rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Code Issues Releases Activity
742058da8c
LibrePilot/flight/targets/boards/osd/board_hw_defs.c

848 lines
22 KiB
C
Raw Blame History

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file board_hw_defs.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(PIOS_INCLUDE_LED)
#include <pios_led_priv.h>
static const struct pios_led pios_leds[] = {
[PIOS_LED_HEARTBEAT] = {
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
},
[PIOS_LED_ALARM] = {
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
},
};
static const struct pios_led_cfg pios_led_cfg = {
.leds = pios_leds,
.num_leds = NELEMENTS(pios_leds),
};
const struct pios_led_cfg * PIOS_BOARD_HW_DEFS_GetLedCfg (uint32_t board_revision)
{
return &pios_led_cfg;
}
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* MicroSD Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_sdcard_irq_handler(void);
void DMA1_Channel2_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
void DMA1_Channel3_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
static const struct pios_spi_cfg pios_spi_sdcard_cfg = {
.regs = SPI2,
.remap = GPIO_AF_SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16, /* Maximum divider (ie. slowest clock rate) */
},
.use_crc = false,
.dma = {
.irq = {
.flags = (DMA_IT_TCIF3|DMA_IT_TEIF3|DMA_IT_HTIF3|DMA_IT_TCIF3),
.init = {
.NVIC_IRQChannel = DMA1_Stream3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Stream3,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralToMemory,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
.tx = {
.channel = DMA1_Stream4,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.slave_count = 1,
.ssel = {{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
}},
};
static uint32_t pios_spi_sdcard_id;
void PIOS_SPI_sdcard_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_sdcard_id);
}
#endif
#include <pios_usart_priv.h>
#if defined(PIOS_INCLUDE_GPS)
/*
* GPS USART
*/
static const struct pios_usart_cfg pios_usart_gps_cfg = {
.regs = USART1,
.remap = GPIO_AF_USART1,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_INCLUDE_GPS */
#ifdef PIOS_INCLUDE_COM_AUX
/*
* AUX USART
*/
static const struct pios_usart_cfg pios_usart_aux_cfg = {
.regs = USART2,
.remap = GPIO_AF_USART2,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_COM_AUX */
#ifdef PIOS_INCLUDE_COM_TELEM
/*
* Telemetry on main USART
*/
static const struct pios_usart_cfg pios_usart_telem_main_cfg = {
.regs = UART4,
.remap = GPIO_AF_UART4,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = UART4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_COM_TELEM */
#if defined(PIOS_INCLUDE_COM)
#include <pios_com_priv.h>
#endif /* PIOS_INCLUDE_COM */
#if defined(PIOS_INCLUDE_I2C)
#include <pios_i2c_priv.h>
/*
* I2C Adapters
*/
void PIOS_I2C_flexiport_adapter_ev_irq_handler(void);
void PIOS_I2C_flexiport_adapter_er_irq_handler(void);
void I2C2_EV_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexiport_adapter_ev_irq_handler")));
void I2C2_ER_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexiport_adapter_er_irq_handler")));
static const struct pios_i2c_adapter_cfg pios_i2c_flexiport_adapter_cfg = {
.regs = I2C2,
.remap = GPIO_AF_I2C2,
.init = {
.I2C_Mode = I2C_Mode_I2C,
.I2C_OwnAddress1 = 0,
.I2C_Ack = I2C_Ack_Enable,
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
.I2C_DutyCycle = I2C_DutyCycle_2,
.I2C_ClockSpeed = 400000, /* bits/s */
},
.transfer_timeout_ms = 50,
.scl = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.sda = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.event = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_EV_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.error = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_ER_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
uint32_t pios_i2c_flexiport_adapter_id;
void PIOS_I2C_flexiport_adapter_ev_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_EV_IRQ_Handler(pios_i2c_flexiport_adapter_id);
}
void PIOS_I2C_flexiport_adapter_er_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_ER_IRQ_Handler(pios_i2c_flexiport_adapter_id);
}
#endif
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler (void);
void RTC_WKUP_IRQHandler() __attribute__ ((alias ("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div8, // Divide 8 Mhz crystal down to 1
// For some reason it's acting like crystal is 16 Mhz. This clock is then divided
// by another 16 to give a nominal 62.5 khz clock
.prescaler = 100, // Every 100 cycles gives 625 Hz
.irq = {
.init = {
.NVIC_IRQChannel = RTC_WKUP_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler (void)
{
PIOS_RTC_irq_handler ();
}
#endif
#if defined(PIOS_INCLUDE_USB)
#include "pios_usb_priv.h"
static const struct pios_usb_cfg pios_usb_main_cfg = {
.irq = {
.init = {
.NVIC_IRQChannel = OTG_FS_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.vsense = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_25MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
},
}
};
#include "pios_usb_board_data_priv.h"
#include "pios_usb_desc_hid_cdc_priv.h"
#include "pios_usb_desc_hid_only_priv.h"
#include "pios_usbhook.h"
#endif /* PIOS_INCLUDE_USB */
#if defined(PIOS_INCLUDE_COM_MSG)
#include <pios_com_msg_priv.h>
#endif /* PIOS_INCLUDE_COM_MSG */
#if defined(PIOS_INCLUDE_USB_HID)
#include <pios_usb_hid_priv.h>
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
.data_if = 0,
.data_rx_ep = 1,
.data_tx_ep = 1,
};
#endif /* PIOS_INCLUDE_USB_HID */
#if defined(PIOS_INCLUDE_USB_CDC)
#include <pios_usb_cdc_priv.h>
const struct pios_usb_cdc_cfg pios_usb_cdc_cfg = {
.ctrl_if = 1,
.ctrl_tx_ep = 2,
.data_if = 2,
.data_rx_ep = 3,
.data_tx_ep = 3,
};
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_VIDEO)
#include <pios_video.h>
static const struct pios_exti_cfg pios_exti_hsync_cfg __exti_config = {
.vector = PIOS_Hsync_ISR,
.line = EXTI_Line2,
.pin = {
.gpio = GPIOD,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI2_IRQn,
.NVIC_IRQChannelPreemptionPriority = 0,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line2, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising_Falling,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_exti_cfg pios_exti_vsync_cfg __exti_config = {
.vector = PIOS_Vsync_ISR,
.line = EXTI_Line11,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI15_10_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line11, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Falling,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_video_cfg pios_video_cfg = {
.mask = {
.regs = SPI3,
.remap = GPIO_AF_SPI3,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_1Line_Tx,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_Low,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4,
},
.use_crc = false,
.dma = {
.irq = {
// Note this is the stream ID that triggers interrupts (in this case RX)
.flags = (DMA_IT_TCIF7),
.init = {
.NVIC_IRQChannel = DMA1_Stream7_IRQn,
.NVIC_IRQChannelPreemptionPriority = 0,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {},
.tx = {
.channel = DMA1_Stream7,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t) & (SPI3->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFER_LINE_LENGTH,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_VeryHigh,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL
},
},
.miso = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL
},
},
.mosi = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL
},
},
.slave_count = 1,
},
.level = {
.regs = SPI1,
.remap = GPIO_AF_SPI1,
.init = {
.SPI_Mode = SPI_Mode_Slave,
.SPI_Direction = SPI_Direction_1Line_Tx,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_Low,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2,
},
.use_crc = false,
.dma = {
.irq = {
.flags = (DMA_IT_TCIF5),
.init = {
.NVIC_IRQChannel = DMA2_Stream5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {},
.tx = {
.channel = DMA2_Stream5,
.init = {
.DMA_Channel = DMA_Channel_3,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFER_LINE_LENGTH,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_VeryHigh,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.slave_count = 1,
},
/////////////////
.hsync = &pios_exti_hsync_cfg,
.vsync = &pios_exti_vsync_cfg,
};
#endif
#if defined(PIOS_INCLUDE_WAVE)
#include <pios_wavplay.h>
#include <pios_tim_priv.h>
static const TIM_TimeBaseInitTypeDef tim_6_time_base = {
.TIM_Prescaler = 0,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = (PIOS_PERIPHERAL_APB1_CLOCK / 44100),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_6_cfg = {
.timer = TIM6,
.time_base_init = &tim_6_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM6_DAC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_dac_cfg pios_dac_cfg = {
.timer = TIM6,
.time_base_init = {
.TIM_Prescaler = 0,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = (PIOS_PERIPHERAL_APB1_CLOCK / 44100),
.TIM_RepetitionCounter = 0x0000,
},
.irq = {
.init = {
.NVIC_IRQChannel = TIM6_DAC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.dma = {
.irq = {
// Note this is the stream ID that triggers interrupts (in this case RX)
.flags = (DMA_IT_TCIF5),
.init = {
.NVIC_IRQChannel = DMA1_Stream5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {},
.tx = {
.channel = DMA1_Stream5,
.init = {
.DMA_Channel = DMA_Channel_7,
.DMA_PeripheralBaseAddr = (uint32_t)&DAC->DHR8R1,
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFERSIZE,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_High,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.channel = DAC_Channel_1,
.dac_init = {
.DAC_Trigger = DAC_Trigger_T6_TRGO,
.DAC_WaveGeneration = DAC_WaveGeneration_None,
.DAC_OutputBuffer = DAC_OutputBuffer_Enable,
},
.dac_io = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AN,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
};
#endif
Reference in New Issue View Git Blame Copy Permalink