mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-01 09:24:10 +01:00
60 lines
5.1 KiB
XML
60 lines
5.1 KiB
XML
<xml>
|
|
<object name="SystemIdentSettings" singleinstance="true" settings="true" category="Control">
|
|
<description>The input to the PID tuning.</description>
|
|
<field name="Tau" units="ln(sec)" type="float" elements="1" defaultvalue="-4.0"/>
|
|
<!-- Beta default valuses 10.0 10.0 7.0 so that SystemIdent mode can be run without AutoTune -->
|
|
<field name="Beta" units="" type="float" elementnames="Roll,Pitch,Yaw" defaultvalue="10.0,10.0,7.0"/>
|
|
<!-- Decrease damping to make your aircraft response more rapidly. Increase it for more stability. -->
|
|
<!-- Increasing noise (sensitivity) will make your aircraft respond more rapidly, but will cause twitches due to noise. -->
|
|
<!-- Use RateDamp 130 with RateNoise 08 for very smooth flight. -->
|
|
<!-- Use RateDamp 110 with RateNoise 10 for default flight. -->
|
|
<!-- Use RateDamp 100 with RateNoise 13 for very snappy flight. -->
|
|
<!-- RateNoise is [0,30] default 10. -->
|
|
<!-- RateDamp is [50,150] default 110. -->
|
|
<!-- per https://github.com/d-ronin/dRonin/pull/811/files change min ratedamp to 85. -->
|
|
<!-- So RateDamp is [85,150] default 110. -->
|
|
<!-- Extrapolated multiplicatively: -->
|
|
<!-- Use RateDamp 153.636363636 with RateNoise 06.4 for very very smooth flight. -->
|
|
<!-- Use RateDamp 90.909090909 with RateNoise 16.9 for very very snappy flight. -->
|
|
<!-- Extrapolated additively: -->
|
|
<!-- Use RateDamp 150 with RateNoise 06 for very very smooth flight. -->
|
|
<!-- Use RateDamp 90 with RateNoise 16 for very very snappy flight. -->
|
|
<!-- use additive so the piecewise algorithm will give the exact recommended pairs at 25%, 50%, and 75% of slider -->
|
|
<field name="DampMin" units="" type="uint8" elements="1" defaultvalue="90"/>
|
|
<field name="DampRate" units="" type="uint8" elements="1" defaultvalue="110"/>
|
|
<field name="DampMax" units="" type="uint8" elements="1" defaultvalue="150"/>
|
|
<field name="NoiseMin" units="" type="uint8" elements="1" defaultvalue="6"/>
|
|
<field name="NoiseRate" units="" type="uint8" elements="1" defaultvalue="10"/>
|
|
<field name="NoiseMax" units="" type="uint8" elements="1" defaultvalue="16"/>
|
|
<!-- <field name="CalculateYaw" units="" type="enum" elements="1" options="False,True,TrueIgnoreError" defaultvalue="True"/> -->
|
|
<field name="CalculateYaw" units="" type="enum" elements="1" options="False,TrueLimitToRatio,TrueIgnoreLimit" defaultvalue="TrueLimitToRatio"/>
|
|
<!-- <field name="YawBetaMin" units="" type="float" elements="1" defaultvalue="5.6"/> -->
|
|
<!-- Mateuze quad needs yaw P to be at most 2.6 times roll/pitch P to avoid yaw oscillation -->
|
|
<!-- Cliff sluggish 500 quad thinks that yaw P should be about 5.8 times roll/pitch P, but can easily (and better) live with 2.6 -->
|
|
<field name="YawToRollPitchPIDRatioMin" units="" type="float" elements="1" defaultvalue="1.0"/>
|
|
<field name="YawToRollPitchPIDRatioMax" units="" type="float" elements="1" defaultvalue="2.5"/>
|
|
<!-- <field name="YawPIDRatioFunction" units="" type="enum" elements="1" options="Disable,Limit" defaultvalue="Limit"/> -->
|
|
<field name="DestinationPidBank" units="bank#" type="uint8" elements="1" defaultvalue="2"/>
|
|
<field name="TuningDuration" units="sec" type="uint8" elements="1" defaultvalue="60"/>
|
|
<!-- SmoothQuickSource: the smooth vs. quick PID selector -->
|
|
<!-- 0 = disabled -->
|
|
<!-- 10 thru 13 correspond to accessory0 -> accessory3 transmitter knobs -->
|
|
<!-- an accessory knob works as expected, with full left being smoothest and full right being quickest -->
|
|
<!-- 23, 25, and 27 are discrete 3, 5, and 7 position rount robin selectors -->
|
|
<!-- incremented by quickly double toggling the fms 3 times (starting outside autotune mode -->
|
|
<!-- with each double toggle going into and back out of autotune) to go to the next position -->
|
|
<!-- think of the positions on a scale from 0 to 100, with smoothest being 0 and quickest being 100, and you start out at 50 -->
|
|
<!-- 23 (3 stops) means stops at 50, then 100, then 0 then back to 50 -->
|
|
<!-- 25 (5 stops) means stops at 50, 75, 100, 0, 25 (repeat as you toggle) -->
|
|
<!-- 27 (7 stops) means stops at 50, 67, 83, 100, 0, 17, 33 (repeat as you toggle) -->
|
|
<!-- 25 is special in that the 3 middle values (25, 50, 75) are exactly those that are recommended for smooth, normal, and quick responses -->
|
|
<field name="SmoothQuickSource" units="" type="uint8" elements="1" defaultvalue="25"/>
|
|
<field name="DisableSanityChecks" units="bool" type="enum" elements="1" options="False,True" defaultvalue="False"/>
|
|
<field name="Complete" units="bool" type="enum" elements="1" options="False,True" defaultvalue="False"/>
|
|
<access gcs="readwrite" flight="readwrite"/>
|
|
<telemetrygcs acked="true" updatemode="onchange" period="0"/>
|
|
<telemetryflight acked="true" updatemode="onchange" period="0"/>
|
|
<logging updatemode="manual" period="0"/>
|
|
</object>
|
|
</xml>
|