mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-30 08:24:11 +01:00
d6e2a72e60
Use 'make gcs GCS_BUILD_CONF=release' to build release binaries. Default is to build debug version (was hard-coded). git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2990 ebee16cc-31ac-478f-84a7-5cbb03baadba
387 lines
13 KiB
Makefile
387 lines
13 KiB
Makefile
# Set up some macros for common directories within the tree
|
|
ROOT_DIR=$(CURDIR)
|
|
TOOLS_DIR=$(ROOT_DIR)/tools
|
|
BUILD_DIR=$(ROOT_DIR)/build
|
|
DL_DIR=$(ROOT_DIR)/downloads
|
|
|
|
# We almost need to consider autoconf/automake instead of this
|
|
# I don't know if windows supports uname :-(
|
|
QT_SPEC=win32-g++
|
|
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/debug/uavobjgenerator.exe"
|
|
UNAME := $(shell uname)
|
|
ifeq ($(UNAME), Linux)
|
|
QT_SPEC=linux-g++
|
|
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/uavobjgenerator"
|
|
endif
|
|
ifeq ($(UNAME), Darwin)
|
|
QT_SPEC=macx-g++
|
|
UAVOBJGENERATOR="$(BUILD_DIR)/ground/uavobjgenerator/uavobjgenerator"
|
|
endif
|
|
|
|
# OpenPilot GCS build configuration (debug | release)
|
|
GCS_BUILD_CONF ?= debug
|
|
|
|
# Set up misc host tools
|
|
RM=rm
|
|
|
|
# Decide on a verbosity level based on the V= parameter
|
|
export AT := @
|
|
|
|
ifndef V
|
|
export V0 :=
|
|
export V1 := $(AT)
|
|
else ifeq ($(V), 0)
|
|
export V0 := $(AT)
|
|
export V1 := $(AT)
|
|
else ifeq ($(V), 1)
|
|
endif
|
|
|
|
.PHONY: areyousureyoushouldberunningthis
|
|
areyousureyoushouldberunningthis:
|
|
@echo
|
|
@echo " This Makefile will probably only work on Linux and Mac right now."
|
|
@echo " If you're sure you want to be using this, you may wish to try the following targets:"
|
|
@echo
|
|
@echo " [Tool Installers]"
|
|
@echo " qt_sdk_install - Install the QT v4.6.2 tools"
|
|
@echo " arm_sdk_install - Install the Code Sourcery ARM gcc toolchain"
|
|
@echo " openocd_install - Install the OpenOCD JTAG daemon"
|
|
@echo
|
|
@echo " [Big Hammer]"
|
|
@echo " all - Generate UAVObjects, build openpilot firmware and gcs"
|
|
@echo " all_clean - Remove your build directory ($(BUILD_DIR))"
|
|
@echo
|
|
@echo " [Firmware]"
|
|
@echo " openpilot - Build firmware for the OpenPilot board"
|
|
@echo " openpilot_clean - Delete all build output for the OpenPilot firmware"
|
|
@echo " openpilot_program - Program the firmware onto the OpenPilot board"
|
|
@echo " ahrs - Build firmware for the AHRS board"
|
|
@echo " ahrs_clean - Delete all build output for the AHRS firmware"
|
|
@echo " ahrs_program - Program the firmware onto the AHRS board"
|
|
@echo " coptercontrol - Build firmware for the CopterControl board"
|
|
@echo
|
|
@echo " NOTE: To build firmware to be chain loaded from a bootloader, use"
|
|
@echo " make openpilot USE_BOOTLOADER=YES"
|
|
@echo " Don't forget to do a clean between builds with/without bootloader"
|
|
@echo
|
|
@echo " [Simulation]"
|
|
@echo " sim_posix - Build OpenPilot simulation firmware for"
|
|
@echo " a POSIX compatible system (Linux, Mac OS X, ...)"
|
|
@echo " sim_posix_clean - Delete all build output for the POSIX simulation"
|
|
@echo " sim_win32 - Build OpenPilot simulation firmware for"
|
|
@echo " Windows using mingw and msys"
|
|
@echo " sim_win32_clean - Delete all build output for the win32 simulation"
|
|
@echo
|
|
@echo " [GCS]"
|
|
@echo " gcs - Build the Ground Control System application"
|
|
@echo
|
|
@echo " [UAVObjects]"
|
|
@echo " uavobjects - Generate source files from the UAVObject definition XML files"
|
|
@echo " uavobjects_test - parse xml-files - check for valid, duplicate ObjId's, ... "
|
|
@echo " uavobjects_flight - Generate flight source files from the UAVObject definition XML files"
|
|
@echo " uavobjects_gcs - Generate groundstation source files from the UAVObject definition XML files"
|
|
@echo " uavobjects_python - Generate python source files from the UAVObject definition XML files"
|
|
@echo " uavobjects_matlab - Generate matlab source files from the UAVObject definition XML files"
|
|
@echo
|
|
@echo " Note: All tools will be installed into $(TOOLS_DIR)"
|
|
@echo " All build output will be placed in $(BUILD_DIR)"
|
|
@echo
|
|
|
|
.PHONY: all
|
|
all: uavobjects all_ground all_flight
|
|
|
|
.PHONY: all_clean
|
|
all_clean:
|
|
[ ! -d "$(BUILD_DIR)" ] || $(RM) -rf "$(BUILD_DIR)"
|
|
|
|
$(DL_DIR):
|
|
mkdir -p $@
|
|
|
|
$(TOOLS_DIR):
|
|
mkdir -p $@
|
|
|
|
$(BUILD_DIR):
|
|
mkdir -p $@
|
|
|
|
###############################################################
|
|
#
|
|
# Installers for tools required by the ground and flight builds
|
|
#
|
|
# NOTE: These are not tied to the default goals
|
|
# and must be invoked manually
|
|
#
|
|
###############################################################
|
|
|
|
# Set up QT toolchain
|
|
QT_SDK_DIR := $(TOOLS_DIR)/qtsdk-2010.02
|
|
|
|
.PHONY: qt_sdk_install
|
|
qt_sdk_install: QT_SDK_URL := http://get.qt.nokia.com/qtsdk/qt-sdk-linux-x86-opensource-2010.02.bin
|
|
qt_sdk_install: QT_SDK_FILE := $(notdir $(QT_SDK_URL))
|
|
qt_sdk_install: qt_sdk_clean $(TOOLS_DIR)
|
|
# download the source only if it's newer than what we already have
|
|
$(V1) wget -N -P "$(DL_DIR)" "$(QT_SDK_URL)"
|
|
|
|
#installer is an executable, make it executable and run it
|
|
$(V1) chmod u+x "$(DL_DIR)/$(QT_SDK_FILE)"
|
|
"$(DL_DIR)/$(QT_SDK_FILE)" --installdir "$(QT_SDK_DIR)"
|
|
|
|
.PHONY: qt_sdk_clean
|
|
qt_sdk_clean:
|
|
$(V1) [ ! -d "$(QT_SDK_DIR)" ] || $(RM) -rf $(QT_SDK_DIR)
|
|
|
|
# Set up ARM (STM32) SDK
|
|
ARM_SDK_DIR := $(TOOLS_DIR)/arm-2009q3
|
|
|
|
.PHONY: arm_sdk_install
|
|
arm_sdk_install: ARM_SDK_URL := http://www.codesourcery.com/sgpp/lite/arm/portal/package5353/public/arm-none-eabi/arm-2009q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
|
|
arm_sdk_install: ARM_SDK_FILE := $(notdir $(ARM_SDK_URL))
|
|
arm_sdk_install: arm_sdk_clean $(TOOLS_DIR)
|
|
# download the source only if it's newer than what we already have
|
|
$(V1) wget -N -P "$(DL_DIR)" "$(ARM_SDK_URL)"
|
|
|
|
# binary only release so just extract it
|
|
$(V1) tar -C $(TOOLS_DIR) -xjf "$(DL_DIR)/$(ARM_SDK_FILE)"
|
|
|
|
.PHONY: arm_sdk_clean
|
|
arm_sdk_clean:
|
|
$(V1) [ ! -d "$(ARM_SDK_DIR)" ] || $(RM) -r $(ARM_SDK_DIR)
|
|
|
|
# Set up openocd tools
|
|
OPENOCD_DIR := $(TOOLS_DIR)/openocd
|
|
|
|
.PHONY: openocd_install
|
|
openocd_install: OPENOCD_URL := http://sourceforge.net/projects/openocd/files/openocd/0.4.0/openocd-0.4.0.tar.bz2/download
|
|
openocd_install: OPENOCD_FILE := openocd-0.4.0.tar.bz2
|
|
openocd_install: openocd_clean $(TOOLS_DIR)
|
|
# download the source only if it's newer than what we already have
|
|
$(V1) wget -N -P "$(DL_DIR)" --trust-server-name "$(OPENOCD_URL)"
|
|
|
|
# extract the source
|
|
$(V1) [ ! -d "$(DL_DIR)/openocd-build" ] || $(RM) -r "$(DL_DIR)/openocd-build"
|
|
$(V1) mkdir -p "$(DL_DIR)/openocd-build"
|
|
$(V1) tar -C $(DL_DIR)/openocd-build -xjf "$(DL_DIR)/$(OPENOCD_FILE)"
|
|
|
|
# build and install
|
|
$(V1) mkdir -p "$(OPENOCD_DIR)"
|
|
$(V1) ( \
|
|
cd $(DL_DIR)/openocd-build/openocd-0.4.0 ; \
|
|
./configure --prefix="$(OPENOCD_DIR)" --enable-ft2232_libftdi ; \
|
|
$(MAKE) ; \
|
|
$(MAKE) install ; \
|
|
)
|
|
|
|
# delete the extracted source when we're done
|
|
$(V1) [ ! -d "$(DL_DIR)/openocd-build" ] || $(RM) -r "$(DL_DIR)/openocd-build"
|
|
|
|
.PHONY: openocd_clean
|
|
openocd_clean:
|
|
$(V1) [ ! -d "$(OPENOCD_DIR)" ] || $(RM) -r "$(OPENOCD_DIR)"
|
|
|
|
##############################
|
|
#
|
|
# Set up paths to tools
|
|
#
|
|
##############################
|
|
|
|
ifeq ($(shell [ -d "$(QT_SDK_DIR)" ] && echo "exists"), exists)
|
|
QMAKE=$(QT_SDK_DIR)/qt/bin/qmake
|
|
else
|
|
# not installed, hope it's in the path...
|
|
QMAKE=qmake
|
|
endif
|
|
|
|
ifeq ($(shell [ -d "$(ARM_SDK_DIR)" ] && echo "exists"), exists)
|
|
ARM_SDK_PREFIX := $(ARM_SDK_DIR)/bin/arm-none-eabi-
|
|
else
|
|
# not installed, hope it's in the path...
|
|
ARM_SDK_PREFIX ?= arm-none-eabi-
|
|
endif
|
|
|
|
ifeq ($(shell [ -d "$(OPENOCD_DIR)" ] && echo "exists"), exists)
|
|
OPENOCD := $(OPENOCD_DIR)/bin/openocd
|
|
else
|
|
# not installed, hope it's in the path...
|
|
OPENOCD ?= openocd
|
|
endif
|
|
|
|
##############################
|
|
#
|
|
# GCS related components
|
|
#
|
|
##############################
|
|
|
|
.PHONY: all_ground
|
|
all_ground: openpilotgcs
|
|
|
|
# Convenience target for the GCS
|
|
.PHONY: gcs
|
|
gcs: openpilotgcs
|
|
|
|
.PHONY: openpilotgcs
|
|
openpilotgcs: uavobjects_gcs
|
|
$(V1) mkdir -p $(BUILD_DIR)/ground/$@
|
|
$(V1) ( cd $(BUILD_DIR)/ground/$@ ; \
|
|
$(QMAKE) $(ROOT_DIR)/ground/openpilotgcs/openpilotgcs.pro -spec $(QT_SPEC) -r CONFIG+=$(GCS_BUILD_CONF) ; \
|
|
$(MAKE) -w ; \
|
|
)
|
|
|
|
.PHONY: uavobjgenerator
|
|
uavobjgenerator:
|
|
$(V1) mkdir -p $(BUILD_DIR)/ground/$@
|
|
$(V1) ( cd $(BUILD_DIR)/ground/$@ ; \
|
|
$(QMAKE) $(ROOT_DIR)/ground/uavobjgenerator/uavobjgenerator.pro -spec $(QT_SPEC) -r CONFIG+=debug ; \
|
|
$(MAKE) --no-print-directory -w ; \
|
|
)
|
|
|
|
.PHONY:uavobjects
|
|
uavobjects: uavobjects_gcs uavobjects_flight uavobjects_python uavobjects_matlab uavobjects_java
|
|
|
|
UAVOBJ_XML_DIR := $(ROOT_DIR)/shared/uavobjectdefinition
|
|
UAVOBJ_OUT_DIR := $(BUILD_DIR)/uavobject-synthetics
|
|
|
|
$(UAVOBJ_OUT_DIR):
|
|
$(V1) mkdir -p $@
|
|
|
|
uavobjects_%: $(UAVOBJ_OUT_DIR) uavobjgenerator
|
|
$(V1) ( cd $(UAVOBJ_OUT_DIR) ; \
|
|
$(UAVOBJGENERATOR) -$* $(UAVOBJ_XML_DIR) $(ROOT_DIR) ; \
|
|
)
|
|
|
|
uavobjects_test: $(UAVOBJ_OUT_DIR) uavobjgenerator
|
|
$(V1) $(UAVOBJGENERATOR) -v -none $(UAVOBJ_XML_DIR) $(ROOT_DIR)
|
|
|
|
uavobjects_clean:
|
|
$(V1) [ ! -d "$(UAVOBJ_OUT_DIR)" ] || $(RM) -r "$(UAVOBJ_OUT_DIR)"
|
|
|
|
##############################
|
|
#
|
|
# Flight related components
|
|
#
|
|
##############################
|
|
|
|
FW_TARGETS := openpilot ahrs coptercontrol pipxtreme
|
|
BL_TARGETS := $(addprefix bl_, $(FW_TARGETS))
|
|
|
|
.PHONY: all_fw all_fw_clean
|
|
all_fw: $(addsuffix _bin, $(FW_TARGETS))
|
|
all_fw_clean: $(addsuffix _clean, $(FW_TARGETS))
|
|
|
|
.PHONY: all_bw all_bw_clean
|
|
all_bl: $(addsuffix _elf, $(BL_TARGETS))
|
|
all_bl_clean: $(addsuffix _clean, $(BL_TARGETS))
|
|
|
|
.PHONY: all_flight all_flight_clean
|
|
all_flight: all_fw all_bl
|
|
all_flight_clean: all_fw_clean all_bl_clean
|
|
|
|
.PHONY: openpilot
|
|
openpilot: openpilot_bin
|
|
|
|
openpilot_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/openpilot/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/openpilot" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/OpenPilot $*
|
|
|
|
.PHONY: openpilot_clean
|
|
openpilot_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/openpilot
|
|
|
|
.PHONY: bl_openpilot
|
|
bl_openpilot: bl_openpilot_elf
|
|
|
|
bl_openpilot_%:
|
|
$(V1) mkdir -p $(BUILD_DIR)/bl_openpilot/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/bl_openpilot" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/Bootloaders/OpenPilot $*
|
|
|
|
.PHONY: bl_openpilot_clean
|
|
bl_openpilot_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/bl_openpilot
|
|
|
|
.PHONY: ahrs
|
|
ahrs: ahrs_bin
|
|
|
|
ahrs_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/ahrs/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/ahrs" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/AHRS $*
|
|
|
|
.PHONY: ahrs_clean
|
|
ahrs_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/ahrs
|
|
|
|
.PHONY: bl_ahrs
|
|
bl_ahrs: bl_ahrs_elf
|
|
|
|
bl_ahrs_%:
|
|
$(V1) mkdir -p $(BUILD_DIR)/bl_ahrs/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/bl_ahrs" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/Bootloaders/AHRS $*
|
|
|
|
.PHONY: bl_ahrs_clean
|
|
bl_ahrs_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/bl_ahrs
|
|
|
|
.PHONY: coptercontrol
|
|
coptercontrol: coptercontrol_bin
|
|
|
|
coptercontrol_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/coptercontrol/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/coptercontrol" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/CopterControl $*
|
|
|
|
.PHONY: coptercontrol_clean
|
|
coptercontrol_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/coptercontrol
|
|
|
|
.PHONY: bl_coptercontrol
|
|
bl_coptercontrol: bl_coptercontrol_elf
|
|
|
|
bl_coptercontrol_%:
|
|
$(V1) mkdir -p $(BUILD_DIR)/bl_coptercontrol/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/bl_coptercontrol" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/Bootloaders/CopterControl $*
|
|
|
|
.PHONY: bl_coptercontrol_clean
|
|
bl_coptercontrol_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/bl_coptercontrol
|
|
|
|
.PHONY: pipxtreme
|
|
pipxtreme: pipxtreme_bin
|
|
|
|
pipxtreme_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/pipxtreme/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/pipxtreme" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/PipXtreme $*
|
|
|
|
.PHONY: pipxtreme_clean
|
|
pipxtreme_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/pipxtreme
|
|
|
|
.PHONY: bl_pipxtreme
|
|
bl_pipxtreme: bl_pipxtreme_elf
|
|
|
|
bl_pipxtreme_%:
|
|
$(V1) mkdir -p $(BUILD_DIR)/bl_pipxtreme/dep
|
|
$(V1) $(MAKE) -r --no-print-directory OUTDIR="$(BUILD_DIR)/bl_pipxtreme" TCHAIN_PREFIX="$(ARM_SDK_PREFIX)" REMOVE_CMD="$(RM)" OOCD_EXE="$(OPENOCD)" -C $(ROOT_DIR)/flight/Bootloaders/PipXtreme $*
|
|
|
|
.PHONY: bl_pipxtreme_clean
|
|
bl_pipxtreme_clean:
|
|
$(V0) @echo " CLEAN $@"
|
|
$(V1) $(RM) -fr $(BUILD_DIR)/bl_pipxtreme
|
|
|
|
.PHONY: sim_posix
|
|
sim_posix: sim_posix_elf
|
|
|
|
sim_posix_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/sitl_posix
|
|
$(V1) $(MAKE) --no-print-directory -C $(ROOT_DIR)/flight/OpenPilot --file=$(ROOT_DIR)/flight/OpenPilot/Makefile.posix $*
|
|
|
|
.PHONY: sim_win32
|
|
sim_win32: sim_win32_exe
|
|
|
|
sim_win32_%: uavobjects_flight
|
|
$(V1) mkdir -p $(BUILD_DIR)/flight/sitl_win32
|
|
$(V1) $(MAKE) --no-print-directory -C $(ROOT_DIR)/flight/OpenPilot --file=$(ROOT_DIR)/flight/OpenPilot/Makefile.win32 $*
|