mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-30 08:24:11 +01:00
83 lines
3.6 KiB
Plaintext
83 lines
3.6 KiB
Plaintext
Short summary of changes. For a complete list see the git log.
|
|
|
|
2011-11-04
|
|
New Spektrum/JR satellite receiver driver implementation.
|
|
It now provides explicit selection of DSM2 (and DSMJ), DSMX (10bit) and
|
|
DSMX (11bit) serial protocol variations to better serve different frame
|
|
and resolution modes. The protocol name used now is DSM instead of
|
|
previously used Spektrum to make it less ambiguous when used with JR
|
|
2.4GHz radios.
|
|
|
|
2011-10-20
|
|
Inputs can be remapped to outputs to allow up to 10 channels of control. The
|
|
receiver inputs remap as follows:
|
|
Receiver 3 because output channel 7
|
|
Receiver 4 because output channel 8
|
|
Receiver 5 because output channel 9
|
|
Receiver 6 because output channel 10
|
|
|
|
2011-10-11
|
|
Fix for the Mac telemetry rates and specifically how long enumeration took.
|
|
|
|
2011-10-08
|
|
Make the flash chip need to be have bad magic for a full second before erasing
|
|
settings. Should avoid random lost settings.
|
|
|
|
2011-09-12
|
|
Max rate now ONLY applies to attitude and axis lock mode. Manual rate is the
|
|
only term that limits the rate mode now (and in axis lock when you push stick
|
|
only manual rate applies). Also integrals are reset when unused.
|
|
|
|
2011-09-09
|
|
Some large updates to the input system. Now multiple receivers can be
|
|
connected at once. A wizard was added for configuring the input channels. A
|
|
specific collective pitch channel was added.
|
|
|
|
2011-09-04
|
|
Improvements to the failsafe handling code for inputs. PWM power off is now
|
|
detected properly. Powering on transmitter for Spektrum Satellite no longer
|
|
causes a glitch on servos.
|
|
|
|
2011-08-10
|
|
Added Camera Stabilization and a gui to configure this. This is a software
|
|
selectable module from the GUI. However, a restart is required to make it
|
|
active. The GUI does not currently expose the configuration for using the
|
|
transmitter to change the view angle but this is supported by the hardware.
|
|
|
|
2011-08-10
|
|
By default a lot of diagnostic objects that were enabled by default are now
|
|
disabled in the build. This include TaskInfo (and all the FreeRTOS options
|
|
that provide that debugging information). Also MixerStatus, I2CStatus,
|
|
WatchdogStatus and RateDesired. These can be reenabled for debugging with
|
|
-DDIAGNOSTICS.
|
|
|
|
2011-08-04
|
|
Fixed packaging aesthetic issues. Also avoid runtime issues on OSX Lion by
|
|
disabling the ModelView and Notify plugins for now (sorry).
|
|
|
|
2011-07-29
|
|
Added support for PPM receivers from James W. Now all 4 interfaces (R/C
|
|
standard PWM, combined PPM (MK), Spektrum satellite, Futaba S.Bus) are
|
|
supported and configurable through the GCS hardware configuration tab.
|
|
|
|
2011-07-17
|
|
Updated module initialization from Mathieu which separates the initialization
|
|
from the task startup. Also implements a method to reclaim unused ram from
|
|
initialization and end of memory for the FreeRTOS heap.
|
|
|
|
2011-07-12
|
|
Improvements to the stabilization code. Included a LPF on the gyros to smooth
|
|
out noise in high vibration environments. Also two new modes: axis-lock and
|
|
weak leveling. Axis-lock will try and hold an axis at a fixed position and
|
|
reject any disturbances. This is like heading-hold on a heli for the tail but
|
|
can be useful for other axes. Weak leveling is rate mode with a weak
|
|
correction to self level the craft - good for easier rate mode flying.
|
|
|
|
2011-07-07
|
|
Dynamic hardware configuration from Stac. The input type is now
|
|
selected from ManualControlSettings.InputMode and the aircraft must be rebooted
|
|
after changing this. Also for CopterControl the HwSettings object must
|
|
indicate which modules are connected to which ports. PPM currently not
|
|
working.
|
|
|