1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
LibrePilot/flight/Bootloaders/OpenPilot/Makefile
Stacey Sheldon 7e99419c8a build: Add support for %.bin.o generation
The .bin.o rule places the contents of a raw .bin file
into an .o file wrapped within fixed symbols for start
and end.  This can be used to embed a binary file inside
of an executable.

The symbols for the embedded binary blob are:
 _binary_start
 _binary_end
 _binary_size

NOTE: The way the .bin.o rule is currently written, you
can only embed one binary blob in an executable since the
symbol names will collide if you add multiple blobs.  This
limitation is easily removed later if necessary.
2011-05-07 18:05:50 -04:00

503 lines
15 KiB
Makefile

#####
# Project: OpenPilot
#
#
# Makefile for OpenPilot project build PiOS and the AP.
#
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
#
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#####
WHEREAMI := $(dir $(lastword $(MAKEFILE_LIST)))
TOP := $(realpath $(WHEREAMI)/../../../)
include $(TOP)/make/firmware-defs.mk
# Set developer code and compile options
# Set to YES to compile for debugging
DEBUG ?= NO
# Set to YES to use the Servo output pins for debugging via scope or logic analyser
ENABLE_DEBUG_PINS ?= NO
# Set to Yes to enable the AUX UART which is mapped on the S1 (Tx) and S2 (Rx) servo outputs
ENABLE_AUX_UART ?= NO
#
override USE_BOOTLOADER = NO
# Set to YES when using Code Sourcery toolchain
CODE_SOURCERY ?= NO
# Remove command is different for Code Sourcery on Windows
ifeq ($(CODE_SOURCERY), YES)
REMOVE_CMD = cs-rm
else
REMOVE_CMD = rm
endif
FLASH_TOOL = OPENOCD
# MCU name, submodel and board
# - MCU used for compiler-option (-mcpu)
# - MODEL used for linker-script name (-T) and passed as define
# - BOARD just passed as define (optional)
MCU = cortex-m3
CHIP = STM32F103RET
BOARD = STM3210E_OP
MODEL = HD
ifeq ($(USE_BOOTLOADER), YES)
BOOT_MODEL = $(MODEL)_BL
else
BOOT_MODEL = $(MODEL)_NB
endif
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
OUTDIR = $(TOP)/build/bl_openpilot
# Target file name (without extension).
TARGET = OpenPilot_BL
# Paths
OPSYSTEM = .
OPSYSTEMINC = $(OPSYSTEM)/inc
OPUAVTALK = ./UAVTalk
OPUAVTALKINC = $(OPUAVTALK)/inc
OPUAVOBJ = ./UAVObjects
OPUAVOBJINC = $(OPUAVOBJ)/inc
OPTESTS = ./Tests
OPMODULEDIR = ./Modules
FLIGHTLIB = ../../Libraries
FLIGHTLIBINC = ../../Libraries/inc
PIOS = ../../PiOS
PIOSINC = $(PIOS)/inc
PIOSSTM32F10X = $(PIOS)/STM32F10x
PIOSCOMMON = $(PIOS)/Common
PIOSBOARDS = $(PIOS)/Boards
APPLIBDIR = $(PIOSSTM32F10X)/Libraries
STMLIBDIR = $(APPLIBDIR)
STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver
STMUSBDIR = $(STMLIBDIR)/STM32_USB-FS-Device_Driver
STMSPDSRCDIR = $(STMSPDDIR)/src
STMSPDINCDIR = $(STMSPDDIR)/inc
STMUSBSRCDIR = $(STMUSBDIR)/src
STMUSBINCDIR = $(STMUSBDIR)/inc
CMSISDIR = $(STMLIBDIR)/CMSIS/Core/CM3
DOSFSDIR = $(APPLIBDIR)/dosfs
MSDDIR = $(APPLIBDIR)/msd
RTOSDIR = $(APPLIBDIR)/FreeRTOS
RTOSSRCDIR = $(RTOSDIR)/Source
RTOSINCDIR = $(RTOSSRCDIR)/include
DOXYGENDIR = ../Doc/Doxygen
# List C source files here. (C dependencies are automatically generated.)
# use file-extension c for "c-only"-files
## OPENPILOT_BL CORE:
SRC += $(OPSYSTEM)/main.c
SRC += $(OPSYSTEM)/pios_board.c
SRC += $(OPSYSTEM)/op_dfu.c
SRC += $(FLIGHTLIB)/stopwatch.c
SRC += $(OPSYSTEM)/ssp.c
## PIOS Hardware (STM32F10x)
SRC += $(PIOSSTM32F10X)/pios_sys.c
SRC += $(PIOSSTM32F10X)/pios_led.c
SRC += $(PIOSSTM32F10X)/pios_delay.c
SRC += $(PIOSSTM32F10X)/pios_usart.c
SRC += $(PIOSSTM32F10X)/pios_irq.c
SRC += $(PIOSSTM32F10X)/pios_spi.c
SRC += $(PIOSSTM32F10X)/pios_debug.c
SRC += $(PIOSSTM32F10X)/pios_gpio.c
# PIOS USB related files (seperated to make code maintenance more easy)
SRC += $(PIOSSTM32F10X)/pios_usb_hid.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_desc.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_istr.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_prop.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_pwr.c
## PIOS Hardware (Common)
SRC += $(PIOSCOMMON)/pios_com.c
SRC += $(PIOSCOMMON)/pios_opahrs_v0.c
SRC += $(PIOSCOMMON)/pios_bl_helper.c
SRC += $(PIOSCOMMON)/pios_iap.c
SRC += $(PIOSCOMMON)/pios_opahrs_proto.c
SRC += $(PIOSCOMMON)/printf-stdarg.c
## Libraries for flight calculations
SRC += $(FLIGHTLIB)/fifo_buffer.c
## CMSIS for STM32
SRC += $(CMSISDIR)/core_cm3.c
SRC += $(CMSISDIR)/system_stm32f10x.c
## Used parts of the STM-Library
SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c
SRC += $(STMSPDSRCDIR)/stm32f10x_crc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c
SRC += $(STMSPDSRCDIR)/stm32f10x_exti.c
SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c
SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c
SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c
SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c
SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dbgmcu.c
SRC += $(STMSPDSRCDIR)/misc.c
## STM32 USB Library
SRC += $(STMUSBSRCDIR)/usb_core.c
SRC += $(STMUSBSRCDIR)/usb_init.c
SRC += $(STMUSBSRCDIR)/usb_int.c
SRC += $(STMUSBSRCDIR)/usb_mem.c
SRC += $(STMUSBSRCDIR)/usb_regs.c
SRC += $(STMUSBSRCDIR)/usb_sil.c
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
# use file-extension c for "c-only"-files
## just for testing, timer.c could be compiled in thumb-mode too
SRCARM =
# List C++ source files here.
# use file-extension .cpp for C++-files (not .C)
CPPSRC =
# List C++ source files here which must be compiled in ARM-Mode.
# use file-extension .cpp for C++-files (not .C)
#CPPSRCARM = $(TARGET).cpp
CPPSRCARM =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = $(PIOSSTM32F10X)/startup_stm32f10x_$(MODEL).S
# List Assembler source files here which must be assembled in ARM-Mode..
ASRCARM =
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS = $(OPSYSTEM)
EXTRAINCDIRS += $(OPSYSTEMINC)
EXTRAINCDIRS += $(OPUAVTALK)
EXTRAINCDIRS += $(OPUAVTALKINC)
EXTRAINCDIRS += $(OPUAVOBJ)
EXTRAINCDIRS += $(OPUAVOBJINC)
EXTRAINCDIRS += $(PIOS)
EXTRAINCDIRS += $(PIOSINC)
EXTRAINCDIRS += $(FLIGHTLIBINC)
EXTRAINCDIRS += $(PIOSSTM32F10X)
EXTRAINCDIRS += $(PIOSCOMMON)
EXTRAINCDIRS += $(PIOSBOARDS)
EXTRAINCDIRS += $(STMSPDINCDIR)
EXTRAINCDIRS += $(STMUSBINCDIR)
EXTRAINCDIRS += $(CMSISDIR)
EXTRAINCDIRS += $(DOSFSDIR)
EXTRAINCDIRS += $(MSDDIR)
EXTRAINCDIRS += $(RTOSINCDIR)
EXTRAINCDIRS += $(APPLIBDIR)
EXTRAINCDIRS += $(RTOSSRCDIR)/portable/GCC/ARM_CM3
# List any extra directories to look for library files here.
# Also add directories where the linker should search for
# includes from linker-script to the list
# Each directory must be seperated by a space.
EXTRA_LIBDIRS =
# Extra Libraries
# Each library-name must be seperated by a space.
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
# EXTRA_LIBS = xyz abc efsl
# for newlib-lpc (file: libnewlibc-lpc.a):
# EXTRA_LIBS = newlib-lpc
EXTRA_LIBS =
# Path to Linker-Scripts
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
ifeq ($(DEBUG),YES)
OPT = 0
else
OPT = s
endif
# Output format. (can be ihex or binary or both)
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
# ihex to create a load-image in Intel hex format
#LOADFORMAT = ihex
#LOADFORMAT = binary
LOADFORMAT = both
# Debugging format.
DEBUGF = dwarf-2
# Place project-specific -D (define) and/or
# -U options for C here.
CDEFS = -DSTM32F10X_$(MODEL)
CDEFS += -DUSE_STDPERIPH_DRIVER
CDEFS += -DUSE_$(BOARD)
ifeq ($(ENABLE_DEBUG_PINS), YES)
CDEFS += -DPIOS_ENABLE_DEBUG_PINS
endif
ifeq ($(ENABLE_AUX_UART), YES)
CDEFS += -DPIOS_ENABLE_AUX_UART
endif
ifeq ($(USE_BOOTLOADER), YES)
CDEFS += -DUSE_BOOTLOADER
endif
# Place project-specific -D and/or -U options for
# Assembler with preprocessor here.
#ADEFS = -DUSE_IRQ_ASM_WRAPPER
ADEFS = -D__ASSEMBLY__
# Compiler flag to set the C Standard level.
# c89 - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99 - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
#-----
# Compiler flags.
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
#
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
ifeq ($(DEBUG),YES)
CFLAGS = -g$(DEBUGF) -DDEBUG
endif
CFLAGS += -O$(OPT)
ifeq ($(DEBUG),NO)
CFLAGS += -ffunction-sections
endif
CFLAGS += -mcpu=$(MCU)
CFLAGS += $(CDEFS)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
CFLAGS += -mapcs-frame
CFLAGS += -fomit-frame-pointer
CFLAGS += -fpromote-loop-indices
CFLAGS += -Wall
CFLAGS += -Werror
CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
# Compiler flags to generate dependency files:
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
# flags only for C
#CONLYFLAGS += -Wnested-externs
CONLYFLAGS += $(CSTANDARD)
# Assembler flags.
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlns: create listing
ASFLAGS = -mcpu=$(MCU) -I. -x assembler-with-cpp
ASFLAGS += $(ADEFS)
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
MATH_LIB = -lm
# Linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -nostartfiles -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections
ifeq ($(DEBUG),NO)
LDFLAGS += -Wl,-static -Wl,-s
endif
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
LDFLAGS += -lc
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# Program
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
# reset target
OOCD_CL+=-c "reset run"
# terminate OOCD after programming
OOCD_CL+=-c shutdown
# Define programs and commands.
REMOVE = $(REMOVE_CMD) -f
###SHELL = sh
###COPY = cp
# List of all source files.
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
# List of all source files without directory and file-extension.
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
# Define all object files.
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
# Define all listing files (used for make clean).
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
# Define all depedency-files (used for make clean).
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
# Default target.
all: build
ifeq ($(LOADFORMAT),ihex)
build: elf hex sym
else
ifeq ($(LOADFORMAT),binary)
build: elf bin sym
else
ifeq ($(LOADFORMAT),both)
build: elf hex bin sym
else
$(error "$(MSG_FORMATERROR) $(FORMAT)")
endif
endif
endif
${OUTDIR}/InitMods.c: Makefile
@echo $(MSG_MODINIT) $(call toprel, $@)
@echo ${quote}// Autogenerated file${quote} > ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, extern unsigned int ${MOD}Initialize(void);}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}void InitModules() {${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, ${MOD}Initialize();}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}}${quote} >> ${OUTDIR}/InitMods.c
# Program the device.
ifeq ($(FLASH_TOOL),OPENOCD)
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
program: $(OUTDIR)/$(TARGET).elf
@echo ${quote}Programming with OPENOCD${quote}
$(OOCD_EXE) $(OOCD_CL)
endif
# Link: create ELF output file from object files.
$(eval $(call LINK_TEMPLATE, $(OUTDIR)/$(TARGET).elf, $(ALLOBJ)))
# Assemble: create object files from assembler source files.
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
# Assemble: create object files from assembler source files. ARM-only
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
# Compile: create object files from C source files.
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
# Compile: create object files from C source files. ARM-only
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
# Compile: create object files from C++ source files.
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
# Compile: create object files from C++ source files. ARM-only
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
# Compile: create assembler files from C source files. ARM/Thumb
$(eval $(call PARTIAL_COMPILE_TEMPLATE, SRC))
# Compile: create assembler files from C source files. ARM only
$(eval $(call PARTIAL_COMPILE_ARM_TEMPLATE, SRCARM))
$(OUTDIR)/$(TARGET).bin.o: $(OUTDIR)/$(TARGET).bin
.PHONY: elf lss sym hex bin bino
elf: $(OUTDIR)/$(TARGET).elf
lss: $(OUTDIR)/$(TARGET).lss
sym: $(OUTDIR)/$(TARGET).sym
hex: $(OUTDIR)/$(TARGET).hex
bin: $(OUTDIR)/$(TARGET).bin
bino: $(OUTDIR)/$(TARGET).bin.o
# Display sizes of sections.
$(eval $(call SIZE_TEMPLATE, $(OUTDIR)/$(TARGET).elf))
.PHONY: size
size: $(OUTDIR)/$(TARGET).elf_size
# Generate Doxygen documents
docs:
doxygen $(DOXYGENDIR)/doxygen.cfg
# Target: clean project.
clean: clean_list
clean_list :
@echo $(MSG_CLEANING)
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).map
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).elf
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).hex
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).sym
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).lss
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin.o
$(V1) $(REMOVE) $(ALLOBJ)
$(V1) $(REMOVE) $(LSTFILES)
$(V1) $(REMOVE) $(DEPFILES)
$(V1) $(REMOVE) $(SRC:.c=.s)
$(V1) $(REMOVE) $(SRCARM:.c=.s)
$(V1) $(REMOVE) $(CPPSRC:.cpp=.s)
$(V1) $(REMOVE) $(CPPSRCARM:.cpp=.s)
# Create output files directory
# all known MS Windows OS define the ComSpec environment variable
ifdef ComSpec
$(shell md $(subst /,\\,$(OUTDIR)) 2>NUL)
else
$(shell mkdir -p $(OUTDIR) 2>/dev/null)
endif
# Include the dependency files.
ifdef ComSpec
-include $(shell md $(subst /,\\,$(OUTDIR))\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
else
-include $(shell mkdir -p $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
endif
# Listing of phony targets.
.PHONY : all build clean clean_list program