mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-10 18:24:11 +01:00
6e406c0232
The USE_BOOTLOADER compile flag was only being used to determine where the ISR vector table was located. Provide this explicitly from the linker since it knows exactly where it is putting the ISR vector table.
482 lines
14 KiB
Makefile
482 lines
14 KiB
Makefile
#####
|
|
# Project: OpenPilot Pip Modems
|
|
#
|
|
#
|
|
# Makefile for OpenPilot Pip Modem project
|
|
#
|
|
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
|
|
#
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful, but
|
|
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
# for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License along
|
|
# with this program; if not, write to the Free Software Foundation, Inc.,
|
|
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
#####
|
|
|
|
WHEREAMI := $(dir $(lastword $(MAKEFILE_LIST)))
|
|
TOP := $(realpath $(WHEREAMI)/../../)
|
|
include $(TOP)/make/firmware-defs.mk
|
|
include $(TOP)/make/boards/$(BOARD_NAME)/board-info.mk
|
|
|
|
# Target file name (without extension).
|
|
TARGET := fw_$(BOARD_NAME)
|
|
|
|
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
|
|
OUTDIR := $(TOP)/build/$(TARGET)
|
|
|
|
# Debugging (YES/NO) ?
|
|
DEBUG ?= NO
|
|
|
|
# Use Code Sourcery toolchain (YES/NO) ?
|
|
CODE_SOURCERY ?= YES
|
|
|
|
ifeq ($(CODE_SOURCERY), YES)
|
|
REMOVE_CMD = cs-rm
|
|
else
|
|
REMOVE_CMD = rm
|
|
endif
|
|
|
|
FLASH_TOOL = OPENOCD
|
|
|
|
# Include the USB files (YES/NO) ?
|
|
USE_USB = YES
|
|
|
|
# Paths
|
|
HOME_DIR = ./
|
|
HOME_DIR_INC = $(HOME_DIR)/inc
|
|
PIOS = ../PiOS
|
|
PIOSINC = $(PIOS)/inc
|
|
FLIGHTLIB = ../Libraries
|
|
FLIGHTLIBINC = $(FLIGHTLIB)/inc
|
|
PIOSSTM32F10X = $(PIOS)/STM32F10x
|
|
PIOSCOMMON = $(PIOS)/Common
|
|
PIOSBOARDS = $(PIOS)/Boards
|
|
APPLIBDIR = $(PIOSSTM32F10X)/Libraries
|
|
STMLIBDIR = $(APPLIBDIR)
|
|
STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver
|
|
ifeq ($(USE_USB), YES)
|
|
STMUSBDIR = $(STMLIBDIR)/STM32_USB-FS-Device_Driver
|
|
endif
|
|
STMSPDSRCDIR = $(STMSPDDIR)/src
|
|
STMSPDINCDIR = $(STMSPDDIR)/inc
|
|
ifeq ($(USE_USB), YES)
|
|
STMUSBSRCDIR = $(STMUSBDIR)/src
|
|
STMUSBINCDIR = $(STMUSBDIR)/inc
|
|
endif
|
|
CMSISDIR = $(STMLIBDIR)/CMSIS/Core/CM3
|
|
BOOT = ../Bootloaders/AHRS
|
|
BOOTINC = $(BOOT)/inc
|
|
|
|
|
|
# List C source files here. (C dependencies are automatically generated.)
|
|
# use file-extension c for "c-only"-files
|
|
|
|
## Core:
|
|
SRC += $(HOME_DIR)/main.c
|
|
SRC += $(HOME_DIR)/pios_board.c
|
|
SRC += $(HOME_DIR)/crc.c
|
|
SRC += $(HOME_DIR)/aes.c
|
|
SRC += $(HOME_DIR)/rfm22b.c
|
|
SRC += $(HOME_DIR)/packet_handler.c
|
|
SRC += $(HOME_DIR)/stream.c
|
|
SRC += $(HOME_DIR)/ppm.c
|
|
SRC += $(HOME_DIR)/transparent_comms.c
|
|
#SRC += $(HOME_DIR)/api_comms.c
|
|
SRC += $(HOME_DIR)/api_config.c
|
|
SRC += $(HOME_DIR)/saved_settings.c
|
|
SRC += $(HOME_DIR)/gpio_in.c
|
|
SRC += $(HOME_DIR)/stopwatch.c
|
|
SRC += $(HOME_DIR)/watchdog.c
|
|
SRC += $(FLIGHTLIB)/fifo_buffer.c
|
|
ifeq ($(USE_USB), YES)
|
|
SRC += $(HOME_DIR)/pios_usb_hid_desc.c
|
|
endif
|
|
|
|
|
|
## PIOS Hardware (STM32F10x)
|
|
SRC += $(PIOSSTM32F10X)/pios_sys.c
|
|
SRC += $(PIOSSTM32F10X)/pios_led.c
|
|
SRC += $(PIOSSTM32F10X)/pios_delay.c
|
|
SRC += $(PIOSSTM32F10X)/pios_usart.c
|
|
SRC += $(PIOSSTM32F10X)/pios_irq.c
|
|
SRC += $(PIOSSTM32F10X)/pios_adc.c
|
|
SRC += $(PIOSSTM32F10X)/pios_gpio.c
|
|
SRC += $(PIOSSTM32F10X)/pios_spi.c
|
|
SRC += $(PIOSSTM32F10X)/pios_ppm.c
|
|
|
|
# PIOS USB related files (seperated to make code maintenance more easy)
|
|
ifeq ($(USE_USB), YES)
|
|
SRC += $(PIOSSTM32F10X)/pios_usb_hid.c
|
|
#SRC += $(PIOSSTM32F10X)/pios_usb_hid_desc.c
|
|
#SRC += $(PIOSSTM32F10X)/pios_usb_hid_endp.c
|
|
SRC += $(PIOSSTM32F10X)/pios_usb_hid_istr.c
|
|
SRC += $(PIOSSTM32F10X)/pios_usb_hid_prop.c
|
|
SRC += $(PIOSSTM32F10X)/pios_usb_hid_pwr.c
|
|
endif
|
|
|
|
## PIOS Hardware (Common)
|
|
SRC += $(PIOSCOMMON)/pios_com.c
|
|
SRC += $(PIOSCOMMON)/printf-stdarg.c
|
|
|
|
## CMSIS for STM32
|
|
SRC += $(CMSISDIR)/core_cm3.c
|
|
SRC += $(CMSISDIR)/system_stm32f10x.c
|
|
|
|
## Used parts of the STM-Library
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_adc.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_crc.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_dac.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_dbgmcu.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_exti.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_iwdg.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_i2c.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c
|
|
SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c
|
|
SRC += $(STMSPDSRCDIR)/misc.c
|
|
|
|
## STM32 USB Library
|
|
ifeq ($(USE_USB), YES)
|
|
SRC += $(STMUSBSRCDIR)/usb_core.c
|
|
SRC += $(STMUSBSRCDIR)/usb_init.c
|
|
SRC += $(STMUSBSRCDIR)/usb_int.c
|
|
SRC += $(STMUSBSRCDIR)/usb_mem.c
|
|
SRC += $(STMUSBSRCDIR)/usb_regs.c
|
|
SRC += $(STMUSBSRCDIR)/usb_sil.c
|
|
endif
|
|
|
|
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
|
|
# use file-extension c for "c-only"-files
|
|
## just for testing, timer.c could be compiled in thumb-mode too
|
|
SRCARM =
|
|
|
|
# List C++ source files here.
|
|
# use file-extension .cpp for C++-files (not .C)
|
|
CPPSRC =
|
|
|
|
# List C++ source files here which must be compiled in ARM-Mode.
|
|
# use file-extension .cpp for C++-files (not .C)
|
|
#CPPSRCARM = $(TARGET).cpp
|
|
CPPSRCARM =
|
|
|
|
# List Assembler source files here.
|
|
# Make them always end in a capital .S. Files ending in a lowercase .s
|
|
# will not be considered source files but generated files (assembler
|
|
# output from the compiler), and will be deleted upon "make clean"!
|
|
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
|
# it will preserve the spelling of the filenames, and gcc itself does
|
|
# care about how the name is spelled on its command-line.
|
|
ASRC = $(PIOSSTM32F10X)/startup_stm32f10x_$(MODEL)$(MODEL_SUFFIX).S
|
|
|
|
# List Assembler source files here which must be assembled in ARM-Mode..
|
|
ASRCARM =
|
|
|
|
# List any extra directories to look for include files here.
|
|
# Each directory must be seperated by a space.
|
|
EXTRAINCDIRS += $(HOME_DIR)
|
|
EXTRAINCDIRS += $(HOME_DIR_INC)
|
|
EXTRAINCDIRS += $(PIOS)
|
|
EXTRAINCDIRS += $(PIOSINC)
|
|
EXTRAINCDIRS += $(FLIGHTLIBINC)
|
|
EXTRAINCDIRS += $(PIOSSTM32F10X)
|
|
EXTRAINCDIRS += $(PIOSCOMMON)
|
|
EXTRAINCDIRS += $(PIOSBOARDS)
|
|
EXTRAINCDIRS += $(STMSPDINCDIR)
|
|
ifeq ($(USE_USB), YES)
|
|
EXTRAINCDIRS += $(STMUSBINCDIR)
|
|
endif
|
|
EXTRAINCDIRS += $(CMSISDIR)
|
|
EXTRAINCDIRS += $(BOOTINC)
|
|
|
|
# List any extra directories to look for library files here.
|
|
# Also add directories where the linker should search for
|
|
# includes from linker-script to the list
|
|
# Each directory must be seperated by a space.
|
|
EXTRA_LIBDIRS =
|
|
|
|
# Extra Libraries
|
|
# Each library-name must be seperated by a space.
|
|
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
|
|
# EXTRA_LIBS = xyz abc efsl
|
|
# for newlib-lpc (file: libnewlibc-lpc.a):
|
|
# EXTRA_LIBS = newlib-lpc
|
|
EXTRA_LIBS =
|
|
|
|
# Path to Linker-Scripts
|
|
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s].
|
|
# 0 = turn off optimization. s = optimize for size.
|
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
|
|
ifeq ($(DEBUG),YES)
|
|
OPT = 0
|
|
else
|
|
OPT = s
|
|
#OPT = 2
|
|
endif
|
|
|
|
# Output format. (can be ihex or binary or both)
|
|
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
|
|
# ihex to create a load-image in Intel hex format
|
|
#LOADFORMAT = ihex
|
|
#LOADFORMAT = binary
|
|
LOADFORMAT = both
|
|
|
|
# Debugging format.
|
|
DEBUGF = dwarf-2
|
|
|
|
# Place project-specific -D (define) and/or
|
|
# -U options for C here.
|
|
CDEFS = -DSTM32F10X_$(MODEL)
|
|
CDEFS += -DUSE_STDPERIPH_DRIVER
|
|
CDEFS += -DUSE_$(BOARD)
|
|
|
|
# Place project-specific -D and/or -U options for
|
|
# Assembler with preprocessor here.
|
|
#ADEFS = -DUSE_IRQ_ASM_WRAPPER
|
|
ADEFS = -D__ASSEMBLY__
|
|
|
|
# Compiler flag to set the C Standard level.
|
|
# c89 - "ANSI" C
|
|
# gnu89 - c89 plus GCC extensions
|
|
# c99 - ISO C99 standard (not yet fully implemented)
|
|
# gnu99 - c99 plus GCC extensions
|
|
CSTANDARD = -std=gnu99
|
|
|
|
#-----
|
|
|
|
# Compiler flags.
|
|
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
#
|
|
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
|
|
|
|
ifeq ($(DEBUG),YES)
|
|
CFLAGS = -g$(DEBUGF)
|
|
endif
|
|
|
|
CFLAGS += -O$(OPT)
|
|
ifeq ($(DEBUG),NO)
|
|
CFLAGS += -fdata-sections -ffunction-sections
|
|
endif
|
|
CFLAGS += -mcpu=$(MCU)
|
|
CFLAGS += $(CDEFS)
|
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
|
|
|
|
CFLAGS += -mapcs-frame
|
|
CFLAGS += -fomit-frame-pointer
|
|
ifeq ($(CODE_SOURCERY), YES)
|
|
CFLAGS += -fpromote-loop-indices
|
|
endif
|
|
|
|
CFLAGS += -Wall
|
|
CFLAGS += -Werror
|
|
CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
|
|
# Compiler flags to generate dependency files:
|
|
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
|
|
|
|
# flags only for C
|
|
#CONLYFLAGS += -Wnested-externs
|
|
CONLYFLAGS += $(CSTANDARD)
|
|
|
|
# Assembler flags.
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -ahlns: create listing
|
|
ASFLAGS = -mcpu=$(MCU) -I. -x assembler-with-cpp
|
|
ASFLAGS += $(ADEFS)
|
|
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
|
|
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
|
|
MATH_LIB = -lm
|
|
|
|
# Linker flags.
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
LDFLAGS = -nostartfiles -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections
|
|
ifeq ($(DEBUG),NO)
|
|
LDFLAGS += -Wl,-static -Wl,-s
|
|
endif
|
|
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
|
|
LDFLAGS += -lc
|
|
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
|
|
LDFLAGS += $(MATH_LIB)
|
|
LDFLAGS += -lc -lgcc
|
|
|
|
# Set linker-script name depending on selected submodel name
|
|
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_memory.ld
|
|
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_sections.ld
|
|
|
|
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).bin
|
|
# Program
|
|
OOCD_CL+=-c "flash write_image erase $(OOCD_LOADFILE) $(START_OF_FW_CODE) bin"
|
|
# Verify
|
|
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE) $(START_OF_FW_CODE) bin"
|
|
# reset target
|
|
OOCD_CL+=-c "reset run"
|
|
# terminate OOCD after programming
|
|
OOCD_CL+=-c shutdown
|
|
|
|
# Define programs and commands.
|
|
REMOVE = $(REMOVE_CMD) -f
|
|
###SHELL = sh
|
|
###COPY = cp
|
|
|
|
# List of all source files.
|
|
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
|
|
# List of all source files without directory and file-extension.
|
|
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
|
|
|
|
# Define all object files.
|
|
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
|
|
|
|
# Define all listing files (used for make clean).
|
|
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
|
|
# Define all depedency-files (used for make clean).
|
|
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
|
|
|
|
# Default target.
|
|
all: build
|
|
|
|
ifeq ($(LOADFORMAT),ihex)
|
|
build: elf hex lss sym
|
|
else
|
|
ifeq ($(LOADFORMAT),binary)
|
|
build: elf bin lss sym
|
|
else
|
|
ifeq ($(LOADFORMAT),both)
|
|
build: elf hex bin lss sym
|
|
else
|
|
$(error "$(MSG_FORMATERROR) $(FORMAT)")
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# Program the device.
|
|
ifeq ($(FLASH_TOOL),OPENOCD)
|
|
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
|
|
program: $(OUTDIR)/$(TARGET).bin
|
|
@echo ${quote}Programming with OPENOCD${quote}
|
|
$(OOCD_EXE) $(OOCD_CL)
|
|
endif
|
|
|
|
# Link: create ELF output file from object files.
|
|
$(eval $(call LINK_TEMPLATE, $(OUTDIR)/$(TARGET).elf, $(ALLOBJ)))
|
|
|
|
# Assemble: create object files from assembler source files.
|
|
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
|
|
|
|
# Assemble: create object files from assembler source files. ARM-only
|
|
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
|
|
|
|
# Compile: create object files from C source files.
|
|
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
|
|
|
|
# Compile: create object files from C source files. ARM-only
|
|
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
|
|
|
|
# Compile: create object files from C++ source files.
|
|
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
|
|
|
|
# Compile: create object files from C++ source files. ARM-only
|
|
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
|
|
|
|
# Compile: create assembler files from C source files. ARM/Thumb
|
|
$(eval $(call PARTIAL_COMPILE_TEMPLATE, SRC))
|
|
|
|
# Compile: create assembler files from C source files. ARM only
|
|
$(eval $(call PARTIAL_COMPILE_ARM_TEMPLATE, SRCARM))
|
|
|
|
$(OUTDIR)/$(TARGET).bin.o: $(OUTDIR)/$(TARGET).bin
|
|
|
|
$(eval $(call OPF_TEMPLATE,$(OUTDIR)/$(TARGET).bin,$(BOARD_TYPE),$(BOARD_REVISION)))
|
|
|
|
.PHONY: elf lss sym hex bin bino opf
|
|
elf: $(OUTDIR)/$(TARGET).elf
|
|
lss: $(OUTDIR)/$(TARGET).lss
|
|
sym: $(OUTDIR)/$(TARGET).sym
|
|
hex: $(OUTDIR)/$(TARGET).hex
|
|
bin: $(OUTDIR)/$(TARGET).bin
|
|
bino: $(OUTDIR)/$(TARGET).bin.o
|
|
opf: $(OUTDIR)/$(TARGET).opf
|
|
|
|
# Display sizes of sections.
|
|
$(eval $(call SIZE_TEMPLATE, $(OUTDIR)/$(TARGET).elf))
|
|
.PHONY: size
|
|
size: $(OUTDIR)/$(TARGET).elf_size
|
|
|
|
# Generate Doxygen documents
|
|
docs:
|
|
doxygen $(DOXYGENDIR)/doxygen.cfg
|
|
|
|
# Install: install binary file with prefix/suffix into install directory
|
|
install: $(OUTDIR)/$(TARGET).bin
|
|
ifneq ($(INSTALL_DIR),)
|
|
@echo $(MSG_INSTALLING) $(call toprel, $<)
|
|
$(V1) mkdir -p $(INSTALL_DIR)
|
|
$(V1) $(INSTALL) $< $(INSTALL_DIR)/$(INSTALL_PFX)$(TARGET)$(INSTALL_SFX).bin
|
|
else
|
|
$(error INSTALL_DIR must be specified for $@)
|
|
endif
|
|
|
|
# Target: clean project.
|
|
clean: clean_list
|
|
|
|
clean_list :
|
|
@echo $(MSG_CLEANING)
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).map
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).elf
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).hex
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).sym
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).lss
|
|
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin.o
|
|
$(V1) $(REMOVE) $(ALLOBJ)
|
|
$(V1) $(REMOVE) $(LSTFILES)
|
|
$(V1) $(REMOVE) $(DEPFILES)
|
|
$(V1) $(REMOVE) $(SRC:.c=.s)
|
|
$(V1) $(REMOVE) $(SRCARM:.c=.s)
|
|
$(V1) $(REMOVE) $(CPPSRC:.cpp=.s)
|
|
$(V1) $(REMOVE) $(CPPSRCARM:.cpp=.s)
|
|
|
|
|
|
# Create output files directory
|
|
# all known MS Windows OS define the ComSpec environment variable
|
|
ifdef ComSpec
|
|
$(shell md $(subst /,\\,$(OUTDIR)) 2>NUL)
|
|
else
|
|
$(shell mkdir -p $(OUTDIR) 2>/dev/null)
|
|
endif
|
|
|
|
# Include the dependency files.
|
|
ifdef ComSpec
|
|
-include $(shell md $(subst /,\\,$(OUTDIR))\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
|
|
else
|
|
-include $(shell mkdir -p $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
|
|
endif
|
|
|
|
# Listing of phony targets.
|
|
.PHONY : all build clean clean_list program install
|