LibrePilot

libraries

LP626 fix for new toolchain

2022-02-17 15:41:37 +01:00

pios_adxl345.c

LP626 fix for new toolchain

2022-02-17 15:41:37 +01:00

pios_bma180.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_bmp085.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_bmp280.c

LP-553 Add dRonin/TauLabs to @author tag in pios_bmp280.c

2017-10-08 12:29:36 +02:00

pios_board_info.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_board_io.c

LP-117 FRsky SPort: modifications to compile with current "next"

2019-07-06 14:33:02 +02:00

pios_board_sensors.c

LP-580 Change PIOS_INCLUDE_HMC5X83 to PIOS_INCLUDE_SENSORS_AUXMAG where it applies to general auxmag support.

2018-02-23 13:19:41 +01:00

pios_callbackscheduler.c

Raise callbackscheduler stack size

2015-05-18 21:30:03 +02:00

pios_com_msg.c

OP-1275 - add ChangeBaud to PIOS_COM_MSG

2014-09-16 00:42:51 +02:00

pios_com.c

Merged in LP-457_autoconfig_low_baud (pull request #535 )

2022-06-14 20:45:12 +00:00

pios_crc.c

OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)

2014-01-12 15:12:41 +01:00

pios_debuglog.c

LP-381 - Adds circular buffer and run writes within a separate callback

2016-08-17 19:57:29 +02:00

pios_deltatime.c

OP-1211 removed unneeded define

2014-02-06 19:34:34 +01:00

pios_dosfs_logfs.c

Yaffs or dosfs now conditional linkage for simposix yaffs testing

2014-10-28 08:48:38 +11:00

pios_dsm.c

LP-480 DSM: do not fail to initialize driver for ports without bind capability.

2017-04-27 16:27:53 +02:00

pios_etasv3.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_exbus.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_flash_eeprom.c

REVONANO - emulate bigger sector size for erase operations

2015-05-18 21:30:02 +02:00

pios_flash_jedec.c

LP-512 PikoBLX board added

2017-05-25 22:08:38 +02:00

pios_flashfs_logfs.c

LP-83 fix two known bricking scenarios

2015-12-16 01:46:59 -05:00

pios_flashfs_objlist.c

REVONANO - Fix erase settings

2015-05-18 21:30:02 +02:00

pios_gcsrcvr.c

OP-943 uses pios_mem API for heap allocation

2014-06-11 22:15:40 +02:00

pios_hcsr04.c

OP-943 uses pios_mem API for heap allocation

2014-06-11 22:15:40 +02:00

pios_hmc5x83.c

LP-423 - Modified IRQHandler

2016-09-30 23:24:09 +02:00

pios_hmc5843.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hott.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_i2c_esc.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_iap.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ibus.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_instrumentation.c

OP-1365 - adds quick and dirty decays to max and min values

2015-02-03 00:00:05 +01:00

pios_l3gd20.c

OP-1658 - Fixes to other (old and deprecated) sensors

2015-02-03 00:00:05 +01:00

pios_led.c

Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.

2013-07-28 07:01:08 -07:00

pios_logfs.c

uncrustification!

2014-11-08 12:59:16 +01:00

pios_mem.c

OP-1804: Add realloc.

2015-04-16 22:52:09 -07:00

pios_mpu6000.c

LP-529 [F3] [I2C] Move i2c bus unlocking down to irq, to save one context switch and make bus available for use by other drivers sooner.

2017-06-14 16:10:50 +02:00

pios_mpu9250.c

LP-512 Initial F3 support

2017-05-25 22:08:16 +02:00

pios_mpxv.c

OP-1869 "scale" lower case

2015-05-13 21:55:18 +02:00

pios_ms56xx.c

LP626 fix for new toolchain

2022-02-17 15:41:37 +01:00

pios_ms4525do.c

OP-1273 OP-1282 OP-1283 uncrustify

2014-03-31 22:17:58 +02:00

pios_notify.c

LP-361 - Don't lose notifications when more than an alarm is active

2016-07-17 17:13:09 +02:00

pios_openlrs_rcvr.c

LP-518 Add Quality_Get to OpenLRS receiver and update OPlink_Receiver with Rssi and LinkQuality

2019-02-21 22:38:04 +01:00

pios_openlrs.c

LP-518 OpenLRS: Simple beacon tone, cpu free. Apply to Sparky2 and Revo

2019-02-21 22:38:04 +01:00

pios_oplinkrcvr.c

LP-518 OPLink receiver: Update Rssi and Link quality

2019-02-21 22:38:04 +01:00

pios_qmc5883l.c

LP-580 QMC5883L: added DRDY timeout, so that driver can reinit chip

2018-02-23 13:19:25 +01:00

pios_rcvr.c

OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined

2015-04-20 21:40:42 +01:00

pios_rfm22b_com.c

LP-437 - Add support for a secondary radio stream and associated AuxCom driver

2017-01-06 16:02:28 +01:00

pios_rfm22b.c

LP626 fix for new toolchain

2022-02-17 15:41:37 +01:00

pios_sbus.c

LP-512 Initial F3 support

2017-05-25 22:08:16 +02:00

pios_sdcard.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_sdp3x.c

LP-623 Added suport SDP3x I2C Differential Pressure/Airspeed sensor on Flexi Port - tested

2021-10-08 21:07:28 +02:00

pios_semaphore.c

LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.

2016-07-12 17:45:33 -07:00

pios_sensors.c

LP-281 use correct operator

2016-04-07 01:00:42 +02:00

pios_servo.c

LP-584 Fix servo driver to not touch unused pins in _disable() function. Fix adc channel for servo6 on revolution & sparky2 targets.

2018-03-11 00:41:50 +01:00

pios_srxl.c

LP-480 Move PIOS_COM_SetHalfDuplex() functionality to IOCTL. Remove RX/TX mode and change parameter order for PIOS_COM_ChangeConfig() and com driver set_config to match the databits/parity/stopbits scheme (like for example 8N1).

2017-04-24 13:04:23 +02:00

pios_task_monitor.c

LP-96 - Implement CPU idle counters and calibration functions

2015-09-03 20:05:25 +02:00

pios_thread.c

LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.

2016-07-12 17:45:33 -07:00

pios_trace.c

uncrustification!

2014-11-08 12:59:16 +01:00

pios_ubx_dcc.c

LP-537 Remove requirement for left shifting I2C addresses on the F0 devices. This makes the I2C driver on F0 compatible with the other devices.

2017-06-24 15:08:16 -07:00

pios_usb_desc_hid_cdc.c

LP-480 Moved sensors initialization to pios_board_sensors.c

2017-04-24 13:03:07 +02:00

pios_usb_desc_hid_only.c

LP-480 work in progress: revo, nano & sparky2 targets ok.

2017-04-24 12:55:06 +02:00

pios_usb_util.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_video.c

LP626 fix for new toolchain

2022-02-17 15:41:37 +01:00

pios_wavplay.c

LP-72 Various typo fixes - Set PPM input as default

2016-05-25 13:51:41 +02:00