mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-01 09:24:10 +01:00
7598e898fa
- use IRQStack for ISRs (at begening of SRAM) (let's call it the irq stack) - use end of heap for stack needed during initialization (let's call it the init stack). - the systemStats in GCS indicate the remaining bytes in the IRQ stack (this is realy usefull to monitor our (nested) IRQs. This is the base ground to provide as much memory as possible available at task creation time. Next step is to re-organize the initialization in order to move all the init out of the thread's stacks onto the init stack. This will provide as much memory as possible available at task creation time. Basically the stack during initialization will be destroyed once the scheduler starts and dynamic alloc are made (since the init stack is at the end of the heap). We will need to make sure we don't clobber the heap during initialization otherwise this will lead to stack corruption.
83 lines
2.7 KiB
C
83 lines
2.7 KiB
C
|
|
#ifndef FREERTOS_CONFIG_H
|
|
#define FREERTOS_CONFIG_H
|
|
|
|
/*-----------------------------------------------------------
|
|
* Application specific definitions.
|
|
*
|
|
* These definitions should be adjusted for your particular hardware and
|
|
* application requirements.
|
|
*
|
|
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
|
|
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
|
|
*
|
|
* See http://www.freertos.org/a00110.html.
|
|
*----------------------------------------------------------*/
|
|
|
|
/**
|
|
* @addtogroup PIOS PIOS
|
|
* @{
|
|
* @addtogroup FreeRTOS FreeRTOS
|
|
* @{
|
|
*/
|
|
|
|
/* Notes: We use 5 task priorities */
|
|
|
|
#define configUSE_PREEMPTION 1
|
|
#define configUSE_IDLE_HOOK 1
|
|
#define configUSE_TICK_HOOK 0
|
|
#define configCPU_CLOCK_HZ ( ( unsigned long ) 72000000 )
|
|
#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
|
|
#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
|
|
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 128 )
|
|
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 14 * 1024 ) )
|
|
#define configMAX_TASK_NAME_LEN ( 16 )
|
|
#define configUSE_TRACE_FACILITY 0
|
|
#define configUSE_16_BIT_TICKS 0
|
|
#define configIDLE_SHOULD_YIELD 0
|
|
#define configUSE_MUTEXES 1
|
|
#define configUSE_RECURSIVE_MUTEXES 1
|
|
#define configUSE_COUNTING_SEMAPHORES 0
|
|
#define configUSE_ALTERNATIVE_API 0
|
|
#define configCHECK_FOR_STACK_OVERFLOW 2
|
|
#define configQUEUE_REGISTRY_SIZE 10
|
|
|
|
/* Co-routine definitions. */
|
|
#define configUSE_CO_ROUTINES 0
|
|
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
|
|
|
|
/* Set the following definitions to 1 to include the API function, or zero
|
|
to exclude the API function. */
|
|
|
|
#define INCLUDE_vTaskPrioritySet 1
|
|
#define INCLUDE_uxTaskPriorityGet 1
|
|
#define INCLUDE_vTaskDelete 1
|
|
#define INCLUDE_vTaskCleanUpResources 0
|
|
#define INCLUDE_vTaskSuspend 1
|
|
#define INCLUDE_vTaskDelayUntil 1
|
|
#define INCLUDE_vTaskDelay 1
|
|
#define INCLUDE_xTaskGetSchedulerState 1
|
|
#define INCLUDE_xTaskGetCurrentTaskHandle 1
|
|
#define INCLUDE_uxTaskGetStackHighWaterMark 1
|
|
|
|
/* This is the raw value as per the Cortex-M3 NVIC. Values can be 255
|
|
(lowest) to 1 (highest maskable) to 0 (highest non-maskable). */
|
|
#define configKERNEL_INTERRUPT_PRIORITY 15 << 4 /* equivalent to NVIC priority 15 */
|
|
#define configMAX_SYSCALL_INTERRUPT_PRIORITY 3 << 4 /* equivalent to NVIC priority 3 */
|
|
|
|
/* This is the value being used as per the ST library which permits 16
|
|
priority values, 0 to 15. This must correspond to the
|
|
configKERNEL_INTERRUPT_PRIORITY setting. Here 15 corresponds to the lowest
|
|
NVIC value of 255. */
|
|
#define configLIBRARY_KERNEL_INTERRUPT_PRIORITY 15
|
|
|
|
#if !defined(ARCH_POSIX) && !defined(ARCH_WIN32)
|
|
#define CHECK_IRQ_STACK
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* FREERTOS_CONFIG_H */
|