1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
LibrePilot/flight/PiOS/Boards/STM32103CB_AHRS.h
peabody124 c2bdf624e8 OP-269 PIOS/ADC: Previous ADC driver update changed the PCLK2 divider for all
projects which messed up a timer on OP and serial on PipX.  Now this is only
changed for AHRS.  Ideally wouldn't even change for that but then ADC runs too
fast and we get a lot more CRC errors for dealing with all that data.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2459 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-16 23:00:48 +00:00

269 lines
10 KiB
C
Raw Blame History

/**
******************************************************************************
*
* @file pios_board.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef STM32103CB_AHRS_H_
#define STM32103CB_AHRS_H_
//------------------------
// Timers and Channels Used
//------------------------
/*
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
------+-----------+-----------+-----------+----------
TIM1 | | | |
TIM2 | --------------- PIOS_DELAY -----------------
TIM3 | | | |
TIM4 | | | |
TIM5 | | | |
TIM6 | | | |
TIM7 | | | |
TIM8 | | | |
------+-----------+-----------+-----------+----------
*/
//------------------------
// DMA Channels Used
//------------------------
/* Channel 1 - */
/* Channel 2 - */
/* Channel 3 - */
/* Channel 4 - */
/* Channel 5 - */
/* Channel 6 - */
/* Channel 7 - */
/* Channel 8 - */
/* Channel 9 - */
/* Channel 10 - */
/* Channel 11 - */
/* Channel 12 - */
//------------------------
// BOOTLOADER_SETTINGS
//------------------------
//#define FUNC_ID 2
//#define HW_VERSION 69
#define BOOTLOADER_VERSION 0
#define BOARD_TYPE 0x02
#define BOARD_REVISION 0x01
//#define HW_VERSION (BOARD_TYPE << 8) | BOARD_REVISION
#define MEM_SIZE 0x20000 //128K
#define SIZE_OF_DESCRIPTION 100
#define START_OF_USER_CODE (uint32_t)0x08002000
#define SIZE_OF_CODE (uint32_t)(MEM_SIZE-(START_OF_USER_CODE-0x08000000)-SIZE_OF_DESCRIPTION)
#ifdef STM32F10X_HD
#define HW_TYPE 0 //0=high_density 1=medium_density;
#elif STM32F10X_MD
#define HW_TYPE 1 //0=high_density 1=medium_density;
#endif
#define BOARD_READABLE TRUE
#define BOARD_WRITABLA TRUE
#define MAX_DEL_RETRYS 3
//------------------------
// PIOS_LED
//------------------------
#define PIOS_LED_LED1_GPIO_PORT GPIOA
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_3
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOA
#define PIOS_LED_NUM 1
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT }
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN }
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK }
//-------------------------
// Delay Timer
//-------------------------
#define PIOS_DELAY_TIMER TIM2
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
//-------------------------
// System Settings
//-------------------------
#define PIOS_MASTER_CLOCK 72000000
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
#if defined(USE_BOOTLOADER)
#define PIOS_NVIC_VECTTAB_FLASH (START_OF_USER_CODE)
#else
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08000000)
#endif
//-------------------------
// Interrupt Priorities
//-------------------------
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
//------------------------
// PIOS_I2C
// See also pios_board.c
//------------------------
#define PIOS_I2C_MAIN_ADAPTER 0
//-------------------------
// SPI
//
// See also pios_board.c
//-------------------------
#define PIOS_SPI_OP 0
//-------------------------
// PIOS_USART
//-------------------------
#define PIOS_USART_RX_BUFFER_SIZE 256
#define PIOS_USART_TX_BUFFER_SIZE 256
#define PIOS_USART_BAUDRATE 230400
#define PIOS_COM_AUX 0
#define PIOS_COM_DEBUG PIOS_COM_AUX
//-------------------------
// ADC
// PIOS_ADC_PinGet(0) = Accel Z
// PIOS_ADC_PinGet(2) = Accel Y
// PIOS_ADC_PinGet(4) = Accel X
// PIOS_ADC_PinGet(1) = Gyro X
// PIOS_ADC_PinGet(3) = Gyro Y
// PIOS_ADC_PinGet(5) = Gyro Z
// PIOS_ADC_PinGet(6) = XY Temp
// PIOS_ADC_PinGet(7) = Z Temp
//-------------------------
//#define PIOS_ADC_OVERSAMPLING_RATE 1
#define PIOS_ADC_USE_TEMP_SENSOR 0
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
#define PIOS_ADC_PIN1_GPIO_PORT GPIOA // PA2 (Accel X)
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_2 // ADC12_IN2
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_2
#define PIOS_ADC_PIN1_ADC ADC1
#define PIOS_ADC_PIN1_ADC_NUMBER 1
#define PIOS_ADC_PIN2_GPIO_PORT GPIOA // PA1 (Accel Y)
#define PIOS_ADC_PIN2_GPIO_PIN GPIO_Pin_1 // ADC123_IN1
#define PIOS_ADC_PIN2_GPIO_CHANNEL ADC_Channel_1
#define PIOS_ADC_PIN2_ADC ADC1
#define PIOS_ADC_PIN2_ADC_NUMBER 2
#define PIOS_ADC_PIN3_GPIO_PORT GPIOA // PA0 (Accel Z)
#define PIOS_ADC_PIN3_GPIO_PIN GPIO_Pin_0 // ADC12_IN0
#define PIOS_ADC_PIN3_GPIO_CHANNEL ADC_Channel_0
#define PIOS_ADC_PIN3_ADC ADC1
#define PIOS_ADC_PIN3_ADC_NUMBER 3
#define PIOS_ADC_PIN4_GPIO_PORT GPIOA // PA6 (Temp_XY)
#define PIOS_ADC_PIN4_GPIO_PIN GPIO_Pin_6 // ADC12_IN6
#define PIOS_ADC_PIN4_GPIO_CHANNEL ADC_Channel_6
#define PIOS_ADC_PIN4_ADC ADC1
#define PIOS_ADC_PIN4_ADC_NUMBER 4
#define PIOS_ADC_PIN5_GPIO_PORT GPIOA // PA4 (Gyro X)
#define PIOS_ADC_PIN5_GPIO_PIN GPIO_Pin_4 // ADC12_IN4
#define PIOS_ADC_PIN5_GPIO_CHANNEL ADC_Channel_4
#define PIOS_ADC_PIN5_ADC ADC2
#define PIOS_ADC_PIN5_ADC_NUMBER 1
#define PIOS_ADC_PIN6_GPIO_PORT GPIOA // PA5 (Gyro Y)
#define PIOS_ADC_PIN6_GPIO_PIN GPIO_Pin_5 // ADC12_IN5
#define PIOS_ADC_PIN6_GPIO_CHANNEL ADC_Channel_5
#define PIOS_ADC_PIN6_ADC ADC2
#define PIOS_ADC_PIN6_ADC_NUMBER 2
#define PIOS_ADC_PIN7_GPIO_PORT GPIOA // PA7 (Gyro Z)
#define PIOS_ADC_PIN7_GPIO_PIN GPIO_Pin_7 // ADC12_IN7
#define PIOS_ADC_PIN7_GPIO_CHANNEL ADC_Channel_7
#define PIOS_ADC_PIN7_ADC ADC2
#define PIOS_ADC_PIN7_ADC_NUMBER 3
#define PIOS_ADC_PIN8_GPIO_PORT GPIOB // PB1 (Z Temp)
#define PIOS_ADC_PIN8_GPIO_PIN GPIO_Pin_1 // ADC12_IN9
#define PIOS_ADC_PIN8_GPIO_CHANNEL ADC_Channel_9
#define PIOS_ADC_PIN8_ADC ADC2
#define PIOS_ADC_PIN8_ADC_NUMBER 4
#define PIOS_ADC_NUM_PINS 8
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT, PIOS_ADC_PIN2_GPIO_PORT, PIOS_ADC_PIN3_GPIO_PORT, PIOS_ADC_PIN4_GPIO_PORT, PIOS_ADC_PIN5_GPIO_PORT, PIOS_ADC_PIN6_GPIO_PORT, PIOS_ADC_PIN7_GPIO_PORT, PIOS_ADC_PIN8_GPIO_PORT }
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN, PIOS_ADC_PIN2_GPIO_PIN, PIOS_ADC_PIN3_GPIO_PIN, PIOS_ADC_PIN4_GPIO_PIN, PIOS_ADC_PIN5_GPIO_PIN, PIOS_ADC_PIN6_GPIO_PIN, PIOS_ADC_PIN7_GPIO_PIN, PIOS_ADC_PIN8_GPIO_PIN }
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL, PIOS_ADC_PIN2_GPIO_CHANNEL, PIOS_ADC_PIN3_GPIO_CHANNEL, PIOS_ADC_PIN4_GPIO_CHANNEL, PIOS_ADC_PIN5_GPIO_CHANNEL, PIOS_ADC_PIN6_GPIO_CHANNEL, PIOS_ADC_PIN7_GPIO_CHANNEL, PIOS_ADC_PIN8_GPIO_CHANNEL }
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC, PIOS_ADC_PIN2_ADC, PIOS_ADC_PIN3_ADC, PIOS_ADC_PIN4_ADC, PIOS_ADC_PIN5_ADC, PIOS_ADC_PIN6_ADC, PIOS_ADC_PIN7_ADC, PIOS_ADC_PIN8_ADC }
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER, PIOS_ADC_PIN2_ADC_NUMBER, PIOS_ADC_PIN3_ADC_NUMBER, PIOS_ADC_PIN4_ADC_NUMBER, PIOS_ADC_PIN5_ADC_NUMBER, PIOS_ADC_PIN6_ADC_NUMBER, PIOS_ADC_PIN7_ADC_NUMBER, PIOS_ADC_PIN8_ADC_NUMBER }
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
#define PIOS_ADC_NUM_ADC_CHANNELS 2
#define PIOS_ADC_USE_ADC2 1
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div2
#define PIOS_ADC_PCLK2 RCC_HCLK_Div16
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE); RCC_PCLK2Config(PIOS_ADC_PCLK2);
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
/* Sample time: */
/* With an ADCCLK = 14 MHz and a sampling time of 239.5 cycles: */
/* Tconv = 239.5 + 12.5 = 252 cycles = 18<31>s */
/* (1 / (ADCCLK / CYCLES)) = Sample Time (<28>S) */
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_LOW
// Currently analog acquistion hard coded at 480 Hz
// PCKL2 = HCLK / 16
// ADCCLK = PCLK2 / 2
#define PIOS_ADC_RATE (72.0e6 / 16 / 2 / 252 / (PIOS_ADC_NUM_PINS / 2))
#define EKF_RATE (PIOS_ADC_RATE / adc_oversampling / 2)
#define PIOS_ADC_MAX_OVERSAMPLING 50
//-------------------------
// GPIO
//-------------------------
#define PIOS_GPIO_1_PORT GPIOB
#define PIOS_GPIO_1_PIN GPIO_Pin_9
#define PIOS_GPIO_1_GPIO_CLK RCC_APB2Periph_GPIOB
#define PIOS_GPIO_PORTS { PIOS_GPIO_1_PORT }
#define PIOS_GPIO_PINS { PIOS_GPIO_1_PIN }
#define PIOS_GPIO_CLKS { PIOS_GPIO_1_GPIO_CLK }
#define PIOS_GPIO_NUM 1
#define SET_ACCEL_2G PIOS_GPIO_On(0);
#define SET_ACCEL_6G PIOS_GPIO_Off(0)
//------------------------
// PIOS_HMC5843
//------------------------
#define PIOS_HMC5843_DRDY_GPIO_PORT GPIOB
#define PIOS_HMC5843_DRDY_GPIO_PIN GPIO_Pin_8
#define PIOS_HMC5843_DRDY_PORT_SOURCE GPIO_PortSourceGPIOB
#define PIOS_HMC5843_DRDY_PIN_SOURCE GPIO_PinSource8
#define PIOS_HMC5843_DRDY_CLK RCC_APB2Periph_GPIOB
#define PIOS_HMC5843_DRDY_EXTI_LINE EXTI_Line8
#define PIOS_HMC5843_DRDY_IRQn EXTI9_5_IRQn
#define PIOS_HMC5843_DRDY_PRIO PIOS_IRQ_PRIO_HIGH
#endif /* STM32103CB_AHRS_H_ */