rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Code Issues Releases Activity
9da2ffff2f
LibrePilot/flight/CopterControl/System/pios_board.c
James Cotton e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip 
configuration)
2012-06-02 11:00:42 -05:00

723 lines
20 KiB
C
Raw Blame History

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Pull in the board-specific static HW definitions.
* Including .c files is a bit ugly but this allows all of
* the HW definitions to be const and static to limit their
* scope.
*
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
*/
#include "board_hw_defs.c"
#include <pios.h>
#include <openpilot.h>
#include <uavobjectsinit.h>
#include <hwsettings.h>
#include <manualcontrolsettings.h>
#include <gcsreceiver.h>
/* One slot per selectable receiver group.
* eg. PWM, PPM, GCS, DSMMAINPORT, DSMFLEXIPORT, SBUS
* NOTE: No slot in this map for NONE.
*/
uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE];
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 32
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 12
#define PIOS_COM_GPS_RX_BUF_LEN 32
#define PIOS_COM_TELEM_USB_RX_BUF_LEN 65
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 65
#define PIOS_COM_BRIDGE_RX_BUF_LEN 65
#define PIOS_COM_BRIDGE_TX_BUF_LEN 12
uint32_t pios_com_telem_rf_id;
uint32_t pios_com_telem_usb_id;
uint32_t pios_com_vcp_id;
uint32_t pios_com_gps_id;
uint32_t pios_com_bridge_id;
/**
* Configuration for MPU6000 chip
*/
#if defined(PIOS_INCLUDE_MPU6000)
#include "pios_mpu6000.h"
static const struct pios_exti_cfg pios_exti_mpu6000_cfg __exti_config = {
.vector = PIOS_MPU6000_IRQHandler,
.line = EXTI_Line3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line3, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_mpu6000_cfg pios_mpu6000_cfg = {
.exti_cfg = &pios_exti_mpu6000_cfg,
.Fifo_store = PIOS_MPU6000_FIFO_TEMP_OUT | PIOS_MPU6000_FIFO_GYRO_X_OUT | PIOS_MPU6000_FIFO_GYRO_Y_OUT | PIOS_MPU6000_FIFO_GYRO_Z_OUT,
// Clock at 8 khz, downsampled by 8 for 1khz
.Smpl_rate_div = 15,
.interrupt_cfg = PIOS_MPU6000_INT_CLR_ANYRD,
.interrupt_en = PIOS_MPU6000_INTEN_DATA_RDY,
.User_ctl = PIOS_MPU6000_USERCTL_FIFO_EN,
.Pwr_mgmt_clk = PIOS_MPU6000_PWRMGMT_PLL_X_CLK,
.accel_range = PIOS_MPU6000_ACCEL_8G,
.gyro_range = PIOS_MPU6000_SCALE_500_DEG,
.filter = PIOS_MPU6000_LOWPASS_256_HZ
};
#endif /* PIOS_INCLUDE_MPU6000 */
static const struct flashfs_cfg flashfs_w25x_cfg = {
.table_magic = 0x85FB3C35,
.obj_magic = 0x3015AE71,
.obj_table_start = 0x00000010,
.obj_table_end = 0x00001000,
.sector_size = 0x00001000,
.chip_size = 0x00080000,
};
static const struct pios_flash_jedec_cfg flash_w25x_cfg = {
.sector_erase = 0x20,
.chip_erase = 0x60
};
static const struct flashfs_cfg flashfs_m25p_cfg = {
.table_magic = 0x85FB3D35,
.obj_magic = 0x3015A371,
.obj_table_start = 0x00000010,
.obj_table_end = 0x00010000,
.sector_size = 0x00010000,
.chip_size = 0x00200000,
};
static const struct pios_flash_jedec_cfg flash_m25p_cfg = {
.sector_erase = 0xD8,
.chip_erase = 0xC7
};
#include <pios_board_info.h>
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
int32_t init_test;
void PIOS_Board_Init(void) {
/* Delay system */
PIOS_DELAY_Init();
const struct pios_board_info * bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_SPI)
/* Set up the SPI interface to the serial flash */
switch(bdinfo->board_rev) {
case BOARD_REVISION_CC:
if (PIOS_SPI_Init(&pios_spi_flash_accel_id, &pios_spi_flash_accel_cfg_cc)) {
PIOS_Assert(0);
}
break;
case BOARD_REVISION_CC3D:
if (PIOS_SPI_Init(&pios_spi_flash_accel_id, &pios_spi_flash_accel_cfg_cc3d)) {
PIOS_Assert(0);
}
break;
default:
PIOS_Assert(0);
}
#endif
switch(bdinfo->board_rev) {
case BOARD_REVISION_CC:
PIOS_Flash_Jedec_Init(pios_spi_flash_accel_id, 1, &flash_w25x_cfg);
PIOS_FLASHFS_Init(&flashfs_w25x_cfg);
break;
case BOARD_REVISION_CC3D:
PIOS_Flash_Jedec_Init(pios_spi_flash_accel_id, 0, &flash_m25p_cfg);
PIOS_FLASHFS_Init(&flashfs_m25p_cfg);
break;
default:
PIOS_DEBUG_Assert(0);
}
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
#if defined(PIOS_INCLUDE_RTC)
/* Initialize the real-time clock and its associated tick */
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
HwSettingsInitialize();
#ifndef ERASE_FLASH
/* Initialize watchdog as early as possible to catch faults during init */
PIOS_WDG_Init();
#endif
/* Initialize the alarms library */
AlarmsInitialize();
/* Check for repeated boot failures */
PIOS_IAP_Init();
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
switch(bdinfo->board_rev) {
case BOARD_REVISION_CC:
PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg_cc);
break;
case BOARD_REVISION_CC3D:
PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg_cc3d);
break;
default:
PIOS_Assert(0);
}
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hwsettings_usb_vcpport;
/* Configure the USB VCP port */
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
}
switch (hwsettings_usb_vcpport) {
case HWSETTINGS_USB_VCPPORT_DISABLED:
break;
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hwsettings_usb_hidport;
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
}
switch (hwsettings_usb_hidport) {
case HWSETTINGS_USB_HIDPORT_DISABLED:
break;
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
#endif /* PIOS_INCLUDE_USB */
/* Configure the main IO port */
uint8_t hwsettings_DSMxBind;
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
uint8_t hwsettings_cc_mainport;
HwSettingsCC_MainPortGet(&hwsettings_cc_mainport);
switch (hwsettings_cc_mainport) {
case HWSETTINGS_CC_MAINPORT_DISABLED:
break;
case HWSETTINGS_CC_MAINPORT_TELEMETRY:
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_main_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_TELEM_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
break;
case HWSETTINGS_CC_MAINPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif /* PIOS_INCLUDE_SBUS */
break;
case HWSETTINGS_CC_MAINPORT_GPS:
#if defined(PIOS_INCLUDE_GPS)
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_main_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_GPS_RX_BUF_LEN);
PIOS_Assert(rx_buffer);
if (PIOS_COM_Init(&pios_com_gps_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_GPS_RX_BUF_LEN,
NULL, 0)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_GPS */
break;
case HWSETTINGS_CC_MAINPORT_DSM2:
case HWSETTINGS_CC_MAINPORT_DSMX10BIT:
case HWSETTINGS_CC_MAINPORT_DSMX11BIT:
#if defined(PIOS_INCLUDE_DSM)
{
enum pios_dsm_proto proto;
switch (hwsettings_cc_mainport) {
case HWSETTINGS_CC_MAINPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWSETTINGS_CC_MAINPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWSETTINGS_CC_MAINPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
uint32_t pios_usart_dsm_id;
if (PIOS_USART_Init(&pios_usart_dsm_id, &pios_usart_dsm_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_id;
if (PIOS_DSM_Init(&pios_dsm_id,
&pios_dsm_main_cfg,
&pios_usart_com_driver,
pios_usart_dsm_id,
proto, 0)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_rcvr_id;
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT] = pios_dsm_rcvr_id;
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWSETTINGS_CC_MAINPORT_COMAUX:
break;
case HWSETTINGS_CC_MAINPORT_COMBRIDGE:
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_main_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
PIOS_Assert(rx_buffer);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_bridge_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
break;
}
/* Configure the flexi port */
uint8_t hwsettings_cc_flexiport;
HwSettingsCC_FlexiPortGet(&hwsettings_cc_flexiport);
switch (hwsettings_cc_flexiport) {
case HWSETTINGS_CC_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_CC_FLEXIPORT_TELEMETRY:
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_flexi_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_TELEM_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
break;
case HWSETTINGS_CC_FLEXIPORT_COMBRIDGE:
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_flexi_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_bridge_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
break;
case HWSETTINGS_CC_FLEXIPORT_GPS:
#if defined(PIOS_INCLUDE_GPS)
{
uint32_t pios_usart_generic_id;
if (PIOS_USART_Init(&pios_usart_generic_id, &pios_usart_generic_flexi_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_GPS_RX_BUF_LEN);
PIOS_Assert(rx_buffer);
if (PIOS_COM_Init(&pios_com_gps_id, &pios_usart_com_driver, pios_usart_generic_id,
rx_buffer, PIOS_COM_GPS_RX_BUF_LEN,
NULL, 0)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_GPS */
break;
case HWSETTINGS_CC_FLEXIPORT_DSM2:
case HWSETTINGS_CC_FLEXIPORT_DSMX10BIT:
case HWSETTINGS_CC_FLEXIPORT_DSMX11BIT:
#if defined(PIOS_INCLUDE_DSM)
{
enum pios_dsm_proto proto;
switch (hwsettings_cc_flexiport) {
case HWSETTINGS_CC_FLEXIPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWSETTINGS_CC_FLEXIPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWSETTINGS_CC_FLEXIPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
uint32_t pios_usart_dsm_id;
if (PIOS_USART_Init(&pios_usart_dsm_id, &pios_usart_dsm_flexi_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_id;
if (PIOS_DSM_Init(&pios_dsm_id,
&pios_dsm_flexi_cfg,
&pios_usart_com_driver,
pios_usart_dsm_id,
proto, hwsettings_DSMxBind)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_rcvr_id;
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT] = pios_dsm_rcvr_id;
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWSETTINGS_CC_FLEXIPORT_COMAUX:
break;
case HWSETTINGS_CC_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexi_adapter_id, &pios_i2c_flexi_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
}
/* Configure the rcvr port */
uint8_t hwsettings_rcvrport;
HwSettingsCC_RcvrPortGet(&hwsettings_rcvrport);
switch (hwsettings_rcvrport) {
case HWSETTINGS_CC_RCVRPORT_DISABLED:
break;
case HWSETTINGS_CC_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
{
uint32_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg);
uint32_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_CC_RCVRPORT_PPM:
case HWSETTINGS_CC_RCVRPORT_PPMOUTPUTS:
#if defined(PIOS_INCLUDE_PPM)
{
uint32_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uint32_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PPM */
break;
}
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
/* Remap AFIO pin for PB4 (Servo 5 Out)*/
GPIO_PinRemapConfig( GPIO_Remap_SWJ_NoJTRST, ENABLE);
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
switch (hwsettings_rcvrport) {
case HWSETTINGS_CC_RCVRPORT_DISABLED:
case HWSETTINGS_CC_RCVRPORT_PWM:
case HWSETTINGS_CC_RCVRPORT_PPM:
PIOS_Servo_Init(&pios_servo_cfg);
break;
case HWSETTINGS_CC_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_CC_RCVRPORT_OUTPUTS:
PIOS_Servo_Init(&pios_servo_rcvr_cfg);
break;
}
#else
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif /* PIOS_DEBUG_ENABLE_DEBUG_PINS */
switch(bdinfo->board_rev) {
case BOARD_REVISION_CC:
// Revision 1 with invensense gyros, start the ADC
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
#if defined(PIOS_INCLUDE_ADXL345)
PIOS_ADXL345_Init(pios_spi_flash_accel_id, 0);
#endif
break;
case BOARD_REVISION_CC3D:
// Revision 2 with L3GD20 gyros, start a SPI interface and connect to it
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
#if defined(PIOS_INCLUDE_MPU6000)
// Set up the SPI interface to the serial flash
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_Assert(0);
}
PIOS_MPU6000_Init(pios_spi_gyro_id,0,&pios_mpu6000_cfg);
init_test = PIOS_MPU6000_Test();
#endif /* PIOS_INCLUDE_MPU6000 */
break;
default:
PIOS_Assert(0);
}
PIOS_GPIO_Init();
/* Make sure we have at least one telemetry link configured or else fail initialization */
PIOS_Assert(pios_com_telem_rf_id || pios_com_telem_usb_id);
}
/**
* @}
*/
Reference in New Issue View Git Blame Copy Permalink