mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-04 12:24:11 +01:00
315 lines
8.6 KiB
C
315 lines
8.6 KiB
C
/**
|
|
******************************************************************************
|
|
* @addtogroup OpenPilotBL OpenPilot BootLoader
|
|
* @{
|
|
*
|
|
* @file pios_board.c
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
|
* @brief Defines board specific static initialisers for hardware for the OpenPilot board.
|
|
* @see The GNU Public License (GPL) Version 3
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <pios.h>
|
|
//#include <openpilot.h>
|
|
//#include <uavobjectsinit.h>
|
|
|
|
#if defined(PIOS_INCLUDE_SPI)
|
|
|
|
#include <pios_spi_priv.h>
|
|
|
|
/* AHRS Interface
|
|
*
|
|
* NOTE: Leave this declared as const data so that it ends up in the
|
|
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
|
|
*/
|
|
void PIOS_SPI_ahrs_irq_handler(void);
|
|
void DMA1_Channel4_IRQHandler() __attribute__ ((alias ("PIOS_SPI_ahrs_irq_handler")));
|
|
void DMA1_Channel5_IRQHandler() __attribute__ ((alias ("PIOS_SPI_ahrs_irq_handler")));
|
|
const struct pios_spi_cfg
|
|
pios_spi_ahrs_cfg = {
|
|
.regs = SPI2,
|
|
.init = {
|
|
.SPI_Mode = SPI_Mode_Master,
|
|
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
|
.SPI_DataSize = SPI_DataSize_8b,
|
|
.SPI_NSS = SPI_NSS_Soft,
|
|
.SPI_FirstBit = SPI_FirstBit_MSB,
|
|
.SPI_CRCPolynomial = 7,
|
|
.SPI_CPOL = SPI_CPOL_High,
|
|
.SPI_CPHA = SPI_CPHA_2Edge,
|
|
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8,
|
|
},
|
|
.use_crc = TRUE,
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
|
|
.irq = {
|
|
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
|
|
.rx = {
|
|
.channel = DMA1_Channel4,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
.tx = {
|
|
.channel = DMA1_Channel5,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralDST,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
}, .ssel = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_12,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
}, .sclk = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_13,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
}, .miso = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_14,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
}, .mosi = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
}, };
|
|
|
|
uint32_t pios_spi_ahrs_id;
|
|
void PIOS_SPI_ahrs_irq_handler(void) {
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_SPI_IRQ_Handler(pios_spi_ahrs_id);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_SPI */
|
|
|
|
#if defined(PIOS_INCLUDE_USART)
|
|
|
|
#include "pios_usart_priv.h"
|
|
|
|
/*
|
|
* Telemetry USART
|
|
*/
|
|
const struct pios_usart_cfg pios_usart_telem_cfg = {
|
|
.regs = USART2,
|
|
.init = {
|
|
#if defined (PIOS_COM_TELEM_BAUDRATE)
|
|
.USART_BaudRate = PIOS_COM_TELEM_BAUDRATE,
|
|
#else
|
|
.USART_BaudRate = 57600,
|
|
#endif
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
}, .irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART2_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
}, .rx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_3,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
}, .tx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_2,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
}, };
|
|
|
|
#endif /* PIOS_INCLUDE_USART */
|
|
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
|
|
#include "pios_com_priv.h"
|
|
|
|
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 192
|
|
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 192
|
|
|
|
static uint8_t pios_com_telem_rf_rx_buffer[PIOS_COM_TELEM_RF_RX_BUF_LEN];
|
|
static uint8_t pios_com_telem_rf_tx_buffer[PIOS_COM_TELEM_RF_TX_BUF_LEN];
|
|
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
|
|
// ***********************************************************************************
|
|
|
|
#if defined(PIOS_INCLUDE_COM_MSG)
|
|
|
|
#include <pios_com_msg_priv.h>
|
|
|
|
#endif /* PIOS_INCLUDE_COM_MSG */
|
|
|
|
// ***********************************************************************************
|
|
|
|
#if defined(PIOS_INCLUDE_USB)
|
|
#include "pios_usb_priv.h"
|
|
|
|
static const struct pios_usb_cfg pios_usb_main_cfg = {
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
#include "pios_usb_board_data_priv.h"
|
|
#include "pios_usb_desc_hid_only_priv.h"
|
|
|
|
#endif /* PIOS_INCLUDE_USB */
|
|
|
|
#if defined(PIOS_INCLUDE_USB_HID)
|
|
#include <pios_usb_hid_priv.h>
|
|
|
|
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
|
|
.data_if = 0,
|
|
.data_rx_ep = 1,
|
|
.data_tx_ep = 1,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_USB_HID */
|
|
|
|
uint32_t pios_com_telem_rf_id;
|
|
uint32_t pios_com_telem_usb_id;
|
|
|
|
#include "pios_opahrs.h"
|
|
|
|
/**
|
|
* PIOS_Board_Init()
|
|
* initializes all the core subsystems on this specific hardware
|
|
* called from System/openpilot.c
|
|
*/
|
|
static bool board_init_complete = false;
|
|
void PIOS_Board_Init(void) {
|
|
if (board_init_complete) {
|
|
return;
|
|
}
|
|
|
|
/* Enable Prefetch Buffer */
|
|
FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
|
|
|
|
/* Flash 2 wait state */
|
|
FLASH_SetLatency(FLASH_Latency_2);
|
|
|
|
/* Delay system */
|
|
PIOS_DELAY_Init();
|
|
|
|
/* Initialize the PiOS library */
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
uint32_t pios_usart_telem_rf_id;
|
|
if (PIOS_USART_Init(&pios_usart_telem_rf_id, &pios_usart_telem_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_usart_com_driver,
|
|
pios_usart_telem_rf_id,
|
|
pios_com_telem_rf_rx_buffer, sizeof(pios_com_telem_rf_rx_buffer),
|
|
pios_com_telem_rf_tx_buffer, sizeof(pios_com_telem_rf_tx_buffer))) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
|
|
PIOS_GPIO_Init();
|
|
|
|
#if defined(PIOS_INCLUDE_USB)
|
|
/* Initialize board specific USB data */
|
|
PIOS_USB_BOARD_DATA_Init();
|
|
|
|
/* Activate the HID-only USB configuration */
|
|
PIOS_USB_DESC_HID_ONLY_Init();
|
|
|
|
uint32_t pios_usb_id;
|
|
if (PIOS_USB_Init(&pios_usb_id, &pios_usb_main_cfg)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
#if defined(PIOS_INCLUDE_USB_HID) && defined(PIOS_INCLUDE_COM_MSG)
|
|
uint32_t pios_usb_hid_id;
|
|
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
if (PIOS_COM_MSG_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id)) {
|
|
PIOS_Assert(0);
|
|
}
|
|
#endif /* PIOS_INCLUDE_USB_HID && PIOS_INCLUDE_COM_MSG */
|
|
|
|
#endif /* PIOS_INCLUDE_USB */
|
|
|
|
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_CRC, ENABLE);//TODO Tirar
|
|
|
|
/* Set up the SPI interface to the AHRS */
|
|
if (PIOS_SPI_Init(&pios_spi_ahrs_id, &pios_spi_ahrs_cfg)) {
|
|
PIOS_DEBUG_Assert(0);
|
|
}
|
|
|
|
/* Bind the AHRS comms layer to the AHRS SPI link */
|
|
PIOS_OPAHRS_Attach(pios_spi_ahrs_id);
|
|
|
|
board_init_complete = true;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|