.. |
libraries
|
OP-1079 - Update to FreeRTOS v7.5.2
|
2013-09-04 20:26:23 -07:00 |
pios_adxl345.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_bma180.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_bmp085.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_board_info.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_com_msg.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_com.c
|
OP-1218 locks SendBuffer under the same mutex as SendBufferNonBlocking
|
2014-02-09 19:57:05 +01:00 |
pios_crc.c
|
OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)
|
2014-01-12 15:12:41 +01:00 |
pios_debuglog.c
|
Just uncrustification
|
2013-11-26 00:43:02 +01:00 |
pios_deltatime.c
|
OP-1211 removed unneeded define
|
2014-02-06 19:34:34 +01:00 |
pios_dosfs_logfs.c
|
Make use of (now supported) standard snprintf in stdarg-printf when used in logfs
|
2013-11-17 02:49:53 +01:00 |
pios_etasv3.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flash_jedec.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_flashfs_logfs.c
|
Uncrustify
|
2013-06-18 20:23:46 +02:00 |
pios_gcsrcvr.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_hcsr04.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_hmc5843.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_hmc5883.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_i2c_esc.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_iap.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_l3gd20.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_led.c
|
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
|
2013-07-28 07:01:08 -07:00 |
pios_mpu6000.c
|
OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes
|
2013-07-28 01:16:22 +09:30 |
pios_mpxv.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_ms5611.c
|
OP-1149 change POW2 as POW2(0) led to undefined results
|
2014-02-09 12:05:40 +01:00 |
pios_oplinkrcvr.c
|
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
|
2013-06-26 17:56:20 -07:00 |
pios_rcvr.c
|
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
|
2013-06-26 17:56:10 -07:00 |
pios_rfm22b_com.c
|
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
|
2013-06-26 18:01:54 -07:00 |
pios_rfm22b.c
|
OP-1195 increase priority for pios radio link driver task
|
2014-02-02 14:09:50 +01:00 |
pios_sbus.c
|
Adding R7008SB end byte as a possible end of frame check for S.Bus
|
2014-01-03 18:25:44 +01:00 |
pios_sdcard.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_task_monitor.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_desc_hid_cdc.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_desc_hid_only.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_usb_util.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_video.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
pios_wavplay.c
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |