1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
LibrePilot/flight/board_hw_defs/coptercontrol/board_hw_defs.c
James Cotton 5ad37e691c USB: Update the USB configuration structure to include the GPIO that is used
for sensing and then load different config for CC and CC3D.  Updated the
bootloader as well.  Also changed the PIOS_USB_CheckAvailability function to
only return the sense signal and not the transfer_possible flag as this is not
set in time for the bootloader on CC3D for some reason.
2012-01-24 22:15:43 -06:00

1292 lines
31 KiB
C

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file board_hw_defs.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <pios_config.h>
#if defined(PIOS_INCLUDE_LED)
#include <pios_led_priv.h>
static const struct pios_led pios_leds_cc[] = {
[PIOS_LED_HEARTBEAT] = {
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
};
static const struct pios_led_cfg pios_led_cfg_cc = {
.leds = pios_leds_cc,
.num_leds = NELEMENTS(pios_leds_cc),
};
static const struct pios_led pios_leds_cc3d[] = {
[PIOS_LED_HEARTBEAT] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_50MHz,
},
},
},
};
static const struct pios_led_cfg pios_led_cfg_cc3d = {
.leds = pios_leds_cc3d,
.num_leds = NELEMENTS(pios_leds_cc3d),
};
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* Gyro interface */
void PIOS_SPI_gyro_irq_handler(void);
void DMA1_Channel2_IRQHandler() __attribute__ ((alias ("PIOS_SPI_gyro_irq_handler")));
void DMA1_Channel3_IRQHandler() __attribute__ ((alias ("PIOS_SPI_gyro_irq_handler")));
static const struct pios_spi_cfg pios_spi_gyro_cfg = {
.regs = SPI1,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8, /* 10 Mhz */
},
.use_crc = false,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC2 | DMA1_FLAG_TE2 | DMA1_FLAG_HT2 | DMA1_FLAG_GL2),
.init = {
.NVIC_IRQChannel = DMA1_Channel2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel2,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel3,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.sclk = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.mosi = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.slave_count = 1,
.ssel = {{
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
}},
};
static uint32_t pios_spi_gyro_id;
void PIOS_SPI_gyro_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_gyro_id);
}
/* Flash/Accel Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_flash_accel_irq_handler(void);
void DMA1_Channel4_IRQHandler() __attribute__ ((alias ("PIOS_SPI_flash_accel_irq_handler")));
void DMA1_Channel5_IRQHandler() __attribute__ ((alias ("PIOS_SPI_flash_accel_irq_handler")));
static const struct pios_spi_cfg pios_spi_flash_accel_cfg_cc3d = {
.regs = SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8,
},
.use_crc = false,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
.init = {
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel4,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel5,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.slave_count = 2,
.ssel = {{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
}},{
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
}},
};
static const struct pios_spi_cfg pios_spi_flash_accel_cfg_cc = {
.regs = SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8,
},
.use_crc = false,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
.init = {
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel4,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel5,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.slave_count = 2,
.ssel = {{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
}},{
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
}},
};
static uint32_t pios_spi_flash_accel_id;
void PIOS_SPI_flash_accel_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_flash_accel_id);
}
#endif /* PIOS_INCLUDE_SPI */
/*
* ADC system
*/
#include "pios_adc_priv.h"
extern void PIOS_ADC_handler(void);
void DMA1_Channel1_IRQHandler() __attribute__ ((alias("PIOS_ADC_handler")));
// Remap the ADC DMA handler to this one
static const struct pios_adc_cfg pios_adc_cfg = {
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
.init = {
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel1,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t) & ADC1->DR,
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
}
},
.half_flag = DMA1_IT_HT1,
.full_flag = DMA1_IT_TC1,
};
struct pios_adc_dev pios_adc_devs[] = {
{
.cfg = &pios_adc_cfg,
.callback_function = NULL,
},
};
uint8_t pios_adc_num_devices = NELEMENTS(pios_adc_devs);
void PIOS_ADC_handler() {
PIOS_ADC_DMA_Handler();
}
#include "pios_tim_priv.h"
static const TIM_TimeBaseInitTypeDef tim_1_2_3_4_time_base = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_1_cfg = {
.timer = TIM1,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_2_cfg = {
.timer = TIM2,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_3_cfg = {
.timer = TIM3,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_4_cfg = {
.timer = TIM4,
.time_base_init = &tim_1_2_3_4_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_channel pios_tim_rcvrport_all_channels[] = {
{
.timer = TIM4,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap_TIM3,
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
};
static const struct pios_tim_channel pios_tim_servoport_all_pins[] = {
{
.timer = TIM4,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM1,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap_TIM3,
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
};
static const struct pios_tim_channel pios_tim_servoport_rcvrport_pins[] = {
{
.timer = TIM4,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM1,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap_TIM3,
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
// Receiver port pins
// S3-S6 inputs are used as outputs in this case
{
.timer = TIM3,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM2,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
};
#if defined(PIOS_INCLUDE_USART)
#include "pios_usart_priv.h"
static const struct pios_usart_cfg pios_usart_generic_main_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
static const struct pios_usart_cfg pios_usart_generic_flexi_cfg = {
.regs = USART3,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#if defined(PIOS_INCLUDE_DSM)
/*
* Spektrum/JR DSM USART
*/
#include <pios_dsm_priv.h>
static const struct pios_usart_cfg pios_usart_dsm_main_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 115200,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static const struct pios_dsm_cfg pios_dsm_main_cfg = {
.bind = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
};
static const struct pios_usart_cfg pios_usart_dsm_flexi_cfg = {
.regs = USART3,
.init = {
.USART_BaudRate = 115200,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static const struct pios_dsm_cfg pios_dsm_flexi_cfg = {
.bind = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
};
#endif /* PIOS_INCLUDE_DSM */
#if defined(PIOS_INCLUDE_SBUS)
/*
* S.Bus USART
*/
#include <pios_sbus_priv.h>
static const struct pios_usart_cfg pios_usart_sbus_main_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 100000,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_Even,
.USART_StopBits = USART_StopBits_2,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static const struct pios_sbus_cfg pios_sbus_cfg = {
/* Inverter configuration */
.inv = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.gpio_clk_func = RCC_APB2PeriphClockCmd,
.gpio_clk_periph = RCC_APB2Periph_GPIOB,
.gpio_inv_enable = Bit_SET,
};
#endif /* PIOS_INCLUDE_SBUS */
#endif /* PIOS_INCLUDE_USART */
#if defined(PIOS_INCLUDE_COM)
#include "pios_com_priv.h"
#endif /* PIOS_INCLUDE_COM */
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler (void);
void RTC_IRQHandler() __attribute__ ((alias ("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div128,
.prescaler = 100,
.irq = {
.init = {
.NVIC_IRQChannel = RTC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler (void)
{
PIOS_RTC_irq_handler ();
}
#endif
#if defined(PIOS_INCLUDE_SERVO) && defined(PIOS_INCLUDE_TIM)
/*
* Servo outputs
*/
#include <pios_servo_priv.h>
const struct pios_servo_cfg pios_servo_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_servoport_all_pins,
.num_channels = NELEMENTS(pios_tim_servoport_all_pins),
};
const struct pios_servo_cfg pios_servo_rcvr_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_servoport_rcvrport_pins,
.num_channels = NELEMENTS(pios_tim_servoport_rcvrport_pins),
};
#endif /* PIOS_INCLUDE_SERVO && PIOS_INCLUDE_TIM */
/*
* PPM Inputs
*/
#if defined(PIOS_INCLUDE_PPM)
#include <pios_ppm_priv.h>
const struct pios_ppm_cfg pios_ppm_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
/* Use only the first channel for ppm */
.channels = &pios_tim_rcvrport_all_channels[0],
.num_channels = 1,
};
#endif /* PIOS_INCLUDE_PPM */
/*
* PWM Inputs
*/
#if defined(PIOS_INCLUDE_PWM)
#include <pios_pwm_priv.h>
const struct pios_pwm_cfg pios_pwm_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.channels = pios_tim_rcvrport_all_channels,
.num_channels = NELEMENTS(pios_tim_rcvrport_all_channels),
};
#endif
#if defined(PIOS_INCLUDE_I2C)
#include <pios_i2c_priv.h>
/*
* I2C Adapters
*/
void PIOS_I2C_flexi_adapter_ev_irq_handler(void);
void PIOS_I2C_flexi_adapter_er_irq_handler(void);
void I2C2_EV_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexi_adapter_ev_irq_handler")));
void I2C2_ER_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexi_adapter_er_irq_handler")));
static const struct pios_i2c_adapter_cfg pios_i2c_flexi_adapter_cfg = {
.regs = I2C2,
.init = {
.I2C_Mode = I2C_Mode_I2C,
.I2C_OwnAddress1 = 0,
.I2C_Ack = I2C_Ack_Enable,
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
.I2C_DutyCycle = I2C_DutyCycle_2,
.I2C_ClockSpeed = 400000, /* bits/s */
},
.transfer_timeout_ms = 50,
.scl = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.sda = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.event = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_EV_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.error = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_ER_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
uint32_t pios_i2c_flexi_adapter_id;
void PIOS_I2C_flexi_adapter_ev_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_EV_IRQ_Handler(pios_i2c_flexi_adapter_id);
}
void PIOS_I2C_flexi_adapter_er_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_ER_IRQ_Handler(pios_i2c_flexi_adapter_id);
}
#endif /* PIOS_INCLUDE_I2C */
#if defined(PIOS_INCLUDE_GCSRCVR)
#include "pios_gcsrcvr_priv.h"
#endif /* PIOS_INCLUDE_GCSRCVR */
#if defined(PIOS_INCLUDE_RCVR)
#include "pios_rcvr_priv.h"
#endif /* PIOS_INCLUDE_RCVR */
#if defined(PIOS_INCLUDE_USB)
#include "pios_usb_priv.h"
static const struct pios_usb_cfg pios_usb_main_cfg_cc = {
.irq = {
.init = {
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.vsense = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
}
};
static const struct pios_usb_cfg pios_usb_main_cfg_cc3d = {
.irq = {
.init = {
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.vsense = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
}
};
#include "pios_usb_board_data_priv.h"
#include "pios_usb_desc_hid_cdc_priv.h"
#include "pios_usb_desc_hid_only_priv.h"
#endif /* PIOS_INCLUDE_USB */
#if defined(PIOS_INCLUDE_COM_MSG)
#include <pios_com_msg_priv.h>
#endif /* PIOS_INCLUDE_COM_MSG */
#if defined(PIOS_INCLUDE_USB_HID)
#include <pios_usb_hid_priv.h>
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
.data_if = 0,
.data_rx_ep = 1,
.data_tx_ep = 1,
};
#endif /* PIOS_INCLUDE_USB_HID */
#if defined(PIOS_INCLUDE_USB_CDC)
#include <pios_usb_cdc_priv.h>
const struct pios_usb_cdc_cfg pios_usb_cdc_cfg = {
.ctrl_if = 1,
.ctrl_tx_ep = 2,
.data_if = 2,
.data_rx_ep = 3,
.data_tx_ep = 3,
};
#endif /* PIOS_INCLUDE_USB_CDC */