mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-02 10:24:11 +01:00
477 lines
17 KiB
C
477 lines
17 KiB
C
/**
|
|
******************************************************************************
|
|
*
|
|
* @file pios_board.h
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
|
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
|
|
* @see The GNU Public License (GPL) Version 3
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef PIOS_BOARD_H
|
|
#define PIOS_BOARD_H
|
|
|
|
// *****************************************************************
|
|
// Timers and Channels Used
|
|
|
|
/*
|
|
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
|
|
------+------------+------------+------------+------------
|
|
TIM1 | DELAY |
|
|
TIM2 | | PPM Output | PPM Input |
|
|
TIM3 | TIMER INTERRUPT |
|
|
TIM4 | STOPWATCH |
|
|
------+------------+------------+------------+------------
|
|
*/
|
|
|
|
//------------------------
|
|
// DMA Channels Used
|
|
//------------------------
|
|
/* Channel 1 - */
|
|
/* Channel 2 - */
|
|
/* Channel 3 - */
|
|
/* Channel 4 - */
|
|
/* Channel 5 - */
|
|
/* Channel 6 - */
|
|
/* Channel 7 - */
|
|
/* Channel 8 - */
|
|
/* Channel 9 - */
|
|
/* Channel 10 - */
|
|
/* Channel 11 - */
|
|
/* Channel 12 - */
|
|
|
|
//-------------------------
|
|
// System Settings
|
|
//
|
|
// See also System_stm32f4xx.c
|
|
//-------------------------
|
|
//These macros are deprecated
|
|
//please use PIOS_PERIPHERAL_APBx_CLOCK According to the table below
|
|
//#define PIOS_MASTER_CLOCK
|
|
//#define PIOS_PERIPHERAL_CLOCK
|
|
//#define PIOS_PERIPHERAL_CLOCK
|
|
|
|
#define PIOS_SYSCLK 108000000
|
|
// Peripherals that belongs to APB1 are:
|
|
// DAC |PWR |CAN1,2
|
|
// I2C1,2,3 |UART4,5 |USART3,2
|
|
// I2S3Ext |SPI3/I2S3 |SPI2/I2S2
|
|
// I2S2Ext |IWDG |WWDG
|
|
// RTC/BKP reg
|
|
// TIM2,3,4,5,6,7,12,13,14
|
|
|
|
// Calculated as SYSCLK / APBPresc * (APBPre == 1 ? 1 : 2)
|
|
// Default APB1 Prescaler = 4
|
|
#define PIOS_PERIPHERAL_APB1_CLOCK (PIOS_SYSCLK / 2)
|
|
|
|
// Peripherals belonging to APB2
|
|
// SDIO |EXTI |SYSCFG |SPI1
|
|
// ADC1,2,3
|
|
// USART1,6
|
|
// TIM1,8,9,10,11
|
|
//
|
|
// Default APB2 Prescaler = 2
|
|
//
|
|
#define PIOS_PERIPHERAL_APB2_CLOCK PIOS_SYSCLK
|
|
|
|
|
|
//------------------------
|
|
// BOOTLOADER_SETTINGS
|
|
//------------------------
|
|
#define BOARD_READABLE TRUE
|
|
#define BOARD_WRITABLE TRUE
|
|
#define MAX_DEL_RETRYS 3
|
|
|
|
//------------------------
|
|
// TELEMETRY
|
|
//------------------------
|
|
#define TELEM_QUEUE_SIZE 20
|
|
#define PIOS_TELEM_STACK_SIZE 624
|
|
|
|
// *****************************************************************
|
|
// System Settings
|
|
|
|
#define PIOS_MASTER_CLOCK 108000000ul
|
|
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
|
|
|
|
// *****************************************************************
|
|
// Interrupt Priorities
|
|
|
|
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
|
|
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
|
|
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
|
|
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
|
|
|
|
|
|
//------------------------
|
|
// WATCHDOG_SETTINGS
|
|
//------------------------
|
|
#define PIOS_WATCHDOG_TIMEOUT 250
|
|
#define PIOS_WDG_REGISTER RTC_BKP_DR4
|
|
#define PIOS_WDG_ACTUATOR 0x0001
|
|
#define PIOS_WDG_STABILIZATION 0x0002
|
|
#define PIOS_WDG_ATTITUDE 0x0004
|
|
#define PIOS_WDG_MANUAL 0x0008
|
|
|
|
|
|
// *****************************************************************
|
|
// PIOS_LED
|
|
#define PIOS_LED_HEARTBEAT 0
|
|
#define PIOS_LED_ALARM 1
|
|
|
|
#if 0
|
|
#define PIOS_LED_LED1_GPIO_PORT GPIOD
|
|
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_13 //LD3
|
|
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOD
|
|
#define PIOS_LED_LED2_GPIO_PORT GPIOD
|
|
#define PIOS_LED_LED2_GPIO_PIN GPIO_Pin_12 //LD4
|
|
#define PIOS_LED_LED2_GPIO_CLK RCC_APB2Periph_GPIOD
|
|
#define PIOS_LED_LED3_GPIO_PORT GPIOD
|
|
#define PIOS_LED_LED3_GPIO_PIN GPIO_Pin_14 //LD5
|
|
#define PIOS_LED_LED3_GPIO_CLK RCC_APB2Periph_GPIOD
|
|
#define PIOS_LED_LED4_GPIO_PORT GPIOD
|
|
#define PIOS_LED_LED4_GPIO_PIN GPIO_Pin_15 //LD6
|
|
#define PIOS_LED_LED4_GPIO_CLK RCC_APB2Periph_GPIOD
|
|
#define PIOS_LED_NUM 4
|
|
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT, PIOS_LED_LED2_GPIO_PORT, PIOS_LED_LED3_GPIO_PORT, PIOS_LED_LED4_GPIO_PORT }
|
|
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN, PIOS_LED_LED2_GPIO_PIN, PIOS_LED_LED3_GPIO_PIN, PIOS_LED_LED4_GPIO_PIN }
|
|
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK, PIOS_LED_LED2_GPIO_CLK, PIOS_LED_LED3_GPIO_CLK, PIOS_LED_LED4_GPIO_CLK }
|
|
#endif
|
|
|
|
/*#define USB_LED_ON PIOS_LED_On(LED1)
|
|
#define USB_LED_OFF PIOS_LED_Off(LED1)
|
|
#define USB_LED_TOGGLE PIOS_LED_Toggle(LED1)
|
|
*/
|
|
|
|
// *****************************************************************
|
|
// Delay Timer
|
|
|
|
//#define PIOS_DELAY_TIMER TIM2
|
|
//#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
|
|
#define PIOS_DELAY_TIMER TIM1
|
|
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE)
|
|
|
|
// *****************************************************************
|
|
// Timer interrupt
|
|
|
|
/*#define TIMER_INT_TIMER TIM3
|
|
#define TIMER_INT_FUNC TIM3_IRQHandler
|
|
#define TIMER_INT_PRIORITY 2
|
|
|
|
// *****************************************************************
|
|
// Stop watch timer
|
|
|
|
#define STOPWATCH_TIMER TIM4*/
|
|
|
|
//------------------------
|
|
// PIOS_SPI
|
|
// See also pios_board.c
|
|
//------------------------
|
|
#define PIOS_SPI_MAX_DEVS 1
|
|
extern uint32_t pios_spi_port_id;
|
|
#define PIOS_SPI_PORT (pios_spi_port_id)
|
|
|
|
//-------------------------
|
|
// PIOS_USART
|
|
//
|
|
// See also pios_board.c
|
|
//-------------------------
|
|
#define PIOS_USART_MAX_DEVS 5
|
|
|
|
//-------------------------
|
|
// PIOS_COM
|
|
//
|
|
// See also pios_board.c
|
|
//-------------------------
|
|
#define PIOS_COM_MAX_DEVS 5
|
|
extern uint32_t pios_com_telem_rf_id;
|
|
extern uint32_t pios_com_gps_id;
|
|
extern uint32_t pios_com_aux_id;
|
|
extern uint32_t pios_com_telem_usb_id;
|
|
extern uint32_t pios_com_cotelem_id;
|
|
#define PIOS_COM_AUX (pios_com_aux_id)
|
|
#define PIOS_COM_GPS (pios_com_gps_id)
|
|
#define PIOS_COM_TELEM_USB (pios_com_telem_usb_id)
|
|
#define PIOS_COM_TELEM_RF (pios_com_telem_rf_id)
|
|
#define PIOS_COM_COTELEM (pios_com_cotelem_id)
|
|
#define PIOS_COM_DEBUG PIOS_COM_AUX
|
|
|
|
|
|
extern uint32_t pios_com_hkosd_id;
|
|
#define PIOS_COM_OSD (pios_com_hkosd_id)
|
|
|
|
//extern uint32_t pios_com_serial_id;
|
|
//#define PIOS_COM_SERIAL (pios_com_serial_id)
|
|
//#define PIOS_COM_DEBUG PIOS_COM_SERIAL // uncomment this to send debug info out the serial port
|
|
|
|
//extern uint32_t pios_com_gps_id;
|
|
//#define PIOS_COM_GPS (pios_com_gps_id)
|
|
|
|
|
|
#if defined(PIOS_INCLUDE_USB_HID)
|
|
extern uint32_t pios_com_telem_usb_id;
|
|
#define PIOS_COM_TELEM_USB (pios_com_telem_usb_id)
|
|
#endif
|
|
|
|
#if defined(PIOS_COM_DEBUG)
|
|
// #define DEBUG_PRINTF(...) PIOS_COM_SendFormattedString(PIOS_COM_DEBUG, __VA_ARGS__)
|
|
#define DEBUG_PRINTF(...) PIOS_COM_SendFormattedStringNonBlocking(PIOS_COM_DEBUG, __VA_ARGS__)
|
|
#else
|
|
#define DEBUG_PRINTF(...)
|
|
#endif
|
|
|
|
// *****************************************************************
|
|
// ADC
|
|
|
|
//-------------------------
|
|
// ADC
|
|
// PIOS_ADC_PinGet(0) = External voltage
|
|
// PIOS_ADC_PinGet(1) = AUX1 (PX2IO external pressure port)
|
|
// PIOS_ADC_PinGet(2) = AUX2 (Current sensor, if available)
|
|
// PIOS_ADC_PinGet(3) = AUX3
|
|
// PIOS_ADC_PinGet(4) = VREF
|
|
// PIOS_ADC_PinGet(5) = Temperature sensor
|
|
//-------------------------
|
|
|
|
#define PIOS_DMA_PIN_CONFIG \
|
|
{ \
|
|
{GPIOC, GPIO_Pin_0, ADC_Channel_10}, \
|
|
{GPIOC, GPIO_Pin_1, ADC_Channel_11}, \
|
|
{GPIOC, GPIO_Pin_2, ADC_Channel_12}, \
|
|
{GPIOC, GPIO_Pin_3, ADC_Channel_13}, \
|
|
{GPIOA, GPIO_Pin_7, ADC_Channel_7}, \
|
|
{NULL, 0, ADC_Channel_Vrefint}, /* Voltage reference */\
|
|
{NULL, 0, ADC_Channel_TempSensor} /* Temperature sensor */\
|
|
}
|
|
|
|
/* we have to do all this to satisfy the PIOS_ADC_MAX_SAMPLES define in pios_adc.h */
|
|
/* which is annoying because this then determines the rate at which we generate buffer turnover events */
|
|
/* the objective here is to get enough buffer space to support 100Hz averaging rate */
|
|
#define PIOS_ADC_NUM_CHANNELS 7
|
|
#define PIOS_ADC_MAX_OVERSAMPLING 10
|
|
#define PIOS_ADC_USE_ADC2 0
|
|
|
|
#if 0
|
|
|
|
// *****************************************************************
|
|
// GPIO output pins
|
|
|
|
// GPIO_Mode_Out_OD Open Drain Output
|
|
// GPIO_Mode_Out_PP Push-Pull Output
|
|
// GPIO_Mode_AF_OD Open Drain Output Alternate-Function
|
|
// GPIO_Mode_AF_PP Push-Pull Output Alternate-Function
|
|
|
|
// Serial port RTS line
|
|
#define PIOS_GPIO_OUT_0_PORT GPIOB
|
|
#define PIOS_GPIO_OUT_0_PIN GPIO_Pin_15
|
|
#define PIOS_GPIO_OUT_0_GPIO_CLK RCC_APB2Periph_GPIOB
|
|
|
|
// RF module chip-select line
|
|
#define PIOS_GPIO_OUT_1_PORT GPIOA
|
|
#define PIOS_GPIO_OUT_1_PIN GPIO_Pin_4
|
|
#define PIOS_GPIO_OUT_1_GPIO_CLK RCC_APB2Periph_GPIOA
|
|
|
|
// PPM OUT line
|
|
#define PIOS_GPIO_OUT_2_PORT GPIOB
|
|
#define PIOS_GPIO_OUT_2_PIN GPIO_Pin_10
|
|
#define PIOS_GPIO_OUT_2_GPIO_CLK RCC_APB2Periph_GPIOB
|
|
|
|
// spare pin
|
|
#define PIOS_GPIO_OUT_3_PORT GPIOA
|
|
#define PIOS_GPIO_OUT_3_PIN GPIO_Pin_0
|
|
#define PIOS_GPIO_OUT_3_GPIO_CLK RCC_APB2Periph_GPIOA
|
|
|
|
// spare pin
|
|
#define PIOS_GPIO_OUT_4_PORT GPIOA
|
|
#define PIOS_GPIO_OUT_4_PIN GPIO_Pin_1
|
|
#define PIOS_GPIO_OUT_4_GPIO_CLK RCC_APB2Periph_GPIOA
|
|
|
|
// spare pin
|
|
#define PIOS_GPIO_OUT_5_PORT GPIOC
|
|
#define PIOS_GPIO_OUT_5_PIN GPIO_Pin_13
|
|
#define PIOS_GPIO_OUT_5_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
// spare pin
|
|
#define PIOS_GPIO_OUT_6_PORT GPIOC
|
|
#define PIOS_GPIO_OUT_6_PIN GPIO_Pin_14
|
|
#define PIOS_GPIO_OUT_6_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
// spare pin
|
|
#define PIOS_GPIO_OUT_7_PORT GPIOC
|
|
#define PIOS_GPIO_OUT_7_PIN GPIO_Pin_15
|
|
#define PIOS_GPIO_OUT_7_GPIO_CLK RCC_APB2Periph_GPIOC
|
|
|
|
#define PIOS_GPIO_NUM 8
|
|
#define PIOS_GPIO_PORTS {PIOS_GPIO_OUT_0_PORT, PIOS_GPIO_OUT_1_PORT, PIOS_GPIO_OUT_2_PORT, PIOS_GPIO_OUT_3_PORT, PIOS_GPIO_OUT_4_PORT, PIOS_GPIO_OUT_5_PORT, PIOS_GPIO_OUT_6_PORT, PIOS_GPIO_OUT_7_PORT}
|
|
#define PIOS_GPIO_PINS {PIOS_GPIO_OUT_0_PIN, PIOS_GPIO_OUT_1_PIN, PIOS_GPIO_OUT_2_PIN, PIOS_GPIO_OUT_3_PIN, PIOS_GPIO_OUT_4_PIN, PIOS_GPIO_OUT_5_PIN, PIOS_GPIO_OUT_6_PIN, PIOS_GPIO_OUT_7_PIN}
|
|
#define PIOS_GPIO_CLKS {PIOS_GPIO_OUT_0_GPIO_CLK, PIOS_GPIO_OUT_1_GPIO_CLK, PIOS_GPIO_OUT_2_GPIO_CLK, PIOS_GPIO_OUT_3_GPIO_CLK, PIOS_GPIO_OUT_4_GPIO_CLK, PIOS_GPIO_OUT_5_GPIO_CLK, PIOS_GPIO_OUT_6_GPIO_CLK, PIOS_GPIO_OUT_7_GPIO_CLK}
|
|
|
|
#define SERIAL_RTS_ENABLE PIOS_GPIO_Enable(0)
|
|
#define SERIAL_RTS_SET PIOS_GPIO_Off(0)
|
|
#define SERIAL_RTS_CLEAR PIOS_GPIO_On(0)
|
|
|
|
#define RF_CS_ENABLE PIOS_GPIO_Enable(1)
|
|
#define RF_CS_HIGH PIOS_GPIO_Off(1)
|
|
#define RF_CS_LOW PIOS_GPIO_On(1)
|
|
|
|
#define PPM_OUT_PIN PIOS_GPIO_OUT_2_PIN
|
|
#define PPM_OUT_PORT PIOS_GPIO_OUT_2_PORT
|
|
#define PPM_OUT_ENABLE PIOS_GPIO_Enable(2)
|
|
#define PPM_OUT_HIGH PIOS_GPIO_Off(2)
|
|
#define PPM_OUT_LOW PIOS_GPIO_On(2)
|
|
|
|
#define SPARE1_ENABLE PIOS_GPIO_Enable(3)
|
|
#define SPARE1_HIGH PIOS_GPIO_Off(3)
|
|
#define SPARE1_LOW PIOS_GPIO_On(3)
|
|
|
|
#define SPARE2_ENABLE PIOS_GPIO_Enable(4)
|
|
#define SPARE2_HIGH PIOS_GPIO_Off(4)
|
|
#define SPARE2_LOW PIOS_GPIO_On(4)
|
|
|
|
#define SPARE3_ENABLE PIOS_GPIO_Enable(5)
|
|
#define SPARE3_HIGH PIOS_GPIO_Off(5)
|
|
#define SPARE3_LOW PIOS_GPIO_On(5)
|
|
|
|
#define SPARE4_ENABLE PIOS_GPIO_Enable(6)
|
|
#define SPARE4_HIGH PIOS_GPIO_Off(6)
|
|
#define SPARE4_LOW PIOS_GPIO_On(6)
|
|
|
|
#define SPARE5_ENABLE PIOS_GPIO_Enable(7)
|
|
#define SPARE5_HIGH PIOS_GPIO_Off(7)
|
|
#define SPARE5_LOW PIOS_GPIO_On(7)
|
|
|
|
// *****************************************************************
|
|
// GPIO input pins
|
|
|
|
// GPIO_Mode_AIN Analog Input
|
|
// GPIO_Mode_IN_FLOATING Input Floating
|
|
// GPIO_Mode_IPD Input Pull-Down
|
|
// GPIO_Mode_IPU Input Pull-up
|
|
|
|
// API mode line
|
|
#define GPIO_IN_0_PORT GPIOB
|
|
#define GPIO_IN_0_PIN GPIO_Pin_13
|
|
#define GPIO_IN_0_MODE GPIO_Mode_IPU
|
|
|
|
// Serial port CTS line
|
|
#define GPIO_IN_1_PORT GPIOB
|
|
#define GPIO_IN_1_PIN GPIO_Pin_14
|
|
#define GPIO_IN_1_MODE GPIO_Mode_IPU
|
|
|
|
// VBUS sense line
|
|
#define GPIO_IN_2_PORT GPIOA
|
|
#define GPIO_IN_2_PIN GPIO_Pin_8
|
|
#define GPIO_IN_2_MODE GPIO_Mode_IN_FLOATING
|
|
|
|
// 868MHz jumper option
|
|
#define GPIO_IN_3_PORT GPIOB
|
|
#define GPIO_IN_3_PIN GPIO_Pin_8
|
|
#define GPIO_IN_3_MODE GPIO_Mode_IPU
|
|
|
|
// 915MHz jumper option
|
|
#define GPIO_IN_4_PORT GPIOB
|
|
#define GPIO_IN_4_PIN GPIO_Pin_9
|
|
#define GPIO_IN_4_MODE GPIO_Mode_IPU
|
|
|
|
// RF INT line
|
|
#define GPIO_IN_5_PORT GPIOA
|
|
#define GPIO_IN_5_PIN GPIO_Pin_2
|
|
#define GPIO_IN_5_MODE GPIO_Mode_IN_FLOATING
|
|
|
|
// RF misc line
|
|
#define GPIO_IN_6_PORT GPIOB
|
|
#define GPIO_IN_6_PIN GPIO_Pin_0
|
|
#define GPIO_IN_6_MODE GPIO_Mode_IN_FLOATING
|
|
|
|
// PPM IN line
|
|
#define PPM_IN_PORT GPIOB
|
|
#define PPM_IN_PIN GPIO_Pin_11
|
|
#define PPM_IN_MODE GPIO_Mode_IPD
|
|
|
|
#define GPIO_IN_NUM 8
|
|
#define GPIO_IN_PORTS { GPIO_IN_0_PORT, GPIO_IN_1_PORT, GPIO_IN_2_PORT, GPIO_IN_3_PORT, GPIO_IN_4_PORT, GPIO_IN_5_PORT, GPIO_IN_6_PORT, PPM_IN_PORT }
|
|
#define GPIO_IN_PINS { GPIO_IN_0_PIN, GPIO_IN_1_PIN, GPIO_IN_2_PIN, GPIO_IN_3_PIN, GPIO_IN_4_PIN, GPIO_IN_5_PIN, GPIO_IN_6_PIN, PPM_IN_PIN }
|
|
#define GPIO_IN_MODES { GPIO_IN_0_MODE, GPIO_IN_1_MODE, GPIO_IN_2_MODE, GPIO_IN_3_MODE, GPIO_IN_4_MODE, GPIO_IN_5_MODE, GPIO_IN_6_MODE, PPM_IN_MODE }
|
|
|
|
#define API_MODE_PIN 0
|
|
#define SERIAL_CTS_PIN 1
|
|
#define VBUS_SENSE_PIN 2
|
|
#define _868MHz_PIN 3
|
|
#define _915MHz_PIN 4
|
|
#define RF_INT_PIN 5
|
|
#define RF_MISC_PIN 6
|
|
|
|
#endif
|
|
|
|
// *****************************************************************
|
|
// USB
|
|
|
|
#if defined(PIOS_INCLUDE_USB_HID)
|
|
#define PIOS_USB_ENABLED 1
|
|
#define PIOS_USB_DETECT_GPIO_PORT GPIO_IN_2_PORT
|
|
#define PIOS_USB_DETECT_GPIO_PIN GPIO_IN_2_PIN
|
|
#define PIOS_USB_DETECT_EXTI_LINE EXTI_Line4
|
|
#define PIOS_IRQ_USB_PRIORITY 8
|
|
#define PIOS_USB_RX_BUFFER_SIZE 512
|
|
#define PIOS_USB_TX_BUFFER_SIZE 512
|
|
#endif
|
|
|
|
|
|
#if 0
|
|
// *****************************************************************
|
|
// VIDEO
|
|
#define PIOS_VIDEO_HSYNC_GPIO_PORT GPIOD
|
|
#define PIOS_VIDEO_HSYNC_GPIO_PIN GPIO_Pin_0
|
|
#define PIOS_VIDEO_HSYNC_PORT_SOURCE GPIO_PortSourceGPIOD
|
|
#define PIOS_VIDEO_HSYNC_PIN_SOURCE GPIO_PinSource0
|
|
#define PIOS_VIDEO_HSYNC_CLK RCC_AHB1Periph_GPIOD
|
|
#define PIOS_VIDEO_HSYNC_EXTI_LINE EXTI_Line0
|
|
#define PIOS_VIDEO_HSYNC_EXTI_PORT_SOURCE EXTI_PortSourceGPIOD
|
|
#define PIOS_VIDEO_HSYNC_EXTI_PIN_SOURCE EXTI_PinSource0
|
|
#define PIOS_VIDEO_HSYNC_IRQn EXTI0_IRQn
|
|
#define PIOS_VIDEO_HSYNC_PRIO PIOS_IRQ_PRIO_HIGHEST
|
|
//#define PIOS_VIDEO_SYNC_PRIO 1
|
|
|
|
#define PIOS_VIDEO_VSYNC_GPIO_PORT GPIOC
|
|
#define PIOS_VIDEO_VSYNC_GPIO_PIN GPIO_Pin_11
|
|
#define PIOS_VIDEO_VSYNC_PORT_SOURCE GPIO_PortSourceGPIOC
|
|
#define PIOS_VIDEO_VSYNC_PIN_SOURCE GPIO_PinSource11
|
|
#define PIOS_VIDEO_VSYNC_CLK RCC_AHB1Periph_GPIOC
|
|
#define PIOS_VIDEO_VSYNC_EXTI_LINE EXTI_Line11
|
|
#define PIOS_VIDEO_VSYNC_EXTI_PORT_SOURCE EXTI_PortSourceGPIOC
|
|
#define PIOS_VIDEO_VSYNC_EXTI_PIN_SOURCE EXTI_PinSource11
|
|
#define PIOS_VIDEO_VSYNC_IRQn EXTI15_10_IRQn
|
|
#define PIOS_VIDEO_VSYNC_PRIO PIOS_IRQ_PRIO_HIGHEST
|
|
#endif
|
|
|
|
// *****************************************************************
|
|
//--------------------------
|
|
// Timer controller settings
|
|
//--------------------------
|
|
#define PIOS_TIM_MAX_DEVS 6
|
|
|
|
//-------------------------
|
|
// USB
|
|
//-------------------------
|
|
#define PIOS_USB_MAX_DEVS 1
|
|
#define PIOS_USB_ENABLED 1 /* Should remove all references to this */
|
|
#define PIOS_USB_HID_MAX_DEVS 1
|
|
|
|
|
|
#endif /* PIOS_BOARD_H */
|