfig) { case PIPXSETTINGS_TELEMETRYCONFIG_SERIAL: pios_com_trans_com_id = pios_com_telemetry_id; break; case PIPXSETTINGS_TELEMETRYCONFIG_UAVTALK: pios_com_uavtalk_com_id = pios_com_telemetry_id; break; case PIPXSETTINGS_TELEMETRYCONFIG_DEBUG: pios_com_debug_id = pios_com_telemetry_id; break; } break; } case PIPXSETTINGS_TELEMETRYCONFIG_DISABLED: break; } /* Configure USART3 */ switch (pipxSettings.FlexiConfig) { case PIPXSETTINGS_FLEXICONFIG_SERIAL: case PIPXSETTINGS_FLEXICONFIG_UAVTALK: case PIPXSETTINGS_FLEXICONFIG_DEBUG: { uint32_t pios_usart3_id; if (PIOS_USART_Init(&pios_usart3_id, &pios_usart_telem_flexi_cfg)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_FLEXI_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_FLEXI_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_flexi_id, &pios_usart_com_driver, pios_usart3_id, rx_buffer, PIOS_COM_FLEXI_RX_BUF_LEN, tx_buffer, PIOS_COM_FLEXI_TX_BUF_LEN)) { PIOS_Assert(0); } switch (pipxSettings.FlexiConfig) { case PIPXSETTINGS_FLEXICONFIG_SERIAL: pios_com_trans_com_id = pios_com_flexi_id; break; case PIPXSETTINGS_FLEXICONFIG_UAVTALK: pios_com_uavtalk_com_id = pios_com_flexi_id; break; case PIPXSETTINGS_FLEXICONFIG_DEBUG: pios_com_debug_id = pios_com_flexi_id; break; } break; } case PIPXSETTINGS_FLEXICONFIG_PPM_IN: #if defined(PIOS_INCLUDE_PPM) { uint32_t pios_ppm_id; PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg); if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) { PIOS_Assert(0); } } #endif /* PIOS_INCLUDE_PPM */ break; case PIPXSETTINGS_FLEXICONFIG_PPM_OUT: case PIPXSETTINGS_FLEXICONFIG_RSSI: case PIPXSETTINGS_FLEXICONFIG_DISABLED: break; } #if defined(PIOS_INCLUDE_RFM22B) struct pios_rfm22b_cfg pios_rfm22b_cfg = { .frequencyHz = 434000000, .minFrequencyHz = 434000000 - 2000000, .maxFrequencyHz = 434000000 + 2000000, .RFXtalCap = 0x7f, .maxRFBandwidth = 128000, .maxTxPower = RFM22_tx_pwr_txpow_7, // +20dBm .. 100mW }; /* Retrieve hardware settings. */ pios_rfm22b_cfg.frequencyHz = pipxSettings.Frequency; pios_rfm22b_cfg.RFXtalCap = pipxSettings.FrequencyCalibration; switch (pipxSettings.RFSpeed) { case PIPXSETTINGS_RFSPEED_2400: pios_rfm22b_cfg.maxRFBandwidth = 2000; break; case PIPXSETTINGS_RFSPEED_4800: pios_rfm22b_cfg.maxRFBandwidth = 4000; break; case PIPXSETTINGS_RFSPEED_9600: pios_rfm22b_cfg.maxRFBandwidth = 9600; break; case PIPXSETTINGS_RFSPEED_19200: pios_rfm22b_cfg.maxRFBandwidth = 19200; break; case PIPXSETTINGS_RFSPEED_38400: pios_rfm22b_cfg.maxRFBandwidth = 32000; break; case PIPXSETTINGS_RFSPEED_57600: pios_rfm22b_cfg.maxRFBandwidth = 64000; break; case PIPXSETTINGS_RFSPEED_115200: pios_rfm22b_cfg.maxRFBandwidth = 128000; break; } switch (pipxSettings.RFSpeed) { case PIPXSETTINGS_MAXRFPOWER_125: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_0; break; case PIPXSETTINGS_MAXRFPOWER_16: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_1; break; case PIPXSETTINGS_MAXRFPOWER_316: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_2; break; case PIPXSETTINGS_MAXRFPOWER_63: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_3; break; case PIPXSETTINGS_MAXRFPOWER_126: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_4; break; case PIPXSETTINGS_MAXRFPOWER_25: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_5; break; case PIPXSETTINGS_MAXRFPOWER_50: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_6; break; case PIPXSETTINGS_MAXRFPOWER_100: pios_rfm22b_cfg.maxTxPower = RFM22_tx_pwr_txpow_7; break; } /* Initalize the RFM22B radio COM device. */ { if (PIOS_RFM22B_Init(&pios_rfm22b_id, &pios_rfm22b_cfg)) { PIOS_Assert(0); } uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN); uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN); PIOS_Assert(rx_buffer); PIOS_Assert(tx_buffer); if (PIOS_COM_Init(&pios_com_rfm22b_id, &pios_rfm22b_com_driver, pios_rfm22b_id, rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN, tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) { PIOS_Assert(0); } } #endif /* PIOS_INCLUDE_RFM22B */ /* Remap AFIO pin */ GPIO_PinRemapConfig( GPIO_Remap_SWJ_NoJTRST, ENABLE); #ifdef PIOS_INCLUDE_ADC PIOS_ADC_Init(); #endif PIOS_GPIO_Init(); } /** * @} */