rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
3047b8b815
LibrePilot/Makefile
Stacey Sheldon 3047b8b815 makefile: enable extra context when building multiple targets 
Extra message context is also useful even when building more
than one target in the same invocation of make.

This example would enable extra context:
   make fw_coptercontrol bl_coptercontrol
2012-06-03 17:43:14 -04:00

759 lines
26 KiB
Makefile
Raw Blame History

# Set up a default goal
.DEFAULT_GOAL := help
# Set up some macros for common directories within the tree
ROOT_DIR=$(CURDIR)
TOOLS_DIR=$(ROOT_DIR)/tools
BUILD_DIR=$(ROOT_DIR)/build
DL_DIR=$(ROOT_DIR)/downloads
# Clean out undesirable variables from the environment and command-line
# to remove the chance that they will cause problems with our build
define SANITIZE_VAR
$(if $(filter-out undefined,$(origin $(1))),
$(info *NOTE* Sanitized $(2) variable '$(1)' from $(origin $(1)))
MAKEOVERRIDES = $(filter-out $(1)=%,$(MAKEOVERRIDES))
override $(1) :=
unexport $(1)
)
endef
# These specific variables can influence gcc in unexpected (and undesirable) ways
SANITIZE_GCC_VARS := TMPDIR GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH
SANITIZE_GCC_VARS += CFLAGS CPATH C_INCLUDE_PATH CPLUS_INCLUDE_PATH OBJC_INCLUDE_PATH DEPENDENCIES_OUTPUT
$(foreach var, $(SANITIZE_GCC_VARS), $(eval $(call SANITIZE_VAR,$(var),disallowed)))
# These specific variables used to be valid but now they make no sense
SANITIZE_DEPRECATED_VARS := USE_BOOTLOADER
$(foreach var, $(SANITIZE_DEPRECATED_VARS), $(eval $(call SANITIZE_VAR,$(var),deprecated)))
# We almost need to consider autoconf/automake instead of this
# I don't know if windows supports uname :-(
QT_SPEC=win32-g++
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/debug/uavobjgenerator.exe"
UNAME := $(shell uname)
ifeq ($(UNAME), Linux)
QT_SPEC=linux-g++
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/uavobjgenerator"
endif
ifeq ($(UNAME), Darwin)
QT_SPEC=macx-g++
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/uavobjgenerator"
endif
# OpenPilot GCS build configuration (debug | release)
GCS_BUILD_CONF ?= debug
# Set up misc host tools
RM=rm
# Decide on a verbosity level based on the V= parameter
export AT := @
ifndef V
export V0 :=
export V1 := $(AT)
else ifeq ($(V), 0)
export V0 := $(AT)
export V1 := $(AT)
else ifeq ($(V), 1)
endif
.PHONY: help
help:
@echo
@echo " This Makefile is known to work on Linux and Mac in a standard shell environment."
@echo " It also works on Windows by following the instructions in make/winx86/README.txt."
@echo
@echo " Here is a summary of the available targets:"
@echo
@echo " [Tool Installers]"
@echo " qt_sdk_install - Install the QT v4.7.3 tools"
@echo " arm_sdk_install - Install the GNU ARM gcc toolchain"
@echo " openocd_install - Install the OpenOCD JTAG daemon"
@echo " stm32flash_install - Install the stm32flash tool for unbricking boards"
@echo " dfuutil_install - Install the dfu-util tool for unbricking F4-based boards"
@echo
@echo " [Big Hammer]"
@echo " all - Generate UAVObjects, build openpilot firmware and gcs"
@echo " all_flight - Build all firmware, bootloaders and bootloader updaters"
@echo " all_fw - Build only firmware for all boards"
@echo " all_bl - Build only bootloaders for all boards"
@echo " all_bu - Build only bootloader updaters for all boards"
@echo
@echo " all_clean - Remove your build directory ($(BUILD_DIR))"
@echo " all_flight_clean - Remove all firmware, bootloaders and bootloader updaters"
@echo " all_fw_clean - Remove firmware for all boards"
@echo " all_bl_clean - Remove bootlaoders for all boards"
@echo " all_bu_clean - Remove bootloader updaters for all boards"
@echo
@echo " all_<board> - Build all available images for <board>"
@echo " all_<board>_clean - Remove all available images for <board>"
@echo
@echo " [Firmware]"
@echo " <board> - Build firmware for <board>"
@echo " supported boards are ($(ALL_BOARDS))"
@echo " fw_<board> - Build firmware for <board>"
@echo " supported boards are ($(FW_BOARDS))"
@echo " fw_<board>_clean - Remove firmware for <board>"
@echo " fw_<board>_program - Use OpenOCD + JTAG to write firmware to <board>"
@echo
@echo " [Bootloader]"
@echo " bl_<board> - Build bootloader for <board>"
@echo " supported boards are ($(BL_BOARDS))"
@echo " bl_<board>_clean - Remove bootloader for <board>"
@echo " bl_<board>_program - Use OpenOCD + JTAG to write bootloader to <board>"
@echo
@echo " [Bootloader Updater]"
@echo " bu_<board> - Build bootloader updater for <board>"
@echo " supported boards are ($(BU_BOARDS))"
@echo " bu_<board>_clean - Remove bootloader updater for <board>"
@echo
@echo " [Unbrick a board]"
@echo " unbrick_<board> - Use the STM32's built in boot ROM to write a bootloader to <board>"
@echo " supported boards are ($(BL_BOARDS))"
@echo
@echo " [Simulation]"
@echo " sim_osx - Build OpenPilot simulation firmware for OSX"
@echo " sim_osx_clean - Delete all build output for the osx simulation"
@echo " sim_win32 - Build OpenPilot simulation firmware for"
@echo " Windows using mingw and msys"
@echo " sim_win32_clean - Delete all build output for the win32 simulation"
@echo
@echo " [GCS]"
@echo " gcs - Build the Ground Control System (GCS) application"
@echo " gcs_clean - Remove the Ground Control System (GCS) application"
@echo
@echo " [UAVObjects]"
@echo " uavobjects - Generate source files from the UAVObject definition XML files"
@echo " uavobjects_test - parse xml-files - check for valid, duplicate ObjId's, ... "
@echo " uavobjects_<group> - Generate source files from a subset of the UAVObject definition XML files"
@echo " supported groups are ($(UAVOBJ_TARGETS))"
@echo
@echo " Note: All tools will be installed into $(TOOLS_DIR)"
@echo " All build output will be placed in $(BUILD_DIR)"
@echo
.PHONY: all
all: uavobjects all_ground all_flight
.PHONY: all_clean
all_clean:
[ ! -d "$(BUILD_DIR)" ] || $(RM) -rf "$(BUILD_DIR)"
$(DL_DIR):
mkdir -p $@
$(TOOLS_DIR):
mkdir -p $@
$(BUILD_DIR):
mkdir -p $@
###############################################################
#
# Installers for tools required by the ground and flight builds
#
# NOTE: These are not tied to the default goals
# and must be invoked manually
#
###############################################################
# Set up QT toolchain
QT_SDK_DIR := $(TOOLS_DIR)/qtsdk-v1.2
.PHONY: qt_sdk_install
qt_sdk_install: QT_SDK_URL := http://www.developer.nokia.com/dp?uri=http://sw.nokia.com/id/8ea74da4-fec1-4277-8b26-c58cc82e204b/Qt_SDK_Lin32_offline
qt_sdk_install: QT_SDK_FILE := Qt_SDK_Lin32_offline_v1_2_en.run
#qt_sdk_install: QT_SDK_URL := http://www.developer.nokia.com/dp?uri=http://sw.nokia.com/id/c365bbf5-c2b9-4dda-9c1f-34b2c8d07785/Qt_SDK_Lin32_offline_v1_1_2
#qt_sdk_install: QT_SDK_FILE := Qt_SDK_Lin32_offline_v1_1_2_en.run
# order-only prereq on directory existance:
qt_sdk_install : | $(DL_DIR) $(TOOLS_DIR)
qt_sdk_install: qt_sdk_clean
# download the source only if it's newer than what we already have
$(V1) wget -N --content-disposition -P "$(DL_DIR)" "$(QT_SDK_URL)"
# tell the user exactly which path they should select in the GUI
$(V1) echo "*** NOTE NOTE NOTE ***"
$(V1) echo "*"
$(V1) echo "* In the GUI, please use exactly this path as the installation path:"
$(V1) echo "* $(QT_SDK_DIR)"
$(V1) echo "*"
$(V1) echo "*** NOTE NOTE NOTE ***"
#installer is an executable, make it executable and run it
$(V1) chmod u+x "$(DL_DIR)/$(QT_SDK_FILE)"
$(V1) "$(DL_DIR)/$(QT_SDK_FILE)" -style cleanlooks
.PHONY: qt_sdk_clean
qt_sdk_clean:
$(V1) [ ! -d "$(QT_SDK_DIR)" ] || $(RM) -rf $(QT_SDK_DIR)
# Set up ARM (STM32) SDK
ARM_SDK_DIR := $(TOOLS_DIR)/gcc-arm-none-eabi-4_6-2012q1
.PHONY: arm_sdk_install
arm_sdk_install: ARM_SDK_URL := https://launchpad.net/gcc-arm-embedded/4.6/4.6-2012-q1-update/+download/gcc-arm-none-eabi-4_6-2012q1-20120316.tar.bz2
arm_sdk_install: ARM_SDK_FILE := $(notdir $(ARM_SDK_URL))
# order-only prereq on directory existance:
arm_sdk_install: | $(DL_DIR) $(TOOLS_DIR)
arm_sdk_install: arm_sdk_clean
# download the source only if it's newer than what we already have
$(V1) wget --no-check-certificate -N -P "$(DL_DIR)" "$(ARM_SDK_URL)"
# binary only release so just extract it
$(V1) tar -C $(TOOLS_DIR) -xjf "$(DL_DIR)/$(ARM_SDK_FILE)"
.PHONY: arm_sdk_clean
arm_sdk_clean:
$(V1) [ ! -d "$(ARM_SDK_DIR)" ] || $(RM) -r $(ARM_SDK_DIR)
# Set up openocd tools
OPENOCD_DIR := $(TOOLS_DIR)/openocd
OPENOCD_WIN_DIR := $(TOOLS_DIR)/openocd_win
OPENOCD_BUILD_DIR := $(DL_DIR)/openocd-build
.PHONY: openocd_install
openocd_install: | $(DL_DIR) $(TOOLS_DIR)
openocd_install: OPENOCD_URL := http://sourceforge.net/projects/openocd/files/openocd/0.5.0/openocd-0.5.0.tar.bz2/download
openocd_install: OPENOCD_FILE := openocd-0.5.0.tar.bz2
openocd_install: openocd_clean
# download the source only if it's newer than what we already have
$(V1) wget -N -P "$(DL_DIR)" --trust-server-name "$(OPENOCD_URL)"
# extract the source
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -r "$(OPENOCD_BUILD_DIR)"
$(V1) mkdir -p "$(OPENOCD_BUILD_DIR)"
$(V1) tar -C $(OPENOCD_BUILD_DIR) -xjf "$(DL_DIR)/$(OPENOCD_FILE)"
# build and install
$(V1) mkdir -p "$(OPENOCD_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR)/openocd-0.5.0 ; \
./configure --prefix="$(OPENOCD_DIR)" --enable-ft2232_libftdi ; \
$(MAKE) --silent ; \
$(MAKE) --silent install ; \
)
# delete the extracted source when we're done
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -rf "$(OPENOCD_BUILD_DIR)"
.PHONY: ftd2xx_install
FTD2XX_DIR := $(DL_DIR)/ftd2xx
ftd2xx_install: | $(DL_DIR)
ftd2xx_install: FTD2XX_URL := http://www.ftdichip.com/Drivers/CDM/Beta/CDM20817.zip
ftd2xx_install: FTD2XX_FILE := CDM20817.zip
ftd2xx_install: ftd2xx_clean
# download the file only if it's newer than what we already have
$(V0) @echo " DOWNLOAD $(FTD2XX_URL)"
$(V1) wget -q -N -P "$(DL_DIR)" "$(FTD2XX_URL)"
# extract the source
$(V0) @echo " EXTRACT $(FTD2XX_FILE) -> $(FTD2XX_DIR)"
$(V1) mkdir -p "$(FTD2XX_DIR)"
$(V1) unzip -q -d "$(FTD2XX_DIR)" "$(DL_DIR)/$(FTD2XX_FILE)"
.PHONY: ftd2xx_clean
ftd2xx_clean:
$(V0) @echo " CLEAN $(FTD2XX_DIR)"
$(V1) [ ! -d "$(FTD2XX_DIR)" ] || $(RM) -r "$(FTD2XX_DIR)"
.PHONY: ftd2xx_install
LIBUSB_WIN_DIR := $(DL_DIR)/libusb-win32-bin-1.2.6.0
libusb_win_install: | $(DL_DIR)
libusb_win_install: LIBUSB_WIN_URL := http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/1.2.6.0/libusb-win32-bin-1.2.6.0.zip/download
libusb_win_install: LIBUSB_WIN_FILE := libusb-win32-bin-1.2.6.0.zip
libusb_win_install: libusb_win_clean
# download the file only if it's newer than what we already have
$(V0) @echo " DOWNLOAD $(LIBUSB_WIN_URL)"
$(V1) wget -q -N -P "$(DL_DIR)" --trust-server-name "$(LIBUSB_WIN_URL)"
# extract the source
$(V0) @echo " EXTRACT $(LIBUSB_WIN_FILE) -> $(LIBUSB_WIN_DIR)"
$(V1) mkdir -p "$(LIBUSB_WIN_DIR)"
$(V1) unzip -q -d "$(DL_DIR)" "$(DL_DIR)/$(LIBUSB_WIN_FILE)"
# fixup .h file needed by openocd build
$(V0) @echo " FIXUP $(LIBUSB_WIN_DIR)"
$(V1) ln -s "$(LIBUSB_WIN_DIR)/include/lusb0_usb.h" "$(LIBUSB_WIN_DIR)/include/usb.h"
.PHONY: libusb_win_clean
libusb_win_clean:
$(V0) @echo " CLEAN $(LIBUSB_WIN_DIR)"
$(V1) [ ! -d "$(LIBUSB_WIN_DIR)" ] || $(RM) -r "$(LIBUSB_WIN_DIR)"
.PHONY: openocd_git_win_install
openocd_git_win_install: | $(DL_DIR) $(TOOLS_DIR)
openocd_git_win_install: OPENOCD_URL := git://openocd.git.sourceforge.net/gitroot/openocd/openocd
openocd_git_win_install: OPENOCD_REV := f1c0133321c8fcadadd10bba5537c0a634eb183b
openocd_git_win_install: openocd_win_clean libusb_win_install ftd2xx_install
# download the source
$(V0) @echo " DOWNLOAD $(OPENOCD_URL) @ $(OPENOCD_REV)"
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -rf "$(OPENOCD_BUILD_DIR)"
$(V1) mkdir -p "$(OPENOCD_BUILD_DIR)"
$(V1) git clone --no-checkout $(OPENOCD_URL) "$(DL_DIR)/openocd-build"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
git checkout -q $(OPENOCD_REV) ; \
)
# apply patches
$(V0) @echo " PATCH $(OPENOCD_BUILD_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
git apply < $(ROOT_DIR)/flight/Project/OpenOCD/0001-armv7m-remove-dummy-FP-regs-for-new-gdb.patch ; \
git apply < $(ROOT_DIR)/flight/Project/OpenOCD/0002-rtos-add-stm32_stlink-to-FreeRTOS-targets.patch ; \
)
# build and install
$(V0) @echo " BUILD $(OPENOCD_WIN_DIR)"
$(V1) mkdir -p "$(OPENOCD_WIN_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
./bootstrap ; \
./configure --enable-maintainer-mode --prefix="$(OPENOCD_WIN_DIR)" \
--build=i686-pc-linux-gnu --host=i586-mingw32msvc \
CPPFLAGS=-I$(LIBUSB_WIN_DIR)/include \
LDFLAGS=-L$(LIBUSB_WIN_DIR)/lib/gcc \
--enable-ft2232_ftd2xx --with-ftd2xx-win32-zipdir=$(FTD2XX_DIR) \
--disable-werror \
--enable-stlink ; \
$(MAKE) ; \
$(MAKE) install ; \
)
# delete the extracted source when we're done
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -rf "$(OPENOCD_BUILD_DIR)"
.PHONY: openocd_win_clean
openocd_win_clean:
$(V0) @echo " CLEAN $(OPENOCD_WIN_DIR)"
$(V1) [ ! -d "$(OPENOCD_WIN_DIR)" ] || $(RM) -r "$(OPENOCD_WIN_DIR)"
.PHONY: openocd_git_install
openocd_git_install: | $(DL_DIR) $(TOOLS_DIR)
openocd_git_install: OPENOCD_URL := git://openocd.git.sourceforge.net/gitroot/openocd/openocd
openocd_git_install: OPENOCD_REV := f1c0133321c8fcadadd10bba5537c0a634eb183b
openocd_git_install: openocd_clean
# download the source
$(V0) @echo " DOWNLOAD $(OPENOCD_URL) @ $(OPENOCD_REV)"
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -rf "$(OPENOCD_BUILD_DIR)"
$(V1) mkdir -p "$(OPENOCD_BUILD_DIR)"
$(V1) git clone --no-checkout $(OPENOCD_URL) "$(OPENOCD_BUILD_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
git checkout -q $(OPENOCD_REV) ; \
)
# apply patches
$(V0) @echo " PATCH $(OPENOCD_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
git apply < $(ROOT_DIR)/flight/Project/OpenOCD/0001-armv7m-remove-dummy-FP-regs-for-new-gdb.patch ; \
git apply < $(ROOT_DIR)/flight/Project/OpenOCD/0002-rtos-add-stm32_stlink-to-FreeRTOS-targets.patch ; \
)
# build and install
$(V0) @echo " BUILD $(OPENOCD_DIR)"
$(V1) mkdir -p "$(OPENOCD_DIR)"
$(V1) ( \
cd $(OPENOCD_BUILD_DIR) ; \
./bootstrap ; \
./configure --enable-maintainer-mode --prefix="$(OPENOCD_DIR)" --enable-ft2232_libftdi --enable-buspirate --enable-stlink ; \
$(MAKE) ; \
$(MAKE) install ; \
)
# delete the extracted source when we're done
$(V1) [ ! -d "$(OPENOCD_BUILD_DIR)" ] || $(RM) -rf "$(OPENOCD_BUILD_DIR)"
.PHONY: openocd_clean
openocd_clean:
$(V0) @echo " CLEAN $(OPENOCD_DIR)"
$(V1) [ ! -d "$(OPENOCD_DIR)" ] || $(RM) -r "$(OPENOCD_DIR)"
STM32FLASH_DIR := $(TOOLS_DIR)/stm32flash
.PHONY: stm32flash_install
stm32flash_install: STM32FLASH_URL := http://stm32flash.googlecode.com/svn/trunk
stm32flash_install: STM32FLASH_REV := 61
stm32flash_install: stm32flash_clean
# download the source
$(V0) @echo " DOWNLOAD $(STM32FLASH_URL) @ r$(STM32FLASH_REV)"
$(V1) svn export -q -r "$(STM32FLASH_REV)" "$(STM32FLASH_URL)" "$(STM32FLASH_DIR)"
# build
$(V0) @echo " BUILD $(STM32FLASH_DIR)"
$(V1) $(MAKE) --silent -C $(STM32FLASH_DIR) all
.PHONY: stm32flash_clean
stm32flash_clean:
$(V0) @echo " CLEAN $(STM32FLASH_DIR)"
$(V1) [ ! -d "$(STM32FLASH_DIR)" ] || $(RM) -r "$(STM32FLASH_DIR)"
DFUUTIL_DIR := $(TOOLS_DIR)/dfu-util
.PHONY: dfuutil_install
dfuutil_install: DFUUTIL_URL := http://dfu-util.gnumonks.org/releases/dfu-util-0.5.tar.gz
dfuutil_install: DFUUTIL_FILE := $(notdir $(DFUUTIL_URL))
dfuutil_install: | $(DL_DIR) $(TOOLS_DIR)
dfuutil_install: dfuutil_clean
# download the source
$(V0) @echo " DOWNLOAD $(DFUUTIL_URL)"
$(V1) wget -N -P "$(DL_DIR)" "$(DFUUTIL_URL)"
# extract the source
$(V0) @echo " EXTRACT $(DFUUTIL_FILE)"
$(V1) [ ! -d "$(DL_DIR)/dfuutil-build" ] || $(RM) -r "$(DL_DIR)/dfuutil-build"
$(V1) mkdir -p "$(DL_DIR)/dfuutil-build"
$(V1) tar -C $(DL_DIR)/dfuutil-build -xf "$(DL_DIR)/$(DFUUTIL_FILE)"
# build
$(V0) @echo " BUILD $(DFUUTIL_DIR)"
$(V1) mkdir -p "$(DFUUTIL_DIR)"
$(V1) ( \
cd $(DL_DIR)/dfuutil-build/dfu-util-0.5 ; \
./configure --prefix="$(DFUUTIL_DIR)" ; \
$(MAKE) ; \
$(MAKE) install ; \
)
.PHONY: dfuutil_clean
dfuutil_clean:
$(V0) @echo " CLEAN $(DFUUTIL_DIR)"
$(V1) [ ! -d "$(DFUUTIL_DIR)" ] || $(RM) -r "$(DFUUTIL_DIR)"
##############################
#
# Set up paths to tools
#
##############################
ifeq ($(shell [ -d "$(QT_SDK_DIR)" ] && echo "exists"), exists)
QMAKE=$(QT_SDK_DIR)/Desktop/Qt/4.8.0/gcc/bin/qmake
else
# not installed, hope it's in the path...
QMAKE=qmake
endif
ifeq ($(shell [ -d "$(ARM_SDK_DIR)" ] && echo "exists"), exists)
ARM_SDK_PREFIX := $(ARM_SDK_DIR)/bin/arm-none-eabi-
else
# not installed, hope it's in the path...
ARM_SDK_PREFIX ?= arm-none-eabi-
endif
ifeq ($(shell [ -d "$(OPENOCD_DIR)" ] && echo "exists"), exists)
OPENOCD := $(OPENOCD_DIR)/bin/openocd
else
# not installed, hope it's in the path...
OPENOCD ?= openocd
endif
##############################
#
# GCS related components
#
##############################
.PHONY: all_ground
all_ground: openpilotgcs
# Convenience target for the GCS
.PHONY: gcs gcs_clean
gcs: openpilotgcs
gcs_clean: openpilotgcs_clean
.PHONY: openpilotgcs
openpilotgcs: uavobjects_gcs
$(V1) mkdir -p $(BUILD_DIR)/ground/$@
$(V1) ( cd $(BUILD_DIR)/ground/$@ && \
$(QMAKE) $(ROOT_DIR)/ground/openpilotgcs/openpilotgcs.pro -spec $(QT_SPEC) -r CONFIG+=$(GCS_BUILD_CONF) && \
$(MAKE) -w ; \
)
.PHONY: openpilotgcs_clean
openpilotgcs_clean:
$(V0) @echo " CLEAN $@"
$(V1) [ ! -d "$(BUILD_DIR)/ground/openpilotgcs" ] || $(RM) -r "$(BUILD_DIR)/ground/openpilotgcs"
.PHONY: uavobjgenerator
uavobjgenerator:
$(V1) mkdir -p $(BUILD_DIR)/ground/$@
$(V1) ( cd $(BUILD_DIR)/ground/$@ && \
$(QMAKE) $(ROOT_DIR)/ground/uavobjgenerator/uavobjgenerator.pro -spec $(QT_SPEC) -r CONFIG+=debug && \
$(MAKE) --no-print-directory -w ; \
)
UAVOBJ_TARGETS := gcs flight python matlab java
.PHONY:uavobjects
uavobjects: $(addprefix uavobjects_, $(UAVOBJ_TARGETS))
UAVOBJ_XML_DIR := $(ROOT_DIR)/shared/uavobjectdefinition
UAVOBJ_OUT_DIR := $(BUILD_DIR)/uavobject-synthetics
$(UAVOBJ_OUT_DIR):
$(V1) mkdir -p $@
uavobjects_%: $(UAVOBJ_OUT_DIR) uavobjgenerator
$(V1) ( cd $(UAVOBJ_OUT_DIR) && \
$(UAVOBJGENERATOR) -$* $(UAVOBJ_XML_DIR) $(ROOT_DIR) ; \
)
uavobjects_test: $(UAVOBJ_OUT_DIR) uavobjgenerator
$(V1) $(UAVOBJGENERATOR) -v -none $(UAVOBJ_XML_DIR) $(ROOT_DIR)
uavobjects_clean:
$(V0) @echo " CLEAN $@"
$(V1) [ ! -d "$(UAVOBJ_OUT_DIR)" ] || $(RM) -r "$(UAVOBJ_OUT_DIR)"
##############################
#
# Flight related components
#
##############################
# $(1) = Canonical board name all in lower case (e.g. coptercontrol)
# $(2) = Name of board used in source tree (e.g. CopterControl)
# $(3) = Short name for board (e.g CC)
define FW_TEMPLATE
.PHONY: $(1) fw_$(1)
$(1): fw_$(1)_opfw
fw_$(1): fw_$(1)_opfw
fw_$(1)_%: uavobjects_flight
$(V1) mkdir -p $(BUILD_DIR)/fw_$(1)/dep
$(V1) cd $(ROOT_DIR)/flight/$(2) && \
$$(MAKE) -r --no-print-directory \
BOARD_NAME=$(1) \
BOARD_SHORT_NAME=$(3) \
BUILD_TYPE=fw \
TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" \
REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" \
$$*
.PHONY: $(1)_clean
$(1)_clean: fw_$(1)_clean
fw_$(1)_clean:
$(V0) @echo " CLEAN $$@"
$(V1) $(RM) -fr $(BUILD_DIR)/fw_$(1)
endef
# $(1) = Canonical board name all in lower case (e.g. coptercontrol)
# $(2) = Name of board used in source tree (e.g. CopterControl)
define BL_TEMPLATE
.PHONY: bl_$(1)
bl_$(1): bl_$(1)_bin
bl_$(1)_bino: bl_$(1)_bin
bl_$(1)_%:
$(V1) mkdir -p $(BUILD_DIR)/bl_$(1)/dep
$(V1) cd $(ROOT_DIR)/flight/Bootloaders/$(2) && \
$$(MAKE) -r --no-print-directory \
BOARD_NAME=$(1) \
BOARD_SHORT_NAME=$(3) \
BUILD_TYPE=bl \
TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" \
REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" \
$$*
.PHONY: unbrick_$(1)
unbrick_$(1): bl_$(1)_hex
$(if $(filter-out undefined,$(origin UNBRICK_TTY)),
$(V0) @echo " UNBRICK $(1) via $$(UNBRICK_TTY)"
$(V1) $(STM32FLASH_DIR)/stm32flash \
-w $(BUILD_DIR)/bl_$(1)/bl_$(1).hex \
-g 0x0 \
$$(UNBRICK_TTY)
,
$(V0) @echo
$(V0) @echo "ERROR: You must specify UNBRICK_TTY=<serial-device> to use for unbricking."
$(V0) @echo " eg. $$(MAKE) $$@ UNBRICK_TTY=/dev/ttyUSB0"
)
.PHONY: bl_$(1)_clean
bl_$(1)_clean:
$(V0) @echo " CLEAN $$@"
$(V1) $(RM) -fr $(BUILD_DIR)/bl_$(1)
endef
# $(1) = Canonical board name all in lower case (e.g. coptercontrol)
define BU_TEMPLATE
.PHONY: bu_$(1)
bu_$(1): bu_$(1)_opfw
bu_$(1)_%: bl_$(1)_bino
$(V1) mkdir -p $(BUILD_DIR)/bu_$(1)/dep
$(V1) cd $(ROOT_DIR)/flight/Bootloaders/BootloaderUpdater && \
$$(MAKE) -r --no-print-directory \
BOARD_NAME=$(1) \
BOARD_SHORT_NAME=$(3) \
BUILD_TYPE=bu \
TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" \
REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" \
$$*
.PHONY: bu_$(1)_clean
bu_$(1)_clean:
$(V0) @echo " CLEAN $$@"
$(V1) $(RM) -fr $(BUILD_DIR)/bu_$(1)
endef
# $(1) = Canonical board name all in lower case (e.g. coptercontrol)
define EF_TEMPLATE
.PHONY: ef_$(1)
ef_$(1): ef_$(1)_bin
ef_$(1)_%: bl_$(1)_bin fw_$(1)_opfw
$(V1) mkdir -p $(BUILD_DIR)/ef_$(1)/dep
$(V1) cd $(ROOT_DIR)/flight/EntireFlash && \
$$(MAKE) -r --no-print-directory \
BOARD_NAME=$(1) \
BOARD_SHORT_NAME=$(3) \
BUILD_TYPE=ef \
TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" \
DFU_CMD="$(DFUUTIL_DIR)/bin/dfu-util" \
$$*
.PHONY: ef_$(1)_clean
ef_$(1)_clean:
$(V0) @echo " CLEAN $$@"
$(V1) $(RM) -fr $(BUILD_DIR)/ef_$(1)
endef
# When building any of the "all_*" targets, tell all sub makefiles to display
# additional details on each line of output to describe which build and target
# that each line applies to.
ifneq ($(strip $(filter all_%,$(MAKECMDGOALS))),)
export ENABLE_MSG_EXTRA := yes
endif
# When building more than one goal in a single make invocation, also
# enable the extra context for each output line
ifneq ($(word 2,$(MAKECMDGOALS)),)
export ENABLE_MSG_EXTRA := yes
endif
# $(1) = Canonical board name all in lower case (e.g. coptercontrol)
define BOARD_PHONY_TEMPLATE
.PHONY: all_$(1)
all_$(1): $$(filter fw_$(1), $$(FW_TARGETS))
all_$(1): $$(filter bl_$(1), $$(BL_TARGETS))
all_$(1): $$(filter bu_$(1), $$(BU_TARGETS))
all_$(1): $$(filter ef_$(1), $$(EF_TARGETS))
.PHONY: all_$(1)_clean
all_$(1)_clean: $$(addsuffix _clean, $$(filter fw_$(1), $$(FW_TARGETS)))
all_$(1)_clean: $$(addsuffix _clean, $$(filter bl_$(1), $$(BL_TARGETS)))
all_$(1)_clean: $$(addsuffix _clean, $$(filter bu_$(1), $$(BU_TARGETS)))
all_$(1)_clean: $$(addsuffix _clean, $$(filter ef_$(1), $$(EF_TARGETS)))
endef
ALL_BOARDS := coptercontrol pipxtreme revolution simposix osd
# SimPosix only builds on Linux so drop it from the list for
# all other platforms.
ifneq ($(UNAME), Linux)
ALL_BOARDS := $(filter-out simposix, $(ALL_BOARDS))
endif
# Friendly names of each board (used to find source tree)
coptercontrol_friendly := CopterControl
pipxtreme_friendly := PipXtreme
revolution_friendly := Revolution
simposix_friendly := SimPosix
osd_friendly := OSD
# Short hames of each board (used to display board name in parallel builds)
coptercontrol_short := 'cc '
pipxtreme_short := 'pipx'
revolution_short := 'revo'
simposix_short := 'posx'
osd_short := 'osd '
# Start out assuming that we'll build fw, bl and bu for all boards
FW_BOARDS := $(ALL_BOARDS)
BL_BOARDS := $(ALL_BOARDS)
BU_BOARDS := $(ALL_BOARDS)
EF_BOARDS := $(ALL_BOARDS)
# FIXME: The BU image doesn't work for F4 boards so we need to
# filter them out to prevent errors.
BU_BOARDS := $(filter-out revolution osd, $(BU_BOARDS))
# SimPosix doesn't have a BL, BU or EF target so we need to
# filter them out to prevent errors on the all_flight target.
BL_BOARDS := $(filter-out simposix, $(BL_BOARDS))
BU_BOARDS := $(filter-out simposix, $(BU_BOARDS))
EF_BOARDS := $(filter-out simposix, $(EF_BOARDS))
# Generate the targets for whatever boards are left in each list
FW_TARGETS := $(addprefix fw_, $(FW_BOARDS))
BL_TARGETS := $(addprefix bl_, $(BL_BOARDS))
BU_TARGETS := $(addprefix bu_, $(BU_BOARDS))
EF_TARGETS := $(addprefix ef_, $(EF_BOARDS))
.PHONY: all_fw all_fw_clean
all_fw: $(addsuffix _opfw, $(FW_TARGETS))
all_fw_clean: $(addsuffix _clean, $(FW_TARGETS))
.PHONY: all_bl all_bl_clean
all_bl: $(addsuffix _bin, $(BL_TARGETS))
all_bl_clean: $(addsuffix _clean, $(BL_TARGETS))
.PHONY: all_bu all_bu_clean
all_bu: $(addsuffix _opfw, $(BU_TARGETS))
all_bu_clean: $(addsuffix _clean, $(BU_TARGETS))
.PHONY: all_ef all_ef_clean
all_ef: $(EF_TARGETS)
all_ef_clean: $(addsuffix _clean, $(EF_TARGETS))
.PHONY: all_flight all_flight_clean
all_flight: all_fw all_bl all_bu all_ef
all_flight_clean: all_fw_clean all_bl_clean all_bu_clean all_ef_clean
# Expand the groups of targets for each board
$(foreach board, $(ALL_BOARDS), $(eval $(call BOARD_PHONY_TEMPLATE,$(board))))
# Expand the bootloader updater rules
$(foreach board, $(ALL_BOARDS), $(eval $(call BU_TEMPLATE,$(board),$($(board)_friendly),$($(board)_short))))
# Expand the firmware rules
$(foreach board, $(ALL_BOARDS), $(eval $(call FW_TEMPLATE,$(board),$($(board)_friendly),$($(board)_short))))
# Expand the bootloader rules
$(foreach board, $(ALL_BOARDS), $(eval $(call BL_TEMPLATE,$(board),$($(board)_friendly),$($(board)_short))))
# Expand the entire-flash rules
$(foreach board, $(ALL_BOARDS), $(eval $(call EF_TEMPLATE,$(board),$($(board)_friendly),$($(board)_short))))
.PHONY: sim_win32
sim_win32: sim_win32_exe
sim_win32_%: uavobjects_flight
$(V1) mkdir -p $(BUILD_DIR)/sitl_win32
$(V1) $(MAKE) --no-print-directory \
-C $(ROOT_DIR)/flight/OpenPilot --file=$(ROOT_DIR)/flight/OpenPilot/Makefile.win32 $*
.PHONY: sim_osx
sim_osx: sim_osx_elf
sim_osx_%: uavobjects_flight
$(V1) mkdir -p $(BUILD_DIR)/sim_osx
$(V1) $(MAKE) --no-print-directory \
-C $(ROOT_DIR)/flight/Revolution --file=$(ROOT_DIR)/flight/Revolution/Makefile.osx $*
##############################
#
# Packaging components
#
##############################
.PHONY: package
package:
$(V1) cd $@ && $(MAKE) --no-print-directory $@
Reference in New Issue View Git Blame Copy Permalink