peabody124 4b4a66c2d7 PiOS/I2C: Lots of small changes. Added a few weird bus events that are ... sometimes thrown, and made errors not lock it up by default. It works for me, but since this has historically been associated with lots of lock ups please check your systems carefully. PiOS/I2C: Make the bus by default try to recover from errors instead of locking up PiOS/I2C: After a bus error and clocking all previous data create a STOP condition to make sure bus is released (note, this also requires creating a START condition first) PiOS/I2C: If the same event hits the I2C bus twice in a row then disregard second one, there is no situation where we should get the same event multiple times that matters and this gets us out really quickly to catch the real events. I was seeing this with repeated 0x70084 which means byte transmitted. This is related to STM32 bugs in the IRQ timings I believe. PiOS/I2C: 1) Mask out some bits we don't care about in the event flags 2) Don't lock up if the give semaphore fails, although why it does is strange 3) Recover from bus failure through the "auto" state path instead of just coding state PiOS/I2C: Change the reset bus code to follow http://www.analog.com/static/imported-files/application_notes/54305147357414AN686_0.pdf (thanks for the reference Neontangerine). Although this may actually NOT clear the bus the first time through, subsequent bus errors should eventually clock it out. The up side is it is less likely to clock a bunch of 1s into an ESC and make it run up. PiOS/I2C: Some cleaned up code for getting a snippet of the history when something strange happens PiOS/I2C: Export logging information from I2C through a UAV object PiOS/I2C: Improve the diagnostic information PiOS/I2C: Need to handle the event 0x30084. This seems to happen between a byte transmitted and new byte started PiOS/I2C: Handle the NACK condition by simply going to the stopping state. PiOS/I2C: Add a new NACK state to handle sending the STOP signal after a NACK following the STM documentation. Other error conditions still are not dealt with. PiOS/I2C: Should handle the NACK condition from all the write cases. Need to think about read cases git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2239 ebee16cc-31ac-478f-84a7-5cbb03baadba		2010-12-17 07:01:58 +00:00
..
OpenPilotOSX.xcodeproj	PiOS/I2C: Lots of small changes. Added a few weird bus events that are	2010-12-17 07:01:58 +00:00
.gdbinit	XCode project file for Mac development (for the Posix port)	2010-07-07 14:28:48 +00:00