mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-04 12:24:11 +01:00
1044 lines
37 KiB
C
1044 lines
37 KiB
C
/**
|
|
*****************************************************************************
|
|
* @file pios_board.c
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
|
|
* @author PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
|
|
* @addtogroup OpenPilotSystem OpenPilot System
|
|
* @{
|
|
* @addtogroup OpenPilotCore OpenPilot Core
|
|
* @{
|
|
* @brief Defines board specific static initializers for hardware for the revolution board.
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include "inc/openpilot.h"
|
|
#include <pios_board_info.h>
|
|
#include <uavobjectsinit.h>
|
|
#include <hwsettings.h>
|
|
#include <manualcontrolsettings.h>
|
|
#include <taskinfo.h>
|
|
#include <auxmagsettings.h>
|
|
|
|
/*
|
|
* Pull in the board-specific static HW definitions.
|
|
* Including .c files is a bit ugly but this allows all of
|
|
* the HW definitions to be const and static to limit their
|
|
* scope.
|
|
*
|
|
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
|
|
*/
|
|
#include "../board_hw_defs.c"
|
|
|
|
/**
|
|
* Sensor configurations
|
|
*/
|
|
|
|
#if defined(PIOS_INCLUDE_ADC)
|
|
#include "pios_adc_priv.h"
|
|
void PIOS_ADC_DMC_irq_handler(void);
|
|
void DMA2_Stream4_IRQHandler(void) __attribute__((alias("PIOS_ADC_DMC_irq_handler")));
|
|
struct pios_adc_cfg pios_adc_cfg = {
|
|
.adc_dev = ADC1,
|
|
.dma = {
|
|
.irq = {
|
|
.flags = (DMA_FLAG_TCIF4 | DMA_FLAG_TEIF4 | DMA_FLAG_HTIF4),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA2_Stream4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.channel = DMA2_Stream4,
|
|
.init = {
|
|
.DMA_Channel = DMA_Channel_0,
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR
|
|
},
|
|
}
|
|
},
|
|
.half_flag = DMA_IT_HTIF4,
|
|
.full_flag = DMA_IT_TCIF4,
|
|
};
|
|
void PIOS_ADC_DMC_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_ADC_DMA_Handler();
|
|
}
|
|
|
|
#endif /* if defined(PIOS_INCLUDE_ADC) */
|
|
|
|
#if defined(PIOS_INCLUDE_HMC5X83)
|
|
#include "pios_hmc5x83.h"
|
|
|
|
pios_hmc5x83_dev_t onboard_mag = 0;
|
|
pios_hmc5x83_dev_t external_mag = 0;
|
|
|
|
#ifdef PIOS_HMC5X83_HAS_GPIOS
|
|
bool pios_board_internal_mag_handler()
|
|
{
|
|
return PIOS_HMC5x83_IRQHandler(onboard_mag);
|
|
}
|
|
static const struct pios_exti_cfg pios_exti_hmc5x83_cfg __exti_config = {
|
|
.vector = pios_board_internal_mag_handler,
|
|
.line = EXTI_Line5,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_5,
|
|
.GPIO_Speed = GPIO_Speed_100MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN,
|
|
.GPIO_OType = GPIO_OType_OD,
|
|
.GPIO_PuPd = GPIO_PuPd_NOPULL,
|
|
},
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = EXTI9_5_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.exti = {
|
|
.init = {
|
|
.EXTI_Line = EXTI_Line5, // matches above GPIO pin
|
|
.EXTI_Mode = EXTI_Mode_Interrupt,
|
|
.EXTI_Trigger = EXTI_Trigger_Rising,
|
|
.EXTI_LineCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
#endif /* PIOS_HMC5X83_HAS_GPIOS */
|
|
|
|
static const struct pios_hmc5x83_cfg pios_hmc5x83_internal_cfg = {
|
|
#ifdef PIOS_HMC5X83_HAS_GPIOS
|
|
.exti_cfg = &pios_exti_hmc5x83_cfg,
|
|
#endif
|
|
.M_ODR = PIOS_HMC5x83_ODR_75,
|
|
.Meas_Conf = PIOS_HMC5x83_MEASCONF_NORMAL,
|
|
.Gain = PIOS_HMC5x83_GAIN_1_9,
|
|
.Mode = PIOS_HMC5x83_MODE_CONTINUOUS,
|
|
.TempCompensation = false,
|
|
.Driver = &PIOS_HMC5x83_I2C_DRIVER,
|
|
.Orientation = PIOS_HMC5X83_ORIENTATION_EAST_NORTH_UP,
|
|
};
|
|
|
|
static const struct pios_hmc5x83_cfg pios_hmc5x83_external_cfg = {
|
|
#ifdef PIOS_HMC5X83_HAS_GPIOS
|
|
.exti_cfg = NULL,
|
|
#endif
|
|
.M_ODR = PIOS_HMC5x83_ODR_75, // if you change this for auxmag, change AUX_MAG_SKIP in sensors.c
|
|
.Meas_Conf = PIOS_HMC5x83_MEASCONF_NORMAL,
|
|
.Gain = PIOS_HMC5x83_GAIN_1_9,
|
|
.Mode = PIOS_HMC5x83_MODE_CONTINUOUS,
|
|
.TempCompensation = false,
|
|
.Driver = &PIOS_HMC5x83_I2C_DRIVER,
|
|
.Orientation = PIOS_HMC5X83_ORIENTATION_EAST_NORTH_UP,
|
|
};
|
|
#endif /* PIOS_INCLUDE_HMC5X83 */
|
|
|
|
/**
|
|
* Configuration for the MS5611 chip
|
|
*/
|
|
#if defined(PIOS_INCLUDE_MS5611)
|
|
#include "pios_ms5611.h"
|
|
static const struct pios_ms5611_cfg pios_ms5611_cfg = {
|
|
.oversampling = MS5611_OSR_4096,
|
|
};
|
|
#endif /* PIOS_INCLUDE_MS5611 */
|
|
|
|
/**
|
|
* Configuration for the BMA180 chip
|
|
*/
|
|
#if defined(PIOS_INCLUDE_BMA180)
|
|
#include "pios_bma180.h"
|
|
static const struct pios_exti_cfg pios_exti_bma180_cfg __exti_config = {
|
|
.vector = PIOS_BMA180_IRQHandler,
|
|
.line = EXTI_Line4,
|
|
.pin = {
|
|
.gpio = GPIOC,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_4,
|
|
.GPIO_Speed = GPIO_Speed_100MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN,
|
|
.GPIO_OType = GPIO_OType_OD,
|
|
.GPIO_PuPd = GPIO_PuPd_NOPULL,
|
|
},
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = EXTI4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.exti = {
|
|
.init = {
|
|
.EXTI_Line = EXTI_Line4, // matches above GPIO pin
|
|
.EXTI_Mode = EXTI_Mode_Interrupt,
|
|
.EXTI_Trigger = EXTI_Trigger_Rising,
|
|
.EXTI_LineCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
static const struct pios_bma180_cfg pios_bma180_cfg = {
|
|
.exti_cfg = &pios_exti_bma180_cfg,
|
|
.bandwidth = BMA_BW_600HZ,
|
|
.range = BMA_RANGE_8G,
|
|
};
|
|
#endif /* PIOS_INCLUDE_BMA180 */
|
|
|
|
/**
|
|
* Configuration for the MPU6000 chip
|
|
*/
|
|
#if defined(PIOS_INCLUDE_MPU6000)
|
|
#include "pios_mpu6000.h"
|
|
#include "pios_mpu6000_config.h"
|
|
static const struct pios_exti_cfg pios_exti_mpu6000_cfg __exti_config = {
|
|
.vector = PIOS_MPU6000_IRQHandler,
|
|
.line = EXTI_Line8,
|
|
.pin = {
|
|
.gpio = GPIOD,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Speed = GPIO_Speed_100MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN,
|
|
.GPIO_OType = GPIO_OType_OD,
|
|
.GPIO_PuPd = GPIO_PuPd_NOPULL,
|
|
},
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = EXTI9_5_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.exti = {
|
|
.init = {
|
|
.EXTI_Line = EXTI_Line8, // matches above GPIO pin
|
|
.EXTI_Mode = EXTI_Mode_Interrupt,
|
|
.EXTI_Trigger = EXTI_Trigger_Rising,
|
|
.EXTI_LineCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_mpu6000_cfg pios_mpu6000_cfg = {
|
|
.exti_cfg = &pios_exti_mpu6000_cfg,
|
|
.Fifo_store = PIOS_MPU6000_FIFO_TEMP_OUT | PIOS_MPU6000_FIFO_GYRO_X_OUT | PIOS_MPU6000_FIFO_GYRO_Y_OUT | PIOS_MPU6000_FIFO_GYRO_Z_OUT,
|
|
// Clock at 8 khz
|
|
.Smpl_rate_div_no_dlp = 0,
|
|
// with dlp on output rate is 1000Hz
|
|
.Smpl_rate_div_dlp = 0,
|
|
.interrupt_cfg = PIOS_MPU6000_INT_CLR_ANYRD,
|
|
.interrupt_en = PIOS_MPU6000_INTEN_DATA_RDY,
|
|
.User_ctl = PIOS_MPU6000_USERCTL_DIS_I2C,
|
|
.Pwr_mgmt_clk = PIOS_MPU6000_PWRMGMT_PLL_X_CLK,
|
|
.accel_range = PIOS_MPU6000_ACCEL_8G,
|
|
.gyro_range = PIOS_MPU6000_SCALE_2000_DEG,
|
|
.filter = PIOS_MPU6000_LOWPASS_256_HZ,
|
|
.orientation = PIOS_MPU6000_TOP_0DEG,
|
|
.fast_prescaler = PIOS_SPI_PRESCALER_4,
|
|
.std_prescaler = PIOS_SPI_PRESCALER_64,
|
|
.max_downsample = 16,
|
|
};
|
|
#endif /* PIOS_INCLUDE_MPU6000 */
|
|
|
|
/**
|
|
* Configuration for L3GD20 chip
|
|
*/
|
|
#if defined(PIOS_INCLUDE_L3GD20)
|
|
#include "pios_l3gd20.h"
|
|
static const struct pios_exti_cfg pios_exti_l3gd20_cfg __exti_config = {
|
|
.vector = PIOS_L3GD20_IRQHandler,
|
|
.line = EXTI_Line8,
|
|
.pin = {
|
|
.gpio = GPIOD,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Speed = GPIO_Speed_100MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN,
|
|
.GPIO_OType = GPIO_OType_OD,
|
|
.GPIO_PuPd = GPIO_PuPd_NOPULL,
|
|
},
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = EXTI9_5_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.exti = {
|
|
.init = {
|
|
.EXTI_Line = EXTI_Line8, // matches above GPIO pin
|
|
.EXTI_Mode = EXTI_Mode_Interrupt,
|
|
.EXTI_Trigger = EXTI_Trigger_Rising,
|
|
.EXTI_LineCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_l3gd20_cfg pios_l3gd20_cfg = {
|
|
.exti_cfg = &pios_exti_l3gd20_cfg,
|
|
.range = PIOS_L3GD20_SCALE_500_DEG,
|
|
};
|
|
#endif /* PIOS_INCLUDE_L3GD20 */
|
|
|
|
/* One slot per selectable receiver group.
|
|
* eg. PWM, PPM, GCS, SPEKTRUM1, SPEKTRUM2, SBUS
|
|
* NOTE: No slot in this map for NONE.
|
|
*/
|
|
uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE];
|
|
|
|
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 512
|
|
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 512
|
|
|
|
#define PIOS_COM_GPS_RX_BUF_LEN 32
|
|
|
|
#define PIOS_COM_TELEM_USB_RX_BUF_LEN 65
|
|
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 65
|
|
|
|
#define PIOS_COM_BRIDGE_RX_BUF_LEN 65
|
|
#define PIOS_COM_BRIDGE_TX_BUF_LEN 12
|
|
|
|
#define PIOS_COM_AUX_RX_BUF_LEN 512
|
|
#define PIOS_COM_AUX_TX_BUF_LEN 512
|
|
|
|
#define PIOS_COM_HKOSD_RX_BUF_LEN 22
|
|
#define PIOS_COM_HKOSD_TX_BUF_LEN 22
|
|
|
|
#define PIOS_COM_MSP_TX_BUF_LEN 128
|
|
#define PIOS_COM_MSP_RX_BUF_LEN 64
|
|
|
|
#define PIOS_COM_MAVLINK_TX_BUF_LEN 128
|
|
|
|
uint32_t pios_com_aux_id = 0;
|
|
uint32_t pios_com_gps_id = 0;
|
|
uint32_t pios_com_telem_usb_id = 0;
|
|
uint32_t pios_com_telem_rf_id = 0;
|
|
uint32_t pios_com_bridge_id = 0;
|
|
uint32_t pios_com_overo_id = 0;
|
|
uint32_t pios_com_hkosd_id = 0;
|
|
uint32_t pios_com_msp_id = 0;
|
|
uint32_t pios_com_mavlink_id = 0;
|
|
|
|
uintptr_t pios_uavo_settings_fs_id;
|
|
uintptr_t pios_user_fs_id;
|
|
|
|
uint32_t pios_com_vcp_id = 0;
|
|
|
|
/*
|
|
* Setup a com port based on the passed cfg, driver and buffer sizes. tx size = 0 make the port rx only
|
|
*/
|
|
static void PIOS_Board_configure_com(const struct pios_usart_cfg *usart_port_cfg, uint16_t rx_buf_len, uint16_t tx_buf_len,
|
|
const struct pios_com_driver *com_driver, uint32_t *pios_com_id)
|
|
{
|
|
uint32_t pios_usart_id;
|
|
|
|
if (PIOS_USART_Init(&pios_usart_id, usart_port_cfg)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint8_t *rx_buffer = (uint8_t *)pios_malloc(rx_buf_len);
|
|
PIOS_Assert(rx_buffer);
|
|
if (tx_buf_len > 0) { // this is the case for rx/tx ports
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(tx_buf_len);
|
|
PIOS_Assert(tx_buffer);
|
|
|
|
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
|
|
rx_buffer, rx_buf_len,
|
|
tx_buffer, tx_buf_len)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
} else { // rx only port
|
|
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
|
|
rx_buffer, rx_buf_len,
|
|
NULL, 0)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void PIOS_Board_configure_dsm(const struct pios_usart_cfg *pios_usart_dsm_cfg, const struct pios_dsm_cfg *pios_dsm_cfg,
|
|
const struct pios_com_driver *usart_com_driver,
|
|
ManualControlSettingsChannelGroupsOptions channelgroup, uint8_t *bind)
|
|
{
|
|
uint32_t pios_usart_dsm_id;
|
|
|
|
if (PIOS_USART_Init(&pios_usart_dsm_id, pios_usart_dsm_cfg)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint32_t pios_dsm_id;
|
|
if (PIOS_DSM_Init(&pios_dsm_id, pios_dsm_cfg, usart_com_driver,
|
|
pios_usart_dsm_id, *bind)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint32_t pios_dsm_rcvr_id;
|
|
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
pios_rcvr_group_map[channelgroup] = pios_dsm_rcvr_id;
|
|
}
|
|
|
|
/**
|
|
* PIOS_Board_Init()
|
|
* initializes all the core subsystems on this specific hardware
|
|
* called from System/openpilot.c
|
|
*/
|
|
|
|
#include <pios_board_info.h>
|
|
|
|
void PIOS_Board_Init(void)
|
|
{
|
|
const struct pios_board_info *bdinfo = &pios_board_info_blob;
|
|
|
|
/* Delay system */
|
|
PIOS_DELAY_Init();
|
|
|
|
PIOS_LED_Init(&pios_led_cfg);
|
|
|
|
/* Connect flash to the appropriate interface and configure it */
|
|
uintptr_t flash_id;
|
|
|
|
// initialize the internal settings storage flash
|
|
if (PIOS_Flash_Internal_Init(&flash_id, &flash_internal_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_internal_cfg, &pios_internal_flash_driver, flash_id)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
/* Set up the SPI interface to the accelerometer*/
|
|
if (PIOS_SPI_Init(&pios_spi_accel_id, &pios_spi_accel_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
/* Set up the SPI interface to the gyro */
|
|
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
#if !defined(PIOS_FLASH_ON_ACCEL)
|
|
/* Set up the SPI interface to the flash */
|
|
if (PIOS_SPI_Init(&pios_spi_flash_id, &pios_spi_flash_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
/* Connect flash to the appropriate interface and configure it */
|
|
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_flash_id, 0)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
#else
|
|
/* Connect flash to the appropriate interface and configure it */
|
|
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_accel_id, 1)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
#endif
|
|
if (PIOS_FLASHFS_Logfs_Init(&pios_user_fs_id, &flashfs_external_cfg, &pios_jedec_flash_driver, flash_id)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
#if defined(PIOS_INCLUDE_RTC)
|
|
PIOS_RTC_Init(&pios_rtc_main_cfg);
|
|
#endif
|
|
|
|
/* IAP System Setup */
|
|
PIOS_IAP_Init();
|
|
// check for safe mode commands from gcs
|
|
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
|
|
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
|
|
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
|
|
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
|
|
PIOS_IAP_WriteBootCmd(0, 0);
|
|
PIOS_IAP_WriteBootCmd(1, 0);
|
|
PIOS_IAP_WriteBootCmd(2, 0);
|
|
}
|
|
|
|
/* Initialize the task monitor */
|
|
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
/* Initialize the delayed callback library */
|
|
PIOS_CALLBACKSCHEDULER_Initialize();
|
|
|
|
/* Initialize UAVObject libraries */
|
|
EventDispatcherInitialize();
|
|
UAVObjInitialize();
|
|
|
|
HwSettingsInitialize();
|
|
|
|
/* Initialize the alarms library */
|
|
AlarmsInitialize();
|
|
|
|
/* Set up pulse timers */
|
|
PIOS_TIM_InitClock(&tim_1_cfg);
|
|
PIOS_TIM_InitClock(&tim_2_cfg);
|
|
PIOS_TIM_InitClock(&tim_3_cfg);
|
|
PIOS_TIM_InitClock(&tim_4_cfg);
|
|
PIOS_TIM_InitClock(&tim_5_cfg);
|
|
PIOS_TIM_InitClock(&tim_9_cfg);
|
|
PIOS_TIM_InitClock(&tim_10_cfg);
|
|
PIOS_TIM_InitClock(&tim_11_cfg);
|
|
|
|
uint16_t boot_count = PIOS_IAP_ReadBootCount();
|
|
if (boot_count < 3) {
|
|
PIOS_IAP_WriteBootCount(++boot_count);
|
|
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
|
|
} else {
|
|
/* Too many failed boot attempts, force hwsettings to defaults */
|
|
HwSettingsSetDefaults(HwSettingsHandle(), 0);
|
|
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
|
|
}
|
|
|
|
|
|
// PIOS_IAP_Init();
|
|
|
|
#if defined(PIOS_INCLUDE_USB)
|
|
/* Initialize board specific USB data */
|
|
PIOS_USB_BOARD_DATA_Init();
|
|
|
|
/* Flags to determine if various USB interfaces are advertised */
|
|
bool usb_hid_present = false;
|
|
bool usb_cdc_present = false;
|
|
|
|
#if defined(PIOS_INCLUDE_USB_CDC)
|
|
if (PIOS_USB_DESC_HID_CDC_Init()) {
|
|
PIOS_Assert(0);
|
|
}
|
|
usb_hid_present = true;
|
|
usb_cdc_present = true;
|
|
#else
|
|
if (PIOS_USB_DESC_HID_ONLY_Init()) {
|
|
PIOS_Assert(0);
|
|
}
|
|
usb_hid_present = true;
|
|
#endif
|
|
|
|
uint32_t pios_usb_id;
|
|
PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg);
|
|
|
|
#if defined(PIOS_INCLUDE_USB_CDC)
|
|
|
|
uint8_t hwsettings_usb_vcpport;
|
|
/* Configure the USB VCP port */
|
|
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
|
|
|
|
if (!usb_cdc_present) {
|
|
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
|
|
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
|
|
}
|
|
|
|
uint32_t pios_usb_cdc_id;
|
|
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint32_t pios_usb_hid_id;
|
|
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
switch (hwsettings_usb_vcpport) {
|
|
case HWSETTINGS_USB_VCPPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
{
|
|
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
|
|
PIOS_Assert(rx_buffer);
|
|
PIOS_Assert(tx_buffer);
|
|
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
|
|
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
|
|
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
break;
|
|
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
{
|
|
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
|
|
PIOS_Assert(rx_buffer);
|
|
PIOS_Assert(tx_buffer);
|
|
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
|
|
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
|
|
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
break;
|
|
case HWSETTINGS_USB_VCPPORT_DEBUGCONSOLE:
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
|
|
{
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
|
|
PIOS_Assert(tx_buffer);
|
|
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
|
|
NULL, 0,
|
|
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
|
|
break;
|
|
}
|
|
#endif /* PIOS_INCLUDE_USB_CDC */
|
|
|
|
#if defined(PIOS_INCLUDE_USB_HID)
|
|
/* Configure the usb HID port */
|
|
uint8_t hwsettings_usb_hidport;
|
|
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
|
|
|
|
if (!usb_hid_present) {
|
|
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
|
|
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
|
|
}
|
|
|
|
switch (hwsettings_usb_hidport) {
|
|
case HWSETTINGS_USB_HIDPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
{
|
|
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
|
|
PIOS_Assert(rx_buffer);
|
|
PIOS_Assert(tx_buffer);
|
|
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
|
|
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
|
|
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
break;
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_USB_HID */
|
|
|
|
if (usb_hid_present || usb_cdc_present) {
|
|
PIOS_USBHOOK_Activate();
|
|
}
|
|
#endif /* PIOS_INCLUDE_USB */
|
|
|
|
/* Configure IO ports */
|
|
uint8_t hwsettings_DSMxBind;
|
|
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
|
|
|
|
/* Configure Telemetry port */
|
|
uint8_t hwsettings_rv_telemetryport;
|
|
HwSettingsRV_TelemetryPortGet(&hwsettings_rv_telemetryport);
|
|
|
|
switch (hwsettings_rv_telemetryport) {
|
|
case HWSETTINGS_RV_TELEMETRYPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_RV_TELEMETRYPORT_TELEMETRY:
|
|
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
|
|
break;
|
|
case HWSETTINGS_RV_TELEMETRYPORT_COMAUX:
|
|
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
|
|
break;
|
|
case HWSETTINGS_RV_TELEMETRYPORT_COMBRIDGE:
|
|
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
|
|
break;
|
|
case HWSETTINGS_RV_TELEMETRYPORT_MSP:
|
|
PIOS_Board_configure_com(&pios_usart_telem_cfg, PIOS_COM_MSP_RX_BUF_LEN, PIOS_COM_MSP_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_msp_id);
|
|
break;
|
|
case HWSETTINGS_RV_TELEMETRYPORT_MAVLINK:
|
|
PIOS_Board_configure_com(&pios_usart_telem_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
|
|
break;
|
|
} /* hwsettings_rv_telemetryport */
|
|
|
|
/* Configure GPS port */
|
|
uint8_t hwsettings_rv_gpsport;
|
|
HwSettingsRV_GPSPortGet(&hwsettings_rv_gpsport);
|
|
switch (hwsettings_rv_gpsport) {
|
|
case HWSETTINGS_RV_GPSPORT_DISABLED:
|
|
break;
|
|
|
|
case HWSETTINGS_RV_GPSPORT_TELEMETRY:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
|
|
break;
|
|
|
|
case HWSETTINGS_RV_GPSPORT_GPS:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_GPS_RX_BUF_LEN, 0, &pios_usart_com_driver, &pios_com_gps_id);
|
|
break;
|
|
|
|
case HWSETTINGS_RV_GPSPORT_COMAUX:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
|
|
break;
|
|
|
|
case HWSETTINGS_RV_GPSPORT_COMBRIDGE:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
|
|
break;
|
|
case HWSETTINGS_RV_GPSPORT_MSP:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, PIOS_COM_MSP_RX_BUF_LEN, PIOS_COM_MSP_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_msp_id);
|
|
break;
|
|
case HWSETTINGS_RV_GPSPORT_MAVLINK:
|
|
PIOS_Board_configure_com(&pios_usart_gps_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
|
|
break;
|
|
} /* hwsettings_rv_gpsport */
|
|
|
|
/* Configure AUXPort */
|
|
uint8_t hwsettings_rv_auxport;
|
|
HwSettingsRV_AuxPortGet(&hwsettings_rv_auxport);
|
|
|
|
switch (hwsettings_rv_auxport) {
|
|
case HWSETTINGS_RV_AUXPORT_DISABLED:
|
|
break;
|
|
|
|
case HWSETTINGS_RV_AUXPORT_TELEMETRY:
|
|
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
|
|
break;
|
|
|
|
case HWSETTINGS_RV_AUXPORT_DSM:
|
|
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
|
|
PIOS_Board_configure_dsm(&pios_usart_dsm_aux_cfg, &pios_dsm_aux_cfg,
|
|
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
|
|
break;
|
|
case HWSETTINGS_RV_AUXPORT_COMAUX:
|
|
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXPORT_COMBRIDGE:
|
|
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXPORT_MSP:
|
|
PIOS_Board_configure_com(&pios_usart_aux_cfg, PIOS_COM_MSP_RX_BUF_LEN, PIOS_COM_MSP_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_msp_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXPORT_MAVLINK:
|
|
PIOS_Board_configure_com(&pios_usart_aux_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXPORT_OSDHK:
|
|
PIOS_Board_configure_com(&pios_usart_hkosd_aux_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
|
|
break;
|
|
} /* hwsettings_rv_auxport */
|
|
/* Configure AUXSbusPort */
|
|
// TODO: ensure that the serial invertion pin is setted correctly
|
|
uint8_t hwsettings_rv_auxsbusport;
|
|
HwSettingsRV_AuxSBusPortGet(&hwsettings_rv_auxsbusport);
|
|
|
|
switch (hwsettings_rv_auxsbusport) {
|
|
case HWSETTINGS_RV_AUXSBUSPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_SBUS:
|
|
#ifdef PIOS_INCLUDE_SBUS
|
|
{
|
|
uint32_t pios_usart_sbus_id;
|
|
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_auxsbus_cfg)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint32_t pios_sbus_id;
|
|
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
uint32_t pios_sbus_rcvr_id;
|
|
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
|
|
}
|
|
#endif /* PIOS_INCLUDE_SBUS */
|
|
break;
|
|
|
|
case HWSETTINGS_RV_AUXSBUSPORT_DSM:
|
|
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
|
|
PIOS_Board_configure_dsm(&pios_usart_dsm_auxsbus_cfg, &pios_dsm_auxsbus_cfg,
|
|
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_COMAUX:
|
|
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_COMBRIDGE:
|
|
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_MSP:
|
|
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, PIOS_COM_MSP_RX_BUF_LEN, PIOS_COM_MSP_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_msp_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_MAVLINK:
|
|
PIOS_Board_configure_com(&pios_usart_auxsbus_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
|
|
break;
|
|
case HWSETTINGS_RV_AUXSBUSPORT_OSDHK:
|
|
PIOS_Board_configure_com(&pios_usart_hkosd_auxsbus_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
|
|
break;
|
|
} /* hwsettings_rv_auxport */
|
|
|
|
/* Configure FlexiPort */
|
|
|
|
uint8_t hwsettings_rv_flexiport;
|
|
HwSettingsRV_FlexiPortGet(&hwsettings_rv_flexiport);
|
|
|
|
switch (hwsettings_rv_flexiport) {
|
|
case HWSETTINGS_RV_FLEXIPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_I2C:
|
|
#if defined(PIOS_INCLUDE_I2C)
|
|
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
PIOS_DELAY_WaitmS(50); // this was after the other PIOS_I2C_Init(), so I copied it here too
|
|
#ifdef PIOS_INCLUDE_WDG
|
|
// give HMC5x83 on I2C some extra time to allow for reset, etc. if needed
|
|
// this is not in a loop, so it is safe
|
|
// leave this here even if PIOS_INCLUDE_HMC5X83 is undefined
|
|
// to avoid making something else fail when HMC5X83 is removed
|
|
PIOS_WDG_Clear();
|
|
#endif /* PIOS_INCLUDE_WDG */
|
|
#if defined(PIOS_INCLUDE_HMC5X83)
|
|
// get auxmag type
|
|
AuxMagSettingsTypeOptions option;
|
|
AuxMagSettingsInitialize();
|
|
AuxMagSettingsTypeGet(&option);
|
|
// if the aux mag type is FlexiPort then set it up
|
|
if (option == AUXMAGSETTINGS_TYPE_FLEXI) {
|
|
// attach the 5x83 mag to the previously inited I2C2
|
|
external_mag = PIOS_HMC5x83_Init(&pios_hmc5x83_external_cfg, pios_i2c_flexiport_adapter_id, 0);
|
|
#ifdef PIOS_INCLUDE_WDG
|
|
// give HMC5x83 on I2C some extra time to allow for reset, etc. if needed
|
|
// this is not in a loop, so it is safe
|
|
PIOS_WDG_Clear();
|
|
#endif /* PIOS_INCLUDE_WDG */
|
|
// add this sensor to the sensor task's list
|
|
PIOS_HMC5x83_Register(external_mag, PIOS_SENSORS_TYPE_3AXIS_AUXMAG);
|
|
// mag alarm is cleared later, so use I2C
|
|
AlarmsSet(SYSTEMALARMS_ALARM_I2C, (external_mag) ? SYSTEMALARMS_ALARM_OK : SYSTEMALARMS_ALARM_WARNING);
|
|
}
|
|
#endif /* PIOS_INCLUDE_HMC5X83 */
|
|
#endif /* PIOS_INCLUDE_I2C */
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_DSM:
|
|
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
|
|
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
|
|
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_COMAUX:
|
|
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_COMBRIDGE:
|
|
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_MSP:
|
|
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_MSP_RX_BUF_LEN, PIOS_COM_MSP_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_msp_id);
|
|
break;
|
|
case HWSETTINGS_RV_FLEXIPORT_MAVLINK:
|
|
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
|
|
break;
|
|
} /* hwsettings_rv_flexiport */
|
|
|
|
|
|
/* Configure the receiver port*/
|
|
uint8_t hwsettings_rcvrport;
|
|
HwSettingsRV_RcvrPortGet(&hwsettings_rcvrport);
|
|
//
|
|
switch (hwsettings_rcvrport) {
|
|
case HWSETTINGS_RV_RCVRPORT_DISABLED:
|
|
break;
|
|
case HWSETTINGS_RV_RCVRPORT_PWM:
|
|
#if defined(PIOS_INCLUDE_PWM)
|
|
{
|
|
/* Set up the receiver port. Later this should be optional */
|
|
uint32_t pios_pwm_id;
|
|
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg);
|
|
|
|
uint32_t pios_pwm_rcvr_id;
|
|
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
|
|
}
|
|
#endif /* PIOS_INCLUDE_PWM */
|
|
break;
|
|
case HWSETTINGS_RV_RCVRPORT_PPM:
|
|
case HWSETTINGS_RV_RCVRPORT_PPMOUTPUTS:
|
|
#if defined(PIOS_INCLUDE_PPM)
|
|
{
|
|
uint32_t pios_ppm_id;
|
|
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
|
|
|
|
uint32_t pios_ppm_rcvr_id;
|
|
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
|
|
}
|
|
#endif /* PIOS_INCLUDE_PPM */
|
|
case HWSETTINGS_RV_RCVRPORT_OUTPUTS:
|
|
|
|
break;
|
|
}
|
|
|
|
#if defined(PIOS_OVERO_SPI)
|
|
/* Set up the SPI based PIOS_COM interface to the overo */
|
|
{
|
|
HwSettingsData hwSettings;
|
|
HwSettingsGet(&hwSettings);
|
|
if (hwSettings.OptionalModules.Overo == HWSETTINGS_OPTIONALMODULES_ENABLED) {
|
|
if (PIOS_OVERO_Init(&pios_overo_id, &pios_overo_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
const uint32_t PACKET_SIZE = 1024;
|
|
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PACKET_SIZE);
|
|
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PACKET_SIZE);
|
|
PIOS_Assert(rx_buffer);
|
|
PIOS_Assert(tx_buffer);
|
|
if (PIOS_COM_Init(&pios_com_overo_id, &pios_overo_com_driver, pios_overo_id,
|
|
rx_buffer, PACKET_SIZE,
|
|
tx_buffer, PACKET_SIZE)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif /* if defined(PIOS_OVERO_SPI) */
|
|
|
|
#if defined(PIOS_INCLUDE_HCSR04)
|
|
{
|
|
PIOS_TIM_InitClock(&tim_8_cfg);
|
|
uint32_t pios_hcsr04_id;
|
|
PIOS_HCSR04_Init(&pios_hcsr04_id, &pios_hcsr04_cfg);
|
|
}
|
|
#endif
|
|
|
|
|
|
#if defined(PIOS_INCLUDE_GCSRCVR)
|
|
GCSReceiverInitialize();
|
|
uint32_t pios_gcsrcvr_id;
|
|
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
|
|
uint32_t pios_gcsrcvr_rcvr_id;
|
|
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
|
|
#endif /* PIOS_INCLUDE_GCSRCVR */
|
|
|
|
#ifndef PIOS_ENABLE_DEBUG_PINS
|
|
switch (hwsettings_rcvrport) {
|
|
case HWSETTINGS_RV_RCVRPORT_DISABLED:
|
|
case HWSETTINGS_RV_RCVRPORT_PWM:
|
|
case HWSETTINGS_RV_RCVRPORT_PPM:
|
|
/* Set up the servo outputs */
|
|
PIOS_Servo_Init(&pios_servo_cfg);
|
|
break;
|
|
case HWSETTINGS_RV_RCVRPORT_PPMOUTPUTS:
|
|
case HWSETTINGS_RV_RCVRPORT_OUTPUTS:
|
|
// PIOS_Servo_Init(&pios_servo_rcvr_cfg);
|
|
// TODO: Prepare the configurations on board_hw_defs and handle here:
|
|
PIOS_Servo_Init(&pios_servo_cfg);
|
|
break;
|
|
}
|
|
#else
|
|
PIOS_DEBUG_Init(pios_tim_servoport_all_pins, NELEMENTS(pios_tim_servoport_all_pins));
|
|
#endif
|
|
|
|
// init I2C1 for use with the internal mag
|
|
if (PIOS_I2C_Init(&pios_i2c_mag_adapter_id, &pios_i2c_mag_adapter_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
// init I2C1 for use with the internal baro
|
|
if (PIOS_I2C_Init(&pios_i2c_pressure_adapter_id, &pios_i2c_pressure_adapter_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
PIOS_DELAY_WaitmS(50);
|
|
|
|
#if defined(PIOS_INCLUDE_ADC)
|
|
PIOS_ADC_Init(&pios_adc_cfg);
|
|
#endif
|
|
|
|
#ifdef PIOS_INCLUDE_WDG
|
|
// give HMC5x83 on I2C some extra time to allow for reset, etc. if needed
|
|
// this is not in a loop, so it is safe
|
|
// leave this here even if PIOS_INCLUDE_HMC5X83 is undefined
|
|
// to avoid making something else fail when HMC5X83 is removed
|
|
PIOS_WDG_Clear();
|
|
#endif /* PIOS_INCLUDE_WDG */
|
|
|
|
#if defined(PIOS_INCLUDE_HMC5X83)
|
|
// attach the 5x83 mag to the previously inited I2C1
|
|
onboard_mag = PIOS_HMC5x83_Init(&pios_hmc5x83_internal_cfg, pios_i2c_mag_adapter_id, 0);
|
|
#ifdef PIOS_INCLUDE_WDG
|
|
// give HMC5x83 on I2C some extra time to allow for reset, etc. if needed
|
|
// this is not in a loop, so it is safe
|
|
PIOS_WDG_Clear();
|
|
#endif /* PIOS_INCLUDE_WDG */
|
|
// add this sensor to the sensor task's list
|
|
PIOS_HMC5x83_Register(onboard_mag, PIOS_SENSORS_TYPE_3AXIS_MAG);
|
|
#endif
|
|
|
|
#if defined(PIOS_INCLUDE_MS5611)
|
|
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_pressure_adapter_id);
|
|
PIOS_MS5611_Register();
|
|
#endif
|
|
|
|
switch (bdinfo->board_rev) {
|
|
case 0x01:
|
|
#if defined(PIOS_INCLUDE_L3GD20)
|
|
PIOS_Assert(0); // L3gd20 has not been ported to Sensor framework!!!
|
|
PIOS_L3GD20_Init(pios_spi_gyro_id, 0, &pios_l3gd20_cfg);
|
|
PIOS_Assert(PIOS_L3GD20_Test() == 0);
|
|
#endif
|
|
#if defined(PIOS_INCLUDE_BMA180)
|
|
PIOS_Assert(0); // BMA180 has not been ported to Sensor framework!!!
|
|
PIOS_BMA180_Init(pios_spi_accel_id, 0, &pios_bma180_cfg);
|
|
PIOS_Assert(PIOS_BMA180_Test() == 0);
|
|
#endif
|
|
break;
|
|
case 0x02:
|
|
#if defined(PIOS_INCLUDE_MPU6000)
|
|
PIOS_MPU6000_Init(pios_spi_gyro_id, 0, &pios_mpu6000_cfg);
|
|
PIOS_MPU6000_CONFIG_Configure();
|
|
PIOS_MPU6000_Register();
|
|
#endif
|
|
break;
|
|
default:
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
#ifdef PIOS_INCLUDE_ADC
|
|
{
|
|
uint8_t adc_config[HWSETTINGS_ADCROUTING_NUMELEM];
|
|
HwSettingsADCRoutingArrayGet(adc_config);
|
|
for (uint32_t i = 0; i < HWSETTINGS_ADCROUTING_NUMELEM; i++) {
|
|
if (adc_config[i] != HWSETTINGS_ADCROUTING_DISABLED) {
|
|
PIOS_ADC_PinSetup(i);
|
|
}
|
|
}
|
|
}
|
|
#endif // PIOS_INCLUDE_ADC
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|