/** ****************************************************************************** * * @file pios_spi.c * @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010. * Parts by Thorsten Klose (tk@midibox.org) (tk@midibox.org) * @brief Hardware Abstraction Layer for SPI ports of STM32 * @see The GNU Public License (GPL) Version 3 * @defgroup PIOS_SPI SPI Functions * @notes * J19 provides two RCLK (alias Chip Select) lines.
* It's a software emulated SPI, therefore the selected spi_prescaler has no * effect! Bytes are transfered so fast as possible. The usage of * PIOS_SPI_PIN_DRIVER_STRONG is strongly recommended ;)
* DMA transfers are not supported by the emulation, so that * PIOS_SPI_TransferBlock() will consume CPU time (but the callback handling does work). * * Note that additional chip select lines can be easily added by using * the remaining free GPIOs of the core module. Shared SPI ports should be * arbitrated with (FreeRTOS based) Mutexes to avoid collisions! * @{ * *****************************************************************************/ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #if !defined(PIOS_DONT_USE_SPI) /* Local variables */ static void (*spi_callback[2])(void); static uint8_t tx_dummy_byte; static uint8_t rx_dummy_byte; /** * Initialises SPI pins * \param[in] mode currently only mode 0 supported * \return < 0 if initialisation failed */ int32_t PIOS_SPI_Init(void) { DMA_InitTypeDef DMA_InitStructure; DMA_StructInit(&DMA_InitStructure); NVIC_InitTypeDef NVIC_InitStructure; /* SPI0 */ /* Disable callback function */ spi_callback[0] = NULL; /* Set RC pin(s) to 1 */ PIOS_SPI_RC_PinSet(0, 1); // spi, rc_pin, pin_value /* IO configuration */ PIOS_SPI_IO_Init(0, PIOS_SPI_PIN_DRIVER_WEAK_OD); /* Enable SPI peripheral clock (APB2 == high speed) */ RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE); /* Enable DMA1 clock */ RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); /* DMA Configuration for SPI Rx Event */ DMA_Cmd(PIOS_SPI0_DMA_RX_PTR, DISABLE); DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&PIOS_SPI0_PTR->DR; DMA_InitStructure.DMA_MemoryBaseAddr = 0; /* Will be configured later */ DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; DMA_InitStructure.DMA_BufferSize = 0; /* Will be configured later */ DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; DMA_InitStructure.DMA_Priority = DMA_Priority_Medium; DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; DMA_Init(PIOS_SPI0_DMA_RX_PTR, &DMA_InitStructure); /* DMA Configuration for SPI Tx Event */ /* (partly re-using previous DMA setup) */ DMA_Cmd(PIOS_SPI0_DMA_TX_PTR, DISABLE); DMA_InitStructure.DMA_MemoryBaseAddr = 0; /* Will be configured later */ DMA_InitStructure.DMA_BufferSize = 0; /* Will be configured later */ DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; DMA_Init(PIOS_SPI0_DMA_TX_PTR, &DMA_InitStructure); /* Initial SPI peripheral configuration */ PIOS_SPI_TransferModeInit(0, PIOS_SPI_MODE_CLK1_PHASE1, PIOS_SPI_PRESCALER_128); /* Enable SPI */ SPI_Cmd(PIOS_SPI0_PTR, ENABLE); /* Enable SPI interrupts to DMA */ SPI_I2S_DMACmd(PIOS_SPI0_PTR, SPI_I2S_DMAReq_Tx | SPI_I2S_DMAReq_Rx, ENABLE); /* Configure DMA interrupt */ NVIC_InitStructure.NVIC_IRQChannel = PIOS_SPI0_DMA_IRQ_CHANNEL; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_SPI_DMA_PRIORITY; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); /* SPI1 */ /* Disable callback function */ spi_callback[1] = NULL; /* Set RC pin(s) to 1 */ PIOS_SPI_RC_PinSet(1, 1); /* spi, pin_value */ /* IO configuration */ PIOS_SPI_IO_Init(1, PIOS_SPI_PIN_DRIVER_WEAK_OD); /* Enable SPI peripheral clock (APB1 == slow speed) */ RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); /* Enable DMA1 clock */ RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); /* DMA Configuration for SPI Rx Event */ DMA_Cmd(PIOS_SPI1_DMA_RX_PTR, DISABLE); DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&PIOS_SPI1_PTR->DR; DMA_InitStructure.DMA_MemoryBaseAddr = 0; // will be configured later DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; DMA_InitStructure.DMA_BufferSize = 0; // will be configured later DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; DMA_InitStructure.DMA_Priority = DMA_Priority_Medium; DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; DMA_Init(PIOS_SPI1_DMA_RX_PTR, &DMA_InitStructure); /* DMA Configuration for SPI Tx Event */ /* (partly re-using previous DMA setup) */ DMA_Cmd(PIOS_SPI1_DMA_TX_PTR, DISABLE); DMA_InitStructure.DMA_MemoryBaseAddr = 0; // will be configured later DMA_InitStructure.DMA_BufferSize = 0; // will be configured later DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; DMA_Init(PIOS_SPI1_DMA_TX_PTR, &DMA_InitStructure); /* Initial SPI peripheral configuration */ PIOS_SPI_TransferModeInit(1, PIOS_SPI_MODE_CLK1_PHASE1, PIOS_SPI_PRESCALER_128); /* Enable SPI */ SPI_Cmd(PIOS_SPI1_PTR, ENABLE); /* Enable SPI interrupts to DMA */ SPI_I2S_DMACmd(PIOS_SPI1_PTR, SPI_I2S_DMAReq_Tx | SPI_I2S_DMAReq_Rx, ENABLE); /* Configure DMA interrupt */ NVIC_InitStructure.NVIC_IRQChannel = PIOS_SPI1_DMA_IRQ_CHANNEL; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_SPI_DMA_PRIORITY; /* defined in PIOS_irq.h */ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); /* No error */ return 0; } /** * (Re-)initializes SPI IO Pins * By default, all output pins are configured with weak open drain drivers for 2 MHz * \param[in] spi SPI number (0, 1 or 2) * \param[in] spi_pin_driver configures the driver strength: * * \return 0 if no error * \return -1 if disabled SPI port selected * \return -2 if unsupported SPI port selected * \return -3 if unsupported pin driver mode */ int32_t PIOS_SPI_IO_Init(uint8_t spi, SPIPinDriverTypeDef spi_pin_driver) { /* Init GPIO structure */ GPIO_InitTypeDef GPIO_InitStructure; GPIO_StructInit(&GPIO_InitStructure); /* Select pin driver and output mode */ uint32_t af_mode; uint32_t gp_mode; switch(spi_pin_driver) { case PIOS_SPI_PIN_DRIVER_STRONG: GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; af_mode = GPIO_Mode_AF_PP; gp_mode = GPIO_Mode_Out_PP; break; case PIOS_SPI_PIN_DRIVER_STRONG_OD: GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; af_mode = GPIO_Mode_AF_OD; gp_mode = GPIO_Mode_Out_OD; break; case PIOS_SPI_PIN_DRIVER_WEAK: GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; af_mode = GPIO_Mode_AF_PP; gp_mode = GPIO_Mode_Out_PP; break; case PIOS_SPI_PIN_DRIVER_WEAK_OD: GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; af_mode = GPIO_Mode_AF_OD; gp_mode = GPIO_Mode_Out_OD; break; default: /* Unsupported pin driver mode */ return -3; } switch(spi) { case 0: /* SCLK and DOUT are outputs assigned to alternate functions */ GPIO_InitStructure.GPIO_Mode = af_mode; GPIO_InitStructure.GPIO_Pin = PIOS_SPI0_SCLK_PIN; GPIO_Init(PIOS_SPI0_SCLK_PORT, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = PIOS_SPI0_MOSI_PIN; GPIO_Init(PIOS_SPI0_MOSI_PORT, &GPIO_InitStructure); /* RCLK outputs assigned to GPIO */ GPIO_InitStructure.GPIO_Mode = gp_mode; GPIO_InitStructure.GPIO_Pin = PIOS_SPI0_RCLK1_PIN; GPIO_Init(PIOS_SPI0_RCLK1_PORT, &GPIO_InitStructure); /* DIN is input with pull-up */ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; GPIO_InitStructure.GPIO_Pin = PIOS_SPI0_MISO_PIN; GPIO_Init(PIOS_SPI0_MISO_PORT, &GPIO_InitStructure); break; case 1: /* SCLK and DOUT are outputs assigned to alternate functions */ GPIO_InitStructure.GPIO_Mode = af_mode; GPIO_InitStructure.GPIO_Pin = PIOS_SPI1_SCLK_PIN; GPIO_Init(PIOS_SPI1_SCLK_PORT, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = PIOS_SPI1_MOSI_PIN; GPIO_Init(PIOS_SPI1_MOSI_PORT, &GPIO_InitStructure); /* RCLK outputs assigned to GPIO */ GPIO_InitStructure.GPIO_Mode = gp_mode; GPIO_InitStructure.GPIO_Pin = PIOS_SPI1_RCLK1_PIN; GPIO_Init(PIOS_SPI1_RCLK1_PORT, &GPIO_InitStructure); /* DIN is input with pull-up */ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; GPIO_InitStructure.GPIO_Pin = PIOS_SPI1_MISO_PIN; GPIO_Init(PIOS_SPI1_MISO_PORT, &GPIO_InitStructure); break; default: /* Unsupported SPI port */ return -2; } /* No error */ return 0; } /** * (Re-)initialises SPI peripheral transfer mode * By default, all SPI peripherals are configured with * PIOS_SPI_MODE_CLK1_PHASE1 and PIOS_SPI_PRESCALER_128 * * \param[in] spi SPI number (0 or 1) * \param[in] spi_mode configures clock and capture phase: * * \param[in] spi_prescaler configures the SPI speed: * * \return 0 if no error * \return -1 if disabled SPI port selected * \return -2 if unsupported SPI port selected * \return -3 if invalid spi_prescaler selected * \return -4 if invalid spi_mode selected */ int32_t PIOS_SPI_TransferModeInit(uint8_t spi, SPIModeTypeDef spi_mode, SPIPrescalerTypeDef spi_prescaler) { /* SPI configuration */ SPI_InitTypeDef SPI_InitStructure; SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; SPI_InitStructure.SPI_Mode = SPI_Mode_Master; SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; SPI_InitStructure.SPI_CRCPolynomial = 7; switch(spi_mode) { case PIOS_SPI_MODE_CLK0_PHASE0: SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; break; case PIOS_SPI_MODE_CLK0_PHASE1: SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge; break; case PIOS_SPI_MODE_CLK1_PHASE0: SPI_InitStructure.SPI_CPOL = SPI_CPOL_High; SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; break; case PIOS_SPI_MODE_CLK1_PHASE1: SPI_InitStructure.SPI_CPOL = SPI_CPOL_High; SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge; break; default: /* Invalid SPI clock/phase mode */ return -4; } if(spi_prescaler >= 8) { /* Invalid prescaler selected */ return -3; } switch(spi) { case 0: { uint16_t prev_cr1 = PIOS_SPI0_PTR->CR1; /* SPI1 perpipheral is located in APB2 domain and clocked at full speed */ /* therefore we have to add +1 to the prescaler */ SPI_InitStructure.SPI_BaudRatePrescaler = ((uint16_t)spi_prescaler&7) << 3; SPI_Init(PIOS_SPI0_PTR, &SPI_InitStructure); if((prev_cr1 ^ PIOS_SPI0_PTR->CR1) & 3) { /* CPOL and CPHA located at bit #1 and #0 */ /* clock configuration has been changed - we should send a dummy byte */ /* before the application activates chip select. */ /* this solves a dependency between SDCard and ENC28J60 driver */ PIOS_SPI_TransferByte(spi, 0xff); } } break; case 1: { uint16_t prev_cr1 = PIOS_SPI0_PTR->CR1; /* SPI2 perpipheral is located in APB1 domain and clocked at half speed */ if(spi_prescaler == 0) { SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; } else { SPI_InitStructure.SPI_BaudRatePrescaler = (((uint16_t)spi_prescaler&7)-1) << 3; } SPI_Init(PIOS_SPI1_PTR, &SPI_InitStructure); if((prev_cr1 ^ PIOS_SPI0_PTR->CR1) & 3) { /* CPOL and CPHA located at bit #1 and #0 */ /* clock configuration has been changed - we should send a dummy byte */ /* before the application activates chip select. */ /* this solves a dependency between SDCard and ENC28J60 driver */ PIOS_SPI_TransferByte(spi, 0xff); } } break; default: /* Unsupported SPI port */ return -2; } /* No error */ return 0; } /** * Controls the RC (Register Clock alias Chip Select) pin of a SPI port * \param[in] spi SPI number (0 or 1) * \param[in] pin_value 0 or 1 * \return 0 if no error * \return -1 if disabled SPI port selected * \return -2 if unsupported SPI port selected */ int32_t PIOS_SPI_RC_PinSet(uint8_t spi, uint8_t pin_value) { switch(spi) { case 0: if(pin_value) { PIOS_SPI0_RCLK1_PORT->BSRR = PIOS_SPI0_RCLK1_PIN; } else { PIOS_SPI0_RCLK1_PORT->BRR = PIOS_SPI0_RCLK1_PIN; } break; case 1: if(pin_value) { PIOS_SPI1_RCLK1_PORT->BSRR = PIOS_SPI1_RCLK1_PIN; } else { PIOS_SPI1_RCLK1_PORT->BRR = PIOS_SPI1_RCLK1_PIN; } break; default: /* Unsupported SPI port */ return -2; } /* No error */ return 0; } /** * Transfers a byte to SPI output and reads back the return value from SPI input * \param[in] spi SPI number (0 or 1) * \param[in] b the byte which should be transfered * \return >= 0: the read byte * \return -1 if disabled SPI port selected * \return -2 if unsupported SPI port selected * \return -3 if unsupported SPI mode configured via PIOS_SPI_TransferModeInit() */ int32_t PIOS_SPI_TransferByte(uint8_t spi, uint8_t b) { SPI_TypeDef *spi_ptr; switch(spi) { case 0: spi_ptr = PIOS_SPI0_PTR; break; case 1: spi_ptr = PIOS_SPI1_PTR; break; default: /* Unsupported SPI port */ return -2; } /* Send byte */ spi_ptr->DR = b; if(spi_ptr->SR); /* Dummy read due to undocumented pipelining issue :-/ */ /* TK: without this read (which can be done to any bus location) we could sporadically */ /* get the status byte at the moment where DR is written. Accordingly, the busy bit */ /* will be 0. */ /* you won't see this dummy read in STM drivers, as they never have a DR write */ /* followed by SR read, or as they are using SPI1/SPI2 pointers, which results into */ /* some additional CPU instructions between strh/ldrh accesses. */ /* We use a bus access instead of NOPs to avoid any risk for back-to-back transactions */ /* over AHB (if SPI1/SPI2 pointers are used, there is still a risk for such a scenario, */ /* e.g. if DMA loads the bus!) */ /* Wait until SPI transfer finished */ while(spi_ptr->SR & SPI_I2S_FLAG_BSY); /* Return received byte */ return spi_ptr->DR; } /** * Transfers a block of bytes via DMA. * \param[in] spi SPI number (0 or 1) * \param[in] send_buffer pointer to buffer which should be sent.
* If NULL, 0xff (all-one) will be sent. * \param[in] receive_buffer pointer to buffer which should get the received values.
* If NULL, received bytes will be discarded. * \param[in] len number of bytes which should be transfered * \param[in] callback pointer to callback function which will be executed * from DMA channel interrupt once the transfer is finished. * If NULL, no callback function will be used, and PIOS_SPI_TransferBlock() will * block until the transfer is finished. * \return >= 0 if no error during transfer * \return -1 if disabled SPI port selected * \return -2 if unsupported SPI port selected * \return -3 if function has been called during an ongoing DMA transfer */ int32_t PIOS_SPI_TransferBlock(uint8_t spi, uint8_t *send_buffer, uint8_t *receive_buffer, uint16_t len, void *callback) { DMA_Channel_TypeDef *dma_tx_ptr, *dma_rx_ptr; switch(spi) { case 0: dma_tx_ptr = PIOS_SPI0_DMA_TX_PTR; dma_rx_ptr = PIOS_SPI0_DMA_RX_PTR; break; case 1: dma_tx_ptr = PIOS_SPI1_DMA_TX_PTR; dma_rx_ptr = PIOS_SPI1_DMA_RX_PTR; break; default: /* Unsupported SPI port */ return -2; } /* Exit if ongoing transfer */ if(dma_rx_ptr->CNDTR) { return -3; } /* Set callback function */ spi_callback[spi] = callback; /* Configure Rx channel */ DMA_Cmd(dma_rx_ptr, DISABLE); if(receive_buffer != NULL) { /* Enable memory addr. increment - bytes written into receive buffer */ dma_rx_ptr->CMAR = (uint32_t)receive_buffer; dma_rx_ptr->CCR |= DMA_MemoryInc_Enable; } else { /* Disable memory addr. increment - bytes written into dummy buffer */ rx_dummy_byte = 0xff; dma_rx_ptr->CMAR = (uint32_t)&rx_dummy_byte; dma_rx_ptr->CCR &= ~DMA_MemoryInc_Enable; } dma_rx_ptr->CNDTR = len; DMA_Cmd(dma_rx_ptr, ENABLE); /* Configure Tx channel */ DMA_Cmd(dma_tx_ptr, DISABLE); if(send_buffer != NULL) { /* Enable memory addr. increment - bytes read from send buffer */ dma_tx_ptr->CMAR = (uint32_t)send_buffer; dma_tx_ptr->CCR |= DMA_MemoryInc_Enable; } else { /* Disable memory addr. increment - bytes read from dummy buffer */ tx_dummy_byte = 0xff; dma_tx_ptr->CMAR = (uint32_t)&tx_dummy_byte; dma_tx_ptr->CCR &= ~DMA_MemoryInc_Enable; } dma_tx_ptr->CNDTR = len; /* Enable DMA interrupt if callback function active */ DMA_ITConfig(dma_rx_ptr, DMA_IT_TC, (callback != NULL) ? ENABLE : DISABLE); /* Start DMA transfer */ DMA_Cmd(dma_tx_ptr, ENABLE); /* Wait until all bytes have been transmitted/received */ while(dma_rx_ptr->CNDTR); /* No error */ return 0; } /** * Called when callback function has been defined and SPI transfer has finished */ PIOS_SPI0_DMA_IRQHANDLER_FUNC { DMA_ClearFlag(PIOS_SPI0_DMA_RX_IRQ_FLAGS); if(spi_callback[0] != NULL) { spi_callback[0](); } } PIOS_SPI1_DMA_IRQHANDLER_FUNC { DMA_ClearFlag(PIOS_SPI1_DMA_RX_IRQ_FLAGS); if(spi_callback[1] != NULL) { spi_callback[1](); } } #endif