peabody124 c07e1416b7 AHRS: Serial output option for AHRS and corresponding serial logger. ...

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1414 ebee16cc-31ac-478f-84a7-5cbb03baadba

2010-08-26 06:25:11 +00:00

..

inc

[OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.

2010-08-19 20:38:27 +00:00

ahrs_fsm.c

ahrs spi: Add AHRS SPI link management FSM

2010-07-04 02:21:22 +00:00

ahrs.c

AHRS: Serial output option for AHRS and corresponding serial logger.

2010-08-26 06:25:11 +00:00

insgps.c

AHRS: Fixed another bug in decimation code - I stupidly used Matlab 1 based indexing. Adjusted timing of AHRS so it can process all the data and doesn't miss updates. Finally adjust all inputs to INS to have correct sign and orientation (I think). This is X is forward, Y is right, and Z is down which is mentioned in the forum as our standard and fits the algorithm. The magnetic sensor driver should be modified to return in this order (currently reads X,Y,Z registers which maps to left, back, up) but maybe since it's a board dependent orientation it's better where it is.

2010-08-18 05:47:44 +00:00

MagOrAccelSensorCal.c

Six point sensor cal for accels and/or mags

2010-08-17 19:02:07 +00:00

Makefile

[OP-119] Flight/AHRS: Created a HomeLocation object which is updated when the GPS gets an initial 3D fix and populated with the information to convert from LLA from the GPS to NED reference frame. Also added a message for passing the MagneticNorth vector to the AHRS and removed that computation from AHRS.

2010-08-19 20:38:27 +00:00

pios_board.c

i2c: rewrite i2c layer

2010-08-08 04:15:08 +00:00

test.c

Added a testing function for INS - currently doesn't stabilize for fixed inputs. Fixed two bugs I found in INSGPS (R[10] instead of R[9] initialized and Nav.Pos[2] was set to wrong X element).

2010-08-16 16:58:20 +00:00